CV 206/216/306/316 GG. Standard control valves 2- or 3-way, DN , cast iron

Transcription

1 CV 206/216/306/316 GG Standard control valves 2- or 3-way, DN , cast iron

2 IMI TA / Control valves / CV 206/216/306/316 GG CV 206/216/306/316 GG Suitable in building applications for heating and cooling systems. Available in dimensions up to DN 150, pressure class PN 6 and PN 16 with flanges. Key features > > Microprocessor controlled Multifunctional adjustable. > > Extensive actuator programme For different actuating thrust and actuating time easily interchangeable. > > Tight sealing Tight closed in both end-positions. Technical description Application: eating and cooling systems Function: CV206/216 GG: 2-way control valve CV306/316 GG: 3-way mixing or reversing valve Characteristics: CV206/216 GG: Equal percentage. CV306/316 GG: A AB equal percentage. B AB linear. Dimensions: CV206/306 GG: DN CV216/316 GG: DN Pressure class: CV206/306 GG: PN 6 CV216/316 GG: PN 16 Temperature: Max. working temperature: 150 C (The valves should be mounted in horizontal position at temperatures above 130 C) Min. working temperature: 0 C (Suitable for water with antifreeze compounds down to -10 C) (For lower and higher temperatures (up to 200 C) and working pressures PN please contact IMI ydronic Engineering.) Material: Body: Cast iron EN-JL1040 Plug: Brass CW614N (DN Cr-Ni steel) Stem: CrMO-steel Stem sealing: EPDM O-rings Marking: PN, DN and flow direction arrow. (in case of CV306/316 GG names of ports also - A, B, AB) Connection type: Flanges according to EN type 21 Face to face: According to EN basic series 1 Leakage rate: EN 1349, seat-leakage VI G 1 (tight sealing) Max. lift of the control valve: DN 15-50: 14 mm DN 65: 20 mm DN : 30 mm DN : 50 mm Range ability: DN 15: 50:1 DN : 100:1 Actuator: TA-MC55, TA-MC65, TA-MC100, TA-MC160, TA-MC161, TA-MC250, TA-MC400, TA-MC500, TA-MC1000, TA-MC100FSE, TA-MC100FSR. 2

3 Valve variants and accessories - Plug made of CrNi-steel With stem heater suitable for water with antifreeze compounds down to -10 C 24 VAC, 50/60 z Power consumption: DN : 30 W DN : Pmax. ~200 W / PN ~45 W - Epoxy resin special varnish as a corrosion resistant in case of condensed water, max. 80 C - Usable for media based on mineral oil basis (stem sealing made of FKM) - Technical silicon free version For variants and accessories please contact IMI ydronic Engineering. Installation Valve trim could be damaged by dirt in the pipe system. Installation of strainers are recommended. Note! A free space above the actuators is necessary. TA-MC55/65/100/160/161 TA-MC100FSE/FSR TA-MC250/400/500/1000 >140 >200 3

4 IMI TA / Control valves / CV 206/216/306/316 GG Technical data valve with actuator PN 6 DN Kvs 4 2,5 1,6 1,25 0,63 6,3 5 Stroke mm TA-MC55/ TA-MC55/230 70* TA-MC55Y Closing pressure kpa TA-MC65/ TA-MC65/ * TA-MC65Y Closing pressure kpa * 180* TA-MC100/ TA-MC100/ Closing pressure kpa TA-MC161/24 55* 80* TA-MC161/230 Closing pressure kpa TA-MC160/24 120* TA-MC160/230 Closing pressure kpa TA-MC250/24 75* TA-MC250/230 Closing pressure kpa TA-MC400/24 15* TA-MC400/230 Closing pressure kpa TA-MC500/24 75* TA-MC500/230 Closing pressure kpa , , ) Actuating time freely adjustable, presetting marked with * PN 6 DN Kvs 4 2,5 1,6 1,25 0,63 6,3 5 Stroke mm TA-MC100FSE Actuating time s TA-MC100FSR Fail-safe time s ~ 15 ~ VAC Closing pressure kpa TA-MC100FSE Actuating time s TA-MC100FSR Fail-safe time s ~ 15 ~ VAC Closing pressure kpa , ,

5 PN 16 DN Kvs 4 2,5 1,6 1,25 0,63 6, , , Stroke mm TA-MC55/ TA-MC55/230 70* TA-MC55Y Closing pressure kpa TA-MC65/ TA-MC65/ * TA-MC65Y Closing pressure kpa TA-MC100/24 TA-MC100/230 TA-MC161/24 TA-MC161/230 TA-MC160/24 TA-MC160/230 TA-MC250/24 TA-MC250/230 TA-MC400/24 TA-MC400/230 TA-MC500/24 TA-MC500/230 TA-MC1000/24 TA-MC1000/ * 180* Closing pressure kpa * 80* Closing pressure kpa * Closing pressure kpa * 125* Closing pressure kpa * 20* Closing pressure kpa * 125* Closing pressure kpa Actuating time s 50 Closing pressure kpa ) Actuating time freely adjustable, presetting marked with * PN 16 DN Kvs 4 2,5 1,6 1,25 0,63 6,3 5 Stroke mm TA-MC100FSE Actuating time s TA-MC100FSR Fail-safe time s ~ 15 ~ VAC Closing pressure kpa TA-MC100FSE Actuating time s TA-MC100FSR Fail-safe time s ~ 15 ~ VAC Closing pressure kpa , ,

6 IMI TA / Control valves / CV 206/216/306/316 GG Actuator TA-MC55/TA-MC65 Ø118 TA-MC55/24, TA-MC55/230, TA-MC55Y, TA-MC65/24, TA-MC65/230, TA-MC65Y 1 x M12x1,5 1 x M16x1,5 DN 24/230 V Kg ,5 TA-MC ,5 TA-MC ,5 TA-MC ,5 TA-MC ,5 TA-MC65 Technical description TA-MC55/ 24 TA-MC65/ 24 TA-MC55/ 230 TA-MC65/ 230 TA-MC55Y TA-MC65Y /mm 9 5* Actuating thrust kn 0,6 Stroke mm max. 20 Power supply VAC 24 ±10% % -10% 24 ±10% Power supply 2) VDC 24 ±10% - 24 ±10% Frequency z 50/60 ±5% Power consumption VA 3,5 7 3,5 Input signal 3) 0(2)...10 VDC, 77 kω 3-point 0(4)...20 ma, 0,51 kω Output signal 3) VDC max. 8 ma min Ω ysteresis V 0,3 Enclosure class: Automatic operation: IP 54 Manual operation: IP 30 Resolution: Electric: 0,04 VDC Mechanical: 0,06 mm Electrical connection: Actuator with screwed terminals. Ambient temperature: 0-60 C Operation mode: S3-50% ED c/h 1200 EN End position switch-off: Load-dependent Actuator variants: - Voltage: 115 VAC - Adapter with coupling for external products For variants and accessories please contact IMI ydronic Engineering. 1) Actuating time freely adjustable, presetting is marked with * 2) TA-MC65Y: Direct-current rectified alternating voltage 3) Invertable input and output signal Wiring diagram: U U U MC55 Y, MC65 Y UB N1 B1 B2 Y X 24 V MC55/24, MC65/24 UB N1 2 3 X 230V MC55/230, MC65/230 UB N1 2 3 N2 X T 0 T 0 GND 24 VAC / 24 VDC 24 VAC / 24 VDC 230 VAC 6

7 Actuator TA-MC100 Ø100 TA-MC100/24, TA-MC100/230 1 x M16x1,5 1 x M20x1,5 DN 24 V 230 V Kg , , , , ,5 Technical description TA-MC100/24 TA-MC100/230 /mm 12 9* 4 1,9 Actuating thrust kn 1,0 Stroke mm max. 20 Power supply VAC 24 ±10% % -10% Power supply VDC 24 ±10% - Frequency z 50/60 ±5% Power consumption VA 6 12 Input signal 3) 3-point 0(2)...10 VDC, 77 kω 0(4) ma, 0,51 kω Output signal 3) VDC max. 8 ma min Ω ysteresis 4) V 0,15 0,5 Ingress protection: IP 54 Resolution: Electric: 0,04 VDC Mechanical: 0,095 mm Ambient temperature: 0-60 C Operation mode: S3-50% ED c/h 1200 EN ) Actuating time freely adjustable, presetting is marked with * 3) Invertible input and output signal 4) Freely adjustable 5) Position switch unit and output signal 0(4)...20 ma not in combination Wiring diagram: B1/B2 Connection of a binary signal (e.g. frost safety) Standard design Special accessories End position switch-off: Load-dependent U Actuator variants: - Voltage: 115 VAC - Position switch unit 5) : 2 switches (WE1/WE2), potential free, infinitely adjustable. Rated load: 8 A / 250 VAC, 8 A / 30 VDC. Turn-on voltage: max. 400 VAC, max. 125 VDC - Enclosure protection: IP 65 - Output signal 5) : X=0(4)...20 ma - Adapter with coupling for external product For variants and accessories please contact IMI ydronic Engineering. 230 V AC 115 V AC 24 V AC 24 V DC UB N1 2 3 R B1 B2 N2 Y X GND T 20 WE WE

8 IMI TA / Control valves / CV 206/216/306/316 GG Actuator TA-MC160/TA-MC161 Ø100 TA-MC160/24, TA-MC160/230, TA-MC161/24, TA-MC161/230 1 x M16x1,5 1 x M20x1,5 DN 24 V 230 V ,2 TA-MC ,2 TA-MC ,2 TA-MC161 TA-MC ,2 TA-MC ,2 TA-MC160 Kg Technical description TA-MC160/24 TA-MC161/24 TA-MC160/230 TA-MC161/230 /mm 6 4* Actuating thrust kn 1,6 Stroke mm max. 30 max. 20 max. 30 max. 20 Power supply VAC 24 ±10% % -10% Power supply 2) VDC 24 ±10% - Frequency z 50/60 ±5% Power consumption VA 6 12 Input signal 3) 3-point 0(2)...10 VDC, 77 kω 0(4) ma, 0,51 kω Output signal 3) VDC max. 8 ma min Ω ysteresis 4) V 0,05 0,15 0,3 0,5 Ingress protection: IP 54 Resolution: Electric: 0,04 VDC Mechanical: 0,05 mm Ambient temperature: 0-60 C Operation mode: S3-30% ED c/h 1200: EN End position switch-off: Load-dependent 1) Actuating time freely adjustable, presetting is marked with * 2) TA-MC161: Direct-current rectified alternating voltage 3) Invertible input and output signal 4) Freely adjustable 5) Position switch unit and output signal 0(4)...20 ma not in combination Wiring diagram: B1/B2 Connection of a binary signal (e.g. frost safety) Standard design Special accessories Actuator variants: - Voltage: 115 VAC - Position switch unit 5) : 2 switches (WE1/WE2), potential free, infinitely adjustable. Rated load: 8 A / 250 VAC, 8 A / 30 VDC. Turn-on voltage: max. 400 VAC, max. 125 VDC - Enclosure protection: IP 65 - Output signal 5) : X=0(4)...20 ma - Adapter with coupling for external product For variants and accessories please contact IMI ydronic Engineering. 230 V AC 115 V AC 24 V AC 24 V DC U UB N1 2 3 R B1 B2 N2 Y X GND T 20 WE WE

9 Actuator TA-MC250 Ø135 TA-MC250/24, TA-MC250/230 2x M16x1,5 1x M20x1,5 DN 24/230 V 24 V Kg 230 V Kg ,0 8, ,0 8, ,0 8, ,0 8,2 Technical description TA-MC250/24 TA-MC250/230 /mm 5 2,5* Actuating thrust kn 2,5 Stroke mm max. 50 Power supply VAC 24 ±10% % -10% Power supply VDC 24 ±10% - Frequency z 50/60 ±5% Power consumption VA max. 18 max. 25 Input signal 3) 3-point 0(2)...10 VDC, 77 kω 0(4) ma, 0,51 kω Output signal 3) VDC max. 8 ma min Ω ysteresis 4) V 0,05 0,15 0,3 0,5 Ingress protection: IP 54 Resolution: Electric: 0,04 VDC Mechanical: 0,04 mm Ambient temperature: C Operation mode: S3-50% ED c/h 1200: EN ) Actuating time freely adjustable, presetting is marked with * 3) Invertible input and output signal 4) Freely adjustable Wiring diagram: B1/B2 Connection of a binary signal (e.g. frost safety) Standard design Special accessories End position switch-off: Load-dependent 230 V 24 V WE1 WE2 Actuator variants: - Voltage: 115 VAC - Position switch unit: 2 switches (WE1/WE2), potential free, infinitely adjustable. Rated load: 8 A / 250 VAC, 8 A / 30 VDC. Turn-on voltage: max. 400 VAC, max. 125 VDC - Enclosure protection: IP 65 - Output signal: X=0(4)...20 ma - Adapter with coupling for external product 230 V AC 24 V AC 24 V DC UB N1 T 2 3 R B1 B2 N2 GND Y X For variants and accessories please contact IMI ydronic Engineering. 9

10 IMI TA / Control valves / CV 206/216/306/316 GG Actuator TA-MC400 Ø135 TA-MC400/24, TA-MC400/230 2x M16x1,5 1x M20x1,5 DN 24/230 V Kg , , , ,5 Technical description TA-MC400/24 TA-MC400/230 /mm 0,6 0,4* Actuating thrust kn 4,0 Stroke mm max. 60 Power supply VAC 24 ±10% % -10% Frequency z 50/60 ±5% Power consumption VA max. 50 max. 63 Input signal 3) 3-point 0(2)...10 VDC, 77 kω 0(4) ma, 0,51 kω Output signal 3) VDC max. 8 ma min Ω ysteresis 4) V 0,05 0,15 0,3 0,5 Ingress protection: IP 54 Resolution: Electric: 0,04 VDC Mechanical: 0,12 mm Ambient temperature: C Operation mode: S3-30% ED c/h 1200: EN ) Actuating time freely adjustable, presetting is marked with * 3) Invertible input and output signal 4) Freely adjustable Wiring diagram: B1/B2 Connection of a binary signal (e.g. frost safety) Standard design Special accessories End position switch-off: Load-dependent 230 V 24 V WE1 WE2 Actuator variants: - Voltage: 115 VAC - Position switch unit: 2 switches (WE1/WE2), potential free, infinitely adjustable. Rated load: 8 A / 250 VAC, 8 A / 30 VDC. Turn-on voltage: max. 400 VAC, max. 125 VDC - Enclosure protection: IP 65 - Output signal: X=0(4)...20 ma - Adapter with coupling for external product 230 V AC 24 V AC UB N1 T 2 3 R B1 B2 N2 GND Y X For variants and accessories please contact IMI ydronic Engineering. 10

11 Actuator TA-MC500 Ø135 TA-MC500/24, TA-MC500/230 2x M16x1,5 1x M20x1,5 DN 24/230 V 24 V Kg 230 V Kg ,0 8, ,0 8, ,0 8, ,0 8,2 Technical description TA-MC500/24 TA-MC500/230 /mm 5 2,5* Actuating thrust kn 5 Stroke mm max. 50 Power supply VAC 24 ±10% % -10% Power supply VDC 24 ±10% - Frequency z 50/60 ±5% Power consumption VA max. 18 max. 25 Input signal 3) 3-point 0(2)...10 VDC, 77 kω 0(4) ma, 0,51 kω Output signal 3) VDC max. 8 ma min Ω ysteresis 4) V 0,05 0,15 0,3 0,5 Ingress protection: IP 54 Resolution: Electric: 0,04 VDC Mechanical: 0,04 mm Ambient temperature: C Operation mode: S3-50% ED c/h 1200: EN ) Actuating time freely adjustable, presetting is marked with * 3) Invertible input and output signal 4) Freely adjustable Wiring diagram: B1/B2 Connection of a binary signal (e.g. frost safety) Standard design Special accessories End position switch-off: Load-dependent 230 V 24 V WE1 WE2 Actuator variants: - Voltage: 115 VAC - Position switch unit: 2 switches (WE1/WE2), potential free, infinitely adjustable. Rated load: 8 A / 250 VAC, 8 A / 30 VDC. Turn-on voltage: max. 400 VAC, max. 125 VDC - Enclosure protection: IP 65 - Output signal: X=0(4)...20 ma - Adapter with coupling for external product 230 V AC 24 V AC 24 V DC UB N1 T 2 3 R B1 B2 N2 GND Y X For variants and accessories please contact IMI ydronic Engineering. 11

12 IMI TA / Control valves / CV 206/216/306/316 GG Actuator TA-MC1000 Ø135 TA-MC1000/24, TA-MC1000/230 2x M16x1,5 1x M20x1,5 DN 24/230 V Kg Technical description TA-MC1000/24 6) TA-MC1000/230 6) Actuating time s/mm 1 Actuating thrust kn 10 Stroke mm max. 50 Power supply VAC 24 ±10% % -10% Frequency z 50/60 ±5% Power consumption VA max. 50 max. 63 Input signal 3) 3-point 0(2)...10 VDC, 77 kω 0(4) ma, 0,51 kω Output signal 3) VDC max. 8 ma min Ω ysteresis 4) V 0,05 0,15 0,3 0,5 Ingress protection: IP 54 Resolution: Electric: 0,04 VDC Mechanical: 0,05 mm Ambient temperature: C Operation mode: S3-30% ED c/h 1200: EN ) Invertible input and output signal 4) Freely adjustable 6) Only for CV216/316 GG Wiring diagram: B1/B2 Connection of a binary signal (e.g. frost safety) Standard design Special accessories End position switch-off: Load-dependent 230 V 24 V WE1 WE2 Actuator variants: - Voltage: 115 VAC - Position switch unit: 2 switches (WE1/WE2), potential free, infinitely adjustable. Rated load: 8 A / 250 VAC, 8 A / 30 VDC. Turn-on voltage: max. 400 VAC, max. 125 VDC - Enclosure protection: IP 65 - Output signal: X=0(4)...20 ma - Adapter with coupling for external product 230 V AC 24 V AC UB N1 T 2 3 R B1 B2 N2 GND Y X For variants and accessories please contact IMI ydronic Engineering. 12

13 Actuator TA-MC100FSE/FSR 144 TA-MC100FSE/24, TA-MC100FSE/230, TA-MC100FSR/24, TA-MC100FSR/230 DN 24/230 V Kg , , , , ,8 Technical description TA-MC100FSE/24 TA-MC100FSR/24 TA-MC100FSE/230 TA-MC100FSR/230 Actuating time s/mm 2 9 Fail-safe time s/mm ~1 Actuating thrust kn 1,0 Stroke mm max. 20 Power supply VAC 24 ±15% 230 ±15% Frequency z 50/60 ±5% Power consumption VA Input signal 3-point 0(2)...10 VDC 0(4) ma 3-point Output signal 0(2)...10 VDC max. 5 ma 0(4)...20 ma max. 5 ma VDC max. 5 ma Ingress protection: IP 54 Wiring diagram TA-MC100FSE/24 and TA-MC100FSR/24: Fail-safe function: TA-MC100FSE: Stem extended on power failure TA-MC100FSR: Stem retracted on power failure Ambient temperature: 0-50 C UB N1 N2 Y X Operation mode: S3-50% ED c/h 1200: EN End position switch-off: Load-dependent 24V AC Wiring diagram TA-MC100FSE/230 and TA-MC100FSR/230: For variants and accessories please contact IMI ydronic Engineering. N2 X 2 3 N1 UB O GND 230VAC N PE 13

14 IMI TA / Control valves / CV 206/216/306/316 GG CV206 GG PN 6 L 1) Stroke 20 mm 2) Stroke 30 mm B ØDØD1 DN D D1 L B No of bolts Kvs Kg Article No x Ø11 0,63 2, x Ø11 1,25 2, x Ø11 1,6 2, x Ø11 2,5 2, x Ø11 4 2, x Ø11 5 3, x Ø11 6,3 3, x Ø11 8 4, x Ø , x Ø14 12,5 7, x Ø , x Ø , x Ø , x Ø14 31,5 10, x Ø , ) x Ø , ) x Ø , ) x Ø , ) x Ø , x Ø , x Ø , x Ø , x Ø , CV306 GG PN 6 L 1) Stroke 20 mm 2) Stroke 30 mm B ØDØD1 DN D D1 L B No of bolts Kvs Kg Article No x Ø11 0,63 2, x Ø11 1,25 2, x Ø11 1,6 2, x Ø11 2,5 2, x Ø11 4 2, x Ø11 5 3, x Ø11 6,3 3, x Ø11 8 3, x Ø , x Ø14 12,5 5, x Ø , x Ø , x Ø , x Ø14 31,5 8, x Ø , ) x Ø ) x Ø ) x Ø ) x Ø x Ø x Ø x Ø x Ø

15 CV216 GG PN 16 L 1) Stroke 20 mm 2) Stroke 30 mm B ØDØD1 DN D D1 L B No of bolts Kvs Kg Article No x Ø14 0,63 4, x Ø14 1,25 4, x Ø14 1,6 4, x Ø14 2,5 4, x Ø14 4 4, x Ø14 5 5, x Ø14 6,3 5, x Ø14 8 6, x Ø , x Ø18 12,5 10, x Ø , x Ø , x Ø , x Ø18 31,5 15, x Ø , ) x Ø , ) x Ø , ) x Ø , ) x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , CV316 GG PN 16 L 1) Stroke 20 mm 2) Stroke 30 mm B ØDØD1 DN D D1 L B No of bolts Kvs Kg Article No x Ø14 0,63 3, x Ø14 1,25 3, x Ø14 1,6 3, x Ø14 2,5 3, x Ø14 4 3, x Ø14 5 4, x Ø14 6,3 4, x Ø14 8 5, x Ø , x Ø18 12,5 7, x Ø , x Ø , x Ø , x Ø18 31,5 11, x Ø , ) x Ø , ) x Ø , ) x Ø , ) x Ø , x Ø , x Ø , x Ø , x Ø , x Ø , x Ø ,

16 IMI TA / Control valves / CV 206/216/306/316 GG Actuators For CV206/306 GG Type Power supply Actuating thurst [kn] Input signal For valve Stroke [mm] Article No TA-MC55/24 24 VAC/DC 0,6 3-point DN TA-MC55/24 24 VAC/DC * 0,6 3-point DN TA-MC55/ VAC 0,6 3-point DN TA-MC55Y 24 VAC/DC 0,6 0(2)-10 V, 4(0)-20 ma DN TA-MC55Y 24 VAC/DC * 0,6 0(2)-10 V, 4(0)-20 ma DN TA-MC65/24 24 VAC/DC 0,6 3-point DN TA-MC65/24 24 VAC/DC * 0,6 3-point DN TA-MC65/ VAC 0,6 3-point DN TA-MC65Y 24 VAC/DC 0,6 0(2)-10 V, 4(0)-20 ma DN TA-MC100/24 24 VAC/DC 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC100/24 24 VAC/DC * 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC100/ VAC 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC160/24 24 VAC/DC 1,6 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC160/24 24 VAC/DC * 1,1 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC160/ VAC 1,6 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC161/24 24 VAC/DC 1,6 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC161/ VAC 1,6 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC250/24 24 VAC/DC 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC250/24 24 VAC/DC * 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC250/ VAC 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC400/24 24 VAC 4,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC400/ VAC 4,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/24 24 VAC/DC 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/24 24 VAC/DC * 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/ VAC 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC100FSE/24 24 VAC 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC100FSE/ VAC 1,0 3-point DN , TA-MC100FSR/24 24 VAC 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC100FSR/ VAC 1,0 3-point DN , Note: DC Direct-current rectified alternating voltage. *) DC Direct current flat voltage.

17 For CV216/316 GG Type Power supply Actuating thurst [kn] Input signal For valve Stroke [mm] Article No TA-MC55/24 24 VAC/DC 0,6 3-point DN TA-MC55/24 24 VAC/DC * 0,6 3-point DN TA-MC55/ VAC 0,6 3-point DN TA-MC55Y 24 VAC/DC 0,6 0(2)-10 V, 4(0)-20 ma DN TA-MC55Y 24 VAC/DC * 0,6 0(2)-10 V, 4(0)-20 ma DN TA-MC65/24 24 VAC/DC 0,6 3-point DN TA-MC65/24 24 VAC/DC * 0,6 3-point DN TA-MC65/ VAC 0,6 3-point DN TA-MC65Y 24 VAC/DC 0,6 0(2)-10 V, 4(0)-20 ma DN TA-MC100/24 24 VAC/DC 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC100/24 24 VAC/DC * 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC100/ VAC 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC160/24 24 VAC/DC 1,6 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC160/24 24 VAC/DC 1,1 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC160/ VAC 1,6 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC161/24 24 VAC/DC 1,6 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC161/ VAC 1,6 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC250/24 24 VAC/DC 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC250/24 24 VAC/DC * 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC250/ VAC 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC250/24 24 VAC/DC 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC250/24 24 VAC/DC * 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC250/ VAC 2,5 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC400/24 24 VAC 4,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC400/ VAC 4,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/24 24 VAC/DC 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/24 24 VAC/DC * 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/ VAC 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/24 24 VAC/DC 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/24 24 VAC/DC * 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC500/ VAC 5,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC1000/24 24 VAC 10,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC1000/ VAC 10,0 3-point, 0(2)-10 V, 4(0)-20 ma DN TA-MC100FSE/24 24 VAC 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC100FSE/ VAC 1,0 3-point DN , TA-MC100FSR/24 24 VAC 1,0 3-point, 0(2)-10 V, 4(0)-20 ma DN , TA-MC100FSR/ VAC 1,0 3-point DN , Note: DC Direct-current rectified alternating voltage. *) DC Direct current flat voltage. The products, texts, photographs, graphics and diagrams in this document may be subject to alteration by IMI ydronic Engineering without prior notice or reasons being given. For the most up to date information about our products and specifications, please visit CV 206/216/306/316 GG v

18 IMI TA / /