Technical Specifications

Transcription

1 Hydraulic Excavator Technical Specifications Enge Track Enge Model Cat C7.1 ACERT Standard Track Shoe Width Net Power (ISO 9249) 117 kw 157 hp Number of Shoes (each side) 49 Net Power (SAE J1349) 117 kw 157 hp Number of Track Rollers (each side) 8 Gross Power (ISO 14396/SAE J1995) 118 kw 158 hp Number of Carrier Rollers (each side) 2 Bore Stroke Drive Displacement 7.01 L Maximum Gradeability 35 /70% The meets Cha Nonroad Stage III emission standards. Maximum Travel Speed 5.7 km/h 3.5 mph Recoended for use up to 4500 m (14,764 ft) altitude with Maximum Drawbar Pull enge power derate above 3000 m (9,842.5 ft). 205 kn 45,996 f Net power advertised is the power available at the flywheel when Hydraulic System the enge is equipped with fan, air cleaner, muffler and alternator. Ratg at 1,800 rpm. Ma System Maximum Flow 429 L/m 113 gal/m Enge rpm (Implement) (215 (57 2 pumps) 2 pumps) Swg System Maximum Flow No swg pump Operation 1,650 rpm Maximum Pressure Equipment kpa 5,075 psi Travel 1,800 rpm Normal Swg Mechanism Maximum Pressure Equipment kpa 5,510 psi Lift Mode Swg Speed rpm Maximum Pressure Travel kpa 4,974 psi Maximum Swg Torque 74 kn m 54,440 f-ft Maximum Pressure Swg kpa 3,886 psi Weights Boom Cylder Bore Boom Cylder Stroke Operatg Weight ,500 Stick Cylder Bore HD Reach boom, HD R2.9 (9'6") stick, HD 1.0 m3 (1.1 yd3) Stick Cylder Stroke bucket and 600 (24") triple grouser shoes, 4.2 mt (9,300 ) Bucket Cylder Bore counterweight. Bucket Cylder Stroke

2 Service Refill Capacities Fuel Tank Capacity 345 L 86.6 gal Coolg System 25 L 6.6 gal Enge Oil 25 L 6.6 gal Swg Drive (each) 5 L 1.3 gal Fal Drive (each) 5 L 1.3 gal Hydraulic System (cludg tank) 234 L 61.8 gal Hydraulic Tank 115 L 30.4 gal Standards Brakes ISO 10265:2008 Cab/FOGS ISO 10262:1998 Cab/ROPS ISO :2008 Sound Performance ISO 6395:2008 (external) ISO 6396:2008 (side cab) 100 db(a) 70 db(a) Hearg protection may be needed when operatg with an open operator station and cab (when not properly mataed or doors/ wdows open) for extended periods or a noisy environment. Operatg Weight and Ground Pressure 600 (24") Triple Grouser Shoes Weight Ground Pressure 4.2 mt (9,300 ) Counterweight + Base Mache HD Reach Boom + HD R2.9 (9'6") Stick m 3 (1.49 yd 3 ) GD Bucket , kpa 6.7 psi All operatg weights clude a 90% fuel tank with 75 (165 ) operator. 2

3 Major Component Weights Base Mache (with 4.2 mt [9,300 ] counterweight, semi-hd swg frame, standard base frame with ,800 HD track rollers and standard carrier rollers for long undercarriage, with boom cylder does not clude 90% fuel and 75 [165 ] operator) Track Shoes: 600 (24") Width, 10 (0.39") Thick Triple Grouser Track Shoes , (24") Width, 13 (0.51") Thick Double Grouser Track Shoes ,800 Two Boom Cylders Weight of 90% Fuel Tank and 75 (165 ) Operator Counterweights: 3.7 mt (8,200 ) Counterweight , mt (9,300 ) Counterweight , mt (10,400 ) Counterweight ,400 Swg Frame: Standard Swg Frame, for C7.1 ACERT ,170 Semi-HD Swg Frame, for C7.1 ACERT ,210 Standard and Long Undercarriage: Standard Base Frame with HD Track Rollers and Standard Carrier Rollers for Long Undercarriage ,700 HD Base Frame with SD Track Rollers and Standard Carrier Rollers for Long Undercarriage ,300 Booms (cludg les, ps, stick cylder): HD Reach Boom (5.7 m/18'8") ,400 Super Long Reach Boom (8.85 m/29'0") ,800 Sticks (cludg les, ps, bucket cylder, bucket lkage): HD Reach Stick (R2.9B1/9'6") ,600 HD Reach Stick (R2.5B1/8'2") ,500 Super Long Reach Stick (6.28A/20'7") ,000 Buckets (without lkage): 1.0 m3 (1.31 yd3) HD 880 1, m3 (1.31 yd3) SD 930 2, m3 (1.14 yd3) GD 820 1, m3 (1.56 yd3) HD 880 1, m3 (0.69 yd3) GD

4 Dimensions All dimensions are approximate and may vary dependg on bucket selection , 10 2 Boom Options HD Reach Boom SLR Boom 5.7 m (18'8") 8.85 m (29'0") Stick Options HD Reach Sticks SLR Stick R2.9B1 (9'6") R2.5B1 (8'2") 6.28A (20'7") 1 Mache Height: Top of Cab Height '9" '9" '9" Top of FOGS Height '2" '2" '2" Handrails Height '8" '8" '8" With Boom/Stick/Bucket Installed '4" '4" '6" With Boom/Stick Installed '7" '7" '1" With Boom Installed '2" '2" '8" 2 Mache Length: With Boom/Stick/Bucket Installed '3" '3" '10" With Boom/Stick Installed '2" '2" '10" With Boom Installed '9" '9" '3" 3 Upperframe Width without Walkways '1" '1" '1" 4 Tail Swg Radius '3" '3" '3" 5 Counterweight Clearance '5" '5" '5" 6 Ground Clearance 470 1'7" 470 1'7" 470 1'7" 7 Track Length Length to Center of Rollers '0" '0" '0" 8 Track Gauge Extended '9" '9" '9" 9 Track Width: 600 (24") Shoes '9" '9" '9" 10 Undercarriage Width (with steps/without steps): 600 (24") Shoes '9" '9" '9" Bucket Type HD HD GD Bucket Capacity 1.19 m yd m yd m yd3 Bucket Tip Radius '2" '2" '0" 4

5 Workg Ranges All dimensions are approximate and may vary dependg on bucket selection. Feet Meters R2.9B1 (9'6") 2 R2.5B1 (8'2") Meters Feet Boom Option HD Reach Boom 5.7 m (18'8") Stick Option HD Reach Sticks R2.9B1 (9'6") R2.5B1 (8'2") 1 Maximum Diggg Depth '1" '8" 2 Maximum Reach at Ground Le '4" '1" 3 Maximum Cuttg Height '9" '1" 4 Maximum Loadg Height '4" '8" 5 Mimum Loadg Height '1" '6" 6 Maximum Depth Cut for 2440 (8'0") Level Bottom '6" '1" 7 Maximum Vertical Wall Diggg Depth '0" '9" Bucket Diggg Force (SAE) 134 kn 30,104 f 134 kn 30,104 f Bucket Diggg Force (ISO) 150 kn 33,811 f 150 kn 33,811 f Stick Diggg Force (SAE) 103 kn 23,212 f 114 kn 25,619 f Stick Diggg Force (ISO) 106 kn 23,911 f 118 kn 26,491 f Bucket Type HD HD Bucket Capacity 1.19 m yd m yd3 Bucket Tip Radius '2" '2" 5

6 Workg Ranges All dimensions are approximate and may vary dependg on bucket selection. Feet 45 Meters A (20'7") Meters Feet Boom Option SLR Boom 8.85 m (29'0") Stick Option SLR Stick 6.28A (20'7") 1 Maximum Diggg Depth '4" 2 Maximum Reach at Ground Le '7" 3 Maximum Cuttg Height '8" 4 Maximum Loadg Height '0" 5 Mimum Loadg Height '10" 6 Maximum Depth Cut for 2440 (8'0") Level Bottom '0" 7 Maximum Vertical Wall Diggg Depth '8" Bucket Diggg Force (SAE) 54 kn 12,119 f Bucket Diggg Force (ISO) 60 kn 13,549 f Stick Diggg Force (SAE) 48 kn 10,791 f Stick Diggg Force (ISO) 49 kn 10,935 f Bucket Type GD Bucket Capacity 0.53 m yd3 Bucket Tip Radius '0" 6

7 Reach Boom Lift Capacities Counterweight: 3.7 mt (8,200 ) without Bucket Heavy Lift: Off 2.9 m (9'6") 5.7 m (18'8") 600 (24") Triple Grouser Shoes 3650 (12'0") R2.9B (7'9") 4450 (14'7") 1500 / / / / / *6600 *14,750 * *25,500 *6600 *14,750 * *25,500 *6200 *14,200 * *24,300 * *29,600 * *23,200 *6200 *14,200 * *24, ,950 * *23,200 *7750 *16,650 *9350 *20,150 * *22,100 * *22,350 *9650 *20,850 *7800 *16, , , , , , ,950 *4500 *4800 *10,550 *5300 *11,500 *6050 *13,150 *6850 *14, , , ,750 *4500 *4800 *10, , , , , , ,950 *4950 *10, , , , , , , , , ,550 *3850 *8,600 *3600 *7,900 *3500 *7,700 *3600 *7,900 *3800 *8,350 *4200 *9, , ,350 *5900 *12,900 *3850 *8,600 *3600 *7, , , , , , , , Reach Boom Lift Capacities Counterweight: 3.7 mt (8,200 ) without Bucket Heavy Lift: On 2.9 m (9'6") 5.7 m (18'8") 600 (24") Triple Grouser Shoes 3650 (12'0") R2.9B (7'9") 4450 (14'7") 1500 / / / / / *7000 *15,650 * *27,000 *7000 *15,650 * *27,000 *6550 *15,050 * *25,750 * *32,750 * *25,750 *6550 *15,050 * , ,950 * *25,750 *8550 *18,400 * *22, , ,200 * *23,050 *8650 *18, , , , , , ,950 *4900 *5300 *11,650 *5850 *12,700 *6700 *14, , , , ,750 * , , , , , , , , , , , , , , , , ,550 *4250 *4250 *9,400 *9,400 * *8,650 8,100 * *8,450 6,750 * *8,650 6,100 * *9,150 5, ,550 5, ,350 6, ,350 7,600 * *14,350 10, ISO * Indicates that the load is limited by hydraulic liftg capacity rather than tippg load. The above loads are compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liftg capacity or 75% of tippg load. Weight of all liftg accessories must be deducted from the above liftg capacities. Liftg capacities are based on the mache standg on a firm, uniform supportg surface. The use of a work tool attachment pot to handle/lift objects, could affect the mache lift performance. Lift capacity stays with ±5% for all available track shoes. Always refer to the appropriate Operation and Matenance Manual for specific product formation. 7

8 Reach Boom Lift Capacities Counterweight: 3.7 mt (8,200 ) without Bucket Heavy Lift: Off 2.5 m (8'2") 5.7 m (18'8") 600 (24") Triple Grouser Shoes 3650 (12'0") R2.5B (7'9") 4450 (14'7") 3000 / / / / * * *25,650 *25,650 * *27,700 26,250 *6550 *14,150 *8250 *17,750 *9700 *20,950 * *22,400 * *22,100 *9250 *20,000 *6850 *14,400 *6550 *14, , , , , , ,250 *5200 *11,450 *5600 *12,200 *6350 *13, , , ,700 *6850 *14, , , , , , , ,050 * , , , , , ,600 *4700 *4700 *10,400 *10,400 * *9,450 8,900 * *9,250 7,300 * *9,450 6, ,000 6, ,250 6, ,300 6,950 * *13,450 8,500 * *13,000 13, Reach Boom Lift Capacities Counterweight: 3.7 mt (8,200 ) without Bucket Heavy Lift: On 2.5 m (8'2") 5.7 m (18'8") 600 (24") Triple Grouser Shoes 3650 (12'0") R2.5B (7'9") 4450 (14'7") 3000 / / / / * * *27,150 25,750 * *30,650 26,250 *7250 *15,600 *9100 *19,600 * *23, , ,250 * *22,200 *7650 *16,000 *7250 *15, , , , , , ,250 *5750 *12,600 *6200 *13,500 *7000 *15, , , , , , , , , , , ,050 * , , , , , ,600 *5100 *5100 *11,350 *11,350 * *10,350 8,900 * *10,100 7,300 * *10,350 6, ,000 6, ,250 6, ,300 6, ,850 8,500 * *14,500 13, ISO * Indicates that the load is limited by hydraulic liftg capacity rather than tippg load. The above loads are compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liftg capacity or 75% of tippg load. Weight of all liftg accessories must be deducted from the above liftg capacities. Liftg capacities are based on the mache standg on a firm, uniform supportg surface. The use of a work tool attachment pot to handle/lift objects, could affect the mache lift performance. Lift capacity stays with ±5% for all available track shoes. Always refer to the appropriate Operation and Matenance Manual for specific product formation. 8

9 Reach Boom Lift Capacities Counterweight: 4.2 mt (9,300 ) without Bucket Heavy Lift: Off 2.9 m (9'6") 5.7 m (18'8") 600 (24") Triple Grouser Shoes 3650 (12'0") R2.9B (7'9") 4450 (14'7") 1500 / / / / / *6600 *14,750 * *25,500 *6600 *14,750 * *25,500 *6200 *14,200 * *24,300 * *29,600 * *23,200 *6200 *14,200 * *24, ,700 * *23,200 *7750 *16,650 *9350 *20,150 * *22,100 * *22,350 *9650 *20,850 *7800 *16, , , , , , ,850 *4500 *4800 *10,550 *5300 *11,500 *6050 *13,150 *6850 *14, , ,500 *7150 *15,350 *4500 *4800 *10, , , , , , ,550 *4950 *10,850 *5250 *11, , , , , , , , ,050 *3850 *8,600 *3600 *7,900 *3500 *7,700 *3600 *7,900 *3800 *8,350 *4200 *9,300 *4950 *10,950 *5850 *12,850 *5900 *12,900 *3850 *8,600 *3600 *7, , , , , , , , Reach Boom Lift Capacities Counterweight: 4.2 mt (9,300 ) without Bucket Heavy Lift: On 2.9 m (9'6") 5.7 m (18'8") 600 (24") Triple Grouser Shoes 3650 (12'0") R2.9B (7'9") 4450 (14'7") 1500 / / / / / *7000 *15,650 * *27,000 *7000 *15,650 * *27,000 *6550 *15,050 * *25,750 * *32,750 * *25,750 *6550 *15,050 * *25, ,700 * *25,750 *8550 *18,400 * *22,250 * *24,450 * ,500 * *23,050 *8650 *18, , , , , , ,850 *4900 *5300 *11,650 *5850 *12,700 *6700 *14, , , , ,600 *4900 * , , , , , , ,550 *5500 *12, , , , , , , , , ,050 *4250 *4250 *9,400 *9,400 * *8,650 8,600 * *8,450 7,250 * *8,650 6,550 * *9,150 6, ,100 6, ,950 6, ,050 8,150 * *14,350 11, ISO * Indicates that the load is limited by hydraulic liftg capacity rather than tippg load. The above loads are compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liftg capacity or 75% of tippg load. Weight of all liftg accessories must be deducted from the above liftg capacities. Liftg capacities are based on the mache standg on a firm, uniform supportg surface. The use of a work tool attachment pot to handle/lift objects, could affect the mache lift performance. Lift capacity stays with ±5% for all available track shoes. Always refer to the appropriate Operation and Matenance Manual for specific product formation. 9

10 Reach Boom Lift Capacities Counterweight: 4.2 mt (9,300 ) without Bucket Heavy Lift: Off 2.5 m (8'2") 5.7 m (18'8") 600 (24") Triple Grouser Shoes 3650 (12'0") R2.5B (7'9") 4450 (14'7") 3000 / / / / * * *25,650 *25,650 * * *27,700 *27,700 *6550 *14,150 *8250 *17,750 *9700 *20,950 * *22,400 * *22,100 *9250 *20,000 *6850 *14,400 *6550 *14, , , , , ,450 *6850 *14,400 *5200 *11,450 *5600 *12,200 *6350 *13,750 *7100 *15, , ,550 *6850 *14,600 * , , , , , , ,700 * , , , , , ,100 *4700 *4700 *10,400 *10,400 * *9,450 *9,450 * *9,250 7,800 * *9,450 7,000 * *10,100 6, ,850 6, ,950 7,450 * *13,450 9,100 *5950 *5950 *13,000 *13, Reach Boom Lift Capacities Counterweight: 4.2 mt (9,300 ) without Bucket Heavy Lift: On 2.5 m (8'2") 5.7 m (18'8") 600 (24") Triple Grouser Shoes 3650 (12'0") R2.5B (7'9") 4450 (14'7") 3000 / / / / * * *27,150 *27,150 * *30,650 28,000 *7250 *15,600 *9100 *19,600 * *23,150 * ,650 * *24,450 * *22,200 *7650 *16,000 *7250 *15, , , , , , ,150 *5750 *12,600 *6200 *13,500 *7000 *15, , , , , , , , , , , ,700 * , , , , , ,100 *5100 *5100 *11,350 *11,350 * *10,350 9,500 * *10,100 7,800 * *10,350 7, ,600 6, ,850 6, ,950 7, ,600 9,100 * *14,500 13, ISO * Indicates that the load is limited by hydraulic liftg capacity rather than tippg load. The above loads are compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liftg capacity or 75% of tippg load. Weight of all liftg accessories must be deducted from the above liftg capacities. Liftg capacities are based on the mache standg on a firm, uniform supportg surface. The use of a work tool attachment pot to handle/lift objects, could affect the mache lift performance. Lift capacity stays with ±5% for all available track shoes. Always refer to the appropriate Operation and Matenance Manual for specific product formation. 10

11 SLR Boom Lift Capacities Counterweight: 4.7 mt (10,400 ) without Bucket Heavy Lift: Off 6.28 m (20'7") 8.85 m (29'0") 600 (24") Triple Grouser Shoes 3650 (12'0") Super Long Reach 2380 (7'9") 4450 (14'7") 1500 / / / / / *1250 *1250 *2,800 *2,800 *1200 *1200 *2,600 *2,600 *1150 *1150 *2,450 *2,450 *1100 *1100 *2,400 *2,400 *1100 *1100 *2,400 *2,400 *1100 *1100 *2,400 *2,400 *4700 *4700 *6050 *6050 *4450 *4450 * *1150 *1150 *11,850 *11,850 *12,950 *12,950 *9,600 *9,600 *7,850 7,800 *2,500 *2,500 * * * * *16,000 13,850 *11,350 9,550 *8,900 7,050 *2,600 2,400 *2000 *2000 *4650 *4650 * * * *4,550 *4,550 *10,700 *10,700 *12,750 8,600 *9,850 6,450 *2,750 2,350 *2100 *2100 *2700 *2700 *4650 *4650 * * *4,600 *4,600 *6,100 *6,100 *10,500 *10,500 *13,650 8,000 10,250 6,000 *3,000 2,400 *2850 *2850 *3550 *3550 *5200 * * *6,350 *6,350 *7,900 *7,900 *11,750 11,500 13,650 7,700 9,950 5,750 *3,300 2,500 *3650 *3650 *4400 *4400 * * *8,150 *8,150 *9,900 *9,900 *13,700 11,600 13,600 7,650 9,800 5,600 *3,750 2,700 *4550 *4550 *5400 *5400 * * * *10,150 *10,150 *12,150 *12,150 *16,350 11,850 *13,350 7,700 9,850 5,650 *4,450 3,000 *5500 *5500 *6600 *6600 * * * * *12,250 *12,250 *14,800 *14,800 *15,750 12,250 *12,250 7,950 *9,850 5,800 *5,650 3,550 *7950 *7950 * * * * *17,650 *17,650 *13,200 12,900 *10,400 8,400 *8,350 6,150 *5,950 4, ISO * Indicates that the load is limited by hydraulic liftg capacity rather than tippg load. The above loads are compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liftg capacity or 75% of tippg load. Weight of all liftg accessories must be deducted from the above liftg capacities. Liftg capacities are based on the mache standg on a firm, uniform supportg surface. The use of a work tool attachment pot to handle/lift objects, could affect the mache lift performance. Lift capacity stays with ±5% for all available track shoes. Always refer to the appropriate Operation and Matenance Manual for specific product formation. (contued on next page) 11

12 SLR Boom Lift Capacities Counterweight: 4.7 mt (10,400 ) without Bucket Heavy Lift: Off (contued) 6.28 m (20'7") 8.85 m (29'0") 600 (24") Triple Grouser Shoes 3650 (12'0") Super Long Reach 2380 (7'9") 4450 (14'7") 9000 / / / / *1250 *1250 *2,800 *2,800 *2200 *2200 *1200 *1200 *4,700 *4,700 *2,600 *2,600 *2200 *2200 * *1150 *1150 *4,800 *4,800 *3,650 *3,650 *2,450 *2,450 *2250 *2250 * *1100 *1100 *4,950 *4,950 *4,900 4,050 *2,400 *2,400 * * * *1100 *1100 *5,200 5,100 *5,000 3,950 *3,250 3,050 *2,400 *2,400 *2800 *2800 * * *1100 *1100 *6,100 *6,100 *5,600 4,850 *5,250 3,800 *4,600 2,950 *2,400 *2,400 * * * *1150 *1150 *6,750 5,900 *6,050 4,550 *5,550 3,600 4,750 2,850 *2,500 *2,500 * * * *7,450 5,400 *6,500 4,250 5,650 3,400 4,650 2,750 *2,600 2,400 * * *8,100 5,000 6,650 4,000 5,450 3,200 4,550 2,600 *2,750 2, * ,950 4,700 6,400 3,750 5,300 3,050 4,450 2,550 *3,000 2, * ,700 4,500 6,250 3,600 5,200 3,000 *3,650 2,500 *3,300 2, * ,600 4,400 6,200 3,550 5,150 2,950 *3,750 2, * ,650 4,400 6,200 3,600 *5,150 3,050 *4,450 3, * ,800 4,550 6,400 3,750 *5,650 3,550 * * *6,550 4,850 *5,950 4, ISO * Indicates that the load is limited by hydraulic liftg capacity rather than tippg load. The above loads are compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liftg capacity or 75% of tippg load. Weight of all liftg accessories must be deducted from the above liftg capacities. Liftg capacities are based on the mache standg on a firm, uniform supportg surface. The use of a work tool attachment pot to handle/lift objects, could affect the mache lift performance. Lift capacity stays with ±5% for all available track shoes. Always refer to the appropriate Operation and Matenance Manual for specific product formation. 12

13 SLR Boom Lift Capacities Counterweight: 4.7 mt (10,400 ) without Bucket Heavy Lift: On 6.28 m (20'7") 8.85 m (29'0") 600 (24") Triple Grouser Shoes 3650 (12'0") Super Long Reach 2380 (7'9") 4450 (14'7") 1500 / / / / / *1250 *1250 *2,800 *2,800 *1200 *1200 *2,600 *2,600 *1150 *1150 *2,450 *2,450 *1100 *1100 *2,400 *2,400 *1100 *1100 *2,400 *2,400 *1100 *1100 *2,400 *2,400 *4700 *4700 *6750 *6750 *5000 *5000 * *1150 *1150 *11,850 *11,850 *14,450 *14,450 *10,750 *10,750 *8,800 7,800 *2,500 *2,500 * * * * *16,000 13,850 *12,750 9,550 *10,050 7,050 *2,600 2,400 *2000 *2000 *4650 *4650 * * *4,550 *4,550 *10,700 *10,700 *14,350 8,600 10,700 6,450 *2,750 2,350 *2100 *2100 *2700 *2700 *4650 * * *4,600 *4,600 *6,100 *6,100 *10,500 *10,500 14,000 8,000 10,250 6,000 *3,000 2,400 *2850 *2850 *3550 *3550 *5200 * * *6,350 *6,350 *7,900 *7,900 *11,750 11,500 13,650 7,700 9,950 5,750 *3,300 2,500 *3650 *3650 *4400 *4400 * * *8,150 *8,150 *9,900 *9,900 *13,700 11,600 13,600 7,650 9,800 5,600 *3,750 2,700 *4550 *4550 *5400 *5400 * * *10,150 *10,150 *12,150 *12,150 *16,350 11,850 13,700 7,700 9,850 5,650 *4,450 3,000 *5500 *5500 *6600 *6600 * * * *12,250 *12,250 *14,800 *14,800 *17,800 12,250 *13,850 7,950 10,050 5,800 *5,650 3,550 *7950 *7950 * * * * *18,000 *18,000 *14,950 12,900 *11,800 8,400 *9,500 6,150 *6,800 4, ISO * Indicates that the load is limited by hydraulic liftg capacity rather than tippg load. The above loads are compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liftg capacity or 75% of tippg load. Weight of all liftg accessories must be deducted from the above liftg capacities. Liftg capacities are based on the mache standg on a firm, uniform supportg surface. The use of a work tool attachment pot to handle/lift objects, could affect the mache lift performance. Lift capacity stays with ±5% for all available track shoes. Always refer to the appropriate Operation and Matenance Manual for specific product formation. (contued on next page) 13

14 SLR Boom Lift Capacities Counterweight: 4.7 mt (10,400 ) without Bucket Heavy Lift: Off (contued) 6.28 m (20'7") 8.85 m (29'0") 600 (24") Triple Grouser Shoes 3650 (12'0") Super Long Reach 2380 (7'9") 4450 (14'7") 9000 / / / / *1250 *1250 *2,800 *2,800 *2350 *2350 *1200 *1200 *4,700 *4,700 *2,600 *2,600 *2450 *2450 * *1150 *1150 *5,450 5,400 *3,650 *3,650 *2,450 *2,450 * * *1100 *1100 *5,550 5,300 *5,400 4,050 *2,400 *2,400 * * * *1100 *1100 *5,900 5,100 *5,700 3,950 *3,250 3,050 *2,400 *2,400 * * * *1100 *1100 *6,850 6,350 *6,300 4,850 *5,950 3,800 *4,600 2,950 *2,400 *2,400 * * *1150 *1150 *7,600 5,900 *6,850 4,550 5,850 3,600 4,750 2,850 *2,500 *2,500 * * *8,400 5,400 6,950 4,250 5,650 3,400 4,650 2,750 *2,600 2, * ,300 5,000 6,650 4,000 5,450 3,200 4,550 2,600 *2,750 2, * ,950 4,700 6,400 3,750 5,300 3,050 4,450 2,550 *3,000 2, * ,700 4,500 6,250 3,600 5,200 3,000 *3,650 2,500 *3,300 2, * ,600 4,400 6,200 3,550 5,150 2,950 *3,750 2, * ,650 4,400 6,200 3,600 *5,150 3,050 *4,450 3, * ,800 4,550 6,400 3,750 *5,650 3,550 * * *7,500 4,850 *6,800 4, ISO * Indicates that the load is limited by hydraulic liftg capacity rather than tippg load. The above loads are compliance with hydraulic excavator lift capacity standard ISO 10567:2007. They do not exceed 87% of hydraulic liftg capacity or 75% of tippg load. Weight of all liftg accessories must be deducted from the above liftg capacities. Liftg capacities are based on the mache standg on a firm, uniform supportg surface. The use of a work tool attachment pot to handle/lift objects, could affect the mache lift performance. Lift capacity stays with ±5% for all available track shoes. Always refer to the appropriate Operation and Matenance Manual for specific product formation. 14

15 Bucket Specifications and Compatibility P-On (No Quick Coupler) Utility Duty (UD) (No Adjuster) General Duty Excavation (GD) Heavy Duty (HD) Severe Duty (SD) Extreme Duty (D) General Duty (GD) Ditch Cleang (DC) Long Reach With Cat P Grabber Coupler Utility Duty (UD) General Duty Excavation (GD) Heavy Duty (HD) Severe Duty (SD) Extreme Duty (D) Lkage Standard Undercarriage Counterweight 3.7 mt 4.2 mt 4.7 mt (8,200 ) (9,300 ) (10,400 ) Width Capacity Weight Fill HD Reach Boom SLR Boom m 3 yd 3 % HD R2.5 (8'2") HD R2.9 (9'6") HD R2.5 (8'2") HD R2.9 (9'6") 6.28A (20'7") B , B , B , B , B , B , B , B , B , B , B , B , Maximum load with p-on (payload + bucket) ,515 6,030 6,934 6,426 1,940 Long Undercarriage Counterweight 3.7 mt (8,200 ) 4.2 mt (9,300 ) 4.7 mt (10,400 ) Width Capacity Weight Fill HD Reach Boom SLR Boom Lkage m 3 yd 3 % HD R2.5 (8'2") HD R2.9 (9'6") HD R2.5 (8'2") HD R2.9 (9'6") 6.28A (20'7") B , B , B , B , B , B , B , B , B , B , B , B , Maximum load with coupler (payload + bucket) ,585 5,100 6,004 5,497 1,010 The above loads are compliance with hydraulic excavator standard EN474 5: A3:2013, Maximum Material Density: they do not exceed 87% of hydraulic liftg capacity or 75% of tippg capacity with front lkage 2100 /m 3 (3,500 /yd 3 ) fully extended at ground le with bucket curled /m 3 (3,000 /yd 3 ) Capacity based on ISO 7451: /m 3 (2,500 /yd 3 ) Bucket weight with General Duty tips /m 3 (2,000 /yd 3 ) 900 /m 3 (1,500 /yd 3 ) Not Recoended Caterpillar recoends usg appropriate work tools to maximize the value customers receive from our products. Use of work tools, cludg buckets, which are outside of Caterpillar s recoendations or specifications for weight, dimensions, flows, pressures, etc. may result less-than-optimal performance, cludg but not limited to reductions production, stability, reliability, and component durability. Improper use of a work tool resultg sweepg, pryg, twistg and/or catchg of heavy loads will reduce the life of the boom and stick. 15

16 Work Tool Offerg Guide* Boom Type HD Reach Boom Stick Size HD R2.5 (8'2") HD R2.9 (9'6") HD R2.5 (8'2") HD R2.9 (9'6") Long Undercarriage 3.7 mt (8,200 ) Counterweight 4.2 mt (9,300 ) Counterweight Hydraulic Haer B20 B20 (side mount) H115Es H120Es H130Es Compactor (Vibratory Plate) CVP110 Orange Peel Grapple Trash Grapple Thumbs Rakes P Grabber Coupler Cat PG These work tools are available for the. Consult your Cat dealer for proper match. *Offergs not available all areas. Matches are dependent on excavator configurations. Consult your Cat dealer to determe what is offered your area and for proper work tool match. Match 16

17 Standard and Optional Equipment Standard and Optional Equipment Standard and optional equipment may vary. Consult your Cat dealer for details. Standard Optional ENGINE Cat C7.1 ACERT Sgle Turbo 9 Cha Nonroad Stage III Three selectable power modes 9 One-touch low idle with automatic 9 enge speed control Automatic enge idle shutdown m (14,760 ft) altitude capability 9 with derate from 3000 m (9,840 ft) 52 C (125 F) high-ambient coolg 9 capacity Startg capability for 18 C (0 F) 9 with jump start receptacle Double element air filter 9 with tegrated precleaner Reversible electric coolg fans 9 Biodiesel capability up to B20 9 HYDRAULIC SYSTEM Boom and stick regeneration circuits 9 Electronic ma control valve 9 Auto warm up 9 Automatic two-speed travel 9 Boom and stick drift reduction valve 9 Element type ma hydraulic filter 9 Slider joysticks 9 Tandem type electronic ma pump 9 Haer return filter circuit 9 Combed flow/high pressure 9 auxiliary circuit Quick coupler circuit for Cat P Grabber 9 Standard Optional UNDERCARRIAGE AND STRUCTURES Tie-down pots on base frame 9 (ISO 15818:2017 compliant) Center track guidg guard 9 Segmented track guidg guard 9 Full length track guidg guard 9 Standard bottom guards 9 Heavy-duty bottom guard 9 Standard swivel guard 9 Standard travel motor guards 9 Heavy-duty travel motor guards 9 Grease lubricated track lks (8,200 ) counterweight (9,300 ) counterweight 9 for heavy-duty 4700 (10,400 ) counterweight 9 for Super Long Reach Standard swg frame 9 Semi-HD swg frame for HD and SLR 9 Standard swg bearg 9 HD base frame with SD track rollers and 9 standard carrier rollers Standard base frame with HD track 9 rollers and standard carrier rollers Fal drive with standard travel motor 9 BOOM, STICKS AND LINKAGES 600 (24") double grouser track shoes (24") triple grouser track shoes m (18'8") HD Reach boom m (9'6") HD stick 5.7 m(18'8") HD Reach boom m (8'2") HD stick Super Long Reach 8.85 m (29'0") boom 9 Super Long Reach 6.28 m (20'7") stick 9 Bucket lkage, B1-family without 9 liftg eye, Cat GRADE Bucket lkage, A-family without 9 liftg eye, SLR (contued on next page) 17

18 Standard and Optional Equipment Standard and Optional Equipment (contued) Standard and optional equipment may vary. Consult your Cat dealer for details. ELECTRICAL SYSTEM Mache electronic control module ( 2) 9 1,000 CCA matenance-free 9 batteries ( 2) 1,000 CCA matenance-free 9 batteries ( 4) Centralized electrical disconnect switch 9 Prograable time-delay LED 9 workg lights LED chassis light, LH and RH boom 9 lights for Reach and SLR, cab lights 850 lumens CAT CONNECT TECHNOLOGY Cat Product Lk 9 2D E-fence 9 Cat GRADE with 2D 9 (not available on SLR) Cat GRADE with Advanced 2D 9 (not available on SLR) Cat GRADE with 3D 9 (not available on SLR) CAT ASSIST Boom Assist 9 Bucket Assist 9 Swg Assist 9 Grade Assist 9 Standard Optional Standard Optional CAT PAYLOAD Static Weigh 9 Auto-Cabibration 9 Payload Information 9 SERVICE AND MAINTENANCE Samplg ports for Scheduled Oil 9 Samplg (S O S SM ) Preventative Matenance ready 9 (QuickEvac ) Grouped location for enge oil 9 and fuel filters Ground level second dipstick for enge oil 9 Remote flash 9 SAFETY AND SECURITY Rearview camera and side RH mirror visibility 9 Neutral lever (lock out) for all controls 9 Anti-skid plate and countersunk bolts 9 on service platform Ground-level accessible secondary enge 9 shutoff switch cab Radiator screen 9 Bluetooth receiver 9 RH handrail and hand hold 9 (ISO 2867:2011 compliant) Travel alarm (Hong Kong) 9 Attachments Dealer Installed Kit and Attachments Attachments may vary. Consult your Cat dealer for details. CAB SAFETY AND SECURITY GUARDS Radial lower wiper for 70/30 with washer RH electrical pedal for tool control Ra protector plus cab light cover Seat belt, retractable (75 /3 width) Polycarbonate roof hatch kit (comfort cab) Bluetooth key fob ELECTRICAL Jump start wirg LED premium lightg package Side rubber bumper FOGS (not compatible with cab light cover, ra protector) Mesh guard full front (not compatible with cab light cover, ra protector) Mesh guard lower half front 18

19 Cab Options Cab Options ROPS, standard sound suppression High-resolution 203 (8") LCD touch screen monitor High-resolution 203 (8") LCD touch screen monitor + additional monitor (only for use with Cat GRADE with Advanced 2D or Cat GRADE with 3D) High-resolution 254 (10") LCD touch screen monitor (only for use with 360 visibility) High-resolution 254 (10") LCD touch screen monitor + additional monitor (only for use with 360 visibility and Cat GRADE with Advanced 2D or Cat GRADE with 3D) Automatic bi-level air conditioner Jog dial and shortcut keys for monitor control Keyless push-to-start enge control Height-adjustable console, three steps with tool Height-adjustable console, fite with no tool Mechanically-adjustable seat suspension Air-adjustable seat suspension 51 (2") seat belt Seat heater Fixed left-side console Tilt-up left-side console Bluetooth tegrated radio with USB ports 12V DC outlets Document storage Cup and bottle holders Two-piece front wdow, openable Upper radial wiper with 70/30 with washer Steel hatch, openable Polycarbonate skylight hatch, openable LED dome and lower terior lights Roller front sunscreen Roller rear sunscreen Ra protector and cab light covers (only for use with 360 visibility) Beacon ready Washable floor mat Standard Optional Comfort Deluxe Not available 19

20 For more complete formation on Cat products, dealer services, and dustry solutions, visit us on the web at Caterpillar All rights reserved AEQ ( ) Replaces AEQ2196 Build Number: 07A (Cha/Hong Kong/Taiwan) Materials and specifications are subject to change without notice. Featured maches photos may clude additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used here, are trademarks of Caterpillar and may not be used without permission.