Pharmaceutical production Biotechnological and biomedical laboratories Food industry.
|
|
- Milton Greer
- 5 years ago
- Views:
Transcription
1 1
2 Stainless steel is an alloy steel with a high chrome content. Chrome helps to create a surface oxide film which protects metal and immediately forms in case of chemical or mechanical damage. BETA has relied on this unique peculiarity to develop the BETA INOX range of tools, which provide high resistance to corrosion and can be subjected to sterilization. The BETA INOX tools can be used in critical enviroments, - that is, in areas where the minimum level of contamination is not permitted. Some examples are: Nuclear applications Offshore applications Pharmaceutical production Biotechnological and biomedical laboratories Food industry. Furthermore, the BETA INOX tools avoid improper rust formation. Whenever any tools other than those are used on stainless steel screws, nuts or surfaces, a few particles may come off the tools, thereby triggering corrosion. This often results in aesthetic problems and, sometimes, in structural problems as well. Using stainless steel tools completely prevents polluting particles from spreading. Examples of applications are: Shipyards Building Solar systems Car industry STAINLESS STEEL + NO STAINLESS STEEL = RUST 7 STAINLESS STEEL + STAINLESS STEEL = NO RUST 3 THE BETA INOX TOOLS CAN BE AUTOCLAVE STERILIZED AT 121 C Characteristics Accurate selection of the materials 1 and the expert quest for the best heat treatment provide the BETA INOX tools with mechanical characteristics which far exceed the standards and are comparable to those of the other BETA tools. These tools share the same ergonomic properties and design as the other BETA tools, which have been known to, and appreciated by, professional users for over 75 years. Stainless steel is 100% recyclable, which is also a major plus. 1 Beta Utensili uses stainless steel aisi 420, magnetic.
3
4 C04TSS/ Mobile roller cab with seven drawers, made entirely of stainless steel 700 Main features: Seven drawers (570 x 410 mm) with ball bearing slides; 6 drawers, 83 mm high; 1 drawer, 170 mm high; 4 castors Ø 125 mm 2 fixed and 2 steering (two with brakes); Front centralized lock; Frame made entirely of stainless steel AISI 304 Castors, supports, ball bearings, drawer interiors and guides Drawer handles made of aluminium n 6 83 mm 25 kg mm 30 kg 63 HARD THERMOFORMED TRAYS T INOX mm 96BPINOX 2, mm T TINOX 2, mm 5 1,
5 920/55INOX /2 drive reversible ratchet, 72 teeth, Outstanding mechanical characteristics A mm ø mm L mm Ø mm A mm g / % STAINLESS STEEL 920INOX-A Hexagon hand sockets, Outstanding mechanical characteristics L1 mm Ø mm A mm L mm Ø1 mm g 920INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A INOX-A Compatible with the Beta thermoformed tray system (see section Thermoformed trays in the price list and on the website) T INOX 3x75-4x100 5,5x150-6,5x150 mm 1292INOX PH0x60-PH1x80 PH2x100 mm 7 T INOX-A mm 920/55INOX 650 2,2 5
6 42INOX Combination wrenches, open and offset ring ends, Compact heads Outstanding mechanical characteristics mm L mm A mm Ø mm S1 mm S2 mm g 42INOX-6 6x ,2 10,1 3,4 5, INOX-8 8x ,0 12,3 3,9 3, INOX-10 10x ,8 15,1 4,5 4, INOX-11 11x ,8 16,5 4,8 4, INOX-12 12x ,9 18,2 5,1 4, INOX-13 13x ,8 19,6 5,4 5, INOX-14 14x ,8 21,0 5,7 5, INOX-15 15x ,7 22,4 6,0 5, INOX-16 16x ,6 23,8 6,3 9, INOX-17 17x ,6 25,2 6,7 6, INOX-19 19x ,5 28,0 7,3 6, INOX-AS L mm A mm Ø mm S1 mm S2 mm g 42INOX-AS 1/4 1/4x1/ ,2 10,1 3,4 5, INOX-AS 5/16 5/16x5/ ,0 12,3 3,9 6, INOX-AS 3/8 3/8x3/ ,8 15,1 4,5 7, INOX-AS 7/16 7/16x7/ ,8 16,5 4,8 7, INOX-AS 1/2 1/2x1/ ,8 19,6 5,4 8, INOX-AS 9/16 9/16x9/ ,8 21,0 5,7 8, INOX-AS 5/8 5/8x5/ ,6 23,8 6,3 9, INOX-AS 11/16 11/16x11/ ,6 25,2 6,7 10, INOX-AS 3/4 3/4x3/ ,5 28,0 7,3 11, SET OF COMBINATION WRENCHES 42INOX/SC mm 42INOX/S mm 42INOX-AS/S /4-5/16-3/8-7/16-1/2 9/16-5/8-11/16-3/4 6
7 111INOX Adjustable wrenches High resistance to corrosion Outstanding mechanical characteristics L mm L A Max mm A1 mm g 111INOX INOX INOX BPINOX Ball head offset hexagon key wrenches, Outstanding mechanical characteristics Ball head makes it possible to work at angle of up to 30 to screw axis For tightening use short side, if possible L mm L mm L1 mm g 96BPINOX BPINOX 2,5 2, BPINOX BPINOX BPINOX BPINOX BPINOX BPINOX BPINOX BPINOX-AS L mm L1 mm g 96BPINOX-AS 5/64 5/ , BPINOX-AS 3/32 3/ , BPINOX-AS 7/64 7/ , BPINOX-AS 1/8 1/ , BPINOX-AS 9/64 9/ , BPINOX-AS 5/32 5/ , BPINOX-AS 3/16 3/ , BPINOX-AS 7/32 7/ , BPINOX-AS 1/4 1/ , BPINOX-AS 5/16 5/ , BPINOX-AS 3/8 3/ , L1 96BPINOX/B , mm SET OF BALL HEAD offset hexagon key wrenches 96BPINOX/B , mm 96BPINOX-AS/B /64-3/32-1/8-5/32-3/16 7/32-1/4-5/16 7
8 96TINOX Offset hexagon key wrenches, with high-torque handles, Outstanding mechanical characteristics Calibrated hexagon ends, to match screw perfectly. Ergonomic handle accurately proportioned according to wrench size, results in high tightening power - e.g. in small spaces. mm L mm L1 mm Ø mm T mm S mm g 96TINOX 2,5 2, ,0 13, TINOX ,5 13, TINOX ,5 18, TINOX ,5 20, TINOX ,0 25, TINOX ,0 26, TINOX ,0 26, TINOX , TINOX-AS L mm L1 mm Ø mm T mm S mm g 96TINOX-AS 3/32 3/ ,0 13,4 24, TINOX-AS 7/64 7/ ,5 13,4 21, TINOX-AS 1/8 1/ ,0 18,0 31, TINOX-AS 9/64 9/ ,5 18,0 41, TINOX-AS 5/32 5/ ,0 20,6 68, TINOX-AS 3/16 3/ ,5 20,6 69, TINOX-AS 7/32 7/ ,0 25,2 110, TINOX-AS 1/4 1/ ,0 25,2 140, TINOX-AS 5/16 5/ ,0 27,6 221, TINOX-AS 3/8 3/ ,0 27,6 335, TINOX/S , mm SET OF OFFSET HEXAGON KEY WRENCHES with handles 96TINOX/S , mm 96TINOX-AS/S /32-1/8-5/32-3/16 7/32-1/4-5/16 8
9 1048INOX Slip joint pliers, boxed joints, 7-position model Outstanding mechanical characteristics L mm A mm L1 mm S mm g INOX Adjustable pliers, two positions, Outstanding mechanical characteristics L mm L1 mm A mm A1 mm S mm g ,0 9,
10 1290INOX Screwdrivers for slotted head screws made of stainless steel. Outstanding mechanical characteristics.. Bimaterial handle with hard polypropylene core injected onto blade for safe anchorage. Soft thermoplastic rubber coating. Ø L L1 SxAxL mm L1 mm Ø mm g 1290INOX 2,5x50 0.4x2.5x , INOX 3x75 0.5x3x , INOX 4x x4x , INOX 5,5x150 1.x5.5x , INOX 6,5x x6.5x , Ø 1292INOX Screwdrivers for cross head Phillips screws, L. Outstanding mechanical characteristics.. Bimaterial handle with hard polypropylene core injected onto blade for safeanchorage. Soft thermoplastic rubber coating. L1 PxDxL mm L1 mm g 1292INOX 3x60 0x3x INOX 4,5x80 1x4.5x INOX 6x100 2x6x D 1293INOX/D SET OF SCREWDRIVERS 1290INOX 2,5x50-3x75-4x100-5,5x150-6,5x150 mm 1292INOX PH0x60-PH1x80-PH2x100 mm 10
11 34INOX Flat chisels, A Outstanding mechanical characteristics L L mm A mm Ø mm g 34INOX INOX Ø 39INOX Wedges, Outstanding mechanical characteristics L mm A mm S mm g 39INOX INOX INOX A S L L INOX Engineer s hammers, A g A mm L mm L1 mm g L Outstanding mechanical characteristics 11
12 Beta Utensili S.p.A. Via Volta Sovico (MB) - Italy Tel Fax
Configure your workshop online. wwwbetatoolscom
Promotion valid until 31/12/2019 Configure your workshop online www.rsc55.it www.youtube.com/ wwwbetatoolscom INDEX Automotive 58 80 Beta collection 103,104 Bits 25 Bycicle tools 57 Containers and Assortments
More informationMISCELLANEOUS WOOD CHISEL
MISCELLANEOUS WOOD CHISEL In hanger WOOD CHISEL SET - Grounded and lacquered blade - Hardened blade - Ergonomic bimaterial handle 74 0 3,0 74 3,8 744 4 3,9 74 3,99 748 4, 7 0 4,3 7 4,34 7 4,43 pieces -
More information25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
More informationD Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99
D004000 11 Piece 6 Point Standard SAE Socket Set 5/32"-9/16" List Price: $32.46 $21.99 D004008 9 Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99 $77.99 D004005 25 Piece 6 Point
More informationD Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.
D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece
More informationWhy Dynamic Toolboxes?
Why Dynamic Toolboxes? All drawers feature ball bearing slides for smooth operation Scratch and solvent resistant powder coat finish Drawer liners included Tubular lock and key for maximum security Heavy-duty
More informationWRENCHES 12 PIECE RATCHETING COMBINATION WRENCH SET PIECE COMBINATION WRENCH SET PIECE OPEN JAW WRENCH SET
WRENCHES 12 PIECE RATCHETING COMBINATION Contains sizes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19mm 72 tooth mechanism for 5 minimum working arc Manufactured from chrome vanadium steel and heat treated
More informationScrewdrivers 300
112 116 120 130 133 136 141 143 144 148 149 151 Screwdrivers 300 Industrial Plus Series The Industrial Plus series is specially developed for the toughest jobs. The handle is composed by an anti-slip thermoplastic
More informationSCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET PIECE TORX SCREWDRIVER SET 8 PIECE 1000 VOLT INSULATED SCREWDRIVER SET
Quality Since 1908 SCREWDRIVER SETS 8 PIECE FLARED & POZIDRIV SCREWDRIVER SET Slotted Tips: 3.5x75, 4x100, 5.5x100, 6.5x150, 8x150 Pozidriv Tips: Pz1x100, Pz2x125, Pz0x75 26.35 11.26 List Price 37.61 Ref:
More information$4.99 $26.99 $19.99 $25.99 $7.99 $10.99 $12.99 $15.99 $17.99 $ Rubber Mallet-Hickory Handle. Dead Blow Hammer-Fiberglass Handle
Two or three jaws design for Spring-loaded jaws for quick and easy one person set-up for different applications Heavy duty forcing screw with live center for strong even pulls Spread range from 3 to 7
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More informationAUTOMOTIVE / INDUSTRY
MARYAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
More informationMade from chrome-molybdenum
JTC-1605 DELUXE CROWS-FOOT WRENCH SET Made from chrome-molybdenum steel with a gap for use on union nuts fitted in hydraulic oil, diesel injection, and compressed air systems. Spec: 10-pcs o 3/8" DR. x
More information06 Screwdrivers and bits
06 Screwdrivers and bits Magnetic bit Insert bit 109 112 holder Go through Bit set 113 115 screwdriver Bit holding Screwdriver 116 Screwdrivers set 118 120 driver Precision screwdriver 122 Insulated screwdriver
More informationWRENCHES COMBINATION WRENCHES RATCHET COMBINATION WRENCHES RATCHET RING WRENCHES IN-1 RATCHETS RATCHET WRENCHES MODULES ...
WRENHES...22 OMINTION WRENHES...28 RTHET OMINTION WRENHES...32 RTHET RING WRENHES...32 4-IN- RTHETS...33 RTHET WRENHES MODUES...34 OPEN-END WRENHES...36 DIN WRENHES...37 OFFSET RING WRENHES...39 NGED SOKET
More informationSONIC GM Express Service Tool Kit*
SONIC GM Express Service Tool Kit* Drawer 1 E107901 Empty Foam for the 26" SFS 79pcs 1/4" Combination Socket Set & Screwdrivers 1 ea 1310 Screwdriver, PH.0 1 ea 1311 Screwdriver, PH.1 1 ea 1312 Screwdriver,
More informationSUPER SUPER SUPER AUTUNNO AUTUMN 2008
SUPER AUTUNNO AUTUMN 2008 INDUSTRY SUPER valid from 01/09/2008 to 31/12/2008 available at our distributors 2 AUTOMOTIVE SUPER the new USAG offer novelties and successful products 3 WRENCHES 285 N/DS9 Code
More information40% off list Promotion Valid 01/01/ /03/2019
40% off list Promotion Valid 01/01/2019-31/03/2019 Prices do not include V.A.T. A solution for every need! Choose the roller cab which best fits your requirements! Certified quality In 2018 Beta roller
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More informationCore innovation. Body perfection. New pistol air screwdrivers 15C
Core innovation Body perfection New pistol air screwdrivers 15C New pistol air screwdrivers 15C The future of tightening is already here The very modern air screwdrivers 15C introduce within the tightening
More informationSafe Tool holding system by Beta. Height-Safe
afe Tool holdin system by Beta Heiht-afe 2 H-FE CTOGUE H-FE Tool holdin system by Beta For jobs to be carried out hih from the round or in the presence of mechanical movin parts, safety is a key factor
More informationHAND TOOLS GUARANTEED TO PERFORM. Trusted by Professionals Since
GUARANTEED TO PERFORM Trusted by Professionals Since 1977 www.sunextools.com SUNEX TOOLS WARRANTY PROGRAM Sunex Tools Sockets, Wrenches, Screwdrivers, Specialty Tools, and Vises carry a LIFETIME warranty
More informationTHAI PHATANASIN (CHIN SENG) CO.,LTD. บร ษ ท ไทยพ ฒนส น (จ นเส ง) จำ ก ด. Wrench & Torque Wrenches. 1/2 DR.Torque Wrench Set (11PCS) Torque Wrench
Wrench & Torque Wrenches Micrometer Adjustable Torque Wrench (Window DIsplay) Torque Wrench Chrome Vanadium Steel Ratchet Head Flip reverse ratchet action Spring ball socket retention and push-button quick
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More informationNON-SPARKING SAFETY TOOLS FOR USE IN ALL ATEX ZONES
SAFETY TOOLS FOR USE IN ALL ATEX ZONES www.gruposiccis.com TOOLS CONTENTS Page INTRODUCTION... 2 HAMMERS, AXES... 3-4 WRENCHES AND ADJUSTABLE WRENCHES... 5-11 SCREWDRIVERS... 12 PUNCHES, PINS... 13 CHISELS,
More informationWORKSHOP 1429, 839, NEW SELECTION 2018 / EN. gedore.com. from. WSL-M-TS-172 TOOL TROLLEY WORKSTER with tool assortment 172 pieces
WORKSHOP SELECTION 2018 / EN WSL-M-TS-172 TOOL TROLLEY WORKSTER with tool assortment 172 pieces 839, from 1429, NEW 1507 XL MOBILE WORKBENCH with extra-wide drawers gedore.com WORKSHOP GEDORE MODULE SYSTEM
More informationRECA VISO Assortments
Clear plastic lids: Easy viewing of product and stock. Ergonomically designed handle: comfortable to carry and use. Stackable without slipping: the base and the lids fit into one another. RECA VISO Cabinets
More informationFocus Leading-edge tools. Best terms. Great. offers. here! Industry TRANSPORT
Focus 205. Leading-edge tools. Best terms. Great offers here! Industry Energy TRANSPORT Aerospace Factory and workshop equipment, sets of tools STAHLWILLE Tool trolleys. Made-to-measure craftsmanship.
More informationNEW FOR POLE POSITION DEALS PREMIUM QUALITY. PROFESSIONAL PRODUCTS. OCT JAN 2019 IN THIS ISSUE:
BUILTÊ ÊTOÊLASTÊA L PREMIUM QUALITY. PROFESSIONAL PRODUCTS. I F E T I M E OCT 2018 - JAN 2019 IN THIS ISSUE: Project Car Tool Storage Sockets & Accessories Spanners & Wrenches Fastening Tools Torque Control
More informationScrewdrivers. Crimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws.
rimped conductors can be fastened in the corresponding connection chamber either by the direct plug-in technique or by means of screws. Electric screwdrivers Weidmüller screwdrivers are ideal one-hand
More informationPLUS. 5 x 9. Magnetic Tray SKU x 11. Magnetic Tray SKU Four Powerful Magnets with Protective Rubber
STORAGE Workbench Professional Workbench SKU 400312 49 21006 Weight Capacity: 1,200 lbs Overall Dimensions: 60 W x 31 D x34 H 13 Gauge Steel Construction Full Bottom Shelf Durable Powder Coated Finish
More informationHandle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Handle: 6" Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More information9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1, $866 95
93119 9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1,300.79 $866 95 93109 9 Drawer Top Chest - PRO+ Series 26 x 19 x 21 Capacity: 7,130 cu. in. List $745.25 $496 95 93211
More information$1795 $2350 $540 $1650 $2700 $1200 BONUS! BONUS! More than 3,000 tools within our range! 295PC TOOL KIT 262PC TOOL KIT 7 DRAWER ROLL CABINET
262PC TOOL KIT 295PC TOOL KIT 9 Drawer Tool Box with BBS High Density Foam Inserts Spanner Sets Assorted Pliers Screwdriver Sets Punch & Chisel Sets Hex Key Set. Hacksaw, Hammer Plus Much More ATK79BB
More informationIndustrial Equipment CONTENT Hand Tools 703 Hydraulic Tools 731 Wash Down and Cleaning 743
Industrial Equipment CONTENT 2 3 Hand Tools 703 Hydraulic Tools 73 Wash Down and Cleaning 743 7 702 www.pirtek.com Industrial Equipment HAND TOOLS PRODUCT INDEX Pirtek offer a comprehensive range of tools
More informationMASTERTORK SCREWDRIVERS. inches. both in mm and. Magnetic tip
MASTERTORK SCREWDRIVERS EGA Master offers a wide range of screwdrivers for professional use, among which you can find Mastertork and Rotork screwdrivers models. The Mastertork screwdriver type made in
More information14 Piece 1/4" Dr. Standard
25507A 7 Piece 3/8 Dr. SAE U-Joint Socket Set 3/8" - 3/4" 6 Pt., Mirror chrome finish for maximum resistance against corrosion. Made of premium tool steel and precision heat-treated for maximum durability.
More informationStanley Hand tools Features & benefits stanley Fatmax screwdrivers. 11 piece stanley Fatmax screwdriver set
Stanley Hand tools Features & benefits stanley Fatmax screwdrivers Ergonomically designed tri-lobular handle provides more torque than traditional-style screwdrivers for less effort. High strength polypropylene
More information04 Spanners and Wrenches
04 Spanners and Wrenches ouble open end spanner 73 Open slogging wrench 75 Combination Insulated wrench 75 76 spanner Offset ring spanner 78 Ring slogging wrench 80 Flat ring spanner 81 Offset ratchet
More informationInserting Tools for Screwdrivers
Screwdriving Technology Automation Air Motors Air Tools Inserting Tools for Screwdrivers nbits nsockets nfinders nbit holders With the longest lifetime and highest wear resistance combined with the best
More information07 Sockets. 3/8 sq. dr. socket. 1/4 sq. dr. socket. 1/2 sq. dr. socket. Automotive socket. 1 sq. dr. socket. Insulated socket. 3/4 sq. dr.
07 /4 sq. dr. socket 9 3/8 sq. dr. socket 34 / sq. dr. socket 36 Automotive socket 4 Insulated socket 44 3/4 sq. dr. socket 46 sq. dr. socket 48 Impact socket 49 /4 sq. dr. socket set Extending ratchet
More informationVisitop (alu) - Loft - Square
C6 Visitop (alu) - Loft - Square TIMBER - GLASS DESIGN SLIDING DOOR SYSTEMS visitop (alu) - loft - square VISITOP These architectural systems for timber or glass doors of max. 100kg procure an industrial
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationexclusively represented in the USA by:
exclusively represented in the USA by: Price List 2015 Terms of Delivery and Payment Number 1 IN CUSTOMER SERVICE! Here s why: NO MINIMUM ORDERS, NO STOCKING REQUIREMENTS, NO DROP SHIP FEES We don t believe
More information20 DRAWER 23 DRAWER. 5, MTZBK7217MZ + MTZBK7200H + MTZBK7203SL Overall Dimensions: 91 W x 30 D x 75-1/2 H. Hutch MTZBK7200H.
ALL MONTEZUMA TOOL BOXES REQUIRE LIFT GATE SERVICE SKU 301610 MTZLIFTGATE 100 00 TOOL BOX COMBOS 17 DRAWER 20 DRAWER 23 DRAWER 17 Drawer Box with SKU 295815 MTZCOMBO1 4,49 + Overall Dimensions: 72 W x
More informationTuttnauer Steri-Center. Partnership
Partnership Steri-Center Adjustable Height Packing Table Steri-Center is an ergonomic height adjustable packing table specifically designed for sterilization preparation packing of instrument baskets used
More informationsavings flexibility recyclable LIGHTNESS FULL FLOW MECHANICAL STRENGTH IMPROVE CONTROL TECHNICAL BROCHURE aesthetic performance CHANGE
TECHNICAL BROCHURE aesthetic performance flexibility thermal comfort PREMIUM QUALITY MECHANICAL STRENGTH IMPROVE CHANGE LIGHTNESS savings high resistance to corrosion low and high temperature systems FULL
More informationMINI COOPER HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT DESIGNED FOR USE WITH BALL MOUNT # D-19 / 45519
10/8/2012 PAGE 1 of 6 ITEM 1 QTY 8 Parts List PART NUMBER DESCRIPTION 3/8" CONICAL TOOTHED WASHER TOOLS REQUIRED RATCHET TORQUE WRENCH 12" EXTENSION 12mm SOCKET 8mm SOCKET OFFSET SCREWDRIVER FLAT BLADE
More information4. Rear Axle REAR AXLE
REAR AXLE DRIVE SHAFT SYSTEM 4. Rear Axle A: REMOVAL 1) Disconnect the ground cable from battery. 2) Lift-up the vehicle, and remove the rear wheel. 3) Unlock the axle nut. 4) Remove the axle nut using
More informationEXPERT by FACOM provides an affordable solution to all industrial and automotive professionals.
2 EXPERT by FACOM provides an affordable solution to all industrial and automotive professionals. Accurate and safe EXPERT tools are designed, developed and produced by FACOM s R&D teams to meet the professionals
More informationProfessional Insulated Tools. Supporting Arc Flash Protection. Updated 3/1/10. Innovations that work. 10,000 Volt Tested 1000 Volt Rated
Professional Insulated Tools Supporting Arc Flash Protection Updated 3/1/10 Innovations that work 10,000 Volt Tested 1000 Volt Rated 2 Toll Free: (800) 494-6104 Arc Flash Protection: Wiha Insulated tools
More informationThreaded rod cutters. Trapezoid-sheet pliers TOOLS. Field of application Very simple cutting of threaded rods on site
Threaded rod cutters Very simple cutting of threaded rods on site Cuts galvanised threaded rods in the qualities 4.6 and 5.8 No reworking of the threaded rods necessary Clean cut allows the nuts to be
More information14 Miscellaneous tools
14 Miscellaneous tools Bench vice 249 Suction lifter 251 Telescopic 252 mirror Wire guide 252 Puller 254 Multi-tool 257 Riveter 258 Oil filter wrench 260 Electric welder 261 Mortar Glue gun 261 Caulking
More informationLIMITED SLIP DIFFERENTIAL INSTALLATION
Installation of the limited slip gear can be done with axle out of car or with car lifted to gain access from underneath. Refer to repair manual for proper lifting instructions if car is to be lifted.
More informationSOFT FOAM INSERTS. Soft Foam Inserts.
SOFT FOAM INSERTS > Socket tool sets > Double open-end wrench sets > Combination wrench sets > Ratcheting combination wrench sets > Screwdriver sets > Pliers sets > Hook and scraper sets > VDE Tool sets
More information3/8-Inch Torque Wrench Square Drive, Torque Range Of 30 to 250 Inch Pound (3.39 to NM)
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 57005 3/8" Torque Wrench Square Drive Klein Tools Catalog Number 57005 Manufacturer Klein Tools 3/8-Inch Torque Wrench
More informationTOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944
TOOLS TO FIRE YOUR EMOTION! 2017-05-01 2017-08-1 V4951 Ratcheting open-end wrench set Hot Innovation! Closed solid steel ratchet V241 7 8 Socket set Hot Price! V4944 V494 HOT17-1/EN/NO/9 7 Valid until:
More informationTools for Switch Machines, Switch Layout Hardware and Related Equipment
Machines and Associated Ansaldo STS USA Tools for Switch Machines, Switch Layout Hardware and Related ASTS USA offers a complete line of generic and special-purpose tools to expedite repairs and adjustment
More informationABC Awards Level 1 Award in. Automotive Studies. Multiple Choice Examination
ABC Awards Level 1 Award in Automotive Studies Multiple Choice Examination Specimen Paper TIME: 1 hour Each question is worth 1 mark. The total number of marks available is 35. This is to show the type
More informationHAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT DESIGNED FOR USE WITH BALL MOUNT # 36053B
2/20/2013 ITEM 1 QTY 8 Parts List PART NUMBER DESCRIPTION 3/8" CONICAL TOOTHED WASHER TOOLS REQUIRED RATCHET TORQUE WRENCH 12" EXTENSION 12mm SOCKET 8mm SOCKET OFFSET SCREWDRIVER FLAT BLADE SCREWDRIVER
More information7 Piece 3/8 Dr. SAE Hex Head Socket Set
Reversible Ratchets with Acetate Handle Nº of Drive Teeth Length List 10836 1/4" 36 6¹ ₂ $63.47 $42 95 20840 3/8" 40 9 $94.72 $63 95 31840 1/2" 40 11⁵ ₁₆ $99.83 $66 95 Mirror chrome finish for maximum
More informationPowerful Brands from Wiha. Proturn 3K Proturn 1K
Powerful Brands from Wiha. Proturn 3K Proturn 1K Wiha Proturn 3K. The handy all-rounder. The Wiha Proturn 3K is a screwdriver with a multi-component handle. Users in both industry and DIY appreciate the
More informationMinimally protruding jaw shank for greater capacity in tight spaces.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationTABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationHAND TOOLS WALL DRIVE PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 2011 PIECES
SPANNERS COMBINATION Short Arm Ratchet Combination Spanners Manufactured from quality chrome vanadium steel with hardened jaws and high polish mirror finish, corrosion resistant and easy to clean. Conforms
More informationYEARS PROMO Art , 618,
YEARS PROMO 2019-1 01.02.2019 31.08.2019 Art. 202.128.101 535, 618, MY FAVORITE TOOLS Promo 2019-1 2 L3 L1 L4 L5 L6 525, 562, L1 L2 L3 kg 690 mm 470 mm 900 mm 240 L4 536 mm 410 mm 45 mm 25 L5 536 mm 410
More information5 Piece 3/4 Dr. SAE Impact Hex Head Socket Set 9/16, 5/8, 3/4, 7/8, 1. Black industrial finish with color coded magnetized socket bar. List $317.
Closed Back Design Ratchets Up to 64% more torque versus our previous generation ratchets. Design prevents dirt and debris from damaging the ratcheting mechanism. Contour handle, thinner head and compact
More informationPKL Pneumatic Impactors
Copenhagen Vibrator Products PKL Pneumatic Impactors High impact power Low energy consumption Supreme silo emptying Rubber hammer effect option Automatic self-control option High temperature option Available
More informationHEX-CELLENT TOOLS! ALLEN KEYS FOR EVERY APPLICATION DESIGNED FOR THOSE HARD TO REACH AREAS A GREAT ACCESSORY FOR CORDLESS SCREWDRIVER OR DRILL!
HEX-CELLENT TOOLS! 7-PC 1/2" Hex Socket Set 60 GIVEN FOR ANY TRADE-IN Contains sizes 6, 8, 10, 12, 14, 17 & 19mm Manufactured from special alloy steel Nickel chrome plating protects against corrosion High
More informationCATALOGUE SHOP ONLINE NOW
CATALOGUE 2018 SHOP ONLINE NOW Avex has been supplying the aircraft industry since our inception in 1965 and has grown to be the single most comprehensive supplier of aviation tooling since 1994. The Avex
More informationHandle: 20" Chain: 25"
Handle: 6" JTC-1147 6" CHAIN WRENCH Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More information$ Ex. GST $
SALE ENDS 31/12/08 LOOK INSIDE FOR MORE GREAT GIFT IDEAS! Apprentice Tool Chest 151 Piece 6 Drawer This fantastic 151 Piece Apprentice Tool Kit is ideal for the New Apprentice Including all the tools you
More informationRadial Electric Winch 60 Rewind
Installation and Maintenance Manual MRRW-02 Radial Electric Winch 60 Rewind Index Introduction Technical characteristics Performance data Weight Maximum working load Outline Radial 60 Rewind Horizontal
More informationAUTUMN ACTION /2017
AUTUMN ACTION 207 58/207 YOUR WORKSHOP 6 DRAWERS 3 MODULES 72 Kg 546 97 774 2 59 R6/3DV code U0598003 DUCATI CORSE ROLLER CABINET EMPTY INCLUDED IN THE PRICE POLO DUCATI CORSE SIZE CODE M U38000057 L U38000058
More informationAIRTOOLAUTUMNACTION 59/2018 POWER IN THE SPOTLIGHT. From today USAG designs and manufactures top quality airtools
2018 AIRTOOLAUTUMNACTION 59/2018 POWER IN THE SPOTLIGHT From today USAG designs and manufactures top quality airtools Index Impact wrenches Grinders Drills 2-9 10-11 12 Sanders Ratchets Screwdrivers 13
More informationAccessories for the measurement of tightening torque. Digital and electronics dynamometric wrenches
Accessories for the measurement of tightening torque Digital and electronics dynamometric wrenches Methods used for the measurement of tightening torque For an effective analysis of the tightening process,
More informationAdjustable Torque Wrenches. Square Drive. Units. 5 N.m N.m lbf.in lbf.in kgf.
www.norbar.com 5 The 5 is a torque wrench that offers high accuracy and the convenience of interchangeable 1/4 in. hexagon bits. (ISO 1173:1988 Form C drive bits). Accuracy of ±3% of reading exceeds all
More informationDIN DIN WRENCH COMBINATION WRENCH COMBINATION WRENCH SET DOUBLE OPEN END WRENCH
1 WRENCH COMBINATION WRENCH DIN 3113 Size (inch) Chrome plated Polished jaws and rings Chrome-Vanadium steel Hardened and tempered KW0100334 ¼ 105 x 15 x 5 20 KW0100335 5 /16 125 x 20 x 5 30 KW0100336
More informationFastener Drive & Screwdriving
www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and
More informationAllen keys, spanners. T-Handle socket wrenches 1000 V. Right angle allen keys 1000 V. T-handle allen keys 1000 V. Cross type socket wrenches 1000 V
Allen keys, spanners T-Handle socket wrenches 1000 V chrome vanadium steel, full insulated, for hexagon nuts, DIN 7440, Right angle allen keys 1000 V chrome vanadium steel, for hexagon socket screws, full
More informationPRO. ALL NEW ratchets from. 10% more compact HeaD for access to the tightest of SpaceS... the latest products at the best prices from
PRO INDUSTRY JAN - MAR 2017 the latest products at the best prices from ALL NEW ratchets from 10% more compact HeaD for access to the tightest of SpaceS... 10% more compact HeaD 72 tooth mechanism for
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More informationAIR COMPRESSORS MICHELIN
MICHELIN S Today MICHELIN is developing new products which not only support motorists needs but go further to provide assistance with general care and maintenance. These products deliver what the MICHELIN
More informationSales Blaster rd Quarter
Authorized Distributor for Sales Blaster 204 rd Quarter SLUGGING WRENCH RETAINERS Product Code Stud Size Length List Price Sales Price SWR-24 /8 2/2 $22.64 $26.0 SWR-28 /8 2 $2.0 $8. SWR-2 2 /8 $28. $42.6
More informationDuct filter units. Duct HEPA filter units AKF
Duct HEPA filter units AKF Application Duct HEPA filter unit AKF is being used in the network of inlet and outlet ducts used to supply or extract air from the rooms with highest demands regarding air cleanness.
More informationMOBILITY 429, 1549, NEW SELECTION 2018 / EN. gedore.com BASIC TOOL SET in case, 74 pieces
MOBILITY SELECTION 2018 / EN NEW 1041-1 BASIC TOOL SET in case, 74 pieces 429,. 1110 WMW-S-03 TOOL ASSORTMENT for WORKMO B3 110 pieces 1549, gedore.com MOBILITY GEDORE WORKMO THE MOBILE ORDERLY ARRANGEMENT,
More informationTOOLS WITH HORSEPOWER
THE AUTOMOTIVE & ENGINEERING RANGE INCLUDES Files Spanners Wrenches C.K SURE DRIVE Socket Sets & Accessories 4 Square Drive 8 Bi-Hex Sockets & Accessories 2 Bi-Hex Sockets & Accessories Other Socket Sets
More informationSERIES 450 TABLES. MOD CHROMED LEGS Legs: chromed steel tube diam. 60 mm with adjustable feet.
SERIES 450 TABLES MOD. 450020 TABLE 20 Dimension: 80x50x76 h. 12 kg. 0,04 cu.m. MOD. 450092 CHROMED LEGS Legs: chromed steel tube diam. 60 mm with adjustable feet. MOD. 450045 TABLE 24 mm thick. with rounded
More informationThe best choice for those people who search practicality and reliability.
The best choice for those people who search practicality and reliability. Air screwdrivers/nutrunners with slip clutch and with external slip clutch adjustment Straight, pistol and angle models Torque
More informationLaboratory. Safety is a matter of cleanliness even in chairs.
Safety is a matter of cleanliness even in chairs. 88 89 The ideal attributes for any laboratory Pharmaceuticals Chemical engineering Sophisticated seating solutions for your laboratory work imposes unique
More informationUsed for installation and dismantling designs such as pipes of almost any diameter. Handle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 6" Chain: 18" (400mm) JTC-1149 20" CHAIN WRENCH Used for installation and dismantling
More informationRIDGID Wrenches 1.1. Page. Wrench Type
RIDGID Wrenches Time-tested designs. Often imitated, never duplicated. Efficient designs to improve productivity. Innovative to provide new solutions to old problems. Wrench Type of Nom. s Size (in.) (in.)
More informationsocket bits Sonic offers you a wide variety of socket bits pozidrive slotted slotted one piece
socket bits Sonic offers a complete range of different socket bits. The socket bits are made of outstanding chrome vanadium quality and meet or exceed din standards. these sonic socket bits have Also a
More informationTools. That. Work. Catalogue. Proudly Distributed by:
Tools That Work 2019 Catalogue EFFECTIVE 1 ST November 2018 Proudly Distributed by: For the past 50 years, Bondhus has established itself within the market as the premium hex key supplier for both quality
More informationDental Art presents Alchemist
Innovative design, state of the art materials, eye for detail, attention to safety and hygiene, made in Italy. All this, together with our commitment to meet clients requirements - supporting them at all
More informationTorque Screwdriver Models 1.5 N.m to 6 N.m (13 lbf.in to 53 lbf.in) Adjustables - N.m Adjustables - lbf.in Production P Type
Torque Screwdriver s 1.5 N.m to 6 N.m (13 lbf.in to 53 lbf.in) Norbar s new range of Torque Screwdrivers embodies the values of the TT series: accuracy, ease of use and comfort in use.with an accuracy
More informationORGANIZED TOOLS SAVE TIME AND MONEY EVA Trays Feature a Custom Cut Contrast Soft Foam to Keep Your Tools Organized
HAND TOOLS ORGANIZED TOOLS TIME AND MONEY EVA Trays Feature a Custom Cut Contrast Soft Foam to Keep Your Tools Organized 80 Piece 1/4" Ratchet and Socket Set in EVA Foam Tray 08760 282 Features a 90 Tooth
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationSolutions for power transmission. CTS AK-yksiköt.
Solutions for power transmission CTS AK-yksiköt www.konaflex.fi AKR20 New generation linear guides AK208R The AK range meets the market s need for a guide that is compact, high quality, versatile, and
More information