STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

Size: px
Start display at page:

Download "STATE OF MINNESOTA PRICE PAGE (Typed Response Required)"

Transcription

1 SPEC # T-628(5) Tractors, Ag Type Factory Attach. PLEASE PURCHAS Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Trueman Welters Seth Strehler 1600 Highway 55 East Buffalo, Mn STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used: October, 2016 Spec # Information Requested Answer 1.0 Tractor Catalog Section Price List Title: Farmall Compacts Date & I.D. of Price List: October 1,2016 Percentage Discount to be applied to Price List: 28 percent 1.1 Price for manuals, (service, parts, repair, and operations) $1, Price for set of fluid and air filters $ PERFORMANCE/EXTENDED WARRANTY OPTIONS Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc. (Specify years, miles or hours extended term covers.) 2.1 CVT Compacts 24 month/ 2000 hours $ 2.2 NON- CVT Compacts 24 month/ 750 hours $ 3.0 INSTALLATION - PER HOUR $99.00 Installation services may be requested on an "as needed" basis. See Special Terms and Conditions 4.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: $ If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 6.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES See Special Terms and Conditions 7.0 DELIVERY Starting Point: City, State, ZIP: Buffalo, MN Charge Per Loaded Mile: $2.50 See Special Terms and Conditions - No flat rate allowed

2 AGRICULTURAL EQUIPMENT U.S. Price List Effective October 1, 2016 FARMALL SERIES COMPACT TRACTORS PL 100 CA REVISION 2 SAP PRICE LIST 030 C1 THIS IS A COMPLETE REVISION Copyright 2016 By CNH Industrial America LLC

3 FARMALL SERIES COMPACT TRACTORS TABLE OF CONTENTS COMPACT TRACTORS LOADERS FOR FARMALL COMPACT TRACTORS

4 FARMALL SERIES COMPACT TRACTORS TABLE OF CONTENTS COMPACT TRACTORS IMPLEMENTS AND ATTACHMENTS

5 FARMALL SERIES COMPACT TRACTORS TABLE OF CONTENTS COMPACT TRACTORS IMPLEMENTS AND ATTACHMENTS CHARTS

6

7 -T0CV 01 COMPACT FARMALL A SERIES II TRACTOR Standard Equipment DIESEL ENGINE: TRANSMISSION OPTIONS Farmall 35A Tier 4B: 12 x 12 Synchronized Shuttle Shift 35 Gross Engine 2600 rpm (SSS) 29.7 PTO 2600 rpm (Gear) Left-hand, dash mounted, 28 PTO 2600 rpm (Hydro) synchronized shuttle 114 cu. in.(1.9l) Displacement (4) Non-synchronized gears (3) Non-synchronized ranges Farmall 40A Tier 4B: 40 Gross Engine 2600 rpm 3-Range Hydrostatic with Cruise Control 34 PTO 2600 rpm (Gear) and Dual-Pedal direction control for 22 PTO 2600 rpm (Hydro) forward and reverse 114cu. in. (1.9L) Displacement HYDRAULIC SYSTEM: ALL MODELS Open Center Hydraulic System 3 Cylinder,Turbcharged Engine Dual Gear-type Pumps Common Rail / Direct Fuel Injection Implement Pump Capacity: Tier 4b Final Emissions Compliant - Farmall 35A = 8.2 gpm (31.2 L/min) cu. in. (1.9L) Displacement - Farmall 40A = 8.2 gpm (31.2 L/min) Under Hood Muffler / Exhaust Steering Pump Capacity: Two-stage Dual Element Air Cleaner - Gear models = 4.8 gpm (18.2 L/min) Full-flow, Spin-on Oil Filter - HST models = 4.8 gpm (18.2 L/min) Fuel Filter with water separator Mid-mount Hydraulic Valve & Joystick Quick Glow Plug Starting Aid (STD) Flip-up Hood w/ Gas Strut 7.4(28L) gallon Fuel Tank 3-POINT LIFT SYSTEM: Lift ball ends: INSTRUMENT PANEL: 1808 lb. (820 kg) Analog Tachometer Category I, 3-point Linkage Fuel Gauge Position Control Lever Coolant Temperature Gauge Drop Rate Control Knob Hour Meter Crank-type Leveling Mechanism Engine Oil Pressure Warning Light Telescoping Stabilizers Battery Charge Warning Light Fixed Link Ends Cold Starting Aid Indicator Light PTO ON Indicator Light ROPS: Constant Engine Speed control 2-Post, Foldable Roll Bar Parking Brake Indicator Light Seat Belt Turn Indicator Lights Hazard Flasher Indicator Lights ELECTRICAL High Beam Headlights Indicator 12-volt, 80Ah, 660 CCA Battery Emmision Activation Indicator Safety Start Switch Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System 1 of 109 -T0CV OCT-16

8 -T0CV 01 COMPACT FARMALL A SERIES II TRACTOR Standard Equipment LIGHTING: FRONT AXLE: (2) Incondescent Corner Work Lights Mechanical Front Drive (MFD) (2) Halogen Headlights Fixed Position Rims (2) Taillights / Brakelights 47.1 in. (1197 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 tires only - Independent 540 rpm Fixed Position Rims - R3, R4 tires - Electro-hydraulic engagement 52.5 in. (1333 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap OPERATOR'S AREA: Mid mount PTO Contoured Cushion Seat - MID PTO is STANDARD on models with - Fore / Aft / Height / Weight HYROSTATIC TRANSMISSION Compensating - Mid PTO is OPTIONAL on models with Foot Throttle gear tansmission Left Side Step -Independent 2000 rpm Left Side Grab Handle Right Side Cupholder & Tray DRAWBAR: Swinging SLOW MOVING VEHICLE EMBLEM 3-Position Extendable REAR DIFFERENTIAL LOCK Foot actuated mechanical STEERING: Hydrostatic Power Steering Tilt Steering Column BRAKES: Wet Disc Dual Brake Pedals Foot-assist Parking Brake Lever 2 of 109 -T0CV OCT-16

9 -T0CV 01 COMPACT FARMALL A SERIES II TRACTOR Models COMMERCIAL MODEL ENGINE POWER Weight Factory Data List Price FARMALL 35A SERIES II 35 HP P53 $20, FARMALL 40A SERIES II 40 HP P36 $22, Factory Supplied Options Order Code Description Weight Factory Data List Price TRANSMISSION SD_T2810 TRANSMISSION x 12 Synchro-shuttle No Charge Hydrostatic Transmission Includes Mid PTO for operation of Front mounted implements (mowers, snow blowers, brooms, etc.) P92 $1, HYDRAULICS SD_T8270 REAR REMOTES XT8270X LESS REAR REMOTE VALVES Less Rear Remote Valves Remote SDA 1 Rear Remote with detent No Charge P37 $ PTO MID-MOUNT PTO SD_T8073 MID PTO KIT MID PTO For (720110) 12 x 12 Synchro-shuttle Transmission only XT8073X LESS MID PTO For (720110) 12 x 12 Synchro-shuttle Transmission only P64 $ No Charge 3 of 109 -T0CV OCT-16

10 -T0CV 01 COMPACT FARMALL A SERIES II TRACTOR FRONT WHEELS AND TIRES SD_T4940 FRONT WHEELS AND TIRES x PR R4 No Charge Must be ordered with 43 x R4 ( ) Rear Tires x 14 6PR R1 Ag Bar (900088P55) ($115.00) Must be ordered with 11.2 x 24 4PR R1 Ag Bar ( ) Rear Tires x PR R3 T (900088P55) ($115.00) REAR WHEELS AND TIRES SD_T4950 REAR WHEELS AND TIRES x R4 No Charge x 24 4PR R1 Ag Bar (900214P83) ($279.00) x PR R P61 $ OPERATOR MANUALS SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge French Canadian - Gear No Charge SD_T9802 OPERATORS MANUAL XT9802X Less Add'l Operator Manual No Charge SPANISH OP.MANUAL N No Charge 4 of 109 -T0CV OCT-16

11 -T0CV 01 COMPACT FARMALL A SERIES II TRACTOR Factory Supplied Attachments Order Code Description Weight Factory Data List Price X14 6PR R1 CIH LSM 95 LB P37 $ Front X24 4PR R1 CIH LSM 343 LB P21 $ Rear X PLY TURF R3 Front 98 LB P45 $ X PR R3 TURF CIH LS Rear 347 LB P53 $1, X PR R4 CIH LSM Front 107 LB P92 $ X PLY TL R4 CIH Rear 418 LB P53 $1, of 109 -T0CV OCT-16

12 6 of 109

13 -T0CU 01 FARMALL 35C AND 40C SERIES II TRACTORS (Ex Works Port of Entry) Standard Equipment Farmall 35C Tier 4B: TRANSMISSION OPTIONS 35 Gross Engine 2600 rpm 12 x 12 Synchronized Shuttle Shift 29.7 PTO 2600 rpm (Gear) (SSS) 28 PTO 2600 rpm (Hydro) Left-hand, dash mounted, cu. in. (1.9L) Displacement synchronized shuttle (4) Synchronized gears Farmall 40C Tier 4B: (3) Non-synchronized ranges 40 Gross Engine 2600 rpm 34 PTO 2600 rpm (Gear) 3-Range Hydrostatic with Cruise Control 32 PTO 2600 rpm (Hydro) and Dual-Pedal direction control for cu. in. (1.9L) Displacement forward and reverse ALL MODELS: HYDRAULIC SYSTEM: 3 Cylinders Open Center Hydraulic System Tier 4b compliant Dual Gear-type Pumps Turbo charged Single Open Center Rear Remote Valve Under Hood Muffler / Exhaust Implement Pump Capacity: Two-stage Dual Element Air Cleaner - Farmall 35C = 8.2 gpm (31.2 L/min) Full-flow, Spin-on Oil Filter - Farmall 40C = 8.2 gpm (31.2 L/min) 10.6 gallon (40L) Fuel Tank ROPS Steering Pump Capacity: 12.4 gallon (47L) Fuel Tank CAB - Gear models = 4.1 gpm (15.6 L/min) Fuel Filter with water separator - HST models = 5.5 gpm (20.8 L/min) Quick Glow Plug Starting Aid Mid-mount Hydraulic Valve & Joystick Flip-up Hood w/ Gas Strut (STD) INSTRUMENT PANEL: 3-POINT LIFT SYSTEM: Analog Tachometer Lift ball ends: Fuel Gauge 1808 lb. (820 kg) Coolant Temperature Gauge Category I, 3-point Linkage Hour Meter Position Control Lever Engine Oil Pressure Warning Light Drop Rate Control Knob Battery Charge Warning Light Crank-type Leveling Mechanism Cold Starting Aid Indicator Light Telescoping Stabilizers PTO ON Indicator Light Flexible Link Ends Constant Engine Speed control Parking Brake Indicator Light ROPS: Turn Indicator Lights 2-Post, Foldable Roll Bar Hazard Flasher Indicator Lights Seat Belt High Beam Headlights Indicator Emmision Activation Indicator ELECTRICAL 12-volt, 80Ah, 660 CCA Battery Safety Start Switch Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System 7 of 109 -T0CU OCT-16

14 -T0CU 01 FARMALL 35C AND 40C SERIES II TRACTORS (Ex Works Port of Entry) Standard Equipment REAR AXLE: (Continue): LIGHTING: 46.5 in. (1283 mm) Tread Setting with (2) Halogen Corner Work Lights R4 tires (2) Halogen Headlights (2) Taillights / Brakelights OPERATOR'S AREA: (2) Flashing Warning Lights / Turn ROPS FOR 35C Signals Contoured Cushion Seat - Fore / Aft / Height / Weight PTO: Compensating Rear PTO - Spring Suspension - Independent 540 rpm Deluxe Floor Mat - Electro-hydraulic engagement Foot Throttle - Flip-up Shield Left Side Step - Shaft Cap Left Side Grab Handle Mid PTO Right Side Cupholder & Tray - Mid PTO is STANDARD on ALL models - Independent 2,000 rpm CAB FOR 40C ONLY (2) Doors DRAWBAR: Rear Window Opens 63 degrees Swinging Opening side windows 2-Position Extendable Air Conditioning Heater REAR DIFFERENTIAL LOCK 4-speed Fan Control for heat and A/C 2 Cab Air Filters STEERING: Radio-ready with (2) speakers, wiring Hydrostatic Power Steering and antenna Tilt Steering Column Deluxe Cloth Covered Seat Floor Mat BRAKES: Cloth Covered Headliner Wet Disc Sun Visor Dual Brake Pedals Interior Rearview Mirror Foot-assist Parking Brake Lever Interior lighting Left and Right External Mounted Mirrors FRONT AXLE: Removable Plug in rear of cab to route Four Wheel Drive (FWD) harness Fixed Position Rims Front Windshield Wiper and Washer 45.6 in. (1159 mm) Tread Setting with Cup Holder R4 tires Left and Right Side Steps Toolbox REAR AXLE: Slow Moving Vehicle Emblem Flange Type Axle Grab Rails Reversible Position Rims - R1 tires only Horn Fixed Position Rims - R3, R4 tires SLOW MOVING VEHICLE EMBLEM 8 of 109 -T0CU OCT-16

15 -T0CU 01 FARMALL 35C AND 40C SERIES II TRACTORS (Ex Works Port of Entry) Models COMMERCIAL MODEL VERSION Weight Factory Data List Price FARMALL 35C SERIES II Rops P67 $25, FARMALL 40C SERIES II Cab 6,300 LB P91 $31, Factory Supplied Options Order Code Description Weight Factory Data List Price TRANSMISSION TRANSMISSION SD_T2810 TRANSMISSION x 12 Synchro-shuttle Includes Mid PTO for operation of Front mounted implements (mowers, snow blowers, brooms, etc.) Hydrostatic Transmission Includes Mid PTO for operation of Front mounted implements (mowers, snow blowers, brooms, etc.) No Charge P28 $1, HYDRAULICS SD_T8270 REAR REMOTES X82704X 1 VALVE STD 1 valve with detent standard Remote Valves 2 rear remote No Charge P24 $ FRONT WHEELS AND TIRES SD_T4940 FRONT WHEELS AND TIRES x PR R4 No Charge Must be ordered with 43 x R4 Rear Tires ( ) x PR R3 T (900088P55) ($115.00) x 14 6PR R1 Ag Bar Must be ordered with 11.2 x 24 4PR R1 Ag Bar Rear Tires ( ). (900088P55) ($115.00) 9 of 109 -T0CU OCT-16

16 -T0CU 01 FARMALL 35C AND 40C SERIES II TRACTORS (Ex Works Port of Entry) REAR WHEELS AND TIRES SD_T4950 REAR WHEELS AND TIRES x R4 No Charge x 24 4PR R1 Ag Bar (900244P09) ($317.00) x PR R3 if ENGINE POWER is 40 HP P46 $ if ENGINE POWER is 35 HP P46 $ OPERATOR MANUALS SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge French Canadian - Gear No Charge SD_T9802 OPERATORS MANUAL XT9802X Less Add'l Operator Manual No Charge SPANISH OP.MANUAL N No Charge 10 of 109 -T0CU OCT-16

17 -T0CU 01 FARMALL 35C AND 40C SERIES II TRACTORS (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price X14 6PR R1 CIH LSM 95 LB P37 $ Front X24 4PR R1 CIH LSM 343 LB P21 $ Rear X PLY TURF R3 Front 98 LB P37 $ X PR R3 TURF CIH LS Rear 344 LB P53 $1, x PR CIH LSM Front 109 LB P92 $ X PLY TL R4 CIH Rear 420 LB P53 $1, of 109 -T0CU OCT-16

18 12 of 109

19 -T0CU 02 FARMALL 45C AND 55C SERIES II TRACTORS (Ex Works Port of Entry) Standard Equipment Farmall 45C Tier 4B: TRANSMISSION OPTIONS: 45 Gross Engine 2600 rpm 16 x 16 Synchronized Shuttle Shift 38.2 PTO 2600 rpm (Gear) (SSS) 36 PTO 2600 rpm (Hydro) Left-hand, dash mounted, cu. in. (1.9L) Displacement synchronized shuttle (4) Synchronized gears Farmall 55C Tier 4B: (4) Non-synchronized ranges 55 Gross Engine 2600 rpm 46.7 PTO 2600 rpm (Gear) 3- Range Hydrostatic with Cruise Control 44 PTO 2600 rpm (Hydro) and Dual Pedal direction control for cu. in. (1.9L) Displacement forward and reverse HYDRAULIC SYSTEM: ALL MODELS: Open Center Hydraulic System 3 Cylinders Dual Gear-type Pumps Naturally Aspirated Single Open Center Rear Remote Valve Under Hood Muffler / Exhaust Implement Pump Capacity: Two-stage Dual Element Air Cleaner gpm (31.2 L/min) Full-flow, Spin-on Oil Filter Steering Pump Capacity: 10.5 gallon (40L) Fuel Tank - Gear models = 4.1 gpm (15.6 L/min) Fuel Filter with water separator - HST models = 6.1 gpm (23.4 L/min) Quick Glow Plug Starting Aid Mid-mount Hydraulic Valve & Joystick Flip-up Hood w/ Gas Strut (STD) INSTRUMENT PANEL: 3-POINT LIFT SYSTEM: Analog Tachometer Lift ballk ends: Fuel Gauge 2756 lb. (1250 kg) Coolant Temperature Gauge Category I, 3-point Linkage Hour Meter Position Control Lever Engine Oil Pressure Warning Light Drop Rate Control Knob Battery Charge Warning Light Crank-type Leveling Mechanism Cold Starting Aid Indicator Light Telescoping Stabilizers PTO ON Indicator Light Flexible Link Ends Constant Engine Speed control Parking Brake Indicator Light ROPS: Turn Indicator Lights 2-Post, Foldable Roll Bar Hazard Flasher Indicator Lights Seat Belt High Beam Headlight Indicator Emmisions Indicator ELECTRICAL: 12-volt, 80Ah, 660 CCA Battery Safety Start Switch Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System 13 of 109 -T0CU OCT-16

20 -T0CU 02 FARMALL 45C AND 55C SERIES II TRACTORS (Ex Works Port of Entry) Standard Equipment LIGHTING: FRONT AXLE: (2) Halogen Corner Work Lights Four Wheel Drive (FWD) (2) Halogen Headlights Fixed position rims (2) Taillights / Brakelights 51.7 in. (1314 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 only - Independent 540 rpm Fixed Position Rims - R3, R4 - Electro-hydraulic engagement 47.7 in. (1211 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap Mid PTO OPERATOR'S AREA: - Mid PTO is STANDARD on ALL models Contoured Cushion Seat - Independent 2,000 rpm - Fore / Aft / Height / Weight Compensating DRAWBAR: - Spring Suspension Swinging Deluxe Floor Mat 2-Position Extendable Foot Throttle Left Side Step REAR DIFFERENTIAL LOCK Left Side Grab Handle Right Side Cupholder & Tray STEERING: Hydrostatic Power Steering SLOW MOVING VEHICLE EMBLEM Tilt Steering Column BRAKES: Wet Disc Dual Brake Pedals Foot-assist Parking Brake Lever 14 of 109 -T0CU OCT-16

21 -T0CU 02 FARMALL 45C AND 55C SERIES II TRACTORS (Ex Works Port of Entry) Models COMMERCIAL MODEL VERSION Weight Factory Data List Price FARMALL 45C SERIES II Rops 6,300 LB P59 $31, FARMALL 45C SERIES II Cab 6,300 LB P61 $36, FARMALL 55C SERIES II Rops 6,300 LB P24 $37, FARMALL 55C SERIES II Cab 6,300 LB P26 $43, Factory Supplied Options Order Code Description Weight Factory Data List Price TRANSMISSION TRANSMISSION SD_T2810 TRANSMISSION x16 Synchro Shuttle Includes Mid PTO for operation of Front mounted implements (mowers, snow blowers, brooms, etc.) HST + 3 Range Includes Mid PTO for operation of Front mounted implements (mowers, snow blowers, brooms, etc.) No Charge P28 $1, HYDRAULICS SD_T8270 REAR REMOTES X82704X 1 VALVE STD 1 valve with detent standard Remote Valves 2 rear remote No Charge P24 $ FRONT WHEELS AND TIRES SD_T4940 FRONT WHEELS AND TIRES x PR R4 No Charge Must be ordered with 17.5Lx24 6PR R4 Rear Tires ( ) x PR R3 T (900102P41) ($133.00) x 16 4PR R1 Must be ordered with PR R1 Rear Tires ( ). (900102P41) ($133.00) 15 of 109 -T0CU OCT-16

22 -T0CU 02 FARMALL 45C AND 55C SERIES II TRACTORS (Ex Works Port of Entry) REAR WHEELS AND TIRES SD_T4950 REAR WHEELS AND TIRES Lx24 6PR R4 No Charge PR R1 (900624P47) ($811.00) x PR R3 if ENGINE POWER is 55 HP (900336P49) ($437.00) if ENGINE POWER is 45 HP (900336P49) ($437.00) OPERATOR MANUALS SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge French Canadian - Gear No Charge SD_T9802 OPERATORS MANUAL XT9802X Less Add'l Operator Manual No Charge SPANISH OP.MANUAL N No Charge 16 of 109 -T0CU OCT-16

23 -T0CU 02 FARMALL 45C AND 55C SERIES II TRACTORS (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price PR R1 CIH LSM Front 171 LB P66 $ X24 4PR R1 CIH LSM Rear 298 LB P01 $1, X PLY TURF R3 Front 152 LB P05 $ X PR R3 TURF CIH LS Rear 344 LB P53 $1, X PR R4 LSM CIH Front 177 LB P07 $ LX24 6PR R4 CIH Rear 581 LB P02 $1, of 109 -T0CU OCT-16

24 18 of 109

25 -T0CN 01 FARMALL 45C/55C CVT TRACTORS - T4 (Ex Works - See Standard Equipment) Standard Equipment MODELS: TRANSMISSION: (continued) Farmall 45C CVT Single pedal for speed control 45.1 Gross Engine 2600 rpm Electronic Adjustable Speed & Response 46.0 Gross Engine rpm settings 34.1 PTO 2400 rpm HYDRAULICS: Farmall 55C CVT Open Center Hydraulic System 53.0 Gross Engine 2600 rpm Dual Gear-type Pumps 54.0 Gross Engine rpm Implement Pump Capacity: 41.2 PTO 2400 rpm ROPS 9.7 gpm (36.9 L/min) 40.4 PTO 2400 rpm CAB Steering Pump Capacity: 5.1 gpm (21.0 L/min) ENGINE: Mid-mount Hydraulic Ports FPT Engine Model R7531E4 MMV Standard cu. in. (2.2L) Displacement 3 Cylinders HITCH: Tier 4b Compliant Lift 24 in. behind link ends: Turbo-charged 2800 lb. (1270 kg) Under Hood Exhaust Category I, 3-point Linkage Two-stage Dual Element Air Cleaner Position Control Lever Full-flow, Spin-on Oil Filter Drop Rate Control Knob 13 gallon (49.2 L) Fuel Tank Crank-type Leveling Mechanism Fuel Filter with water separator Telescoping Stabilizers Quick Glow Plug Starting Aid Flexible Link Ends Flip-Up Hood ELECTRICAL: INSTRUMENT PANEL: 12-volt, 850 CCA Battery Analog Tachometer Safety Start Switch Fuel Gauge Key Start/Fuel Shutoff Coolant Temperature Gauge Alternator Hour Meter 75 amp - ROPS models Engine Oil Pressure Warning Light 90 amp - CAB models Battery Charge Warning Light Operator Presence System Status Indicator Lights 12-volt DC (10 amp) Auxiliary Power Digital display panel outlet TRANSMISSION: LIGHTING: Continuously Variable Cab / ROPS Transmission (CVT) Series II (2) Halogen Corner Work Lights Cruise Control (2) Halogen Headlights (high/low beam) Steering Column mounted shuttle lever (2) Taillights for FWD/REV directional control (2) Flashers / Turn Signals Cab Only (2) Front-mounted Cab Work Lights (2) Rear-mounted Cab Work Lights 19 of 109 -T0CN OCT-16

26 -T0CN 01 FARMALL 45C/55C CVT TRACTORS - T4 (Ex Works - See Standard Equipment) Standard Equipment ROPS PLATFORM: PTO: Deluxe Viny Covered Seat Rear Full suspension with weight Independent 540 rpm adjustability Flip-up Shield Fore/Aft/ Swivel adjustment Shaft Cap Floor Mat Mid PTO Cup Holder 2,000 RPM Left and Right Side Steps Toolbox DRAWBAR: Slow Moving Vehicle Emblem Swinging 2-Position Extendable CAB PLATFORM: (2) Doors REAR DIFFERENTIAL LOCK Rear Window Opens 35 degrees High Visibility Panel in Roof above STEERING: Windshield Hydrostatic Power Steering Air Conditioning Tilt and Telescoping Steering Column Heater 3-speed Fan Control for heat and A/C BRAKES: Single Cab Air Filter Wet Disc Radio-ready with (2) speakers, wiring Parking Brake Lock Lever and antenna Left Side Mounted Suspended Brake Deluxe Cloth Covered Seat Pedals Full suspension with weight adjustability FRONT AXLE: Fore/Aft/ Swivel adjustment Four Wheel Drive (FWD) Floor Mat Fixed Position Rims Cloth Covered Headliner 52.5 in. (1334 mm) Tread Setting with Adjustable Sun Visor R4 tires Interior Rearview Mirror Left and Right External Mounted Mirrors FRONT TIRES: Removable Plug in rear of cab to route PR R4 industrial bar tread harness Front Windshield Wiper and Washer REAR AXLE: Cup Holder Flange-type Axle Left and Right Side Steps Adjustable Position Rims - R1 Toolbox Fixed Rims - R3, R4, Galaxy Slow Moving Vehicle Emblem 55.3 in. to 67.4 in. ( mm) Tread Setting with R4 tires WARRANTY: Full Coverage - 24 months or 2000 REAR TIRES: hours 17.5LX24 6PR R4 tread Powertrain - 36 months or 2000 hours 20 of 109 -T0CN OCT-16

27 -T0CN 01 FARMALL 45C/55C CVT TRACTORS - T4 (Ex Works - See Standard Equipment) Models COMMERCIAL MODEL FARMALL 45C CVT T4 ROPS FARMALL 45C CVT T4 CAB FARMALL 55C CVT T4 ROPS FARMALL 55C CVT T4 CAB VERSION ENGINE POWER Weight Factory Data List Price Rops 45 HP 6,239 LB P27 $35, Cab 45 HP 6,239 LB P64 $44, Rops 53HP 6,239 LB P31 $39, Cab 53HP 6,239 LB P60 $47, Factory Supplied Options Order Code Description Weight Factory Data List Price OPERATOR STRUCTURE SD_05109 ARMREST X5109X No Armrest No Charge Armrests P83 $79.00 SD_T9162 RADIO/RADIO READY XT9162X Standard Less Radio No Charge AM/FM Stereo Radio AM/FM Radio with MP3 port Not Available on Rops Models P55 $ ENGINE STARTING AID SD_T9940 MKT PACK.FOR COLD C L/ MKT PACK F COLD C No Charge ADV MKT PK F/COLD CL Cold weather pkg includes - engine heater, transmission heater, fuel heater, and engine CCV heater. Cab version will also include: Rear windshield wiper & washer and added rear window strut. if VERSION is Rops P49 $ if VERSION is Cab P53 $ of 109 -T0CN OCT-16

28 -T0CN 01 FARMALL 45C/55C CVT TRACTORS - T4 (Ex Works - See Standard Equipment) HYDRAULICS SD_T8270 REAR REMOTES XT8270X LESS REAR REMOTE VALVES No Charge Remote DA 1 Rear remote: 1st position rear remote - float & detent valve P99 $ Aux.Hydr.:1 S/D 1 2 Rear remotes: 1st position rear remote - float & detent 2nd position rear remote - 3 position detent valve (no float) P98 $1, FRONT WHEELS AND TIRES SD_T4940 FRONT WHEELS AND TIRES PR R4 Ind. Bar Must be ordered with 17.5Lx24 6PR R4 ( ) Rear Tires x PR R3 Turf Must be ordered with 44 x PR R3 Turf ( ) Rear Tires PR R1(Ag Bar) Must be ordered with PR R1 Ag Bar ( ) Rear Tires /12LL x 15 6PR Galaxy Tires Must be ordered with 22.5LL x PR R3 Galaxy ( ) Rear Tires Galaxy tires are NOT compatible with Front-End Loader, Front Attachments or Mid Mount Mowers No Charge (900117P81) ($153.00) (900117P81) ($153.00) P53 $89.00 REAR WHEELS AND TIRES SD_T4950 REAR WHEELS AND TIRES Lx24 6PR R4 No Charge x PR R3 Turf (900318P01) ($413.00) PR R1 Ag Bar (900301P84) ($392.00) LL x PR R3 Galaxy Galaxy tires are NOT compatible with front-end loader, front attachments or mid mount mowers P52 $ OPERATOR'S MANUAL SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge French Canadian No Charge 22 of 109 -T0CN OCT-16

29 -CP9J 01 L340A LOADER FOR 35A AND 40A SERIES II (Ex Works Port of Entry) Standard Equipment L340A SPECIFICATIONS L340A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L340A Loader includes the following: L340A (For Farmall 35A & 40A Series II) Basic Loader for Farmall 35A & 40A Distances in (in/mm) unless Series II tractors otherwise noted. Forces in (lbs/kg) with Improved Visibility mounting unless otherwise noted. system (like L350A) Curved Boom, Mid-Mount, Quick Mounting Kit Attach Design Quick Coupler - Skid Steer Style Maximum Lift Height: 68" HD Material Bucket (Quick Attach) 98.4 / 2500 (Mid-mount valve & Joystick are Dump Clearance: included with tractor) 75.3 / 1913 Digging Depth: Loader specifications are subject to 8 / 203 change and may vary based on tractor Lift bucket pivot point: model and tire size / 567 Lift 19.7 in. (500mm) from bucket pivot point: 890 / 404 Breakout bucket pivot point: 2700 / 1225 Breakout 19.7 in. (500mm) from bucket pivot point: 1900 / 862 Maximum Lift: 31 / 787 Bucket Rollback: 32 Bucket Dump Angle: 39 Bucket Level Indicator Parking Stand NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for recommended counterweighting. 23 of 109 -CP9J OCT-16

30 -CP9J 01 L340A LOADER FOR 35A AND 40A SERIES II (Ex Works Port of Entry) Models COMMERCIAL MODEL SPECIALTY Weight Factory Data List Price L340A 35A/40A SERIES II 68 in. Bucket P78 $5, of 109 -CP9J OCT-16

31 -CP9J 01 L340A LOADER FOR 35A AND 40A SERIES II (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Other Equipment Ballast box 1000 Lb Max (Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required. 169 LB P25 $ LB P42 $ of 109 -CP9J OCT-16

32 26 of 109

33 -CP9J 02 L350A LOADER FOR 35C AND 40C SERIES II (Ex Works Port of Entry) Standard Equipment L350A SPECIFICATIONS L350A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L350A Loader includes the following: L350A (For Farmall 35C and 40C Series II ) Basic Loader for Farmall 35C and Distances in (in/mm) unless Farmall 40C Series II with Improved otherwise noted. Forces in (lbs/kg) Visibility mounting system. unless otherwise noted Mounting Kit Curved Boom, Mid-Mount, Quick Quick Coupler - Skid Steer Style Attach Design 68" HD Material Bucket (Quick Attach) Maximum Lift Height: (Mid-mount valve & Joystick are 105 / 2667 included with tractor) Dump Clearance: 81.5 / 2070 Loader specifications are subject to Digging Depth: change and may vary based on tractor 6.5 / 165 model and tire size. Lift bucket pivot point: 2000 / 19.7 in. (500mm) from bucket pivot point: 1540 / 699 Breakout bucket pivot point: 3540 / 19.7 in. (500mm) from bucket pivot point: 2640 / 1197 Maximum Lift: 33 / 838 Bucket Rollback: 30º Bucket Dump Angle: 58º 4-Bar Bucket Linkage Bucket Level Indicator, Parking Stand NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for 27 of 109 -CP9J OCT-16

34 -CP9J 02 L350A LOADER FOR 35C AND 40C SERIES II (Ex Works Port of Entry) Models COMMERCIAL MODEL SPECIALTY Weight Factory Data List Price L350A 35C/40C SERIES II 68 in. Bucket P02 $6, of 109 -CP9J OCT-16

35 -CP9J 02 L350A LOADER FOR 35C AND 40C SERIES II (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Ballast box 1000 Lb Max 169 LB P25 $ (Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required. 243 LB P42 $ of 109 -CP9J OCT-16

36 30 of 109

37 -CP9J 03 L360A LOADER FOR 45C AND 55C SERIES II (Ex Works Port of Entry) Standard Equipment L360A SPECIFICATIONS L360A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L360A for Farmall 45C and 55C Series II L360A (For Farmall 45C and 55C Series II) Basic Loader for Farmall 45C and Distances in (in/mm) unless Farmall 55C Series II with Improved otherwise noted. Forces in (lbs/kg) Visibility mounting system unless otherwise noted Mounting Kit Curved Boom, Mid-Mount, Quick Quick Coupler - Skid Steer Style Attach Design 72" HD Material Bucket (Quick Attach) Maximum Lift Height: (Mid-mount valve & Joystick are / 2852 included with tractor) Dump Clearance: 85.2 / 2164 Loader specifications are subject to Digging Depth: change and may vary based on tractor 4.9 / 125 model and tire size. Lift bucket pivot point: 2500 / 19.7 in. (500mm) from bucket pivot point: 1830 / 830 Breakout bucket pivot point: 5000 / 19.7 in. (500mm) from bucket pivot point: 3114 / 1412 Maximum Lift: 32 / 813 Bucket Rollback: 39º Bucket Dump Angle: 49º 4-Bar Bucket Linkage Bucket Level Indicator Parking Stand NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for 31 of 109 -CP9J OCT-16

38 -CP9J 03 L360A LOADER FOR 45C AND 55C SERIES II (Ex Works Port of Entry) Models COMMERCIAL MODEL SPECIALTY Weight Factory Data List Price L360A 45C/55C SERIES II 72 in. Bucket 650 LB P12 $6, of 109 -CP9J OCT-16

39 -CP9J 03 L360A LOADER FOR 45C AND 55C SERIES II (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Ballast box 1000 Lb Max 169 LB P25 $ (Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required. 243 LB P42 $ of 109 -CP9J OCT-16

40 34 of 109

41 -CP9J 04 L350A LOADER FOR B/C CVT (Ex Works Port of Entry) Standard Equipment L350A SPECIFICATIONS L350A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L350A Loader includes the following: L350A (For Farmall 45C CVT, 55C CVT, 40B CVT, 50 B CVT) Basic Loader for Distances in (in/mm) unless Farmall 45C CVT, 55C CVT, 40B otherwise noted. Forces in (lbs/kg) CVT, and 50B CVT unless otherwise noted with Improved Visibility mounting Curved Boom, Mid-Mount, Quick system. Attach Design Tractors S/N ZDME21931 and after. Maximum Lift Height: Quick Coupler - Skid Steer Style 105 / " HD Material Bucket (Quick Attach) Dump Clearance: 81.5 / 2070 FARMALL C CVT TRACTORS ARE Digging Depth: STANDARD LOADER READY 6.5 / 165 Lift Capacity Loader specifications are subject bucket pivot point: change and may vary based on tractor 2000 / 907 model and tire 19.7 in. (500mm) from bucket pivot point: 1540 / 699 Breakout bucket pivot point: 3540 / 19.7 in. (500mm) from bucket pivot point: 2640 / 1197 Maximum Lift: 33 / 838 Bucket Rollback: 30º Bucket Dump Angle: 58º 4-Bar Bucket Linkage Bucket Level Indicator, Parking Stand COMPATIBILITY INFORMATION: To assure proper performance, see Operator's manual for recommended counterweighting 35 of 109 -CP9J OCT-16

42 -CP9J 04 L350A LOADER FOR B/C CVT (Ex Works Port of Entry) Models COMMERCIAL MODEL SPECIALTY Weight Factory Data List Price L350A FARMALL B/C CVT 72 in. Bucket 650 LB P58 $5, of 109 -CP9J OCT-16

43 -CP9J 04 L350A LOADER FOR B/C CVT (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Ballast box 1000 Lb Max 169 LB P25 $ (Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required. 243 LB P42 $ of 109 -CP9J OCT-16

44 38 of 109

45 -CP1Z 01 MW SERIES MOWERS FOR COMPACT FARMALL (Ex Works Wholegoods Depot) Standard Equipment MW166S Side Discharge Mid- MW266S Side Discharge Mid-Mount Mount Rotary Mower Rotary Mower For use with For use with - Farmall 30B & 35B Tractors - Farmall 35A & 40A Series II SPECIFICATIONS: - Farmall 35C Series II NON CAB Cutting Width (in.) - 66 (not compatable with 40C Series II Cutting Height (in.) Cab) Overall width (in.) - discharge chute down 69 SPECIFICATIONS: Number of Blades - 3 Cutting Width (in.) - 66 Blade Type - Standard Cutting Height (in.) Blade Length/Width (in.) - 23 L x 2.5W Overall width (in.) - discharge chute Blade Tip Speed (in feet per minute) - down 69 Less than 18,000 (ANSI) Number of Blades - 3 Drive - Mid PTO Blade Type - Standard Gauge Wheels (in.) - 2 x 6 (4) Blade Length/Width (in.) - 23 L x 2.5W Deck Spring suspension - Yes Blade Tip Speed (in feet per minute) - Deck Shell Weldment - 10 gauge sides, Less than 18,000 (ANSI) 10 gauge top, 1/4" spindle Drive - Mid PTO reinforcement pads Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Tire Compatibility: Deck Shell Weldment - 10 gauge sides, Agricultural (R1) - Yes, limited turn 10 gauge top, 1/4" spindle angle: reinforcement pads Right Hand - 24 degrees, Left Hand - 27 degrees Tire Compatibility: Industrial (R4) - Yes, limited turn angle: For Farmall 35A and 40A Right Hand - 33 degrees, Left Hand - Agricultural (R1) - Yes, limited turn 37 degrees angle: Turf (R3) - Yes, limited turn angle: Right Hand - 33 degrees, Left Hand - Right Hand - 33 degrees, Left Hand - 37 degrees 37 degrees Industrial (R4) - Yes, limited turn angle: Galaxy Turf - NO Right Hand - 33 degrees, Left Hand - 37 degrees Mulch Kit - AMENHM628 (Service Parts) Turf (R3) - Yes, limited turn angle: Right Hand - 33 degrees, Left Hand - NOTE: 37 degrees REQIREMENTS FOR OPERATION Galaxy Turf - NO A mid PTO kit is required to operate this implement. SEE PTO OFFERING ON LAST PAGE OF THE STANDARD EQUPMENT 39 of 109 -CP1Z OCT-16

46 -CP1Z 01 MW SERIES MOWERS FOR COMPACT FARMALL (Ex Works Wholegoods Depot) Standard Equipment MW266S Side Discharge Mid-Mount SPECIFICATIONS (continue): Rotary Mower Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle Tire Compatibility: (continued) reinforcement pads For Farmall 35C Series II NON CAB Agricultural (R1) - NO MW172S Side Discharge Mid- Industrial (R4) - Yes, limited turn angle: Mount Rotary Mower (Continued): Right Hand - 33 degrees, Left Hand - 37 degrees Tire Compatibility: Turf (R3) - Yes, limited turn angle: Agricultural (R1) - NO Right Hand - 33 degrees, Left Hand - Large Industrial (R4) - YES 37 degrees Turf (R3) - Yes, limited turn angle: Galaxy Turf - NO Right Hand - 34 degrees, Left Hand - 35 degrees Mulch Kit - AMENHM628 (Service Parts) Galaxy Turf - NO NOTE: Mulch Kit - AMENHM728 (Service Parts) REQUIREMENTS FOR OPERATION A mid PTO kit is required to operate this NOTE: implement. SEE PTO OFFERING ON REQIREMENTS FOR OPERATION LAST PAGE OF THE STANDARD A mid PTO kit is required to operate this EQUPMENT implement. MW172S Side Discharge Mid- MW272S Side Discharge Mid- Mount Rotary Mower Mount Rotary Mower For use with For use with - Farmall 45C CVT & 55C CVT - Farmall 45C & 55C Series II Rops only - Farmall 40B CVT, 45B CVT, (not compatible with Cab) and 50B CVT SPECIFICATIONS: SPECIFICATIONS: Cutting Width (in.) - 72 Cutting Width (in.) - 72 Cutting Height (in.) Cutting Height (in.) Overall width (in.) - discharge chute Overall width (in.) - discharge chute down 85 down 85 Number of Blades - 3 Number of Blades - 3 Blade Type - Standard Blade Type - Standard Blade Length/Width (in.) - 25L x 2.5W Blade Length/Width (in.) - 25L x 2.5W Blade Tip Speed (in feet per minute) - Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Less than 18,000 (ANSI) Drive - Mid PTO Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle reinforcement pads 40 of 109 -CP1Z OCT-16

47 -CP1Z 01 MW SERIES MOWERS FOR COMPACT FARMALL (Ex Works Wholegoods Depot) Standard Equipment MW272S Side Discharge Mid- NOTES ABOUT MID PTO OFFERING Mount Rotary Mower (Continued): Compact Farmall A Series II Tire Compatibility: Agricultural (R1) - NO hyrdostatic tranmission version Large Industrial (R4) - NO tractors, Mid Mount PTO is included Turf (R3) - Yes, limited turn angle: as standard equipment. Right Hand - 34 degrees, Left Hand - 35 degrees transmission version tractors, Mid Galaxy Turf - NO PTO is optional. order tractor with factory installed Mulch Kit - AMENHM728 (Service Parts) Mid PTO or order MT through parts NOTE: REQIREMENTS FOR OPERATION Compact Farmall 30A and 35A (Prior A mid PTO kit is required to operate this Models) the PTO kit can implement. SEE PTO OFFERING ON only be ordered through CNHi Parts LAST PAGE OF THE STANDARD MT EQUPMENT Farmall C series II Mid Mount PTO is included as standard equipment on all models. Farmall C (Prior Models) the PTO kit can only be ordered through CNHi Parts 30C, 35C non-cab-mt C, 50C non-cab - MT Farmall B series the PTO kit can only be ordered through CNHi Parts 30B, 35B - MT B, 50B - MT CVT version tractors, Mid Mount PTO is included as standard equipment. 41 of 109 -CP1Z OCT-16

48 -CP1Z 01 MW SERIES MOWERS FOR COMPACT FARMALL (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL Weight Factory Data List Price MW266S FARMALL 30A/35A 443 LB P30 $3, MW266S FARMALL 30C/35C 443 LB P30 $3, MW272S FARMALL 40C/50C 443 LB P31 $3, MW172S FARMALL B/C CVT 620 LB P31 $3, MW166S FARMALL 30B/35B 443 LB P30 $3, MW166S FARMALL 40B/50B 443 LB P30 $3, MW172S FARMALL40B/50B 443 LB P31 $3, Factory Supplied Options Order Code Description Weight Factory Data List Price OTHER EQUIPMENT SD_15012 BALE RAMP AND AXLE X15012X No Ramp No Charge Ramp Kit P93 $ of 109 -CP1Z OCT-16

49 -CP1Z 01 MW SERIES MOWERS FOR COMPACT FARMALL (Ex Works Wholegoods Depot) Factory Supplied Attachments Order Code Description Weight Factory Data List Price CLS 3 RAMP KIT 40 LB P70 $ Ramp Kit CLS 2 40 LB P70 $ of 109 -CP1Z OCT-16

50 44 of 109

51 -CP1A 01 RR SERIES REAR MOUNT FINISHING MOWERS (Ex Works Wholegoods Depot) Standard Equipment RR60 - RIGID FRAME: RR144 - FLEX WING: Category I 3-point mounted Overall Cutting Width - 12 ft. (3.66m) Flex finishing mower Center Deck Cutting Width - 5 ft. (1.52m) Cutting Width: 60 inches (1524mm) Wing Deck Cutting Width - 4 ft. (1.22m) Discharge: Rear Deck Overlap - 6 in. (152 mm) Discharge Safety Chain Overall Width in. (3.71m) PTO HP Rating: Up to 30 Transport Width in. (2.54m) Drive Method: Rear 540 RPM PTO Maximum Overall Length in. Number of Blades: 3 (4.62m) Blade Drive: V-Belt Transport Length in. (4.5m) Blade speed (RPM): 2,630 Transport Height - 90 in. (2.29m) Cutting Height: 1 to 4 in. (25 to 101mm) Minimum HP - 30 (4) Solid Rubber Gauge Wheels Cutting Height Range - 1 to 5 in. (fully rotating) (25 to 127 mm) Blade Tip Speed (FPM) - 16,000 RR72 - RIGID FRAME: Caster Wheels (12) - 15x Category I 3-point mounted Transport Tires (2) - 26x finishing Mower Cutting Width: 72 inches (1829mm) RR180 - FLEX WING: Discharge: Rear Overall Cutting Width - 15 ft. (4.57m) Flex Discharge Safety Chain Center Deck Cutting Width - 6 ft. (1.83m) PTO HP Rating: Up to 40 Wing Deck Cutting Width - 5 ft. (1.52m) Drive Method: Rear 540 RPM PTO Deck Overlap - 6 in. (152 mm) Number of Blades: 3 Overall Width in. (4.62m) Blade Drive: V-Belt Transport Width in. (2.57m) Blade speed (RPM): 2,230 Maximum Overall Length in. (4.7m) Cutting Height: 1 to 4 in. (25 to 101mm) Transport Length in. (4.57m) (4) Solid Rubber Gauge Wheels Transport Height in. (2.54m) (fully rotating) Minimum HP - 35 Cutting Height Range - 1 to 5 in. RR90 - RIGID FRAME: (25 to 127 mm) Category I 3-point mounted Blade Tip Speed (FPM) - 16,000 finishing mower Caster Wheels (12) - 15x Cutting Width: 90 inches (2286mm) Transport Tires (2) - 26x Discharge: Rear Discharge Safety Chain PTO HP Rating: Up to 60 Drive Method: Rear 540 RPM PTO Number of Blades: 5 Blade Drive: V-Belt Blade speed (RPM): 2,630 Cutting Height: 1 to 4 in. (25 to 101mm) (4) Solid Rubber Gauge Wheels (fully rotating) 45 of 109 -CP1A OCT-16

52 -CP1A 01 RR SERIES REAR MOUNT FINISHING MOWERS (Ex Works Wholegoods Depot) Standard Equipment RR204 - FLEX WING: RR204 - FLEX WING: (continued) Overall Cutting Width - 17 ft. (5.18m) Flex Transport Length in. (4.78m) Center Deck Cutting Width ft. Transport Height in. (2.79m) (2.29m) Minimum HP - 40 Wing Deck Cutting Width - 6 ft. (1.83m) Cutting Height Range - 1 to 5 in. Deck Overlap - 12 in. (305 mm) (25 to 127 mm) Overall Width in. (5.26m) Blade Tip Speed (FPM) - 16,000 Transport Width in. (2.59m) Caster Wheels (12) - 15x Maximum Overall Length in. Transport Tires (2) - 26x (4.98m) 46 of 109 -CP1A OCT-16

53 -CP1A 01 RR SERIES REAR MOUNT FINISHING MOWERS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL Weight Factory Data List Price RR60 60 INCH MOWER 2,000 LB P45 $2, RR72 72 INCH MOWER 2,000 LB P16 $2, RR90 90 INCH MOWER 2,000 LB P30 $4, RR FT MOWER 3,000 LB P65 $16, RR FT MOWER 3,520 LB P42 $17, RR FT MOWER 3,520 LB P87 $19, of 109 -CP1A OCT-16

54 48 of 109

55 -CP1L 01 BM SERIES FRONT MOUNTED BLADES -BM1 (Ex Works - See Standard Equipment) Standard Equipment BM172H HEAVY DUTY: For use with - Series II 35A & 40A - Series II 35C & 40C - Series II 45C & 55C - Farmall 30A & 40A - Farmall 30C &35C - Farmall 40C & 50C - Farmall 45C CVT & 55C CVT - Farmall 40B CVT, 45B CVT, and 50B CVT Quick attach design Moldboard width: 72 inches (1830mm) Moldboard height: 22 inches (560mm) Reversible cutting edge Cutting edge thickness: 0.5 inch (12.7mm) Hydraulic angling Angling range: 0 to 30 degrees Adjustable skid shoes REQUIREMENTS FOR OPERATION: TRACTOR MUST BE EQUIPPED WITH MID MOUNT VALVE AND JOYSTICK in order to operate loaders, front mount brooms, front mount blades or front mount snow blowers. NOTE: Compact FARMALL A, B, & C Series tractors come equipped with Mid-mount valve and Joystick as standard equipment 49 of 109 -CP1L OCT-16

56 -CP1L 01 BM SERIES FRONT MOUNTED BLADES -BM1 (Ex Works - See Standard Equipment) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price BM172H FR BLADE CL3 BM172H 72IN HD FRNT 300 LB P34 $2, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAME AND HITCH SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge S-FRM CLS2 LS P54 $2, Implement Mounting Subframe For Series II 35A and 40A For Series II 35C, and 40C ROPS and cab versions S-FRM CLS3 LS ENG T P54 $2, Implement Mounting Subframe For Series II 45C and 55C SUBFRAME ECONOMY T P54 $2, Implement Mounting Subframe For discontinued 30A, 35A Subframe 33/37/41/ P54 $2, Implement Mounting Subframe For discontinued 30C, 35C, 40C, 50C Non-cab/ROPS only S-FRM CLS2,3 T4 R/C P54 $2, Implement Mounting Subframe For discontinued 35C, 40C, 50C Cab only S-Frame CLS3AT MY P26 $2, Implement Mounting Subframe for 45C CVT, 55C CVT and discontinued 40B CVT, 45B CVT, and 50B CVT - S/N ZxME21xxx and Above Front Quick Hitch 30/35/40/50 Implement Mounting Subframe For discontinued 30B, 35B, 40B and 50B P54 $2, of 109 -CP1L OCT-16

57 -CP1L 01 BM SERIES FRONT MOUNTED BLADES -BM1 (Ex Works - See Standard Equipment) Front Quick Hitch - Class 3 Implement Mounting Subframe for discontinued 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZxME21xxx; and discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT P26 $2, ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge OTHER EQUIPMENT SD_40002 BALLAST BOX X40002X No Ballasting Box No Charge Ballasting Box Lbs. For 3-pt hitch 100 LB P89 $ SD_50091 RUBBER BLADE EDGE X50091X No Rubber Cutting Edge No Charge Rubber Cutting Edge 61 LB P29 $ of 109 -CP1L OCT-16

58 -CP1L 01 BM SERIES FRONT MOUNTED BLADES -BM1 (Ex Works - See Standard Equipment) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Quick Hitch and Subframe MALE HITCH/SUBFRAME 33/37/41/46 HP T4 For Farmall 30C/35C/40C/50C SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above SUBFRAME CLS2 LS ENG T4 ECON PREM ROPS/C Subframe for Series II 35A/40A and Series II 35C/40C ROPS and cab versions Additional Attachments Rubber Cutting Edge For BM172 and BM172H 363 LB P54 $2, KG P54 $2, LB P26 $2, KG P26 $2, LB P54 $2, LB P98 $ SUBFRAME CLS3 LS ENG T4 PREM ROPS/CAB Subframe for Series II 45C/50C ROPS and cab versions 360 LB P54 $2, of 109 -CP1L OCT-16

59 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Standard Equipment BS163H HEAVY DUTY: BS163H HEAVY DUTY (Continued): For use with Front mount and drive completion - Farmall 30B & 35B package. Includes chute with hydraulic rotation, female Quick attach design, mid-pto driven portion of quick hitch and Overall width: 63 inches (1600mm) front half of driveline. Cutting width: 63 inches (1600mm) Cutting height: 22 inches (560mm) BS174H HEAVY DUTY: Number of blades: 4 For use with Fan diameter: 18 inches (457mm) - Farmall 40B & 50B Auger diameter: 14 inches (356mm) - Farmall 40C & 50C (Series I) Impeller drive: Gear box reduction - Farmall 45C & 55C Series II Auger Drive: Two-part chute with hydraulic chute rotation Quick attach design, mid-pto driven Shearbolt protection Overall width: 72 inches (1830mm) Adjustable skid shoes Cutting width: 72 inches (1830mm) Front mount and drive completion Cutting height: 26 inches (660mm) package. Includes chute with Number of blades: 4 hydraulic rotation, female Fan diameter: 24 inches (610mm) portion of quick hitch and Auger diameter: 15 inches (381mm) front half of driveline. Impeller drive: Gear box reduction/ #60 HD chain BS163H HEAVY DUTY: Auger Drive: Two-part chute with For use with hydraulic chute rotation - Farmall 30A & 35A (Series I) Shearbolt protection - Farmall 35C & 40A Series II Adjustable skid shoes - Farmall 30C & 35C (Series I) Front mount and drive completion - Farmall 35C & 45C Series II package. Includes chute with hydraulic rotation, female Quick attach design, mid-pto driven portion of quick hitch and Overall width: 63 inches (1600mm) front half of driveline. Cutting width: 63 inches (1600mm) Cutting height: 22 inches (560mm) Number of blades: 4 Fan diameter: 18 inches (457mm) Auger diameter: 14 inches (356mm) Impeller drive: Gear box reduction Auger Drive: Two-part chute with hydraulic chute rotation Shearbolt protection Adjustable skid shoes 53 of 109 -CP1M OCT-16

60 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Standard Equipment BS174H HEAVY DUTY: NOTES ABOUT MID PTO OFFERING For use with (Continued): - Farmall 40B CVT & 45B CVT Compact Farmall 30A and 35A (Series - Farmall 50B CVT I) (2016) the PTO kit can only be - Farmall 45C CVT & 55C CVT ordered through Parts order Quick attach design, mid-pto driven MT Overall width: 72 inches (1830mm) Cutting width: 72 inches (1830mm) Farmall C series II Cutting height: 26 inches (660mm) Mid Mount PTO is included as standard Number of blades: 4 equipment on all models. Fan diameter: 24 inches (610mm) Auger diameter: 15 inches (381mm) Farmall C series I ( ) Impeller drive: Gear box reduction/ the PTO kit can only be #60 HD chain ordered through Parts Auger Drive: Two-part chute with 30C, 35C non-cab-mt hydraulic chute rotation 35C with cab - MT Shearbolt protection 40C, 50C non-cab - MT Adjustable skid shoes 40C, 50C with cab - MT Front mount and drive completion package. Includes chute with Farmall B series ( ) hydraulic rotation, female the PTO kit can only be portion of quick hitch and ordered through Parts front half of driveline. 30B, 35B - MT B, 50B - MT NOTE: REQUIREMENTS FOR OPERATION CVT version tractors, A mid PTO kit is required to operate this Mid Mount PTO is included as implement. standard equipment. NOTES ABOUT MID PTO OFFERING TRACTOR MUST BE EQUIPPED WITH MID MOUNT VALVE AND JOYSTICK in Compact Farmall A Series II order to operate loaders, front mount brooms, front mount blades or Farmall A series II hyrdostatic front mount snow blowers. tranmission version tractors, Mid Mount PTO is included as NOTE: standard equipment. Compact FARMALL A, B, & C Series I and II tractors come equipped with Farmall A series II with gear Mid-mount valve and Joystick as transmission version tractors, Mid standard equipment PTO is optional. order tractor with factory installed Mid PTO or order MT through parts 54 of 109 -CP1M OCT-16

61 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price BS163H BS163H 63IN 1,005 LB P90 $5, BS174H BS174H 74IN 1,005 LB P19 $6, BS174H 45C CVT 55C CVT BS174J HD FR 450 LB P87 $7, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAME AND HITCH SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge S-FRM CLS2 LS P54 $2, Subframe for Series II 35A/40A and Series II 35C/40C ROPS and cab versions S-FRM CLS3 LS ENG T P54 $2, Subframe for Series II 45C/50C ROPS and cab versions Subframe 33/37/41/ P54 $2, Implement Mounting Subframe For discontinued 30C, 35C, 40C, 50C Non-cab/ROPS only S-FRM CLS2,3 T4 R/C P54 $2, Implement Mounting Subframe For discontinued 35C, 40C, 50C with Cab only SUBFRAME ECONOMY T P54 $2, Implement Mounting Subframe For discontinued 30A, 35A Front Quick Hitch 30/35/40/ P54 $2, Implement Mounting Subframe For discontinued 30B, 35B, 40B and 50B Front Quick Hitch - Class 3 Implement Mounting Subframe for discontinued Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZxME21xxx; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT P26 $2, of 109 -CP1M OCT-16

62 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) S-Frame CLS3AT MY14 Implement Mounting Subframe for Farmall 45C CVT, 55C CVT for discontinued Farmall 40B CVT, 45B CVT, and 50B CVT -S/N ZxME21xxx and Above P26 $2, FRONT MOUNTED DRIVE COMPLETING PACKAGE SD_03007 MID PTO DRIVE KIT X03007X No Mid PTO Drive Kit No Charge Mid PTO 32/36 HP T P58 $1, Mid PTO Drive Shaft Kit Includes mid-drive shaft, support, and tractor half of front driveline. For Series II 35A and 40A For Series II 35C and 40C For discontinued 30A and 35A For discontinued 30C and 35C Mid PTO Tier 4 41/47 Mid PTO Drive Shaft Kit Includes mid-drive shaft, support, and tractor half of front driveline. For Series II 45C and 55C Discontinued 40 and 50C P58 $1, Mid PTO Drive Kit-III AT Mid PTO Drive Shaft Kit For Farmall 45C CVT, 55C CVT For Discontinued 40B CVT, 45B CVT, and 50B CVT P51 $ Mid PTO 30/35/40/50 Mid PTO Drive Shaft Kit For discontinued Farmall 30B, 35B, 40B and 50B P58 $1, PART CHUTE SD_ PART CHUTE X29036X No 3 Part Chute No Charge Part Chute For BH163H or BH172H. Not available with BH163H FARMALL B or BH174H FARMALL B. 49 LB P12 $ DRIFT CUTTER KIT SD_50028 DRIFT CUTTER KIT X50028X No Drift Cutter No Charge Drift Cutter 28 LB P89 $ of 109 -CP1M OCT-16

63 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) ELECTRIC CHUTE DEFLECTOR SD_29038 ELEC CHUTE DEFLECT X29038X No Electric Chute Deflector No Charge Electric Chute Deflector 8 LB P57 $1, HYDRAULIC CHUTE DEFLECTOR SD_20101 HYDRAULIC CHUTE DEF X20101X No Hydraulic Chute Deflector No Charge Hydraulic Chute Deflector 16 LB P98 $ HYDRAULIC CHUTE ROTATION SD_20088 HYDRAULIC CHUTE ROT X20088X No Hydraulic Chute Rotation No Charge Hydraulic Chute Rotation 11 LB P12 $1, ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge French Canadian 1 LB No Charge OTHER EQUIPMENT SD_40002 BALLAST BOX X40002X No Ballasting Box No Charge Ballasting Box Lbs. for 3-pt hitch 100 LB P89 $ of 109 -CP1M OCT-16

64 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Quick Hitch and Subframe MALE HITCH/SUBFRAME 33/37/41/46 HP T4 For Farmall 30C/35C/40C/50C SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above SUBFRAME CLS2 LS ENG T4 ECON PREM ROPS/C Subframe for Series II 35A/40A and Series II 35C/40C ROPS and cab versions SUBFRAME CLS3 LS ENG T4 PREM ROPS/CAB Subframe for Series II 45C/50C ROPS and cab versions Mid PTO Drive Completion Kits MID PTO Drive Kit Cls 3 AT For Farmall 40, 45, 40B CVT, 45B CVT, and 50B CVT Mid PTO drive kit for 41/47 hp -T4 Mid PTO Drive Shaft Kit Includes mid-drive shaft, support, and tractor half of front driveline. For 40C and 50C For Series II 45C and 55C MID PTO 30/35/40/50 HP For Farmall 30B, 35B, 40B and 50B MID PTO 32/36 HP T4 Mid PTO Drive Shaft Kit Includes mid-drive shaft, support, and tractor half of front driveline. For 30C and 35C For Series II 35C and 40C For 30A and 35A For Series II 35A and 40A 363 LB P54 $2, KG P54 $2, LB P26 $2, KG P26 $2, LB P54 $2, LB P54 $2, KG P51 $ LB P58 $1, KG P58 $1, LB P58 $1, Additional Attachments Drift Cutter 28 LB P58 $ For BS172H or BH174H Ballast Box 500 Lb Max 0.5, LB P89 $ Part Chute For BH163H or BH172H. Not available with BH163H FARMALL B or BH174H FARMALL B. 45 LB P12 $ of 109 -CP1M OCT-16

65 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Hyd chute deflector For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H Electric chute deflector For BH163H, BH163B, BH172H or BH174H HYDRAULIC CUTE ROTATION KIT For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H ATTACHMENT, FRT MTG COMP. Front mount completion kit (63") for Farmall 31 and 35 and also for Farmall 30B, 35B, 40B and 50B FRONT PACKAGE Front mount completion kit (72") for Farmall 40, 45, 50, 40B CVT, 45B CVT, and 50B CVT also (74") for Farmall 30B, 35B, 40B, 50B 15 LB P98 $ LB P32 $1, LB P97 $1, LB P19 $1, LB P96 $1, of 109 -CP1M OCT-16

66 60 of 109

67 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Standard Equipment Model BR160: NOTE: For use with REQUIREMENTS FOR OPERATION - Farmall 35A & 40A Series II A mid PTO kit is required to operate this - Farmall 35C & 40C Series II implement. The PTO kit can only be - Farmall 30A & 35A ordered through Parts for these series - Farmall 30C & 35C of Farmall tractors - Farmall 30B & 35B Quick attach design, mid-pto driven NOTES ABOUT MID PTO OFFERING Sweeping width: 55 inches (1397mm) Sweeping 25º: 49 inches Compact Farmall A Series II (1245mm) Hyrdostatic tranmission version Broom diameter: 22 inches (560mm) tractors, Mid Mount PTO is included Brush type: Wafer as standard equipment. Bristle material: Polypropylene Manual angling: Standard Gear transmission version tractors, Mid Angling range: 0 to 25º PTO is optional. Drive system: PTO to Gearbox to order tractor with factory installed #50 HD chain Mid PTO or order MT Storage stand: Standard through CNHi parts Model BR172: Compact Farmall 30A and 35A (Prior For use with Models) the PTO kit can only be - Farmall 45C & 55C Series II ordered through CNHi Parts - Farmall 40C & 50C MT Farmall 40B & 50B - Farmall 40C CVT & 45C CVT Farmall C series II - Farmall 50C CVT & 55C CVT Mid Mount PTO is included as standard equipment on all models. Quick attach design, Mid-PTO driven Sweeping width: 67 inches (1702mm) Farmall C (Prior Models) Sweeping 25º: 60 inches the PTO kit can only be (1525mm) ordered through CNHi Parts Broom diameter: 22 inches (560mm) 30C, 35C non-cab-mt Bristle material: Polypropylene 35C with cab - MT Brush type: Wafer 40C, 50C non-cab - MT Manual angling: Standard 40C, 50C with cab - MT Angling range: 0 to 25º Drive system: PTO to Gearbox to #50 HD chain Storage stand: Standard 61 of 109 -CP1C OCT-16

68 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Standard Equipment NOTES ABOUT MID PTO OFFERING (continued): Farmall B series the PTO kit can only be ordered through CNHi Parts 30B, 35B - MT B, 50B - MT CVT version tractors, Mid Mount PTO is included as standard equipment. TRACTOR MUST BE EQUIPPED WITH MID MOUNT VALVE AND JOYSTICK in order to operate loaders, front mount brooms, front mount blades or front mount snow blowers. NOTE: Compact FARMALL A, B, & C Series I and II tractors come equipped with Mid-mount valve and Joystick as standard equipment 62 of 109 -CP1C OCT-16

69 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL TECHNICAL TYPE Weight Factory Data List Price BR160 BRX160 60IN ROT BROOM 500 LB P83 $4, ,2,3 BR BRB172 72IN ROT 600 LB P92 $5, BROO BR172 40C-55C CVT BRX172 72IN ROT BROO 500 LB P92 $5, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAME AND HITCH SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge S-FRM CLS2 LS P54 $2, Implement Mounting Subframe For Series II 35A and 40A For Series II 35C and 40C S-FRM CLS3 LS ENG T P54 $2, Implement Mounting Subframe For Series II 45C and 55C SUBFRAME ECONOMY T P54 $2, Implement Mounting Subframe For discontinued 30A, 35A Subframe 33/37/41/ P54 $2, Implement Mounting Subframe For Farmall 30C, 35C, 40C, 50C Non-cab/ROPS only S-FRM CLS2,3 T4 R/C P54 $2, Implement Mounting Subframe For discontinued 35C, 40C, 50C with Cab only S-Frame CLS3AT MY14 Implement Mounting Subframe for 45C CVT, 55C CVT and discontinued 40B CVT, 45B CVT, and 50B CVT - S/N ZxME21xxx and above P26 $2, of 109 -CP1C OCT-16

70 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Front Quick Hitch 30/35/40/50 Implement Mounting Subframe For discontinued 30B, 35B, 40B and 50B Front Quick Hitch - Class 3 Implement Mounting Subframe for discontinued 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZxME21xxx; and discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT P54 $2, P26 $2, DRIVE COMPLETION KITS SD_03007 MID PTO DRIVE KIT X03007X No Mid PTO Drive Kit No Charge Mid PTO 32/36 HP T P58 $1, Includes mid-drive shaft, support, and tractor half of front driveline. For Series II 35A, 40A, 35C, 40C For discontinued 30C and 35C Mid PTO Tier 4 41/47 For Series II 45C and 55C For discontinued 40C and 50C P58 $1, Mid PTO Drive Kit-III AT For Farmall 45C CVT, 55C CVT discontinued 40B CVT, 45B CVT, and 50B CVT P51 $ Mid PTO 30/35/40/50 For discontinued 30B, 35B, 40B and 50B P58 $1, HYDRAULIC ANGLING KIT SD_20087 HYDRAULIC FRAME ANGLING KIT X20087X No Hydraulic Angling Kit No Charge Hydraulic Angling Kit 26 LB P15 $ SIDE CASTERWHEELS KIT SD_29035 SIDE CASTER WHEEL KIT X29035X No Side Casterwheels Kit No Charge Side Casterwheels Kit 2 x 6 47 LB P07 $ of 109 -CP1C OCT-16

71 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge 65 of 109 -CP1C OCT-16

72 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Quick Hitch and Subframe MALE HITCH/SUBFRAME 33/37/41/46 HP T4 For Farmall 30C/35C/40C/50C SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above 363 LB P54 $2, KG P54 $2, LB P26 $2, KG P26 $2, Mid PTO Drive Completion Kits MID PTO Drive Kit Cls 3 AT For Farmall 40 CVT, 45 CVT, 50 CVT, 40B CVT, 45B CVT, and 50B CVT MID PTO 32/36 HP T4 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline Mid PTO drive kit for 41/47 hp -T4 For Farmall 40C/ 50C MID PTO 30/35/40/50 HP Mid PTO drive kit for Farmall 30B, 35B, 40B and 50B Additional Attachments X 6 side caster w/wheel kit For BR160 and BR HYD ANGLING 60&72"(2.0,3.0) For Farmall 30, 35, 40, 45, 50, 30B, 35B, 40B, 50B, 40B CVT, 45B CVT, and 50B CVT 30 KG P51 $ LB P58 $1, LB P58 $1, KG P58 $1, LB P07 $ KG P15 $ SUBFRAME CLS2 LS ENG T4 ECON PREM ROPS/C 360 LB P54 $2, SUBFRAME CLS3 LS ENG T4 PREM ROPS/CAB 360 LB P54 $2, of 109 -CP1C OCT-16

73 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) Standard Equipment BACKHOE MODEL: BHA90 BACKHOE MODEL: BHA102 TRACTOR APPLICATION: TRACTOR APPLICATION: Series II 35A, 40A Series II 35A, 40A Series II 35C, 40C, 45C, 55C Series II 35C, 40C, 45C, 55C Farmall 30A, 35A Farmall 30C, 35C, 40C, 50C Farmall 30C, 35C, 40C, 50C Farmall 45C and 55C CVT Farmall 45C and 55C CVT Farmall 40B, 45B, and 50B CVT Farmall 40B, 45B, and 50B CVT Farmall 30B, 35B, 40B, 50B Farmall 30B, 35B, 40B, 50B *SPECIFICATIONS: *SPECIFICATIONS: Digging Depth - 92 in. Digging Depth in. Reach from Swing Pivot in. Reach from Swing Pivot in. Transport Height - 77 in. Transport Height - 88 in. Bucket Rotation Bucket Rotation Stabilizer Spread: Stabilizer Spread: Transport - 49 in. Transport - 56 in. Operating in. Operating in. Loading Height 70 in. Loading Height 76.0 in. Swing Arc Swing Arc Bucket Digging Forces lb. Bucket Digging Forces lb. Dipper Stick Digging Forces lb. Dipper Stick Digging Forces lb. Shipping Weight lb. Shipping Weight lb. Operating Pressure psi Operating Pressure psi *Specifications may vary with tractor *Specifications vary with tractor model, model, hydraulic system, tire size, etc. hydraulic system, tire size, etc. IMPORTANT INFORMATION IMPORTANT INFORMATION The tractor must be equipped with a The tractor must be equipped with a front end loader or front mount blade front end loader or front mount blade when installing a BHA Series backhoe. when installing a BHA Series backhoe. Note: Mid-mount mower is not Note: Mid-mount mower is not compatible with backhoe installed. compatible with backhoe installed. The following items are required to The following items are required to make up a complete backhoe: make up a complete backhoe: - Basic Packaged Backhoe - Basic Packaged Backhoe - Subframe (one required) - Subframe (one required) - Hydraulic Kit (one required) - Hydraulic Kit (one required) - Bucket (one required) - Bucket (one required) - Optional Equipment - Optional Equipment 67 of 109 -CP2C OCT-16

74 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price BHA90 BACKHOE BHA90A 1,065 LB P30 $8, BHA102 BACKHOE BHA102 1,065 LB P81 $8, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAMES SD_N5701 HITCH AND SUBFRAME S-FRM CLS2 LS ENG T4 Subframe for Series II 35C and 40C S-FRM CLS2 LS Subframe for Series II 35A and 40A S-FRM CL2 T4 ROP/CAB Backhoe Mounting Subframe for Farmall 35C Cab Subframe CL2 Backhoe Mounting Subframe For Compact Farmall 30A/35A, Farmall 30C, 35C and discontinued 30B and 35B If ordering for a 30B or 35B (439118) FR HANGER BRKT CLS 2 MUST BE ordered in addition S-FRM CL3 T4 ROP/CAB Backhoe Mounting Subframe for 40C, and 50C Cab and ROPS for Series II 45C and 55C Cab and ROPS Subframe CL3 Backhoe Mounting Subframe For Farmall 40C, 50C and Farmall 40B, 50B If ordering for a 40B or 50B (439119) FR HANGER BRKT CLS 3 MUST BE ordered in addition Front Quick Hitch - Class 3 Backhoe Mounting Subframe for Farmall 45C CVT, 55C CVT No Charge No Charge No Charge No Charge No Charge No Charge No Charge 68 of 109 -CP2C OCT-16

75 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) SUBFRAME 45/55 HP Backhoe Mounting Subframe for Farmall 50A, 60A, 70A and discontinued Farmall 45A, 55A For BHA102 only No Charge SD_N5702 FRONT BRACKETS XN5702X No Front Brackets No Charge Fr Hanger Brkt Cls P81 $53.00 Front Hanger Kit for Farmall 30B/35B - Must be used with (Farmall 30C/35C subframe) to allow Tier 4 subframe to fit Tier 3 units Fr Hanger Brkt Cls 3 Front Hanger Kit for Farmall 40B/50B - Must be used with (Farmall 40C/50C subframe) to allow Tier 4 subframe to fit Tier 3 units P81 $53.00 HYDRAULIC KITS SD_20102 HYDRAULIC KIT HYD KIT CL2 33/37 Hydraulic Kit For Compact Farmall 30A, 35A For Series II 35A and 40A Hyd Kit Cls 2 ROPS Hydraulic Kit Farmall 30C, 35C non-cab and discontinued Farmall 30B, 35B HYD CLS2 T4 ROPS/CAB Hydraulic Kit Farmall 35C Cab only For Series II 35C and 40C Hyd Kit Cls 3 ROPS Hydraulic Kit Farmall 40C, 50C non-cab and discontinued Farmall 40B, 50B HYD CLS3 T4 ROPS/CAB Hydraulic Kit Farmall 40C, 50C For Series II 45C, 55C Hyd Kit Cls 3 CVT Hydraulic Kit For Farmall CVT No Charge No Charge No Charge No Charge No Charge No Charge 69 of 109 -CP2C OCT-16

76 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) Hyd Kit WM/FA Hydraulic Kit for Farmall 50A, 60A, 70A and discontinued Farmall 45A, 55A For BHA102 only No Charge BUCKET SD_N IN STD BUCKET XN5403X No 12 In. Standard Bucket No Charge In./305mm Standard Bucket P34 $ SD_N IN STD BUCKET XN5405X No 16 In. Standard Bucket No Charge In. Standard Bucket P69 $ SD_N IN STD BUCKET XN5407X No 18 In. Standard Bucket No Charge In./457mm Standard Bucket P40 $ SD_N IN STD BUCKET XN5409X No 24 In. Standard Bucket No Charge In. Standard Bucket P27 $ FACTORY SUPPLIED ACCESSORIES - IMPLEMENTS FOR COMPACT/MIDRANGE TRACTORS QUICK HITCH AND SUBFRAME SD_50005 BIG FOOT DIRT PADS X50005X No Big Foot Dirt Pads No Charge Big Foot Dirt Pads P97 $ SD_50092 RUBBER STREET PADS X50092X No Rubber Street Pads No Charge Rubber Street Pads P06 $ SD_N6413 MECH THUMB XN6413X No Mechanical Thumb No Charge Mechanical Thumb P48 $ BHA90 only Mechanical Thumb Class 3 BHA102 only P48 $ of 109 -CP2C OCT-16

77 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Front Hanger Bracket Class 2 40 LB P81 $53.00 Front Hanger Kit for Farmall 30B/35B - Must be used with (Farmall 30C/35C subframe) to allow Tier 4 subframe to fit Tier 3 units Front Hanger Bracket Class 3 Front Hanger Kit for Farmall 40B/50B - Must be used with (Farmall 40C/50C subframe) to allow Tier 4 subframe to fit Tier 3 units. 40 LB P81 $ In 3 Teeth 1.02 Cu. Ft Heaped Std/ LB P34 $ In 4 Teeth 1.38 Cu. Ft Heaped Std/ LB P69 $ In 4 Teeth 1.57 Cu. Ft Heaped Std/ LB P40 $ In 4 Teeth 2.13 Cu. Ft Heaped Std/ LB P27 $ Big Foot Dirt Pads 52 LB P97 $ Mechanical Thumb Class Ft 90 LB P48 $ BHA90 only Mechanical Thumb Class Ft BHA102 only 90 LB P48 $ Rubber Street Pads 4 LB P06 $ of 109 -CP2C OCT-16

78 72 of 109

79 -CP1K 01 TL SERIES ROTARY TILLERS (Ex Works Wholegoods Depot) Standard Equipment TL160: TL172H: For use with For use with - Farmall 30A & 35A - Farmall 40C & 50C - Farmall 30C & 35C - Farmall 45C CVT & 55C CVT - Farmall 30B & 35B - Farmall 40B CVT, 45B CVT, and 50B CVT Approximate working width: 60 inches (1524mm) Approximate working width: 72 inches Tilling depth adjustment with guide (1830mm) shoes: 0 to 4.5 inches (0 to 114mm) Tilling depth adjustment with guide Maximum tilling depth without guide shoes: 0 to 5 inches (0 to 127mm) shoes: 7.25 inches (184mm) Maximum tillage depth without guide Hitch: Category I shoes: 7 inches (178mm) Offset Adjustment to Right: 11 inches Hitch: Category I or II (280mm) Offset Adjustment to Right: 11 inches PTO hp Rating: 45 (280mm) Rotor Drive Type: Chain PTO hp Rating: 60 Drive Protection: Slip Clutch Rotor Drive Type: Gear Rotor 540 RPM PTO: 236 RPM Drive Protection: Slip Clutch Number of Blades: 28 Rotor 540 RPM PTO: 211 RPM Blade Tip 540 RPM: Number of Blades: (FPM) Blade Tip 540 RPM: 944 (FPM) 73 of 109 -CP1K OCT-16

80 -CP1K 01 TL SERIES ROTARY TILLERS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price TL160 60IN ROT TILL TLX160 60IN CHAIN D 1,000 LB P10 $3, TL172 72IN ROT TILL TLX172 72IN CHAIN D 1,000 LB P40 $3, TL172H 72IN ROT TILL TL172H 72IN HD GEAR 1,000 LB P60 $3, TL180H 80IN ROT TILL TL180H 80IN HD GEAR 1,200 LB P89 $4, Factory Supplied Options Order Code Description Weight Factory Data List Price ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge 74 of 109 -CP1K OCT-16

81 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Standard Equipment ROTARY CUTTER - ECONOMY ROTARY CUTTER - STANDARD DUTY (3-POINT): (3-POINT): RC480: RC605: Cutting Width: 48 in. Cutting Width: 60 in. Cutting Height: 1 in. (min.) Cutting Height: 2 1/2 in. (min.) Cutting Capacity: 2 in. (max.) Cutting Capacity: 2 1/2 in. (max.) Blade Carrier: Pan Blade Carrier: Pan Deck Thickness: 10 gauge Deck Thickness: 7 gauge Safety Deflectors: Rear Rubber Belting Safety Deflectors: Rear Rubber Belting Driveline Size: Cat rpm Driveline Size: Cat rpm Slip Protection: Shear Pin Slip Protection: Splined Slip Clutch Tire and Wheel: Laminated Tire and Wheel: Laminated 1 spindle 1 spindle Single tail wheel RC600: Cutting Width: 60 in. RC725: Cutting Height: 2 in. (min.) Cutting Width: 83 in. Cutting Capacity: 2 in. (max.) Cutting Height: 2 in. (min.) Blade Carrier: Pan Cutting Capacity: 2 1/2 in. (max.) Deck Thickness: 7 gauge Blade Carrier: Pan Safety Deflectors: Rear Rubber Belting Deck Thickness: 7 gauge Driveline Size: Cat rpm Safety Deflectors: Rear Rubber Belting Slip Protection: Shear Pin Driveline Size: Cat rpm Tire and Wheel: Laminated Slip Protection: Slip Clutch 1 spindle Tire and Wheel: Laminated 1 spindle RC720: Single tail wheel Cutting Width: 72 in. Cutting Height: 2 in. (min.) RC840: Cutting Capacity: 2 in. (max.) Cutting Width: 83 in. Blade Carrier: Pan Cutting Height: 2 in. (min.) Deck Thickness: 7 gauge Cutting Capacity: 2 1/2 in. (max.) Safety Deflectors: Rear Rubber Belting Blade Carrier: Pan Driveline Size: Cat rpm Deck Thickness: 7 gauge Slip Protection: Shear Pin Safety Deflectors: Rear Rubber Belting Tire and Wheel: Laminated Driveline Size: Cat rpm 1 spindle Slip Protection: Slip Clutch Tire and Wheel: Laminated 1 spindle Single tail wheel 75 of 109 -CP1T OCT-16

82 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Standard Equipment ROTARY CUTTER - HEAVY DUTY ROTARY CUTTER - HEAVY DUTY (3-POINT): (3-POINT): (continued) RC727: RC960: Cutting Width: 72 in. Cutting Width: 96 in. Cutting Height: 2 in. (min.) Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) Cutting Capacity: 3 in. (max.) Blade Carrier: Pan Blade Carrier: Pan Deck Thickness: 7 gauge Deck Thickness: 3/16 x 7 gauge Safety Deflectors: Front and Rear Safety Deflectors: Front and Rear Chains Chains Driveline Size: Cat rpm Driveline Size: Cat rpm Slip Protection: Splined Slip Clutch Slip Protection: Slip Clutch Tire and Wheel: Laminated Tire and Wheel: Laminated 1 spindle 2 spindle Single tail wheel Dual tail wheel RC845: ROTARY CUTTER - HEAVY DUTY Cutting Width: 84 in. (PULL-TYPE): Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) RC1200: Blade Carrier: Pan Cutting Width: 120 in. Deck Thickness: 7 gauge Cutting Height: 2 in. (min.) Safety Deflectors: Front and Rear Cutting Capacity: 3 in. (max.) Chains Blade Carrier: Pan Driveline Size: Cat rpm Deck Thickness: 7 gauge Slip Protection: Splined Slip Clutch Safety Deflectors: Front and Rear Tire and Wheel: Laminated Chains 1 spindle Main Driveline: Cat. 5 CV w/ Single tail wheel Slip Clutch rpm Tire and Wheel: Laminated RC84HD: 2 spindle Cutting Width: 84 in. Cutting Height: 2 in. (min.) Cutting Capacity: 4 in. (max.) Blade Carrier: Pan Deck Thickness: 3/16 x 7 gauge Safety Deflectors: Front and Rear Chains Driveline Size: Cat rpm Slip Protection: Slip Clutch Tire and Wheel: Laminated 1 spindle Dual tail wheel 76 of 109 -CP1T OCT-16

83 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Standard Equipment ROTARY CUTTER - HEAVY DUTY REQUIREMENTS FOR OPERATION: (PULL-TYPE): (continued) Tractor Horsepower (Max.): RC480 - up to 48 RC rpm driveline: RC600 - up to 48 (Standard and RC720 - up to 48 Smooth Top/Double Deck) RC605 - up to 65 Cutting Width: 180 in. RC725 - up to 65 Cutting Height: 2 in. (min.) RC840 - up to 65 Cutting Capacity: 3 in. (max.) RC727 - up to 95 Blade Carrier: Pan RC845 - up to 95 Deck Thickness: 7 gauge RC84HD - up to 140 Safety Deflectors: Front and Rear RC960 - up to 140 Chains RC up to 150 Main Driveline: Cat. 5 CV w/ RC up to 210 Slip Clutch 540 rpm Outboard Drivelines to wings: Cat. 4 w/slip Clutch Tire and Wheel: Laminated 3 spindle RC rpm driveline: (Standard and Smooth Top/Double Deck) Cutting Width: 180 in. Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) Blade Carrier: Pan Deck Thickness: 7 gauge Safety Deflectors: Front and Rear Chains Main Driveline: Cat. 5 CV w/ Slip Clutch 1000 rpm - 1 3/8 in. shaft 1000 rpm - 1 3/4 in. shaft Outboard Drivelines to wings: Cat. 4 w/slip Clutch Tire and Wheel: Aircraft (used) 3 spindle Hydraulic level lift 77 of 109 -CP1T OCT-16

84 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price RC480 ROTARY CUTTR 48 in. standard-duty P26 $1, RC600 ROTARY CUTTR 60 in. standard-duty P92 $1, RC720 ROTARY CUTTR 72 in. standard-duty P32 $2, RC605 ROTARY CUTTR 60 in. medium-duty P33 $2, RC725 ROTARY CUTTR 72 in. medium-duty P52 $3, RC840 ROTARY CUTTR 84 in. medium-duty P19 $3, RC727 ROTARY CUTTR 72 in. HD single tail P74 $3, RC845 ROTARY CUTTR 84 in. HD single tail P76 $5, RC84HD ROTARY CUTTR 84 in. HD dual tail P85 $7, RC960 ROTARY CUTTR 96 in. HD dual tail P57 $8, RC1200 ROTARY CUTTR 540 rpm, 120 in P82 $11, RC RPM 540 rpm, 180 in P64 $20, RC RPM 1-3/ rpm 180 in.1-3/8 in. shft P95 $23, RC RPM 1-3/ rpm 180 in.1-3/4 in. shft P95 $23, RC RPM DD 540rpm, 180 in. Dbl Deck P57 $23, RC /8 DD 1000rpm,180in.1-3/8 Dbl Deck P44 $26, RC /4 DD 1000rpm,180in.1-3/4 Dbl Deck P44 $26, Factory Supplied Options Order Code Description Weight Factory Data List Price OTHER EQUIPMENT SD_16049 EXTRA WHEELS, TIRES AND RIMS X16049X No Extra Wheels and Tires No Charge Aircraft Tires (2) Available on RC1800 with 1000RPM driveline P83 $ Aircraft Tires (6) P95 $1, Available on RC1800 with 540RPM driveline Aircraft Tires (8) P17 $1, Available on RC1800 with 540RPM driveline Foam Filled P Tire P17 $1, Available on all RC1800 Models Foam Filled P Tire 8 Available on all RC1800 Models P25 $2, of 109 -CP1T OCT-16

85 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) SD_N6428 FRONT SAFETY CHAINS XN6428X No Front Safety Chains No Charge Front Safety Chains Available on RC480, RC600 and RC P54 $ SD_N6429 REAR SAFETY CHAINS XN6429X No Rear Safety Chain No Charge Rear Safety Chains Available on RC480, RC600 and RC P54 $ SD_N6430 SLIP CLUTCH XN6430X No Slip Clutch No Charge Slip Clutch Available on RC480, RC600 and RC P11 $ SD_N6431 DUAL TAIL WHEEL XN6431X No Dual Tail Wheel No Charge Dual Tail Wheel Available on RC605, RC725, RC727, RC840, RC845, and RC P37 $ SD_N6432 HYD LIFT XN6432X No Hyd Lift No Charge Hyd Lift Available on RC1800 with 540RPM driveline P62 $1, SD_N6433 COATING XN6433X No Coating No Charge Galvanized if MODEL is 72 in. standard-duty P32 $ if MODEL is 60 in. medium-duty P32 $ if MODEL is 48 in. standard-duty P32 $ if MODEL is 72 in. medium-duty P32 $ if MODEL is 60 in. standard-duty P32 $ if MODEL is 84 in. medium-duty P32 $ if MODEL is 540 rpm, 120 in P53 $ if MODEL is 96 in. HD dual tail P53 $ if MODEL is 84 in. HD dual tail P53 $ if MODEL is 84 in. HD single tail P53 $ if MODEL is 72 in. HD single tail P53 $ if MODEL is 540 rpm, 180 in P90 $ if MODEL is 540rpm, 180 in. Dbl Deck P90 $ if MODEL is 1000 rpm 180 in.1-3/4 in. shft P90 $ if MODEL is 1000 rpm 180 in.1-3/8 in. shft P90 $ if MODEL is 1000rpm,180in.1-3/4 Dbl Deck P90 $ if MODEL is 1000rpm,180in.1-3/8 Dbl Deck P90 $ of 109 -CP1T OCT-16

86 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) SD_N6436 QUICK ATTACH HITCH XN6436X No Quick Attach Hitch No Charge Quick Attach Hitch Availiable on RC480, RC600, RC605, RC720, RC725, RC727, RC840, RC845, RC84HD, RC P22 $ of 109 -CP1T OCT-16

87 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Front Safety Chains " Front Safety Chains Available on RC " Front Safety Chains Available on RC " Front Safety Chains Available on RC720 Rear Safety Chains " Rear Safety Chains Available on RC " Rear Safety Chains Available on RC " Rear Safety Chains Available on RC LB P54 $ LB P54 $ LB P54 $ LB P54 $ LB P54 $ LB P54 $ of 109 -CP1T OCT-16

88 82 of 109

89 -CP1U 01 WORK EZ DISK HARROW (Ex Works Beaumont, TX) Standard Equipment 78 IN. DISK HARROW: REQUIREMENTS FOR OPERATION: Number of Disk Blades: 20 notched Tractor Horsepower (Min./Max.): (front and rear) Hitch: Cat. I EZ Match compatible Disk Blade Size: 18 in. diameter Disk Blade Spacing: 5 1/2 in. F, 6 1/2 in., 7 1/2 in. R Maximum Cutting Depth: 6 in. Cutting Width: 70 in. Overall Length: 60 in. Overall Width: 79 in. Bearing Lubrication: sealed bearings Adjustable gang angle 83 of 109 -CP1U OCT-16

90 -CP1U 01 WORK EZ DISK HARROW (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ DISK HARROW EZ78DC 78in Disk Harrow 678 LB P58 $2, of 109 -CP1U OCT-16

91 -CP1V 01 WORK EZ RAKES (Ex Works Beaumont, TX) Standard Equipment LANDSCAPE RAKE: REQUIREMENTS FOR OPERATION: Rake Width: Maximum Tractor Horsepower: 50 60LR - 60 in. Hitch: Cat. I EZ Match compatible 72LR - 72 in. 84LR - 84 in. Tine Spacing: 1 in. Tine Size: 5/16 x 1 in. Tine Material: high carbon spring steel Angle: 5 forward / 3 reverse Rake Pivot: 360 Pivot King Pin: 1 1/4 in. 85 of 109 -CP1V OCT-16

92 -CP1V 01 WORK EZ RAKES (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 60LR RAKE EZ60L 60in Landsc Rake 245 LB P65 $ WORK EZ 72LR RAKE EZ72LR 72in Landsc Rake 269 LB P06 $1, WORK EZ 84LR RAKE EZ84LR 84in Rock Rake 326 LB P21 $1, of 109 -CP1V OCT-16

93 -CP1W 01 WORK EZ BOX BLADES (Ex Works Beaumont, TX) Standard Equipment BOX BLADES: INDUSTRIAL (For Contractors): STANDARD DUTY (For Estate and Homeowners): OPTIONAL hydraulic raise/lower shank bar (infinite adjustment) Number of Scarifiers (Shanks): 4 to 5 Number of Scarifiers (Shanks): 8 Overall Height: 35 1/2 in. Overall Height: 36 in. Box Depth: 17 in. Box Depth: 19 in. Cutting Edge: 1/2 x 6 in., Reversible Cutting Edge: 1/2 x 6 in., Reversible Number of Cutting Edges: 2 Number of Cutting Edges: 2 Shank Adjustment: manual Shank Adjustment: manual Side Plate (Endplate) Thickness: Side Plate (Endplate) Thickness: 3/16 in. 3/4 in. Hinges Rear Flat with Cutting Edge: Hinges Rear Flat with Cutting Edge: n/a Standard MEDIUM DUTY (For Landscapers): REQUIREMENTS FOR OPERATION: OPTIONAL hydraulic raise/lower shank Tractor Horsepower (Max.): bar (infinite adjustment) 48BL - up to 28 2wd / 20 4wd Number of Scarifiers (Shanks): 6 60BL - up to 28 2wd / 20 4wd Overall Height: 36 in. 60BM - up to 50 2wd / 40 4wd Box Depth: 17 in. 72BM - up to 50 2wd / 40 4wd Cutting Edge: 1/2 x 6 in., Reversible 84BM - up to 50 2wd / 40 4wd Number of Cutting Edges: 2 72BH - up to 75 2wd / 55 4wd Shank Adjustment: manual 84BH - up to 75 2wd / 55 4wd Side Plate (Endplate) Thickness: 96BI - up to 100 2wd / 80 4wd 3/8 in. Hinges Rear Flat with Cutting Edge: 3 Pt. Hitch: n/a 48BL - Cat. I EZ Match compatible 60BL - Cat. I EZ Match compatible HEAVY DUTY (For Contractors): 60BM - Cat. I 72BM - Cat. I OPTIONAL hydraulic raise/lower shank 84BM - Cat. I bar (infinite adjustment) 72BH - Cat. I Number of Scarifiers (Shanks): 6 84BH - Cat. I Overall Height: 36 in. 96BI - Cat. II Box Depth: 19 in. Cutting Edge: 1/2 x 6 in., Reversible Number of Cutting Edges: 2 Shank Adjustment: manual Side Plate (Endplate) Thickness: 1/2 in. Hinges Rear Flat with Cutting Edge: Standard 87 of 109 -CP1W OCT-16

94 -CP1W 01 WORK EZ BOX BLADES (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 48BL BLADE 48in 3pt Box Std Duty 363 LB P21 $ WORK EZ 60BL BLADE 60in 3pt Box Std Duty 437 LB P99 $1, WORK EZ 60BM BLADE 60in 3pt Box Med Duty 534 LB P71 $1, WORK EZ 60BM BLADE 60in 3pt Box Med Duty - Hydr 701 LB P85 $2, WORK EZ 72BM BLADE 72in 3pt Box Med Duty 643 LB P86 $1, WORK EZ 72BM BLADE 72in 3pt Box Med Duty - Hydr 701 LB P54 $2, WORK EZ 84BM BLADE 84in 3pt Box Med Duty 703 LB P63 $1, WORK EZ 84BM BLADE 84in 3pt Box Med Duty - Hydr 701 LB P77 $2, WORK EZ 72BH BLADE 72in 3pt Box Hvy Duty 704 LB P56 $2, WORK EZ 72BH BLADE 72in 3pt Box Hvy Duty - Hydr 701 LB P64 $3, WORK EZ 84BH BLADE 84in 3pt Box Hvy Duty 803 LB P09 $2, WORK EZ 84BH BLADE 84in 3pt Box Hvy Duty - Hydr 803 LB P94 $3, WORK EZ 96BI BLADE 96in 3pt Box Ind Duty 1,153 LB P82 $2, WORK EZ 96BI BLADE 96in 3pt Box Ind Duty - Hydr 701 LB P44 $4, Factory Supplied Options Order Code Description Weight Factory Data List Price OTHER OPTIONS SD_N6433 COATING XN6433X No Coating No Charge Galvanized P54 $ of 109 -CP1W OCT-16

95 -CP1X 01 WORK EZ REAR BLADES (Ex Works Beaumont, TX) Standard Equipment REAR BLADES: REQUIREMENTS FOR OPERATION: STANDARD UTILITY (For Estate and Tractor Horsepower (max.): Homeowners): 60SL - 30 Moldboard Width: 60 in. / 72 in. 72SL - 30 Cutting Edge: 1/2 in. x 6 in. 60SM - 40 Offset Adjustment: 12 in. 72SM - 40 Tilt Adjustment: n/a 84SM - 40 Angle Adjustment: 5 Forward / 3 72SH - 65 Reverse positions 84SH SI MEDIUM DUTY (For Landscapers, Farm, 108SI or Ranch): 96SHI Moldboard Width: 60 in. / 72 in. / 84 in. 120SHI Cutting Edge: 1/2 in. x 6 in. 144SHI Offset Adjustment: 12 in. Tilt Adjustment: 45 / E side 3 Pt. Hitch: Angle Adjustment: 5 Forward / 3 60SL - Cat. I EZ Match compatible Reverse positions 72SL - Cat. I EZ Match compatible 60SM - Cat. I EZ Match compatible HEAVY DUTY (For Contractors): 72SM - Cat. I EZ Match compatible Moldboard Width: 84 in. / 96 in. 84SM - Cat. I EZ Match compatible Cutting Edge: 1/2 in. x 6 in. 72SH - Cat. I/II Offset Adjustment: 12 in. 84SH - Cat. I/II Tilt Adjustment: 30 96SI - Cat. II Angle Adjustment: 5 Forward / 3 108SI - Cat. II Reverse positions 96SHI - Cat. II/III 120SHI - Cat. II/III INDUSTRIAL (For Contractors): 144SHI - Cat. II/III Moldboard Width: 96 in. / 108 in. Cutting Edge: 1/2 in. x 6 in. Offset Adjustment: 12 in. Tilt Adjustment: 15 Angle Adjustment: 30 HEAVY INDUSTRIAL (For Contractors): Moldboard Width: 96 in./120 in./144 in. Cutting Edge: 1/2 in. x 6 in. Offset Adjustment: 24 in. Tilt Adjustment: 15 Angle Adjustment: of 109 -CP1X OCT-16

96 -CP1X 01 WORK EZ REAR BLADES (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 60SM BLADE 60in 3pt Rear Med Duty 256 LB P22 $ WORK EZ 72SM BLADE 72in 3pt Rear Med Duty 328 LB P79 $1, WORK EZ 84SM BLADE 84in 3pt Rear Med Duty 297 LB P74 $1, WORK EZ 84SH BLADE 84in 3pt Rear Hvy Duty 684 LB P40 $1, WORK EZ 96SH BLADE 96in 3pt Rear Hvy Duty 679 LB P73 $1, WORK EZ 96SI BLADE 96in 3pt Rear Ind Duty 1,074 LB P55 $4, WORK EZ 108SI BLADE 108in 3pt Rear Ind Duty 1,113 LB P35 $5, WORK EZ 96SHI BLADE 96in 3pt Rear Hvy Industrial 2, P07 $10, WORK EZ 120SHI BLADE 108in 3pt Rear Hvy Industrial 2,260 LB P89 $11, WORK EZ 144SHI BLADE 144in 3pt Rear Hvy Industrial 2,400 LB P55 $11, of 109 -CP1X OCT-16

97 -CP2A 01 WORK EZ EZ MATCH (Distribution Center) Standard Equipment The WORK EZ EZ Match Quick Hitch The following Case-IH products are is designed to make changing from one quick hitch compatible: 3-point hitch attachment to another quick and EZ! The upper hook easily slips into EZ78DC - 78 in. Disk Harrow position and simply lock the lower hooks EZ60LR - 60 in. Landscape Rake with quick flip of two handles - many EZ72LR - 72 in. Landscape Rake times from the comfort and convenience EZ84LR - 84 in. Rock Rake of the tractor seat. EZ48BL - 48 in. Standard Duty Box Blade EZ60BL - 60 in. Standard Duty Box Blade Designed for use on Category 1, 3-point EZ60SL - 60 in. Standard Utility hitch tractors and implements Rear Blade EZ72SL - 72 in. Standard Utility Heavy-duty steel construction Rear Blade Lower arms lock automatically EZ60SM - 60 in. Medium Duty Fast, easy attachment and release Rear Blade Designed to ASAE S278.7 Quick Hitch EZ72SM - 72 in. Medium Duty standards Rear Blade EZ84SM - 84 in. Medium Duty MODEL: WORK EZ EZ Match Rear Blade Width (inches) - 28 center to center (Hooks are 1-1/2 " wide) Height (inches) - 24 Weight (pounds) - 80 Maximum Horsepower of 109 -CP2A OCT-16

98 -CP2A 01 WORK EZ EZ MATCH (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price WORK EZ EZ MATCH 400 LB P34 $ of 109 -CP2A OCT-16

99 -CP2B 01 WORK EZ BALE CARRIERS Standard Equipment WORK EZ Bale Carriers and Spears MODEL: Work EZ Bale Spear are designed to compliment compact Application - Standard duty and utility tractors equipped with 3-point Weight - 98 lbs hitch for handling round and square hay Weight rating lbs bales. The WORK EZ Bale Carriers Tractor Horsepower (max) - 60 and Spears are also Work EZ - EZ Hitch - Cat. I Match compatible. Hot dipped galvanized frame Replaceable high carbon steel spear MODEL: Work EZ Bale Carrier Two welded bottom stabilizing spears Application - Standard duty Weight lbs Weight rating lbs Tractor horsepower (max) - 60 Hitch - Cat. I Hot dipped galvanized frame NOTE: Fork tines go under bale 93 of 109 -CP2B OCT-16

100 -CP2B 01 WORK EZ BALE CARRIERS Models COMMERCIAL MODEL Weight Factory Data List Price WORK EZ BALE CARRIER 88 LB P12 $ WORK EZ BALE SPEAR 155 LB P08 $ of 109 -CP2B OCT-16

101 -CP2B 02 WORK EZ HAY SPEARS Standard Equipment WORK EZ Hay Spears are designed to MODEL: Work EZ Double Bale Quick compliment most tractors and skid Attach steers that are Universal Quick Hitch Application - Standard duty Compatible for handling round and Weight lbs square hay bales. Weight rating lbs Tractor Horsepower (max) - 80 MODEL: Work EZ Single Bale Quick Hitch - Universal Q/A Attach Hot dipped galvanized frame Application - Standard duty Two replaceable high carbon steel Weight lbs spears Weight rating lbs One welded top stabilizing spear Tractor Horsepower (max) - 80 Hitch - Universal Q/A Hot dipped galvanized frame Replaceable high carbon steel spear Two welded bottom stabilizing spears 95 of 109 -CP2B OCT-16

102 -CP2B 02 WORK EZ HAY SPEARS Models COMMERCIAL MODEL Weight Factory Data List Price WORKEZ SNGL BALE QA 168 LB P17 $ WORKEZ DBL BALE QA 153 LB P65 $ of 109 -CP2B OCT-16

MINNESOTA PRICING SCHEDULE (Typed responses required)

MINNESOTA PRICING SCHEDULE (Typed responses required) MINNESOTA PRICING SCHEDULE (Typed responses required) Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Trueman Welters Jon Ferris 1600

More information

Version of Excel used: Spec # Information Requested Answer

Version of Excel used: Spec # Information Requested Answer PLEASE PURCHAS Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Trueman Welters Seth Strehler 1600 Highway 55 East Buffalo, Mn 55313 763-682-2200 763-682-6141

More information

Replacement Model. ROPS NEW Boomer 35 (T4B) 35. ROPS /CAB NEW Boomer 40 (T4B) 40. ROPS /CAB NEW Boomer 45 (T4B) 45. ROPS /CAB NEW Boomer 50 (T4B) 50

Replacement Model. ROPS NEW Boomer 35 (T4B) 35. ROPS /CAB NEW Boomer 40 (T4B) 40. ROPS /CAB NEW Boomer 45 (T4B) 45. ROPS /CAB NEW Boomer 50 (T4B) 50 Attachment Complete New Holland Compact Model Offering: Current Model Engine HP PTO HP Config Replacement Model Engine HP PTO HP Config Boomer 24 24.4 18.5 (H) ROPS NO CHANGE Boomer 33 (T4B) 32.2 26.4

More information

COMMODITY GROUP 11 NH Ag Compact Utility Tractors (Under 40 Engine HP)

COMMODITY GROUP 11 NH Ag Compact Utility Tractors (Under 40 Engine HP) COMMODITY GROUP 11 NH Ag Compact Utility Tractors (Under 40 Engine HP) Models Discount % List Prices Effective Page No. Boomer 20, 25, 30 & 35 (Tier 3) 24% 9/1/2013 2 23 WORKMASTER 35 & 40 23% 9/1/2013

More information

See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $

See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: CNH AMERICA LLC AMY SWETT 500 DILLER AVENUE NEW HOLLAND PA 17557 717-355-1686 877-269-0114

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used:

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used: SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1118 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) November, 2018 Vendor Name: Contact Person: Street Address: P.O. Bo: City, State, Zip Phone

More information

FARMALL U SERIES TRACTORS TABLE OF CONTENTS

FARMALL U SERIES TRACTORS TABLE OF CONTENTS FARMALL U SERIES TRACTORS FARMALL U SERIES TRACTORS TABLE OF CONTENTS Standard Features... 1 Price List... 3 PARTS DIVISION SUPPLIED ACCESSORIES... 11 TIRE COMBINATIONS FOR FARMALL U TRACTORS.... 12 CASE

More information

NEW HOLLAND BRAND PRODUCTS, U.S. NO A NEW HOLLAND DEALERS WITH MRT AGREEMENT SUBJECT: POWERSTAR SERIES: COMPLETE REVISION EFFECTIVE 10/1/16

NEW HOLLAND BRAND PRODUCTS, U.S. NO A NEW HOLLAND DEALERS WITH MRT AGREEMENT SUBJECT: POWERSTAR SERIES: COMPLETE REVISION EFFECTIVE 10/1/16 October 1, 2016 PRODUCT AND PRICING BULLETIN NEW HOLLAND BRAND PRODUCTS, U.S. NO. 16-66A NEW HOLLAND DEALERS WITH MRT AGREEMENT SUBJECT: POWERSTAR SERIES: COMPLETE REVISION EFFECTIVE 10/1/16 Attached are

More information

NEW HOLLAND BRAND PRODUCTS, U.S. NO A NEW HOLLAND AG DEALERS WITH MRT AGREEMENT

NEW HOLLAND BRAND PRODUCTS, U.S. NO A NEW HOLLAND AG DEALERS WITH MRT AGREEMENT October 1, 2016 PRODUCT AND PRICING BULLETIN NEW HOLLAND BRAND PRODUCTS, U.S. NO. 16-62A NEW HOLLAND AG DEALERS WITH MRT AGREEMENT SUBJECT: WORKMASTER UTILITY TRACTOR SERIES: COMPLETE REVISION - EFFECTIVE

More information

See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $

See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ PLEASE PURCHAS Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Trueman Welters Seth Strehler 1600 Highway 55 East Buffalo, Mn 55313 763-682-2200

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used:

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used: SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 6120E OOS Tractor (101 PTO hp) Equipment for Base Machine

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 6120E OOS Tractor (101 PTO hp) Equipment for Base Machine 6120E OOS Tractor (101 PTO hp) Equipment for Base Machine ENGINE: John Deere PowerTech PWLDiesel Engine In-line 4-Cylinder Wet-Sleeve with High Pressure Common Rail (HPCR) Fuel System and 16 Valve Head

More information

MINNESOTA PRICING SCHEDULE (Typed responses required)

MINNESOTA PRICING SCHEDULE (Typed responses required) MINNESOTA PRICING SCHEDULE (Typed responses required) Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Deere & Company Tamara Hebert 2000

More information

See Special Terms and Conditions - No flat rate allowed Price per Loaded Mile: $4 per loaded mile

See Special Terms and Conditions - No flat rate allowed Price per Loaded Mile: $4 per loaded mile SPEC #422-1214 T-628(5) Tractors, Sub Compact Utility STATE OF MINNESOTA PRICE PAGE (Typed Response Required) December 19, 2014 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

TRACTOR: LOADER-BACKHOE UNIT INFO

TRACTOR: LOADER-BACKHOE UNIT INFO TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Trueman Welters Jon Ferris 1600 Hwy 55

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used:

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used: SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

COMPACT FARMALL A SERIES TRACTORS

COMPACT FARMALL A SERIES TRACTORS COMPACT FARMALL A SERIES TRACTORS RELIABLE. SIMPLE. VERSATILE. Case IH compact Farmall 30A and 35A tractors are rugged, reliable machines that tackle tough chores from loading and mowing to rotary cutting

More information

JOHN DEERE COMMERCIAL PRODUCTS COMPACT UTILITY TRACTORS (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine

JOHN DEERE COMMERCIAL PRODUCTS COMPACT UTILITY TRACTORS (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine ENGINE: Yanmar 3 Cylinder Liquid Cooled Diesel Engine Tier IV EPA Emmissions Certified Engine HP 24.2 (17.8 kw), PS PTO

More information

JOHN DEERE COMMERCIAL PRODUCTS ADVANTAGE COMPACT UTILITY TRACTORS 3005 Tractor Equipment for Base Machine

JOHN DEERE COMMERCIAL PRODUCTS ADVANTAGE COMPACT UTILITY TRACTORS 3005 Tractor Equipment for Base Machine 3005 Tractor Equipment for Base Machine ENGINE: Yanmar Three Cylinder Liquid Cooled Diesel Engine Interim Tier IV EPA Emmissions Certified Engine HP 27.5 (20.2kW)** PTO HP 23.5 (17.5kW) Rated Speed 2700

More information

BACKHOE PRICING INFO

BACKHOE PRICING INFO Price quote for: VENDOR NAME BACKHOE PRICING INFO Ziegler Cat MAKE AND MODEL Caterpillar 416F2 Spec # Description Price 1.0 Price for base unit: $ 62,460.00 2.0 OPERATOR ENVIRONMENT Use this section to

More information

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 5085E Utility Tractor (70 PTO hp) Equipment for Base Machine

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 5085E Utility Tractor (70 PTO hp) Equipment for Base Machine 5085E Utility Tractor (70 PTO hp) Equipment for Base Machine 5085E Equipment for Base Machine ENGINE: 85 (62.5 kw) 97/68/EC Engine Horsepower @ 2400 RPM* 70 (51.5 kw) PTO Horsepower @ 2400 RPM* 4 Cylinder

More information

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine ENGINE: Yanmar 3 Cylinder Liquid Cooled Diesel Engine Tier IV EPA Emmissions Certified Engine HP 22.4 (16.5 kw), PS PTO HP 14.5

More information

Introducing the New Holland WORKMASTER 50-70

Introducing the New Holland WORKMASTER 50-70 Introducing the New Holland WORKMASTER 50-70 Category: TRACTORS Series/Model: Workmaster 50-70 Document: ATA-10739-16 Date: February 2016 1 Key Features New Common Rail, 3-cylinder turbo charged FPT engine

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1016 T-628(5) Tractors, Ag Type Factory Attach. Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Lano Equipment Inc. Anoka Scott Fahey 6340

More information

XR3000 Series XR3032 / XR3032H / XR3037 / XR3037H / XR3037C / XR3037HC Premium Compacts

XR3000 Series XR3032 / XR3032H / XR3037 / XR3037H / XR3037C / XR3037HC Premium Compacts Specifications CATEGORY XR3032 XR3032H XR3037 XR3037H XR3037C XR3037HC ENGINE 3-Cylinder, Indirect-injection, Water-cooled, Turbo, Internal EGR Model(Tier4) ISM N843T-F Engine HP(Gross) 32.2 36.2 36.2

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

TRACTOR: INDUSTRIAL LOADER UNIT INFO

TRACTOR: INDUSTRIAL LOADER UNIT INFO INFORMATION PAGE 570NEP TRACTOR: INDUSTRIAL LOADER UNIT INFO Vendor Name: Titan Machinery Inc Contact Person: Brenden Honebrink Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo,

More information

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 5085E Utility Tractor Equipment for Base Machine

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 5085E Utility Tractor Equipment for Base Machine 5085E Utility Tractor Equipment for Base Machine ENGINE: 85 (62.5 kw) 97/68/EC Engine Horsepower @ 2400 RPM* 70 (51.5 kw) PTO Horsepower @ 2400 RPM* 4 Cylinder Turbocharged John Deere PowerTech PWL Diesel

More information

ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS

ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS Price quote for: ENGINE DRIVEN SNOW BLOWER & ATTACHMENTS Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Trueman Welters Seth Strehler

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) SEQ # 725-417 Price quote for: (Typed Responses Required) MUNICIPAL UTILITY TRACTOR 1 of 10 Vendor Name: Contact Person: Scott Reierson Street Address: 333 2nd Street NE P.O. Box: City, State, Zip Hopkins,

More information

EXTERIOR. The PX series combines modern design and robust functionality into one powerful workhorse.

EXTERIOR. The PX series combines modern design and robust functionality into one powerful workhorse. EXTERIOR The PX series combines modern design and robust functionality into one powerful workhorse. 1 2 3 Projection Lamp Newly designed headlights allows the operator to work safely in low light conditions.

More information

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine ENGINE: Yanmar 3 Cylinder Liquid Cooled Diesel Engine Tier IV EPA Emissions Certified Engine HP 22.4 (16.5 kw), PS PTO HP 14.5 (11.4

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) 1 of 7 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: ABM Equipment & Supply, LLC. Contact Person: Scott Reierson Street Address: 333 2nd Street NE P.O. Box: City, State, Zip Hopkins, MN 55343

More information

MAX SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003

MAX SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003 MAX SERIES #1 Selling Tractor in the World 7-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 VERSATILITY - Max Series Industry-redefining eco-friendly

More information

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required)

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) SEQ # 727-417 Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) April, 2017 quote for: TRACTOR: SKID STEERS AND OEM ATTACHMENTS Vendor Name:

More information

SERIES TRACTORS FARMALL UTILITY C SERIES TRACTORS

SERIES TRACTORS FARMALL UTILITY C SERIES TRACTORS SERIES TRACTORS FARMALL UTILITY C SERIES TRACTORS FARMALL UTILITY C 2 FARMALL UTILITY C SERIES TRACTORS 6 Models 64 117 HP * 50 100 PTO HP * READY TO WORK AS HARD AS YOU. Since 1923, the Farmall tractor

More information

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine ENGINE: Yanmar 3 Cylinder Liquid Cooled Diesel Engine Tier IV EPA Emissions Certified Engine HP 22.4 (16.5 kw), PS PTO HP 14.5 (11.4

More information

KIOTI UTILITY TRACTOR NX4510/NX5010/NX5510/NX6010

KIOTI UTILITY TRACTOR NX4510/NX5010/NX5510/NX6010 NX6010CH (Cab) NX6010 (ROPS) KIOTI UTILITY TRACTOR NX4510/NX5010/NX5510/NX6010 Modern and Elegant Design The modern and elegant hood design provides the operator with excellent visibility and enables quick

More information

BACKHOE PRICING INFO

BACKHOE PRICING INFO Price quote for: VENDOR NAME BACKHOE PRICING INFO Ziegler Cat MAKE AND MODEL Caterpillar 420F2 Spec # Description Price 1.0 Price for base unit: $ 71,490.00 2.0 OPERATOR ENVIRONMENT Use this section to

More information

16 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty DEMING PRIZE 2003

16 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty DEMING PRIZE 2003 16 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 PREMIUM - 16 Series The Mahindra

More information

60 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty DEMING PRIZE 2003

60 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty DEMING PRIZE 2003 60 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 PREMIUM - 60 Series The Mahindra

More information

LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm

LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40

More information

145 HP, FRONT WHEEL ASSIST TRACTOR 3/17/15 Page 1. Mountrail County Road and Bridge SPECIFICATIONS FOR

145 HP, FRONT WHEEL ASSIST TRACTOR 3/17/15 Page 1. Mountrail County Road and Bridge SPECIFICATIONS FOR Page 1 Mountrail County Road and Bridge S FOR Bidder's Instructions: Indicate compliance to the specifications on the YES/NO line by each specification. Indicate any deviations from the specifications

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1118 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) November, 2018 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip

More information

Tier 4 Engine. Clean and Powerful

Tier 4 Engine. Clean and Powerful Eco-Friendly Diesel Engine The Common Rail Diesel Engine (CRDI) improves fuel effciency while reducing noise levels. With this eco-friendly Tier 4 engine, the RX Series offers the operator a quiet work

More information

60 SERIES CONVENIENCE

60 SERIES CONVENIENCE 60 SERIES CONVENIENCE Turbocharged, intercooled Easily accessible engine Tier III compliant Dual Speed PTO on models WD 2WD WD Engine Left side view Sleek & powerful headlamps Additional halogen lamps

More information

3500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003

3500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003 3500 SERIES #1 Selling Tractor in the World 7-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 PREMIUM - 3500 Series The Mahindra 3500 series premium

More information

MAX SERIES - TIER IV

MAX SERIES - TIER IV MAX SERIES - TIER IV #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 VERSATILITY - Max

More information

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required)

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) SEQ # 727-417 Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) April, 2017 quote for: TRACTOR: SKID STEERS AND OEM ATTACHMENTS Vendor Name:

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

1500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003

1500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003 1500 SERIES #1 Selling Tractor in the World 7-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 PREMIUM - 1500 Series High-performance premium 4WD,

More information

35 SERIES CONVENIENCE

35 SERIES CONVENIENCE 5 SERIES CONVENIENCE Ease of access: for radiator, battery check, filter replacement, oil check the hood opens vertically & side panels come off quickly. No tools required. 55 WD 05 WD 505 WD Engine Left

More information

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 5085E Utility Tractor (70 PTO hp) Equipment for Base Machine

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 5085E Utility Tractor (70 PTO hp) Equipment for Base Machine 5085E Utility Tractor (70 PTO hp) Equipment for Base Machine 5085E Equipment for Base Machine ENGINE: 85 (62.5 kw) 97/68/EC Engine Horsepower @ 2400 RPM* 70 (51.5 kw) PTO Horsepower @ 2400 RPM* 4 Cylinder

More information

3500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty

3500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty 3500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 PREMIUM - 3500 Series The

More information

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 3046R Compact Utility Tractor (34 PTO hp) Equipment for Base Machine

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 3046R Compact Utility Tractor (34 PTO hp) Equipment for Base Machine 3046R Compact Utility Tractor (34 PTO hp) Equipment for Base Machine ENGINE: Yanmar Liquid Cooled Diesel Engine Tier IV EPA Emissions Certified Engine HP 45.3 (33.3 kw) PTO HP 34.1 (25.4 kw) HST Engine

More information

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine

JOHN DEERE TURF & UTILITY PRODUCTS COMPACT UTILITY TRACTORS 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine 1023E Sub-Compact Utility Tractor (15 PTO hp) Equipment for Base Machine ENGINE: Yanmar 3 Cylinder Liquid Cooled Diesel Engine Tier IV EPA Emmissions Certified Engine HP 22.4 (16.5 kw), PS PTO HP 14.5

More information

mpowertm SERIES #1 Selling Tractor in the World 5-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003

mpowertm SERIES #1 Selling Tractor in the World 5-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 mpowertm SERIES #1 Selling Tractor in the World 5-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 HEAVY-DUTY PERFORMANCE AND POWER - mpower Series

More information

STANDARD FEATURES AND OPTIONS

STANDARD FEATURES AND OPTIONS STANDARD FEATURES AND OPTIONS Wide Operators Platform Fold down ROPS Removable Radiator Screen Deluxe Adjustable Seat Hydrostatic Steering Dual Hydraulic Pumps Steel Hood, Fenders / Powder Coat Finish

More information

Spec # Information Requested Answer

Spec # Information Requested Answer PLEASE PURCHAS Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Deere & Company Tamara Hebert 2000 John Deere Run Cary, NC 27513 800-358-5010,

More information

WHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version

WHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version ZW series Parallel linkage tool carrier version WHEEL LOADER WHEEL LOADER Model Code: ZW140PL / ZW150PL / ZW1PL Operating Weight: ZW140PL: 11 950-12 010 ZW150PL: 13 370-13 400 ZW1PL: 15 240-15 430 Bucket

More information

2500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003

2500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003 2500 SERIES #1 Selling Tractor in the World 7-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 2500 Series Economical and easy to operate

More information

UTILITY FARMALL U SERIES TRACTORS

UTILITY FARMALL U SERIES TRACTORS UTILITY FARMALL U SERIES TRACTORS 2 READY TO WORK AS HARD AS YOU. Since 1923, the Farmall tractor name has meant power, performance, durability and value. The utility Farmall U tractors offer the ultimate

More information

Premium Diesel Engine. Four Wheel Drive

Premium Diesel Engine. Four Wheel Drive KIOTI SUB-COMPACT TRACTOR CS2610 Premium Diesel Engine Four Wheel Drive Headlights A 26 HP optimized combustion diesel engine has large power output yet low fuel consumption. Fluid service and inspection

More information

2600SERIES HP Tractor WORLD S #1 SELLING TRACTOR MORE POWER, PERFORMANCE & VALUE

2600SERIES HP Tractor WORLD S #1 SELLING TRACTOR MORE POWER, PERFORMANCE & VALUE 2600SERIES 38-65 HP Tractor MORE POWER, PERFORMANCE & VALUE WORLD S #1 SELLING TRACTOR TOP 5 MAJOR ADVANTAGES NO DIESEL PARTICULATE FILTER Eliminates lost time, maintenance, and high heat for better overall

More information

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 5083EN Narrow Specialty Tractor (69 PTO hp) Equipment for Base Machine

AGRICULTURAL PRODUCTS JOHN DEERE TRACTORS 5083EN Narrow Specialty Tractor (69 PTO hp) Equipment for Base Machine 5083EN Narrow Specialty Tractor (69 PTO hp) Equipment for Base Machine ENGINE: 83 (61kW) Gross Engine Horsepower @ 2400 RPM* 69 (51kW) PTO Horsepower at 2400 RPM* 4 Cylinder Turbocharged John Deere PowerTech

More information

Titan Machinery Case 21F 1 of 45

Titan Machinery Case 21F 1 of 45 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Inc Brenden Honebrink 644 East Beaton Drive West Fargo, ND 58078-2648 952-445-5400

More information

CTSERIES CT28 CT36 CT41 CT47 SYNCHRO SHUTTLE I HYDROSTATIC

CTSERIES CT28 CT36 CT41 CT47 SYNCHRO SHUTTLE I HYDROSTATIC CTSERIES CT28 CT36 CT41 CT47 SYNCHRO SHUTTLE I HYDROSTATIC Power and Performance The Perfect Fit The McCormick CT a new breed of power in the compact line of tractors With four horsepower sizes offered

More information

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) SEQ # 725417 April, 2017 STATE OF MINNESOTA PRICING PAGE FIXED PRICE (Typed Responses Required) 1 of 6 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: Minnesota Equipment Contact Person: Dan Scharber

More information

DL250 TECHNICAL DATA

DL250 TECHNICAL DATA DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

JOHN DEERE COMMERCIAL PRODUCTS COMPACT UTILITY TRACTORS (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine

JOHN DEERE COMMERCIAL PRODUCTS COMPACT UTILITY TRACTORS (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine (MY2013) 1025R Sub-Compact Utility Tractor (18 PTO hp) Equipment for Base Machine ENGINE: Yanmar 3 Cylinder Liquid Cooled Diesel Engine Tier IV EPA Emmissions Certified Engine HP 24.2 (17.8 kw), PS PTO

More information

TRACTOR: LOADER-BACKHOE UNIT INFO

TRACTOR: LOADER-BACKHOE UNIT INFO TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: RDO Equipment Company / Nortrax Jesse

More information

New Holland Commercial Front Mowers MC22 MC28 MC35

New Holland Commercial Front Mowers MC22 MC28 MC35 New Holland Commercial Front Mowers MC22 MC28 MC35 High-production mowing and long-lasting construction Get it all in a New Holland commercial front mower. From sun up to sunset, a commercial mower is

More information

Municipal Utility Tractor

Municipal Utility Tractor Price quote for: PRICE PAGE METHOD # 1: FIXED PRICE BASE UNIT (Typed Responses Required) Municipal Utility Tractor 1 of 3 Vendor Name: ABM EQUIPMENT & SUPPLY, LLC. Contact Person: SCOTT REIERSON Street

More information

MAX SERIES. #1 Selling Tractor in the World 5-year Powertrain Warranty. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating

MAX SERIES. #1 Selling Tractor in the World 5-year Powertrain Warranty. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating MAX SERIES MAH5205_Series_Intro_MaxSeries_060314 #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY

More information

2500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty

2500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty 2500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 2500 Series Economical

More information

TRACTOR: LOADER-BACKHOE UNIT INFO

TRACTOR: LOADER-BACKHOE UNIT INFO TRACTOR: LOADER-BACKHOE UNIT INFO November 2014 Vendor Name: Titan Machinery Inc. Contact Person: Fred Senger & Andy Bethel Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo,

More information

TRACTOR: LOADER-BACKHOE

TRACTOR: LOADER-BACKHOE Seq. #726612 Price quote for: TRACTOR: LOADERBACKHOE Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Ziegler Inc. Jeff Drake, Richard

More information

521F/XT/XR ARTICULATED

521F/XT/XR ARTICULATED 521F/XT/XR ARTICULATED WHEEL LOADER TIER 4 INTERIM CERTIFIED PRELIMINARY engine Model CNH CFPXL04.5SCB, F4HFE413J Tier4a/Stage 3b 4-stroke, turbocharged Type Cylinders 4 Bore/Stroke 4.09 in x 5.20 in (104

More information

STATE OF MINNESOTA PRICING PAGE - METHOD # 1 (Typed Responses Required) Skid Steers. Front clearance circle with standard bucket

STATE OF MINNESOTA PRICING PAGE - METHOD # 1 (Typed Responses Required) Skid Steers. Front clearance circle with standard bucket Price quote for: Skid Steers Vendor Name: L & L Rentals Inc. Contact Person: Kyle Lind/ Cliff Lind Street Address: 11461 Spudville Road P.O. Box: City, State, Zip Hibbing, MN 55746 Phone #: 218-262-5232

More information

FARMALL 100A SERIES TRACTORS

FARMALL 100A SERIES TRACTORS FARMALL 100A SERIES TRACTORS ONE MULTI-TASKER DESERVES ANOTHER. From field to feedlot, you need a tractor that can multi-task as well as you do. Case IH Farmall 100A series tractors are tough, reliable,

More information

STATE OF MINNESOTA PRICING PAGE - METHOD # 1 (Typed Responses Required) PLEASE PURCHASE Excel Export To Multiple PDF Files Software.

STATE OF MINNESOTA PRICING PAGE - METHOD # 1 (Typed Responses Required) PLEASE PURCHASE Excel Export To Multiple PDF Files Software. PLEASE PURCHASE Excel Export To Multiple PDF Files Software Price quote for: Skid Steers Vendor Name: Ziegler Inc. Contact Person: Brad Sewell Street Address: 901 West 94th Street P.O. Box: City, State,

More information

S P E C I F I C A T I O N S

S P E C I F I C A T I O N S S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m

More information

It all happens by design

It all happens by design KIOTI Utility Tractor It all happens by design The newly designed hood and fender add distinctive lines to the DKSE Series tractors. DKSE Series 40 hp to 50 hp high-performance utility tractors pack impressive

More information

ARTICULATING WHEEL LOADER PRICE SCHEDULE (Typed responses required)

ARTICULATING WHEEL LOADER PRICE SCHEDULE (Typed responses required) Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Ziegler Inc. Jeff Drake, Jeff Schmidt 901 W. 94th Street Minneapolis, MN 55420

More information

emax S 20 HP Sub-Compact Tractor WORLD S #1 SELLING TRACTOR SERIES MORE POWER, PERFORMANCE & VALUE

emax S 20 HP Sub-Compact Tractor WORLD S #1 SELLING TRACTOR SERIES MORE POWER, PERFORMANCE & VALUE emax S 20 HP Sub-Compact Tractor MORE POWER, PERFORMANCE & VALUE SERIES WORLD S #1 SELLING TRACTOR TOP 5 MAJOR ADVANTAGES mcomfort SEAT Extra padding with integrated armrests and retractable belt for ultimate

More information

Distinctive design The curved hood and fender add distinctive lines to the CK Series tractors.

Distinctive design The curved hood and fender add distinctive lines to the CK Series tractors. KIOTI Compact Tractor Distinctive design The curved hood and fender add distinctive lines to the CK Series tractors. The CK Series line of 20 hp to 35 hp distinctively designed compact utility tractors

More information

STATE OF MINNESOTA PRICING PAGE - METHOD # 1 (Typed Responses Required)

STATE OF MINNESOTA PRICING PAGE - METHOD # 1 (Typed Responses Required) Price quote for: SKID/TRACK LOADERS & OEM ATTACHMENTS Vendor Name: Ziegler Inc. Contact Person: Cory Dalbec Street Address: 901 West 94th Street P.O. Box: City, State, Zip Bloomington, MN 55420 Phone #:

More information

emax S 20 HP Sub-Compact Tractor WORLD S #1 SELLING TRACTOR SERIES MORE POWER, PERFORMANCE & VALUE

emax S 20 HP Sub-Compact Tractor WORLD S #1 SELLING TRACTOR SERIES MORE POWER, PERFORMANCE & VALUE emax S 20 HP Sub-Compact Tractor MORE POWER, PERFORMANCE & VALUE SERIES WORLD S #1 SELLING TRACTOR TOP 5 MAJOR ADVANTAGES mcomfort SEAT Extra padding with integrated armrests and retractable belt for ultimate

More information

5500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Limited Powertrain Warranty DEMING PRIZE 2003

5500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Limited Powertrain Warranty DEMING PRIZE 2003 5500 SERIES #1 Selling Tractor in the World 5-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 UTILITY - 5500 Series The Mahindra 5500 series tractors

More information

Specifications. Specifications KIOTI TRACTOR. Optional Equipment. Attachments 10SE SERIES. Standard Equipment. Optional Equipment.

Specifications. Specifications KIOTI TRACTOR. Optional Equipment. Attachments 10SE SERIES. Standard Equipment. Optional Equipment. CK510SE HC/CK4010SE HC KIOTI TRACTOR End Loader Backhoe The KIOTI KL4020 front end loader is specifically designed for the CK10SE Series model tractors, providing efficient performance with single lever

More information

1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation

1021F/XR. Transmission: 4F/ 3R Proportional w/ Electronic Control Module torque sensing autoshift /manual shift and modulation 1021F/XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Case / FPT Model F2CFE614C Tier 4 interim certified Type 4-stroke, turbocharged Cylinders 6-cylinder in-line Bore / Stroke 4.61 in x 5.31 in (177

More information

DL350 TECHNICAL DATA

DL350 TECHNICAL DATA DL350 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL08 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER (GROSS) hp / rpm 232 / 2,000 (SAE J1995) kw / rpm 172 / 2,000 RATED

More information

6000SERIES. 65 & 75 HP Tractor WORLD S #1 SELLING TRACTOR MORE POWER, PERFORMANCE & VALUE

6000SERIES. 65 & 75 HP Tractor WORLD S #1 SELLING TRACTOR MORE POWER, PERFORMANCE & VALUE 6000SERIES 65 & 75 HP Tractor MORE POWER, PERFORMANCE & VALUE WORLD S #1 SELLING TRACTOR TOP 5 MAJOR ADVANTAGES NO DIESEL PARTICULATE FILTER Eliminates lost time, maintenance and high heat for better overall

More information

STATE OF MINNESOTA PRICING PAGE - METHOD # 1 (Typed Responses Required) PLEASE PURCHASE Excel Export To Multiple PDF Files Software.

STATE OF MINNESOTA PRICING PAGE - METHOD # 1 (Typed Responses Required) PLEASE PURCHASE Excel Export To Multiple PDF Files Software. PLEASE PURCHASE Excel Export To Multiple PDF Files Software Price quote for: Skid Steers Vendor Name: Ziegler Inc. Contact Person: Brad Sewell Street Address: 901 West 94th Street P.O. Box: City, State,

More information

121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED

121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED 121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 C*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3

More information

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required)

State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) SEQ # 727-512 Tractors: Skid Steers OEM Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) May, 2012 quote for: TRACTORS: SKID STEERS AND OEM ATTACHMENTS Vendor

More information

L3301/L3901/L4701 KUBOTA DIESEL TRACTOR

L3301/L3901/L4701 KUBOTA DIESEL TRACTOR L KUBOTA DIESEL TRACTOR L3301/L3901/L4701 More power, cleaner emissions and a bold new look put the new Standard L-Series tractors at the top of their class. STANDARD L From power to performance, the new

More information

621E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation

621E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation 621E/XT/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV, 667TA/EDB, Tier III certified 4-stroke, turbocharged and air to air cooled Cylinders 6 Bore/Stroke 4.11 in x 5.20

More information

30 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty DEMING PRIZE 2003

30 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty DEMING PRIZE 2003 30 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 UTILITY - 30 Series The Mahindra

More information