Pressure. PVC Schedule 80 Pipe and Fittings. PVC Schedule 40 Pipe and Fittings. FlowGuard Gold CPVC CTS Pipe and Fittings. ReUze CPVC CTS Pipe
|
|
- Theresa Park
- 5 years ago
- Views:
Transcription
1 MNONA CAAO PVC chedule 80 Pipe and Fittings Pressure PVC chedule 40 Pipe and Fittings Flowuard old CPVC C Pipe and Fittings ReUze CPVC C Pipe (Updated March, 20) Charlotte Pipe and Foundry Company C-PR
2 PRUR PP AN FN MNONA CAAO AB OF CONN Page Pipe ata - PVC chedule 80, Plain nd... Pipe ata - PVC chedule 80, Belled nd... 4 chedule 80 and chedule 40 apered ocket imensions... 5 American National tandard aper Pipe hreads... 5 PVC chedule 80 Fittings imensions and Weights Pipe ata - PVC chedule 40, Plain nd Pipe ata - PVC chedule 40, Belled nd Pipe ata - PVC Well Casing and R Pipe PVC chedule 40 Fittings imensions and Weights Pipe ata - Flowuard CPVC C R Flowuard old CPVC C Fitting imensions Pipe ata - ReUze CPVC C R Flowuard old CPVC C Fittings imensions and Weights Certification imited Warranty Flowuard old imited Warranty... 6 ReUze, Charlotte Pipe and You can t beat the system are registered trademarks of Charlotte Pipe and Foundry Company. Flowuard old is a registered trademark of he ubrizol Coporation.
3 Pipe ata PVC chedule 80 Pipe PVC chedule 80 Pipe, ype, rade - Plain nd PVC CHU 40 (WH) PAN N PVC 20 AM 2665 PVC CHU 80 (RAY) PAN N PVC 20 MAX WORK PAR NO. NOM. Z UPC # QY. PR AV. O MN. WA PRUR A W. PR K (N.) (N.) 2 C OR 7 F 00 F. (B.) PVC x P 0.0 PVC x P.8 PVC x P 20. PVC x P 27.5 PVC 000 x P 40.5 PVC x P 55.9 PVC x P 67.7 PVC x P 9.6 PVC x P 42.8 PVC 000 x P 9. PVC x P 279. PVC x P 52.7 PVC x P PVC x P 99. PVC x P 650. PVC x P 90.0 PVC x P P V C C H U 8 0 P P Note: Full pallets are polyethylene wrapped for cleanliness and UV protection. NF isted. Meets All Requirements of AM 784 and AM 785. MA U..A. N esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM 785.
4 Pipe ata PVC chedule 80 Pipe PVC chedule 80 Pipe, ype, rade - Belled nd PVC CHU 40 (WH) PAN N PVC 20 AM 2665 PVC CHU 80 (RAY) B-N PVC 20 MAX WORK PAR NO. NOM. Z UPC # QY. PR AV. O MN. WA PRUR A W. PR K (N.) (N.) 2 C OR 7 F 00 F. (B.) PVC 0005B 2 x P 20. PVC 0007B 4 x P 27.5 PVC 000B x P 40.5 PVC 002B 4 x P 55.9 PVC 005B 2 x P 67.7 PVC 0020B 2 x P 9.6 PVC 0025B 2 2 x P 42.8 PVC 000B x P 9. PVC 0040B 4 x P 279. PVC 0060B 6 x P 52.7 PVC 0080B 8 x P PVC 000B 0 x P 99. PVC 020B 2 x P 650. PVC 040B 4 x P 90.0 PVC 060B 6 x P Note: Full pallets are polyethylene wrapped for cleanliness and UV protection. NF isted. Meets All Requirements of AM 784 and AM 785. MA U..A. N esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM
5 chedule 80 Fittings chedule 80 and chedule 40 apered ocket imensions PVC CHU 80 - AM 2467 PVC CHU 40 - AM 2466 chedule 80 and chedule 40 ocket iameter chedule 80 chedule 40 Nominal ntrance Bottom olerance ocket ength ocket ength ize A B C (Minimum) C (Minimum) ± ± ± ± ± ± ± ± ± ± ± ± ± C H U 8 0 F N American National tandard aper Pipe hreads (NP) AN / AM B.20., AM 2464, AM F 498 ffective Nominal hread hreads Pitch of ize ength () Per nch hread (P)
6 chedule 80 Fittings = OCK, P = PO, MP = MA PP HRA, FP = FMA PP HRA A MNON AR N NCH. ORANC = (OCK NH) MNMUM = (AYN NH) NRCON OF CNR N O BOOM OF OCK/ HRA, 90 BOW,, CRO, ± /2 H = NRCON OF CNR N O FAC OF FN; 90 BOW,, CRO, ± /2 J = (AYN NH) NRCON OF CNR N O BOOM OF OCK/ HRA; 45 BOW, ± /2 = OVRA NH OF FN, (NCUN CAP), ± /6 M = OU AMR OF OCK/HRA HUB, ± /6 N = OCK/HRA BOOM O OCK/HRA BOOM; COUPN, ± /6 MNON AR UBJC O CHAN WHOU NOFCAON. ee x x PVC PAR NO Approx ize Part Number H Wt. (bs.)
7 chedule 80 Fittings Reducing ee x x PVC PAR NO Apprpx. ize Part Number H H Wt. (bs.) 4 x 4 x x x x x x 4 x x 2 x x 2 x x 2 x x 2 x x 2 x x 2 x x 2 x x x x 4x x 4x x 6 x x 6 x x8x C H U 8 0 F N 7
8 chedule 80 Fittings ee x x FP PVC PAR NO. 840 Apprpx. ize Part Number H H Wt. (bs.) ee FP x FP x FP PVC PAR NO ize Part Number H Wt. (bs.)
9 chedule 80 Fittings 90 egree lbow x PVC PAR NO. 800 ize Part Number H Wt. (bs.) C H U 8 0 F N 90 egree lbow x FP PVC PAR NO. 80 ize Part Number H H Wt. (bs.)
10 chedule 80 Fittings 90 egree lbow FP x FP PVC PAR NO. 802 ize Part Number H Wt. (bs.) egree lbow x PVC PAR NO. 809 ize Part Number H J Wt. (bs.)
11 chedule 80 Fittings 45 egree lbow FP x FP PVC PAR NO. 82 ize Part Number H J Wt. (bs.) C H U 8 0 F N Wye x x PVC PAR NO ize Part Number J H Wt. (bs.) 2* * * *Maximum pressure rating is 250 psi at 7 F.
12 chedule 80 Fittings Wye x x PVC PAR NO ize Part Number J H Wt. (bs) 4** ** **Maximum pressure rating is 50 psi at 7 F. Coupling x PVC PAR NO. 800 ize Part Number N Wt. (bs.)
13 chedule 80 Fittings Reducer Coupling x PVC PAR NO. 800 ize Part Number N Wt. (bs.) 4 x x x x x x x x x x x x C H U 8 0 F N Coupling FP x FP PVC PAR NO. 802 ize Part Number N Wt. (bs.)
14 chedule 80 Fittings Female Adapter x FP PVC PAR NO. 80 ize Part Number N Wt. (bs.) Male Adapter x MP PVC PAR NO. 809 ize Part Number N Wt. (bs.)
15 chedule 80 Fittings Reducer Bushing, Flush tyle P x PVC PAR NO. 807 ize Part Number N Wt. (bs.) 4 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x C H U 8 0 F N 5
16 chedule 80 Fittings Reducer Bushing, Flush tyle P x FP PVC PAR NO. 808 ize Part Number P N Wt. (bs.) 4 x x x x x x x x x x x x x x x x x
17 chedule 80 Fittings Reducer Bushing, Flush tyle MP x FP PVC PAR NO ize Part Number N Wt. (bs.) x x x x x x x x x x x x C H U 8 0 F N 7
18 chedule 80 Fittings Cap PVC PAR NO. 86 ize Part Number Wt. (bs.) Cap FP PVC PAR NO. 87 ize Part Number Wt. (bs.)
19 chedule 80 Fittings Plug MP PVC PAR NO. 8 ize Part Number Wt. (bs.) Flange, One Piece** PVC PAR NO C H U 8 0 F N ize Part Number N R BO CRC BO HO NO. OF BO BO MN. BO ize A. A. HO A. NH* Wt. (bs.) * BO NH WR CACUA UN WO CHARO FAN. NH MAY VARY WHN MAN WH OHR BRAN OR ACCOR. ** H MAXMUM WORKN PRUR 50 P A 7 F. 9
20 chedule 80 Fittings Flange, One Piece** FP PVC PAR NO ize Part Number N R BO BO NO. OF BO MN. BO ize CRC A. HO A. BO HO A. NH* Wt. (bs.) * BO NH WR CACUA UN WO CHARO FAN. NH MAY VARY WHN MAN WH OHR BRAN OR ACCOR. ** H MAXMUM WORKN PRUR 50 P A 7 F. 20
21 chedule 80 Fittings Blind Flange, One Piece** PVC PAR NO. 850 BO BO NO. OF MN. Part CRC HO BO BO BO Wt. ize Number R A. A. HO A. NH* (bs.) * BO NH WR CACUA UN WO CHARO FAN. NH MAY VARY WHN MAN WH OHR BRAN OR ACCOR. ** H MAXMUM WORKN PRUR 50 P A 7 F. C H U 8 0 F N 2
22 chedule 80 Fittings Van tone Flange** PVC PAR NO. 850 ize Part Number N R BO CRC BO HO NO. OF BO BO MN. BO ize A. A. HO A. NH* Wt. (bs.) * BO NH WR CACUA UN WO CHARO FAN. NH MAY VARY WHN MAN WH OHR BRAN OR ACCOR. ** H MAXMUM WORKN PRUR 50 P A 7 F. 22
23 chedule 80 Fittings Union, with Viton O-Ring eal* PVC PAR NO Union, with PM O-Ring eal* PVC PAR NO. 870 Part Number with Viton with PM ize O-Ring eal O-Ring eal N Wt. (bs.) * H MAXMUM WORKN PRUR 25 P A 7 F. Union, with Viton O-Ring eal* FP PVC PAR NO C H U 8 0 F N Union, with PM O-Ring eal* FP PVC PAR NO. 880 Part Number with Viton with PM ize O-Ring eal O-Ring eal N Wt. (bs.) ** * H MAXMUM WORKN PRUR 25 P A 7 F. ** H MAXMUM WORKN PRUR 200 P A 7 F. H MAXMUM WORKN PRUR 85 P A 7 F. 2
24 chedule 80 Fittings Union, with Viton O-Ring eal* x FP PVC PAR NO Union, with PM O-Ring eal* x FP PVC PAR NO. 880 Part Number with Viton with PM ize O-Ring eal O-Ring eal N Wt. (bs.) ** * H MAXMUM WORKN PRUR 25 P A 7 F. ** H MAXMUM WORKN PRUR 200 P A 7 F. H MAXMUM WORKN PRUR 85 P A 7 F
25 Pipe ata PVC chedule 40 Pipe PVC chedule 40 Pipe - Plain nd PVC CHU 40 (WH) PAN N N PVC PVC AM AM MAX WORK PAR NO. NOM. Z UPC # AV. O MN. WA PRUR W. PR (N.) (N.) A 2 C OR 7 F 00 F. (B.) PVC x P 5.9 PVC x P 5.9 PVC x P 2. PVC x P 2. PVC 400 x P. PVC 400 x P. PVC 700* 4 x P 42.4 PVC 700* 4 x P 42.4 PVC 72* 2 x P 50.7 PVC 72* 2 x P 50.7 PVC 7200* 2 x P 68. PVC 7200* 2 x P 68. PVC x P 08.0 PVC 700* x P 4.2 PVC 700* x P 4.2 PVC x P 20.2 PVC x P 20.2 PVC x P PVC x P 5.7 PVC x P 5.7 PVC x P 52. PVC x P 52. PVC x P PVC x P PVC x P 80. PVC x P 54. * ual Marked AM 785 & AM riple Marked AM 785 & AM 2665 & AM F 480. ual Marked AM 785 & AM F 480. NF isted. Meets All Requirements of AM 784 and AM 785. Note: When ordering, please specify plain end or bell end. MA U..A. N 25 esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM 785. P V C C H U 4 0 P P
26 Pipe ata PVC chedule 40 Pipe - Bell nd* PVC CHU 40 (WH) PAN N PVC 20 AM 2665 PVC CHU 40 (WH) B N PVC 20 AM 785 MAX WORK PAR NO. NOM. Z UPC # AV. O MN. WA PRUR A B PH W. PR (N.) (N.) 2 C OR 7 F (N.) 00 F. (B.) PVC 4005B** 2 x P PVC 4005B** 2 x P PVC 4007B** 4 x P PVC 4007B** 4 x P PVC 400B** x P PVC 400B** x P PVC 402B 4 x P PVC 402B 4 x P PVC 405B 2 x P PVC 405B 2 x P PVC 4020B 2 x P PVC 4020B 2 x P PVC 4025B 2 2 x P PVC 4025B 2 2 x P PVC 700B x P PVC 400B x P PVC 7400B 4 x P PVC 9400B 4 x P PVC 7600B 6 x P PVC 9600B 6 x P PVC 7800B 8 x P PVC 9800B 8 x P PVC 790B 0 x P PVC 792B 2 x P PVC 794B 4 x P PVC 796B 6 x P * Bell dimensions meet either AM 2672 or AM F 480, depending upon pipe diameter ** AM 785 ual Marked AM 785 & AM F 480 ual Marked AM 785 & AM 2665 riple Marked AM 785 & AM 2665 & AM F 480 MA U..A. N esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM
27 Pipe ata PVC Well Casing PVC CHU 40 (WH) B PAN N W N CAN PVC 20 PVC 20 AM F PAR NO. NOM. Z UPC # AV. O MN. WA B PH W. PR (N.) (N.) (N.) 00 F. (B.) PVC 4020B 2 x PVC 4025B 2 2 x PVC 400B x PVC 9400B 4 x PVC 9600B 6 x PVC 9800B 8 x PVC R Pipe PR PVC 200 CHU PVC 40 (WH) 20 B PAN N N AM PVC AM R MAX WORK PAR NO. NOM. Z UPC # AV. O MN. WA PRUR A B PH W. PR (N.) (N.) 2 C OR 7 F (N.) 00 F. (B.) PVC 255B * 2 x P PVC 20007B 4 x P PVC 20007B 4 x P PVC 2000B x P PVC 2002B 4 x P PVC 2005B 2 x P PVC 20020B 2 x P *PR 5 / R.5 PR PVC 60 CHU PVC 40 (WH) 20 B PAN N N AM PVC AM R 2665 MAX WORK PAR NO. NOM. Z UPC # AV. O MN. WA PRUR A B PH W. PR (N.) (N.) 2 C OR 7 F (N.) 00 F. (B.) PVC 602B 4 x P PVC 605B 2 x P PVC 6020B 2 x P PVC 600B x P Note: When ordering, please specify plain end or bell end. P V C W C A N & R P P MA U..A. N esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM
28 chedule 40 Fittings ee x x PVC PAR NO ize Part Number H Wt. (bs)
29 chedule 40 Fittings Reducing ee x x PVC PAR NO Apprpx. ize Part Number H H Wt. (bs.) 2 x 2 x x 2 x x 4 x x x x x x 4 x x 4 x x 2 x x 2 x x 2 x x 2 x x 2 x x 2 x x 2 x x x x 4 x x 4 x x 6 x C H U 4 0 F N 29
30 chedule 40 Fittings ee x x FP PVC PAR NO. 240 ize Part Number H H Wt. (bs.) Reducing ee x x FP PVC PAR NO. 240 ize Part Number H H Wt. (bs.) 4 x 4 x x x x x x 4 x x 4 x x 4 x x 2 x x 2 x x 2 x x 2 x x 2 x
31 chedule 40 Fittings 90 egree lbow x PVC PAR NO. 200 ize Part Number H Wt. (bs) Reducing 90 egree lbow x PVC PAR NO. 200 C H U 4 0 ize Part Number H H Wt. (bs.) 4 x x x F N
32 chedule 40 Fittings 90 egree lbow x FP PVC PAR NO. 20 ize Part Number H H Wt. (bs.) Reducing 90 egree lbow x FP PVC PAR NO. 20 ize Part Number H H Wt. (bs.) 4 x x
33 chedule 40 Fittings 90 egree lbow FP x FP PVC PAR NO. 202 ize Part Number H Wt. (bs) egree treet lbow P x PVC PAR NO. 204 ize Part Number H H Wt. (bs.) C H U 4 0 F N
34 chedule 40 Fittings 90 egree treet lbow MP x PVC PAR NO. 206 ize Part Number H H Wt. (bs.) egree treet lbow MP x FP PVC PAR NO. 207 ize Part Number H H Wt. (bs.)
35 chedule 40 Fittings ide Outlet lbow x x FP PVC PAR NO ize Part Number H H Wt. (bs.) 4 x 4 x egree lbow x PVC PAR NO. 209 ize Part Number H J Wt. (bs) C H U 4 0 F N
36 chedule 40 Fittings Cross x x x PVC PAR NO. 240 ize Part Number H Wt. (bs) Coupling x PVC PAR NO. 200 ize Part Number N Wt. (bs)
37 chedule 40 Fittings Reducing Coupling x PVC PAR NO. 200 ize Part Number N Wt. (bs) 4 x x Coupling FP x FP PVC PAR NO. 202 ize Part Number N Wt. (bs) C H U 4 0 F N 7
38 chedule 40 Fittings Riser xtension FP x MP PVC PAR NO. 20 ize Part Number N Wt. (bs) 2 x Female Adapter x FP PVC PAR NO. 20 ize Part Number N Wt. (bs)
39 chedule 40 Fittings Reducing Female Adapter x FP PVC PAR NO. 20 ize Part Number N Wt. (bs) 4 x x Male Adapter MP x PVC PAR NO. 209 ize Part Number N Wt. (bs) C H U 4 0 F N
40 chedule 40 Fittings Reducing Male Adapter MP x PVC PAR NO. 20 ize Part Number N Wt. (bs) 2 x x x x x x x x x x
41 chedule 40 Fittings Reducer Bushing, Flush tyle P x PVC PAR NO. 207 ize Part Number P N Wt. (bs) 4 x x x x x x x x x x x x x x x x x x x x C H U 4 0 F N 4
42 chedule 40 Fittings Reducer Bushing, Flush tyle P x FP PVC PAR NO. 208 ize Part Number P N Wt. (bs) 4 x x x x x x x x x x x x x x x x x x
43 chedule 40 Fittings Reducer Bushing MP x FP PVC PAR NO. 22 ize Part Number N Wt. (bs) 4 x x x x x x x x Cap PVC PAR NO. 26 ize Part Number Wt. (bs) C H U 4 0 F N
44 chedule 40 Fittings Cap FP PVC PAR NO. 27 ize Part Number Wt. (bs) Plug P PVC PAR NO. 28 ize Part Number P Wt. (bs)
45 chedule 40 Fittings Plug MP PVC PAR NO. 2 ize Part Number Wt. (bs) A HVAC Condensate P rap P x P PVC PAR NO ize Part Number A B Wt. (bs) HVAC Condensate Running rap P x P PVC PAR NO. 270 B ize Part Number A Wt. (bs) A C H U 4 0 F N
46 Pipe ata Flowuard old Pipe Flowuard old is a registered trademark of he ubrizol Corporation. CPVC Copper ube ize Pipe RAH PVC CHU NH 40 (WH) PAN N R PAN CPVC N COPPR PVC UB 20 Z PP AM MAX WORK W. PR PAR NO. NOM. Z UPC # QY. PR AV. O MN. WA PRUR 00 F K (N.) (N.) A 2 C OR 7 F (B.) C x , P 8. C x , P 8. C x , P.9 C x , P.9 C 200 x , P 22.2 C 200 x , P 22.2 C x , P. C x , P. C x , P 46.6 C x , P 46.6 C x P 79.5 C x , P 79.5 NO: RAH NH PP AR HPP N FU BUN QUANY ONY. PVC CHU 40 (WH) PAN N PVC 20 AM 2665 CO PP R CO R CPVC COPPR UB Z PP AM 2846 MAX WORK W. PR PAR NO. NOM. Z UPC # QY. PR AV. O MN. WA PRUR 00 F K (N.) (N.) A 2 C OR 7 F (B.) C x50 05, P 8.5 C x , P 4.0 C 200 x00 064, P 22.2 NF isted. Meets All Requirements of AM MA U..A. N esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM
47 Flowuard old Fittings MNMUM MNON FROM CNR O N OF OCK (AYN NH) FOR CPVC 4, R FN NOMNA MNMUM J MNMUM N MNMUM Z (N.) N. (mm) N. (mm) N. (mm) (9.70) 0.8 (4.65) 0.02 (2.59) (2.88) 0.25 (5.97) 0.02 (2.59) 0.6 (6.08) (7.29) 0.02 (2.59) (9.25) 0.9 (8.6) 0.02 (2.59) (22.45) 0.9 (9.9) 0.02 (2.59) 2.4 (28.8) (2.57) 0.02 (2.59) F O W U A R O APR OCK MNON FOR CPVC 4, R PAC PP FN NOMNA Z (N.) OCK NRANC AMR, N. (mm) A AVRA OCK NH, N. (mm) C MNMUM (6.08) (2.70) (22.45) (7.78).5 (28.8) (22.86) 4.86 (5.20).00 (27.94) (4.66).00 (.02) (54.8).700 (4.8) 47
48 Pipe ata ReUze Pipe ReUze is a registered trademark of Charlotte Pipe and Foundry Company. CPVC Copper-ube-ize Pipe for Non-Potable Water istribution RAH PVC CHU NH 40 (WH) PAN N R PAN CPVC N COPPR PVC UB 20 Z PP AM MN. MAX WORK W. PR PAR NO. NOM. Z UPC # QY. PR AV. O WA PRUR A 00 F K (N.) (N.) 2 C OR 7 F (B.) C 2005 RU 2 x , P 8. C 2007 RU 4 x , P.9 C 200 RU x , P 22.2 C 205 RU 2 x , P 46.6 C 2020 RU 2 x , P 79.5 NO: RAH NH PP AR HPP N FU BUN QUANY ONY. NF isted. Meets All Requirements of AM MA U..A. N esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM
49 Flowuard old CPVC C Fittings Coupling x C PAR NO. 200 UPC# ize N Wt. (bs) F O W U A R O Coupling x C PAR NO. 200 UPC# ize N Wt. (bs) 4 x x x (A) (A) Assembled 49
50 Flowuard old CPVC C Fittings ransition Coupling x C PAR NO. 200 UPC# ize N Wt. (bs) Reducer Bushing P x C PAR NO. 207 UPC# ize N Wt. (bs) 4 x x x x x x x x x x x x x x x
51 Flowuard old CPVC C Fittings ransition Bushing P P X C C PAR NO. 207 UPC# ize N Wt. (bs) F O W U A R O Male Adapter x MP C PAR NO. 209** UPC# ize N Wt. (bs) ** For cold water applications only. oes not conform to the requirements of AM
52 Flowuard old CPVC C Fittings Reducing Male Adapter x MP C PAR NO. 20** UPC# ize N Wt. (bs) 4 x Male Adapter, treet MP X A CPVC-PO C PAR NO. 2** UPC# ize N Wt. (bs) ** For cold water applications only. oes not conform to the requirements of AM
53 Flowuard old CPVC C Fittings Cap C PAR NO. 26 UPC# ize Wt. (bs) F O W U A R O 90 egree lbow x C PAR NO. 200 UPC# ize H H Wt. (bs)
54 Flowuard old CPVC C Fittings 90 egree lbow, Reducing x C PAR NO. 200 UPC# ize H H Wt. (bs) 4 x rop ar lbow All CPVC - x C PAR NO. 200 UPC# ize H Wt. (bs)
55 Flowuard old CPVC C Fittings 90 egree treet lbow P x C PAR NO. 204 UPC# ize H H Wt. (bs) F O W U A R O 45 egree lbow x C PAR NO. 209 UPC# ize H J Wt. (bs)
56 Flowuard old CPVC C Fittings treet lbow 45 egree P x C PAR NO. 20 UPC# ize H J Wt. (bs) ee x x C PAR NO UPC# ize H Wt. (bs)
57 Flowuard old CPVC C Fittings Reducer ee x x C PAR NO UPC# ize H H Wt. (bs) 2 x 2 x x 4 x x 4 x x 2 x x 2 x x 2x x 2 x x 2 x x 4 x x 4 x x 4 x x x x x x x x 4 x x 4 x x 4 x x x x 2 x x 2 x x 2 x x 2 x x 2 x x 2 x x 2 x F O W U A R O 57
58 Flowuard old CPVC C Fittings lab weep x P C PAR NO. 262 UPC# ize H Wt. (bs) ow-ead Female Adapter, Brass hreads BRA FP X C HUB C PAR NO. 205 UPC# ize Wt. (bs)
59 Flowuard old CPVC C Fittings ow-ead Male Adapter, Brass hreads BRA MP X C HUB C PAR NO. 25 UPC# ize Wt. (bs) F O W U A R O ow-ead CPVC/Brass rop ar lbow 90 egree BRA FP X CPVC HUB C PAR NO. 202 UPC# ize H H Wt. (bs)
60 Certification his is to certify that all Plastic Pipe and Fittings manufactured by Charlotte Pipe and Foundry Company are manufactured in the United tates and conform to the following standards: CH. 40 PVC PP AM 784, AM 785, AM 2665 FHA UM 79a FRA PCFCAON -P-20a NF ANAR NO. 4 AN 6 CH. 40 PVC WV PP CUAR COR AM 496, AM F 89 NF ANAR NO. 4 CH. 40 RePVC WV PP AM 496, AM F 760 NF ANAR NO. 4 CH. 40 PVC WV FN AM 784, AM 2665, AM, AM F 866 FHA UM 79a FRA PCFCAON -P-20a NF ANAR NO. 4 PVC PRUR PP R-2 AN R-26 AM 784, AM 224 NF ANAR NO. 4 AN 6 PVC CH. 40 PRUR FN AM 784, AM 2466 NF ANAR NO. 4 AN 6 PVC W CAN PP AM 784, AM F 480 NF ANAR NO. 4 AN 6 PVC CH. 80 PP AM 784, AM 785, PVC 20 NF ANAR NO. 4 AN 6 PVC CH. 80 FN AM 784, AM 2467, AM 2464, AM F 970 NF ANAR NO. 4 AN 6 60
61 Certification PVC WR MAN PP AM 784, AM 04 R 5 AM 22, AM F 477 PVC WR AN RAN PP AM 784, AM 2729 PVC HN WA PP AN FN AM 784, AM 2949 NF ANAR NO. 4 CPVC C FOWUAR O PP & FN AM 784, AM 2846 FHA UM-6a NF ANAR NO. 4. AN 6 CA ON PCF M CPVC C RUZ PP AM 784, AM 2846 NF ANAR NO. 4. CHMRAN CPVC CHU 40 PP AN FN AM 784, AM F 268 NF ANAR NO. 4 CH. 40 AB WV PP CUAR COR AM 965, AM F 628 NF ANAR NO. 4 CH. 40 AB WV FN AM 965, AM 266, AM FHA UM 79a FRA PCFCAON -P-22b NF ANAR NO. 4 C R F C A O N 6
62 Charlotte Pipe and Foundry Company (Charlotte Pipe ) Products are warranted to be free from manufacturing defects and to conform to currently applicable AM standards for a period of five (5) years from date of delivery. Buyer s remedy for breach of this warranty is limited to replacement of, or credit for, the defective product. his warranty excludes any expense for removal or reinstallation of any defective product and any other incidental, consequential, or punitive damages. his limited warranty is the only warranty made by seller and is expressly in lieu of all other warranties, express and implied, including any warranties of merchantability and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe or its representative, in addition to or beyond this imited Warranty, shall constitute a warranty. his imited Warranty may only be modified in writing signed by an officer of Charlotte Pipe. his imited Warranty will not apply if: M WARRANY ) he Products are used for purposes other than their intended purpose as defined by local plumbing and building codes, and the applicable AM standard. 2) he Products are not installed in good and workmanlike manner consistent with normal industry standards; installed in compliance with the latest instructions published by Charlotte Pipe and good plumbing practices; and installed in conformance with all applicable plumbing, fire and building code requirements. ) his limited warranty does not apply when the products of Charlotte Pipe are used with the products of other manufacturers that do not meet the applicable AM or CP standards or that are not marked in a manner to indicate the entity that manufactured them. 4) he Products fail due to defects or deficiencies in design, engineering, or installation of the piping system of which they are a part. 5) he Products have been the subject of modification; misuse; misapplication; improper maintenance or repair; damage caused by the fault or negligence of anyone other than Charlotte Pipe; or any other act or event beyond the control of Charlotte Pipe. 6) he Products fail due to the freezing of water in the Products. 7) he Products fail due to contact with chemical agents, fire stopping materials, thread sealant, plasticized vinyl products, or other aggressive chemical agents that are not compatible. 8) Pipe outlets, sound attenuation systems or other devices are permanently attached to the surface of Charlotte PVC, AB or CPVC products with solvent cement or adhesive glue. Charlotte Pipe products are manufactured to the applicable AM or CP standard. Charlotte Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe and Foundry. Any Charlotte Pipe products alleged to be defective must be made available to Charlotte Pipe at the following address for verification, inspection and determination of cause: Charlotte Pipe and Foundry Company Attention: echnical ervices 209 Randolph Road Charlotte, North Carolina Purchaser must obtain a return materials authorization and instructions for return shipment to Charlotte Pipe of any product claimed defective or shipped in error.any Charlotte Pipe product proved to be defective in manufacture will be replaced F.O.B. point of original delivery, or credit will be issued, at the discretion of Charlotte Pipe. 4/5/0 esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM 785. Charlotte and Charlotte Pipe are registered trademarks of Charlotte Pipe and Foundry Company. 62
63 Flowuard old CPVC C imited Warranty Charlotte Pipe and Foundry Company (Charlotte Pipe ) warrants to the original owner of the structure in which its Flowuard old C CPVC Pipe and Fittings (the Products ) have been installed, that the Products will be free from manufacturing defects and conform to currently applicable AM standards under normal use and service for a period of ten (0) years. Buyer s remedy for breach of this warranty is limited to replacement of, or credit for, the defective product. his warranty excludes any expense for removal or reinstallation of any defective product and any other incidental, consequential, or punitive damages. his limited warranty is the only warranty made by seller and is expressly in lieu of all other warranties, express and implied, including any warranties of merchantability and fitness for a particular purpose. No statement, conduct or description by Charlotte Pipe or its representative, in addition to or beyond this imited Warranty, shall constitute a warranty. his imited Warranty may only be modified in writing signed by an officer of Charlotte Pipe. his imited Warranty will not apply if: ) he Products are used for purposes other than the transmission of domestic water. 2) he Products are not installed in good and workmanlike manner consistent with normal industry standards; installed in compliance with the latest instructions published by Charlotte Pipe and good plumbing practices; and installed in conformance with all applicable plumbing, fire and building code requirements. ) his limited warranty does not apply when the products of Charlotte Pipe are used with the products of other manufacturers that do not meet the AM standard or that are not marked in a manner to indicate the entity that manufactured them. 4) he Products fail due to defects or deficiencies in design, engineering, or installation of the water distribution system of which they are a part. 5) he Products have been the subject of modification; misuse; misapplication; improper maintenance or repair; damage caused by the fault or negligence of anyone other than Charlotte Pipe; or any other act or event beyond the control of Charlotte Pipe. 6) he Products fail due to the freezing of water in the Products. 7) he Products fail due to contact with chemical agents, fire stopping materials, thread sealant, plasticized vinyl products, or other aggressive chemical agents not compatible with CPVC compounds. Charlotte Pipe products are manufactured to the applicable AM standard. Charlotte Pipe and Foundry cannot accept responsibility for the performance, dimensional accuracy, or compatibility of pipe, fittings, gaskets, or couplings not manufactured or sold by Charlotte Pipe and Foundry. Any Charlotte Pipe products alleged to be defective must be made available to Charlotte Pipe at the following address for verification, inspection and determination of cause: Charlotte Pipe and Foundry Company Attention: echnical ervices 209 Randolph Road Charlotte, North Carolina Purchaser must obtain a return materials authorization and instructions for return shipment to Charlotte Pipe of any product claimed defective or shipped in error. Any Charlotte Pipe product proved to be defective in manufacture will be replaced F.O.B. point of original delivery, or credit will be issued, at the discretion of Charlotte Pipe. /25/0 M W A R R A N Y esting with or use of compressed air or gas in PVC / AB / CPVC pipe or fittings can result in explosive failures and cause severe injury or death. NVR test with or transport/store compressed air or gas in PVC / AB / CPVC pipe or fittings. NVR test PVC / AB / CPVC pipe or fittings with compressed air or gas, or air over water boosters. ONY use PVC / AB / CPVC pipe for water or approved chemicals. Refer to warnings in PPFA User Bulletin 4-80 and AM 785. Charlotte Pipe is a registered trademark of Charlotte Pipe and Foundry Company. Flowuard old is a registered trademark of he ubrizol Corporation. 6
64 PO BOX 540 CHARO NORH CARONA 2825 PHON (704) (800) FAX (800) RAUR BY FAX (800)
DWV. ABS-DWV Pipe and Fittings. PVC-DWV Pipe and Fittings. PVC Sewer Pipe. PVC Schedule 30 DWV Thin Wall 3.25 in. O.D.
DMENONL CLOG B-DW Pipe and Fittings PC-DW Pipe and Fittings PC ewer Pipe PC chedule 30 DW hin Wall 3.25 in. O.D. Pipe and Fittings (Updated November 4, 2014) DW DC-DW 1977-2014 Charlotte Pipe and Foundry
More informationDWV. ABS-DWV Pipe and Fittings. PVC-DWV Pipe and Fittings. PVC Sewer Pipe. PVC Schedule 30 DWV Thin Wall 3.25 in. O.D.
DMENONL CLOG B-DW Pipe and Fittings PC-DW Pipe and Fittings PC ewer Pipe PC chedule 30 DW hin Wall 3.25 in. O.D. Pipe and Fittings (Updated July 2, 2014) DW DC-DW 1977-2014 Charlotte Pipe and Foundry Company
More informationSection 2. Pipe, Valves and Fittings Sizes ¼" to 12" Schedule 80 CPVC Piping System. Serviced by GF Little Rock
Section 2 Schedule 80 CPVC Piping System Pipe, Valves and Fittings Sizes ¼" to 12" Serviced by GF Little Rock Effective March 27, 2006 Glossary Std. Pack = Standard Carton Quantity FP = Female Pipe hread
More informationTERMS OF USE TERMS AND CONDITIONS. Plumbing and Heating Products (PL-WR)
TERMS OF USE 1. Watts pricing and product data is subject to change without notice and such changes supersede all previous versions. 2. Watts data is to be used as provided. Watts is not responsible for
More informationSCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12
PRICE GROUP DESCRIPTION 02 SCH 80 PVC through 8 92 SCH 80 PVC 10" AND LARGER VB GASKET for FLANGE DISCOUNT MULTIPLIER PRODUCTS SCHEDULE 80 PVC PRESSURE FITTINGS INCLUDES: SCHEDULE 80 PVC 1/4 TO 12 L80P
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices L15-80C Effective: March 26, 2015 Revised 9.22.2016 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationPVC Gasketed Fittings for PVC IPS Pressure Pipe ENGINEERED FOR DURABILITY
For the most up-to-date version of this price list, EFFECTIVE MARCH 4, 2019 ENGINEERED FOR DURABILITY HARRINGTON CORPORATION P.O. BOX 10335 LYNCHBURG, VIRGINIA 24506-0335 For the most up-to-date version
More informationVT Series 3-Way Ball Valves Product Data Sheet. Valve Availability. Size Range: 1/2" through 2" EPDM or Viton (FPM)
Product Data Sheet < SANDARDS > introduction ASM D1784 ASM D4101-86 ASM D2466 ASM D2467 ASM D2464 ASM F1498 IPEX can be used for flow diverting, mixing, or on/off isolation. hey will replace a ee + 2 valve
More informationPFS Rotameter. Variable Area Flowmeter. Instruction Manual PFS-RM200, RM230, RM250
PFS Rotameter 09/2018 Rev. 0 Variable Area Flowmeter Instruction Manual PFS-RM200, RM230, RM250 Please note: This instruction manual provides detailed information and instructions that must be read, understood
More informationPrice List Effective March 19, 2012
Georg Fischer Harvel LLC 300 Kuebler Road Easton, PA 18040 USA Phone: (610) 252-7355 Fax: (610) 253-4436 harvel.gfh.ps@georgfischer.com www.harvel.com PRICES SUBJECT TO CHANGE WITHOUT NOTICE PRICE SHEET
More informationSchedule 80 - CPVC Pressure Fittings
Discount Codes 03 Schedule 80 CPVC Schedule 80 - CPVC Pressure Fittings List Prices Effective: August 25, 2012 Revised September 2014 2 Schedule 80 - CPVC Products Catalog www.lascofittings.com Pricing
More informationTKD Series 3-Way Ball Valves Product Data Sheet
Product Data Sheet < SANDARDS > ASM D1784 ASM D2466 ASM D2467 ASM D2464 ASM F1498 introduction IPEX KD Series 3-Way Ball Valves can be used for flow diverting, mixing, or on/off isolation. hey will replace
More informationDiscount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC. PVC Drain - Waste Vent Fittings. Includes: DWV - PVC - through 8 HVAC.
Discount Codes 07 DWV-PVC through 8 22 HVAC DWV - PVC PVC Drain - Waste Vent Fittings Includes: DWV - PVC - through 8 HVAC s Effective: March 14, 2011 1 H x FPT H x MPT SP x MPT SP x SJ w/plastic Nut &
More informationSECTIO N 15 Phone: (866) Fax: (888)
PVC FITTINGS SCHEDULE 40, 80, INSERT NYLON FITTINGS PVC & CPVC NIPPLES SECTIO N 15 www.cbsupplies.ca Phone: (866) 503-5523 Fax: (888) 562-2095 AGI@cbsupplies.ca PRODUCTS LIST SCHEDULE 40 PVC PRESSURE FITTINGS
More informationTBM Series 3-Way Ball Valve
www.simtechusa.com TBM Series 3-Way Ball Valve Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 06-26-13 TBM Series Ball Valves SIMTECHRECOMMENDSREADINGTHEFOLLOWINGINFORMATIONPRIORTOINSTALLINGANDUSING
More informationEchoPod. Technical Support. Model: DL14-(XX) Quick Start
Technical Support For complete product documentation, video training, and technical support, go to www.flowline.com. For phone support, call 562-598-3015 from 8am to 5pm PST, Mon - Fri. (Please make sure
More informationLU27 Series Quick Start
Ultrasonic Liquid Level Transmitter LU27 Series Quick Start 2016 Flowline, Inc. All Rights Reserved Made in USA Flowline, Inc. 10500 Humbolt Street, Los Alamitos, CA 90720 p 562.598.3015 f 562.431.8507
More informationINSTRUCTIONS SMOKE BLOWER WITH HONDA ENGINE PART NUMBER
1 INSTRUCTIONS SMOKE BLOWER WITH HONDA ENGINE PART NUMBER 303-568 CHERNE INDUSTRIES INCORPORATED 1-800-THE PLUG 5700 LINCOLN DRIVE (1-800-843-7584) MINNEAPOLIS, MN 55436-1695 FAX: 1-800-843-7585 www.cherneind.com
More informationType Flexair Pneumatic Pressure Control Valves
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Type Flexair Pneumatic Pressure Control Valves Catalog pages from
More informationJ 6 Se r i e s. Pressure and Vacuum switches. features
J 6 S er i es J 6 Se r i e s Pressure and Vacuum switches features Gasketed, Die Cast Aluminum Enclosure with Epoxy Coating SPDT Switch Output Adjustable Deadband Option Sealed, Isolated Metal Bellows
More informationintroduction VR Piston Check Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2466 ASTM D2467 ASTM D2464 ASTM F1498 The IPEX VR Piston Check Valve is an ideal solution for process back-flow prevention. These valves feature
More informationMINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM
MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.
More informationPLEASE ENSURE THE JUMP STARTER IS FULLY CHARGED PRIOR TO FIRST USE.
PLEASE ENSURE THE JUMP STARTER IS FULLY CHARGED PRIOR TO FIRST USE.. (1) RG1000 EMERGENCY JUMP STARTER PORTABLE POWER SUPPLY (1) 3-IN-1 USB CABLE (1) RG1000 EMERGENCY JUMP STARTER PORTABLE POWER SUPPLY
More information10 S e r i e s PRESSURE SWITCH. features
10 S er i es 10 S e r i e s PRESSURE SWITCH features Tamper-Resistant Field Adjustment Adjustable Ranges from 4 to 7500 PSI (0,3 to 517,1 Bar) Choice of 7 Electrical Terminations 1-1/4" Diameter Height
More informationINSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE
INSTRUCTIONS PARTS LIST 308 493 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. A Second Gun Hose Kit 100 psi (6.9 bar) Maximum Working Pressure These kits include
More informationLubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser
INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber
More informationEchoPod. DL10, DL14, DL24, DS14 & DX10 Series Quick Start. DL14-00 Shown Flowline, Inc. All Rights Reserved Made in USA
EchoPod Ultrasonic Level Switch, Controller & Transmitter DL10, DL14, DL24, DS14 & DX10 Series Quick Start DL14-00 Shown 2016 Flowline, Inc. All Rights Reserved Made in USA Flowline, Inc. 10500 Humbolt
More informationPVC AND CPVC PRESSURE PIPES ASTM D-1785 and F-441 Schedule 80
2 PVC AN CPVC PRESSURE PIPES ASTM -1785 an F-441 Scheule 80 PVC ASTM 1785 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM PSI @73F LB/FT 10022 1/8
More informationMULTIPOSITION AIR CYLINDER
MULTIPOSITION AIR CYLINDER CAST ALUMINUM FOUR-POSITION - ALL AIR SERVICE INFORMATION MOUNTING! Devices should be mounted and positioned in such a manner that they cannot be accidentally operated. INSTALLATION
More informationUniversal Battery Holder Operator s Manual
Universal Battery Holder Operator s Manual Copyright 2018 Gamry Instruments, Inc. Revision 1.0 August 13, 2018 988-00068 Limited Warranty Gamry Instruments, Inc. warrants to the original user of this product
More informationParts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070BS Metering Systems Parts List 6 Model T-35 and T-57 Mark II Turbo-Meter with Blade Tip Sensors Parts List 6 MODEL T-35 and T-57 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures: 175,
More informationInline & 90 Live Swivels Fax:
Inline & 90 Live Swivels www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 CW1602 Super Swivels was established in 1986. Our goal is to manufacture heavy-duty, leak free,
More informationExtension Boot System
Extension Boot System Installation Instructions for Model 108 F LEX-AUGER Feed Delivery Systems Effective May 1995 MA1102A12 WARRANTY INFORMATION Chore-Time equipment warrants each new product manufactured
More informationA1100 GUARDIAN OVERFILL PREVENTION SYSTEM
A1100 GUARDIAN OVERFILL PREVENTION SYSTEM (with 493734S collar kit) Assembly and Installation Instructions (includes 566710S paper template) IMPORTANT: Read these instructions completely and carefully
More informationHand Shut-Off Valves for Standard and Extended Bonnets
and hut-off Valves for tandard and Extended Bonnets Product Bulletin 80-0 K Type: Angle, Globe T & Globe Y Purpose: Refrigerating pecialties Division offers a complete line of cast steel body valves with
More informationColor Change Valve. Instructions Parts List K
Instructions List Color Change Valve 0K For color changing or distribution of industrial paints and coatings or fluids. 00 psi (0. MPa, bar) Maximum Air Inlet Pressure 00 psi (. MPa, bar) Maximum Fluid
More informationParts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors
MP-1070DS Metering Systems Parts List 12 Model T-140 and T-230 Mark II Turbo-Meter with Blade Tip Sensors Parts List 12 MODEL T-140 and T-230 Mark II Turbo-Meters with Blade Tip Sensors Working Pressures:
More informationBC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this
More informationLU23, LU28 & LU29 Series Quick Start
Ultrasonic Liquid Level Transmitter LU23, LU28 & LU29 Series Quick Start 2016 Flowline, Inc. All Rights Reserved Made in USA Flowline, Inc. 10500 Humbolt Street, Los Alamitos, CA 90720 p 562.598.3015 f
More informationDual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev
Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How
More informationSTAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications
STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications Manufactured in ISO9000:2000 Facility Manufactured to ASTM/ASME A182/SA182 Items conform
More informationSC Swing Check Valves Product Data Sheet. Valve Availability. Body Material: Size Range: 3" through 8" Pressure: 100 psi (3") 70 psi (4" to 8")
Product Data Sheet introduction < STANDARDS > ASTM D1784 IPEX SC Swing Check Valves combine superior flow rate with maximum versatility. Stainless wetted parts and hardware, a top entry design, and integral
More informationFlo-Way. Measure Granular or Powdered Material. Stand Alone or Connect to Other Devices for Blending. Used by Successful Producers World-Wide
Flo-Way R Solids Impact Flow Meter Measure Granular or Powdered Material Stand Alone or Connect to Other Devices for Blending Used by Successful Producers World-Wide Visit our website: www.beltwayscales.com
More informationInstallation Instructions
1 Installation Instructions SharkBite Connection System The SharkBite System The SharkBite connection system uses an advanced push-fit design that works in two stages. When the tube is inserted into the
More informationIRRIGATION FITTINGS PRODUCTS PRICE LIST SWING JOINT & HEAVY TURF INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES PRICE GROUP DISCOUNT MULTIPLIER
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LASCO SWING JOINTS First
More informationElgin Hydraulic Clutch-Brake ECB-240, Product Number FORM NO. L F FORM NO. L F-0704
Elgin Hydraulic Clutch-Brake ECB-20, Product Number 96225 FORM NO. L-20283-F-070 1 FORM NO. L-20283-F-070 In accordance with Nexen s established policy of constant product improvement, the specifications
More informationEPIC. Express Line Proudly Manufactured in the USA by Check-All Valve. Rev. E
EPIC BY Express Line www.epiccheckvalves.com Proudly Manufactured in the USA by Check-All Valve Express Line EPIC By Check-All Valve In the beginning... the first Check-All valve was designed and built
More informationA Member of the. Integrated Metering Technologies
I n s t a l l a t i o n M a n u a l A Member of the Integrated Metering Technologies 1.0 General and Safety Do not install, operate or maintain this flow meter without reading, understanding and followingthe
More information30Deg.Two Motor Tandem
30Deg.Two Motor Tandem Installation Instructions for Model 75, 90, & HMC F LEX-AUGER Feed Delivery Systems APRIL 02 MA524F Two Motor Tandem Installation Instruction The Chore-Time Warranty Chore-Time Equipment
More informationWJ-Series. Turbine Meter Instructions ISO. 6 Meter. 3 Meter. Precision Flow Measurement. An ONICON Brand 9001:2008. if ie
WJ-Series Turbine Meter Instructions 6 Meter 3 Meter An ONICON Brand rt if ie d Comp a Ce ISO ny Precision Flow Measurement 9001:2008 TABLE OF CONTENTS General Information General Information...Page 3
More informationintroduction < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM F437 ASTM F1498 IPEX VA Air Release Valves are of a unique design, controlled by media and not pressure. Intended for use with tanks,
More informationPressure Pipes & Fittings
Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:
More informationPressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings -
Instructions Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 311082D Pressure Roller with 24-inch Fixed Extension - For application of architectural
More informationModel CP470. Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual
Model Triplex Ceramic Plunger Pump Operating Instructions/ Repair and Service Manual CP470 Updated 06/17 Contents: Installation Instructions: page 2 Pump Specifications: page 3 Exploded View: page 4 Part
More informationCarbon Steel Nipples
CORPORATE OFFICE TEL (800) 766-0076 LOCAL (323) 890-4455 WWW.SMITHCOOPER.COM FAX (323) 890-4456 Carbon Steel Nipples Schedule 40 & 80 Welded, Schedule 80 Seamless, & XXH Seamless Carbon Steel Nipples Specifications
More informationEPIC. express line. Proudly Manufactured in the USA by Check-All Valve Rev. D
EPIC BY express line Proudly Manufactured in the USA by Check-All Valve www.checkall.com Express Line EPIC By Check-All Valve In the beginning... the first Check-All valve was designed and built for use
More informationDWV PVC DWV Drain Waste Vent Fittings
STANDARDS & SPECIFICATIONS Standards provide greater assurance of product performance and consistency, and are available to assist design engineers in system specification. The most frequently referenced
More informationSWING JOINT & HEAVY TURF
PRICE GROUP DESCRIPTION 11 SWING JOINT 08 HEAVY TURF DISCOUNT MULTIPLIER PRODUCTS SWING JOINT & HEAVY TURF IRRIGATION FITTINGS INCLUDES: PVC SWING JOINTS AND IRRIGATION ACCESSORIES LSJHT EFFECTIVE JULY
More informationKit # NM, # Installation instructions: Note: do not tighten any clamps or nuts until the last step!!
KIT #680145-NM #8168740 3 Dual Exhaust Kit w/o mufflers page 1 This kit fits A-body, '67-74 Dart/Duster/Demon/Valiant, '67-69 Barracuda, all with V8, standard Hooker Competition headers (otherwise modifications
More informationParts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters
MP-1073C Rev. 3 Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Parts List 8 AAT-60 and AAT-90 Auto-Adjust II Turbo-Meters Working Pressures: 175, 275, 720 & 1440 psig Copyright 2001 Invensys
More informationRP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering
RP-1350 Rev. 1 Model 441-S Regulator Parts List Model 441-S Regulator Parts List Copyright 1999 Invensys Energy Metering DIAPHRAGM SIZE Nominal Inside Diameter A 7" Diaphragm 9 3 /4" 10" Diaphragm 13 1
More informationDWV-PVC PVC DRAIN, WASTE & VENT FITTINGS PRODUCTS PRICE LIST INCLUDES HVAC PRODUCTS. 07 DWV- PVC through 8 22 HVAC
PRICE GROUP DESCRIPTION DISCOUNT MULTIPLIER 07 DWV- PVC through 8 22 VAC PRODUCTS PRICE LIST DWV-PVC PVC DRAIN, WASTE & VENT FITTINGS INCLUDES VAC PRODUCTS DWV-PVC EFFECTIVE SEPTEMBER 18, 2017 KEY:...ub
More informationHP190SL Series Slimline Radon Fans
Installation and Operation Manual Item #: 412843 Rev Date: 070113 HP190SL Series Slimline Radon Fans United States 10048 Industrial Blvd., Lenexa, KS, 66215 Tel.: 800.747.1762 Fax: 800.487.9915 Canada
More informationSeries 2100 Operating Instructions
Series 2100 Operating Instructions Installation Instructions Visit the link below or scan the QR code to watch a detailed installation video: http://triteqlock.com/fresh After the lock, temperature probe,
More informationENTERTAINMENT. BGV-D8+ Supplement to Manual # Tonne to 1.3 Tonne 250 kg to 1300 kg (REV. AA) E627NH
ENTERTAINMENT BGV-D8+ Supplement to Manual #00000999.25 Tonne to 1.3 Tonne 250 kg to 1300 kg Columbus McKinnon Corporation CM Entertainment 140 John James Audubon Parkway Amherst, New York 14228-1197 1-800-888-0985
More informationAuto-Adjust II Turbo-Meters
Sensus Metering Systems Auto-Adjust II Turbo-Meters " AAT-0 and " AAT-30 MP-03D R Parts List T H E G A S I N D U S T R Y 0 6 5 8 9 3 3 Pressue Tap All Working Pressures Body Assembly Components Main Body
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationSingle-Position Detent Clutch DC Series. (i) MTY (81) MEX (55) QRO (442)
Single-Position Detent Clutch DC Series (i) FORM NO. L-2017-A-001 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationInstallation and Maintenance Instructions 44TA Liquid Level Float Switch
OPW Installation, Operation and Maintenance Manual, Page 54 MPORTANT: Please read these warnings and use the assembly instructions completely and carefully before starting. Failure to do so may cause product
More informationPressurized oil drain for collection of used lubricants and anti-freeze.
Instructions - Parts List 24-Gallon (90-Liter) Oil Ace 30864B Pressurized oil drain for collection of used lubricants and anti-freeze. Model 9577 Series A 8 psi (55 kpa,5 bar) Maximum Working Pressure
More informationStraight-Bore Clutch LSCC-32, 44, 54
Straight-Bore Clutch LSCC-32, 44, 54 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical
More informationReference Manual FM-200 Series
Flush Manifold A/P FOR LIQUID LAUNDRY SUPPLY SYSTEMS Reference Manual FM-200 Series Copyright 2004 Nova Controls, Inc. P/N 20-07941-00 Rev. C i P/N 20-07941-00 Rev. C ii P/N 20-07941-00 Rev. C 1 Description
More informationROMLink Installation Manual
ROMLink Plug-N-Load System ROMLink Installation Manual H52883PA - August 8, 2016 Rev B 4304 Mattox Road, Kansas City, MO 64150 Phone: 816-741-6600 Fax: 816-741-1061 Technical Hotline: 800-5-CIVACON Customer
More informationNominal Size Average O.D. Average I.D. Inches (mm) Inches (mm) Inches (mm)
The information contained in this section is based on current information and Product design at the time of publication and is subject to change without notification. Our ongoing commitment to product
More informationSERIES 740 VALVES PNEUMATIC DIRECTIONAL CONTROL
SERIES 740 VALVES PNEUMATIC DIRECTIONAL CONTROL Specifications and features 4 Way / 2 & 3 Position Solenoid & Air Pilot Operated Diaphragm-Poppet Valve TECHNICAL DATA: Port Sizes: Integrated Fittings for
More informationInstallation / Operation Instructions Sunnex ORION Series Exam Lights
Installation / Operation Instructions Sunnex ORION Series Exam Lights OR-120 OR-127 OR-220 OR-227 Models: OR-300 OR-400 OR-500 OR-600 1. APPLICATIONS The Sunnex ORION Series light was designed specifically
More informationRevised Chevy LS-1 - LS-7 Serpentine Kit. Installation Instructions Kit #20050 (Corvette LS-1 with Power Steering)
Revised 12-13-08 Chevy LS-1 - LS-7 Serpentine Kit Installation Instructions Kit #20050 (Corvette LS-1 with Power Steering) LS-1/LS-2 Parts List 1-20051-A... Alternator Bracket Body 1 - S144... 5 16 x 7
More informationModel For petroleum products and other fluids compatible with aluminum and buna-n seals.
Instructions - Parts List Piston Hand Pump 311308C Model 260407 For petroleum products and other fluids compatible with aluminum and buna-n seals. Model 260406 For herbicides and other chemicals or fluids
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More informationFCB-450, LCB-600, MCB-800
AIR CHAMP PRODUCTS User Manual FCB-450, LCB-600, MCB-800 Clutch-Brakes (i) In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are
More informationModel 540 PRESSURE REGULATOR VALVE FOR ABOVE GROUND STORAGE TANKS WITH SUCTION TYPE ISLAND DISPENSERS
Model 540 PRESSURE REGULATOR VALVE FOR ABOVE GROUND STORAGE TANKS WITH SUCTION TYPE ISLAND DISPENSERS INSTALLATION INSTRUCTIONS UNIVERSAL VALVE COMPANY, INC. 478 SCHILLER ST. ELIZABETH, NJ 07206 Rev A
More informationOwner s Manual FS-10/FreshSpa
Owner s Manual FS-10/FreshSpa Table of Contents Product Features................ Page 2 Parts List....................... Page 3 Configuration................... Page 4 Installation.....................
More informationOWNERS MANUAL HF4263
OWNERS MANUAL HF4263 ADJUSTABLE AB / BACK HYPER BENCH Note: Both Serial Number and Model Number are Required when Ordering Parts RECORD SERIAL NUMBER HERE CATALOG NUMBER 0805-000 Customer Service (800)
More informationPULSATION DAMPENERS OPERATION & MAINTENANCE MANUAL
PULSATION DAMPENERS OPERATION & MAINTENANCE MANUAL 1I All-Flo Pump Co. TABLE OF CONTENTS 1.Warnings and Cautions 3 2.Pulsation Dampener Specifications 4 3.Model Matrix 5 4.Plastic Disassembly, Spare Parts
More informationBenchmark HD Series Heavy Duty Bench Scale. Installation Manual
Benchmark HD Series Heavy Duty Bench Scale Installation Manual 93631 Contents 1.0 Introduction... 1 1.1 Benchmark HD Specifications...................................................... 1 2.0 Installation...
More informationintroduction RV Series Sediment Strainers Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D4101-86 ASTM D2466 ASTM D2467 ASTM F439 ASTM D2464 ASTM F1498 ASTM F437 IPEX RV Sediment Strainers protect critical pipeline components by
More informationMODEL HX. Fail Safe Hydraulic Actuator FEATURES INTRO AVAILABLE SIZES. Hydraulic Actuation
MODEL HX Fail Safe Hydraulic Actuator FEATURES Flexibility Model HX actuators can be adapted to operate valves from any manufacturer (interface information is required) and can be delivered with alternate
More informationIBS, incorporated Index Steel Pipe Fittings S T E E L F I T T I N G S
B, incorporated ndex teel ipe ittings A Assortments ipe ittings 9 - Drawer -8, -9 5 - Cabinet - 54 - Bin -0 57-40B Bin -9 ipe ittings -2 45 lbows -2 90 lbows -2 Bell Reducers - Couplings Merchant teel
More informationLUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type
INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)
More informationPump Package Conversion Kits
Instructions - Parts Pump Package Conversion Kits A0B ENG To install an L00CM or L500CM Check-Mate Displacement Pump on an existing motor. For professional use only. Not for use in explosive atmospheres.
More informationDAP-625S and DAP-875S
AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationPower Wheel. 1:1 Drives/Bearing Housings
Power Wheel 1:1 Drives/Bearing Housings 260.925.3200 AuburnGear.com Table of Contents Power Wheel 1:1 Features...3 Model 6B 1:1 Direct Drives...4 Model 8B 1:1 8T2 Direct Drives...6 Model 8B 1:1 8S2 Direct
More informationSWITCH HOUSING SUPPLIED ONLY AS AN ASSEMBLY OF ENCAPSULATED SWITCH & LEADS. FLOAT SUPPLIED ONLY WITH ENCAPSULATED MAGNET.
INSTALLATION INSTRUCTION SHEET SWITCH HOUSING, L-40N NORYL (PPO) SWITCH HOUSING, L-40VCR FORTRON (PPS) CERAMIC MAGNET BUSHING, L-40N NORYL (PPO) L-40VCR FORTRON (PPS) LEADS 24 LONG OR LONGER REED SWITCH
More informationASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings.
Instruction-Parts ASM Maxi Poles 312483B For the application of architectural paints and coatings. 3400 Series 4050 psi (27.92 MPa, 280 bar) Maximum Working Pressure Important Safety Instructions Read
More informationC Linear Positioner (Small)
C Linear Positioner (Small) WARNING: INSTALLATION AND MOUNTING The user of these devices must conform to all applicable electrical, mechanical, piping and other codes in the installation, operation or
More informationCORN HEADER MANUAL: CNH PRE-2012
CORN HEADER MANUAL: CNH PRE-2012 09020201c HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email:
More informationVertical Hydraulic Driver
Repair-Parts Vertical Hydraulic Driver 3A001C EN For use with a vertically mounted proportioning pump. For professional use only. D30 - Vertical Hydraulic Driver 100 psi (8. MPa, 8.7 bar) Maximum Working
More informationSwitch-Pak. AU13, AV13 & AZ13 Series Owner s Manual. w/ Compact Relay Controller
Switch-Pak w/ Compact Relay Controller AU13, AV13 & AZ13 Series Owner s Manual Flowline, Inc.. 10500 Humbolt Street, Los Alamitos, CA 90720. p 562.598.3015. f 562.431.8507. w flowline.com MN301430 Rev
More informationChevy LS-1 - LS-2 Serpentine Kit
Revised 9-8-08 Chevy LS-1 - LS-2 Serpentine Kit Installation Instructions Kit #20065 (Corvette LS-2 with Power Steering) Kit #20075 (Corvette LS-2 without Power Steering) Kit #20085 (LS-1 Motors with Power
More informationSTC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way
STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way Ordering Part No. = (e.g., E 1/2-3-S) Indicator / Control E 1/2 - - - 3-S Model Name Electric Actuated Valves E Port Size
More information