Wheel Loader. Cummins Tier 2 engine: 271 hp (202 kw) buckets from 3.60 m 3 to 4.30 m 3 Breakout force: dan. Courtesy of Machine.

Transcription

1 Wheel Loader Cummins Tier 2 engine: 271 hp (202 kw) buckets from 3.60 m 3 to 4.30 m 3 Breakout force: dan C O M M I T T E D T O Y O U R N E E D S

2 Engine Make...Cummins Type...QSM11 Standard mode Max. Power gross SAE hp (216 kw) at 2100 rpm Max.Power Net EEC 80/ hp (202 kw) at 2100 rpm Max. Gross Torque Nm at 1400 rpm Max. Net torque Nm at 1400 rpm Economy mode Max. Power gross SAE hp (201 kw) at 2100 rpm Max.Power Net EEC 80/ hp (190 kw) at 2100 rpm Max. Gross Torque Nm at 1400 rpm Max. Net torque Nm at 1400 rpm Displacement L N of cylinders... 6 Bore and stroke x 147 mm Compression ratio to 1 Fuel injection system... Direct Oil filter... Spin-on cartridge Air filter (Dry-type)... 2 elements Tier 2 low emission engine designed to meet today s and futures environmental European standard. Electrical system Voltage volts Batteries...2 x 12 volts Alternator...70 A/h Power Train Torque converter Stall ratio : 1 Powershift gearbox Manufacturer... ZF ECM transmission State of the art transmission working with Electronic Control Module (ECM). This system provides smooth shifting and long life. The transmission can be programmed to operate automatically in a custom shift pattern, or simply choose automatic or manual mode. Axles Manufacturer... ZF Front axle... fixed Rear axle... Oscillating (+ -) 12 Torque proportional differentials on front and rear axles. Tyres Standard x 25 Brakes Hydraulically controlled oil-bath multi-disc brakes in sealed housing. Separate twin brake circuit for front and rear axles. Parking brakes Electric parking brake acting on a disc located on the transmission. A safety device automatically cuts out the transmission when the parking brake is in use. Steering Type... Hydrostatic Turning angle... (+/- 40 ) Pump...Vane type Flow l/mn Steering safety valve pressure setting bar Safety steering... standard Closed centre with Load Sensing regulation. Travel speeds 26.5 x 25 L3 tyres 1 st 2 nd 3 rd 4 th Forward (km/h) Reverse (km/h)

3 Hydraulic System One double body vane pump, attached to the gearbox, direct driven by the engine. Loader flow l/mn at 196 bar Steering flow l/mn at 196 bar Brake flow l/mn at 170 bar Open centre, three-spool, modular type, hydraulically assisted control valves with servo-assisted controls. Working pressure bar Double acting cylinders Arm (2) (ø rod x ø piston x Stroke) x 178 x 868 mm Bucket (1) (ø rod x ø piston x Stroke) x 203 x 745 mm Hydraulic oil tank sealed and pressurised. Cycle time Raising (full bucket) sec Lowering (bucket empty) sec Dumping sec Total sec Capacities Fuel tank l Hydraulic system l Gear box and torque converter l Engine and filter l Axle: Front differential...21 l Rear differential l Cooling system...42 l Noise level LwA = 110 db (A) LpA = 77 db (A) Range of Tools and Accessories Buckets : Wood grabs Without teeth V-shaped blade Pallet forks With teeth Light-weight materials Sweeper With blade High dump height Dozer blade For other tools or specific applications, please consult Case. MATERIAL DENSITY BUCKET CAPACITY TABLE Sand and gravel, wet Gravel, pit run C Sand and gravel, dry Materail density t/m C XR Clay, wet Earth, wet excavated Limestone, broken or crushed Clay and gravel, dry 1.30 Schiste Buckets m 3 with teeth or straight blade 3

4 921C 45 * 921C B 45 A 4.27 m E 921C 2.13 m 3.56 m ** 0.44 m 3.40 m 1.70 m D F Track: 2.21 m Width outside tyres: 2.59 m * ** { : 50 max 40 (ground level) 43 (travel) 4

5 BUCKET TYPE SAE heaped capacity m Struck capacity m Maximum density t/m Bucket width m Bucket weight kg A Dump clearance at 45 full height m B Bucket reach at 45 full height m C Bucket reach at m height m D Overall length m E Overall height m F Digging depth mm Turning radius c/w bucket m Breakout force dan Tipping load straight kg at 40 turn kg Operating weight kg Rock bucket All specifications and dimensions given above are based on unit fitted with 26.5 x 25 tyres, standard equipment, ROPS and FOBS cab, standard counterweight, operator and full tanks. The dimensions and specifications comply with the ISO 8313, 5998 & 7546 standards. 5

6 921C XR 45 * 3.56 m 921C XR 921C XR B m A 4.82 m E ** 0.44 m 3.40 m 1.70 m D F Track: 2.21 m Width outside tyres: 2.95 m * ** { : 45 max 40 (ground level) 45 (travel) 6

7 BUCKET TYPE SAE heaped capacity m Struck capacity m Maximum density t/m Bucket width m Bucket weight kg A Dump clearance at 45 full height m B Bucket reach at 45 full height m C Bucket reach at m height m D Overall length m E Overall height m F Digging depth mm Turning radius c/w bucket m Breakout force dan Tipping load straight kg at 40 turn kg Operating weight kg All specifications and dimensions given above are based on unit fitted with 26.5 x 25 tyres, standard equipment, ROPS and FOBS cab, standard counterweight, operator and full tanks. The dimensions and specifications comply with the ISO 8313, 5998 & 7546 standards. 7

8 Powered by TCPDF ( Standard Equipment Drivetrain Proportional-Shift Powershift gearbox Cold start protection (gearbox) Helical gears Proportional control valve Electrical/ hydraulic parking brake Transmission electronic control module Torque proportional differentials Cab Pressurised cab ROPS and FOPS type approved cab Public highway lighting system Radio pre-equipment Air-conditioning* Rotary light* Grab handles Ventilation - Heating - Defrosting (redesigned) Wider and taller tinted window glass Cab filter Door opening gas strut assisted Instrument panel with electronic monitoring system Digital Bar Gauges Engine 70 amp alternator Aneroid valve Hydraulics Denison vane pumps Bucket return-to-horizontal Automatic bucket return to transport position Steering Flow amplified steering Wide angle steering Emergency steering system Pilot Control Lock Closed center steering Equipment Front and rear windshield wiper Reverse travel audible warning Front and rear mudguards Hazard warning signal Front and rear working lights Light height pre-selection LH and RH rear-view mirrors Intermittent wipers Cup holder Towing eye Optional Equipment Radio and converter Spark arrestor Muffler 3rd hydraulic circuit Hydraulically controlled quick-hitch Air suspension seat with safety belt Ride control * Standard and optional equipment may vary from country to country Conforms to directive 98/37/CE NOTE: Standard and optional attachments and equipment may vary according to requirements and regulations from country to country. the photos given may show non standard or unmentioned items. Furthemore CNH France S.A. reserves its right to modify specifications of its machines without prior warning, without incurring any obligation whatsoever that might result from such modifications. Case Construction Equipment 18, Place des Nymphéas ZI Paris Nord II Roissy CDG Cedex FRANCE Tel.: (33) Fax: (33) GB PRINTED IN ITALY 02/03 8