ENTRANCEWAYS. CUSTOM SIZING in 1 8" (3) increments SECTION REFERENCE ENTRANCEWAYS. Residential Springline Entry Doors

Transcription

1 ENTRANCEWAYS ENTRANCEWAYS Entranceways SECTION REFERENCE Residential Springline Entry s Dimensions & Specifi cations Details Residential Arch & Rectangular Entry s & Sidelight Dimensions & Specifi cations & Sidelight Details Joining Details Entry Transoms Transom Dimensions & Specifi cations Transom Details & Joining Details CUSTOM SIZING in 1 8" (3) increments Commercial Outswing Entry s & Sidelight Dimensions & Specifi cations & Sidelight Details Product Performance Warranty Dimensions in parentheses are in millimeters.

2 RESIDENTIAL ENTRY DOORS FEATURES Frame Heavy-duty extruded aluminum cladding protects the frame exterior, providing low-maintenance durability. Standard cladding finish meets AAMA An optional finish that meets the AAMA 2605 standard is also available. Installation flange extends 1 1 2" (38) around three sides of the unit to help properly position the unit in the opening. Installation clips are standard for increased structural anchoring to building members. Mounted around the frame perimeter, the clips rotate into position and can be bent into place against the framing members to suit all jamb conditions. Wood frame members are treated with a water-repellent wood preservative for longlasting * protection and performance. Radii are made of laminated continuous veneers. Lineal components are engineered wood with a pine core. Extruded aluminum sill is thermally broken and available in painted bronze or gray finish. Innovative sill design provides superior water management. Standard outswing sills have an oak cap. Maple or mahogany ** are optional. Inswing sills have an interior wood trim strip to match the interior finish. One-piece compression weatherstripping at the frame sides and head protects against air and water infiltration. Flexible thermoplastic sweep is featured at the bottom of the panel on inswing units. Outswing doors also feature a polypropylene rain skirt at the panel sides and top for added protection. Panel Heavy-duty extruded aluminum cladding protects the panel exterior, providing lowmaintenance durability. Panels also available without cladding. Panel interior surfaces are unfinished wood veneers. Available species are pine, maple, oak, alder, cherry, mahogany ** and vertical grain douglas fir. Inswing D G F H Silicone glazing bead combined with two-sided silicone tape provides superior weathertightness. E High-Performance glass options include: Low-E4 tempered glass, Low-E4 HeatLock tempered glass, Low-E4 Sun tempered glass, Low-E4 SmartSun tempered glass, Low-E4 SmartSun HeatLock tempered glass. Additional glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Hardware Multi-Point Locking System/Expanded Offering Residential entry doors have a multi-point locking option with a hook bolt above and below the center deadbolt. This system provides a weathertight seal and enhanced security. Mix-and-match style and finish options are available to get just the right look inside and out. For style and finish options, see pages C B A Outswing Hinges Ball-bearing hinges are standard on outswing entry doors and are available in stainless steel, dark bronze and white finishes to complement hardware trim sets. Adjustable hinges are standard on inswing entry doors and have ball-bearing pivots for smooth, frictionless movement. Features easy horizontal and vertical adjustment, plus quick-release feature for easy panel removal. This feature is ideal for transporting large units up stairs or to other hard-to-reach areas. Gold dust finish is standard on wood interior doors. For units with a prefinished White interior, white finish hinges are standard. Also available in finishes that coordinate with hardware. Aftermarket Hardware For hardware purchased separately, doors can be ordered predrilled for easy on-site installation. They can also be specified without hardware drilling. Operation Inswing and outswing units are available. Choose left-hinged, right-hinged or stationary as viewed from the exterior. Sill A low-profile commercial sill is also available. See page 207 for more details. Panel Designs For additional panel design ideas, visit andersenwindows.com/entrydoors. ACCESSORIES Sold Separately Frame Extension Jambs Inswing and outswing standard jamb depth is " (116). Inswing is also available in a " (167) jamb depth. Interior extension jambs are available in 1 16" (1.5) increments between " (116) and 7 1 8" (181). Additional dimensions are available. Contact your Andersen supplier for more information. Interior extension jambs on inswing units will restrict the full opening of the door. Casings Curved interior casings are available in the same profiles as other Andersen products. Curved exterior aluminum and wood casings are available in matching radii and a variety of profiles. Hardware Handle Extension Handle extensions extend interior door handles an additional 1" (25) from the door panel to accommodate interior blinds or shades. A second extender may be added to the spindle to increase the length an additional 1" (25) to a 2" (51) total extension. Extenders and spindles are sold separately. Extenders are available in finishes that coordinate with hardware. Exterior Keyed Lock A six-pin key cylinder lock is available in styles and finishes that coordinate with hardware. This lock allows the door to be locked and unlocked from the exterior. Hardware Options See pages for hardware styles and finish options, including new FSB hardware. Grilles Grilles are available in a variety of configurations and widths. EXTERIOR EXTERIOR / INTERIOR INTERIOR WOOD SPECIES (Additional species available) 603 Art Decorative insulated art glass designs are available. PAINTED OPTIONS White Canvas Sandtone Terratone Forest Green Dark Bronze Pine Maple Oak Alder White Birch Bark Primed (for paint) Dove Gray Prairie Grass Red Rock Cocoa Bean Black * Visit andersenwindows.com/warranty for details. ** Actual wood is Sapele, a non-endangered species of mahogany, grown in Africa, with color and characteristics similar to American mahoganies. Hardware sold separately. FSB is a registered trademark of Franz Schneider Brakel GmbH & Co. Cherry Mahogany ** Vertical Grain Douglas Fir Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfi nished unless a painted option is specifi ed. Dark Bronze Black Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and fi nishes. See your Andersen supplier for actual color and fi nish samples. 192

3 ENTRANCEWAYS Custom-size doors are available in 1 8" (3) increments. Available in custom designed panels, see page 192. Stationary AESHIDxx68 AESHIDxx80 AESHIDxx80AP/PA doors are also available (i.e. AESHID3080S or AESHID4080SS). Springline Inswing Entry Dimensions and Specifications Dimensions Min. Rough Opening Clear Clear Opening Maximums of Panels Open* Radius Shoulder Opening 90 Full Vent Overall AESHID / 8" (479) 63 1 / 8" (1603) / 16" (957) 82" (2083) 38 3/ 16" (970) 82 1 / 2" (2096) (1.39) / 16" (833) 34 7 / 8" (886) 61 5 / 8" (1565) (1.70) (1.90) AESHID / 8" (556) 60 1 / 8" (1527) / 16" (1110) 82" (2083) 44 3/ 16" (1122) 82 1 / 2" (2096) (1.55) / 16" (986) 40 7 / 8" (1038) 58 5 / 8" (1489) (1.97) (2.18) AESHID /8" (479) 76 1 /8" (1934) /16" (957) 95" (2413) 38 3/16" (970) 95 1 /2" (2426) (1.68) /16" (833) 34 7 /8" (886) 74 5 /8" (1895) (1.99) (2.21) AESHID /8" (556) 73 1 /8" (1857) /16" (1110) 95" (2413) 44 3/16" (1122) 95 1 /2" (2426) (1.89) /16" (986) 40 7 /8" (1038) 71 5 /8" (1819) (2.31) (2.55) AESHID / 8" (645) 69 5 / 8" (1768) 50 3 / 4" (1289) 95" (2413) 51 1/ 4" (1302) 95 1 / 2" (2426) (2.11) / 16" (1113) / 16" (1218) 68 1 / 8" (1730) (2.69) (2.93) AESHID /8" (645) 69 5 /8" (1768) 50 3 /4" (1289) 95" (2413) 51 1/4" (1302) 95 1 /2" (2426) (1.01) 20 7 /8" (530) /16" (583) 68 1 /8" (1730) (1.28) (2.93) AESHID /8" (797) 63 5 /8" (1616) 62 3 /4" (1594) 95" (2413) 63 1/4" (1607) 95 1 /2" (2426) (2.40) /16" (1418) /16" (1522) 62 1 /8" (1578) (3.31) (3.57) AESHID /8" (797) 63 5 /8" (1616) 62 3 /4" (1594) 95" (2413) 63 1/4" (1607) 95 1 /2" (2426) (1.16) 26 7 /8" (683) /16" (735) 62 1 /8" (1578) (1.59) (3.57) AESHID / 8" (848) 61 5 / 8" (1565) 66 3 / 4" (1695) 95" (2413) 67 1/ 4" (1708) 95 1 / 2" (2426) (2.48) / 16" (1519) / 16" (1624) 60 1 / 8" (1527) (3.52) (3.78) AESHID /8" (848) 61 5 /8" (1565) 66 3 /4" (1695) 95" (2413) 67 1/4" (1708) 95 1 /2" (2426) (1.20) 28 7 /8" (733) /16" (786) 60 1 /8" (1527) (1.69) (3.78) AESHID /8" (949) 57 5 /8" (1464) 74 3 /4" (1899) 95" (2413) 75 1/4" (1911) 95 1 /2" (2426) (2.60) /16" (1722) /16" (1827) 56 1 /8" (1426) (3.92) (4.19) AESHID /8" (949) 57 5 /8" (1464) 74 3 /4" (1899) 95" (2413) 75 1/4" (1911) 95 1 /2" (2426) (1.27) 32 7 /8" (835) /16" (887) 56 1 /8" (1426) (1.89) (4.19) AESHID / 8" (1102) 51 5 / 8" (1311) 86 3 / 4" (2203) 95" (2413) 87 1/ 4" (2216) 95 1 / 2" (2426) (2.71) / 16" (2027) / 16" (2132) 50 1 / 8" (1273) (4.50) (4.80) AESHID /8" (1102) 51 5 /8" (1311) 86 3 /4" (2203) 95" (2413) 87 1/4" (2216) 95 1 /2" (2426) (1.32) 38 7 /8" (987) /16" (1040) 50 1 /8" (1273) (2.19) (4.80) Entranceways " Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed. Custom-size doors are available in 1 8" (3) increments. AESODxx68 AESODxx80 AESODxx80AP/PA Available in custom designed panels, see page 192. Stationary doors are also available (i.e. AESOD3080S or AESOD4080SS). Springline Outswing Entry Dimensions and Specifications of Panels Open* Radius Dimensions Min. Rough Opening Clear Shoulder Opening 90 Clear Opening Maximums Full Vent Overall AESOD / 8" (479) 63 1 / 8" (1603) / 16" (957) 82" (2083) 38 3/ 16" (970) 82 1 / 2" (2096) (1.39) 33 1 / 8" (841) 35 1 / 16" (891) 61 5 / 8" (1565) (1.70) (1.90) AESOD / 8" (556) 60 1 / 8" (1527) / 16" (1110) 82" (2083) 44 3/ 16" (1122) 82 1 / 2" (2096) (1.55) 39 1 / 8" (994) 41 1 / 16" (1043) 58 5 / 8" (1489) (1.98) (2.18) AESOD / 8" (479) 76 1 / 8" (1934) / 16" (957) 95" (2413) 38 3/ 16" (970) 95 1 / 2" (2426) (1.69) 33 1 / 8" (841) 35 1 / 16" (891) 74 5 / 8" (1895) (2.00) (2.21) AESOD /8" (556) 73 1 /8" (1857) /16" (1110) 95" (2413) 44 3/16" (1122) 95 1 /2" (2426) (1.90) 39 1 /8" (994) 41 1 /16" (1043) 71 5 /8" (1819) (2.32) (2.55) AESOD / 8" (645) 69 5 / 8" (1768) 50 3 / 4" (1289) 95" (2413) 51 1/ 4" (1302) 95 1 / 2" (2426) (2.12) 44 3 / 16" (1122) 48 1 / 8" (1222) 68 1 / 8" (1730) (2.70) (2.93) AESOD / 8" (645) 69 5 / 8" (1768) 50 3 / 4" (1289) 95" (2413) 51 1/ 4" (1302) 95 1 / 2" (2426) (1.01) 21" (533) 23" (584) 68 1 / 8" (1730) (1.28) (2.93) AESOD /8" (797) 63 5 /8" (1616) 62 3 /4" (1594) 95" (2413) 63 1/4" (1607) 95 1 /2" (2426) (2.41) 56 3 /16" (1427) 60 1 /8" (1527) 62 1 /8" (1578) (3.32) (3.57) AESOD / 8" (797) 63 5 / 8" (1616) 62 3 / 4" (1594) 95" (2413) 63 1/ 4" (1607) 95 1 / 2" (2426) (1.16) 27" (686) 29" (737) 62 1 / 8" (1578) (1.59) (3.57) AESOD /8" (848) 61 5 /8" (1565) 66 3 /4" (1695) 95" (2413) 67 1/4" (1708) 95 1 /2" (2426) (2.49) 60 3 /16" (1529) 64 1 /8" (1629) 60 1 /8" (1527) (3.52) (3.78) AESOD /8" (848) 61 5 /8" (1565) 66 3 /4" (1695) 95" (2413) 67 1/4" (1708) 95 1 /2" (2426) (1.20) 29" (737) 31" (787) 60 1 /8" (1527) (1.69) (3.78) AESOD / 8" (949) 57 5 / 8" (1464) 74 3 / 4" (1899) 95" (2413) 75 1/ 4" (1911) 95 1 / 2" (2426) (2.61) 68 3 / 16" (1732) 72 1 / 8" (1832) 56 1 / 8" (1426) (3.92) (4.19) AESOD /8" (949) 57 5 /8" (1464) 74 3 /4" (1899) 95" (2413) 75 1/4" (1911) 95 1 /2" (2426) (1.27) 33" (838) 35" (889) 56 1 /8" (1426) (1.89) (4.19) AESOD / 8" (1102) 51 5 / 8" (1311) 86 3 / 4" (2203) 95" (2413) 87 1/ 4" (2216) 95 1 / 2" (2426) (2.72) 80 3 / 16" (2037) 84 1 / 8" (2137) 50 1 / 8" (1273) (4.51) (4.80) AESOD / 8" (1102) 51 5 / 8" (1311) 86 3 / 4" (2203) 95" (2413) 87 1/ 4" (2216) 95 1 / 2" (2426) (1.33) 39" (991) 41" (1041) 50 1 / 8" (1273) (2.19) (4.80) " Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed. 193

4 RESIDENTIAL ENTRY DOORS Springline Inswing Entry Details " (116) Jamb Depth " Unobstr " (164) (164) Unit Dimension Rough Opening " Unobstr " (311) Unobstr " (164) Unit Dimension (164) Rough Opening Rough Opening Unit Dimension " (164) Unobstr " (297) Dimension from top of sill to subfloor will vary based on thickness of sill flashing " (38) Two-Panel Springline Inswing Entry Details " (167) Jamb Depth " " (167) " Unobstr " (164) (164) Unit Dimension Rough Opening " " (167) " (164) " " (167) " Unobstr " (311) Unobstr " (164) Unit Dimension (164) Rough Opening Rough Opening Unit Dimension Unobstr " (297) Dimension from top of sill to subfloor will vary based on thickness of sill flashing " (38) Two-Panel 4 9 / 16" (116) and 6 9 / 16" (167) jamb depth measurements are from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Dimensions in parentheses are in millimeters. Clad details shown, wood also available. 194

5 ENTRANCEWAYS Springline Outswing Entry Details " (116) Jamb Depth " Unobstr " (164) (164) Unit Dimension Rough Opening " Unobstr " (311) Unobstr " (164) Unit Dimension (164) Rough Opening Rough Opening Unit Dimension " (164) Unobstr " (303) Dimension from top of sill to subfloor will vary based on thickness of sill flashing " (38) Entranceways Two-Panel 4 9 / 16" (116) jamb depth measurement is from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Dimensions in parentheses are in millimeters. Clad details shown, wood also available. 195

6 RESIDENTIAL ENTRY DOORS Order Designation Description Viewed from the exterior. 17 AEAHID 3168 A L 17 AEAHID 3168 A R 17 AEAHID 6480 A P L R Flanking unit width rough opg. Active panel Left hinged Flanking unit width rough opg. Active panel Right hinged Flanking unit width rough opg. Passive panel Right hinged Andersen Entry Arch Hinged Inswing Andersen Entry Arch Hinged Inswing Andersen Entry Arch Hinged Inswing Active panel Left hinged Arch inswing entry doors (AEAHID) shown above, for outswing arch entry doors use AEAOD. Outswing entry doors open outward to the exterior. Custom-size doors are available in 1 8" (3) increments. AEAHIDxx68 AEAHIDxx80 AEAHIDxx68AP/PA AEAHIDxx80AP/PA Arch Inswing Entry Dimensions and Specifications of Panels Open* Radius Dimensions Shoulder Min. Rough Opening Available in custom designed panels, see page 192. Stationary doors are also available (i.e. AEAHID2068S or AEAHID4068SS). Clear Opening 90 Clear Opening Maximums Full Vent Overall AEAHID / 16" (941) / 16" (2024) / 16" (652) 82" (2083) 26 3/ 16" (665) 82 1 / 2" (2096) (1.14) / 16" (529) 22 7 / 8" (581) 77 3 / 16" (1961) (1.16) (1.35) AEAHID " (1219) 79 5 / 16" (2015) / 16" (805) 82" (2083) 32 3/ 16" (818) 82 1 / 2" (2096) (1.43) / 16" (681) 28 7 / 8" (733) 76 3 / 4" (1949) (1.46) (1.66) AEAHID " (1219) / 16" (2005) / 16" (856) 82" (2083) 34 3/ 16" (868) 82 1 / 2" (2096) (1.52) / 16" (732) 30 7 / 8" (784) 76 7 / 16" (1942) (1.56) (1.76) AEAHID " (1219) 78 1 /8" (1984) /16" (957) 82" (2083) 38 3/16" (970) 82 1 /2" (2096) (1.70) /16" (833) 34 7 /8" (886) /16" (1922) (1.75) (1.96) AEAHID " (1219) 76 3 /4" (1949) /16" (1110) 82" (2083) 44 3/16" (1122) 82 1 /2" (2096) (1.96) /16" (986) 40 7 /8" (1038) 74 3 /8" (1889) (2.04) (2.26) AEAHID /16" (941) /16" (2354) /16" (652) 95" (2413) 26 3/16" (665) 95 1 /2" (2426) (1.33) /16" (529) 22 7 /8" (581) 90 3 /16" (2291) (1.35) (1.56) AEAHID " (1219) 92 5 / 16" (2345) / 16" (805) 95" (2413) 32 3/ 16" (818) 95 1 / 2" (2426) (1.67) / 16" (681) 28 7 / 8" (733) 89 3 / 4" (2280) (1.70) (1.92) AEAHID " (1219) /16" (2335) /16" (856) 95" (2413) 34 3/16" (868) 95 1 /2" (2426) (1.78) /16" (732) 30 7 /8" (784) 89 7 /16" (2272) (1.82) (2.04) AEAHID " (1219) 91 1 / 8" (2315) / 16" (957) 95" (2413) 38 3/ 16" (970) 95 1 / 2" (2426) (2.00) / 16" (833) 34 7 / 8" (886) / 16" (2253) (2.05) (2.28) AEAHID " (1219) 89 3 /4" (2280) /16" (1110) 95" (2413) 44 3/16" (1122) 95 1 /2" (2426) (2.30) /16" (986) 40 7 /8" (1038) 87 3 /8" (2219) (2.39) (2.63) AEAHID " (1219) 74 3 / 4" (1899) 50 3 / 4" (1289) 82" (2083) 51 1/ 4" (1302) 82 1 / 2" (2096) (2.24) / 16" (1113) / 16" (1218) 72 7 / 16" (1840) (2.38) (2.61) AEAHID " (1219) 74 3 /4" (1899) 50 3 /4" (1289) 82" (2083) 51 1/4" (1302) 82 1 /2" (2096) (1.07) 20 7 /8" (530) /16" (583) 72 7 /16" (1840) (1.14) (2.61) AEAHID " (2438) 76 3 / 4" (1949) 62 3 / 4" (1594) 82" (2083) 63 1/ 4" (1607) 82 1 / 2" (2096) (2.87) / 16" (1418) / 16" (1522) 74 3 / 16" (1884) (3.00) (3.25) AEAHID " (2438) 76 3 /4" (1949) 62 3 /4" (1594) 82" (2083) 63 1/4" (1607) 82 1 /2" (2096) (1.39) 26 7 /8" (683) /16" (735) 74 3 /16" (1884) (1.44) (3.25) AEAHID " (2438) 76" (1930) 66 3 / 4" (1695) 82" (2083) 67 1/ 4" (1708) 82 1 / 2" (2096) (3.03) / 16" (1519) / 16" (1624) 73 1 / 2" (1867) (3.19) (3.45) AEAHID " (2438) 76" (1930) 66 3 / 4" (1695) 82" (2083) 67 1/ 4" (1708) 82 1 / 2" (2096) (1.47) 28 7 / 8" (733) / 16" (786) 73 1 / 2" (1867) (1.54) (3.45) AEAHID " (2438) 74 7 / 16" (1891) 74 3 / 4" (1899) 82" (2083) 75 1/ 4" (1911) 82 1 / 2" (2096) (3.34) / 16" (1722) / 16" (1827) / 16" (1827) (3.56) (3.83) AEAHID " (2438) 74 7 / 16" (1891) 74 3 / 4" (1899) 82" (2083) 75 1/ 4" (1911) 82 1 / 2" (2096) (1.62) 32 7 / 8" (835) / 16" (887) / 16" (1827) (1.73) (3.83) AEAHID " (2438) 71 5 / 8" (1819) 86 3 / 4" (2203) 82" (2083) 87 1/ 4" (2216) 82 1 / 2" (2096) (3.75) / 16" (2027) / 16" (2132) 69 1 / 4" (1759) (4.11) (4.40) AEAHID " (2438) 71 5 / 8" (1819) 86 3 / 4" (2203) 82" (2083) 87 1/ 4" (2216) 82 1 / 2" (2096) (1.83) 38 7 / 8" (987) / 16" (1040) 69 1 / 4" (1759) (2.00) (4.40) AEAHID " (1219) 87 3 /4" (2229) 50 3 /4" (1289) 95" (2413) 51 1/4" (1302) 95 1 /2" (2426) (2.64) /16" (1113) /16" (1218) 85 7 /16" (2170) (2.78) (3.03) AEAHID " (1219) 87 3 / 4" (2229) 50 3 / 4" (1289) 95" (2413) 51 1/ 4" (1302) 95 1 / 2" (2426) (1.26) 20 7 / 8" (530) / 16" (583) 85 7 / 16" (2170) (1.33) (3.03) AEAHID " (2438) 89 3 / 4" (2280) 62 3 / 4" (1594) 95" (2413) 63 1/ 4" (1607) 95 1 / 2" (2426) (3.37) / 16" (1418) / 16" (1522) 87 3 / 16" (2215) (3.50) (3.78) AEAHID " (2438) 89 3 / 4" (2280) 62 3 / 4" (1594) 95" (2413) 63 1/ 4" (1607) 95 1 / 2" (2426) (1.63) 26 7 / 8" (683) / 16" (735) 87 3 / 16" (2215) (1.69) (3.78) AEAHID " (2438) 89" (2261) 66 3 /4" (1695) 95" (2413) 67 1/4" (1708) 95 1 /2" (2426) (3.57) /16" (1519) /16" (1624) 86 1 /2" (2197) (3.72) (4.01) AEAHID " (2438) 89" (2261) 66 3 /4" (1695) 95" (2413) 67 1/4" (1708) 95 1 /2" (2426) (1.73) 28 7 /8" (733) /16" (786) 86 1 /2" (2197) (1.80) (4.01) AEAHID " (2438) 87 7 / 16" (2221) 74 3 / 4" (1899) 95" (2413) 75 1/ 4" (1911) 95 1 / 2" (2426) (3.94) / 16" (1722) / 16" (1827) / 16" (2157) (4.16) (4.46) AEAHID " (2438) 87 7 / 16" (2221) 74 3 / 4" (1899) 95" (2413) 75 1/ 4" (1911) 95 1 / 2" (2426) (1.91) 32 7 / 8" (835) / 16" (887) / 16" (2157) (2.02) (4.46) AEAHID " (2438) 84 5 / 8" (2149) 86 3 / 4" (2203) 95" (2413) 87 1/ 4" (2216) 95 1 / 2" (2426) (4.45) / 16" (2027) / 16" (2132) 82 1 / 4" (2089) (4.81) (5.13) AEAHID " (2438) 84 5 / 8" (2149) 86 3 / 4" (2203) 95" (2413) 87 1/ 4" (2216) 95 1 / 2" (2426) (2.17) 38 7 / 8" (987) / 16" (1040) 82 1 / 4" (2089) (2.34) (5.13) " Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed. 196

7 ENTRANCEWAYS Custom-size doors are available in 1 8" (3) increments. AEAODxx68 AEAODxx80 AEAODxx68AP/PA AEAODxx80AP/PA Available in custom designed panels, see page 192. Stationary doors are also available (i.e. AEAOD2068S or AEAOD4068SS). Arch Outswing Entry Dimensions and Specifications of Panels Open* Radius Dimensions Min. Rough Opening Clear Shoulder Opening 90 Clear Opening Maximums Full Vent Overall AEAOD /16" (941) /16" (2024) /16" (652) 82" (2083) 26 3/16" (665) 82 1 /2" (2096) (1.15) 21 1 /8" (537) 23 1 /16" (586) 77 1 /4" (1962) (1.17) (1.35) AEAOD " (1219) 79 5 /16" (2015) /16" (805) 82" (2083) 32 3/16" (818) 82 1 /2" (2096) (1.44) 27 1 /8" (689) 29 1 /16" (738) /16" (1951) (1.47) (1.66) AEAOD " (1219) /16" (2005) /16" (856) 82" (2083) 34 3/16" (868) 82 1 /2" (2096) (1.53) 29 1 /8" (740) 31 1 /16" (789) 76 1 /2" (1943) (1.57) (1.76) AEAOD " (1219) 78 1 /8" (1984) /16" (957) 82" (2083) 38 3/16" (970) 82 1 /2" (2096) (1.71) 33 1 /8" (841) 35 1 /16" (891) 75 3 /4" (1924) (1.77) (1.96) AEAOD " (1219) 76 3 /4" (1949) /16" (1110) 82" (2083) 44 3/16" (1122) 82 1 /2" (2096) (1.97) 39 1 /8" (994) 41 1 /16" (1043) 74 3 /8" (1889) (2.06) (2.26) AEAOD /16" (941) /16" (2354) /16" (652) 95" (2413) 26 3/16" (665) 95 1 /2" (2426) (1.15) 21 1 /8" (537) 23 1 /16" (586) 77 1 /4" (1962) (1.36) (1.56) AEAOD " (1219) 92 5 /16" (2345) /16" (805) 95" (2413) 32 3/16" (818) 95 1 /2" (2426) (1.44) 27 1 /8" (689) 29 1 /16" (738) /16" (1951) (1.71) (1.92) AEAOD " (1219) / 16" (2335) / 16" (856) 95" (2413) 34 3/ 16" (868) 95 1 / 2" (2426) (1.53) 29 1 / 8" (740) 31 1 / 16" (789) 76 1 / 2" (1943) (1.83) (2.04) AEAOD " (1219) 91 1 / 8" (2315) / 16" (957) 95" (2413) 38 3/ 16" (970) 95 1 / 2" (2426) (1.71) 33 1 / 8" (841) 35 1 / 16" (891) 75 3 / 4" (1924) (2.06) (2.28) AEAOD " (1219) 89 3 / 4" (2280) / 16" (1110) 95" (2413) 44 3/ 16" (1122) 95 1 / 2" (2426) (1.97) 39 1 / 8" (994) 41 1 / 16" (1043) 74 3 / 8" (1889) (2.40) (2.63) AEAOD " (1219) 74 3 /4" (1899) 50 3 /4" (1289) 82" (2083) 51 1/4" (1302) 82 1 /2" (2096) (2.25) 44 3 /16" (1122) 48 1 /8" (1222) 72 1 /2" (1842) (2.39) (2.61) AEAOD " (1219) 74 3 / 4" (1899) 50 3 / 4" (1289) 82" (2083) 51 1/ 4" (1302) 82 1 / 2" (2096) (1.08) 21" (533) 23" (584) 72 1 / 2" (1842) (1.14) (2.61) AEAOD " (2438) 76 3 /4" (1949) 62 3 /4" (1594) 82" (2083) 63 1/4" (1607) 82 1 /2" (2096) (2.88) 56 3 /16" (1427) 60 1 /8" (1527) 74 1 /4" (1886) (3.01) (3.25) AEAOD " (2438) 76 3 / 4" (1949) 62 3 / 4" (1594) 82" (2083) 63 1/ 4" (1607) 82 1 / 2" (2096) (1.39) 27" (686) 29" (737) 74 1 / 4" (1886) (1.45) (3.25) AEAOD " (2438) 76" (1930) 66 3 /4" (1695) 82" (2083) 67 1/4" (1708) 82 1 /2" (2096) (3.04) 60 3 /16" (1529) 64 1 /8" (1629) 73 9 /16" (1868) (3.20) (3.45) AEAOD " (2438) 76" (1930) 66 3 / 4" (1695) 82" (2083) 67 1/ 4" (1708) 82 1 / 2" (2096) (1.47) 29" (737) 31" (787) 73 9 / 16" (1868) (1.54) (3.45) AEAOD " (2438) 74 7 / 16" (1891) 74 3 / 4" (1899) 82" (2083) 75 1/ 4" (1911) 82 1 / 2" (2096) (3.35) 68 3 / 16" (1732) 72 1 / 8" (1832) 72" (1829) (3.57) (3.83) AEAOD " (2438) 74 7 / 16" (1891) 74 3 / 4" (1899) 82" (2083) 75 1/ 4" (1911) 82 1 / 2" (2096) (1.63) 33" (838) 35" (889) 72" (1829) (1.73) (3.83) AEAOD " (2438) 71 5 /8" (1819) 86 3 /4" (2203) 82" (2083) 87 1/4" (2216) 82 1 /2" (2096) (3.76) 80 3 /16" (2037) 84 1 /8" (2137) 69 5 /16" (1761) (4.12) (4.40) AEAOD " (2438) 71 5 /8" (1819) 86 3 /4" (2203) 82" (2083) 87 1/4" (2216) 82 1 /2" (2096) (1.83) 39" (991) 41" (1041) 69 5 /16" (1761) (2.01) (4.40) AEAOD " (1219) 87 3 /4" (2229) 50 3 /4" (1289) 95" (2413) 51 1/4" (1302) 95 1 /2" (2426) (2.65) 44 3 /16" (1122) 48 1 /8" (1222) 85 1 /2" (2172) (2.79) (3.03) AEAOD " (1219) 87 3 / 4" (2229) 50 3 / 4" (1289) 95" (2413) 51 1/ 4" (1302) 95 1 / 2" (2426) (1.27) 21" (533) 23" (584) 85 1 / 2" (2172) (1.33) (3.03) AEAOD " (2438) 89 3 / 4" (2280) 62 3 / 4" (1594) 95" (2413) 63 1/ 4" (1607) 95 1 / 2" (2426) (3.38) 56 3 / 16" (1427) 60 1 / 8" (1527) 87 1 / 4" (2216) (3.51) (3.78) AEAOD " (2438) 89 3 /4" (2280) 62 3 /4" (1594) 95" (2413) 63 1/4" (1607) 95 1 /2" (2426) (1.63) 27" (686) 29" (737) 87 1 /4" (2216) (1.69) (3.78) AEAOD " (2438) 89" (2261) 66 3 / 4" (1695) 95" (2413) 67 1/ 4" (1708) 95 1 / 2" (2426) (3.58) 60 3 / 16" (1529) 64 1 / 8" (1629) 86 9 / 16" (2199) (3.74) (4.01) AEAOD " (2438) 89" (2261) 66 3 /4" (1695) 95" (2413) 67 1/4" (1708) 95 1 /2" (2426) (1.73) 29" (737) 31" (787) 86 9 /16" (2199) (1.81) (4.01) AEAOD " (2438) 87 7 / 16" (2221) 74 3 / 4" (1899) 95" (2413) 75 1/ 4" (1911) 95 1 / 2" (2426) (3.95) 68 3 / 16" (1732) 72 1 / 8" (1832) 85" (2159) (4.18) (4.46) AEAOD " (2438) 87 7 /16" (2221) 74 3 /4" (1899) 95" (2413) 75 1/4" (1911) 95 1 /2" (2426) (1.92) 33" (838) 35" (889) 85" (2159) (2.03) (4.46) AEAOD " (2438) 84 5 /8" (2149) 86 3 /4" (2203) 95" (2413) 87 1/4" (2216) 95 1 /2" (2426) (4.47) 80 3 /16" (2037) 84 1 /8" (2137) 82 5 /16" (2091) (4.83) (5.13) AEAOD " (2438) 84 5 / 8" (2149) 86 3 / 4" (2203) 95" (2413) 87 1/ 4" (2216) 95 1 / 2" (2426) (2.18) 39" (991) 41" (1041) 82 5 / 16" (2091) (2.35) (5.13) Entranceways " Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed. Direct-Set and Sash-Set Arch Entry Sidelights Direct-set (AEASLD), sash-set inswing (AEASLI) and sash-set outswing (AEASLO) entry door sidelights shown. Contact your Andersen supplier for dimensions and specifications. AEASLDxx68 AEASLDxx80 AEASLIxx68 AEASLIxx80 AEASLOxx68 AEASLOxx80 197

8 RESIDENTIAL ENTRY DOORS Order Designation Description Viewed from the exterior. 17 AEHID 3168 A L 17 AEHID 3168 A R 17 AEHID 6480 A P L R Flanking unit width rough opg. Active panel Left hinged Flanking unit width rough opg. Active panel Right hinged Flanking unit width rough opg. Passive panel Right hinged Andersen Entry Hinged Inswing Andersen Entry Hinged Inswing Andersen Entry Hinged Inswing Active panel Left hinged Inswing entry doors (AEHID) shown above, for outswing entry doors use AEOD. Outswing entry doors open outward to the exterior. Custom-size doors are available in 1 8" (3) increments. AEHIDxx68 AEHIDxx80 AEHIDxx68AP/PA AEHIDxx80AP/PA Available in custom designed panels, see page 192. Stationary doors are also available (i.e. AEHID2068S or AEHID4068SS). Rectangular Inswing Entry Dimensions and Specifications of Panels Open* Min. Rough Opening Clear Opening 90 Clear Opening Maximums Full Vent Overall AEHID / 16" (652) 82" (2083) 26 3 / 16" (665) 82 1 / 2" (2096) (1.17) / 16" (529) 22 7 / 8" (581) 79 1 / 16" (2008) (1.17) (1.36) AEHID /16" (805) 82" (2083) 32 3 /16" (818) 82 1 /2" (2096) (1.47) /16" (681) 28 7 /8" (733) 79 1 /16" (2008) (1.47) (1.68) AEHID / 16" (856) 82" (2083) 34 3 / 16" (868) 82 1 / 2" (2096) (1.57) / 16" (732) 30 7 / 8" (784) 79 1 / 16" (2008) (1.57) (1.78) AEHID /16" (957) 82" (2083) 38 3 /16" (970) 82 1 /2" (2096) (1.78) /16" (833) 34 7 /8" (886) 79 1 /16" (2008) (1.78) (1.99) AEHID / 16" (1110) 82" (2083) 44 3 / 16" (1122) 82 1 / 2" (2096) (2.08) / 16" (986) 40 7 / 8" (1038) 79 1 / 16" (2008) (2.08) (2.31) AEHID /16" (652) 95" (2413) 26 3 /16" (665) 95 1 /2" (2426) (1.36) /16" (529) 22 7 /8" (581) 92 1 /16" (2338) (1.36) (1.57) AEHID /16" (805) 95" (2413) 32 3 /16" (818) 95 1 /2" (2426) (1.71) /16" (681) 28 7 /8" (733) 92 1 /16" (2338) (1.71) (1.94) AEHID /16" (856) 95" (2413) 34 3 /16" (868) 95 1 /2" (2426) (1.83) /16" (732) 30 7 /8" (784) 92 1 /16" (2338) (1.83) (2.06) AEHID / 16" (957) 95" (2413) 38 3 / 16" (970) 95 1 / 2" (2426) (2.07) / 16" (833) 34 7 / 8" (886) 92 1 / 16" (2338) (2.07) (2.31) AEHID / 16" (1110) 95" (2413) 44 3 / 16" (1122) 95 1 / 2" (2426) (2.43) / 16" (986) 40 7 / 8" (1038) 92 1 / 16" (2338) (2.43) (2.68) AEHID /4" (1289) 82" (2083) 51 1 /4" (1302) 82 1 /2" (2096) (2.45) /16" (1113) /16" (1218) 79 1 /16" (2008) (2.45) (2.68) AEHID /4" (1289) 82" (2083) 51 1 /4" (1302) 82 1 /2" (2096) (1.17) 20 7 /8" (530) /16" (583) 79 1 /16" (2008) (1.17) (2.68) AEHID / 4" (1594) 82" (2083) 63 1 / 4" (1607) 82 1 / 2" (2096) (3.06) / 16" (1418) / 16" (1522) 79 1 / 16" (2008) (3.06) (3.32) AEHID / 4" (1594) 82" (2083) 63 1 / 4" (1607) 82 1 / 2" (2096) (1.48) 26 7 / 8" (683) / 16" (735) 79 1 / 16" (2008) (1.48) (3.32) AEHID / 4" (1695) 82" (2083) 67 1 / 4" (1708) 82 1 / 2" (2096) (3.26) / 16" (1519) / 16" (1624) 79 1 / 16" (2008) (3.26) (3.53) AEHID / 4" (1695) 82" (2083) 67 1 / 4" (1708) 82 1 / 2" (2096) (1.58) 28 7 / 8" (733) / 16" (786) 79 1 / 16" (2008) (1.58) (3.53) AEHID /4" (1899) 82" (2083) 75 1 /4" (1911) 82 1 /2" (2096) (3.67) /16" (1722) /16" (1827) 79 1 /16" (2008) (3.67) (3.95) AEHID / 4" (1899) 82" (2083) 75 1 / 4" (1911) 82 1 / 2" (2096) (1.78) 32 7 / 8" (835) / 16" (887) 79 1 / 16" (2008) (1.78) (3.95) AEHID / 4" (2203) 82" (2083) 87 1 / 4" (2216) 82 1 / 2" (2096) (4.28) / 16" (2027) / 16" (2132) 79 1 / 16" (2008) (4.28) (4.59) AEHID / 4" (2203) 82" (2083) 87 1 / 4" (2216) 82 1 / 2" (2096) (2.09) 38 7 / 8" (987) / 16" (1040) 79 1 / 16" (2008) (2.09) (4.59) AEHID /4" (1289) 95" (2413) 51 1 /4" (1302) 95 1 /2" (2426) (2.85) /16" (1113) /16" (1218) 92 1 /16" (2338) (2.85) (3.11) AEHID / 4" (1289) 95" (2413) 51 1 / 4" (1302) 95 1 / 2" (2426) (1.36) 20 7 / 8" (530) / 16" (583) 92 1 / 16" (2338) (1.36) (3.11) AEHID / 4" (1594) 95" (2413) 63 1 / 4" (1607) 95 1 / 2" (2426) (3.56) / 16" (1418) / 16" (1522) 92 1 / 16" (2338) (3.56) (3.85) AEHID / 4" (1594) 95" (2413) 63 1 / 4" (1607) 95 1 / 2" (2426) (1.72) 26 7 / 8" (683) / 16" (735) 92 1 / 16" (2338) (1.72) (3.85) AEHID /4" (1695) 95" (2413) 67 1 /4" (1708) 95 1 /2" (2426) (3.80) /16" (1519) /16" (1624) 92 1 /16" (2338) (3.80) (4.09) AEHID / 4" (1695) 95" (2413) 67 1 / 4" (1708) 95 1 / 2" (2426) (1.84) 28 7 / 8" (733) / 16" (786) 92 1 / 16" (2338) (1.84) (4.09) AEHID / 4" (1899) 95" (2413) 75 1 / 4" (1911) 95 1 / 2" (2426) (4.27) / 16" (1722) / 16" (1827) 92 1 / 16" (2338) (4.27) (4.58) AEHID /4" (1899) 95" (2413) 75 1 /4" (1911) 95 1 /2" (2426) (2.08) 32 7 /8" (835) /16" (887) 92 1 /16" (2338) (2.08) (4.58) AEHID / 4" (2203) 95" (2413) 87 1 / 4" (2216) 95 1 / 2" (2426) (4.99) / 16" (2027) / 16" (2132) 92 1 / 16" (2338) (4.99) (5.32) AEHID / 4" (2203) 95" (2413) 87 1 / 4" (2216) 95 1 / 2" (2426) (2.43) 38 7 / 8" (987) / 16" (1040) 92 1 / 16" (2338) (2.43) (5.32) " Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed. 198

9 ENTRANCEWAYS Custom-size doors are available in 1 8" (3) increments. AEODxx68 AEODxx80 AEODxx68AP/PA AEODxx80AP/PA Available in custom designed panels, see page 192. Stationary doors are also available (i.e. AEOD2068S or AEOD4068SS). Rectangular Outswing Entry Dimensions and Specifications of Panels Open* Min. Rough Opening Clear Opening 90 Clear Opening Maximums Full Vent Overall AEOD / 16" (652) 82" (2083) 26 3 / 16" (665) 82 1 / 2" (2096) (1.18) 21 1 / 8" (537) 23 1 / 16" (586) 79 3 / 16" (2011) (1.17) (1.36) AEOD /16" (805) 82" (2083) 32 3 /16" (818) 82 1 /2" (2096) (1.48) 27 1 /8" (689) 29 1 /16" (738) 79 3 /16" (2011) (1.47) (1.68) AEOD /16" (856) 82" (2083) 34 3 /16" (868) 82 1 /2" (2096) (1.59) 29 1 /8" (740) 31 1 /16" (789) 79 3 /16" (2011) (1.57) (1.78) AEOD /16" (957) 82" (2083) 38 3 /16" (970) 82 1 /2" (2096) (1.79) 33 1 /8" (841) 35 1 /16" (891) 79 3 /16" (2011) (1.77) (1.99) AEOD /16" (1110) 82" (2083) 44 3 /16" (1122) 82 1 /2" (2096) (2.10) 39 1 /8" (994) 41 1 /16" (1043) 79 3 /16" (2011) (2.06) (2.31) AEOD /16" (652) 95" (2413) 26 3 /16" (665) 95 1 /2" (2426) (1.37) 21 1 /8" (537) 23 1 /16" (586) 92 3 /16" (2342) (1.36) (1.57) AEOD /16" (805) 95" (2413) 32 3 /16" (818) 95 1 /2" (2426) (1.73) 27 1 /8" (689) 29 1 /16" (738) 92 3 /16" (2342) (1.71) (1.94) AEOD /16" (856) 95" (2413) 34 3 /16" (868) 95 1 /2" (2426) (1.85) 29 1 /8" (740) 31 1 /16" (789) 92 3 /16" (2342) (1.83) (2.06) AEOD / 16" (957) 95" (2413) 38 3 / 16" (970) 95 1 / 2" (2426) (2.09) 33 1 / 8" (841) 35 1 / 16" (891) 92 3 / 16" (2342) (2.06) (2.31) AEOD /16" (1110) 95" (2413) 44 3 /16" (1122) 95 1 /2" (2426) (2.44) 39 1 /8" (994) 41 1 /16" (1043) 92 3 /16" (2342) (2.40) (2.68) AEOD / 4" (1289) 82" (2083) 51 1 / 4" (1302) 82 1 / 2" (2096) (2.46) 44 3 / 16" (1122) 48 1 / 8" (1222) 79 3 / 16" (2011) (2.39) (2.68) AEOD /4" (1289) 82" (2083) 51 1 /4" (1302) 82 1 /2" (2096) (1.18) 21" (533) 23" (584) 79 3 /16" (2011) (1.14) (2.68) AEOD / 4" (1594) 82" (2083) 63 1 / 4" (1607) 82 1 / 2" (2096) (3.07) 56 3 / 16" (1427) 60 1 / 8" (1527) 79 3 / 16" (2011) (3.01) (3.32) AEOD /4" (1594) 82" (2083) 63 1 /4" (1607) 82 1 /2" (2096) (1.48) 27" (686) 29" (737) 79 3 /16" (2011) (1.45) (3.32) AEOD / 4" (1695) 82" (2083) 67 1 / 4" (1708) 82 1 / 2" (2096) (3.28) 60 3 / 16" (1529) 64 1 / 8" (1629) 79 3 / 16" (2011) (3.20) (3.53) AEOD /4" (1695) 82" (2083) 67 1 /4" (1708) 82 1 /2" (2096) (1.58) 29" (737) 31" (787) 79 3 /16" (2011) (1.54) (3.53) AEOD /4" (1899) 82" (2083) 75 1 /4" (1911) 82 1 /2" (2096) (3.68) 68 3 /16" (1732) 72 1 /8" (1832) 79 3 /16" (2011) (3.57) (3.95) AEOD /4" (1899) 82" (2083) 75 1 /4" (1911) 82 1 /2" (2096) (1.79) 33" (838) 35" (889) 79 3 /16" (2011) (1.73) (3.95) AEOD / 4" (2203) 82" (2083) 87 1 / 4" (2216) 82 1 / 2" (2096) (4.30) 80 3 / 16" (2037) 84 1 / 8" (2137) 79 3 / 16" (2011) (4.12) (4.59) AEOD /4" (2203) 82" (2083) 87 1 /4" (2216) 82 1 /2" (2096) (2.09) 39" (991) 41" (1041) 79 3 /16" (2011) (2.01) (4.59) AEOD /4" (1289) 95" (2413) 51 1 /4" (1302) 95 1 /2" (2426) (2.86) 44 3 /16" (1122) 48 1 /8" (1222) 92 3 /16" (2342) (2.79) (3.11) AEOD /4" (1289) 95" (2413) 51 1 /4" (1302) 95 1 /2" (2426) (1.37) 21" (533) 23" (584) 92 3 /16" (2342) (1.33) (3.11) AEOD / 4" (1594) 95" (2413) 63 1 / 4" (1607) 95 1 / 2" (2426) (3.58) 56 3 / 16" (1427) 60 1 / 8" (1527) 92 3 / 16" (2342) (3.51) (3.85) AEOD / 4" (1594) 95" (2413) 63 1 / 4" (1607) 95 1 / 2" (2426) (1.73) 27" (686) 29" (737) 92 3 / 16" (2342) (1.69) (3.85) AEOD /4" (1695) 95" (2413) 67 1 /4" (1708) 95 1 /2" (2426) (3.81) 60 3 /16" (1529) 64 1 /8" (1629) 92 3 /16" (2342) (3.74) (4.09) AEOD /4" (1695) 95" (2413) 67 1 /4" (1708) 95 1 /2" (2426) (1.84) 29" (737) 31" (787) 92 3 /16" (2342) (1.81) (4.09) AEOD /4" (1899) 95" (2413) 75 1 /4" (1911) 95 1 /2" (2426) (4.29) 68 3 /16" (1732) 72 1 /8" (1832) 92 3 /16" (2342) (4.18) (4.58) AEOD / 4" (1899) 95" (2413) 75 1 / 4" (1911) 95 1 / 2" (2426) (2.08) 33" (838) 35" (889) 92 3 / 16" (2342) (2.03) (4.58) AEOD /4" (2203) 95" (2413) 87 1 /4" (2216) 95 1 /2" (2426) (5.00) 80 3 /16" (2037) 84 1 /8" (2137) 92 3 /16" (2342) (4.83) (5.32) AEOD / 4" (2203) 95" (2413) 87 1 / 4" (2216) 95 1 / 2" (2426) (2.44) 39 (991) 41" (1041) 92 3 / 16" (2342) (2.35) (5.32) Entranceways " Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. *For two-panel patio doors with one panel open, clear opening is based on active panel being open and passive panel being closed. Direct-Set Rectangular Entry Sidelight Dimensions and Specifications Sidelight Sidelight Dimensions Min. Rough Opening Overall Sidelight AESLD /16" (252) 82" (2083) 10 7 /16" (265) 82 1 /2" (2096) 3.77 (0.35) 5.66 (0.53) AESLD / 16" (405) 82" (2083) 16 7 / 16" (418) 82 1 / 2" (2096) 7.03 (0.65) 9.08 (0.84) AESLD / 16" (652) 82" (2083) 26 3 / 16" (665) 82 1 / 2" (2096) (1.14) (1.36) AESLD / 16" (957) 82" (2083) 38 3 / 16" (970) 82 1 / 2" (2096) (1.75) (1.99) AESLD /16" (252) 95" (2413) 10 7 /16" (265) 95 1 /2" (2426) 4.40 (0.41) 6.56 (0.61) AESLD / 16" (405) 95" (2413) 16 7 / 16" (418) 95 1 / 2" (2426) 8.19 (0.76) (0.98) AESLD / 16" (652) 95" (2413) 26 3 / 16" (665) 95 1 / 2" (2426) (1.33) (1.57) AESLD / 16" (957) 95" (2413) 38 3 / 16" (970) 95 1 / 2" (2426) (2.04) (2.31) Sidelight Dimension always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. Direct-Set & Sash-Set Rectangular Entry Sidelights AESLDxx68 AESLDxx80 AESLIxx68 AESLIxx80 AESLOxx68 AESLOxx80 Direct-set (AESLD), sash-set inswing (AESLI) and sash-set outswing (AESLO) entry door sidelights shown. Dimensions and specifications shown for direct-set sidelights, contact your Andersen supplier for sash-set sidelight dimensions and specifications. 199

10 RESIDENTIAL ENTRY DOORS Arch and Rectangular Inswing Entry Details " (116) and " (167) Jamb Depth " " (167) " " (167) Rough Opening Unit Dimension Unobstr " (186) " (186) " (297) Dimension from top of sill to subfloor will vary based on thickness of sill flashing " (38) Dimension from top of sill to subfloor will vary based on thickness of sill flashing " (38) Rough Opening Unit Dimension Unobstr " (297) Dimension from top of sill to subfloor will vary based on thickness of sill flashing " (38) Dimension from top of sill to subfloor will vary based on thickness of sill flashing " (38) Arch Rectangular Arch and Rectangular Inswing Entry Details " (116) Jamb Depth " Unobstr " (164) (164) Unit Dimension Rough Opening " Unobstr " (311) Unobstr " (164) Unit Dimension (164) Rough Opening Two-Panel 4 9 / 16" (116) and 6 9 / 16" (167) jamb depth measurements are from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Dimensions in parentheses are in millimeters. Clad details shown, wood also available. 200

11 ENTRANCEWAYS Arch and Rectangular Inswing Entry Details " (167) Jamb Depth " " (167) " Unobstr " (164) (164) Unit Dimension Rough Opening " " (167) " Unobstr " (311) Unobstr " (164) Unit Dimension (164) Rough Opening Entranceways Arch and Rectangular Outswing Entry Details Two-Panel Rough Opening Unit Dimension " (186) " (186) Unobstr " (303) Dimension from top of sill to subfloor will vary based on thickness of sill flashing. Rough Opening Unit Dimension " Unobstr. (303) Dimension from top of sill to subfloor will vary based on thickness of sill flashing " (38) 1 1 2" (38) Arch Rectangular 4 9 / 16" (116) and 6 9 / 16" (167) jamb depth measurement is from backside of installation flange. Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen parts required to complete window and/or door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Dimensions in parentheses are in millimeters. Clad details shown, wood also available. 201

12 RESIDENTIAL ENTRY DOORS Arch and Rectangular Outswing Entry Details " Unobstr " (164) (164) Unit Dimension Rough Opening " Unobstr " (311) Unobstr " (164) Unit Dimension (164) Rough Opening Two-Panel Arch and Rectangular Entry Sidelight Details " (186) 1 1 4" (32) Rough Opening Unit Dimension Unobstructed 1 1 2" (38) Rough Opening Unit Dimension Unobstr " (297) " (59) 2 1 2" (64) Direct-Set Arch Direct-Set Rectangular Sash-Set Arch Sash-Set Rectangular 4 9 / 16" (116) jamb depth measurement is from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Dimensions in parentheses are in millimeters. Clad details shown, wood also available. 202

13 ENTRANCEWAYS Vertical Joining Details Jamb to Jamb 1 5 8" (41) 1 5 8" (41) 1 5 8" (41) 1 5 8" (41) Non-reinforced jamb to jamb and 1 2" (13) wide wood joining shown. 1" (25) and 2" (51) wide joining also 0" Inswing Entry to Direct-Set Arch or Rectangular Sidelight " (116) Jamb Depth 0" Inswing Entry to Sash-Set Arch or Rectangular Sidelight " (116) Jamb Depth 0" Inswing Entry to Sash-Set Arch or Rectangular Sidelight " (167) Jamb Depth 0" Outswing Entry to Sash-Set Arch or Rectangular Sidelight " (116) Jamb Depth available. Contact your Andersen supplier for additional joining information. Vertical Joining Details Wood 2 1 8" (54) Entranceways 2 1 8" (54) 2 1 8" (54) 2 1 8" (54) 1 2" (13) 1 2" (13) 1 2" (13) 1 2" (13) Inswing Entry to Direct-Set Arch or Rectangular Sidelight " (116) Jamb Depth Inswing Entry to Sash-Set Arch or Rectangular Sidelight " (116) Jamb Depth Inswing Entry to Sash-Set Arch or Rectangular Sidelight " (167) Jamb Depth Outswing Entry to Sash-Set Arch or Rectangular Sidelight " (116) Jamb Depth Vertical Joining Details LVL 2 3 8" (60) 2 3 8" (60) 2 3 8" (60) 2 3 8" (60) 3 4" (19) 3 4" (19) 3 4" (19) 3 4" (19) Inswing Entry to Direct-Set Arch or Rectangular Sidelight " (116) Jamb Depth Inswing Entry to Sash-Set Arch or Rectangular Sidelight " (116) Jamb Depth Inswing Entry to Sash-Set Arch or Rectangular Sidelight " (167) Jamb Depth Outswing Entry to Sash-Set Arch or Rectangular Sidelight " (116) Jamb Depth 4 9 / 16" (116) jamb depth measurement is from backside of installation flange. Light-colored areas are parts included with door. Dark-colored areas are additional Andersen parts required to complete door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings. Dimensions in parentheses are in millimeters. Clad details shown, wood also available. 203

14 ENTRY DOOR TRANSOMS FEATURES Transoms are sized to fit over Andersen residential and commercial entry doors and other Andersen products. They are also available in custom sizes. Contact your Andersen supplier for details. Frame Thick aluminum cladding finish. Standard cladding finish meets AAMA An optional finish that meets the AAMA 2605 standard is available " (116) jamb depth for 2 x 4 wall construction. All shapes are available direct-set. Rectangle, arch and half circle are also available sash-set to match door stiles. Shapes Available in a wide variety of shapes including rectangle, arch, half circle, elliptical and Springline windows. See page 192 for exterior colors, interior wood species, glass and other options. Rectangle Arch Half Circle Direct-Set Sash-Set Andersen entry doors and entry door transoms may be combined using joining materials or can be installed in separate rough openings for a joined appearance. They may also be combined with other units. Contact your Andersen supplier for more information. Direct-Set Rectangular Entry Transom Dimensions and Specifications Transom Sidelight Dimensions Min. Rough Opening Overall Sidelight AETD / 16" (252) / 16" (325) 10 7 / 16" (265) 13 5 / 16" (338) 0.47 (0.04) 0.88 (0.08) AETD /16" (405) /16" (325) 16 7 /16" (418) 13 5 /16" (338) 0.88 (0.08) 1.42 (0.13) AETD /16" (652) /16" (325) 26 3 /16" (665) 13 5 /16" (338) 1.55 (0.14) 2.29 (0.21) AETD / 16" (805) / 16" (325) 32 3 / 16" (818) 13 5 / 16" (338) 1.95 (0.18) 2.82 (0.26) AETD /16" (856) /16" (325) 34 3 /16" (868) 13 5 /16" (338) 2.09 (0.19) 3.00 (0.28) AETD /16" (957) /16" (325) 38 3 /16" (970) 13 5 /16" (338) 2.36 (0.22) 3.35 (0.31) AETD /16" (1110) /16" (325) 44 3 /16" (1122) 13 5 /16" (338) 2.77 (0.26) 3.89 (0.36) AETD / 4" (1289) / 16" (325) 51 1 / 4" (1302) 13 5 / 16" (338) 3.25 (0.30) 4.52 (0.42) AETD / 4" (1594) / 16" (325) 63 1 / 4" (1607) 13 5 / 16" (338) 4.07 (0.38) 5.58 (0.52) AETD /4" (1695) /16" (325) 67 1 /4" (1708) 13 5 /16" (338) 4.34 (0.40) 5.94 (0.55) AETD / 4" (1899) / 16" (325) 75 1 / 4" (1911) 13 5 / 16" (338) 4.89 (0.45) 6.65 (0.62) AETD /4" (2203) /16" (325) 87 1 /4" (2216) 13 5 /16" (338) 5.71 (0.53) 7.72 (0.72) AETD / 16" (252) / 16" (452) 10 7 / 16" (265) 18 5 / 16" (465) 0.71 (0.07) 1.23 (0.11) AETD / 16" (405) / 16" (452) 16 7 / 16" (418) 18 5 / 16" (465) 1.33 (0.12) 1.97 (0.18) AETD / 16" (652) / 16" (452) 26 3 / 16" (665) 18 5 / 16" (465) 2.33 (0.22) 3.18 (0.30) AETD /16" (805) /16" (452) 32 3 /16" (818) 18 5 /16" (465) 2.95 (0.27) 3.92 (0.36) AETD / 16" (856) / 16" (452) 34 3 / 16" (868) 18 5 / 16" (465) 3.16 (0.29) 4.17 (0.39) AETD / 16" (957) / 16" (452) 38 3 / 16" (970) 18 5 / 16" (465) 3.57 (0.33) 4.66 (0.43) AETD / 16" (1110) / 16" (452) 44 3 / 16" (1122) 18 5 / 16" (465) 4.19 (0.39) 5.40 (0.50) AETD /4" (1289) /16" (452) 51 1 /4" (1302) 18 5 /16" (465) 4.91 (0.46) 6.28 (0.58) AETD / 4" (1594) / 16" (452) 63 1 / 4" (1607) 18 5 / 16" (465) 6.15 (0.57) 7.76 (0.72) AETD / 4" (1695) / 16" (452) 67 1 / 4" (1708) 18 5 / 16" (465) 6.56 (0.61) 8.26 (0.77) AETD / 4" (1899) / 16" (452) 75 1 / 4" (1911) 18 5 / 16" (465) 7.38 (0.69) 9.25 (0.86) AETD / 4" (2203) / 16" (452) 87 1 / 4" (2216) 18 5 / 16" (465) 8.61 (0.80) (1.00) AETD / 16" (252) / 16" (554) 10 7 / 16" (265) 22 5 / 16" (567) 0.91 (0.08) 1.51 (0.14) AETD / 16" (405) / 16" (554) 16 7 / 16" (418) 22 5 / 16" (567) 1.69 (0.16) 2.41 (0.22) AETD /16" (652) /16" (554) 26 3 /16" (665) 22 5 /16" (567) 2.96 (0.27) 3.89 (0.36) AETD /16" (805) /16" (554) 32 3 /16" (818) 22 5 /16" (567) 3.75 (0.35) 4.80 (0.45) AETD / 16" (856) / 16" (554) 34 3 / 16" (868) 22 5 / 16" (567) 4.01 (0.37) 5.10 (0.47) AETD / 16" (957) / 16" (554) 38 3 / 16" (970) 22 5 / 16" (567) 4.53 (0.42) 5.71 (0.53) continued on next page Custom-size windows are available in 1 8" (3) increments. Direct-Set Rectangular Entry Transom Direct-set transoms (AETD) provide maximum unobstructed glass. Direct-set dimensions and specifications shown. Sash-Set Rectangular Entry Transoms Sash-set single (AETXXXX-1) and twin (AETXXXX-2) transoms are also available. Contact your Andersen supplier for dimensions and specifications. "Transom Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. 204

15 ENTRANCEWAYS Direct-Set Rectangular Entry Transom Dimensions and Specifications (continued) Sidelight Dimensions Min. Rough Opening Overall Transom Sidelight AETD /16" (1110) /16" (554) 44 3 /16" (1122) 22 5 /16" (567) 5.32 (0.49) 6.62 (0.61) AETD /4" (1289) /16" (554) 51 1 /4" (1302) 22 5 /16" (567) 6.24 (0.58) 7.69 (0.71) AETD / 4" (1594) / 16" (554) 63 1 / 4" (1607) 22 5 / 16" (567) 7.81 (0.73) 9.51 (0.88) AETD /4" (1695) /16" (554) 67 1 /4" (1708) 22 5 /16" (567) 8.33 (0.77) (0.94) AETD /4" (1899) /16" (554) 75 1 /4" (1911) 22 5 /16" (567) 9.37 (0.87) (1.05) AETD /4" (2203) /16" (554) 87 1 /4" (2216) 22 5 /16" (567) (1.02) (1.22) AETD / 16" (252) 30" (762) 10 7 / 16" (265) 30 1 / 2" (775) 1.30 (0.12) 2.07 (0.19) AETD /16" (405) 30" (762) 16 7 /16" (418) 30 1 /2" (775) 2.43 (0.23) 3.32 (0.31) AETD /16" (652) 30" (762) 26 3 /16" (665) 30 1 /2" (775) 4.25 (0.39) 5.35 (0.50) AETD / 16" (805) 30" (762) 32 3 / 16" (818) 30 1 / 2" (775) 5.38 (0.50) 6.60 (0.61) AETD /16" (856) 30" (762) 34 3 /16" (868) 30 1 /2" (775) 5.75 (0.53) 7.02 (0.65) AETD /16" (957) 30" (762) 38 3 /16" (970) 30 1 /2" (775) 6.50 (0.60) 7.85 (0.73) AETD / 16" (1110) 30" (762) 44 3 / 16" (1122) 30 1 / 2" (775) 7.63 (0.71) 9.10 (0.85) AETD / 4" (1289) 30" (762) 51 1 / 4" (1302) 30 1 / 2" (775) 8.95 (0.83) (0.98) AETD /4" (1594) 30" (762) 63 1 /4" (1607) 30 1 /2" (775) (1.04) (1.21) AETD / 4" (1695) 30" (762) 67 1 / 4" (1708) 30 1 / 2" (775) (1.11) (1.29) AETD / 4" (1899) 30" (762) 75 1 / 4" (1911) 30 1 / 2" (775) (1.25) (1.45) AETD /4" (2203) 30" (762) 87 1 /4" (2216) 30 1 /2" (775) (1.46) (1.68) AETD / 4" (1289) 32" (813) 51 1 / 4" (1302) 32 1 / 2" (826) 9.62 (0.89) (1.05) AETD /4" (1594) 32" (813) 63 1 /4" (1607) 32 1 /2" (826) (1.12) (1.30) AETD / 4" (1695) 32" (813) 67 1 / 4" (1708) 32 1 / 2" (826) (1.19) (1.38) AETD /4" (1899) 32" (813) 75 1 /4" (1911) 32 1 /2" (826) (1.34) (1.54) AETD /4" (2203) 32" (813) 87 1 /4" (2216) 32 1 /2" (826) (1.57) (1.79) AETD /4" (1289) 48" (1219) 51 1 /4" (1302) 48 1 /2" (1232) (1.39) (1.57) AETD / 4" (1594) 48" (1219) 63 1 / 4" (1607) 48 1 / 2" (1232) (1.73) (1.94) AETD / 4" (1695) 48" (1219) 67 1 / 4" (1708) 48 1 / 2" (1232) (1.85) (2.07) AETD /4" (1899) 48" (1219) 75 1 /4" (1911) 48 1 /2" (1232) (2.08) (2.32) AETD /4" (2203) 48" (1219) 87 1 /4" (2216) 48 1 /2" (1232) (2.43) (2.69) AETD /4" (1289) 60" (1524) 51 1 /4" (1302) 60 1 /2" (1537) (1.76) (1.96) AETD / 4" (1594) 60" (1524) 63 1 / 4" (1607) 60 1 / 2" (1537) (2.20) (2.43) AETD /4" (1695) 60" (1524) 67 1 /4" (1708) 60 1 /2" (1537) (2.34) (2.58) AETD / 4" (1899) 60" (1524) 75 1 / 4" (1911) 60 1 / 2" (1537) (2.64) (2.89) AETD /4" (2203) 60" (1524) 87 1 /4" (2216) 60 1 /2" (1537) (3.08) (3.36) Custom-size windows are available in 1 8" (3) increments. Direct-Set Rectangular Entry Transom Direct-set transoms (AETD) provide maximum unobstructed glass. Direct-set dimensions and specifications shown. Sash-Set Rectangular Entry Transoms Sash-set single (AETXXXX-1) and twin (AETXXXX-2) transoms are also available. Contact your Andersen supplier for dimensions and specifications. "Transom Dimension" always refers to outside frame to frame dimension. "Minimum Rough Opening" dimensions may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See pages for more details. Entry Entranceways Transoms Direct-Set Entry Transom Details (149) 5 7 8" " (116) Jamb Depth 13 16" (21) Jamb 1 4" (6) 11 16" (17) Interior Trim Stop Unit Dimension Min. Rough Opening Minimum Rough Opening Unit Dimension 0" Unit Dimension 1 1 2" Unobstructed 1 1 2" (38) (38) Curved Head 11 16" (17) 13 16" (21) Minimum Rough Opening Unit Dimension 0" Unit Dimension 1 1 2" Unobstructed 1 1 2" (38) (38) Curved Head 11 16" (17) 13 16" (21) Direct-Set Direct-Set over Inswing Entry Direct-Set over Outswing Entry 4 9 / 16" (116) jamb depth measurement is from backside of installation flange. Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen parts required to complete window and/or door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Dimensions in parentheses are in millimeters. Clad details shown, wood also available. Transoms are available in both 4 9 /16" (116) and 6 9 /16" (167) jamb depths. 205

16 ENTRY DOOR TRANSOMS Sash-Set Entry Transom Details 13 16" (21) (149) 5 7 8" " (116) Jamb Depth Jamb 1 4" (6) Varies to Match or Sidelight Stile Below Unit Dimension Min. Rough Opening Minimum Rough Opening Unit Dimension 0" Unit Dimension 3 1 8" Unobstructed " (79) (81) Curved Head 7 16" (11) 7 16" (11) 13 16" (21) Sash-Set Transom for Inswing Entry Sash-Set Transom over Inswing Entry (149) 5 7 8" " (116) Jamb Depth Jamb 1 4" (6) Varies to Match or Sidelight Stile Below Unit Dimension Min. Rough Opening Minimum Rough Opening Unit Dimension 0" Unit Dimension " Unobstructed " (81) (81) Curved Head " (81) " (81) Sash-Set Transom for Outswing Entry Sash-Set Transom over Outswing Entry 4 9 / 16" (116) jamb depth measurement is from backside of installation flange. Light-colored areas are parts included with window and/or door. Dark-colored areas are additional Andersen parts required to complete window and/or door assembly as shown. Rough openings may need to be increased to allow for use of building wraps, flashing, sill panning, brackets, fasteners or other items. See installation information on pages Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com. Dimensions in parentheses are in millimeters. Clad details shown, wood also available. Transoms are available in both 4 9 / 16" (116) and 6 9 / 16" (167) jamb depths. 206

17 COMMERCIAL OUTSWING ENTRY DOORS COMMERCIAL OUTSWING ENTRY ENTRANCEWAYS DOORS FEATURES A ACCESSORIES Sold Separately Frame Standard commercial entry door sizes include 6'-10" (2083), 7' " (2167) and 7'-11" (2413) heights. Also availableailable in custom sizes. Contact your Andersen supplier for details. Thick aluminum cladding fi nish. Standard cladding fi nish meets AAMA An optional finish that meets the AAMA 2605 standard d is available. Optional wood exteriors also available. C B Hardware Accepts standard commercial closer, panic bar, kick plate and hardware systems from most manufacturers " (121) intermediate rail can be added to facilitate mounting of exit hardware. Interior extension jambs available in 1 16" (1.5) increments between " (129) and 12" (305). D Sill 3'-1 5 /8" (956) Panel Standard offering is a 10" (254) bottom rail with 7 1 2" (191) top rail to conceal closure hardware. Optional 12" (305) bottom rail and custom width stiles are also available. Contact your Andersen supplier for details. Complies with accessibility requirements for commercial and residential applications. See page 208 for details. Commercial-grade ball-bearing hinges with a stainless steel look. High-Performance glass options include: Low-E4 tempered glass Low-E4 HeatLock tempered glass Low-E4 Sun tempered glass Low-E4 SmartSun tempered glass Low-E4 SmartSun HeatLock tempered glass Additional glass options are available. Contact your Andersen supplier. A removable translucent film helps shield the glass from damage during delivery and construction and simplifies finishing at the jobsite. Low-profile thermally broken mill-finished aluminum sill is standard. Bronze anodized finish is also available. Innovative dam design helps resist water infiltration. The sill can be extended to the interior for various wall conditions. For more information about glass, grilles and installation accessories, contact your Andersen supplier. Grilles Grilles are available in a variety of configurations and widths. Art Decorative insulated art glass designs are available. Entranceways EXTERIOR EXTERIOR / INTERIOR INTERIOR WOOD SPECIES (Additional species available) PAINTED OPTIONS White Canvas Sandtone Terratone Forest Green Dark Bronze Pine Maple Oak Alder White Birch Bark Primed (for paint) Dove Gray Prairie Grass Red Rock Cocoa Bean Black Cherry Mahogany * Vertical Grain Douglas Fir Dark Bronze Black Naturally occurring variations in grain, color and texture of wood make each door one-of-a-kind. All wood interiors are unfi nished unless a painted option is specifi ed. * Actual wood is Sapele, a non-endangered species of mahogany, grown in Africa, with color and characteristics similar to American mahoganies. Dimensions in parentheses are in millimeters. Printing limitations prevent exact duplication of colors and fi nishes. See your Andersen supplier for actual color and fi nish samples. 207