444k/524k/544k/ 624k/644k LOADERS kw ( net hp)

Transcription

1 444k/524k/544k/ 624k/644k ODRS kw ( net hp)

2 -Series Specifications et Peak Power 92 kw (124 hp) 105 kw (141 hp) 121 kw (163 hp) 139 kw (186 hp) 173 kw (232 hp) / 171 kw (229 hp) ybrid ucket Capacity 1.9 m 3 (2.5 cu. yd.) 2.1 m 3 (2.75 cu. yd.) 2.3 m 3 (3.0 cu. yd.) 2.7 m 3 (3.5 cu. yd.) 3.2 m 3 (4.25 cu. yd.) Z-ar: Tipping oad (40-deg. full turn) 8047 kg (17,741 lb.) 8914 kg (19,652 lb.) 9428 kg (20,784 lb.) kg (26,409 lb.) kg (28,393 lb.) reakout orce 7970 kg (17,570 lb.) 9193 kg (20,267 lb.) kg (22,289 lb.) kg (28,266 lb.) kg (33,903 lb.) Operating Weight kg (24,698 lb.) kg (27,445 lb.) kg (28,660 lb.) kg (34,134 lb.) kg (40,417 lb.) Powerllel : Tipping oad (40-deg. full turn) 6260 kg (13,800 lb.) / 7607 kg (16,771 lb.) 9348 kg (20,609 lb.) kg (24,364 lb.) reakout orce 6056 kg (13,352 lb.) / 8604 kg (18,968 lb.) kg (23,719 lb.) kg (26,519 lb.) Operating Weight kg (27,155 lb.) / kg (31,007 lb.) kg (37,268 lb.) kg (44,017 lb.) Tool Carrier: Tipping oad (40-deg. full turn) / / / kg (24,426 lb.) / reakout orce / / / kg (24,202 lb.) / Operating Weight / / / kg (34,956 lb.) /

3 ngine 624 Z-R / -T / POWR / TOO CRRR anufacturer and odel ohn Deere PowerTech PVX 6068 ohn Deere PowerTech Plus 6068 ohn Deere PowerTech 6068 on-road mission Standard P nterim Tier 4/U Stage P Tier 3/U Stage P Tier 2/U Stage Cylinders Valves Per Cylinder Displacement 6.8 (414 cu. in.) 6.8 (414 cu. in.) 6.8 (414 cu. in.) et Peak Power (SO 9249) 139 kw (186 hp) at 1,800 rpm 147 kw (198 hp) at 1,800 rpm 147 kw (198 hp) at 1,800 rpm et Peak Torque (SO 9249) 826 m (609 lb.-ft.) at 1,300 rpm 836 m (617 lb.-ft.) at 1,600 rpm 836 m (617 lb.-ft.) at 1,600 rpm et Torque Rise 57% 65% 65% uel System (electronically controlled) igh-pressure common rail igh-pressure common rail igh-pressure common rail ubrication ull-ơow spin-on Ɵlter and integral cooler ull-ơow spin-on Ɵlter and integral cooler ull-ơow spin-on Ɵlter and integral cooler spiration Turbocharged, charge air cooled Turbocharged, charge air cooled Turbocharged, charge air cooled ir Cleaner Under-hood, dual-element dry type, restriction indicator in cab monitor for service Under-hood, dual-element dry type, restriction indicator in cab monitor for service Under-hood, dual-element dry type, restriction indicator in cab monitor for service an Drive ydraulically driven, proportionally controlled, fan aft of coolers ydraulically driven, proportionally controlled, fan aft of coolers ydraulically driven, proportionally controlled, fan aft of coolers lectrical System 24 volt with 100-amp (130-amp optional) alternator 24 volt with 80-amp (100-amp optional) alternator 24 volt with 80-amp (100-amp optional) alternator atteries (2 12 volt) 950 CC (each) 950 CC (each) 950 CC (each) Transmission System Type Countershaft-type PowerShift Torque Converter Single stage, single phase Shift Control lectronically modulated, adaptive, load and speed dependent Operator nterface Steering-column or joystick-mounted --R and gear-select lever; quick-shift button on hydraulic lever Shift odes anual/auto (1st D or 2nd D); quick-shift button with 2 selectable modes: kick-down or kick-up/down; and 3 adjustable clutch-cutoff settings aximum Travel Speeds (with 20.5 R 25 tires) orward Reverse Range km/h (4.7 mph) 7.6 km/h (4.7 mph) Range km/h (7.8 mph) 13.0 km/h (8.1 mph) Range km/h (15.5 mph) 25.7 km/h (16.0 mph) Range km/h (24.5 mph) / xles/rakes inal Drives eavy-duty inboard-mounted planetary Differentials ydraulic locking front with conventional rear standard; dual locking front and rear optional Rear xle Oscillation, Stop to Stop (with 20.5 R 25 tires) 24 deg. (12 deg. each direction) Service rakes (conform to SO 3450) ydraulically actuated, inboard sun-shaft mounted, oil cooled, self-adjusting, single disc Parking rakes (conform to SO 3450) utomatic spring applied, hydraulically released, driveline mounted, oil cooled, multi disc Tires/Wheels (see page 40 for complete tire adjustments) Tread Width Width Over Tires ichelin 20.5 R 25, 1 Star mm (80.7 in.) 2657 mm (104.6 in.) Serviceability ReƟll Capacities P T4/U Stage P Tier 3/U Stage P Tier 2/U Stage uel Tank (with ground-level fueling) 352 (93 gal.) 352 (93 gal.) 352 (93 gal.) Cooling System 34 (36 qt.) 27 (29 qt.) 27 (29 qt.) ngine Oil with Vertical Spin-On ilter 20 (21 qt.) 19 (20 qt.) 19 (20 qt.) Transmission luid with Vertical ilter 22 (23 qt.) 22 (23 qt.) 22 (23 qt.) xle Oil ront 22 (23 qt.) 22 (23 qt.) 22 (23 qt.) Rear 17 (18 qt.) 17 (18 qt.) 17 (18 qt.) ydraulic Reservoir and ilter 102 (27 gal.) 110 (29 gal.) 110 (29 gal.) Park rake Oil (wet disc) 0.3 (10 oz.) 0.3 (10 oz.) 0.3 (10 oz.) ydraulic System/Steering Pump (loader and steering) Variable-displacement, axial-piston pump; closed-center, pressure-compensating system aximum Rated low at 6895 kpa (1,000 psi) and 223 /m (59 gpm) 2,350 rpm System Relief Pressure (loader and steering) kpa (3,675 psi) oader Controls 2-function valve; joystick control or Ɵngertip controls; hydraulic-function enable/disable; optional 3rd- and 4th-function valve with auxiliary lever Steering (conforms to SO 5010) Type Power, fully hydraulic rticulation ngle 80-deg. arc (40 deg. each direction) Turning Radius (measured to centerline of outside tire) 5.27 m (17 ft. 4 in.)

4 ydraulic System/Steering (continued) 624 Z-R / -T / POWR / TOO CRRR ydraulic Cycle Times Z-ar igh-ift Powerllel Tool Carrier Raise 5.9 sec. 5.9 sec. 5.9 sec. 5.6 sec. Dump 1.3 sec. 1.3 sec. 1.4 sec. 3.0 sec. ower (Ơoat down) 2.7 sec. 2.7 sec. 2.8 sec. 2.7 sec. Total 9.9 sec. 9.9 sec sec sec. Dimensions and SpeciƟcations with Pin-On ucket D C 624 Z-R D -T ODRS WT P-O UCT Z-ar igh-ift Dimensions with ucket 2.7-m 3 (3.5 cu. yd.) general-purpose with bolt-on edge 2.7-m 3 (3.5 cu. yd.) general-purpose with bolt-on edge eight to Top of 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) ood eight 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) C round Clearance 384 mm (15.1 in.) 384 mm (15.1 in.) D ength from Centerline to ront xle 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) Wheelbase 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) Overall ength, ucket on round 7.76 m (25 ft. 5 in.) 8.17 m (26 ft. 9 in.) eight to inge Pin, ully Raised 3.95 m (13 ft. 0 in.) 4.30 m (14 ft. 2 in.) Dump Clearance, 45 deg., ull eight 2.86 m (9 ft. 5 in.) 3.23 m (10 ft. 7 in.) Reach, 45-deg. Dump, ull eight 1.02 m (3 ft. 4 in.) 1.11 m (3 ft. 8 in.) Reach, 45-deg. Dump, 2.13-m (7 ft. 0 in.) Clearance 1.57 m (5 ft. 2 in.) 1.93 m (6 ft. 4 in.) aximum Digging Depth 95 mm (3.8 in.) 203 mm (8.0 in.) aximum Rollback at round evel 37 deg. 36 deg. aximum Rollback, oom ully Raised 50 deg. 49 deg. aximum ucket Dump ngle, ully Raised 45 deg. 46 deg. oader Clearance Circle, ucket Carry Position m (40 ft. 2 in.) m (41 ft. 4 in.) SpeciƟcations with ucket Capacity, eaped 2.7 m 3 (3.5 cu. yd.) 2.7 m 3 (3.5 cu. yd.) Capacity, Struck 2.3 m 3 (3.0 cu. yd.) 2.3 m 3 (3.0 cu. yd.) ucket Weight with olt-on Cutting dge 1148 kg (2,532 lb.) 1148 kg (2,532 lb.) ucket Width 2.69 m (8 ft. 10 in.) 2.69 m (8 ft. 10 in.) reakout orce kg (28,266 lb.) kg (25,709 lb.) Tipping oad, Straight kg (30,473 lb.) kg (25,582 lb.) Tipping oad, 40-deg. ull Turn kg (26,409 lb.) kg (22,090 lb.) Rated Operating oad, 50% ull-turn Tipping oad kg (13,206 lb.) 5010 kg (11,045 lb.) (conforms to SO )* Operating Weight kg (34,134 lb.) kg (34,566 lb.) oader operating information is based on machine with identiɵed linkage and standard equipment, PowerTech PVX 6068 (P nterim Tier 4/U Stage ) engine, ROPS cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator. This information is affected by changes in tires, ballast, and different attachments, and assumes no tire deơection per the standard SO section 5. *Rated operating capacity based on Deere attachments only.

5 Dimensions and SpeciƟcations with i-vis Coupler and ook-on ucket 624 Z-R / -T / POWR / TOO CRRR D C 624 Z-R D -T ODRS WT QUC-COUPR D OO-O UCT D 624 POWR ODR WT QUC-COUPR D OO-O UCT C D C 624 TOO CRRR ODR WT QUC-COUPR D OO-O UCT Z-ar igh-ift Powerllel Tool Carrier Dimensions with ucket 2.7-m 3 (3.5 cu. yd.) generalpurpose with bolt-on edge 2.7-m 3 (3.5 cu. yd.) generalpurpose with bolt-on edge 2.7-m 3 (3.5 cu. yd.) generalpurpose with bolt-on edge 2.7-m 3 (3.5 cu. yd.) generalpurpose with bolt-on edge eight to Top of 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) ood eight 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) C round Clearance 384 mm (15.1 in.) 384 mm (15.1 in.) 384 mm (15.1 in.) 384 mm (15.1 in.) D ength from Centerline to ront xle 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) Wheelbase 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) Overall ength, ucket on round 7.98 m (26 ft. 2 in.) 8.39 m (27 ft. 6 in.) 8.13 m (26 ft. 8 in.) 7.95 m (26 ft. 1 in.) eight to inge Pin, ully Raised 3.96 m (13 ft. 0 in.) 4.32 m (14 ft. 2 in.) 3.99 m (13 ft. 1 in.) 3.99 m (13 ft. 1 in.) Dump Clearance, 45 deg., ull eight 2.69 m (8 ft. 10 in.) 3.06 m (10 ft. 1 in.) 2.70 m (8 ft. 10 in.) 2.81 m (9 ft. 3 in.) Reach, 45-deg. Dump, ull eight 1.11 m (3 ft. 8 in.) 1.20 m (3 ft. 11 in.) 1.28 m (4 ft. 2 in.) 1.45 m (4 ft. 9 in.) Reach, 45-deg. Dump, 2.13-m 1.56 m (5 ft. 2 in.) 1.94 m (6 ft. 4 in.) 1.75 m (5 ft. 9 in.) 1.85 m (6 ft. 1 in.) (7 ft. 0 in.) Clearance aximum Digging Depth 165 mm (6.5 in.) 262 mm (10.3 in.) 119 mm (4.7 in.) 102 mm (4.0 in.) aximum Rollback at round evel 39 deg. 39 deg. 42 deg. 49 deg. aximum Rollback, oom ully Raised 55 deg. 48 deg. 52 deg. 64 deg. aximum ucket Dump ngle, ully Raised 45 deg. 42 deg. 46 deg. 43 deg. oader Clearance Circle, ucket Carry m (40 ft. 7 in.) m (41 ft. 11 in.) m (41 ft. 4 in.) m (40 ft. 3 in.) Position SpeciƟcations with ucket Capacity, eaped 2.7 m 3 (3.5 cu. yd.) 2.7 m 3 (3.5 cu. yd.) 2.7 m 3 (3.5 cu. yd.) 2.7 m 3 (3.5 cu. yd.) Capacity, Struck 2.3 m 3 (3.0 cu. yd.) 2.3 m 3 (3.0 cu. yd.) 2.3 m 3 (3.0 cu. yd.) 2.3 m 3 (3.0 cu. yd.) ucket Weight with olt-on 1532 kg (3,378 lb.) 1532 kg (3,378 lb.) 1562 kg (3,444 lb.) 1077 kg (2,375 lb.) Cutting dge ucket Width 2.69 m (8 ft. 10 in.) 2.69 m (8 ft. 10 in.) 2.69 m (8 ft. 10 in.) 2.69 m (8 ft. 10 in.) reakout orce kg (24,214 lb.) 9998 kg (22,042 lb.) kg (23,719 lb.) kg (24,202 lb.) Tipping oad, Straight kg (27,279 lb.) kg (22,997 lb.) kg (23,980 lb.) kg (28,236 lb.) Tipping oad, 40-deg. ull Turn kg (23,521 lb.) 8952 kg (19,737 lb.) 9348 kg (20,609 lb.) kg (24,426 lb.) Rated Operating oad, 50% ull kg (11,761 lb.) 4476 kg (9,868 lb.) 4674 kg (10,304 lb.) 5540 kg (12,213 lb.) Turn Tipping oad (conforms to SO )* Operating Weight kg (35,025 lb.) kg (35,458 lb.) kg (37,268 lb.) kg (34,956 lb.) oader operating information is based on machine with identiɵed linkage and standard equipment, PowerTech PVX 6068 (P nterim Tier 4/U Stage ) engine, ROPS cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator. This information is affected by changes in tires, ballast, and different attachments, and assumes no tire deơection per the standard SO section 5. *Rated operating capacity based on Deere attachments only.

6 Dimensions and SpeciƟcations with i-vis Coupler and Construction orks O 624 Z-R / -T / POWR / TOO CRRR O D C 624 Z-R D -T ODRS WT QUC-COUPR D OO-O COSTRUCTO ORS D C 624 POWR ODR WT QUC-COUPR D OO-O COSTRUCTO ORS O 624 TOO CRRR ODR WT QUC-COUPR D OO-O COSTRUCTO ORS Z-ar Z-ar igh-ift igh-ift Powerllel Powerllel Tool Carrier Tool Carrier Dimensions with orks 1.22-m (48 in.) 1.52-m (60 in.) 1.22-m (48 in.) 1.52-m (60 in.) 1.22-m (48 in.) 1.52-m (60 in.) 1.22-m (48 in.) 1.52-m (60 in.) eight to Top of 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) 3.32 m (10 ft. 11 in.) ood eight 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) 2.46 m (8 ft. 1 in.) C round Clearance 384 mm (15.1 in.) 384 mm (15.1 in.) 384 mm (15.1 in.) 384 mm (15.1 in.) D ength from Centerline to 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) 1.52 m (5 ft. 0 in.) ront xle Wheelbase 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) 3.09 m (10 ft. 1 in.) Overall ength, orks on round 8.18 m (26 ft. 10 in.) 8.48 m (27 ft. 10 in.) 8.60 m (28 ft. 2 in.) 8.89 m (29 ft. 2 in.) 8.30 m (27 ft. 3 in.) 8.60 m (28 ft. 3 in.) 8.02 m (26 ft. 4 in.) 8.33 m (27 ft. 4 in.) eight to inge Pin, ully Raised 3.96 m (13 ft. 0 in.) 4.32 m (14 ft. 2 in.) 3.99 m (13 ft. 1 in.) 3.99 m (13 ft. 1 in.) Reach, ully Raised 0.75 m (29.5 in.) 0.84 m (33 in.) 0.92 m (36 in.) 0.89 m (35 in.) ork eight, ully Raised 3.73 m (12 ft. 3 in.) 4.09 m (13 ft. 5 in.) 3.76 m (12 ft. 4 in.) 3.91 m (12 ft. 10 in.) aximum Reach, ork evel 1.58 m (5 ft. 2 in.) 1.92 m (6 ft. 4 in.) 1.77 m (5 ft. 10 in.) 1.65 m (5 ft. 5 in.) ork eight, aximum Reach 1.77 m (5 ft. 10 in.) 1.77 m (5 ft. 10 in.) 1.84 m (6 ft. 1 in.) 1.99 m (6 ft. 7 in.) Reach, round evel 0.96 m (3 ft. 2 in.) 1.40 m (4 ft. 7 in.) 1.11 m (3 ft. 8 in.) 0.88 m (35 in.) Depth elow round 23 mm (0.9 in.) 123 mm (4.8 in.) 19 mm (0.8 in.) 0 mm (0 in.) Tine ength 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.) 1.22 m (48 in.) 1.52 m (60 in.) O oad Position, 50% Tine ength 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.) 0.61 m (24 in.) 0.76 m (30 in.) SpeciƟcations with orks Tipping oad, Straight 9633 kg (21,236 lb.) 9108 kg (20,080 lb.) 8556 kg (18,863 lb.) 8137 kg (17,938 lb.) 9029 kg (19,906 lb.) 8565 kg (18,883 lb.) 9774 kg (21,549 lb.) 9186 kg (20,251 lb.) Tipping oad, 40-deg. Turn 8340 kg (18,387 lb.) 7879 kg (17,371 lb.) 7380 kg (16,269 lb.) 7012 kg (15,458 lb.) 7799 kg (17,193 lb.) 7392 kg (16,297 lb.) 8496 kg (18,729 lb.) 7968 kg (17,566 lb.) Rated Operating oad, 50% ull- Turn Tipping oad (conforms to SO and S 1197)* 4170 kg (9,193 lb.) 3939 kg (8,685 lb.) 3690 kg (8,135 lb.) 3506 kg (7,729 lb.) 3900 kg (8,597 lb.) 3696 kg (8,148 lb.) 4248 kg (9,365 lb.) 3984 kg (8,783 lb.) Rated Operating oad, Rough Terrain, 60% ull-turn Tipping oad (conforms to 474-3)* Rated Operating oad, irm and evel round, 80% ull- Turn Tipping oad (conforms to 474-3)* Operating Weight 5004 kg (11,032 lb.) 6672 kg (14,709 lb.) 4727 kg (10,422 lb.) 6303 kg (13,896 lb.) 4428 kg (9,762 lb.) 5904 kg (13,016 lb.) 4207 kg (9,275 lb.) 5610 kg (12,367 lb.) 4679 kg (10,316 lb.) 6239 kg (13,755 lb.) 4435 kg (9,778 lb.) 5914 kg (13,037 lb.) 5158 kg (11,371 lb.) 6877 kg (15,161 lb.) 4781 kg (10,540 lb.) 6374 kg (14,053 lb.) kg (34,407 lb.) kg (34,502 lb.) kg (34,797 lb.) kg (33,982 lb.) kg (36,460 lb.) kg (36,554 lb.) kg (34,147 lb.) kg (34,242 lb.) oader operating information is based on machine with identiɵed linkage and standard equipment, PowerTech PVX 6068 (P nterim Tier 4/U Stage ) engine, ROPS cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator. This information is affected by changes in tires, ballast, and different attachments, and assumes no tire deơection per the standard SO section 5. *Rated operating capacity based on Deere attachments only. D C

7 djustments to Operating Weights and Tipping oads with uckets 624 Z-R / -T / POWR / TOO CRRR djustments to operating weights, tipping loads, and tires are based on Z-bar machine with pin-on 2.7-m 3 (3.5 cu. yd.) general-purpose bucket with bolt-on cutting edge, ROPS cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator* dd (+) or deduct ( ) kg (lb.) as indicated for loaders with 3-piece rims Operating Weight Tipping oad, Straight Tipping oad, 40- deg. ull Turn S Tread Width Width Over Tires Vertical eight ohn Deere PowerTech PVX kg (0 lb.) 0 kg (0 lb.) 0 kg (0 lb.) / / / ohn Deere PowerTech Plus kg ( 90 lb.) +119 kg (+262 lb.) +84 kg (+185 lb.) / / / ohn Deere PowerTech kg ( 148 lb.) +74 kg (+163 lb.) +39 kg (+86 lb.) / / / ichelin 20.5 R 25, 1 Star -3 0 kg (0 lb.) 0 kg (0 lb.) 0 kg (0 lb.) 0 mm (0 in.) 0 mm (0 in.) 0 mm (0 in.) ridgestone 20.5 R 25, 1 Star kg (+97 lb.) +33 kg (+73 lb.) +29 kg (+64 lb.) 0 mm (0 in.) 16 mm ( 0.6 in.) 0 mm (0 in.) Titan 20.5 R 25, 1 Star -3 4 kg ( 9 lb.) 3 kg ( 7 lb.) 3 kg ( 7 lb.) 0 mm (0 in.) 16 mm ( 0.6 in.) 0 mm (0 in.) ichelin 20.5 R 25, 1 Star kg ( 379 lb.) 129 kg ( 285 lb.) 114 kg ( 251 lb.) 0 mm (0 in.) 16 mm ( 0.6 in.) 3 mm ( 0.1 in.) ridgestone 20.5 R 25, 1 Star kg ( 176 lb.) 60 kg ( 132 lb.) 53 kg ( 117 lb.) 0 mm (0 in.) 16 mm ( 0.6 in.) 3 mm ( 0.1 in.) Titan 20.5 R 25, 1 Star kg ( 282 lb.) 96 kg ( 212 lb.) 85 kg ( 187 lb.) 0 mm (0 in.) 16 mm ( 0.6 in.) 3 mm ( 0.1 in.) irestone , 16 PR kg ( 556 lb.) 189 kg ( 417 lb.) 167 kg ( 367 lb.) 0 mm (0 in.) 12 mm ( 0.5 in.) +13 mm (+0.5 in.) Titan , 16 PR kg ( 573 lb.) +195 kg (+430 lb.) 172 kg ( 379 lb.) 0 mm (0 in.) 12 mm ( 0.5 in.) +6 mm (+0.2 in.) irestone , 16 PR kg ( 617 lb.) 210 kg ( 464 lb.) 185 kg ( 408 lb.) 0 mm (0 in.) 12 mm ( 0.5 in.) +6 mm (+0.2 in.) 725/ Ply -4T (ogger Style) ß +460 kg (+1,014 lb.) +333 kg (+735 lb.) +294 kg (+647 lb.) 0 mm (0 in.) +145 mm (+5.7 in.) +106 mm (+4.2 in.) ichelin 600/65 R 25, 1 Star -3T ßß +4 kg (+9 lb.) +3 kg (+7 lb.) +3 kg (+6 lb.) 0 mm (0 in.) +83 mm (+3.3 in.) 24 mm ( 0.9 in.) CaCl 2 in , -3 Rear Tires, 75% ill kg (+2,571 lb.) kg (+3,157 lb.) kg (+2,878 lb.) / / / *ay change based on vehicle conɵguration, weight, or tire-pressure adjustments. quipped with 5-piece heavy-duty rims. ß Requires 8-deg. rear axle stops. ß CaCl 2 not recommended. ucket Selection uides* UCT SZ m 3 (cu. yd.) lb./cu. yd. 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000 7,500 kg/m (6.5) 4.6 (6.0) 4.2 (5.5) 3.8 (5.0) 3.4 (4.5) 3.0 (4.0) 2.7 (3.5) 2.3 (3.0) 1.9 (2.5) 1.5 (2.0) 1.1 (1.5) 0.8 (1.0) 624 Z-R / -T Conservative oad Deere 2.7-m 3 (3.5 cu. yd.) eneral-purpose ucket ormal oad aximum oad Z-R ODR WT P-O UCT OOS TRS Chips, pulpwood 288 Cinders (coal, ashes, clinkers) 673 Clay and gravel, dry 1602 Clay, compact, solid 1746 Clay, dry in lump loose 1009 Clay, excavated in water 1282 Coal, anthracite, broken, loose 865 Coal, bituminous, moderately wet 801 arth, common loam, dry 1218 arth, mud, packed 1843 ranite, broken 1538 ypsum 2275 imestone, coarse, sized 1570 imestone, mixed sizes 1682 imestone, pulverized or crushed 1362 Sand, damp Sand, dry 1762 Sand, voids, full of water Sandstone, quarried 1314 Shale, broken crushed 1362 Slag, furnace granulated 1955 Stone or gravel, 37.5 to 87.5-mm (1.5 to 3.5") size 1442 Stone or gravel, mm (3/4") size 1602 kg/m 3 lb./cu. yd ,134 2,943 1,701 2,160 1,458 1,350 2,052 3,105 2,592 3,834 2,646 2,835 2,970 2,214 3,294 2,430 * This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. The conservative load line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The maximum load condition on this guide is sometimes utilized when operating on firm ground and level surfaces. 40 UCT SZ m 3 (cu. yd.) 4.9 (6.5) 4.6 (6.0) 4.2 (5.5) 3.8 (5.0) 3.4 (4.5) 3.0 (4.0) 2.7 (3.5) 2.3 (3.0) 1.9 (2.5) 1.5 (2.0) 1.1 (1.5) 0.8 (1.0) 41 lb./cu. yd. kg/m 3 ormal oad Conservative oad Deere 2.7-m 3 (3.5 cu. yd.) eneral-purpose ucket aximum oad 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000 7, T ODR WT P-O UCT OOS TRS Chips, pulpwood 288 Cinders (coal, ashes, clinkers) 673 Clay and gravel, dry 1602 Clay, compact, solid 1746 Clay, dry in lump loose 1009 Clay, excavated in water 1282 Coal, anthracite, broken, loose 865 Coal, bituminous, moderately wet 801 arth, common loam, dry 1218 arth, mud, packed 1843 ranite, broken 1538 ypsum 2275 imestone, coarse, sized 1570 imestone, mixed sizes 1682 imestone, pulverized or crushed 1362 Sand, damp Sand, dry 1762 Sand, voids, full of water Sandstone, quarried 1314 Shale, broken crushed 1362 Slag, furnace granulated 1955 Stone or gravel, 37.5 to 87.5-mm (1.5 to 3.5") size 1442 Stone or gravel, mm (3/4") size 1602 kg/m 3 lb./cu. yd ,134 2,943 1,701 2,160 1,458 1,350 2,052 3,105 2,592 3,834 2,646 2,835 2,970 2,214 3,294 2,430 * This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. The conservative load line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The maximum load condition on this guide is sometimes utilized when operating on firm ground and level surfaces.

8 ucket Selection uides* (continued) UCT SZ m 3 (cu. yd.) lb./cu. yd. 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000 7,500 kg/m (6.5) 4.6 (6.0) 4.2 (5.5) 3.8 (5.0) 3.4 (4.5) 3.0 (4.0) 2.7 (3.5) 2.3 (3.0) 1.9 (2.5) 1.5 (2.0) 1.1 (1.5) 0.8 (1.0) 624 POWR / TOO CRRR Deere 2.7-m 3 (3.5 cu. yd.) eneral-purpose ucket Conservative oad ormal oad aximum oad POWR ODR WT QUC-COUPR D OO-O UCT OOS TRS Chips, pulpwood 288 Cinders (coal, ashes, clinkers) 673 Clay and gravel, dry 1602 Clay, compact, solid 1746 Clay, dry in lump loose 1009 Clay, excavated in water 1282 Coal, anthracite, broken, loose 865 Coal, bituminous, moderately wet 801 arth, common loam, dry 1218 arth, mud, packed 1843 ranite, broken 1538 ypsum 2275 imestone, coarse, sized 1570 imestone, mixed sizes 1682 imestone, pulverized or crushed 1362 Sand, damp Sand, dry 1762 Sand, voids, full of water Sandstone, quarried 1314 Shale, broken crushed 1362 Slag, furnace granulated 1955 Stone or gravel, 37.5 to 87.5-mm (1.5 to 3.5") size 1442 Stone or gravel, mm (3/4") size 1602 kg/m 3 lb./cu. yd ,134 2,943 1,701 2,160 1,458 1,350 2,052 3,105 2,592 3,834 2,646 2,835 2,970 2,214 3,294 2,430 * This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. The conservative load line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The maximum load condition on this guide is sometimes utilized when operating on firm ground and level surfaces. UCT SZ m 3 (cu. yd.) 4.9 (6.5) 4.6 (6.0) 4.2 (5.5) 3.8 (5.0) 3.4 (4.5) 3.0 (4.0) 2.7 (3.5) 2.3 (3.0) 1.9 (2.5) 1.5 (2.0) 1.1 (1.5) 0.8 (1.0) Conservative oad ormal oad Deere 2.7-m 3 (3.5 cu. yd.) eneral-purpose ucket aximum oad lb./cu. yd. 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000 7,500 kg/m TOO-CRRR ODR WT QUC-COUPR D OO-O UCT OOS TRS Chips, pulpwood 288 Cinders (coal, ashes, clinkers) 673 Clay and gravel, dry 1602 Clay, compact, solid 1746 Clay, dry in lump loose 1009 Clay, excavated in water 1282 Coal, anthracite, broken, loose 865 Coal, bituminous, moderately wet 801 arth, common loam, dry 1218 arth, mud, packed 1843 ranite, broken 1538 ypsum 2275 imestone, coarse, sized 1570 imestone, mixed sizes 1682 imestone, pulverized or crushed 1362 Sand, damp Sand, dry 1762 Sand, voids, full of water Sandstone, quarried 1314 Shale, broken crushed 1362 Slag, furnace granulated 1955 Stone or gravel, 37.5 to 87.5-mm (1.5 to 3.5") size 1442 Stone or gravel, mm (3/4") size 1602 kg/m 3 lb./cu. yd ,134 2,943 1,701 2,160 1,458 1,350 2,052 3,105 2,592 3,834 2,646 2,835 2,970 2,214 3,294 2,430 * This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. The conservative load line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The maximum load condition on this guide is sometimes utilized when operating on firm ground and level surfaces.

9 dditional equipment ey: l Standard s Optional or special See your ohn Deere dealer for further information ngine l l l l l Wet-sleeve cylinder liners l l l l s utomatic glow plugs for cold start* l l l l l Programmable auto-idle and auto shutdown l l l l l Selected idle adjustment from 900 1,250 rpm l l l l l Starter protection l l l l l utomatic turbo cool-down/shutdown timer l l l l l utomatic derating for exceeded system temperatures l l l l l Serpentine drive belt for automatic tensioner l l l l l Under-hood prescreened air intake ß l l l l l lectrical fuel-priming pump l l l l l Dual-stage fuel Ɵlter and water separator l l l l l 500-hour vertical spin-on oil Ɵlter l ngine-compartment light s s s s s Chrome exhaust stack s s s s utomatic ether starting aid (recommended for cold starts below 12 deg. C [10 deg. ]) ß s s s s s ngine-block heater (recommended for cold starts below 23 deg. C [ 10 deg. ]) s s s s s Centrifugal engine air pre-cleaner Powertrain l l l l l Programmable maximum high gear l l l l l Clutch calibration engaged from monitor l l l l l 2,000-hour vertical spin-on transmission Ɵlter l l l l l Transmission Ɵll tube and sight gauge l Transmission diagnostic ports l 5-speed transmission with lockup torque converter l l l l s 4-speed transmission with non-lockup torque converter s ybrid-electric transmission system s s s Rear axle disconnect l l l l l ront locking differential s s s s s Rear locking differential s s s s s utomatic differential lock l l l l l xle oil temperature sensing s s s s s Wheel-spin control Quad-Cool Cooling System l l l l l eavy-duty, trash-resistant radiator and high-ambient cooling package l l l l l 2-side access to all coolers l l l l l solated from engine compartment l l l l l ngine radiator l l l l l ntegral engine oil cooler l l l l l ydraulic oil cooler (oil to air) l l l l l Transmission oil cooler (oil to air) l l l l l Charge air cooler (air to air) l l l l l Coolant recovery tank l l l l l ntifreeze, 37 deg. C ( 34 deg. ) l l l l l Cool-on-demand swing-out fan l l l l l nclosed fan safety guard s s s s s utomatic reversing fan drive s s s s s xle and service-brake coolers s s s s s Corrosive-environment coolers ydraulics l l l l l utomatic return-to-dig bucket positioner l l l l n-cab adjustable automatic return-to-dig bucket positioner (Powerllel only) l l l l l n-cab adjustable automatic boom-height kickout/return to carry ydraulics (continued) l l l l l Reservoir with sight gauge and Ɵll strainer l l l l l ydraulic diagnostic ports l l l l l 4,000-hour in-tank Ɵlter l l l l l 2 function joystick with --R s s s s s 2 function joystick with steering column --R s s s s s 2 function 2-lever Ɵngertip controls and steering column --R s s s s s 3 function joystick with --R and 3rd-function auxiliary lever s s s s s 3 function joystick with steering column --R and 3rdfunction auxiliary lever s s s s s 3 function 3-lever Ɵngertip controls and steering column --R s s s s s 4 function 4-lever Ɵngertip controls and steering column --R s s s s s Ride control, automatic with monitor-adjustable speed settings s s s s s ydraulic control system for quick-coupler locking pins Steering Systems l l l l l Conventional steering wheel with spinner knob s s s s oystick steering (including conventional steering column) with gearshift, --R, and horn s s s s s Secondary steering lectrical l l l l l Solid-state electrical power-distribution system l l l l l ockable master electrical-disconnect switch l l l l l attery-terminal safety covers l l l l l y-pass start safety cover at starter l l l l l Pre-wired for beacon/strobe light l l l l l ights: alogen driving lights with guards (2) / ront (4) and rear (2) cab work lights / Turn signals and Ơashers / D stop- and taillights l l l l l Programmable courtesy lights l l l l l orn, electric l l l l l Reverse warning alarm l l l l l ulti-function/multi-language CD color monitor includes: Digital instruments nalog display (hydraulic oil temperature, engine coolant temperature, transmission oil temperature, and engine oil pressure) / Digital display (engine rpm, transmission gear/direction indicator, hour meter, fuel level, speedometer, odometer, and outside temperature) l l l l l ntegrated cycle counter with 5 categories l l l l l ndicator lights: Standard and selected options / mber caution and red stop l l l l l Operator-warning messages l l l l l uilt-in diagnostics: Diagnostic-code details / Sensor values / Calibrations / ndividual circuit tester s s s s s eavy-duty D turn signal and marker lights s s s s s lectrical corrosion-prevention package s s s s s //weather-band radio s s s s s //weather-band radio with CD player s s s s s 24- to 12-volt, 8-amp converter *vailable only on 444, 524, 544, and 624 P nterim Tier 4/U Stage engines, 624 and 644 P Tier 3/U Stage engines, and 624 P Tier 2/ U Stage engine. vailable only on P nterim Tier 4/U Stage engines. ß vailable only on 624 and 644 P Tier 2/U Stage engines. ß vailable only on P Tier 3/U Stage and P Tier 2/U Stage engines. et engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan at test conditions per SO o derating is required up to 3050-m (10,000 ft.) altitude. SpeciƟcations and design subject to change without notice. SpeciƟcations with the exception of bucket capacity are in accordance with all applicable SO standards. xcept where otherwise noted, these speciɵcations are based on units with applicable linkage and standard equipment, ROPS cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator.

10 dditional equipment ey: l Standard s Optional or special See your ohn Deere dealer for further information Operator s Station l l l l l with ROPS/OPS, isolation mounted s s s s l ROPS canopy rear window s s s s s Quiet Cab with heater s s s s s Quiet Cab with air conditioning/heater l l l l l eyless start with multiple security modes l l l l l Sealed-switch module with function indicators l l l l l Seat with backrest extension, deep foam, vinyl cover, and adjustable air suspension s s s s s Seat with backrest extension, deep foam, fabric cover, and adjustable air suspension s s s s s Premium seat with high-wide back and headrest extension, heated, leather/fabric cover, and adjustable air suspension l l l l l ydraulic controls integrated to seat l l l l l igh-visibility, bright-orange seat belt, 76 mm (3 in.), with retractor l l l l l Cup holders (2) l l l l l unch-box/cooler holder s s s s s Dome and reading light (included with Quiet Cab) s s s s s 12-volt power port l l l l l Rubber Ơoor mat l l l l l Tilt steering column l l l l l Operator s manual storage compartment l l l l l Outside (2) and inside (1) rearview mirrors l l l l l eft-side operator-station access l l l l l Slip-resistant steps and ergonomic handholds s s s s s Sun visor (Quiet Cab only) s s s s s Radio ready (Quiet Cab only) s s s s s Powered cab air pre-cleaner s s s s s arge heated outside mirrors s s s s s eacon bracket s s s s s Rear camera and radar object-detection system s s s s s mbedded payload scale s s s s s ire extinguisher oader inkage l l l l l Z-bar loader linkage s s s s s igh-ift Z-bar loader linkage s s s s Powerllel linkage for visibility and parallel-lift s Tool-carrier linkage for parallel-lift uckets and ttachments s s s s s ull line of Deere pin-on buckets s s s s Worksite Pro hydraulic coupler which accepts R-pattern attachments s s s s s i-vis hydraulic coupler which accepts uro-pattern attachments (Volvo) s s s s s ull line of Deere hook-on buckets and forks s s s s s olt-on fork frame guard Overall Vehicle l l l l l Dink Ultimate wireless communication system (available in speciɵc countries; see your dealer for details) l l l l everrease rear-axle oscillation l l l l l everrease steering-cylinder joints l l l l l ront and rear tie-downs l l l l l Rear cast bumper/counterweight with rear hitch and locking pin l l l l l rticulation locking bar l l l l l oader boom service locking bar l l l l l 40-deg. steering articulation to each side with rubbercushion stops on frame l l l l l Vandal protection with lockable engine enclosures, right counterweight storage, battery box, and Ɵller access for radiator/fuel/hydraulic transmission l l l l l Service steps and handholds l l l l l Storage compartment l l l l l uel-tank Ɵll strainer l l l l l eavy-duty fuel-tank guard l l l l l round-level fueling l l l l l Same-side ground-level daily servicing l 17.5R25 tires on 3-piece rims s l l l 20.5R25 tires on 3-piece rims l 23.5R25 tires on 3-piece rims s 23.5R25 tires on 5-piece rims s s s s Waste handler (Z-bar and igh-ift) s s s everrease linkage (Z-bar and igh-ift) s s s s l evel 1 sound package s s s s s evel 2 sound package s s s s l nvironmental drains and sample ports s s Quick Ơuid service (engine, transmission, hydraulic oils, and engine coolant) l l l l l enders, front s s s s s enders, full-coverage, front s s s s s enders, full-coverage, front and rear s s s s s Close-mounted steps s s s s s ess wheels and tires with 8-deg. axle stops s s s s s Rims less tires s s s s s Transmission side-frame guards s ast-fuel system s s s s s ottom guards, front frame and transmission s s s s s ift eyes s s s s s icense-plate bracket and light s orestry-application package (Powerllel only) s s s s s Special guarding for waste and forestry applications et engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan at test conditions per SO o derating is required up to 3050-m (10,000 ft.) altitude. SpeciƟcations and design subject to change without notice. SpeciƟcations with the exception of bucket capacity are in accordance with all applicable SO standards. xcept where otherwise noted, these speciɵcations are based on units with applicable linkage and standard equipment, ROPS cab, rear cast bumper/counterweight, transmission side-frame guards, bottom guards, standard tires, full fuel tank, and 79-kg (175 lb.) operator.

11 ucket Selection uides* (continued) UCT SZ m 3 (cu. yd.) 6.8 (9.0) 6.5 (8.5) 6.1 (8.0) 5.7 (7.5) 5.3 (7.0) 4.9 (6.5) 4.6 (6.0) 4.2 (5.5) 3.8 (5.0) 3.4 (4.5) 3.0 (4.0) 2.7 (3.5) 2.3 (3.0) 1.9 (2.5) 644 -T / POWR Deere 3.2-m 3 (4.25 cu. yd.) eneral-purpose ucket Conservative oad ormal oad aximum oad 1.1 (2.0) lb./cu. yd. 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000 7,500 kg/m T ODR WT P-O UCT OOS TRS Chips, pulpwood 288 Cinders (coal, ashes, clinkers) 673 Clay and gravel, dry 1602 Clay, compact, solid 1746 Clay, dry in lump loose 1009 Clay, excavated in water 1282 Coal, anthracite, broken, loose 865 Coal, bituminous, moderately wet 801 arth, common loam, dry 1218 arth, mud, packed 1843 ranite, broken 1538 ypsum 2275 imestone, coarse, sized 1570 imestone, mixed sizes 1682 imestone, pulverized or crushed 1362 Sand, damp Sand, dry 1762 Sand, voids, full of water Sandstone, quarried 1314 Shale, broken crushed 1362 Slag, furnace granulated 1955 Stone or gravel, 37.5 to 87.5-mm (1.5 to 3.5") size 1442 Stone or gravel, mm (3/4") size 1602 kg/m 3 lb./cu. yd ,134 2,943 1,701 2,160 1,458 1,350 2,052 3,105 2,592 3,834 2,646 2,835 2,970 2,214 3,294 2,430 * This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. The conservative load line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The maximum load condition on this guide is sometimes utilized when operating on firm ground and level surfaces. UCT SZ m 3 (cu. yd.) 6.8 (9.0) 6.5 (8.5) 6.1 (8.0) 5.7 (7.5) 5.3 (7.0) 4.9 (6.5) 4.6 (6.0) 4.2 (5.5) 3.8 (5.0) 3.4 (4.5) 3.0 (4.0) 2.7 (3.5) 2.3 (3.0) 1.9 (2.5) Conservative oad Deere 3.1-m 3 (4.0 cu. yd.) eneral-purpose ucket ormal oad aximum oad 1.1 (2.0) lb./cu. yd. 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 5,500 6,000 6,500 7,000 7,500 kg/m POWR ODR WT QUC-COUPR D OO-O UC T OOS TRS Chips, pulpwood 288 Cinders (coal, ashes, clinkers) 673 Clay and gravel, dry 1602 Clay, compact, solid 1746 Clay, dry in lump loose 1009 Clay, excavated in water 1282 Coal, anthracite, broken, loose 865 Coal, bituminous, moderately wet 801 arth, common loam, dry 1218 arth, mud, packed 1843 ranite, broken 1538 ypsum 2275 imestone, coarse, sized 1570 imestone, mixed sizes 1682 imestone, pulverized or crushed 1362 Sand, damp Sand, dry 1762 Sand, voids, full of water Sandstone, quarried 1314 Shale, broken crushed 1362 Slag, furnace granulated 1955 Stone or gravel, 37.5 to 87.5-mm (1.5 to 3.5") size 1442 Stone or gravel, mm (3/4") size 1602 kg/m 3 lb./cu. yd ,134 2,943 1,701 2,160 1,458 1,350 2,052 3,105 2,592 3,834 2,646 2,835 2,970 2,214 3,294 2,430 * This guide, representing bucket sizes not necessarily manufactured by Deere, will help you in selecting proper bucket size for material density, loader configuration, and operating conditions. Optimum bucket size is determined after adding or subtracting all tipping load changes due to optional equipment. The conservative load line on this guide is recommended when operating in conditions such as soft ground and unlevel surfaces. The maximum load condition on this guide is sometimes utilized when operating on firm ground and level surfaces.

12 DUDR itho in U.S.. (13-03)