uni MPB Straight running

Transcription

1 87 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt is used in various food applications and offers various styles from closed and open surfaces to roller or rubber top. he belt is the preferred belt in the following industries/ applications: Meat applications (beef & pork) including deboning lines, fat/trim lines, cutting lines, offal lines, evisceration lines, ackaging lines and elevator/ incline conveyors oultry applications including cage dumper lines, deboning lines, fat/ trim lines, offal lines, grading lines, packaging lines and elevator/incline conveyors Fruit & vegetable applications including elevators, steam peeler lines, inspection tables, blanchers and packaging lines Seafood applications including bulk feeder, elevators, inspection tables, grading lines, glazing lines, cooling and freezing lines Snack food applications including fryer discharge and incline applications roduct features and operational benefits: Easy to clean Single ink belt (no brick lay) reducing downtime for cleaning with up to 70% Single ink belt reducing bacteria growth and eliminating knives sticking in belt seams Unique lockpin locking system Unique sprocket engagement Strong and thick product supports allowing load without breakage Stick and non stick surfaces allowing optimized product throughput

2 88 Selection Ø 50.8 (2.00 ) ø8 (0.31 ) C G* * * Indent: GE and E are 35.0 (1.38 ). atent atented Materials See page (2.6 ) Side Guards: 200 (7.9 ) 18% 20% 22% See pages 92 and 93 See page See page 16 RR RO Rubber op ype R4 Alternative Dimensional Sketches R S SS304 A6.6 E G A6.6 G Accessories 18% 20% 22% G GE E See page 95 See page 94 See page 95 RO Rubber op ype R4 Dimensions R S

3 89 Materials and Colors ype materials and colors pin materials and colors C OMDI OMDI EI E EI E G GE OMDI E EI E 18% OMDI EI E 20% EI E 22% EI E EI E Rubber op R4 OMDI + 01 A6.6 Materials and Colors for RO aselink ype materials and colors RO OMDI G pin materials and colors Roller materials and colors OMDI

4 90 ricklayed elt idths (See below for Single ink widths) On above belt width values, the belt width tolerance on standard materials is +0/0.4% at 23 C/73 F Single ink Single ink is available in the following standard widths: K275 (67.0 (2.64 )) K325 (83.8 (3.30 )) K600 (151.0 (5.94 )) K725 (184.0 (7.24 )) K1800 (452.0 (17.80 )) K2000 (503.0 (19.80 )) K2400 (603.0 (23.74 )) Single ink elt idths elt type and widths K (2.64 ) K (3.30 ) K (5.94 ) K (7.24 ) K (17.80 ) K (19.80 ) K (23.74 ) C 18% 20% 22% G GE E RO Rubber op

5 91 elt eights elt material in material OM E kg/m 2 lb/ft 2 kg/m 2 lb/ft 2 kg/m 2 C G GE E Rubber op % % % RO * For total belt weights add kg (0.024 lb) x no. of roller kits. lb/ft ermissible ensile Strength elt material OM E in material C 18% 20% 22% G/GE /E Rubber op RO /m lbf/ft /m lbf/ft /m lbf/ft Max. oad per Roller Max. permissible static load Max. permissible dynamic load (accumulation) lbf lbf RO

6 92 Sprockets o. of teeth itch diameter Overall diameter ub diameter ore Reference no. 183A6M A6M I150S 183A6M06111G00M040S 183A6M08111G A6M08111G00I150S 183A6M M040S sq 50.8 sq A6M I200S 183A6M A6M I150S 183A6M10111G00M040S ø40.0/70.0* ø1.57/2.76* 183A6M10111G sq 50.8 sq 63.5 sq 2.00 sq A6M I200S 183A6M I250S 183A6M10111G00M060S 183A6M12111G02 183A6M I150S ø40.0/70.0* 1.57/2.76* 183A6M M040S 183A6M sq 50.8 sq A6M I200S 183A6M M060S ø40.0/70.0* 1.57/2.76* 183A6M A6M * Minimum/maximum round bore. lacement of earstrips and Sprockets o. of teeth Minimum dimension earstrip distance A A idth of sprockets: 42.3 (1.67 ) ooth width: 9.5 (0.37 ) material: A6 Other sprocket are available upon request. wopart sprockets are available upon request. lease note, if travel is in both directions, an extra set of sprockets is required. Alternatively use bidirectional options. (See next page.) Max. oad per Sprocket elt material OM with snub roller without snub roller lbf

7 93 idirectional Sprockets o. of teeth itch diameter Overall diameter ub diameter ore Reference no. 183A6M ) 183A6M I150S ø40.0/70* ø1.57/2.76* 183A6M10221G00M040S 183A6M ) A6M M060S sq 63.5 sq A6M I250S ) A6M M060S ) A6M12221G01M060S sq 90.0 sq A6M12221G01M090S ) ) 6.14 sq sq 90.0 sq sq ) 183A6M M090S 183A6M16221G01M060S** 183A6M16221G01M090S** * Minimum/maximum round bore. * ** Other sprocket sizes are available upon request. wopart sprockets are available upon request. idth of sprockets: 1) 42.3 (1.67 ) 2) 50.0 (1.97 ) material: A6 idth of sprockets: 50.0 (1.97 ) ooth width: 17.0 (0.67 ) material: A6

8 94 Accessories roduct Support Dimensional Sketches roduct Support Flat roduct Support ent roduct Support o Cling roduct Support Flat ent C C Drain roduct Support o Cling Drain 10% roduct Support Cupped roduct Support Micro roduct Support Cupped roduct Support Micro 20% roduct Support Micro 22% roduct Support molded Indent 34 (1.34 ) ote: For indent of 34 (1.34 ) avoid using or E lockpin, always use A6.6 lockpin or use an alternative pin retaining system. Depending on height and spacing A the use of product supports may influence the backflex radius. roduct Support Micro Micro 20% Micro 22% Materials, Colors and Dimensions Style roduct Support Flat roduct Support ent roduct Support o Cling roduct Support o Cling Drain roduct Support Cupped roduct Support Micro roduct Support Micro 20% roduct Support Micro 22% K ype OMD EI I K600 K600 idth materials & colors roduct Support molded indent 34 (1.34 )

9 95 Accessories ab Dimensions G J K K ote: hen using tabs, please verify sufficient clearance to the shaft. J G Max. shaft diameter = Sprocket pitch diameter 63.5 (2.50 ). hen using square shafts, please verify that the diagonal does not exceed max. diameter. Example: Sprocket z = 6: Max. shaft diameter = ø36 ( = ø1.4 ). ab Material and Color OMDI ote: hen using a belt system with tabs, the temperature should be constant. lease note that the tabs are not always placed in the middle of the belt. Accessories ab Dimensions E E A C A C D* E D D * 34.0 (1.34 ) combined with roduct Support. Increment: 8.4 (0.33 ). ote: Side Guards can not be positioned on top of G and cones. Side Guard Materials, Colors and Dimensions eight materials & colors EI I ote: ackflex radius when side guards are used: 200 (7.9 ).