Optical Tables and Vibration Control. ND01 Series. Dimensions [in. (mm)] Model (Metric) A B ND01-A (M-ND01-A) 2.00 (50.0) 1.00 (25.
|
|
|
- Victor Waters
- 5 years ago
- Views:
Transcription
1 1 NewDamp Constant Natural Frequency Elastomeric Isolators ND1 Series ND1- supports up to 2 lbs. and provides excellent CNF (constant natural frequency) characteristics: the vertical natural frequency is virtually constant at approximately 22 Hz for loads above 7 lbs. per isolator. This compact size isolator ensures excellent horizontal isolation with natural frequencies of to 7 Hz and minimum resonance amplification. The typical isolation characteristics are shown. ND1- (M-ND1-) Load per Isolator [lb (kg)] 7 (3) 2 (11) Load Range (set of 4) [lb (kg)] 28 (12) 1 (46) Vertical Horizontal 7 Height, Isolator [in. (cm)] 1.36 (3.) Base Dimension [in. (cm)] 2. x 1. (6.4 x 3.8) Breadboard, Microlock Model ND (34.9) 1. (38.1) B CLR FOR M6 (63.) M6 X DI (41.28) SECTION - B ND1- (M-ND1-) 2. (.) 1. (2.) ND1- LOD (lbs) HORIZONTL TRNSMISSIBILITY (db) VERTICL TRNSMISSIBILITY (db) LOD PER ISOLTOR (lb) TECHNICL REFERENCE OPTICL TBLES BREDBORDS HONEYCOMB, GRNITE ND GRID PLTFORMS ND RIGID STRUCTURES ISOLTORS WORKSTTIONS ND ISOLTED PLTFORMS STRUCTURL RILS ND CRRIERS TESTING, NLYSIS ND DESIGN
2 16 Optical Tables and Vibration Control TECHNICL REFERENCE OPTICL TBLES BREDBORDS ND GRID PLTFORMS HONEYCOMB, GRNITE ND RIGID STRUCTURES NewDamp ND2 and ND3 Series These isolators are based on conical elastic elements. They provide almost equal isolation in vertical and horizontal directions. Within the same design envelope, they provide stiffer, higher load (ND3-); and softer, lower load (ND2-) options. By using custom profiled upper supports, these isolators can be easily tuned to particular load/frequency requirements. Model ND B B CLERNCE FOR M6 ND2- (M-ND2-) M6 X 1. 3 PL ND3- (M-ND3-) Load per Isolator [lb (kg)] 4 (2) 2 (11) 7 (3) 3 (13) Load Range (set of 4) [lb (kg)] 18 (8) 1 (46) 28 (12) 12 (4) Vertical Horizontal Height, Isolator [in. (cm)] 3.28 (8.3) 3.28 (8.3) Base Dimension [in. (cm)] 4. x 4. (11.4) 4. x 4. (11.4) Breadboard, Microlock Breadboard, Microlock ND3- NewDamp Elastomeric Isolator. Customized ND2 NewDamp Elastomeric Isolator. LOD (lb) ND2- ND ISOLTORS WORKSTTIONS ND ISOLTED PLTFORMS 4.3 (19.2) Model ND3-4. B B CLERNCE FOR M6 M6 X 1. 3 PL SECTION (83.2) B ND2- (M-ND2-) 4. (1.) 1. (37.) ND3- (M-ND3-) 4. (1.) 1. (37.) ND2- ND LOD (lb) 4. STRUCTURL RILS ND CRRIERS 4.3 (19.2) 3.28 (83.2) TESTING, NLYSIS ND DESIGN SECTION - Phone: Fax:
![NewDamp ND41 Series ND4 and ND41 Series 4 3 2 1 ND41- (M-ND41-) ND41 ND4 LOD (lb) 4 3 2 1 ND41 ND4 ND41-B (M-ND41-B) Load per Isolator [lb (kg)] 7 (3) 22 (1) 7 (3) 22 (1) Load Range (set of 4) [lb](/docs-images/87/97332469/images/3-1.jpg "(kg)] 28 (12) 9 (4) 28 (12) 9 (4) Vertical 12 21 12 21 Horizontal 4 6 4 6 Height, Isolator [in. (cm)] 2.2 (.7) 2.2 (.7) Base Dimension [in. (cm)] 3. x 3. (7.6 x 7.6) 2. x 2. (6.4 x 6.")
3 17 ND4 and ND41 Series These isolators are based on cylindrical elements. They are the best option for applications requiring good isolation and short settling time with respect to horizontal motions while maintaining low tilt due to moving loads. NewDamp ND41 Series ND4 and ND41 Series ND41- (M-ND41-) ND41 ND4 LOD (lb) ND41 ND4 ND41-B (M-ND41-B) Load per Isolator [lb (kg)] 7 (3) 22 (1) 7 (3) 22 (1) Load Range (set of 4) [lb (kg)] 28 (12) 9 (4) 28 (12) 9 (4) Vertical Horizontal Height, Isolator [in. (cm)] 2.2 (.7) 2.2 (.7) Base Dimension [in. (cm)] 3. x 3. (7.6 x 7.6) 2. x 2. (6.4 x 6.4) Breadboard, Microlock X9 Rail Breadboard, Microlock ND Settling Time vs. Other Isolators remarkable property of NewDamp isolators is their ability to quickly attenuate the transient motions, thereby reducing the settling time of the equipment after the stage movements or other disturbances. The following comparison was made for a dual-axis air bearing stage mounted on a granite basis (total weight: 8 kg) and supported by four NewDamp ND4 isolators. NewDamp ND4 Series ND4- (M-ND4-) ND4-B (M-ND4-B) Load per Isolator [lb (kg)] 1 (4) 4 (2) 1 (4) 4 (2) Load Range (set of 4) [lb (kg)] 4 (18) 18 (8) 4 (18) 18 (8) Vertical Horizontal Height, Isolator [in. (cm)] 2.63 (6.7) 2.63 (6.7) Base Dimension [in. (cm)] 3. x 3. (7.6 x 7.6) 2. x 2. (6.4 x 6.4) Breadboard, Microlock X9 Rail Breadboard, Microlock Customized ND41 NewDamp Elastomeric Isolator. ND4 Basis Motion (µm) Other Elastomer Basis motion (µm) Custom machine isolators Time (s) Time (s) TECHNICL REFERENCE OPTICL TBLES BREDBORDS HONEYCOMB, GRNITE ND GRID PLTFORMS ND RIGID STRUCTURES ISOLTORS WORKSTTIONS ND ISOLTED PLTFORMS LOD (lb) Custom machinery feet offer high horizontal damping with vertical stiffness. STRUCTURL RILS ND CRRIERS TESTING, NLYSIS ND DESIGN
4 TECHNICL REFERENCE 18 Optical Tables and Vibration Control Model ND4-3. CLERNCE FOR M6 M6 X 1. Model ND4-B CLERNCE FOR M6 M6 X (63.) OPTICL TBLES (63.) ø DI BREDBORDS ND GRID PLTFORMS 2.63 (66.7) SECTION (66.7) SECTION - HONEYCOMB, GRNITE ND RIGID STRUCTURES B ND4- (M-ND4-) 2. (.) 1. (2.) ND4-B (M-ND4-B) 2. (.) 1. (2.) Model ND41-3. CLERNCE FOR M6 M6 X 1. Model ND41-B CLERNCE FOR M6 M6 X 1. ISOLTORS ) (63.) 2.7 DI 2.7 DI WORKSTTIONS ND ISOLTED PLTFORMS 2.2 (7.2) SECTION (7.2) SECTION - STRUCTURL RILS ND CRRIERS B ND41- (M-ND41-) 2. (.) 1. (2.) ND41-B (M-ND41-B) 2. (.) 1. (2.) TESTING, NLYSIS ND DESIGN Phone: Fax:
5 19 NewDamp ND Series These isolators are based on conical elastic elements designed for low load applications. The ND supports loads up to 4 lbs. ND- (M-ND-) Load per Isolator [lb (kg)] 17 (8) 28 (13) Load Range (set of 4) [lb (kg)] 68 (32) 112 () Vertical <12 Horizontal 8 1 Height, Isolator [in. (cm)] 1.3 (3.3) Base Dimension [in. (cm)] 2.4 x 2.4 (6.4 x 6.4) Breadboard, Microlock NewDamp ND6 Series The ND6 isolators are based on conical elastic elements designed for low load applications. ND's supports loads of up to 17 lbs. (8 kg). ND6- Load per Isolator [lb (kg)] 13 (6) 17 (8) Load Range (set of 4) [lb (kg)] 2 (24) 68 (32) Vertical 9 13 Horizontal 9 13 Height, Isolator [in. (cm)] 1.3 (3.3) Base Dimension [in. (cm)] 2.4 x 2.4 (6.4 x 6.4) Breadboard, Microlock (universal mounting plate) ND Series Deflection, in. Natural Frequency, Hz ND- load-deflection curve Loading Unloading Load per isolator, lbs. Natural frequency of vertical vibration vs. load Load per isolator, lbs. TECHNICL REFERENCE OPTICL TBLES BREDBORDS HONEYCOMB, GRNITE ND GRID PLTFORMS ND RIGID STRUCTURES Model ND- 2.4 (61.) REF B THD.26 (6.8) 4 PL REF ISOLTORS WORKSTTIONS ND ISOLTED PLTFORMS 1.3 (33.) REF STRUCTURL RILS ND CRRIERS SECTION - Thread B Thd ND- (M-ND-) 2. (.).22 (.) 1-24 NC-2 (M-.8) TESTING, NLYSIS ND DESIGN
X95 Structural Rails and Carriers CXL (M-CXL95-120) CXL95-80 (M-CXL95-80) CXL95-50 (M-CXL95-50)
TECHNICAL REFERENCE 1074 X95 Structural Rails and Carriers CXL95-120 (M-CXL95-120) CXL95-80 (M-CXL95-80) CXL95-50 (M-CXL95-50) Ideal for constructing large-scale, linear optical devices Rigid yet lightweight
WIRE ROPE ISOLATORS C/CB SERIES APPLICATIONS HELICAL WIRE ROPE ISOLATORS FEATURES & BENEFITS
0.03-1.50 APPLICATIONS HELICAL The C/CB Series isolators are made up of helical, stranded-wire rope held with rugged metal retaining bars. This design provides excellent shock and vibration isolation in
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION
USING STANDARD ISOLATORS TO CONTROL UNWANTED MACHINE VIBRATION From small medical pumps to large diesel engines, vibration is unavoidable and dangerous if left unchecked in rotating and oscillating machinery.
Toll Free: 877/ Fax: 814/
Low Profile Avionics Mounts (AM ) Low profile, all-direction vibration and shock mounts for avionics equipment and other sensitive devices Lord Corporation low profile Avionics Mounts (AM ) set the standard
Isolators. F D = C Ẋ α. The concepts of isolation system can be best understood by presenting damper design first, followed by the isolation systems.
Isolators The concepts of isolation system can be best understood by presenting damper design first, followed by the isolation systems. 1. DAMPER TYPES A conventional high performance fluid damper is depicted
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Rugged, high load capacity mounts provide vibration, shock and noise protection A P P L I C A T I O N S Cabs/platforms Engines Generator sets Transmissions Compressors Fuel tanks
CYLINDRICAL STUD MOUNT SERIES
CYLINDRICAL STUD MOUNT SERIES Versatile, low-cost, lightweight stud type mounts for vibration, shock, noise control, and motion accommodation. APPLICATIONS Fans Appliances HVAC equipment Electronic equipment
INDUSTRIAL CONICAL MOUNTS
INDUSTRIAL CONICAL MOUNTS Features One piece bonded construction High load capacity Low natural frequency Non-linear stiffness Snubbing feature on bottom Benefits Consistent performance Rugged, high load
22000 MOUNT SERIES. Features. Benefits. Load Range. Low-profile, high capacity mounts for vibration and shock protection.
2 MOUNT SERIES Low-profile, high capacity mounts for vibration and shock protection. Features Fail-safe when used with snubbing washer Axial to radial stiffness of 1:1 Low natural frequency Sturdy, reliable
Oscillating Mountings
Type HS for hanging screens H B F E HS 7 38 D A HS 45 50 HS 50- Z C G M L M L M L Art. o. Type Load capacity Gmin. G [] A unloaded A* load B unloaded B* load C D E F H L M Weight [kg] 07 311 001 HS 7 500
UMR Series Precision Double-Row Ball Bearing Linear Stages. Angular Deviation
877 UMR Series Precision ouble-row Ball Bearing Linear Stages Shown with optional M-PBN Base Plate and UTR Series Rotation Stage (Order actuators, rotation stage and base plates separately) Low-profile
Structural Dynamic Behaviour of Tyres
XIX CNIM 15-16/11 Castellón Structural Dynamic Behaviour of Tyres Paul Sas Noise & Vibration Engineering Research Group KU.Leuven, Dept. Mechanical Engineering, Div. PMA Road traffic noise Vehicle noise:
Designing for Quiet, Vibration-Free Operation
Designing for Quiet, Vibration-Free Operation By Neil Plesner Market Development Manager E-A-R Indianapolis, Indiana DESIGNING FOR QUIET, VIBRATION-FREE OPERATION A common problem associated with many
Active Isolation System AIS
Active Isolation System AIS Active electronic-pneumatic vibration insulation system with powerful real-time control for the highest demands on effective insulation, deflection and constant level. n Active
MODEL : 55A240IUBEM ROTARY COMPRESSOR SPECIFICATION SHEET 1. APPLICATION 2. COMPRESSOR DATA 3. MOTOR DATA 4. ELECTRICAL COMPONENTS
SPECIFICATION SHEET 1. APPLICATION H/P & Cooling Type Air conditioner Rated & Frequency... 208~230V 1Φ 60Hz Refrigerant.. R-22 2. COMPRESSOR DATA Pump Type Rolling Piston Type Displacement. 33.43cc/rev
EFFECTIVE SOLUTIONS FOR SHOCK AND VIBRATION CONTROL
EFFECTIVE SOLUTIONS FOR SHOCK AND VIBRATION CONTROL Part 1 Alan Klembczyk TAYLOR DEVICES, INC. North Tonawanda, NY Part 2 Herb LeKuch Shocktech / 901D Monsey, NY SAVIAC Tutorial 2009 Part 1 OUTLINE Introduction
V MOUNT SERIES. Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations.
V MOUNT SERIES Engine mounts isolate vibration, absorb shock and attenuate noise due to structure-borne vibrations. APPLICATIONS Class 6,7,8 truck engines Bus engines Off-highway vehicle engines On & off-highway
ADRS Series Mechanical-Bearing Rotary Stage
ADRS Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free slotless motor design for outstanding velocity stability Direct coupled, high-accuracy rotary
CHAPTER 6 MECHANICAL SHOCK TESTS ON DIP-PCB ASSEMBLY
135 CHAPTER 6 MECHANICAL SHOCK TESTS ON DIP-PCB ASSEMBLY 6.1 INTRODUCTION Shock is often defined as a rapid transfer of energy to a mechanical system, which results in a significant increase in the stress,
ANTI VIBRATION MOUNTS
ANTI VIBRATION MOUNTS Insulators The insulators, because of their electrically insulating property, are used for the bearing of blasts, airconditioning units and fans. The fact that they can be anchored
Loaded Car Hunting and Suspension Systems
Loaded Car Hunting Mechanical Association Railcar Technical Services Loaded Car Hunting and Suspension Systems 18 September 2009 Jay P. Monaco Vice President Engineering Amsted Rail Company, Inc. Loaded
FAEBI Rubber air spring insulator Highly effective insulation of vibrations, shocks and structure borne noise for machines, apparatus and aggregates.
FAEBI Rubber air spring insulator Highly effective insulation of vibrations, shocks and structure borne noise for machines, apparatus and aggregates. 39 FAEBI RUBBER AIR SPRING INSULATOR FAEBI rubber air
ADRS Series Mechanical-Bearing Rotary Stage
ADRS Series Mechanical-Bearing Rotary Stage High torque output, direct-drive brushless servomotor Cog-free slotless motor design for outstanding velocity stability Direct coupled, high-accuracy rotary
SMAC ISOLATORS CATALOGUE
SMAC ISOLATORS CATALOGUE Building together future solutions Indice F Overview SMAC is a dynamic company specializing in the analysis, design and manufacturing of complex rubber parts for demanding fields
Air Springs for Industrial Applications
Air Springs for Industrial Applications Air Spring Overview ITT air springs are air-tight and sturdy pneumatic actuators for demanding industrial applications. Air springs are highly durable, precisely
CHAPTER 1 BALANCING BALANCING OF ROTATING MASSES
CHAPTER 1 BALANCING Dynamics of Machinery ( 2161901) 1. Attempt the following questions. I. Need of balancing II. Primary unbalanced force in reciprocating engine. III. Explain clearly the terms static
Assessing Pavement Rolling Resistance by FWD Time History Evaluation
Assessing Pavement Rolling Resistance by FWD Time History Evaluation C.A. Lenngren Lund University 2014 ERPUG Conference 24 October 2014 Brussels 20Nm 6 Nm 2 Nm Background: Rolling Deflectometer Tests
The perfect solution for boat propulsion.
The perfect solution for boat propulsion. A propulsion system wich reduces noise up to 90% Simplifies engine/gearbox installations remarkably Alignment procedure can be performed with measure by the eye
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
Precision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
Kawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HM(HD)B 270 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3
Lightweight. Geislinger Gesilco
Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
Spring Mounts Damped Type To 200 lbs.
Spring Mounts Damped Type To 200 lbs. CO MP O NE NTS MATERIAL: Base Plate Mild Steel Spring igh-tensile Steel - Phosphated & Dyed Black End Cap Cast Light Alloy STAINLESS STEEL MES FOR LOADS OF 60 TO 200
CONTENTS. 5 BALANCING OF MACHINERY Scope Introduction Balancing Machines Balancing Procedures
CONTENTS 1 OVERVIEW.....................................................................1-1 1.1 Introduction.................................................................1-1 1.2 Organization.................................................................1-1
PROPULSION EQUIPMENT DOCUMENTATION SHEET. Propulsion Equipment
PROPULSION EQUIPMENT General Vessels like rescue boats, patrol boats and anchor handling boats have to show 100 percent performance, even in the most extreme conditions. These so called s pecial seagoing
RING & BUSHING MOUNTS
RING & BUSHING MOUNTS Ring and bushing isolators are versatile, low cost mounts that can satisfy many vibration control problems. They are rugged, low-cost isolators easily installed. Ring and bushing
INTRODUCTION. In discussing vibration protection, it is useful to identify the three basic elements of dynamic systems:
INTRODUCTION Mechanical vibration and shock are present in varying degrees in virtually all locations where equipment and people function. The adverse effect of these disturbances can range from negligible
ISSN: SIMULATION AND ANALYSIS OF PASSIVE SUSPENSION SYSTEM FOR DIFFERENT ROAD PROFILES WITH VARIABLE DAMPING AND STIFFNESS PARAMETERS S.
Journal of Chemical and Pharmaceutical Sciences www.jchps.com ISSN: 974-2115 SIMULATION AND ANALYSIS OF PASSIVE SUSPENSION SYSTEM FOR DIFFERENT ROAD PROFILES WITH VARIABLE DAMPING AND STIFFNESS PARAMETERS
ANALYSIS OF GEAR QUALITY CRITERIA AND PERFORMANCE OF CURVED FACE WIDTH SPUR GEARS
8 FASCICLE VIII, 8 (XIV), ISSN 11-459 Paper presented at Bucharest, Romania ANALYSIS OF GEAR QUALITY CRITERIA AND PERFORMANCE OF CURVED FACE WIDTH SPUR GEARS Laurentia ANDREI 1), Gabriel ANDREI 1) T, Douglas
ROTATING MACHINERY DYNAMICS
Pepperdam Industrial Park Phone 800-343-0803 7261 Investment Drive Fax 843-552-4790 N. Charleston, SC 29418 www.wheeler-ind.com ROTATING MACHINERY DYNAMICS SOFTWARE MODULE LIST Fluid Film Bearings Featuring
No shake, rattle, or roll.
No shake, rattle, or roll. Isolator Natural Frequency High Input Specifications Vertical 1.2 Hz Horizontal 1.0 Hz Low Input Specifications Vertical 1.5-2.0 Hz Horizontal 1.2-1.7 Hz Isolation Efficiency
MECHANICAL EQUIPMENT. Engineering. Theory & Practice. Vibration & Rubber Engineering Solutions
MECHANICAL EQUIPMENT Engineering Theory & Practice Vibration & Rubber Engineering Solutions The characteristic of an anti-vibration mounting that mainly determines its efficiency as a device for storing
DC MILL DUTY CONTACTORS
DC MILL DUTY CONTCTORS DC Mill Duty Contactors 900 Range (Rating 15, 25, 50, 150, 300 & 600) BCH DC type 900 Mill Duty Contactors have been designed keeping in view the arduous environment and duty conditions
Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
Technology on Your Wavelength
Standard forms of delivery, ex Lebanon, PA Sheets Thickness: Length: Width: 25 mm and 12.5 mm Custom thicknesses available on request 59" (1,500 mm) 3.3' (1,000 mm) Max. static load 124.0 Peak loads (rare,
Table of Contents. Technical Section Elastomer Information Engineering Analysis... 11
Table of Contents A Technical Section... 2-9 Elastomer Information... 1 Engineering Analysis... 11 Fail-Safe Compression Mounts... 123 Compression Mounts... 148 Dome Mounts... 19 Cupmounts... 214 Stable-Flex
Vibration and Shock Isolation Products
2215 Lyons Road Miamisburg, Ohio 45342-4465 Phone: 937-438-11 Fax: 937-438-219 Email: tpc@novibes.com Website: www.novibes.com Order online at NoVibes.com Tech Products Corporation - Vibration and Shock
AGR Series Gear-Driven Rotary Stages
AGR Series Gear-Driven Rotary Stages Enhanced speed and load capacity Large aperture addresses a wide range of applications Continuous 360 degrees rotary positioning Rotary Stages AGR Series Direct encoder
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULTOR ND FILTER/REGULTOR Stainless Steel L Compact /, High Flow / - / FETURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment and suitable for use in
Vibration Control Technology Industry. Catalogue 2012
Vibration Control Technology Industry Catalogue 212 The information in this product catalogue is based on the experience gained in decades of research on the development and manufacture of components for
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
APPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE
Colloquium DYNAMICS OF MACHINES 2012 Prague, February 7 8, 2011 CzechNC APPLICATION OF A NEW TYPE OF AERODYNAMIC TILTING PAD JOURNAL BEARING IN POWER GYROSCOPE Jiří Šimek Abstract: New type of aerodynamic
Miniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
APS 400 ELECTRO-SEIS. Long Stroke Shaker Page 1 of 5. Applications. Features
Long Stroke Shaker Page 1 of 5 The APS 400 ELECTRO-SEIS is a force generator specifically designed to be used alone or in arrays for studying dynamic response characteristics of various structures. It
BACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the
Active vibration reduction applied to the compressor of an air-conditioning unit for trams
Active vibration reduction applied to the compressor of an air-conditioning unit for trams J. Bös, E. Janssen, M. Kauba and D. Mayer Fraunhofer Institute for Structural Durability and System Reliability
FAILURE ANALYSIS & REDESIGN OF A BRAKE CALLIPER SUPPORT. Prof. A. Bracciali, Dr. F. Piccioli, T. De Cicco
FAILURE ANALYSIS & REDESIGN OF A BRAKE CALLIPER SUPPORT Prof. A. Bracciali, Dr. F. Piccioli, T. De Cicco Dipartimento di Meccanica e Tecnologie Industriali Università di Firenze, via Santa Marta 3, 50139
Design and Application of Vibration Suppression
Design and Application of Vibration Suppression Excessive vibration can be detrimental to the structural integrity of structures or can adversely affect the performance of instruments such as telescopes
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
APS 420 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The APS 420 ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying
SHOCK ABSORBERS SHOCK ABSORBERS.
SHOCK ABSORBERS SHOCK ABSORBERS Visit : E-mail : www.theallpowersource.com lp we com info@theallpowersource.com I ABOUT US The Allpower Source (TAS) is a division of Technology Dynamics Inc. (TDI) in Bergenfield
Bin Activators. Bin Activators. Bin Unloaders PLBB (LVT) Posibin MLB Live Bin Self Standing Static Bin/Hopper
in ctivators Standard in ctivator Sanitary in ctivator Pre-Steamer in ctivator LVT in ctivator in ctivators Posibins & ins Portable (IC) P Posibin in Unloaders PL (LVT) Posibin ML Live in Self Standing
VIBRATION ANALYSIS OPERATIONAL DEFLECTION SHAPES & MODE SHAPES VERIFICATION OF ANALYTICAL MODELLING MATTIA PIRON GIOVANNI BORTOLAN LINO CORTESE
VIBRATION ANALYSIS OPERATIONAL DEFLECTION SHAPES & MODE SHAPES VERIFICATION OF ANALYTICAL MODELLING MATTIA PIRON GIOVANNI BORTOLAN LINO CORTESE 27 June, 2018 ABSTRACT 2 In the process of designing an alternator
Miniature electropilots U2
Direct intervention electropilots with poppet valve system and bottom cushioned ssembly on subbase Threaded connections on the body CNOMO interface Orientable coil (360 ) separated from mechanical part
DOUBLETRACK 990XT PARTS INCLUDED G F I Q T Y Z. part description part number qty. 1 O. 4 lever / levier / palanca 4 Q 4 R 4 T.
DOUBLETRACK 990XT PARTS INCLUDED C B K N A U V W X L M D R E J O P H S G F I Q T Y Z prt description prt numer qty. A B C D E F G H I J K L stinger & ckone ssemly ike tue & wheel holder ssemly upright
Saving you Time, Saving you Money, Putting you First! CENTER HUNG TRAY. Width Length in Inches
INTRODUCTION For an integrated wire management system, Center Hung Tray simplifies the support and routing of power and telecom/teledata cabling. single hanger rod is used at each support point. This makes
Engine Mounts and its Design Considerations
Engine Mounts and its Design Considerations Atul Adhau Prof V Kumar, PG Scholar, Dept of Mechanical Engineering, Prof Mech Engg AISSMSCOE Pune AISSMSCOE, Pune University... Pune University Abstract The
New products. The plastic silencer AGP The new standard
The plastic silencer AGP The new standard New products Versatile plastic silencer for boilers and block heating plants at a handsome price. Up to 120 C / 248 F flue gas temperature Very good silencing
Bushing connector application in Suspension modeling
Bushing connector application in Suspension modeling Mukund Rao, Senior Engineer John Deere Turf and Utility Platform, Cary, North Carolina-USA Abstract: The Suspension Assembly modeling in utility vehicles
DUAL-BLEED TECH SHEET PS-6020-DB
DUAL-BLEED TECH SHEET PS-6020-DB Main Office 150 Franklin St. Reading, PA 19602 (610) 375-6180 (610) 375-6190 Fax Table of Contents: Introduction p.3 Terminology p.4 Benefits p.5 Adjusters p.5 Rebound
CLASSIFICATION OF ROLLING-ELEMENT BEARINGS
CLASSIFICATION OF ROLLING-ELEMENT BEARINGS Ball bearings can operate at higher speed in comparison to roller bearings because they have lower friction. In particular, the balls have less viscous resistance
GLOSSARY. Air Actuator
GLOSSARY A Air Actuator A device which induces action or motion with compressed air being the medium through which the power is transmitted, similar in function to a hydraulic cylinder. Air Spring Assembly
Alan R. Klembczyk, Chief Engineer Taylor Devices, Inc. North Tonawanda, NY
SIMULATION, DEVELOPMENT, AND FIELD MEASUREMENT VALIDATION OF AN ISOLATION SYSTEM FOR A NEW ELECTRONICS CABINET IN THE SPACE SHUTTLE LAUNCH ENVIRONMENT WITHIN THE MOBILE LAUNCH PLATFORM Alan R. Klembczyk,
Passive Vibration Reduction with Silicone Springs and Dynamic Absorber
Available online at www.sciencedirect.com Physics Procedia 19 (2011 ) 431 435 International Conference on Optics in Precision Engineering and Nanotechnology 2011 Passive Vibration Reduction with Silicone
MAIN SHAFT SUPPORT FOR WIND TURBINE WITH A FIXED AND FLOATING BEARING CONFIGURATION
Technical Paper MAIN SHAFT SUPPORT FOR WIND TURBINE WITH A FIXED AND FLOATING BEARING CONFIGURATION Tapered Double Inner Row Bearing Vs. Spherical Roller Bearing On The Fixed Position Laurentiu Ionescu,
Short-stroke cylinder, Series KHZ Ports: M5 - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal thread
: - G 1/4 Single-acting, retracted without pressure Cushioning: elastic Piston rod: Internal 1 Compressed air connection Internal Ambient temperature min./max. -25 C / +80 C Medium temperature min./max.
PowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
Special edition paper
Efforts for Greater Ride Comfort Koji Asano* Yasushi Kajitani* Aiming to improve of ride comfort, we have worked to overcome issues increasing Shinkansen speed including control of vertical and lateral
Introduction Vibration Control
Vibration Control Topics: Introduction to Vibration Control Methods of Vibration Control Vibration Isolation Rigidly Coupled Viscous Damper Elastically Coupled Viscous Damper Undamped Vibration Absorber
PRECISION BELLOWS COUPLINGS
PRECISION BELLOWS COUPLINGS Bellows couplings are used where precise rotation, high speeds, and dynamic motion must be transmitted. They exhibit zero backlash and a high level of torsional stiffness, offering
Backlash-free safety couplings. Backlash-free safety couplings. Product information. Optimal safety has a name: Guaranteed by two systems:
;;Engaged ;;Engaged Backlash-free safety couplings Product information Optimal safety has a name: Backlash-free safety couplings Guaranteed by two systems: ;;;; Locking Locking element - cylinder roller
Stopping Accuracy of Brushless
Stopping Accuracy of Brushless Features of the High Rigidity Type DGII Series Hollow Rotary Actuator The DGII Series hollow rotary actuator was developed for positioning applications such as rotating a
Assembly Products. View Assembly Products at: LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION
Assembly Products LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION View Assembly Products at: www.clrh.com (636) 386-8022 www.clrh.com Drive, Assembly and Handling Technology Linear Actuators n
Glide Screw. Combines the Features of a Linear Bearing and Screw in One Compact Package
Glide Combines the Features of a Linear Bearing and in One Compact Package Introduction What is a Glide? Part linear bearing, part lead screw; a combination of two favorites to create something better
1291BL Series Technical Specification Single Axis Position and Rate Table System
Datasheet 1291BL Series Technical Specification Single Axis Position and Rate Table System DESCRIPTION The Model 1291BL Single Axis Position and Rate Table System is designed to provide precise position,
Catalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
DESIGN OPTIMIZATION FOR VIBRATION LEVEL OF ROOT BLOWER WITH LOAD CONDITION
DESIGN OPTIMIZATION FOR VIBRATION LEVEL OF ROOT BLOWER WITH LOAD CONDITION Gomatesh V. Malikwade 1, Swapnil S. Patil 2, Aditya A. Magdum 3, Avadhoot V. Khandare 4, Prof.Dr.S.H.Sawant 5 1,2,3,4 UG Student,
Small dampers refine end product
4 Motion Control Small dampers refine end product ACE rotary dampers mainly provide an invisible yet valuable service as a maintenance-free machine element to allow controlled deceleration of rotary or
APS 113 ELECTRO-SEIS Long Stroke Shaker with Linear Ball Bearings Page 1 of 5
Long Stroke Shaker with Linear Ball Bearings Page 1 of 5 The ELECTRO-SEIS shaker is a long stroke, electrodynamic force generator specifically designed to be used alone or in arrays for studying dynamic
White Paper. Stator Coupling Model Analysis By Johan Ihsan Mahmood Motion Control Products Division, Avago Technologies. Abstract. 1.
Stator Coupling Model Analysis By Johan Ihsan Mahmood Motion Control Products Division, Avago Technologies White Paper Abstract In this study, finite element analysis was used to optimize the design of
ME scope Application Note 29 FEA Model Updating of an Aluminum Plate
ME scope Application Note 29 FEA Model Updating of an Aluminum Plate NOTE: You must have a package with the VES-4500 Multi-Reference Modal Analysis and VES-8000 FEA Model Updating options enabled to reproduce
Fixed Displacement Radial Piston Hydraulic Motor Staffa, Series B
Size 50 to 11,600 cc/rev, up to 250 bar, 36,000Nm, 240kW Fixed Displacement Radial Piston Hydraulic Motor, Series B GB Features Rugged, reliable, proven design. Unique Hydrostatic balancing provides minimum
PREMIUM HITCH MOUNT PLATFORM BIKE CARRIER
model no. 040-96-2 PREMIUM HITCH MOUNT PLTFORM BIKE CRRIER NOTE: Read instructions carefully before installation. Refer to assembly instructions and ensure the bike carrier is installed correctly. Keep
2,1 2, , ,1 2, W (DC) - 10 VA (AC) AM-5111 U2 DB 12 V DC - 24 V DC - 24 V AC V AC V AC IP65
B Miniature Electropilots CHRCTERISTICS mbient temperature Fluid Coutation system Connections Nominal bore () Nominal flow rate (Nl/min) Power consumption Connector Sleeve Coil Voltage Protection degree
High precision and super light. Angular contact roller bearings from INA
High precision and super light Angular contact roller bearings from INA Angular contact roller bearings High precision and super light The limits of conventional ball reaching their performance limits
Vibration Analysis of an All-Terrain Vehicle
Vibration Analysis of an All-Terrain Vehicle Neeraj Patel, Tarun Gupta B.Tech, Department of Mechanical Engineering, Maulana Azad National Institute of Technology, Bhopal, India. Abstract - Good NVH is
Short-stroke cylinder, Series SSI Ports: M5 - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread
Ports: - G 3/8 double-acting with magnetic piston Cushioning: elastic Piston rod: Internal thread 1 Standards ISO 15524 Compressed air connection Internal thread Ambient temperature min./max. - C / +80
XX 1.2 GI 12 VX DENSE WIDE ANGLE ARRAYS DWA 1.2 GI 12 V1 DWA 1.2 GI 12 V2 LONG RANGE ARRAYS LR 1.2 GI 12 V1 LR 1.2 GI 12 V2 LR 1.
XX 1.2 GI 12 VX The lens arrays of Fresnel Technologies XX 1.2 GI 12 VX series are intended to be used in passive infrared motion detector devices. They are optimized for dual-element pyroelectric detectors.
Results in rail research using SIMPACK
Results in rail research using SIMPACK Politecnico di Torino - Dip. di Meccanica IIa Facoltà di Ingegneria (Vercelli) N. Bosso, A. Gugliotta, A. Somà The railway dynamic research group of the Mechanical