Mini-Span ADSS Cable
|
|
|
- Leo Patterson
- 6 years ago
- Views:
Transcription
1 AFL Mini-Span All-Dielectric Self-Supporting (ADSS) cable is designed for outside plant aerial and duct applications in local and campus network loop architectures. From poleto-build to town-town installations, the Mini-Span cabling system, which includes cables, suspension, dead end and termination enclosures, offers a comprehensive transmission circuit infrastructure with proven, high-reliability performance. See AFL s Fiber Optic Cable Hardware catalog for more information. As the ADSS cabling concept implies, a separate messenger support wire hanging system is not required, greatly reducing installation time and improving upfront and maintenance labor costs. Temperature Range Operating: -40ºC to +70ºC Storage: -50ºC to +70ºC Installation: -30ºC to +70ºC Mini-Span includes fiber counts up to 96 optical fibers and any type or combination of single-mode and laser-optimized multimode fibers with the cable. Pole-to-Pole span lengths range from 50 feet to over 1000 feet. Installation Information NESC SPANS (@ 1.5% INITIAL SAG) FEET (METERS) MAX. SAGGING TENSION MAX. LOADING OPERATING TENSION RADIUS (DYNAMIC) RADIUS (STATIC) LIGHT MEDIUM HEAVY LBS N LBS N INCHES CM INCHES CM Mini-Span (152) 300 (91) 175 (53) Mini-Span (137) 300 (91) 180 (55) , NESC SPANS (@ 1% INITIAL SAG) FEET (METERS) MAX. SAGGING TENSION MAX. LOADING OPERATING TENSION RADIUS (DYNAMIC) RADIUS (STATIC) LIGHT MEDIUM HEAVY LBS N LBS N INCHES CM INCHES CM Mini-Span (183) 440 (134) 275 (84) Mini-Span (320) 850 (259) 575 (175) 1,306 5,809 1,783 7, Optical Information MAXIMUM ATTENUATION (db/km) *62.5/125 µm 50/125 µm SINGLE-MODE (1310 nm/1550 nm) (850 nm/1300 nm) (850 nm/1300 nm) Mini-Span / / /1.2 Mini-Span / / /0.9 Mini-Span 424 Mini-Span 535 SINGLE-MODE (1310 nm/1550 nm) BANDWIDTH (MHz km) *62.5/125 µm (850 nm/1300 nm) 50/125 µm (850 nm/1300 nm) n/a 200/ /500 * All 62.5/125 µm multimode ADSS cable transmission performances meet or exceed FDDI requirements. Premium transmission performance fibers available on request. 97
2 Mechanical Data NOMINAL NOMINAL MAXIMUM LENGTHS* FIBER DIAMETER WEIGHT SINGLE-MODE COUNT INCHES MM LBS/1000 KG/KM FEET METERS FEET METERS Mini-Span ,800 10,000 26,250 8,000 Mini-Span ,800 10,000 26,250 8,000 Mini-Span ,800 10,000 26,250 8,000 Mini-Span ,800 10,000 26,250 8,000 * Longer lengths may be available upon request. Ordering Information Mini-Span 323 Mini-Span 383 Mini-Span 424 Mini-Span 535 FIBER FIBERS NUMBER OF AFL NO. COUNT PER TUBE TUBES / FIBERS SINGLE-MODE 62.5/125 50/ w/6 AE AA1 AE AA1 AE AA w/6 AE AA1 AE AA1 AE AA w/6 AE AA1 AE AA1 AE AA w/6 AE AA1 AE AA1 AE AA w/6 (3 fillers) AE0069C420AA0 AE0066C420AA0 AE0065C420AA w/12 (3 fillers) AE0129C420AA0 AE0126C420AA0 AE0125C420AA w/12, 1 w/6 (2 fillers) AE0189C420AA0 AE0186C420AA0 AE0185C420AA w/12 (2 fillers) AE0249C420AA0 AE0246C420AA0 AE0245C420AA w/12, 1 w/6 (1 filler) AE0309C420AA0 AE0306C420AA0 AE0305C420AA w/12 (1 filler) AE0369C420AA0 AE0366C420AA0 AE0365C420AA w/12 AE0489C420AA0 AE0486C420AA0 AE0485C420AA w/6 (4 fillers) AE0069C520AA4 AE0066C520AA4 AE0065C520AA w/12 (4 fillers) AE0129C520AA4 AE0126C520AA4 AE0125C520AA w/12, 1 w/6 (3 fillers) AE0189C520AA4 AE0186C520AA4 AE0185C520AA w/12 (3 fillers) AE0249C520AA4 AE0246C520AA4 AE0245C520AA w/12, 1 w/6 (2 fillers) AE0309C520AA4 AE0306C520AA4 AE0305C520AA w/12 (2 fillers) AE0369C520AA4 AE0366C520AA4 AE0365C520AA w/12 (1 filler) AE0489C520AA4 AE0486C520AA4 AE0485C520AA w/12 (no fillers) AE0609C520AA4 AE0606C520AA4 AE0605C520AA w/6 (7 fillers) AE0069C820EA7 AE0066C820EA7 AE0065C820EA w/12 (7 fillers) AE0129C820EA7 AE0126C820EA7 AE0125C820EA w/12, 1 w/6 (6 fillers) AE0189C820EA7 AE0186C820EA7 AE0185C820EA w/12 (6 fillers) AE0249C820EA7 AE0246C820EA7 AE0245C820EA w/12, 1 w/6 (5 fillers) AE0309C820EA7 AE0306C820EA7 AE0305C820EA w/12 (5 fillers) AE0369C820EA7 AE0366C820EA7 AE0365C820EA w/12 (4 fillers) AE0489C820EA7 AE0486C820EA7 AE0485C820EA w/12 (3 fillers) AE0609C820EA7 AE0606C820EA7 AE0605C820EA w/12 (2 fillers) AE0729C820EA7 AE0726C820EA7 AE0725C820EA w/12 (1 filler) AE0849C820EA7 AE0846C820EA7 AE0845C820EA w/12 (no fillers) AE0969C820EA7 AE0966C820EA7 AE0965C820EA7 Contact customer service for price and availability. Non-zero dispersion-shifted fibers are also available. 98
3 Sag and Tension Information MINI-SPAN 323 MINI-SPAN 383 INITIAL INITIAL NESC LIGHT LOADING NESC MEDIUM LOADING NESC HEAVY LOADING SPAN SAG TENSION SAG TENSION SAG TENSION SAG TENSION FEET METERS % LBS N % LBS N % LBS N % LBS N , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,750 Typical Cable Components 4 Position 323 or 383 polyethylene outer jacket tape torque balanced aramid ripcord FRP central member gel-filled loose buffer tube with optical fibers water-blocking system 99
4 Sag and Tension Information MINI-SPAN 424 INITIAL INITIAL NESC LIGHT LOADING NESC MEDIUM LOADING NESC HEAVY LOADING SPAN SAG TENSION SAG TENSION SAG TENSION SAG TENSION FEET METERS % LBS N % LBS N % LBS N % LBS N , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,078 Typical Cable Components 5 Position 424 polyethylene outer jacket tape torque balanced aramid ripcord FRP central member gel-filled loose buffer tube with optical fibers water-blocking system 100
5 Sag and Tension Information MINI-SPAN 535 INITIAL INITIAL NESC LIGHT LOADING NESC MEDIUM LOADING NESC HEAVY LOADING SPAN SAG TENSION SAG TENSION SAG TENSION SAG TENSION FEET METERS % LBS N % LBS N % LBS N % LBS N , , , , , , , , , , , , , , , , , , ,082 4, , , , ,210 5, , , , ,334 5, , , ,076 4, ,454 6, , , ,166 5, ,571 6, , ,045 4, ,255 5, ,685 7, , ,083 4, ,299 5, ,741 7, , ,121 4, ,342 5, , ,196 5, ,428 6, , ,270 5, ,513 6, , ,344 5, ,597 7, , ,417 6, ,679 7, ,057 4, ,489 6, ,761 7, ,119 4, ,561 6, ,181 5, ,633 7,263 1, ,243 5, ,704 7,579 1, ,306 5, ,775 7,894 Typical Cable Components 8 Position 535 polyethylene outer jacket tape torque balanced aramid ripcord FRP central member gel-filled loose buffer tube with optical fibers water-blocking system 101
6 Reel Information REEL SPECS REEL A REEL B REEL C REEL D REEL E ITEM INCHES CM INCHES CM INCHES CM INCHES CM INCHES CM Reel Height Reel Width Outside Reel Width Inside Drum Diameter Arbor Hole Diameter Reel Weight with Lagging 180 lbs 82 kg 420 lbs 191 kg 685 lbs 311 kg 710 lbs 320 kg 950 lbs 431 kg MAXIMUM LENGTH (feet/meters) Mini-Span ,256 ft 4,650 m 32,800 ft 10,000 m Mini-Span ,827 ft 3,300 m 25,202 ft 7,700 m 32,800 ft 10,000 m Mini-Span 424 8,850 ft 2,700 m 20,250 ft 6,200 m 26,250 ft 8,000 m 32,800 ft 10,000 m Mini-Span 484 6,500 ft 2,000 m 15,750 ft 4,800 m 21,000 ft 6,450 m 32,800 ft 10,000 m Mini-Span 535 5,500 ft 1,675 m 12,800 ft 3,900 m 17,225 ft 5,250 m 26,000 ft 6,920 m 32,800 ft 10,000 m AFL provides ADSS cable on several standard sizes of non-returnable wooden reels. Non-standard reel sizes are available on request. 102
ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable
...... ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable Water Blocking Binders... Ripcord Optical Fibers...... Flexible Buffer Tube Jacket (polyethylene) (3.0 mm) Aramid Strength Yarns......
ezspan ADSS All-dielectric self-supporting loose tube cable
All-dielectric self-supporting loose tube cable MANUFACTURED IN Aramid Strength Yarns Inner Jacket Polyethylene (optional) Central Strength Member Water Blocking Material Gel-Filled Buffer Tube Containing
fiber optic cable Outdoor Cables
fiber optic cable Outdoor Outdoor Cables CST Armored cables for direct-buried applications Product specifications Outdoor Cables OC 1 CST & FRP Armor Applications Ideal for installation where direct-burial
Long Span ADSS All-dielectric self-supporting loose tube cable
Long ADSS l-dielectric self-supporting loose tube cable MANUFACTURED IN HDPE Outer Jacket Aramid Strength Yarns Inner Jacket Polyethylene (optional) Central Strength Member Water Blocking Tube Gel-Filled
Datasheet Outside Plant Cable
Outside Plant Cable Direct Buried Cable Direct buried cable can be buried directly into the ground in a trench or using a vibratory plow. Except for with great water-blocking and moisture-proof performance,
ENTERPRISE FIBER OPTIC CABLE. Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore
ENTERPRISE FIBER OPTIC CABLE Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore Founded in 1984, AFL is a global leader providing fiber optic products, equipment, and engineering services to the
ezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm)
...... ezprep Gel-Free Loose Tube Gel-Free Loose Tube Cable (2.5mm) Optical Fibers Water Blocking Binders... Ripcord Jacket (polyethylene) Draka Optical Cable... Central Strength Member Flexible Buffer
Volition. Fiber Optic Cable. 3Innovation
Volition Fiber Optic Cable Tough enough to take it. Easy to handle. Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm
ENTERPRISE FIBER OPTIC CABLE. Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore
ENTERPRISE FIBER OPTIC CABLE Interconnect Indoor Indoor/Outdoor Outdoor ADSS MicroCore Founded in 1984, AFL is a global leader providing fiber optic products, equipment, and engineering services to the
Fiber Optic, Breakout cable, tight buffered, 900 microns
Fiber Optic, Breakout cable, tight buffered, 900 microns Features and benefits Fiber-count 2-144 fibers 900 microns buffered design for easy termination Tight buffered construction Plenum (OFNP / FT6),
OPGW and ADSS Fiber Cable. For Overhead Transmission Lines
OPGW and ADSS Fiber Cable For Overhead Transmission Lines PRYSMIAN GROUP VISION, MISSION, VALUES Vision The Prysmian Group believes in the effective, efficient and sustainable supply of Energy and Information
Basic design adapted to Telcordia GR409-CORE / TIA/EIA 568B.3 / ICEA-S
ADDISON Flame Retardant Tight Buffered Distribution Optic cables MTA-B-C-D-Y Tight Buffer Coating Glass Yarn Ripcord(optional) PVC Outer Sheath APPLICATION This cables are used for interconnection of distribution
Mining and Petrochemical Tray-Rated Fiber Optic Cables
Features and Benefits Loose tube construction Stable and highly reliable transmission parameters Waterblocking technology Allows efficient and craft-friendly cable preparation Extra tough double jackets
Mini Breakout Distribution Cable Multi-core ( Fibres)
Mini Breakout Distribution Cable Multi-core (12-144 Fibres) 12 to 144 fibre mini breakout multi-core distribution cable, consists of 4 to 8 individually coloured, 12 fibre stranded sub units around an
Volition Fiber Optic Cable
Volition Fiber Optic Cable The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm and 50/125 µm multimode fiber, and 9/125 µm single-mode fiber. The horizontal cable
ExpressLT Dry Dry Loose Tube Cable (2.5 mm)
MANUFACTURED IN A versatile, multi-purpose fiber cable designed for ease of use and Buffer Tube Mid-Span Storage applications Overview Prysmian s popular ExpressLT cable combines buffer tubes with enhanced
P R O D U C T C AT A L O G T ALOG
2 0 0 2 2002 PRODUCT CATALOG Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized
Optical Fibre Fibre Cables
Optical Fibre Fibre Cables Table of content Nexans 3 Nexans UK 4 Symbols 5 Fibre Cables 6 Optical cable speci cations 7 LANmark-OF Tight Buffer Indoor 10 LANmark-OF Tight Buffer Universal 13 LANmark-OF
OPTICAL GROUND WIRE & A CCESSORIES. Traditional High Fiber Count Hardware & Accessories
OPTICAL GROUND WIRE & A CCESSORIES Traditional High Fiber Count Hardware & Accessories AFL Optical Ground Wire has set the standard through product innovation and engineering excellence, which is reinforced
O P T I C A L F I B R E C A B L E S CONTRIBUTING TO DIGITAL INDIA
O P T I C A L F I B R E C A B L E S CONTRIBUTING TO DIGITAL INDIA CONTENTS Single Tube Unarmoured Cable Multi - Tube Single Sheath Unarmoured Cable 2 Multi - Tube Ribbon Type Unarmoured Cable 3 Single
Application Specification. Optical Fiber. Aramid Yarns. 2mm Subunit Jacket. Strength Rods. Outer Jacket
Application Specification 402-1012 February 28, 2017 Rev B Fiber Optic Breakout Cables Optical Fiber Aramid Yarns 2mm Subunit Jacket Strength Rods 2 Fiber Cable Outer Jacket 12 Fiber Cable Description:
2001 PRODUCT CA T ALOG
2001 PRODUCT CATALOG 2001 Need More Information? Visit our Web site at Instruction Sheets Cut Sheets White Papers Data Sheets Product/Part Number Searches AMP NETCONNECT Sales Engineer Contacts Authorized
OSP Fiber Optic Cable
OSP Fiber Optic Cable Installation and Handling Guidelines for Underground and Aerial Applications Howard Kemp Member of Technical Staff OFS Customer Support Engineering Outline Cable & Fiber Description
Micro Fibre Indoor Cable Multi-core (Up to 96 Fibres) Applications. Features
Micro Fibre Indoor Cable Multi-core (Up to 96 Fibres) 2 to 96 Micro fibre indoor cable, 12 fibre stranded sub units, 250µm coloured fibre around an fibre reinforced plastic (FRP) central non-metallic strength
MIC Plenum Cables, 2-24 Fibers
Features and Benefits 900 µm Buffered Fibers Easy, consistent stripping All-dielectric cable construction Requires no grounding or bonding Flame-retardant jacket Rugged and durable Standards Listings National
Plug & Play AnyLAN Systems
features and benefits Factory-terminated cables Watertight components with compact, rugged design Multi-fiber quick connect Factory tested Modular SPECIFICATION SHEET LAN-731-EN PAGE 1 Install with no
MIC Unitized Plenum Cables, Fibers
MIC Unitized Plenum Cables, 36-144 s Features and Benefits Six- or 12-fiber jacketed subunits Quick and easy identification 900 µm TBII Buffered s Easy, consistent stripping All-dielectric cable construction
SPECIALTY AND HARSH ENVIRONMENT FIBER OPTIC CABLE. Downhole Subsea Transit Mining Military
SPECIALTY AND HARSH ENVIRONMENT FIBER OPTIC CABLE Downhole Subsea Transit Mining Military Founded in 1984, AFL is an international manufacturer providing end-to-end solutions to the energy, service provider,
Interconnect Cable Simplex and Duplex
10.3 Interconnect Cable Simplex and Duplex Tight Buffer & Plenum Rated Patch panels Workstation equipment connections Horizontal distribution in open office environments Interconnect Cables are designed
50µm µlinx Avionics Cable
Summary of Results Supplemental Information for Qualified OFS Customer Use 50µm µlinx Avionics Cable p/n C26490 µlinx Optical Fiber Cable is a new reduced diameter product with an outer diameter of 0.8mm,
UNSHIELDED MULTI CONDUCTOR
PLTC 300 VOLT PVC Insulation 105 C, 300 Volts UNSHIELDED MULTI CONDUCTOR For use as instrumentation cable inside or outside in control applications. Suitable for installation in trays, troughs, channels,
Article number: Sheath marking ACE - TKF LTC-S RP 12x SM G.657.A1 (2x6) A-DQ(ZN)B2Y {Batch} {Year} {Length}
Description 12x SM G.657.A1 (2x6) The Loose Tube Cable Slim Rodent-Protected () is a non-metallic, loose tube outdoor duct cable, rodent protected, longitudinal water-protected, with high pulling force.
Outside Plant All Dielectric
Berk-Tek s Outside Plant Loose Tube ber optic cables are designed for installation in harsh enviroments such as direct burial, aerial lashing, conduit and pathways that are subjected to wide temperature
Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable
Indoor/Outdoor Cables Single-Armored, Plenum, Tight Buffered Distribution Indoor/Outdoor Cable Single-Armored Tight Buffered Tight buffered fibers are positioned in a flexible metal tube, which is filled
Laser Optimized Multimode
Solution Laser Optimized Multimode 1 Fiber optic LIU/489 FIU 2 Racks and cabinets 3 Equipment room: -600 G2 modular shelf and panel shelf -1000 G2 modular shelf and panel shelf 4 Telecom closet: -600 G2
Avionics Optical Cables
Your Optical Fiber Solutions Partner Avionics Optical Cables for Commercial and Defense Aircraft FlightLink Cables FlightGuide Cables Avioptics Cable www.specialtyphotonics.com OFS Your Optical Fiber Solutions
MPO MicroCable Trunk Assembly
Product updated on June 04, 2018 Trunk Assembly Trunks facilitate rapid deployment of high density backbone cabling in data centers or other high fiber density environments reducing network installation
75 OHM COAXIAL CABLE (RG6)
RG6 CABLE (RG6) Drop Cable RG6 UL listed as type CMG for indoor cables. RG-6. 18 AWG copper covered steel with nominal diameter of 0.040 inch (1.02mm). Gas injected foam polyolefin insulation. Nominal
Caledonian Fire Resistant Optic Fiber Cables
Fire Resistant Optic Cables Fire resistant Central Loose Optic cables Application These cables are characterized by light weight and small diameter, suitable for both aerial and duct installation. They
HITRONIC HQN Single-mode & Multi-mode Glass Optical Fiber Cable for Outdoor Applications
HQN Single-mode & Multi-mode Glass Optical Fiber Cable for Outdoor Applications HQN is an outdoor glass fiber optic cable available with up to 24 fibers. The cable design includes a loose central tube,
PROTOLON(FL)-LWL (N)TSFLCGEWOEU 3,6/6 kv: medium voltage flat reeling cable with fibre-optics
PROTOLON(FL)-LWL (N)TSFLCGEWOEU 3,6/6 kv: medium voltage flat reeling cable with Application Flexible medium voltage reeling cable for high mechanical stresses (e.g. dynamic tensile loads, multiple changes
Construction 2-24 tightly buffered fibres 900 m 50 m. colour code 1 Red 13 Yellow w/mark every 70 mm 2 Green 14 White w/mark every 70 mm 3 Blue 15 Gre
Universal indoor/outdoor distribution or mini breakout cable with ES9 tight buffer, 2 24 fibres and black FireBur sheath, VDE: U-V(ZN)H Application and Installation This distribution or mini-break-out
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 10 FOR UPDATED INSTRUCTIONS.
Going the Distance - Solving Power Reach Issues With Diverse DAS Solutions
GE Critical Power Going the Distance - Solving Power Reach Issues With Diverse DAS Solutions Paul Smith Technical Marketing Manager GE Critical Power Paul Smith (214) 385-9070 Paul.D.Smith@GE.com Terrell
MTP Loose Tube Trunk Assemblies. Features. Applications.
Loose Tube Trunk Assemblies Up to 144 fibre loose tube optical cable assemblies designed and manufactured for high density applications that require interface. They are available in singlemode (G.652.D,
Construction 2-24 tightly buffered fibres 900 m 50 m. colour code 1 Red 13 Yellow w/mark every 70 mm 2 Green 14 White w/mark every 70 mm 3 Blue 15 Gre
Universal indoor/outdoor distribution or mini breakout cable with ES9 tight buffer, 2 24 fibres and black FireBur sheath, VDE: U-V(ZN)H Application and Installation This distribution or mini-break-out
SPEC No.: ZP REVISION: 1.1 ZP ELECTRON CO.,INC. Designer. Division. Approver
TECHNICAL SPECIFICATION FOR Optical Fiber Overhead Ground Wire (OPGW) Designer Approver SPEC No.: ZP10-15389 REVISION: 1.1 Technical Supporter ZP Int ternational Division Chief Technical Engineer ZP Int
Construction 2-24 tightly buffered fibres 900 m 50 m. colour code 1 Red 13 Yellow w/mark every 70 mm 2 Green 14 White w/mark every 70 mm 3 Blue 15 Gre
Universal indoor/outdoor distribution or mini breakout cable with ES9 tight buffer, 2 24 fibres and black FireBur sheath, VDE: U-V(ZN)H Application and Installation This distribution or mini-break-out
Instructions for Wire Mesh Pulling Grips on Outside Plant and Indoor/Outdoor Fiber Optic Cable Best Practices
Instructions for Wire Mesh Pulling Grips on Outside Plant and Indoor/Outdoor Fiber Optic Cable Best Practices Panduit Corp. 2007 BEST PRACTICES Table of Contents 1.0 General Information... 3 2.0 Preparation
Splice Trays. features and benefits. specifications. A LANscape. Solutions Product. Splice Capacity
features and benefits Metal trays powder coated Clear plastic covers Fiber loop retention Positive holding action specifications SPECIFICATION SHEET LAN-331-EN PAGE 1 Ruggedness and durability Fiber visibility
FTTH simplex indoor cables with semi-tight tube
FTTH simplex indoor cables with semi-tight tube Design Cable design Strain relief Jacket material Jacket colour 1 semi-tight tube Aramide yarn LSFH white Properties Metal free indoor cable Strain relief
DNV-GL HH CE RoHS-II conform
Armour: Extremely bending- and torsion-stable aramid braid Armour: Extremely bending- and torsion-stable aramid wrapping Outer jacket: Pressure extruded PUR mixture Fibre: FOC-fibre made out of glass Subcable
Fiber Cables & Hardware
Fiber Cables & Hardware Quiktron has been the premier manufacturer of high performance fiber optic cables since 1994. Whether you are looking for standard or custom fiber cables, Quiktron can provide the
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816
Solid PE Insulated & LAP Sheathed Air Core/Jelly Filled Cables to DIN VDE 0816 APPLICATION The cables are designed for use as connection between central fices. The cables are suitable for installation
MARCH COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Kits
MARCH 2012 COYOTE 9.5 x 19 (292 mm x 509 mm) Terminal Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before
Industrial Optical Cables
Your Optical Fiber Solutions Partner HCS and GiHCS Industrial Optical Cables now including a full line of greener Low Smoke Zero Halogen options SUBWAY TRAIN TUNNEL FACTORY CONTROL SYSTEMS Indoor Industrial
COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure
AUGUST 2013 COYOTE 9.5" x 19" (292 mm x 509 mm) Cross-Connect Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED TM product
OPTOFLEX G62,5/125: rubber cables with fiber optic
OPTOFLEX G62,5/125: rubber cables with fiber Application Flexible fibre cable for signal and data transmission on cranes and material handling equipment; suitable for cable handling systems, such as reels,
Fiber Solutions for Access and Transport Networks
PRODUCT CATALOGUE Fiber Solutions for Access and Transport Networks Rev. 2017-A HEXATRONIC.COM 1 B D A C A Long Term Investment The passive infrastructure in any fiber optic network is a long-term investment.
S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC)
S Ingle Mode Fiber Patch Cord and Pigtail (SC/APC, LC/APC) 1. General : 1.1 This specification covers the requirements of the standard patch cord and pigtail to be supplied to TOT Public Company Limited
Proposed Short circuit test: The attenuation coefficient to max allowed increased 0.05 db/km from the point of strike.
Proposed Short circuit test: The attenuation coefficient to max allowed increased 0.05 db/km from the point of strike. Test 1 2 3 Short-circuit current 6kA 9kA 20kA Duration 1.0Sec 0.5Sec 0.1Sec 46 Proposed
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
Tight Buffer Distribution Plenum Cable Type OFNP, CSA FT6
Tight Buffer Distribution Plenum Cable Type OFNP, CSA FT6 2 144 fibers Epoxy/glass rod (P1D) or fluoropolymer Lightweight, flexible design simplifies installation Tight buffered fibers are easy to handle
Customer Owned Copper Outside Plant Guidelines
Customer Owned Copper Outside Plant Guidelines December 2017 Introduction CommScope offers several products to extend high performance copper connectivity to the outdoor environment where cabling may be
Opti-Guard Splice Enclosure
Opti-Guard Splice Enclosure The Opti-Guard Splice Enclosure from AFL offers an impressive spectrum of features which makes it the best selection for your splice protection needs. Its unique and flexible
Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
5 NOVEMBER 2010 COYOTE Dome 9.5 x 28 Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application. 1. 7. 2. 4. 10.
Section 6 FIBERLIGN Hardware for ADSS
FIBERLIGN Hardware for ADSS: Section 6 Section 6 FIBERLIGN Hardware for ADSS Table of Contents Page Fiber Optic Product Layout for ADSS...6-2 FIBERLIGN Lite Tension Dead-end for ADSS...6-3 FIBERLIGN Dielectric
Table of Contents. Optical Ground Wire Hardware. Tools. Assemblies. ADSS Mini-Span Hardware. ADSS Hardware. Installation Instructions
Table of Contents Optical Ground Wire Hardware Bolted Dead End..................................... 3 Dead End Link Plate.... 6 Comealong......................................... 7 HIBUS OPGW Suspension...
COYOTE Terminal Dome Closure 6.5" x 22"
FEBRUARY 2015 COYOTE Terminal Dome Closure 6.5" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
COYOTE LCC (Low Count Closure)
PLP Feature Focus 2009 Preformed Line Products OCTOBER 2012 Film available at www.preformed.com COYOTE LCC (Low Count Closure) Be sure to read and completely understand this procedure before applying product.
Annexure B (1)- Engineering Instructions for Installation of Aerial OFC
Annexure B (1)- Engineering Instructions for Installation of Aerial OFC INSTALLATION PRACTICE OF SELF SUPPORTING METAL FREE AERIAL OPTICAL FIBER CABLE 1. SCOPE: This Engineering Instruction (EI) deals
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION.
THE SB01 SPLICE ENCLOSURE NOW INCLUDES A LID GASKET THAT DOES NOT REQUIRE RTV APPLICATION. DO NOT APPLY RTV TO THE GASKET WHEN SEALING THE SB01 SPLICE ENCLOSURE. SEE SECTION 18 FOR UPDATED INSTRUCTIONS.
40G QSFP+ (MPO) to 4x10G SFP+ (8xLC) Assembly
Product updated on September 19, 2018 40G QSFP+ (MPO) to 4x10G SFP+ (8xLC) Assembly 40G parallel optics transceivers (40GBASE-SR4) can support 4x10G modes this feature allow new parallel optics active
Type of Fiber Optic Cables. Typical Experiences. Duct Cable. Buried Cable. Figure-8 Self-supporting Aerial Cable ADSS. Micro Fiber and Cable
ZTT is a leading and global manufacturer of cable systems, which provides package solutions for telecommunication and power applications around the world. With its rich heritage of highly advanced R&D
The reinforcing rods are incorporated in this assembly to ensure the optical fibres within the OPGW Range
OPGW Suspension Assemblies Optical Fibre Cable Same lay as OPGW outer stranding H Reinforcing rods opposite lay to OPGW outer stranding S L Application Heliformed suspension assemblies designed for use
Table of Contents. 1 General. 2 General Safety Precautions and Guidelines. 3 Clearances
Issue 5, September 2011 Blue Book - Manual of Construction Procedures 1 General 1.1 Reasons for SR1421 Reissue(s)........................... 1 1 1.1.1 Reasons for SR-1421, Issue 5..........................
Mini-OTE 400. Mini-OTE 400. Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide.
Mini-OTE 400 INSTALLATION INSTRUCTION TC-1335-IP Rev C, March 2017 www.commscope.com Mini-OTE 400 Content 1 General 1.1 General product information 1.2 Cable types 1.3 Symbols in this guide 2 Tools Required
COYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure
AUGUST 2012 COYOTE 9.5" x 19" (292 mm x 509 mm) Dome Closure Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
OFFSHORE WIND FEASIBILITY STUDY APPENDICES Appendix C.2 Subsea Cable Data Sheets
OFFSHORE WIND FEASIBILITY STUDY APPENDICES 10-7 10.3.2 Appendix C.2 Subsea Cable Data Sheets Design data for TFVA 36 kv 3x1x240 mm 2 KQ Metallic Laying up Inner sheath Bedding Armor Diameter of conductor
COYOTE Dome Cross-Connect Closure 6-1/2" x 22"
FEBRUARY 2015 COYOTE Dome Cross-Connect Closure 6-1/2" x 22" Be sure to read and completely understand this procedure before applying product. Be sure to select the proper PREFORMED product before application.
CS Fiber Optic Splice Case. Instruction
3 2179-CS Fiber Optic Splice Case Instruction 2179-CS Fiber Optic Splice Case Description 1.0 General 1.1 The 3M 2179-CS Fiber Optic Splice Cases are closures that can be used in buried, underground, aerial,
3000SC Fiber Optic Splice Closure
3000SC Fiber Optic Splice Closure Protect All Of Your Fiber Optic Splices From Harsh Outside Plant Environments Product Description Our 3000SC Fiber Optic Splice Closure is a sealed, reinforced thermoplastic
8400 Series Fiber Distribution System
8400 Series Fiber Distribution System Instructions January 1997 34-7041-4699-1-A 1 Contents: 1.0 General... 3 2.0 System Components... 4 3.0 System Engineering... 5 4.0 Hardware Installation... 7 5.0 Cable
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS. Part Number
SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS Made from high impact, UV resistant, polyvinyl chloride (PVC), they are non-corrosive and do not abrade the conductor or require
Fibre optic cables. Guarantee. Fibre optic cables. Information about Fibre optic cables CFLK CFLG88 CFLG.LB.PUR CFLG.LB CFLG.G
Page [m/s2] v max. [m/s] gliding v max. [m/s]. unsupported Torsion resistant Oil-resistant Approvals and standards Temperature. e-chain Minimum bend radius. e-chain Jacket chainflex cable Fibre optic cables
Fiber optic splice closure
FOSC-450A I N S T A L L A T I O N I N S T R U C T I O N TC-772-IP Rev A, Mar 2017 www.commscope.com Fiber optic splice closure Content 1 Introduction 2 General 2.1 Kit content 2.2 Tools 2.3 Accessories
STFOC Optical Cable. Non-Kink Crush Proof
STFOC Optical Cable Non-Kink Crush Proof Linden Photonics, Inc. Optical packaging S T F O C Linden s fiber optic cables are available for a variety of underwater uses from munitions tethers to ROV controls
Type of Fiber Optic Cables. Typical Experiences. Duct Cable. Buried Cable. Figure-8 Self-supporting Aerial Cable ADSS. Micro Fiber and Cable
ZTT is a leading and global manufacturer of cable systems, which provides package solutions for telecommunication and power applications around the world. With its rich heritage of highly advanced R&D
SJOF-BS604A Fiber Optic Splice Closure User Manual Rev.0
Fiber Optic Splice Closure VISSEM 1. Introduction 1.1 General VISSEM s SJOF-BS604A protects fiber optic splicing point in various installation conditions such as aerial, manholes, ducts, wall and direct
Chengdu Qianhong Communication Co., Ltd. Fiber Optic Splice Closure. GJS03-M8AX-JX-144D-Mechnical Sealing Way.
Fiber Optic Splice Closure GJS03-M8AX-JX-144D-Mechnical Sealing Way Specification GJS03-M8AX Catalogue General Introduction GJS03-M8AX-JX-144D dome Fiber Optic Splice Closure (FOSC) are mechanical sealing
Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies
Introduction to Fiber Cable Assemblies FiberDeep and Cable Assemblies Combining 40+ years of experience from its founding members, Clearfield designs and manufactures fiber optic cable assemblies for virtually
Instructions for Preparing AFL OPTICAL GROUND WIRE CABLE (HEXACORE CABLE DESIGNS)
Instructions for Preparing AFL OPTICAL GROUND WIRE CABLE IN THE OPTI-GUARD SPLICE ENCLOSURE (HEXACORE CABLE DESIGNS) NOTE: EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND/OR SPECIFICATIONS
LC Cable Assemblies. Fiber Optic Products Catalog. Product Facts. LC Cable Assembly. Hybrid LC-SC Cable Assembly
LC Cable Assemblies Product Facts For high performance applications/high density 125 µm Ceramic Ferrule Technology Small size 1/2 size of standard SC and FC products Singlemode and multimode Tuned singlemode
Product Descriptions
Product Descriptions Catalog Number Foil Standard Construction - 60% Braid (90% Braid also available) lbs/kft kg/km lbs/kft kg/km F1160BV tape, 60% braid, PVC 59 88 69 103 F1160BVV tape, 60% braid, PVC,
Preliminary Report on Oak Ridge National Laboratory Testing of Drake/ACSS/MA2/E3X
ORNL/TM-2015/549 Preliminary Report on Oak Ridge National Laboratory Testing of Drake/ACSS/MA2/E3X Approved for public release. Distribution is unlimited. Philip Irminger Dan King Drew Herron Cody Davis
Opticom Rack Mount Fiber Enclosures
Opticom Rack Mount Fiber Enclosures Part Numbers: FRME1U, FRME2U Panduit Corp. 2011 INSTALLATION INSTRUCTIONS FRME1U FRME2U Contents - (#) indicates FRME2U quantity 1 - ENCLOSURE 2 - MOUNTING BRACKETS
Polymer Insulators A Better Solution
Polymer Insulators A Better Solution October 2016 LET S CONNECT POLYMER INSULATORS Design derived from PLP s many years of worldwide experience and tested to adhere to ANSI C29.5 and ANSI 29.6 insulator
Mechanical Suspensions Single and Double
Mechanical Suspensions Single and Double Supporting spans of Optical Ground Wire cable through a wide range of line angle changes, the unique design of the lightweight AFL Mechanical Suspension installs
Tender No. : Ref. No. : LSGS-13-CX User / Customer : Page No. : 1 of 9. Specification. For
Tender No. : Ref. No. : LSGS-13-CX0022-05 User / Customer : Page No. : 1 of 9 Tender Title : Bidder : LS Cable & System Ltd. Document Title : Specification For RG Cable
LightLink Fiber Optic Splice Trays
LightLink Fiber Optic Splice Trays AFL s LightLink series of Fiber Optic Splice Trays offers a variety of unique and flexible splice and storage possibilities. They are available in industry standard config