EXPERIENCE INNOVATION QUALITY

Transcription

1 March Macalloy s Macalloy Macalloy Standard Macalloy Fixed nd Z-14.4-

2 2 Macalloy s Sce the 1940 s Macalloy has been leadg the way the design, manufacture and supply of threaded bar systems, consistently servg its various markets with experience, novation and quality. Macalloy Macalloy s compression strut range builds on the tension structure products range and provides an adaptable, architectural solution across all budget and design parameters. The compression strut product range corporates two adjustable and one fixed solution, all of which are designed to be used conjunction with the Macalloy tension structure range of tension bars, staless cables and connection solutions. The Macalloy provides an aesthically pleasg long taper end to each end of the compression strut. The system uses the same fork end system as the Macalloy tension bar and cable systems allowg for combations of all 3 systems. The comes complete with an adjustable lock collar that provides a seamless lk between the fork end and strut. Available both staless and carbon steel. Advantages Pleasg architectural design Adjustment of the total length is permitted Lock collar provides a seamless fish Compatible with Macalloy tension bar and cable systems Macalloy Standard The Macalloy Standard has a shorter taper end than the strut and does not use the lockg collar. This provides a more cost effective solution. The Standard still uses the same fork end system as Macalloy tension bars and cables allowg for combations of all 3 systems. The total length is adjustable. Available carbon steel. Advantages Cost effective solution with fork end system. Adjustment of the total length is permitted Compatible with Macalloy tension bar and cable systems Macalloy Fixed nd The Macalloy Fixed nd provides an aesthetic, cost effective alternative to the dustry standard steel T section welded to the end of a CHS. The fork end matas the same critical dimensions as the Macalloy tension structures range enablg the use of sgle connection plates for multiple Macalloy systems. Macalloy will supply only the end forks from stock, which can then be welded to a locally sourced CHS on, or near site. Available carbon steel as standard. Advantages Cost effective solution Aesthetically pleasg design compared to standard CHS solutions asy to stall Available from stock

3 3 Macalloy and Standard Table 1: CHS Outer Diameter and Wall Thickness System Ref M M M M M M36 M42 M48 M6 M M M8 M90 M0 Carbon CHS OD () Carbon CHS Wall Thickness () Staless CHS OD Contact Macalloy for details Staless CHS Wall thickness Contact Macalloy for details Alternative wall thicknesses are available. Contact Macalloy for details Table 2: Capacity and Lengths of and Standard s. System Ref M M M M M M36 M42 M48 M6 M M M8 M90 M0 and Standard Maximum compressive capacity to N1993 Maximum p to p length on N1993 standard kn kips ch Maximum lengths are based on the strut takg the maximum compressive capacity. For lower compressive loads longer lengths can be used. Table 3: Capacity of Fixed nd Fork nds System Ref M M M M M M36 M42 M48 M6 M M M8 M90 M0 Fixed nd Maximum compressive capacity to N1993 kn kips Wood Street, London, UK Architect - Richard Rogers Partnership Contractor Kajima Lag Management Jot Venture ngeer - Arups Simons Center for Geometry and Physics, Stony Brook University, USA Architect Perks astman ngeer Weidlger Associates

4 4 Table 4 : Component Dimensions - Macalloy Systems Thread Unit M M M M M M36 M42 M48 M6 M M M8 M90 M0 Fork Ref. FA FA FA FA FA FA36 FA42 FA48 FA6 FA FA FA8 FA90 FA0 L and Standard G (m) C Dia. D Dia Y H A G (m.) Fixed nd C Dia. D Dia Y H Gusset Plate Ref A GPA GPA GPA GPA GPA GPA36 GPA42 GPA48 GPA6 GPA GPA GPA8 GPA90 GPA0 Gusset Plate Ref A* T (Thickness) D PROFIL TO SUIT APPLICATION H (m) Gusset Plate Ref B* GPA GPA GPA GPA GPA GPA36 Gusset Plate Ref B** T (Thickness) D contact Macalloy for details PROFIL TO SUIT APPLICATION H (m.) P Ref PA PA PA PA PA PA36 PA42 PA48 PA6 PA PA PA8 PA90 PA0 P Ref P Dia L P * Grade S3 plate to N 088, or equivalent strength. Mimum yield 3 N/ 2 **Grade S3 plate to N088, or equivalent strength, for use with isolation sleeves and washers. Mimum yield 3 N/ 2

5 Macalloy s Approval The Macalloy System is approved Germany, by the Deutches Institut fûr Bautechnik, under approval number Z For further formation please contact the Macalloy technical department. Corrosion Protection Macalloy s can be supplied carbon steel with a primed coatg, ready for patg with a suitable pat system and staless steel. Tolerances and Adjustments Fixed nd The cuttg tolerances for a CHS s is +/- 3 Adjustable Adjustable compression struts offer the followg amount of adjustment each fork: M to M6 +/- ½ thread diameter M to M0 +/- 2 ITTL xhibition Centre, Cyprus Architect: Maratheftis Yiannouris Architects ngeer: Redesco slr Contractor: Loizos Iordanous Constructions Ltd St Paul s Square, Liverpool, UK Architect - RHWL Architects Contractor - Sheperd Construction ngeer - Buro Happold PSVDAS + SKARINOU Counal Centres, Cyprus Architects/ngeers - D. Mlchael & Associates Architects- ngeers Ma Contractor - Kyriakos Andreou Arsiotis Developments & Constructions Ltd

6 Gardens By the Bay, Sgapore Architect: Wilkson yre Structural ngeer: Atelier One University of Mnesota, USA Architects: HGA, KPF The formation the brochure is correct at the time of publication. Macalloy reserves the right to amend technical details of all products le with its policy of contuous development. For the latest version of this brochure refer to the Macalloy website. Macalloy, Caxton Way, Dngton, Sheffield S2 3Q, U.K. Tel: + (0) Fax: + (0) Website: mail: sales@macalloy.com is a Registered Trade Mark of McCalls Special Products Ltd.