HAYING EQUIPMENT INDEX - CROP PREPARATION

Size: px
Start display at page:

Download "HAYING EQUIPMENT INDEX - CROP PREPARATION"

Transcription

1 HAYING EQUIPMENT INDEX - CROP PREPARATION LATEST PAGE EQUIPMENT DESCRIPTION REVISION NUMBER Index 09/01/ Mowers Models HM234/235/236 Economy Disc Mower 09/01/ Models H6730/H6740/H6750/H6830 Disc Mower 09/01/ Tedders ProTed Rotary Tedders 09/01/ Windrow Mergers Model H5410 Pull Behind Merger 09/01/ Model H5420 Swing Tongue Merger 09/01/ Model H5430 Swing Tongue Merger 09/01/ Rakes Models 256/258/260 Rolabar Rake 09/01/ Model 57 Mounted Rolabar Rake 09/01/16 23 Model 216 Unitized Rake 09/01/ ProRotor Rotary Rakes 09/01/ ProCart Deluxe Carted Wheel Rakes 09/01/ DuraVee Standard Wheel Rake 09/01/ DuraVee Deluxe Wheel Rake 09/01/ Model H5980 Heavy-Duty Wheel Rake 09/01/ Mower-Conditioners Discbine Disc Mower-Conditioners Models H7220/H7320 Side Pull 09/01/ Models H7230/H7330 Side Pull 09/01/ Discbine 313 Center Pivot 09/01/ Discbine 316 Center Pivot 09/01/ Haybine Sickle Mower-Conditioners Models 472/488 Side Pull 09/01/ Model H7150 Center Pull 09/01/ Page 1 of 152

2 HAYING EQUIPMENT INDEX - CROP PREPARATION (con't) LATEST PAGE EQUIPMENT DESCRIPTION REVISION NUMBER Speedrower Self-Propelled Windrowers Speedrower Tier 4B 09/01/ Speedrower Tier 4B 09/01/ Speedrower Tier 4B 09/01/ Self-Propelled Windrower Ballast Chart 09/01/16 95 DuraMerger 419 Windrow Merging Attachment 09/01/ Self-Propelled Windrower Heads Durabine Disc Heads Durabine 416 and Durabine /01/ HS Series Haybine Sickle Auger Heads Models HS14, HS16, and HS18 09/01/ Draper Belt Heads DuraSwath Series Draper Heads 09/01/ MegaCutter Triple Disc Mower-Conditioner MegaCutter 512 Front Mounted Disc Mower-Conditioner 09/01/ MegaCutter 530 Rear Mounted Disc Mower-Conditioner 09/01/ Parts Division Supplied Accessories 09/01/ Page 2 of 152

3 -HT1L 01 MODELS HM234/235/236 ECONOMY DISC MOWERS (Port of Entry) Standard Equipment HM DISC MOWER SPECIFICATIONS MODEL HM235 -Cutterbar Type: Low Profile Gear- -Cutting Width 6 ft. 9 in. (2.1M) Driven Common Sump Design -Num. Discs 5 Oval Cutting -Cutterbar Lift: Hyd. Single Acting -Knives per disc 2 Reversible -Disc Rock Guard Skid Shoes Standard -Hitch Cat II 3-pt.-Adjustable -Open Right-Side with Outside Drum -Flotation Inner/Outer Spring -Right-Side Swath Board -Protection Mechanical Breakaway -Two (2) Adjustable Parking Stands -Hydraulic Req. 1 SA -PTO Driveline with Overrunning Clutch -PTO Speed 540 RPM -PTO Shaft Storage Support -Tractor Req. Min. 40 PTO HP -3-Point Hitch Limit Chains MODEL HM236 NOTE: Only for use with tractors having -Cutting Width 7 ft. 11 in. (2.4M) a fully enclosed cab. -Num. Discs 6 Oval Cutting -Knives per Disc 2 Reversible MODEL HM234 -Hitch Cat II 3-Pt.-Adjustable -Cutting Width 5 ft. 6 in. (1.7M) -Flotation Inner/Outer Spring -Num. Discs 4 Oval Cutting -Protection Mechanical Breakaway -Knives per Disc 2 -Reversible -Hydraulic Req. 1 SA -Hitch Cat II 3-Pt.-Adjustable -PTO Speed 540 RPM -Flotation Inner/Outer Spring -Tractor Req. Min. 50 PTO HP -Protection Mechanical Breakaway -Hydraulic Req. 1 SA -PTO Speed 540 RPM WARRANTY -Tractor Req. Min. 35 PTO HP New Holland Standard Warranty Applies Models COMMERCIAL MODEL WORKING WIDTH Weight List Price HM234 5 ft. 6 in. Cut Width 933 LB $7, HM235 6 ft. 8 in. Cut Width 1,016 LB $8, HM236 7 ft. 10 in. Cut Width 11,215 LB $9, Page 3 of 152 -HT1L SEP-16

4 -HT1L 01 MODELS HM234/235/236 ECONOMY DISC MOWERS (Port of Entry) Factory Supplied Options Order Code Description Weight List Price FACTORY SUPPLIED OPTIONS WHEEL KITS SD_16030 INNER SWATH WHEEL KIT Inner Swath Wheel Kit 21 LB $ LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian 1 LB No Charge Spanish Manual - NA 1 LB No Charge X47083X No Additional Operators Manual No Charge Page 4 of 152 -HT1L SEP-16

5 -HT1L 01 MODELS HM234/235/236 ECONOMY DISC MOWERS (Port of Entry) Factory Supplied Attachments Order Code Description Weight List Price Inner Swath Wheel Kit 21 LB $ Page 5 of 152 -HT1L SEP-16

6 -HT1C 01 MODEL H6730/H6740/H6750/H6830 DISC MOWER (New Holland, PA) Standard Equipment **All mounted mowers must be ordered MODEL H6750 in multiples of 2 due to crating** -Cutting Width 9 ft. 2 in. (2.8M) -Num. Discs 7 Oval Discs DISC CUTTERBAR SPECIFICATIONS -Knives per Disc 2 Reversible -Type MowMax True Modular -Std. Knives 14 Smooth Edge Disc Cutterbar -Right-End Open with Swath -Protection ShockPRO Disc Drive Drum Hubs -Hitch Category II 3-Pt. -Rock Guard Heavy-Duty Cast Iron -Flotation Spring -Skid Shoes Hardened Steel- -Protection Mechanical Breakaway Replaceable -Hydraulic Req. 1 SA -Lift Mechanism Hyd. Single Acting -PTO Speed 540 RPM -PTO Protection Belt Drive w/ MODEL H6730 Overrunning Clutch -Cutting Width 6 ft. 8 in. (2.0M) -Tractor Req. Min. 60 PTO HP -Num. Discs 5 Oval Discs -Knives per Disc 2 Reversible MODEL H6830 Pull-Type Disc Mower -Std. Knives 14 Smooth Edge -Cutting Width 10 ft. 4 in. (3.14M) -Right-End Open with Swath -Avg. Swath 95 in. Drum -Num. Discs 8 Oval Discs -Hitch Category I or II 3-Pt. -Knives per Disc 2 Reversible -Flotation Spring -Std. Knives 14 Smooth Edge -Protection Mechanical Breakaway -Cutting Height Mechanical -Hydraulic Req. 1 SA -Hitch Clevis Hitch -PTO Speed 540 RPM -Trans. Width 10 ft. 10 in. -PTO Protection Belt Drive w/ -Flotation Spring - Vertical & Overrunning Clutch Lateral -Tractor Req. Min. 45 PTO HP -Chassis Tires 2-27 x , 6PR -Hydraulic Req. 1 SA MODEL H6740 -PTO Speed 540 RPM -Cutting Width 7 ft. 10 in. (2.4M) -PTO Type 80 Constant Velocity -Num. Discs 6 Oval Discs Drive -Knives per Disc 2 Reversible -PTO Protection Slip & Overrunning -Std. Knives 14 Smooth Edge Clutches -Right-End Open with Swath -Tractor Req. Min. 60 PTO HP Drum -Hitch Category II 3-Pt. NOTE: Only for use with tractors having -Flotation Spring a fully enclosed cab. -Protection Mechanical Breakaway -Hydraulic Req. 1 SA WARRANTY -PTO Speed 540 RPM -New Holland Standard Warranty -PTO Protection Belt Drive w/ Applies to Base Overrunning Clutch -Cutterbar Driveline Extended Warranty -Tractor Req. Min. 55 PTO HP 3 Years Page 6 of 152 -HT1C SEP-16

7 -HT1C 01 MODEL H6730/H6740/H6750/H6830 DISC MOWER (New Holland, PA) Models COMMERCIAL MODEL WORKING WIDTH Weight List Price H ft. 8 in. Cut Width 1,440 LB $10, H ft. 10 in. Cut Width 1,610 LB $12, H ft. 2 in. Cut Width 1,750 LB $13, H ft. 4 in. Cut Width 3,035 LB $21, Factory Supplied Options Order Code Description Weight List Price FACTORY SUPPLIED OPTIONS DISC MOWER OPTIONS SD_50047 HIGH STUBBLE KIT High Stubble Kit 92 LB $ SD_H5812 RH SWATHBOARD KIT RH Swathboard Kit (Not orderable with model H6830) 12 LB $ LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian Manual - NA 1 LB No Charge Spanish Manual - NA 1 LB No Charge Page 7 of 152 -HT1C SEP-16

8 -HT2I 01 PROTED ROTARY TEDDERS (Port of Entry) Standard Equipment ProTed 3417 TEDDER FEATURES ProTed 3625 TEDDER FEATURES ProTed 3417 rotary tedder features ProTed 3625 rotary tedder offers 50% four large-diameter rotors offering an more productivity than four-rotor increased width compared to the prior models. HD frame design and model 163 rotary tedder. New HD box- enclosed ProTed rotor-gearboxes frame design and ProTed rotor- lubricated by oil deliver reliable service gearboxes lubricated by grease deliver year-after-year. Three position rotor reliable service year-after-year. This angle adjustment for more uniform drawbar trailed model folds vertically crop spreading. Border tedding angles and automatically raises the tines for the tedder when working along field transport. When work is resumed the edges. A transport frame supports the tines automatically return to the machine on large tires allowing preset adjustment without mechanical operation with smaller tractors than adjustments. mounted tedder models. PROTED 3417 SPECIFICATIONS PROTED 3625 SPECIFICATIONS -Overall Width 19 ft. (5.8M) -Overall Width 25 ft. 9 in. (7.9M) -Working Width 17 ft.1 in.(5.2m) -Working Width 24 ft. 11 in(7.6m) -Hitch Drawbar -Hitch Drawbar -Num. Rotors 4 -Num. Rotors 6 -Num. Tine Arms 6 -Num. Tine Arms 7 -Rotor Lubrication Grease -Rotor Lubrication Oil Bath -Transport Width 9 ft. 6 in.(2.9m) -Transport Width 9 ft. 9 in.(2.98m) -Transport Height 8 ft. 8 in.(2.64m) -Transport Height 13 ft. 1 in. (4M) -Transport Length 8 ft. 6 in.(2.6m) -Transport Length 12 ft. 6 in. (3.8M) -Transport Speed 31 MPH (50 KPH) -Transport Speed 31 MPH (50 KPH) -Shipping weight 904 lbs.(410 KG) -Shipping Weight 2640 lbs(1190kg) -Driveline Std. U-Joint -Driveline U-Joint & CV -Protection Radial Pin Clutch -Protection Radial Pin Clutch -Tires 16x Rotor Support Tires 4, 16x6.5-8 STANDARD & OPTIONAL EQUIPMENT 2, 18x Anti-Wrap Fenders Standard -Transport Tires 2, 10/ Jack & Safety Chain Standard STANDARD & OPTIONAL EQUIPMENT -Tine Saver Clips Optional -Adj. Rotor Angle Standard -Anti-Wrap Deflectors Optional -Border Tedding Standard TRACTOR REQUIREMENTS -Anti-Wrap Fenders Standard -PTO Speed 540 RPM -Jack & Safety Chain Standard -Power Req. 20 HP (15 KW) -Transport Lighting Standard -Hydraulic Req. 1 SA -Tine Saver Clips Optional -Anti-Wrap Deflectors Optional TRACTOR REQUIREMENTS -PTO SPEED 540 RPM -Power Req. 50 HP (37 KW) -Hydraulic Req. 1 SA & 1 DA -Electrical Req. 7-Pin Lighting Page 8 of 152 -HT2I SEP-16

9 -HT2I 01 PROTED ROTARY TEDDERS (Port of Entry) Standard Equipment ProTed 3836 TEDDER FEATURES PROTED 3836 SPECIFICATIONS ProTed 3836 rotary tedder features -Width in Work Pos. 37 ft.2 in.(11.3m) twice the productivity of four-rotor -Working Width 36 ft. 1 in.(11m) models. HD frame design and -Attachment 2-Pt (Cat I & II) ProTed rotor gearboxes deliver -Num. Rotors 8 reliable service year-after-year. Three -Num. Tine Arms 7 position angle adjustment provides -Rotor Lubrication Oil Bath more uniform crop spreading. Border -Transport Width 9 ft. 9 in.(2.9m) tedding angles the tedder when -Transport Height 10 ft. 9 in.(3.3m) working along field edges. 2-Pt. semi -Transport Length 19 ft.4 in. (5.9M) mounted trailed design allows for use -Transport Speed 31 MPH (50 KPH) with smaller tractors than fully- -Shipping weight 3571 lbs. (1620KG) mounted models. A transport frame -Driveline U-Joint & CV supports the rotors on large tires. -Protection Radial Pin Clutch -Rotor Support Tires 6, 16x , 18x Transport Tires 2, 10/ STANDARD & OPTIONAL EQUIPMENT -Adj. Rotor Angle Standard -Border Tedding Standard -Anti-Wrap Fenders Standard -Transport Lighting Standard -Tine Saver Clips Optional -Anti-Wrap Deflectors Optional TRACTOR REQUIREMENTS -PTO SPEED 540 RPM -Power Req. 60 HP (45 KW) -Hydraulic Req. 1 SA & 1 DA -Electrical Req. 7-Pin Lighting WARRANTY New Holland Standard Warranty Applies Page 9 of 152 -HT2I SEP-16

10 -HT2I 01 PROTED ROTARY TEDDERS (Port of Entry) Models COMMERCIAL MODEL Weight List Price PROTED ,180 LB $9, PROTED ,420 LB $24, PROTED ,570 LB $37, Factory Supplied Options Order Code Description Weight List Price HAYTOOL OPTIONS RAKE OPTIONS SD_H6205 TINE SAVER CLIPS Tine Saver Clips PT3417 kit of 34 PT3525 kit of 42 PT3836 kit of 56 if MODEL is PT3417 $ if MODEL is PT3625 $ if MODEL is PT3836 $ SD_H6220 DEFLECTORS Anti-Wrap Deflectors Anti-Wrap Deflector/ Fenders, attach to the wheel columns providing additional protection against wrapping. PT3417 kit of 2 PT3625 kit of 4 PT3836 kit of 6 if MODEL is PT3417 $ if MODEL is PT3625 $ if MODEL is PT3836 $ MANUALS OPERATORS SD_47083 OPERATOR'S MANUAL French Canadian No Charge Spanish Manual - NA No Charge Page 10 of 152 -HT2I SEP-16

11 -HT2I 01 PROTED ROTARY TEDDERS (Port of Entry) Factory Supplied Attachments Order Code Description Weight List Price Tine Saver Clips-24: PT LB $ Tine Saver Clips-42: PT LB $ Tine Saver Clips-56: PT LB $ Anti-Wrap Deflectors PT LB $ Attach to the wheel columns providing additional protection against wrapping. PT3417 kit of 2 deflectors Anti-Wrap Deflectors PT LB $ Attach to the wheel columns providing additional protection against wrapping. PT3625 kit of 4 deflectors Anti-Wrap Deflectors PT3836 Attach to the wheel columns providing additional protection against wrapping. PT3836 kit of 6 deflectors 55 LB $ Page 11 of 152 -HT2I SEP-16

12 -HT2B 01 MODEL H5410 WINDROW MERGER/INVERTER (Marshfield, WI) Standard Equipment H5410 MERGER SPECIFICATIONS MINIMUM TRACTOR REQUIREMENTS -Hitch Type Center - Fixed Tongue TRACTOR HYDRAULIC DRIVEN VERSION -Attachment Clevis Hitch -Hydraulic Req. 1 DA Pickup Lift -Transport Wheels 3, 6.70 x 15 in. 1 DA Merger Drive -Transport Locks Standard *MIN PSI -Transport Safety Chain Standard -Tractor Req. Min. 70 PTO HP -Transport Lighting Standard PICKUP SPECIFICATIONS MINIMUM TRACTOR REQUIREMENTS -Width 9 ft. SELF- CONTAINED DRIVE VERSION -Type Belt & Finger Design -Hydraulic Req. 1 DA Pickup Lift -Offset Center/Windrow Straddle -Tractor Req. Min. 70 PTO HP -Num. Belts 3-Section -Finger Type Poly 3-Prong *** Recommended when working -Windguard Rolling w/ Hay Guides with tractors of limited hydraulic -Gauge Wheels 2, 5.70 x 8 flow/pressure & cooling capacity.*** CROSS CONVEYOR SPECIFICATIONS DEALER ASSEMBLY REQUIRED: -Belt Type Raised Rib Units with self-contained hydraulic drive -Conveyor Width 14 ft. are shipped without the reservoir and -Conveyor Depth 42 in. hydraulic pump installed. The hydraulic -Reversing Conveyor by Quick reservoir is shipped dry requiring 30 Coupler gallons of hydraulic oil (dealer supplied). -Merging Delivery Right Side -Inverting Delivery Left Side WARRANTY -Anti-Wrap Hay Guards Standard New Holland Standard Warranty Applies OPTIONAL EQUIPMENT -Inversion Chute -2 ft. Conveyor Extension Page 12 of 152 -HT2B SEP-16

13 -HT2B 01 MODEL H5410 WINDROW MERGER/INVERTER (Marshfield, WI) Models COMMERCIAL MODEL MODEL PTO Weight List Price H5410 H5410R 9FT- Roller Tractor Driven Hydraulics 3,380 LB $24, Windguard H5410 H5410R 9FT- Roller Windguard PTO Driven Hydraulic Pump 3,380 LB $28, Factory Supplied Options Order Code Description Weight List Price FACTORY SUPPLIED OPTIONS MISCELLANEOUS SD_H5401 Windrow Inverter Attachment Windrow Inverter Attachment $ SD_H7001 Conveyor Extension ft. Conveyor Extension $1, LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian 1 LB No Charge FIELD INSTALLED OPTIONS WINDROW INVERTER OPTIONS SD_03002 PTO FI PTO HYD DRIVE KIT $3, Page 13 of 152 -HT2B SEP-16

14 -HT2B 01 MODEL H5410 WINDROW MERGER/INVERTER (Marshfield, WI) Factory Supplied Attachments Order Code Description Weight List Price Windrow Inverter Attachment-LH 30 LB $ FT Conveyor Extension-RH Side Only Fixed position, RH discharge only 226 LB $1, Page 14 of 152 -HT2B SEP-16

15 -HT2B 02 MODEL H5420 WINDROW MERGER/INVERTER (Marshfield, WI) Standard Equipment H5420 MERGER SPECIFICATIONS OPTIONAL EQUIPMENT -Hitch Type Right-Pivoting Tongue -Inversion Chute -Attachment Clevis Hitch -2 ft. Folding Conveyor Extension -Transport Wheels 3, 6.70 x 15 in. -4 ft. Folding Conveyor Extension -Transport Locks Standard -6 ft. Folding Conveyor Extension -Transport Safety Chain Standard -Cross Conveyor Shut-Off Kit -Transport Lighting Standard MINIMUM TRACTOR REQUIREMENTS PICKUP SPECIFICATIONS TRACTOR HYDRAULIC DRIVEN VERSION -Width 9 ft. -Hydraulic Req. 1 DA Pickup Lift & -Type Belt & Finger Design Tongue Pivot -Offset Right Hand 1 DA Merger Drive -Num. Belts 3-Section *MIN Finger Type Poly 3-Prong PSI* -Windguard Rolling w/ Hay Guides -Tractor Req. Min. 70 PTO HP -Gauge Wheels 2, 5.70 x 8 CROSS CONVEYOR SPECIFICATIONS MINIMUM TRACTOR REQUIREMENTS -Belt Type Raised Rib SELF- CONTAINED DRIVE VERSION -Conveyor Width 14 ft. -Hydraulic Req. 1 DA Pickup Lift & -Conveyor Depth 42 in. Tongue Pivot -Reversing Conveyor by Quick -Tractor Req. Min. 70 PTO HP Coupler -Merging Delivery Right Side *** Recommended when working -Inverting Delivery Left Side with tractors of limited hydraulic -Anti-wrap hay guards Standard flow/pressure & cooling capacity.*** ELECTRONIC MERGER CONTROLS DEALER ASSEMBLY REQUIRED: -Tongue Swing Units with self-contained hydraulic drive -Pickup Raise/Lower are shipped without the reservoir and -Extension Raise/Lower (if Equipped) hydraulic pump installed. The hydraulic reservoir is shipped dry requiring 30 gallons of hydraulic oil (dealer supplied). WARRANTY New Holland Standard Warranty Applies Page 15 of 152 -HT2B SEP-16

16 -HT2B 02 MODEL H5420 WINDROW MERGER/INVERTER (Marshfield, WI) Models COMMERCIAL MODEL MODEL PTO Weight List Price H5420 H5420 Merger Tractor Driven Hydraulics 3,780 LB $30, H5420 H5420 Merger PTO Driven Hydraulic Pump 3,150 LB $34, Factory Supplied Options Order Code Description Weight List Price FACTORY SUPPLIED OPTIONS MISCELLANEOUS SD_H5401 Windrow Inverter Attachment Windrow Inverter Attachment $ SD_H5402 Cross Conveyor Shut Off Cross Conveyor Shut-Off Kit $1, SD_H7001 Conveyor Extension ft. Conveyor Extension $3, ft. Conveyor Extension $4, ft. Conveyor Extension $4, LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian 1 LB No Charge Page 16 of 152 -HT2B SEP-16

17 -HT2B 02 MODEL H5420 WINDROW MERGER/INVERTER (Marshfield, WI) Factory Supplied Attachments Order Code Description Weight List Price Windrow Inverter Attachment-LH 30 LB $ Cross Conveyor Shut-Off Kit 15 LB $1, Allows cross conveyor to be shut off while pickup continues to operate FT Conveyor Extension-RH Side Only 381 LB $4, Hydraulic folding, RH discharge only (includes extension shut-off) FT Conveyor Extension-RH Side Only 336 LB $4, Hydraulic folding, RH discharge only (includes extension shut-off) FT Conveyor Extension-RH Side Only Hydraulic folding, RH discharge only (includes extension shut-off) 291 LB $3, Page 17 of 152 -HT2B SEP-16

18 -HT2B 03 MODEL H5430 WINDROW MERGER/INVERTER (Marshfield, WI) Standard Equipment H5430 MERGER SPECIFICATIONS OPTIONAL EQUIPMENT -Hitch Type Right-Pivoting Tongue -Inversion Chute -Attachment Clevis Hitch -2 ft. Folding Conveyor Extension -Transport Wheels 3, 6.70 x 15 in. -4 ft. Folding Conveyor Extension -Transport Locks Standard -6 ft. Folding Conveyor Extension -Transport Safety Chain Standard -Cross Conveyor Shut-Off Kit -Transport Lighting Standard MINIMUM TRACTOR REQUIREMENTS PICKUP SPECIFICATIONS TRACTOR HYDRAULIC DRIVEN VERSION -Width 12 ft. -Hydraulic Req. 1 DA Pickup Lift & -Type Belt & Finger Design Tongue Pivot -Offset Right Hand 1 DA Merger Drive -Num. Belts 4-Section *MIN Finger Type Poly 3-Prong PSI* -Windguard Rolling w/ Hay Guides -Tractor Req. Min. 70 PTO HP -Gauge Wheels 2, 5.70 x 8 CROSS CONVEYOR SPECIFICATIONS MINIMUM TRACTOR REQUIREMENTS -Belt Type Raised Rib SELF- CONTAINED DRIVE VERSION -Conveyor Width 14 ft. -Hydraulic Req. 1 DA Pickup Lift & -Conveyor Depth 42 in. Tongue Pivot -Reversing Conveyor By Quick -Tractor Req. Min. 70 PTO HP Coupler -Merging Delivery Right Side *** Recommended when working -Inverting Delivery Left Side with tractors of limited hydraulic -Anti-Wrap Hay Guards Standard flow/pressure & cooling capacity.*** ELECTRONIC MERGER CONTROLS DEALER ASSEMBLY REQUIRED: -Tongue Swing Units with self-contained hydraulic drive -Pickup Raise/Lower are shipped without the reservoir and -Extension Raise/Lower (if Equipped) hydraulic pump installed. The hydraulic reservoir is shipped dry requiring 30 gallons of hydraulic oil (dealer supplied). WARRANTY New Holland Standard Warranty Applies Page 18 of 152 -HT2B SEP-16

19 -HT2B 03 MODEL H5430 WINDROW MERGER/INVERTER (Marshfield, WI) Models COMMERCIAL MODEL MODEL PTO Weight List Price H5430 H5430 Merger Tractor Driven Hydraulics 4,320 LB $35, H5430 H5430 Merger PTO Driven Hydraulic Pump 4,320 LB $40, Factory Supplied Options Order Code Description Weight List Price MISCELLANEOUS SD_H5401 Windrow Inverter Attachment Windrow Inverter Attachment $ SD_H5402 Cross Conveyor Shut Off Cross Conveyor Shut-Off Kit $1, SD_H7001 Conveyor Extension ft. Conveyor Extension $3, ft. Conveyor Extension $4, ft. Conveyor Extension $4, LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian 1 LB No Charge Page 19 of 152 -HT2B SEP-16

20 -HT2B 03 MODEL H5430 WINDROW MERGER/INVERTER (Marshfield, WI) Factory Supplied Attachments Order Code Description Weight List Price Windrow Inverter Attachment-LH 30 LB $ Cross Conveyor Shut-Off Kit 15 LB $1, Allows cross conveyor to be shut off while pickup continues to operate FT Conveyor Extension-RH Side Only 381 LB $4, Hydraulic folding, RH discharge only (includes extension shut-off) FT Conveyor Extension-RH Side Only 336 LB $4, Hydraulic folding, RH discharge only (includes extension shut-off) FT Conveyor Extension-RH Side Only Hydraulic folding, RH discharge only (includes extension shut-off) 291 LB $3, Page 20 of 152 -HT2B SEP-16

21 -HT2O 01 MODELS 256, 258 AND 260 RAKES (New Holland, PA) Standard Equipment Model 256 SPECIFICATIONS Model 258 & 260 SPECIFICATIONS -Raking Width 8 ft. 6 in. -Raking Width 9 ft. 6 in. -Delivey Left Side -258 Delivery Left Side -Num. Tines Delivery Right Side -Tines Spring or Rubber -Num. Tines 100 -Num. Tine Bars 5 -Tines Spring or Rubber -Tine Bar Bearings Sealed Ball -Num. Tine Bars 5 -Basket Angle Manual Adjustable -Tine Bar Bearings Sealed Ball Bearings -Basket Height Manual Adjustable -Basket Angle Manual, Adjustable -Basket Suspension Spring -Basket Height Manual, Adjustable -Basket Lubrication 100 Acre -Basket Suspension Spring -Attachment Clevis Hitch -Basket Lubrication 100 Acre -Parking Stand Jack -Attachment Clevis Hitch -Ground Drive Mechanical Ground -Parking Stand Jack Driven with lock-out -Ground Drive Mechanical Ground -Tires 2, 5.0 x 15 4 PR (I3) Driven with Lock-Out -Trans. Safety Chain Standard -Hydraulic Drive 1 DA Remote Req PSI) OPTIONAL -Tires 2, 5.0 x 15 4 PR (I3) -Hitch & Dolly Wheel Kit -Trans. Safety Chain Standard -Wheel Tire Kit 2, 27 x PR OPTIONAL WARRANTY -Hitch & Dolly Wheel Kit New Holland Standard Warranty Applies -Wheel Tire Kit 2, 27 x PR WARRANTY New Holland Standard Warranty Applies Models COMMERCIAL MODEL TINE Weight List Price 256 RAKE BTO STEEL 840 LB $7, RAKE BTO RUBBER 840 LB $7, RAKE BTO STEEL 840 LB $8, RAKE BTO RUBBER 1,115 LB $9, RAKE BTO HYD RUBBER 1,115 LB $9, RAKE BTO RUBBER 1,095 LB $10, RAKE BTO HYD RUBBER 1,095 LB $10, Page 21 of 152 -HT2O SEP-16

22 -HT2O 01 MODELS 256, 258 AND 260 RAKES (New Holland, PA) Factory Supplied Options Order Code Description Weight List Price COMPLETING PACKAGES COMPLETING PACKAGES SD_41007 HITCH Dolly Wheel 15 Inch $ Dolly Wheel replaces Hitch and Jack (Wheels only / Less tires) Hitch and Jack Unit No Charge HAYTOOLS TIRES AND WHEELS TIRES AND WHEELS SD_16066 WHEELS AND TIRES X , 4 PR (G4) $ FACTORY SUPPLIED OPTIONS LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian No Charge Spanish Manual - NA No Charge Page 22 of 152 -HT2O SEP-16

23 -HT2O 02 MODEL 57 MOUNTED RAKE (New Holland, PA) Standard Equipment Model 57 SPECIFICATIONS BASKET SPECIFICATIONS -Raking Width 8 ft. 6 in. -Num. Tines 90 -Hitch 3-Point Mounted -Tines Spring or Rubber -PTO Speed 540 RPM -Num. Tine Bars 5 -Parking Stand Standard -Tine Bar Bearings Sealed Ball Bearings -Gauge Wheels 2 Caster Wheels -Gauge Wheel Type Rubber Tires -Basket Lubrication 100 Acre WARRANTY New Holland Standard Warranty Applies Models COMMERCIAL MODEL TINE Weight List Price 57 RAKE BTO STEEL 780 LB $6, RAKE BTO RUBBER 780 LB $6, Factory Supplied Options Order Code Description Weight List Price French Canadian No Charge Spanish Manual - NA No Charge Page 23 of 152 -HT2O SEP-16

24 -HT1X 01 MODEL 216 UNITIZED RAKE (Milwaukee, WI) Standard Equipment Model 216 SPECIFICATIONS -Max. Raking Width 27 ft. BASKET SPECIFICATIONS -Delivery Center -Num. Baskets 2 -Hitch Adjustable Clevis -Basket Width 10 ft. 6 in. -Trail Frame Unitized -Num. Tines 110 x 2 -Controls Tractor mounted -Tines Rubber Control Box and One -Num. Tine Bars 5 x 2 Remote Valve -Tine Bar Bearings Sealed Ball Bearings -Tires 2, 11L x 15 -Tine Stripper Bar Standard -Trans. Safety Chain Standard -Basket Angle Manual,Adjustable -Basket Height Manual,Adjustable TRACTOR REQUIREMENTS -Basket Suspension 3-PT./Spring -Hyd. Drive 1 DA Remote Req. -Basket Speed Adjustable 2000 PSI) -Hyd. Functions 1 DA Remote Req. WARRANTY -Tractor Req. Min. 50 PTO HP New Holland Standard Warranty Applies Models COMMERCIAL MODEL Weight List Price 216 RAKE 2,960 LB $32, Factory Supplied Options Order Code Description Weight List Price FACTORY SUPPLIED OPTIONS WHEEL KITS SD_16026 FRONT GAUGE WHEEL K Front Gauge Wheel Kit For better flotation use front gauge wheel kit 100 LB $1, SD_16035 REAR GAUGE WHEEL KI Rear Gauge Wheel Kit 100 LB $1, Page 24 of 152 -HT1X SEP-16

25 -HT1X 01 MODEL 216 UNITIZED RAKE (Milwaukee, WI) LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian 1 LB No Charge Page 25 of 152 -HT1X SEP-16

26 -HT2F 01 PROROTOR ROTARY HAY RAKES (Port of Entry) Standard Equipment ProRotor rotary hay rakes rake ProRotor 3114 KEY SALES FEATURES clean and help to improve forage The single-rotor ProRotor 3114 rakes quality by improving leaf retention. individual windrows, or doubles up Like a mechanical pitchfork each each windrow when working with a tine lifts and carries the crop to the ten-foot mower for the most efficient windrow. baling and harvesting possible. Long flexible rake tines sweep through ProRotor 3114 SPECIFICATIONS the stubble without contacting the soil -DIN* Raking Width 13 ft. 9 in. (4.2M) reducing contaminants swept in the *Includes Maximum Windrow Width windrow. -Rotor Diameter 11 ft. (3.3M) -Clean Sweep 9 ft. 8 in. (2.95M) The gentle rotary action builds an easy- -Num. Tine Arms 11 baling windrow that promotes continued -Num. Tines Per Arm 4 drying and resists blowing in high-winds. -Tine Lift Height 20 in. (50 CM) -Windrow Delivery Left-Hand For better leaf retention in delicate -Transport Width 6 ft. 7 in. (2.0M) legume crops rake at a slightly higher -Transport Length 12 ft. 10 in.(3.9m) moisture level and match PTO speed -Shipping Weight 1256 lbs (570 KG) to crop volume. -Driveline Double CV PTO -Protection Radial Pin Clutch For optimum raking performance the -Tires 4, 18 x 8.5-8, PR6 minimum recommended cutting height 1-1/2 in. to 2 in. STANDARD & OPTIONAL EQUIPMENT -Tandem Axles Standard ProRotor KEY SALES FEATURES -Special Hitch Pin Standard Three ProRotor Rake Models -Safety Chain Standard Single Rotor Side Delivery -Tine Saver Kit Optional Dual Rotor Side Delivery -Road Lights Optional Dual Rotor Center Delivery TRACTOR REQUIREMENTS Gentle & Clean, Rotary Raking Action -PTO Speed 540 RPM Oil Lubricated Sealed Rotor Gearbox -Power Req. 20 HP (15 KW) Tangential Mounted, Curved Tine Arms -Hydraulic Req. 1 SA Specially Formed Rake Tines Adjustable Swath Curtain Hydraulic Lift Folding Guards, Removable Tine Arms Adjustable Storage Jack WARRANTY New Holland Standard Warranty Applies Page 26 of 152 -HT2F SEP-16

27 -HT2F 01 PROROTOR ROTARY HAY RAKES (Port of Entry) Standard Equipment ProRotor 3223 KEY SALES FEATURES ProRotor 3226 KEY SALES FEATURES The dual-rotor ProRotor 3223 can rake The dual-rotor ProRotor 3226 can rake one large double windrow with a single two swaths up to 8' wide from a 16 pass or two individual windrows when foot windrower with just one pass equipped when equipped with the making it ideal for large balers. optional front swath board. In double windrow raking mode it is ProRotor 3226 SPECIFICATIONS possible to merge four swaths into a -DIN* Raking Width# single large windrow ideal for pickup by Minimum 23 ft.(7.0m) balers and forage harvesters. Maximum 25 ft.7in.(7.8m) *Includes Windrow Width ProRotor 3223 SPECIFICATIONS -Rotor Diameter 2x11 ft.(3.3m) -DIN* Raking Width -Clean Sweep 2x9 ft. 8in.(2.9M) Double Windrow 23 ft. 3 in.(7.1m) -Num. Tine Arms 11 Single Windrow 21ft. 8 in. (6.6M) -Num. Tines Per Arm 4 *Includes Maximum Windrow Width -Windrow Delivery Center -Rotor Diameter 9 ft. 10 in. (3.0M) -Hitch Category II -Clean Sweep 16 ft. (4.9M) -Attachment 2-Pt. Arms -Num. Tine Arms -Max. Turn Angle 85 Front Rotor 11 -Transport Width 9 ft.2 in.(2.8m) Rear Rotor 12 -Transport Length 19 ft. 4 in.(5.9m) -Num. Tines Per Arm 4 -Weight 3615 lbs (1640 KG) -Tine Lift Height 20 in. (50 CM) -Driveline Double CV PTO -Windrow Delivery Left-Hand -Protection Radial Pin Clutch -Transport Width 7 ft. 3 in. (2.2M) -Rotor Undercarriage Tricycle -Transport Length 24 ft. 3 in (7.4M) -Rotor Articulation 3D -Weight 2976 lbs (1350 KG) -Num. Tires 6 -Driveline Double CV PTO -Undercarriage Tires 16x6.5-8 PR6 -Protection Radial Pin Clutch -Frnt Guide wheels Standard -Tires 8,18 x 8.5-8, PR6 -Tandem Axle Pkg. Optional -Frame Central Chassis STANDARD & OPTIONAL EQUIPMENT -Chasis Tires 10.0/ Frnt/Rear Tandem Axles Standard -Special Hitch Pin Standard STANDARD & OPTIONAL EQUIPMENT -Safety Chain Standard -Central Swath Board Standard -Transport Lighting Standard -Rear Wheel Steerring Standard -Second Swathboard Standard -Transport Lighting Standard -Tine Saver Kit Optional -Tine Saver Kit Optional -Addtnl Support Whls Optional -Tandem Axle Optional -Single Side Rotor Lift Optional TRACTOR REQUIREMENTS PTO Speed 540 RPM TRACTOR REQUIREMENTS Power Req. 50 PTO HP(37KW) -PTO Speed 540 RPM Hydraulic Req. 1 DA and 1 SA -Power Req. 50 PTO HP (37 KW) -Hydraulic Req. 1 DA and 1 SA Page 27 of 152 -HT2F SEP-16

28 -HT2F 01 PROROTOR ROTARY HAY RAKES (Port of Entry) Models COMMERCIAL MODEL Weight List Price PROROTOR LBS $10, PROROTOR LBS $28, Factory Supplied Options Order Code Description Weight List Price HAYTOOL OPTIONS RAKE OPTIONS SD_H5404 ROAD LIGHTS Road Lights For 3114 Only 6LBS $ SD_H6205 TINE SAVER CLIPS Tine Saver Clips 15LBS if MODEL is PR LBS $ if MODEL is PR LBS $ SD_H6206 ADD SUPPORT WHLS Additional Support Wheels Provides a third set of adjustable wheels (16x6.5-8) on the front of the rear undercarriage providing extra stability on hillsides and improved contour following rough fields. ProRotor 3223 ONLY. $ Page 28 of 152 -HT2F SEP-16

29 -HT2F 01 PROROTOR ROTARY HAY RAKES (Port of Entry) Factory Supplied Attachments Order Code Description Weight List Price Road Lights 5 LB $ Only Available on PROROTOR TINE SAVER CLIPS PR LB $ TINE SAVER CLIPS PR LB $ Additional support wheels 2X18.5IN 39 LB $ nd Swathboard-Front Rotor Only for ProRotor LB $ Page 29 of 152 -HT2F SEP-16

30 -HT2F 02 PROROTOR 3226 ROTARY RAKES, CENTR DELIV (Port of Entry) Models COMMERCIAL MODEL Weight List Price PROROTOR LBS $30, Factory Supplied Options Order Code Description Weight List Price SD_H6205 TINE SAVER CLIPS Tine Saver Clips 15LBS $ SD_H6208 TANDEM AXLE UNDERCARRAGE Tandem Axle Undercarrage Recommended when raking in rolling or uneven field conditions. SD_H6209 SINGLE SIDE ROTOR LIFT SS RTR LFT ELEC HYD Required for turning previously raked windrows, allows for easier finishing of oddly shaped fields with point rows. Electrohydraulic joystick is supplied for control 30LBS $1, $ Page 30 of 152 -HT2F SEP-16

31 -HT2F 02 PROROTOR 3226 ROTARY RAKES, CENTR DELIV (Port of Entry) Factory Supplied Attachments Order Code Description Weight List Price TINE SAVER CLIPS PR LB $ TNDM AXL F/UNDERCARRIAGE 111 LB $1, Single-Side, Rotor-Lift Kit Electro HYD ProRotor 3226 Only 3 LB $ Page 31 of 152 -HT2F SEP-16

32 -HT2D 01 PROCART DELUXE CARTED WHEEL RAKES (Port of Entry) Standard Equipment ProCart high capacity, center-delivery PROCART 819 SPECIFICATIONS carted rake in 8, 10, or 12 wheel -Num. Rake Wheels 8 versions; the 8-wheel version is -Min. Working Width 16 ft. 4 in.* convertible to 10 raking wheels. The -Max. Working Width 18 ft.* leading rake wheel (10 & 12 Wheel) -Min. Windrow Width 3 ft.* can be raised & locked out of the work -Max. Windrow Width 6 ft. 7 in.* position quickly adjusting raking width. -Trans. Width 8 ft. 5 in. -Min. Trans. Height 7 ft. 9 in. Individual floating rake wheels are spring -Hydraulic Req. 1 DA suspended to optimize ground -Tractor Req. 30 HP contact. High-capacity curved rake wheel arms provides uniform crop flow. PROCART 1022 SPECIFICATIONS -Num. Rake Wheels 10 Vertical/flat folding provides clearance -Min. Working Width 19 ft.* and stability when transporting with -Max. Working Width 21 ft.* standard of turning windrows with -Min. Windrow Width 3 ft.* either the right or left arm. -Max. Windrow Width 6 ft., 7 in.* -Trans. Width 8 ft. 5 in. PROCART RAKE SPECIFICATIONS -Min. Trans. Height 7 ft. 9 in. -Type "Vee" -Hydraulic Req. 1 DA -Delivery Center -Tractor Req. 30 HP -Hitch Clevis -Wheel Lift Hydraulic PROCART 1225 SPECIFICATIONS -Folding Hyd. Vertical/Flat -Num. Rake Wheels 12 -Width/Angle Control Mechanical -Min. Working Width 21 ft. 8 in.* -Tires 2, x 15 -Max. Working Width 24 ft. 6 in.* -Parking Stand/Jack Standard -Min. Windrow Width 3 ft.* -Trans. Safety Chain Standard -Max. Windrow Width 6 ft. 7 in.* -SMV & Reflectors Standard -Trans. Width 10 ft. 2 in. -Windrow Turning Standard -Min. Trans. Height 7 ft. 9 in. -Hydraulic Req. 1 DA -Tractor Req. 50 HP RAKE WHEELS -Diameter 55 in. *Depending on crop conditions -Num. Tines 40 -Tine Diameter 7MM OPTIONAL EQUIPMENT -Wheel Mounting Individual -Center Kicker Wheel Kit -Flotation Adj. Springs -8 to 10 Rake Wheel Conversion Kit -Wheel Arm Pivots Nylon Bushing -Hyd. Angling Kit (Hyd. Req. 2 DA) -Greaseable Pivots Yes NOTE: For extreme hillside applications, WARRANTY choose the ProCart series wheel rakes New Holland Standard Warranty Applies over DuraVee series wheel rakes. **Not for sale in Quebec** Page 32 of 152 -HT2D SEP-16

33 -HT2D 01 PROCART DELUXE CARTED WHEEL RAKES (Port of Entry) Models COMMERCIAL MODEL Weight List Price PROCART 819 1,812 LB $6, PROCART ,012 LB $7, PROCART ,252 LB $8, Factory Supplied Options Order Code Description Weight List Price SD_16019 CENTER KICKER WHEEL Center Kicker Wheel Hydraulic lift and lockout SD_16064 WHEEL CONVERSION Wheel Conversion Kit For converting a ProCart 819 to a ten wheel rake only SD_20087 HYDRAULIC FRAME ANGLING KIT Hydraulic Angling Kit Requires a second double acting remote valve $ $ $1, Page 33 of 152 -HT2D SEP-16

34 -HT2D 01 PROCART DELUXE CARTED WHEEL RAKES (Port of Entry) Factory Supplied Attachments Order Code Description Weight List Price Hyd Angling Kit 8/10 Wheel 57 LB $1, for 8 and 10 wheel versions (requires second remote valve) Hyd Angling Kit 12 Wheel 57 LB $1, for 12 wheel version (requires second remote valve) Center Kicker Wheel NH 105 LB $ to 10 Wheel Conversion Kit 256 LB $ Page 34 of 152 -HT2D SEP-16

35 -HT2Q 01 DURAVEE SERIES STANDARD WHEEL RAKES Standard Equipment DURAVEE RAKE SPECIFICATIONS -Type "VEE" DURAVEE 817 SPECIFICATIONS -Delivery Center -Num. Rake Wheels 8 -Wheel Lift Hyd. - Rack Lift -Max. Working Width 17 ft. 5 in. -Folding Hyd.- Front Folding -Trans. Width 8 ft. 3 in. -Width Control Hyd. Pilot Valve -Overall Length 21 ft. 7 in. -Windrow Control Mechanical -Tractor Req. 30 HP -Hydraulic Req. 1 SA and 1 DA CHASSIS SPECIFICATIONS -Num. Tires 4 DURAVEE 1020 SPECIFICATIONS: -Caster Brakes Adj.Friction Disc -Num. Raking Wheels 10 -Tire Size x 15 -Max. Working Width 20 ft. 4 in. -Trans. Safety Chain Standard -Tran. Width 8 ft. 3 in. -Overall Length 21 ft. 7 in. RAKE WHEEL SPECIFICATIONS -Tractor Req. 30 HP -Diameter 55 in. -Hydraulic Req. 1 SA and 1 DA -Num. Tines 40 -Tine Diameter 7MM OPTIONAL EQUIPMENT -Wheel Mounting Individual -Road Lighting Kit -Flotation Adj. Springs -Single Side Opening Kit -Wheel Arm Pivots Nylon Bushing -8 to 10 Wheel Conversion Kit -Greaseable Pivots Yes -Center Kicker Rake Wheel Kit NOTE: For extreme hillside applications WARRANTY choose the ProCart series wheel rakes. New Holland Standard Warranty Applies Models COMMERCIAL MODEL Weight List Price DURAVEE 817 2,750 LB $10, DURAVEE ,750 LB $11, Page 35 of 152 -HT2Q SEP-16

36 -HT2Q 01 DURAVEE SERIES STANDARD WHEEL RAKES Factory Supplied Options Order Code Description Weight List Price HAYTOOL OPTIONS WHEEL KITS SD_16019 CENTER KICKER WHEEL Center Kicker Wheel Ensures that crop aligned with windrow opening is moved left or right prior to the windrow being formed, to facilitate drying. 256 $1, SD_16064 WHEEL CONVERSION Wheel Conversion Kit Allows field conversion of an 8-wheel rake to a 10-wheel rake. Also allows field conversion of an 18-wheel rake to a 20-wheel rake. 430 $1, HYDRAULIC KITS SD_H5813 SINGLE SIDE OPENING Single Side Opening Hydraulic conversion kit allows either side of the rake to be opened individually. 18 $ LIGHT KIT SD_06032 LIGHTS-LIGHT KIT Light Kit Road Lighting Kit $ LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian No Charge Page 36 of 152 -HT2Q SEP-16

37 -HT2Q 01 DURAVEE SERIES STANDARD WHEEL RAKES Factory Supplied Attachments Order Code Description Weight List Price Center Kicker Wheel 243 LB $1, DuraVee 817 & 1020 Only Wheel Conversion 287 LB $1, DuraVee 817 (8-Wheel) conversion to 1020 (10-Wheel) Single Side Opening 18 LB $ DuraVee 817, 1020, 1833, 2026 ONLY Road Lighting Kit 7 LB $ Page 37 of 152 -HT2Q SEP-16

38 -HT2Q 02 DURAVEE SERIES DELUXE WHEEL RAKE Standard Equipment DURAVEE RAKE SPECIFICATIONS DURAVEE 1631 SPECIFICATIONS -Type "VEE" -Num. Rake Wheels 16 -Delivery Center -Max. Working Width 30 ft. 10 in. -Wheel Lift Hyd. Rack Lift -Frame Type Rigid-Truss -Folding Hyd. Front Folding -Transport Width 8 ft. 3 in. -Width Control Hyd. Pilot Valve -Overall Length 30 ft. -Windrow Control Mechanical -Num. Tires x 15 -Hydraulic Req. 1 SA and 1 DA -Tractor Req. 40 HP CHASSIS SPECIFICATIONS DURAVEE 1833 SPECIFICATIONS -Num. Tires 4 or 6 -Num. Rake Wheels 18 -Caster Brakes Adj. Friction Disc -Max. Working Width 33 ft. 5 in. -Tire Size x 15 -Frame Type Articulated -Trans. Safety Chain Standard -Transport Width 8 ft. 3 in. -SMV Standard -Overall Length 37 ft. 10 in. -Road Lighting Kit Standard -Num. Tires x 15 -Tractor Req. 55 HP RAKE WHEELS -Diameter 55 in. DURAVEE 2036 SPECIFICATIONS -Num. Tines 40 -Num. Rake Wheels 20 -Tine Diameter 7MM -Max. Working Width 36 ft. -Wheel Mounting Individual -Frame Type Articulated -Flotation Adj. Springs -Trans. Width 8 ft., 3 in. -Wheel Arm Pivots Nylon Bushing -Overall Length 37 ft. 10 in. -Greaseable Pivots Yes -Num. Tires x 15 -Tractor Req. 55 HP DURAVEE 1225 SPECIFICATIONS -Num. Rake Wheels 12 -Max. Working Width 25 ft. OPTIONAL EQUIPMENT -Frame Type Rigid -Single Side Opening Kit -Trans. Width 8 ft. 3 in. -12 to 14 Wheel Conversion Kit -Overall Length 24 ft. 6 in. -18 to 20 Wheel Conversion Kit -Num. Tires x 15 -Center Splitter Type Wheel Kit -Tractor Req. 30 HP -Rear Tandem Axle Kit -Hyd. Windrow Control DURAVEE 1428 SPECIFICATIONS -3rd Wheel Kit (DV1225 Only) -Num. Rake Wheels in. Rake Wheel Upgrade -Max. Working Width 28 ft. 6 in. -Frame Type Rigid-Truss NOTE: For extreme hillside applications -Trans.Width 8 ft. 3 in. choose the ProCart series wheel rakes. -Overall Length 30 ft. -Num. Tires x 15 WARRANTY -Tractor Req. 40 HP New Holland Standard Warranty Applies Page 38 of 152 -HT2Q SEP-16

39 -HT2Q 02 DURAVEE SERIES DELUXE WHEEL RAKE Standard Equipment Models COMMERCIAL MODEL Weight List Price DURAVEE ,827 LB $15, DURAVEE ,208 LB $20, DURAVEE ,570 LB $21, DURAVEE ,210 LB $24, DURAVEE ,540 LB $25, Factory Supplied Options Order Code Description Weight List Price WHEEL KITS SD_05043 CONVERSION KIT Conversion Rake Whls 55 in. Required when 14 to 16 wheel conversion kit is ordered. For 55 inch wheels. 1 right hand and 1 left hand wheel included Conversion Rake Whls 60 in. Required when 14 to 16 wheel conversion kit is ordered. For 60 inch wheels. 1 right hand and 1 left hand wheel included. $ $ SD_16019 CENTER KICKER WHEEL Center Kicker Wheel Ensures that crop aligned with windrow opening is moved left or right prior to the windrow being formed, to facilitate drying. 256 $1, SD_16064 WHEEL CONVERSION CONV 14 TO 16 L/R WH Coverts DuraVee 1428 to 16 wheels. Wheels are not included. Must be paired with appropriate package of 55" or 60" raking wheels. $1, Page 39 of 152 -HT2Q SEP-16

40 -HT2Q 02 DURAVEE SERIES DELUXE WHEEL RAKE Wheel Conversion Kit Allows field conversion of an 8-wheel rake to a 10-wheel rake. Also allows field conversion of an 18-wheel rake to a 20-wheel rake. 430 $1, SD_H6222 RAKING WHEELS in. Rake Wheel Upgrade Upgrade to 60 inch raking wheels for 12 wheel, 14 wheel, and 16 wheel machines. 7.5 mm thick tines. 60 inch raking wheels replace standard 55 inch raking wheels. $1, SUPPORT WHEELS SD_ RD WHEEL KIT rd Wheel Kit Includes caster mounts, tires, and yellow transport wheels. Adds a caster wheel to the front of the 12-wheel rake to improve performance in rough fields. 265 $1, SD_16037 REAR TANDEMS Rear Tandems Includes walking beam axles, tires, and yellow transport wheels. Recommended when working in rough fields, particularly pivot irrigation. 312 $1, HYDRAULIC KITS SD_20083 HYD REAR OPENING KIT Rear Hydraulic Opening Kit Replaces mechanical rear opening ratchet adjustment. 115 $1, SD_H5813 SINGLE SIDE OPENING Single Side Opening Hydraulic conversion kit allows either side of the rake to be opened individually. 18 $ LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian No Charge Page 40 of 152 -HT2Q SEP-16

41 -HT2Q 02 DURAVEE SERIES DELUXE WHEEL RAKE Factory Supplied Attachments Order Code Description Weight List Price Ctr Kicker Kit - W/R. Wheels 242 LB $1, DuraVee 1225, 1428, & 1631 Only CENTER KICKER WHEEL 256 LB $1, DuraVee 1833 and 2036 Only CONV KIT 14 TO 16 L/R WHLS 104 LB $1, No wheels included. Must order (55 in. wheels) or (60 in. wheels) to complete Conv Kit Rake Whls 55IN 77 LB $ Set of two 55'' rake wheels (1-RH/1-LH) for two wheel conversion kit CONV KIT RAKE WHLS 60IN NH 95 LB $ Set of two 60'' rake wheels (1-RH/1-LH) for two wheel conversion kit rd Wheel Kit 297 LB $1, DuraVee 1225 ONLY, Standard on DuraVee 1428, 1631, 1833, & Single Side Opening 18 LB $ DuraVee 817, 1020, 1833, 2026 ONLY SINGLE SIDE OPENING 12 LB $ DuraVee 1225, 1428, & 1631 ONLY HYD REAR OPENING KIT 95 LB $1, DuraVee 1225 ONLY (12-wheel) Hyd Rear Opening Kit 104 LB $1, DuraVee 1428 (14-Wheel), & 1631(16-Wheel) ONLY Rear Hyd Wheel 108 LB $1, DuraVee 1833 (18-Wheel) & 2026 (20-Wheel) ONLY Rear Tandems 242 LB $1, DuraVee 1225, 1428, & 1631 ONLY REAR TANDEMS DuraVee 1833 & 2036 ONLY 265 LB $1, Page 41 of 152 -HT2Q SEP-16

42 -HT1Z 01 MODEL H5980 HEAVY-DUTY WHEEL RAKE (Marshfield, WI) Standard Equipment New Holland H5980 heavy-duty wheel ELECTRO-HYDRAULIC CONTROLS rake provides greater reliability and more -Independent RH/LH Rake wheel Lift capacity than traditional wheel rakes. -Independent RH/LH Rake Frame The offset "Y-rake" design turns all of Angle Control the hay for more consistent drying and -Independent RH/LH Rake Width easier pickup. Adjustment H5980 KEY SALES FEATURES TRACTOR REQUIREMENTS -Offset Y-rake design turns all crop -Hydraulic eliminating need for center kicker Num. Valves 1 DA wheel(s). Close Center Required -Twin sliding overhead frame provides Open Center Possible extra high-clearance to rake high -Electrical Req. 12V volume crops without bunching. -Power Req. 65 HP -Mechanical rake wheel tilt adjustment up to ten degrees to produce more fluffy and uniform windrows. H5980 (Std. 17 Rake Wheels) -Individual and gang style raking Wheel -Max. Working Width 30 ft. 3 in. ground pressure adjustments. -Max. Windrow Width 72 in. -The optional front rake wheel -Transport Width 12 ft. 3 in. extension kits adds two additional -Overall length 28 ft. 3 in. raking wheels for a bigger reach. -The optional rear rake wheel H5980 (w/ Opt. Rear Ext. Kit Only) extension kit provides additional 12 in. -Max. Working Width 31 ft. 3 in. reach and maintains rear overlap to -Max. Windrow Width 72 in. ensure everything is turned. -Transport Width 13 ft. 3 in. -Overall length 30 ft. 8 in. H5980 WHEEL RAKE SPECIFICATIONS: -Rake Wheel Dia. 60 in. H5980 (w/ Opt. Front Ext. Kit Only) -Num. Raking wheels 17 -Max. Working Width 33 ft. 3in. Right Side Frame - 8 Wheels -Max. Windrow Width 72 in. Left Side Frame - 9 Wheels -Transport Width 12 ft. 3in. -Num. Tines per wheel 36 -Overall Length 30 ft. 8 in. -Tine Mounting Rubber -Tine Diameter.285 in. H5980 (w/ Opt. Front & Rear Ext. Kits) -Poly Wind Panels Std. -Max. Working Width 34 ft. 3in. -Tapered Roller Bearings Std. -Max. Windrow Width 72 in. -Walking Tandem Axle Std. -Transport Width 13 ft. 3in. -Offset Tires Std. -Overall Length 33 ft. 1 in. -Tire Size 9.5Lx15 -Clevis Hitch Std. WARRANTY -2 5/16 in. Ball Hitch DIA Kit New Holland Standard Warranty Applies -Parking Jack Std. -Power Req. 65 HP Page 42 of 152 -HT1Z SEP-16

43 -HT1Z 01 MODEL H5980 HEAVY-DUTY WHEEL RAKE (Marshfield, WI) Models COMMERCIAL MODEL WHEEL RAKE Weight List Price H Wheel Rake 5,700 LB $38, Factory Supplied Options Order Code Description Weight List Price HAYTOOL OPTIONS RAKING EXTENSIONS SD_H7002 FR RAKING EXTENSIONS Front Raking Extensions Increases the maximum working width by providing two additional right and left raking wheels for a maximum width of 33 ft. 3 in. or 34 ft. 3 in. when used with rear rake wheel extension kit. $2, SD_H7003 RR RAKING EXTENSIONS Rear Raking Extensions Extends the overhead frame by 1-foot for increased width and extends the the right-hand raking frame by one raking wheel and to ensure all the hay is turned when raked. $1, LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian 1 LB No Charge Spanish Manual - NA 1 LB No Charge Page 43 of 152 -HT1Z SEP-16

44 -HT1Z 01 MODEL H5980 HEAVY-DUTY WHEEL RAKE (Marshfield, WI) Factory Supplied Attachments Order Code Description Weight List Price Front Raking Extension Increases the maximum working width by providing two additional right and left raking wheel for a maximum width of 33 ft. 3 in. or 34 ft. 3 in. when used with rear rake wheel extension kit. 492 LB $2, Serial number YBWHR0030 through current production only Rear Raking Extension Extends the overhead frame by 1-foot for increased width and extends the the right-hand raking frame by one raking wheel and to ensure all the hay is turned when raked. 231 LB $1, Serial number: YBWHR0030 through current production only. Page 44 of 152 -HT1Z SEP-16

45 -HT2R 01 H7220/H7320 SIDE-PULL DISCBINE DMC (New Holland, PA) Standard Equipment MODEL H7220 & 7320 ROLL CONDITIONING SYSTEM (H7220) -Hitch Clevis -Roll Design Chevron -Head Tilt Mechanical -Roll Width 90 in. -Head Flotation Adjustable Springs -Roll Diameter 10-3/8 in. -Flotation Geometry Vertical & Lateral -Roll Material Rubber -Impact Hood Liner High Density -Roll Speed 647 rpm Polyethylene -Roll Pressure System Torsion Bar -Tongue Swing Hydraulic -Roll Pressure Adj. Hand Crank -Tires 2, 9.5L 14, 6PR -Roll Gap & Timing Adjustable -Trans. Width 9 ft. 11 in.(3.0m) -Trans. Lighting Standard FLAIL CONDITIONING SYSTEM (H7320) -SMV Symbol Standard -Design LeaningEdge Flail Tines -Safety Chain Standard -Tine Material Cast Steel -Num. Tines 90 DISC CUTTERBAR SPECIFICATIONS -Rotor Width 90 in. -Cutting Width 9 ft. 2 in.(2.8m) -Rotor Speed 1016 rpm -Cutting Height in.(21-81mm) (730 rpm available) -Num. Discs 7 Oval Discs -Intensity Adjustable Hood -Disc Speed 3000 rpm -Hood Liner Replaceable -Crop Lifters Standard -Adjustment Hand Crank -Knives/Disc 2 Reversible -Std. Knives 14 Smooth Edge OPTIONAL EQUIPMENT -Type MowMax Disc -Hydraulic Head Tilt Kit Cutterbar -High Stubble Skid Shoe Kit -Protection ShockPRO System -Textured Hood Liner Kit (H7320 Only -Rock Guard Heavy-Duty Cast Iron -Skid Shoes Hardened Steel TRACTOR REQUIREMENTS -PTO Speed 540 RPM SWATH SPECIFICATIONS -Power 65 PTO hp -Width Range 3-6 ft. ( m) -Hyd. Equipment 1 DA / 1 SA -Windrow Shields Adjustable -Swath Gate/Baffle Adjustable WARRANTY -New Holland Standard Warranty DRIVE SPECIFICATIONS Applies To Base -Primary PTO 80 Constant -Cutterbar Driveline Extended Warranty Velocity (CV) 3-Years -Secondary PTO Slip Clutch Standard Overrunning Clutch Standard **Only for use with tractors having a Type Non CV fully enclosed cab.** Page 45 of 152 -HT2R SEP-16

46 -HT2R 01 H7220/H7320 SIDE-PULL DISCBINE DMC (New Holland, PA) Models COMMERCIAL MODEL CONDITIONER TYPE TONGUE Weight List Price H7220 BTO Rubber on rubber chevron STD TONGUE 4,340 LB $30, H7320 BTO Flail Rotor Conditioner STD TONGUE 4,340 LB $28, Factory Supplied Options Order Code Description Weight List Price COMPLETING PACKAGES COMPLETING PACKAGES SD_50016 HYDRAULIC TILT KIT Hydraulic Header Tilt 25 LB $ FACTORY SUPPLIED OPTIONS MOWER CONDITIONER OPTIONS SD_50047 HIGH STUBBLE KIT High Stubble Kit Cutting height with high stubble kit is 2.25" - 4.5" (58mm - 115mm). Includes 8 skid shoes. SD_H5815 TEXTURED LINER KIT Textured Liner Kit Orderable only with model flail units, provides more aggressive conditioning. 92 LB $ LB $ LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian Manual - NA 1 LB No Charge Spanish Manual - NA 1 LB No Charge Page 46 of 152 -HT2R SEP-16

47 -HT2R 02 H7230/H7330 SIDE-PULL DISCBINE DMC (New Holland, PA) Standard Equipment MODEL H7230 & 7330 ROLL CONDITIONING SYSTEM (H7230) -Standard Tongue Clevis -Roll Design Chevron -Swivel Tongue 2-pt or Drawbar -Roll Width 102 in. -Head Tilt Hydraulic -Roll Diameter 10-3/8 in. -Head Flotation Adjustable Springs -Roll Material Rubber -Flotation Geometry Vertical & Lateral -Roll Speed 635 rpm -Impact Hood Liner High Density -Roll Pressure System Torsion Bar Polyethylene -Roll Pressure Adj. Hand Crank -Tongue Swing Hydraulic -Roll Gap & Timing Adjustable -H7230 Tires 2, 11.5L 15, 6PR -H7330 Tires 2, 9.5L 14, 6PR FLAIL CONDITIONING SYSTEM (H7330) -Trans. Width 11 ft. 3 in.(3.4m) -Design LeaningEdge Flail Tines -Trans. Lighting Standard -Tine Material Cast Steel -SMV Symbol Standard -Num. Tines 100 -Safety Chain Standard -Rotor Width 102 in. -Rotor Speed 1016 rpm DISC CUTTERBAR SPECIFICATIONS (718 rpm available) -Cutting Width 10 ft. 4 in.(3.16m) -Intensity Adjustable Hood -Cutting Height in.(21-81mm) -Hood Liner Replaceable -Num. Discs 8 Oval Discs -Adjustment Hand Crank -Disc Speed 3000 rpm -Crop Lifters Standard OPTIONAL EQUIPMENT -Knives/Disc 2 Reversible -Swivel Hitch Tow Bar Kit -Std. Knives 14 Smooth Edge -High Stubble Skid Shoe Kit -Type MowMax Disc -Textured Hood Liner Kit (H7330 Only) Cutterbar -Protection ShockPRO System STANDARD HITCH REQUIREMENTS -Rock Guard Heavy-Duty Cast Iron -PTO Speed 540 OR 1000 RPM -Skid Shoes Hardened Steel -Power 80 PTO hp -Hyd. Equipment 1 DA / 1 SA SWATH SPECIFICATIONS -Width Range 3-7 ft. ( m) SWIVEL HITCH REQUIREMENTS -Windrow Shields Adjustable -PTO Speed 540 RPM -Swath Gate/Baffle Adjustable -Power 80 PTO hp -Hyd. Equipment 1 DA / 1 SA DRIVE SPECIFICATIONS -Primary PTO WARRANTY Standard Tongue 80 Constant -New Holland Standard Warranty Velocity (CV) Applies To Base Swivel Tongue Std. U-Joint & -Cutterbar Driveline Extended Warranty Swivel Gearbox 3-Years -Secondary PTO Slip Clutch Standard **Only for use with tractors having a Overrunning Clutch Standard fully enclosed cab.** Type Double CV Joint Page 47 of 152 -HT2R SEP-16

48 -HT2R 02 H7230/H7330 SIDE-PULL DISCBINE DMC (New Holland, PA) Models COMMERCIAL MODEL CONDITIONER TYPE TONGUE Weight List Price H7230 BTO Rubber on rubber chevron STD TONGUE 4,340 LB $33, H7230 BTO Rubber on rubber chevron SWIVEL TNG 4,340 LB $34, H7230 BTO Steel on steel chevron STD TONGUE 4,340 LB $33, H7230 BTO Steel on steel chevron SWIVEL TNG 4,340 LB $34, H7330 BTO Flail Rotor Conditioner STD TONGUE 4,340 LB $31, H7330 BTO Flail Rotor Conditioner SWIVEL TNG 4,340 LB $32, Factory Supplied Options Order Code Description Weight List Price COMPLETING PACKAGES COMPLETING PACKAGES SD_41039 HITCH Drawbar Hitch Required choice for Swivel Hitch model only. Attaches to tractor drawbar via hitch extension. Max dimension for Swivel hitch adapter is 3.15 inches (80mm) wide, inches thick (52mm), Cat. II or III drawbar Point Hitch Required choice for Swivel hitch model only. Attaches to tractor lower 3-point hitch links. No Charge No Charge PTO OPTIONS SD_03005 PTO RPM PTO X03005X No PTO For Standard Tongue Units Only. Replaces Std 540 PTO Price credit when neither 540 RPM nor 1000 RPM PTO are ordered with STANDARD TONGUE unit. 45 LB No Charge ($1,254.00) Page 48 of 152 -HT2R SEP-16

49 -HT2R 02 H7230/H7330 SIDE-PULL DISCBINE DMC (New Holland, PA) FACTORY SUPPLIED OPTIONS MOWER CONDITIONER OPTIONS SD_41033 TOW BAR Tow Bar Allows slow-speed towing of a 2-pt. swivel hitch unit by a tractor without 3-pt or drawbar swivel hitch unit by a tractor without drawbar adapter. Includes safety chain. $ SD_50047 HIGH STUBBLE KIT High Stubble Kit Cutting height with high stubble kit is 2.25" - 4.5" (58mm - 115mm). Includes 8 skid shoes. 92 LB $ SD_H5815 TEXTURED LINER KIT Textured Liner Kit Orderable only with model flail units, provides more aggressive conditioning. 84 LB $ LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian Manual - NA 1 LB No Charge Spanish Manual - NA 1 LB No Charge Page 49 of 152 -HT2R SEP-16

50 -HT2K 01 DISCBINE 313 CENTER PIVOT DMC (New Holland, PA) Standard Equipment DB 313 DISC MOWER-CONDITIONER WIDE DRY ROLL CONDITIONING -Swivel Hitch Standard -Roll Design Chevron -Attachment 2-pt or Drawbar -Roll Width 125 in.(3175mm) -Head Tilt Hydraulic -Roll Diameter 10-3/8 in. (264mm) -Head Flotation Adjustable Springs -Roll Material Rubber or Steel -Flotation Geometry Up & Back -Roll Speed 750/640 rpm -Poly Bifold Hoods Standard -Roll Pressure System Torsion Bar -Tongue Swing Hydraulic Center -Roll Pressure Adj. Hand Crank Pivot -Roll Gap & Timing Adjustable -Tires 2, 12.5L 15, 6PR -Trans. Width 13 ft. 4 in.(4.04m) WIDE DRY FLAIL TINE CONDITIONING -Trans. Lighting Standard -Design LeaningEdge Flail Tines -SMV Symbol Standard -Tine Material Cast Steel -Safety Chain Standard -Num. Tines 120 -Rotor Width 125 in.(3175mm) DISC CUTTERBAR SPECIFICATIONS -Rotor Speed 1042 rpm -Cutting Width 13 ft.(4.0m) (752 rpm available) -Cutting Height in.(20-69mm) -Intensity Adjustable Hood -QuickMax Knives Standard -Hood Liner Replaceable -Num. Discs 8 Large Oval Discs -Adjustment Hand Crank -Disc Speed 2250 rpm -Crop Lifters Optional OTHER OPTIONAL EQUIPMENT -Knives/Disc 2 Reversible -Full Complement of Crop Lifters -Std. Knives 14 Smooth Edge -Swivel Hitch Tow Bar Kit -Type MowMax II Disc -Corner Market Kit Cutterbar -Crop Divider Kit -Protection ShockPRO System -BioMass Harvesting Kits -Rock Guard Heavy-Duty Cast Iron -High Stubble Skid Shoe Kit -Skid Shoes Hardened Steel -Textured Hood Liner Kit (Flail Only) SWATH SPECIFICATIONS TRACTOR REQUIREMENTS -Width Range 3-10 ft.( m) -PTO Speed 1000 RPM -Windrow Shields Adjustable -Power 90 PTO hp -Swath Gate/Baffle Adjustable -Hyd. Equipment 1DA / 1 SA -Swath Wedges Standard WARRANTY DRIVE SPECIFICATIONS -New Holland Standard Warranty -Primary PTO Std. U-Joint & Applies To Base Swivel Gearbox -Cutterbar Driveline Extended Warranty -Secondary PTO Std. U-Joint & 3-Years Swivel Gearbox -Slip Clutch Standard -Overrunning Clutch Standard **Only for use with tractors having a fully enclosed cab.** Page 50 of 152 -HT2K SEP-16

51 -HT2K 01 DISCBINE 313 CENTER PIVOT DMC (New Holland, PA) Models COMMERCIAL MODEL CONDITIONER TYPE Weight List Price DB313F Flail Rotor Conditioner 6,420 LB $45, DB313R Rubber on rubber chevron 6,420 LB $47, DB313S Steel on steel chevron 6,420 LB $47, Factory Supplied Options Order Code Description Weight List Price COMPLETING PACKAGES HITCH OPTIONS SD_41030 HITCH Point Swivel Hitch-Installed ASAE Cat. II or III 3-Point Hitch Compatible Drawbar Swivel Hitch-Installed ASAE Cat. II or III Drawbar Compatible Swivel Tongue Less Hitch Allows the use of a 'take-off' hitch from a previous unit that has been replaced by the alternative hitch from Service Parts No Charge No Charge ($1,845.00) HAYTOOL OPTIONS CROP LIFTER SD_C5814 CROP LIFTER SET CROP LIFTER KIT Full complement of crop lifters: Recommend when harvesting ryegrass, triticale and other winter forage crops. $ TEXTURED LINER SD_H5815 TEXTURED LINER KIT Textured Liner Kit For flail units only, provides more aggressive conditioning $ Page 51 of 152 -HT2K SEP-16

52 -HT2K 01 DISCBINE 313 CENTER PIVOT DMC (New Holland, PA) ADJUSTABLE SKID SHOE SD_C5832 SKID SHOE Adjustable Skid Shoes Kit Set of two (2) easily adjustable skid shoes - one for each end of the unit. Cut height range 3/4 inch to 5 3/4 inches $ TOW BAR SD_41033 TOW BAR Tow Bar Allows slow-speed towing of a 2-pt. swivel-hitch unit by a tractor without a 3-pt. Includes safety chain. Also allows slow-speed towing of a drawbar swivel-hitch unit by a tractor without a drawbar adapter. Includes safety chain. $ CROP DIVIDERS SD_H5101 CROP DIVIDERS Crop Dividers Pair of 2 dividers, one for each end of unit. $ CORNER MARKERS SD_50018 CORNER MARKER KIT Corner Marker Kit For better visibility of the corners for operation and transport $ HIGH STUBBLE KIT SD_50047 HIGH STUBBLE KIT High Stubble Kit Set of eight (8) taller skid shoes. Cut height range 3 inches to 5 1/2 inches NOT COMPATIBLE with adjustable skid shoe option $1, PUSH BAR SD_H5811 PUSHBAR DIVIDER Push Bar For Tall Crops For tall, cane-type or biomass crops. Leans crop forward in front of the header $ Page 52 of 152 -HT2K SEP-16

53 -HT2K 01 DISCBINE 313 CENTER PIVOT DMC (New Holland, PA) CANE/BIOMASS KIT SD_H5405 CANE/BIOMASS HARVEST Cane/Biomass Kit Includes windrow shield extensions, (4) extra-high skid shoes, and lift lockout channels. Cut height range 5 inches to 7 3/4 inches. $1, OPERATORS MANUAL SD_47083 OPERATOR'S MANUAL French Canadian Manual - NA No Charge Spanish Manual - NA No Charge Page 53 of 152 -HT2K SEP-16

54 -HT2K 02 DISCBINE 316 CENTER PIVOT DMC (New Holland, PA) Standard Equipment DB 316 DISC MOWER-CONDITIONER WIDE DRY ROLL CONDITIONING -Swivel Hitch Standard -Roll Design Chevron -Attachment 2-pt or Drawbar -Roll Width 125 in.(3175mm) -Head Tilt Hydraulic -Roll Diameter 10-3/8 in. (264mm) -Head Flotation Adjustable Springs -Roll Material Rubber or Steel -Flotation Geometry Up & Back -Roll Speed 750/640 rpm -Poly Bifold Hoods Standard -Roll Pressure System Torsion Bar -Tongue Swing Hydraulic Center -Roll Pressure Adj. Hand Crank Pivot -Roll Gap & Timing Adjustable -Tires 2, 12.5L 15, 6PR -Trans. Width 16 ft. 7 in.(5.05m) WIDE DRY FLAIL TINE CONDITIONING -Trans. Lighting Standard -Design LeaningEdge Flail Tines -SMV Symbol Standard -Tine Material Cast Steel -Safety Chain Standard -Num. Tines 120 -Rotor Width 125 in.(3175mm) DISC CUTTERBAR SPECIFICATIONS -Rotor Speed 1042 rpm -Cutting Width 16 ft.3 in.(4.95m) (752 rpm available) -Cutting Height in.(20-69mm) -Intensity Adjustable Hood -QuickMax Knives Standard -Hood Liner Replaceable -Num. Discs 10 Large Oval Discs -Adjustment Hand Crank -Disc Speed 2250 rpm -Crop Lifters Optional OTHER OPTIONAL EQUIPMENT -Knives/Disc 2 Reversible -Full Complement of Crop Lifters -Std. Knives 14 Smooth Edge -Swivel Hitch Tow Bar Kit -Type MowMax II Disc -Corner Market Kit Cutterbar -Crop Divider Kit -Protection ShockPRO System -BioMass Harvesting Kits -Rock Guard Heavy-Duty Cast Iron -High Stubble Skid Shoe Kit -Skid Shoes Hardened Steel -Textured Hood Liner Kit (Flail Only) SWATH SPECIFICATIONS TRACTOR REQUIREMENTS -Width Range 3-10 ft.( m) -PTO Speed 1000 RPM -Windrow Shields Adjustable -Power 100 PTO hp -Swath Gate/Baffle Adjustable -Hyd. Equipment 1DA / 1 SA -Swath Wedges Standard WARRANTY DRIVE SPECIFICATIONS -New Holland Standard Warranty -Primary PTO Std. U-Joint & Applies To Base Swivel Gearbox -Cutterbar Driveline Extended Warranty -Secondary PTO Std. U-Joint & 3-Years Swivel Gearbox -Slip Clutch Standard -Overrunning Clutch Standard **Only for use with tractors having a fully enclosed cab.** Page 54 of 152 -HT2K SEP-16

55 -HT2K 02 DISCBINE 316 CENTER PIVOT DMC (New Holland, PA) Models COMMERCIAL MODEL CONDITIONER TYPE Weight List Price DB316F Flail Rotor Conditioner 6,845 LB $53, DB316R Rubber on rubber chevron 6,845 LB $53, DB316S Steel on steel chevron 6,845 LB $54, Factory Supplied Options Order Code Description Weight List Price COMPLETING PACKAGES HITCH OPTIONS SD_41030 HITCH Point Swivel Hitch-Installed ASAE Cat. II or III 3-Point Hitch Compatible Drawbar Swivel Hitch-Installed ASAE Cat. II or III Drawbar Compatible Swivel Tongue Less Hitch Allows the use of a 'take-off' hitch from a previous unit that has been replaced by the alternative hitch from Service Parts No Charge No Charge ($1,845.00) HAYTOOL OPTIONS CROP LIFTER SD_C5814 CROP LIFTER SET CROP LIFTER KIT Full complement of crop lifters: Recommend when harvesting ryegrass, triticale and other winter forage crops. $ TEXTURED LINER SD_H5815 TEXTURED LINER KIT Textured Liner Kit For flail units only, provides more aggressive conditioning $ Page 55 of 152 -HT2K SEP-16

56 -HT2K 02 DISCBINE 316 CENTER PIVOT DMC (New Holland, PA) ADJUSTABLE SKID SHOE SD_C5832 SKID SHOE Adjustable Skid Shoes Kit Set of two (2) easily adjustable skid shoes - one for each end of the unit. Cut height range 3/4 inch to 5 3/4 inches $ TOW BAR SD_41033 TOW BAR Tow Bar Allows slow-speed towing of a 2-pt. swivel-hitch unit by a tractor without a 3-pt. Includes safety chain. Also allows slow-speed towing of a drawbar swivel-hitch unit by a tractor without a drawbar adapter. Includes safety chain. $ CROP DIVIDERS SD_H5101 CROP DIVIDERS Crop Dividers Pair of 2 dividers, one for each end of unit. $ CORNER MARKERS SD_50018 CORNER MARKER KIT Corner Marker Kit For better visibility of the corners for operation and transport $ HIGH STUBBLE KIT SD_50047 HIGH STUBBLE KIT High Stubble Kit Set of eight (8) taller skid shoes. Cut height range 3 inches to 5 1/2 inches NOT COMPATIBLE with adjustable skid shoe option $1, PUSH BAR SD_H5811 PUSHBAR DIVIDER Push Bar For Tall Crops For tall, cane-type or biomass crops. Leans crop forward in front of the header $ Page 56 of 152 -HT2K SEP-16

57 -HT2K 02 DISCBINE 316 CENTER PIVOT DMC (New Holland, PA) CANE/BIOMASS KIT SD_H5405 CANE/BIOMASS HARVEST Cane/Biomass Kit Includes windrow shield extensions, (4) extra-high skid shoes, and lift lockout channels. Cut height range 5 inches to 7 3/4 inches. $1, OPERATORS MANUAL SD_47083 OPERATOR'S MANUAL French Canadian Manual - NA No Charge Spanish Manual - NA No Charge Page 57 of 152 -HT2K SEP-16

58 -HT2S 01 MODEL 472/488 HAYBINE MOWER-CONDITIONER (New Holland, PA) Standard Equipment MODEL 472 & 488 RUBBER CHEVRON ROLL CONDITIONING -Hitch Equal Angle -Roll Width -Attachment Drawbar Extension Model in. -Head Tilt Manual Model in. -Head Flotation Adjustable Springs -Roll Diameter -Tongue Swing Manual-Rope Pull Model /4 in. -Tires Model /8 in. Model 472 2,25x Roll Speed Model 488 2,25x Model rpm -Trans. Width Model rpm Model ft. 5 in. -Roll Pressure System Torsion Bar Model ft. 2 in. -Roll Pressure Adj. Hand Crank -Trans. Lighting Standard -Roll Drive Chain Driven -SMV Symbol Standard -Swath Range -Safety Chain Standard Model in. Model in. CUTTERBAR SPECIFICATIONS -Cutting Width OPTIONAL EQUIPMENT Model ft. 3 in. -Hydraulic Lift Kit (Req. 1 SA) Model ft. 3 in. -Cutting Height in. TRACTOR REQUIREMENTS -Std. Knives Over-serrated -PTO Speed 540 RPM -Hold Downs Adjustable -Guards Standard Type REEL SPECIFICATIONS -Num. Tine Bars 4 -Speed Adj. Variable sheave -Position Adjustable WARRANTY -Drive Belt & Chain New Holland Standard Warranty Applies Models COMMERCIAL MODEL KNIFE Weight List Price 472MC BTO STD GUARD 2,460 LB $19, MC BTO STUB GUARD 2,460 LB $20, MC BTO STD GUARD 3,040 LB $21, MC BTO STUB GUARD 3,040 LB $21, Page 58 of 152 -HT2S SEP-16

59 -HT2S 01 MODEL 472/488 HAYBINE MOWER-CONDITIONER (New Holland, PA) Factory Supplied Options Order Code Description Weight List Price FACTORY SUPPLIED OPTIONS HYDRAULIC KITS SD_20096 HYDRAULIC LIFT KIT Hyd Lift Kit Includes single-acting cylinder and single hydraulic hose. 22 LB $ LANGUAGE KITS SD_47083 OPERATOR'S MANUAL French Canadian 1 LB No Charge Spanish Manual - NA 1 LB No Charge Page 59 of 152 -HT2S SEP-16

60 -HT2U 01 H7150 PIVOT TONGUE SMC - TRAIL FRAME Standard Equipment **HS SERIES HAYBINE MOWER- HS - REEL SPECIFICATIONS CONDITIONER HEADS ARE SOLD -Num. Tine Bars 5 - Segmented SEPARATELY; MUST ORDER HS 14, 16, -Tine Type Full-Flex OR 18 SMC HEAD TO COMPLETE THE -Speed Adj. Variable sheave H7150 TRAIL FRAME.** -Position Adjustable -Drive Belt & Chain **HS SERIES SPECIFICATIONS PROVIDED ARE FOR CONVENIENCE AND HS - CONDITIONING SPECIFICATIONS ARE NOT INCLUDED WITH THE BASE** -Roll Design Rubber Chevron -Roll Width 102 in. Model H7150 TRAIL FRAME -Roll Diameter 10 3/8 in. -Drive Tongue Mounted -Roll Speed 717 rpm Drive Pump -Roll Pressure System Torsion Bar -Attachment Drawbar Extension -Roll Pressure Adj. Hand Crank -Head Tilt Hydraulic -Roll Drive Gearbox & Shafts -Head Flotation Adjustable Springs -Swath Range in. -Tongue Swing Center-Pivot, Hydraulic HS - TRANSPORT WIDTH -Tires 2,31x PR -HS 14 head 16 ft. 3 in. -Trans. Lighting Standard -HS 16 head 18 ft. 3 in. -SMV Symbol Standard -HS 18 Head 20 ft. 3 in. -Safety Chain Standard H TRACTOR REQUIREMENTS HS - CUTTERBAR SPECIFICATIONS -PTO Speed 1000 RPM -Cutting Width -Power Req. 70 hp HS 14 Head 14 ft. 3 in. -Hydraulic Req. 1 SA / 1 DA HS 16 Head 16 ft. 3 in. HS 18 Head 18 ft. 3 in. -Cutting Height in. -Drive Dual Wobble Drives WARRANTY -Std. Knives Over-serrated New Holland Standard Warranty Applies -Hold Downs Adjustable -Guards Standard Type *Not for sale in Quebec* Models COMMERCIAL MODEL MODEL Weight List Price H7150 BTO H7150 SMC 3,050 LB $19, Page 60 of 152 -HT2U SEP-16

61 -HT2U 01 H7150 PIVOT TONGUE SMC - TRAIL FRAME Factory Supplied Options Order Code Description Weight List Price SD_MD MODEL H7150 H7150 SMC No Charge SD_41030 HITCH Tongue 14/16 ft. No Charge Tongue 18 ft. $1, SD_H5801 COMPLETING PACKAGES Completing Group 14 ft. No Charge Completing Group 16/18 ft. No Charge Page 61 of 152 -HT2U SEP-16

62 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) Standard Equipment # -MY2017 PRODUCT CHANGES CHASSIS & REAR AXLE # -Rear axle 3 caster post swivels ENGINE maintain chassis height with nearly -Engine MFG FPT/New Holland zero rear height change and heavy- -Emissions Level Tier 4B duty rotational dampers. -Rated Power 150 hp rated* -Independent rear axle suspension -Displacement 274 cu. In. (4.5 L) # -Hay Only - Heavy-duty 120 in. -Num. Cylinders 4 adjustable rear axle with forked arm -Aspiration Turbocharged support and 14L x PR rear -Pre-cleaning Top Spin ** tires -Intercooling Air-to-Air # -Draper Ready - high clearance 135 in. -Fuel System adjustable rear with forked arm -High-pressure common rail support and 14L x PR rear -Electronic fuel injection tires # -Optional cast single arm support with * Manufacturer's rating per ECE R120 / 16.5L x 16.1 RP rear tires (Standard ISO on Prairie Special Configuration) ** TOPSPIN is a registered trademark of the Donaldson Company, Inc. DRIVELINE -Two speed range hydrostatic drive EMISSIONS SYSTEM -Apx. top speed of 18 MPH -EcoBlue HI-eSCR high-efficiency -HD double reduction planetary Selective Catalytic Reduction with final drives engine exhaust muffler / SCR -Spring applied, hydraulically released park brake (console switch controlled) COOLING SYSTEM #STEERING SYSTEM -High-efficiency, multi-layer cooling psi hydraulic steering system -High-capacity rotary screen cleaning with dedicated pump and load system. reactive steering provides operator # -Chaff wiper kit feedback and optimized straight line -Vertical opening rotary air screen tracking. ELECTRICAL SYSTEM HEAD DRIVE PUMP -Voltage 12-Volt -Hay Only - Fixed displacement 29 GPM -Alternator 150 amp Head Drive Pump -Battery CCA 925 CCA -Battery Type Low maintenance -Draper Ready - Variable displacement -Num. Batteries 1 twin 40 GPM head drive pumps -Dedicated knife drive (High PSI) FUEL/DEF CAPACITIES -Dedicated canvas & reel drive -Diesel Fuel 120-gallon (454 L) (Low PSI) -DEF Fluid 19-gallon (72 L) HEAD ATTACHMENT -Hydraulic poppet couplers for head drive motor attachment Page 62 of 152 -HT2W SEP-16

63 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) Standard Equipment -Hydraulic head flotation -Air-conditioner and heater with -Hydraulic Head Tilt manual temperature controls -In-cab & Remote control switches -Dual cab air filtration system: # -Electronic tilt indicator displayed -(1) External fresh air filter on 4-line display and Intelliview IV -(1) In-cab air recirculation filter equipped windrowers. -Cab interior lighting package -Tilt indicator on the tilt cylinder -(1) Center dome light -4" stroke head tilt cylinder -(1) Right-hand console light -Entertainment & communications -Single lever head transport lock -AM/FM/weather band Radio with system antenna and two speakers. -Standard head latch system -Auxiliary input socket for MP3 player, -Head lift cylinders satellite radio or portable CD player -Hay Only - Diameter 2.5 inch -(2) Additional radio port locations -Draper Ready - Diameter 2.75 inch with DIN mounting slots -Business band antenna ready WINDROW SHIELDS -Front windshield wiper/washer -Manual adjust hay windrow shields -(2) External mount rear view mirrors (Non-draper Machines Only) (mechanical adjust) -Fixed windrow shields -(1) In-cab rearview mirror (Draper Machines Only) -(1) 12-volt auxiliary power outlet -Electronic service tool diagnostic WEIGHTING AND BALLASTING port -Less chassis ballast; order ballast as appropriate for attached head(s) ENGINE SHIELDS -Sheet molded compound side shields STANDARD CAB -Easy-open gas strut supported -Comfort Ride cab suspension and air-ride rear axle suspension MULTI-FUNCTION HANDLE -Curved, tinted glass with left-hand -CommandGrip MFH with low-effort entry door forward-neutral-reverse ground -Adjustable tilt/telescopic steering speed control with back lighting. column # -Haying MFH: Short stock without -Fore/Aft adjustable console with cup palm rest and hay specific operation holder, lighter & ashtray decal affixed to right cab window. -Deluxe fabric-covered seating # -Draper MFH: Traditional tall stalk -Air-suspension design with palm rest, and hay -Fore/aft isolator specific operational decal decal -Lumbar adjustment affixed to right cab window. -Ride dampener adjustment -Retractable seat belt -MFH Controls for: -Operator s presence system -Performance monitor display -Instructor's seat with seat belt selection -Front windshield wiper/washer -Head raise/lower -Climate systems -Head tilt control Page 63 of 152 -HT2W SEP-16

64 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) Standard Equipment -Auto guidance engagement TRANSPORT LIGHTING -Reel speed (draper head) -(2) Halogen, cab roof-mounted -Reel raise/lower (draper head) transport lights -Reel fore/aft (draper head) -(2) Combination rear tail light/brake -Head cut height (draper head) lights -Head lateral tilt (draper head) -(2) Combination turn signal/flashing -Return to cut (draper head) hazard lights RIGHT-HAND CONSOLE CONTROLS WORK LIGHTING -Engine speed -(4) Halogen, Cab Roof-mounted Work -Head engagement Lights -Head power reverser -(2) Halogen, rear work lights -Head flotation adjustment -(2) Halogen, stubble lights -Park brake control -Time delay cab exit light -Cold start (when equipped) -12 volt, service light receptacle MONITORS AND DISPLAYS WARRANTY -Console mounted, adjustable displays New Holland Standard Warranty & monitors Applies -Standard Monitor: 4-Line, TS-Ready for Auto Guidance Ready units -Optional: 4-Line display for Non-Auto Guidance Ready, OR IntelliView IV, 10 inch color touch screen display -Monitored systems -Engine oil pressure -Engine coolant temperature -Engine rpm -Battery voltage -Ground speed -Diesel fuel & DEF fluid levels -Engine/head hours -Hydrostatic transmission charge oil pressure TECHNOLOGY FEATURES -PLM Precision Land Management IntelliSteer auto guidance ready ENGINE SHUTDOWN PROTECTION: HIGH VALUE OPTIONS & PACKAGES -Automatic engine shutdown -Deluxe cab upgrade Includes -Low engine oil pressure -Automatic temperature controls -Engine coolant overheat -Deluxe satellite radio w/ bluetooth -Low hydrostatic charge oil pressure connectivity -Two (2) additional radio speakers Page 64 of 152 -HT2W SEP-16

65 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) Standard Equipment (4 radio speakers in total) -AutoGuide Omnistar -Front/rear sun shades -Factory IntelliSteer Auto guidance -Additional noise suppression Complete -OmniStar correction signal unlocked -Prairie Special draper configuration (+/- 3 to 5 inch accuracy) includes the following options: -IntelliView IV color touch screen -Auto Guidance Ready with 4-line display display/ts Ready -Navigation Controller III -Deluxe cab package -New Holland 372 GNSS Receiver * -Extra wide 135 inch adjustable rear draper axle -AutoGuide WAAS -Cold weather package -Factory IntelliSteer Auto Guidance -600/65R28 R1W drive tires Complete -High clearance single arm -WAAS Correction signal (+/- 6 to 8 tail wheel with 16.5L tires inch accuracy) -Fixed deflector shields (Draper) -IntelliView IV color touch screen -Head quick latch (Draper) display -Prairie Special logo decal -Navigation Controller III -New Holland 372 GNSS Receiver -Speedrower 160 Hay -Sickle head adaptor kit -Auto Guidance Ready with 4-line display/ts Ready -Deluxe cab package -Cold weather package -21L x PR R4 drive tires -Standard clearance forked arm tail wheel with 14Lx16.1 tires -Manual deflector shields (Hay) -Header quick latch (Hay) -Std. road speed without power Down Page 65 of 152 -HT2W SEP-16

66 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) Models COMMERCIAL MODEL ENGINE POWER Weight List Price SPEEDROWER_ HP 14,000 LB $122, Factory Supplied Options Order Code Description Weight List Price HAYTOOLS TIRES AND WHEELS DRIVE TIRES SD_16066 WHEELS AND TIRES No Front Tires/Wheels No Charge x 26 12PR R4 $4, /80R R3 $5, x R R1 $5, L x 28 14PR R4 $5, /65R R1W $6, /70R R3 $7, REAR TIRES SD_H6202 REAR TIRE - WHEEL SUPPORT Forked/14L w/damper Standard-Clearance, 3 forked arm caster assemblies with heavy-duty rotational dampers and 14L x 16.1 tires & wheels maintain chassis height with near zero rear height change when reversing Single/16.5L w/damper High-Clearance, 3 single arm caster assemblies and heavy-duty rotational dampers with 16.5L x 16.1 tires maintain chassis height with near zero rear height change when reversing. No Charge $1, Page 66 of 152 -HT2W SEP-16

67 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) FACTORY SUPPLIED OPTIONS LIGHT KITS SD_06037 REAR LIGHTS Deluxe LED Rear Light Package Upgrade provides two (2) forward-facing LED stubble lights and two (2) rear-facing LED stubble lights. $1, SD_06075 FRONT LIGHTS Deluxe LED Front Light Package Upgrade provides two (2) forward-facing halogen road transport lights and four (4) high-intensity LED field lights. $1, ADAPTER PACKAGES SD_H5807 DRAPER HEADER ADAPTER Draper Ready Includes single and double swath delivery capabilities, tandem EDC header drive pumps, lift arm position sensors, fixed position crop deflectors and header quick latch system. $9, For Hay operation order windrow forming shield from the DIA section part # REQUIRED for Durabine disc head operation Order Hydraulic Cross over kit option with new disc headers # or source kit through NH Parts for heads already in service(pn ). (Speedrower 220/260 Draper Ready units are only available with 600, 580, & 21L size front drive tires) SD_H6203 HEADER Q-A SYSTEM Header Quick Latch-Non Draper Lever operated quick release system for header attachment locks Header Quick Latch - Draper Lever operated quick release system for header attachment locks. $ $ ENGINE GROUP SD_02024 COLD WEATHER PKG Cold Weather Package $ Page 67 of 152 -HT2W SEP-16

68 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) TRANSMISSION GROUP SD_N6424 SPEED OPTION Std Road Speed w/o Power Down Two-speed hydrostatic drive, WITHOUT header lift arm power down. TOP SPEED APPROXIMATELY 18 MPH Std Rd Speed w/power Down ND Two-speed hydrostatic drive, WITH header lift arm power down. TOP SPEED APPROXIMATELY 18 MPH - NON DRAPER ONLY Std Rd Speed w/pdown Draper Two-speed hydrostatic drive, WITH header lift arm power down. TOP SPEED APPROXIMATELY 18 MPH - DRAPER ONLY High Rd Speed w/power Down ND Three-speed hydrostatic drive, WITH header lift arm power down. TOP SPEED APPROXIMATELY 24 MPH - NON DRAPER ONLY High Road Speed w/pdown Draper Three-speed hydrostatic drive, WITH header lift arm power down. TOP SPEED APPROXIMATELY 24 MPH - DRAPER ONLY No Charge $ $ $2, $2, CAB GROUP SD_05009 CAB Deluxe Cab Upgrade Deluxe Cab Upgrade includes front and rear sunscreens, automatic temperature controls, additional integrated sound suppression materials, four speakers, and Bluetooth/Satellite/CD/USB Radio with auxiliary input jack. $3, SD_05072 MIRROR Deluxe Mirrors Electrically adjustable mirrors from headliner mounted switch. $ SD_21014 CAMERAS Rear Camera Kit REQUIRES Intelliview IV or 4-line Display with T/S Ready Option where display is moved from another vehicle. Kit contains one (1) rear-facing camera and harness to connect to Intelliview IV display only. System capacity of up to three (3) cameras, additional cameras sold separately. $ Page 68 of 152 -HT2W SEP-16

69 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) SD_25003 CAB DISPLAY MONITOR Line Display, T-S Ready Fixed top-line with Engine RPM & Ground Speed. Bottom three (3) lines are customizable to operator preference. REQUIRED with Auto Guidance Ready Configurations; also provides mounting bracket and wiring harness to connect IntelliView IV display moved from another vehicle into the windrower Large Color Touch Screen Disp. Factory installed and tested IntelliView IV 10-inch color touch -screen display with factory integrated vehicle controls and autoguidance software. REQUIRED with Auto Guidance Complete Configurations Line Display Fixed top-line with Engine RPM & Ground Speed. Bottom three (3) lines are customizable to operator preference. NON-Auto Guidance Ready Configurations ONLY. No Charge $4, ($220.00) SD_25010 DISPLAY Cab A-Pillar Display NOT COMPATIBLE with IntelliView IV touch-screen display, provides additional warning lights and gauges to complement 4-line display equipped windrowers. $ SD_N6393 SEATS Leather Seats Operator s seat with air-suspension, leather-covered with comfort heating and folding leather covered instructor s seat. $1, HYDRAULICS GROUP SD_09002 AUX HYD PUMP AND CONTROL VALVE Gear Pump and Control Valve DRAPER READY UNITS ONLY! REQUIRED when Hydraulic Reel Drive Kit # is installed on HS series headers Gear Pump/Cntl Valve NonDraper NON DRAPER READY UNITS ONLY! REQUIRED when Hydraulic Reel Drive Kit # is installed on HS series headers. $1, $1, Page 69 of 152 -HT2W SEP-16

70 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) WEIGHT GROUP SD_H5407 TRANSPORT BALLAST BOX Transport Ballast Box Provides front ballast REQUIRED when transporting/driving a windrower without a head. Customizable ballast box matches the weight of removed head for proper ballasting. Dealer assembly required of bolt-together ballast box and the addition of specific concrete amounts. See ballast chart for required concrete amounts. NOT COMPATIBLE WITH 4-CY NON-DRAPER $3, SD_H5408 RR BALLAST HANGAR KI Rear Ballast Hangar Kit Rear ballast hanger provides a rear weight bracket for use with 100 pound suitcase weights PN: when rear ballast recommendations exceed the ballast box capacity. 175 LB $1, REQUIRED: Duraswath 436HB and 440HB draper heads SD_T4980 BALLAST PACKAGE SEE BALLASTING CHART PG. XX lbs. - Ballast Kit SR160-4CY Draper & Haybine HS18 Header SR220-6CY L-HP, Durabine 416, & Duramerger 419 SR260-6CY H-HP & Durabine lbs. - Ballast Kit SR160-4CY Non-Draper & Haybine HS16 Header SR220-6CY L-HP & Durabine 416 SR220-6CY L-HP & DuraSwath 425HB SR260-6CY H-HP, DuraMerger 419, & Durabine 419 Header lbs. - Ballast Kit SR160-4CY Non-Draper & Haybine HS18 Header SR160-4CY Draper, DuraSwath 425HB SR220-6CY L-HP, DuraSwath 425HB SR260-6CY H-HP & Durabine lbs. - Ballast Kit -Not recommended for Tier 4b Speedrower Models lbs. - Ballast Kit SR260-6CY H-HP Draper & Duraswath 430HB Header lbs. - Ballast Kit SR160-4CY Draper & Duraswath 430HB Header SR220-6CY L-HP Draper & Duraswath 430HB Header 200 LB $ LB $ LB $ LB $ LB $1, LB $1, Page 70 of 152 -HT2W SEP-16

71 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) lbs. - Ballast Kit -Duraswath 436HB and 440HB Draper Headers require maximum ballast capacity and additional Rear Ballast Hanger Wholegoods Kit # (175 lbs.) and additional suitcase weights PN (100 lbs. each) sourced from CNH Industrial Parts & Service. XT4980X Standard No Ballast Package SR160-4CY Non-Draper & Haybine HS14 Header SR160-4CY Draper & Haybine HS14, HS16, HS18 Heads SR220-6CY L-HP & Haybine HS16 and HS18 Heads SR260-6CY H-HP & Haybine HS16 & HS18 Heads SR260-6CY H-HP, DuraMerger 419, & Durabine 416 Header 1600 LB $1, LB No Charge AUTOGUIDANCE SD_27047 AUTOGUIDANCE AutoGuidance Ready INCLUDED IN BASE: 1-All Cab and Chassis wiring, including wiring connection to IntelliView IV touch screen display 2-Electrohydraulic auto-guidance steering valve 3-Mounting provisions for Navigation Controller & GPS 372 Receiver No Charge TO COMPLETE FACTORY EQUIPPED AUTO GUIDANCE ORDER: 1- IntelliView IV Large Color Touch Screen Display 2- GPS Receiver (WAAS or OmniSTAR Accuracy) 3- Navigation Controller II No AutoGuidance Ready ($4,343.00) SD_27060 GPS RECEIVER X27060X No GPS Receiver No Charge GPS 372 Receiver - WAAS $3, Factory Installed - Narrow / Wide Band NH372 Receiver WAAS Accuracy GPS 372 Receiver - OMNISTAR Factory Installed - Narrow / Wide Band NH372 Receiver OmniSTAR Accuracy Unlock $5, SD_27061 NAV CONTROLLER X27061X No NAV Controller No Charge NAV Controller $5, Factory Installed Auto Guidance Navigation III Controller Page 71 of 152 -HT2W SEP-16

72 -HT2W 01 SPEEDROWER 160 SP WINDROWER (Grand Island, NE) OTHER SD_H5409 TELEMATICS KIT Telematics Kit PLM CONNECT Factory supplied/dealer Installed option kit REQUIRES Intelliview IV Display, annual PLM Connect subscription, and dealer setup of customer access to PLM CONNECT customer dashboard site. $1, Contact CNH Industrial Parts & Service for pricing and full list of available subscriptions, PLM Connect service level information, and cellular network coverage. LANGUAGE KITS SD_47083 OPERATOR'S MANUAL English Lang Manual No Charge French Canadian No Charge Spanish Manual - NA No Charge X47083X No Additional Operators Manual No Charge FIELD INSTALLED HEADER COMPLETING PACKAGES FOR SHIPMENT WITH BASE UNIT ONLY SD_05143 REMOTE WINDROW SHIELD CONTROL Remote Windrow Shield Control Provides in cab electrical adjustment of swath forming shields. (CANNOT be used with fixed shields on draper-ready units.) $1, SD_20107 HYDRAULIC REEL DRIVE Hydraulic Reel Drive Kit FOR USE WITH HS SERIES SMC HEADS ONLY: Also requires engine mounted auxiliary hydraulic pump with control valve (Draper or Non-draper Configurations) and HS header reel drive DIA# installed on head. $ SD_45036 SICKLE HEADER ADAPT Sickle Header Adaptor Kit REQUIRED FOR HS SICKLE HEAD OPERATION Includes header drive motor and hoses with poppet style quick couplers. $1, Page 72 of 152 -HT2W SEP-16

73 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) Standard Equipment # -MY2017 PRODUCT CHANGES CHASSIS & REAR AXLE # -Rear axle 3 caster post swivels ENGINE maintain chassis height with nearly -Engine MFG FPT/New Holland zero rear height change and heavy- -Emissions Level Tier 4B duty rotational dampers. -Rated Power 210 hp rated* -Independent rear axle suspension -Displacement 411 cu. In. (6.7 L) # -Hay Only - Heavy-duty 120 in. -Num. Cylinders 6 adjustable rear axle with forked arm -Aspiration Turbocharged support and 14L x PR rear -Pre-cleaning Top Spin ** tires -Intercooling Air-to-Air # -Draper Ready - high clearance 135 in. -Fuel System adjustable rear with forked arm -High-pressure common rail support and 14L x PR rear -Electronic fuel injection tires # -Optional cast single arm support with * Manufacturer's rating per ECE R120 / 16.5L x 16.1 RP rear tires (Standard ISO on Prairie Special Configuration) ** TOPSPIN is a registered trademark of the Donaldson Company, Inc. DRIVELINE -Two speed range hydrostatic drive EMISSIONS SYSTEM -Apx. top speed of 18 MPH -EcoBlue HI-eSCR high-efficiency -HD double reduction planetary Selective Catalytic Reduction with final drives engine exhaust muffler / SCR -Spring applied, hydraulically released park brake (console switch controlled) COOLING SYSTEM -High-efficiency, multi-layer cooling # STEERING SYSTEM -High-capacity rotary screen cleaning psi hydraulic steering system system. with dedicated pump and load # -Chaff wiper kit reactive steering provides operator -Vertical opening rotary air screen feedback and optimized straight line tracking. ELECTRICAL SYSTEM -Voltage 12-Volt HEAD DRIVE -Alternator 150 amp -Hay Only - Variable displacement 80 -Battery CCA 650 CCA GPM head drive pump -Battery Type Low maintenance -Advanced power management -Num. Batteries 2 system for Durabine disc heads -Draper Ready - Variable displacement FUEL/DEF CAPACITIES twin 40 GPM head drive pumps -Diesel Fuel 120-gallon (454 L) -Dedicated knife drive (High PSI) -DEF Fluid 19-gallon (72 L) -Dedicated canvas & reel drive (Low PSI) Page 73 of 152 -HT2W SEP-16

74 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) Standard Equipment HEAD ATTACHMENT -Lumbar adjustment -Variable speed hydrostatic head -Ride dampener adjustment drive, less head drive motor -Retractable seat belt -Hydraulic poppet couplers for head -Operator s Presence System drive motor attachment for Draper -Instructor's seat with seat belt Ready units only. -Front windshield wiper/washer -Threaded fittings to hard plumb Disc -Climate systems Heads for head drive motor -Air-conditioner and heater with Attachment (Hay units only) manual temperature controls -Independent RH/LH hydraulic head -Dual cab air filtration system: flotation -(1) External fresh air filter -Hydraulic head tilt -(1) In-cab air recirculation filter -In-cab & remote control switches -Cab interior lighting package # -Electronic tilt indicator displayed -(1) Center dome light on 4-line display and Intelliview IV -(1) Right-hand console light equipped windrowers. -Entertainment & communications -Tilt indicator on the tilt cylinder -AM/FM/weather band Radio with -8" stroke head tilt cylinder antenna and two speakers. -Single lever head transport lock -Auxiliary input socket for MP3 player, system satellite radio or portable CD player -Standard head latch system -(2) Additional radio port locations -Large diameter (2.75") head lift with DIN mounting slots cylinders -Business band antenna ready -Front windshield wiper/washer WINDROW SHIELDS -(2) External mount rear view mirrors -Manual adjust hay windrow shields (mechanical adjust) (Non-draper Machines Only) -(1) In-cab rearview mirror -Fixed windrow shields -(2) 12-volt auxiliary power outlets (Draper Machines Only) -Electronic Service Tool diagnostic WEIGHTING AND BALLASTING port -Less chassis ballast; order ballast as appropriate for attached head(s) ENGINE SHIELDS -Sheet molded compound side shields STANDARD CAB -Easy-open gas strut supported -Comfort Ride cab suspension and air-ride rear axle suspension MULTI-FUNCTION HANDLE -Curved, tinted glass with left-hand -CommandGrip MFH with low-effort entry door forward-neutral-reverse ground -Adjustable tilt/telescopic steering speed control with back lighting. column # -Haying MFH: Short stock without -Fore/Aft adjustable console with cup palm rest and hay specific operation holder, lighter & ashtray decal affixed to right cab window. -Deluxe fabric-covered seating # -Draper MFH: Traditional tall stalk -Air-suspension design with palm rest, and hay -Fore/aft isolator specific operational decal decal Page 74 of 152 -HT2W SEP-16

75 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) Standard Equipment affixed to right cab window. TECHNOLOGY FEATURES -MFH Controls for: -Advanced Power Management System -Performance monitor display -RoadCruise Transport mode selection -PLM Precision Land Management -Head raise/lower IntelliSteer auto guidance ready -Head tilt control -Auto guidance engagement ENGINE SHUTDOWN PROTECTION: -Reel speed (draper head) -Automatic engine shutdown -Reel raise/lower (draper head) -Low engine oil pressure -Reel fore/aft (draper head) -Engine coolant overheat -Head cut height (draper head) -Low hydrostatic charge oil pressure -Head lateral tilt (draper head) -Return to cut (draper head) TRANSPORT LIGHTING -(2) Halogen, cab roof-mounted RIGHT-HAND CONSOLE CONTROLS transport lights -Engine speed -(2) Combination rear tail light/brake -Head engagement lights -Head power reverser -(2) Combination turn signal/flashing -Head flotation adjustment hazard lights -Park brake control -Cold start (when equipped) WORK LIGHTING -DuraMerger attachment control -(4) Halogen, cab roof-mounted work (when equipped) lights -(2) Halogen, rear work lights MONITORS AND DISPLAYS -(2) Halogen, stubble lights -Console mounted, adjustable displays -Time delay cab exit light & monitors -12 volt, service light receptacle -Standard monitor: 4-Line, TS-Ready for Auto Guidance Ready units WARRANTY -Optional: 4-Line display for Non-Auto New Holland Standard Warranty Guidance Ready, OR IntelliView IV, Applies 10 inch color touch screen display -Monitored systems -Engine oil pressure -Engine coolant temperature -Engine rpm -Battery voltage -Ground speed -Diesel fuel & DEF fluid levels -Engine/head hours -Hydrostatic transmission charge oil pressure Page 75 of 152 -HT2W SEP-16

76 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) Standard Equipment HIGH VALUE OPTIONS & PACKAGES -AutoGuide Omnistar -Deluxe cab upgrade includes -Factory IntelliSteer auto guidance -Automatic temperature controls complete -Deluxe satellite radio w/ bluetooth -OmniStar correction signal unlocked connectivity (+/- 3 to 5 inch accuracy) -Two (2) additional radio speakers -IntelliView IV color touch screen (4 radio speakers in total) display -Front/rear sun shades -Navigation Controller III -Additional noise suppression -New Holland 372 GNSS Receiver -Prairie Special draper configuration includes the following options: -Auto Guidance Ready with 4-line -AutoGuide WAAS display/ts Ready -Factory IntelliSteer auto guidance -Deluxe cab package complete -Cold weather package -WAAS correction signal (+/- 6 to 8-600/65R28 R1W drive tires inch accuracy) -High clearance single arm -IntelliView IV color touch screen tail wheel with 16.5L tires display -Fixed deflector shields (Draper) -Navigation Controller III -Head quick latch (Draper) -New Holland 372 GNSS Receiver -Prairie Special logo decal -Speedrower 220 Hay -Auto Guidance Ready with 4-line display/ts Ready -Deluxe cab package -Deluxe mirrors -Cold weather package -21L x PR R4 drive tires -High clearance single arm tail wheel with 16.5L tires -Poppet Style Couplers for disc heads -Manual deflector shields (Hay) -Header quick latch (Hay) -High road speed with power down Page 76 of 152 -HT2W SEP-16

77 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) Models COMMERCIAL MODEL ENGINE POWER Weight List Price SPEEDROWER_ HP 14,000 LB $140, Factory Supplied Options Order Code Description Weight List Price HAYTOOLS TIRES AND WHEELS DRIVE TIRES SD_16066 WHEELS AND TIRES No Front Tires/Wheels No Charge x 26 12PR R4 $4, /80R R3 $5, x R R1 $5, L x 28 14PR R4 $5, /65R R1W $6, /70R R3 $7, REAR TIRES SD_H6202 REAR TIRE - WHEEL SUPPORT Forked/14L w/damper Standard-Clearance, 3 forked arm caster assemblies with heavy-duty rotational dampers and 14L x 16.1 tires & wheels maintain chassis height with near zero rear height change when reversing Single/16.5L w/damper High-Clearance, 3 single arm caster assemblies and heavy-duty rotational dampers with 16.5L x 16.1 tires maintain chassis height with near zero rear height change when reversing. No Charge $1, Page 77 of 152 -HT2W SEP-16

78 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) FACTORY SUPPLIED OPTIONS LIGHT KITS SD_06037 REAR LIGHTS Deluxe LED Rear Light Package Upgrade provides two (2) forward-facing LED stubble lights and two (2) rear-facing LED stubble lights. $1, SD_06075 FRONT LIGHTS Deluxe LED Front Light Package Upgrade provides two (2) forward-facing halogen road transport lights and four (4) high-intensity LED field lights. $1, ADAPTER PACKAGES SD_H5807 DRAPER HEADER ADAPTER Draper Ready Includes single and double swath delivery capabilities, tandem EDC header drive pumps, lift arm position sensors, fixed position crop deflectors and header quick latch system. $9, For Hay operation order windrow forming shield from the DIA section part # REQUIRED for Durabine disc head operation Order Hydraulic Cross over kit option with new disc headers # or source kit through NH Parts for heads already in service(pn ). (Speedrower 220/260 Draper Ready units are only available with 600, 580, & 21L size front drive tires) SD_H6203 HEADER Q-A SYSTEM Header Quick Latch-Non Draper Lever operated quick release system for header attachment locks Header Quick Latch - Draper Lever operated quick release system for header attachment locks. $ $ ENGINE GROUP SD_02024 COLD WEATHER PKG Cold Weather Package $ Page 78 of 152 -HT2W SEP-16

79 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) TRANSMISSION GROUP SD_N6424 SPEED OPTION Std Road Speed w/o Power Down Two-speed hydrostatic drive, WITHOUT header lift arm power down. TOP SPEED APPROXIMATELY 18 MPH Std Road Speed with Power Down Two-speed hydrostatic drive, WITH header lift arm power down. TOP SPEED APPROXIMATELY 18 MPH High Road Speed w/power Dn Three-speed hydrostatic drive, WITH header lift arm power down. TOP SPEED APPROXIMATELY 24 MPH No Charge $ $2, CAB GROUP SD_05009 CAB Deluxe Cab Upgrade Deluxe Cab Upgrade includes front and rear sunscreens, automatic temperature controls, additional integrated sound suppression materials, four speakers, and Bluetooth/Satellite/CD/USB Radio with auxiliary input jack. $3, SD_05072 MIRROR Deluxe Mirrors Electrically adjustable mirrors from headliner mounted switch. $ SD_21014 CAMERAS Rear Camera Kit REQUIRES Intelliview IV or 4-line Display with T/S Ready Option where display is moved from another vehicle. Kit contains one (1) rear-facing camera and harness to connect to Intelliview IV display only. System capacity of up to three (3) cameras, additional cameras sold separately. $ SD_25003 CAB DISPLAY MONITOR Line Display, T-S Ready Fixed top-line with Engine RPM & Ground Speed. Bottom three (3) lines are customizable to operator preference. REQUIRED with Auto Guidance Ready Configurations; also provides mounting bracket and wiring harness to connect IntelliView IV display moved from another vehicle into the windrower Large Color Touch Screen Disp. Factory installed and tested IntelliView IV 10-inch color touch -screen display with factory integrated vehicle controls and autoguidance software. REQUIRED with Auto Guidance Complete Configurations No Charge $4, Page 79 of 152 -HT2W SEP-16

80 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) Line Display Fixed top-line with Engine RPM & Ground Speed. Bottom three (3) lines are customizable to operator preference. NON-Auto Guidance Ready Configurations ONLY. ($220.00) SD_25010 DISPLAY Cab A-Pillar Display NOT COMPATIBLE with IntelliView IV touch-screen display, provides additional warning lights and gauges to complement 4-line display equipped windrowers. $ SD_N6393 SEATS Leather Seats Operator s seat with air-suspension, leather-covered with comfort heating and folding leather covered instructor s seat. $1, HYDRAULICS GROUP SD_09001 AUX HYD PUMP & CONTROL VALVE Auxiliary Hydraulic for DWA REQUIRED for use with DuraMerger 419 Crop Merging Attachment. (NOT COMPATIBLE with Hydraulic Reel Drive Kit.) $1, SD_09002 AUX HYD PUMP AND CONTROL VALVE Gear Pump and Control Valve DRAPER READY UNITS ONLY! REQUIRED when Hydraulic Reel Drive Kit # is installed on HS series headers. $1, SD_H5406 POPPET STYLE QUICK COUPLER Poppet Style Couplers-SPW-Disc FOR USE WITH DISC HEADS ONLY: Includes poppet style quick couplers for frequent coupling of disc heads and windrowers. XH5406X No Poppet Style Quick Coupler Includes standard hard-plumb threaded header connections for infrequent header and windrower coupling. $ No Charge Page 80 of 152 -HT2W SEP-16

81 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) WEIGHT GROUP SD_H5407 TRANSPORT BALLAST BOX Transport Ballast Box Provides front ballast REQUIRED when transporting/driving a windrower without a head. Customizable ballast box matches the weight of removed head for proper ballasting. Dealer assembly required of bolt-together ballast box and the addition of specific concrete amounts. See ballast chart for required concrete amounts. NOT COMPATIBLE WITH 4-CY NON-DRAPER $3, SD_H5408 RR BALLAST HANGAR KI Rear Ballast Hangar Kit Rear ballast hanger provides a rear weight bracket for use with 100 pound suitcase weights PN: when rear ballast recommendations exceed the ballast box capacity. 175 LB $1, REQUIRED: Duraswath 436HB and 440HB draper heads SD_T4980 BALLAST PACKAGE lbs. - Ballast Kit SR160-4CY Draper & Haybine HS18 Header SR220-6CY L-HP, Durabine 416, & Duramerger 419 SR260-6CY H-HP & Durabine lbs. - Ballast Kit SR160-4CY Non-Draper & Haybine HS16 Header SR220-6CY L-HP & Durabine 416 SR220-6CY L-HP & DuraSwath 425HB SR260-6CY H-HP, DuraMerger 419, & Durabine 419 Header lbs. - Ballast Kit SR160-4CY Non-Draper & Haybine HS18 Header SR160-4CY Draper, DuraSwath 425HB SR220-6CY L-HP, DuraSwath 425HB SR260-6CY H-HP & Durabine lbs. - Ballast Kit -Not recommended for Tier 4b Speedrower Models lbs. - Ballast Kit SR260-6CY H-HP Draper & Duraswath 430HB Header lbs. - Ballast Kit SR160-4CY Draper & Duraswath 430HB Header SR220-6CY L-HP Draper & Duraswath 430HB Header 200 LB $ LB $ LB $ LB $ LB $1, LB $1, Page 81 of 152 -HT2W SEP-16

82 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) lbs. - Ballast Kit -Duraswath 436HB and 440HB Draper Headers require maximum ballast capacity and additional Rear Ballast Hanger Wholegoods Kit # (175 lbs.) and additional suitcase weights PN (100 lbs. each) sourced from CNH Industrial Parts & Service. XT4980X Standard No Ballast Package SR160-4CY Non-Draper & Haybine HS14 Header SR160-4CY Draper & Haybine HS14, HS16, HS18 Heads SR220-6CY L-HP & Haybine HS16 and HS18 Heads SR260-6CY H-HP & Haybine HS16 & HS18 Heads SR260-6CY H-HP, DuraMerger 419, & Durabine 416 Header 1600 LB $1, LB No Charge AUTOGUIDANCE SD_27047 AUTOGUIDANCE AutoGuidance Ready INCLUDED IN BASE: 1-All Cab and Chassis wiring, including wiring connection to IntelliView IV touch screen display 2-Electrohydraulic auto-guidance steering valve 3-Mounting provisions for Navigation Controller & GPS 372 Receiver No Charge TO COMPLETE FACTORY EQUIPPED AUTO GUIDANCE ORDER: 1- IntelliView IV Large Color Touch Screen Display 2- GPS Receiver (WAAS or OmniSTAR Accuracy) 3- Navigation Controller II No AutoGuidance Ready ($4,343.00) SD_27060 GPS RECEIVER X27060X No GPS Receiver No Charge GPS 372 Receiver - WAAS $3, Factory Installed - Narrow / Wide Band NH372 Receiver WAAS Accuracy GPS 372 Receiver - OMNISTAR Factory Installed - Narrow / Wide Band NH372 Receiver OmniSTAR Accuracy Unlock $5, SD_27061 NAV CONTROLLER X27061X No NAV Controller No Charge NAV Controller $5, Factory Installed Auto Guidance Navigation III Controller Page 82 of 152 -HT2W SEP-16

83 -HT2W 02 SPEEDROWER 220 SP WINDROWER (Grand Island, NE) OTHER SD_H5409 TELEMATICS KIT Telematics Kit PLM CONNECT Factory supplied/dealer Installed option kit REQUIRES Intelliview IV Display, annual PLM Connect subscription, and dealer setup of customer access to PLM CONNECT customer dashboard site. $1, Contact CNH Industrial Parts & Service for pricing and full list of available subscriptions, PLM Connect service level information, and cellular network coverage. LANGUAGE KITS SD_47083 OPERATOR'S MANUAL English Lang Manual No Charge French Canadian No Charge Spanish Manual - NA No Charge X47083X No Additional Operators Manual No Charge FIELD INSTALLED HEADER COMPLETING PACKAGES FOR SHIPMENT WITH BASE UNIT ONLY SD_05143 REMOTE WINDROW SHIELD CONTROL Remote Windrow Shield Control Provides in cab electrical adjustment of swath forming shields. (CANNOT be used with fixed shields on draper-ready units.) $1, SD_20107 HYDRAULIC REEL DRIVE Hydraulic Reel Drive Kit FOR USE WITH HS SERIES SMC HEADS ONLY: Also requires engine mounted auxiliary hydraulic pump with control valve (Draper or Non-draper Configurations) and HS header reel drive DIA# installed on head. $ SD_45036 SICKLE HEADER ADAPT Sickle Header Adaptor Kit REQUIRED FOR HS SICKLE HEAD OPERATION Includes header drive motor and hoses with poppet style quick couplers. $1, Page 83 of 152 -HT2W SEP-16

84 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) Standard Equipment # -MY2017 PRODUCT CHANGES CHASSIS & REAR AXLE # -Rear axle 3 caster post swivels ENGINE maintain chassis height with nearly -Engine MFG FPT/New Holland zero rear height change and heavy- -Emissions Level Tier 4B duty rotational dampers. -Rated Power 250 hp rated* -Independent rear axle suspension -Displacement 411 cu. In. (6.7 L) # -Hay Only - Heavy-duty 120 in. -Num. Cylinders 6 adjustable rear axle with forked arm -Aspiration Turbocharged support and 14L x PR rear -Pre-cleaning Top Spin ** tires -Intercooling Air-to-Air # -Draper Ready - high clearance 135 in. -Fuel System adjustable rear with forked arm -High-pressure common rail support and 14L x PR rear -Electronic fuel injection tires # -Optional cast single arm support with * Manufacturer's rating per ECE R120 / 16.5L x 16.1 RP rear tires (Standard ISO on Prairie Special Configuration) ** TOPSPIN is a registered trademark of the Donaldson Company, Inc. DRIVELINE -Two speed range hydrostatic drive EMISSIONS SYSTEM -Apx. top speed of 18 MPH -EcoBlue HI-eSCR high-efficiency -HD double reduction planetary Selective Catalytic Reduction with final drives engine exhaust muffler / SCR -Spring applied, hydraulically released park brake (console switch controlled) COOLING SYSTEM -High-efficiency, multi-layer cooling # STEERING SYSTEM -High-capacity rotary screen cleaning psi hydraulic steering system system. with dedicated pump and load # -Chaff wiper kit reactive steering provides operator -Vertical opening rotary air screen feedback and optimized straight line tracking. ELECTRICAL SYSTEM -Voltage 12-Volt HEAD DRIVE -Alternator 150 amp Hay Only - Variable displacement 80 -Battery CCA 650 CCA GPM head drive pump -Battery Type Low maintenance -Advanced power management -Num. Batteries 2 system for Durabine disc heads -Draper Ready - Variable displacement FUEL/DEF CAPACITIES twin 40 GPM head drive pumps -Diesel Fuel 120-gallon (454 L) -Dedicated knife drive (High PSI) -DEF Fluid 19-gallon (72 L) -Dedicated canvas & reel drive (Low PSI) Page 84 of 152 -HT2W SEP-16

85 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) Standard Equipment HEAD ATTACHMENT -Lumbar adjustment -Variable speed hydrostatic head -Ride dampener adjustment drive, less head drive motor -Retractable seat belt -Hydraulic poppet couplers for head -Operator s Presence System drive motor attachment for Draper -Instructor's seat with seat belt Ready units only. -Front windshield wiper/washer -Threaded fittings to hard plumb Disc -Climate systems Heads for head drive motor -Air-conditioner and heater with Attachment (Hay units only) manual temperature controls -Independent RH/LH hydraulic head -Dual cab air filtration system: flotation -(1) External fresh air filter -Hydraulic head tilt -(1) In-cab air recirculation filter -In-cab & remote control switches -Cab interior lighting package # -Electronic tilt indicator displayed -(1) Center dome light on 4-line display and Intelliview IV -(1) Right-hand console light equipped windrowers. -Entertainment & communications -Tilt indicator on the tilt cylinder -AM/FM/weather band Radio with -8" stroke head tilt cylinder antenna and two speakers. -Single lever head transport lock -Auxiliary input socket for MP3 player, system satellite radio or portable CD player -Standard head latch system -(2) Additional radio port locations -Large diameter (2.75") head lift with DIN mounting slots cylinders -Business band antenna ready -Front windshield wiper/washer WINDROW SHIELDS -(2) External mount rear view mirrors -Manual adjust hay windrow shields (mechanical adjust) (Non-draper Machines Only) -(1) In-cab rearview mirror -Fixed windrow shields -(2) 12-volt auxiliary power outlets (Draper Machines Only) -Electronic Service Tool diagnostic WEIGHTING AND BALLASTING port -Less chassis ballast; order ballast as appropriate for attached head(s) ENGINE SHIELDS -Sheet molded compound side shields STANDARD CAB -Easy-open gas strut supported -Comfort Ride cab suspension and air-ride rear axle suspension MULTI-FUNCTION HANDLE -Curved, tinted glass with left-hand -CommandGrip MFH with low-effort entry door forward-neutral-reverse ground -Adjustable tilt/telescopic steering speed control with back lighting. column # -Haying MFH: Short stock without -Fore/Aft adjustable console with cup palm rest and hay specific operation holder, lighter & ashtray decal affixed to right cab window. -Deluxe fabric-covered seating # -Draper MFH: Traditional tall stalk -Air-suspension design with palm rest, and hay -Fore/aft isolator specific operational decal decal Page 85 of 152 -HT2W SEP-16

86 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) Standard Equipment affixed to right cab window. TECHNOLOGY FEATURES -MFH Controls for: -Advanced Power Management System -Performance monitor display -RoadCruise Transport mode selection -PLM Precision Land Management -Head raise/lower IntelliSteer auto guidance ready -Head tilt control -Auto guidance engagement ENGINE SHUTDOWN PROTECTION: -Reel speed (draper head) -Automatic engine shutdown -Reel raise/lower (draper head) -Low engine oil pressure -Reel fore/aft (draper head) -Engine coolant overheat -Head cut height (draper head) -Low hydrostatic charge oil pressure -Head lateral tilt (draper head) -Return to cut (draper head) TRANSPORT LIGHTING -(2) Halogen, cab roof-mounted RIGHT-HAND CONSOLE CONTROLS transport lights -Engine speed -(2) Combination rear tail light/brake -Head engagement lights -Head power reverser -(2) Combination turn signal/flashing -Head flotation adjustment hazard lights -Park brake control -Cold start (when equipped) WORK LIGHTING -DuraMerger attachment control -(4) Halogen, cab roof-mounted work (when equipped) lights -(2) Halogen, rear work lights MONITORS AND DISPLAYS -(2) Halogen, stubble lights -Console mounted, adjustable displays -Time delay cab exit light & monitors -12 volt, service light receptacle -Standard monitor: 4-Line, TS-Ready for Auto Guidance Ready units WARRANTY -Optional: 4-Line display for Non-Auto New Holland Standard Warranty Guidance Ready, OR IntelliView IV, Applies 10 inch color touch screen display -Monitored systems -Engine oil pressure -Engine coolant temperature -Engine rpm -Battery voltage -Ground speed -Diesel fuel & DEF fluid levels -Engine/head hours -Hydrostatic transmission charge oil pressure Page 86 of 152 -HT2W SEP-16

87 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) Standard Equipment HIGH VALUE OPTIONS & PACKAGES -AutoGuide Omnistar -Deluxe cab upgrade includes -Factory IntelliSteer auto guidance -Automatic temperature controls complete -Deluxe satellite radio w/ bluetooth -OmniStar correction signal unlocked connectivity (+/- 3 to 5 inch accuracy) -Two (2) additional radio speakers -IntelliView IV color touch screen (4 radio speakers in total) display -Front/rear sun shades -Navigation Controller III -Additional noise suppression -New Holland 372 GNSS Receiver -Prairie Special draper configuration -AutoGuide WAAS includes the following options: -Factory IntelliSteer auto guidance -Auto Guidance Ready with 4-line complete display/ts Ready -WAAS correction signal (+/- 6 to 8 -Deluxe cab package inch accuracy) -Cold weather package -IntelliView IV color touch screen -600/65R28 R1W drive tires display -High clearance single arm -Navigation Controller III tail wheel with 16.5L tires -New Holland 372 GNSS Receiver -Fixed deflector shields (Draper) -Header quick latch (Draper) -Prairie Special logo decal -Speedrower 260 Hay -Auto Guidance Ready with 4-line display/ts Ready -Deluxe cab package -Deluxe mirrors -Cold weather package -580/70R26 drive tires -High clearance single arm tail wheel with 16.5L tires -Poppet Style Couplers for disc heads -Manual deflector shields (Hay) -Header quick latch (Hay) -High road speed with power down Page 87 of 152 -HT2W SEP-16

88 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) Models COMMERCIAL MODEL ENGINE POWER Weight List Price SPEEDROWER_ HP 14,000 LB $146, Factory Supplied Options Order Code Description Weight List Price HAYTOOLS TIRES AND WHEELS DRIVE TIRES SD_16066 WHEELS AND TIRES No Front Tires/Wheels No Charge x 26 12PR R4 $4, /80R R3 $5, x R R1 $5, L x 28 14PR R4 $5, /65R R1W $6, /70R R3 $7, REAR TIRES SD_H6202 REAR TIRE - WHEEL SUPPORT Forked/14L w/damper Standard-Clearance, 3 forked arm caster assemblies with heavy-duty rotational dampers and 14L x 16.1 tires & wheels maintain chassis height with near zero rear height change when reversing Single/16.5L w/damper High-Clearance, 3 single arm caster assemblies and heavy-duty rotational dampers with 16.5L x 16.1 tires maintain chassis height with near zero rear height change when reversing. No Charge $1, Page 88 of 152 -HT2W SEP-16

89 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) FACTORY SUPPLIED OPTIONS LIGHT KITS SD_06037 REAR LIGHTS Deluxe LED Rear Light Package Upgrade provides two (2) forward-facing LED stubble lights and two (2) rear-facing LED stubble lights. $1, SD_06075 FRONT LIGHTS Deluxe LED Front Light Package Upgrade provides two (2) forward-facing halogen road transport lights and four (4) high-intensity LED field lights. $1, ADAPTER PACKAGES SD_H5807 DRAPER HEADER ADAPTER Draper Ready Includes single and double swath delivery capabilities, tandem EDC header drive pumps, lift arm position sensors, fixed position crop deflectors and header quick latch system. $9, For Hay operation order windrow forming shield from the DIA section part # REQUIRED for Durabine disc head operation Order Hydraulic Cross over kit option with new disc headers # or source kit through NH Parts for heads already in service(pn ). (Speedrower 220/260 Draper Ready units are only available with 600, 580, & 21L size front drive tires) SD_H6203 HEADER Q-A SYSTEM Header Quick Latch-Non Draper Lever operated quick release system for header attachment locks Header Quick Latch - Draper Lever operated quick release system for header attachment locks. $ $ ENGINE GROUP SD_02024 COLD WEATHER PKG Cold Weather Package $ Page 89 of 152 -HT2W SEP-16

90 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) TRANSMISSION GROUP SD_N6424 SPEED OPTION Std Road Speed w/o Power Down Two-speed hydrostatic drive, WITHOUT header lift arm power down. TOP SPEED APPROXIMATELY 18 MPH Std Road Speed with Power Down Two-speed hydrostatic drive, WITH header lift arm power down. TOP SPEED APPROXIMATELY 18 MPH High Road Speed w/power Dn Three-speed hydrostatic drive, WITH header lift arm power down. TOP SPEED APPROXIMATELY 24 MPH No Charge $ $2, CAB GROUP SD_05009 CAB Deluxe Cab Upgrade Deluxe Cab Upgrade includes front and rear sunscreens, automatic temperature controls, additional integrated sound suppression materials, four speakers, and Bluetooth/Satellite/CD/USB Radio with auxiliary input jack. $3, SD_05072 MIRROR Deluxe Mirrors Electrically adjustable mirrors from headliner mounted switch. $ SD_21014 CAMERAS Rear Camera Kit REQUIRES Intelliview IV or 4-line Display with T/S Ready Option where display is moved from another vehicle. Kit contains one (1) rear-facing camera and harness to connect to Intelliview IV display only. System capacity of up to three (3) cameras, additional cameras sold separately. $ SD_25003 CAB DISPLAY MONITOR Line Display, T-S Ready Fixed top-line with Engine RPM & Ground Speed. Bottom three (3) lines are customizable to operator preference. REQUIRED with Auto Guidance Ready Configurations; also provides mounting bracket and wiring harness to connect IntelliView IV display moved from another vehicle into the windrower Large Color Touch Screen Disp. Factory installed and tested IntelliView IV 10-inch color touch -screen display with factory integrated vehicle controls and autoguidance software. REQUIRED with Auto Guidance Complete Configurations No Charge $4, Page 90 of 152 -HT2W SEP-16

91 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) Line Display Fixed top-line with Engine RPM & Ground Speed. Bottom three (3) lines are customizable to operator preference. NON-Auto Guidance Ready Configurations ONLY. ($220.00) SD_25010 DISPLAY Cab A-Pillar Display NOT COMPATIBLE with IntelliView IV touch-screen display, provides additional warning lights and gauges to complement 4-line display equipped windrowers. $ SD_N6393 SEATS Leather Seats Operator s seat with air-suspension, leather-covered with comfort heating and folding leather covered instructor s seat. $1, HYDRAULICS GROUP SD_09001 AUX HYD PUMP & CONTROL VALVE Auxiliary Hydraulic for DWA REQUIRED for use with DuraMerger 419 Crop Merging Attachment. (NOT COMPATIBLE with Hydraulic Reel Drive Kit.) $1, SD_09002 AUX HYD PUMP AND CONTROL VALVE Gear Pump and Control Valve DRAPER READY UNITS ONLY! REQUIRED when Hydraulic Reel Drive Kit # is installed on HS series headers. $1, SD_H5406 POPPET STYLE QUICK COUPLER Poppet Style Couplers-SPW-Disc FOR USE WITH DISC HEADS ONLY: Includes poppet style quick couplers for frequent coupling of disc heads and windrowers. XH5406X No Poppet Style Quick Coupler Includes standard hard-plumb threaded header connections for infrequent header and windrower coupling. $ No Charge Page 91 of 152 -HT2W SEP-16

92 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) WEIGHT GROUP SD_H5407 TRANSPORT BALLAST BOX Transport Ballast Box Provides front ballast REQUIRED when transporting/driving a windrower without a head. Customizable ballast box matches the weight of removed head for proper ballasting. Dealer assembly required of bolt-together ballast box and the addition of specific concrete amounts. See ballast chart for required concrete amounts. NOT COMPATIBLE WITH 4-CY NON-DRAPER $3, SD_H5408 RR BALLAST HANGAR KI Rear Ballast Hangar Kit Rear ballast hanger provides a rear weight bracket for use with 100 pound suitcase weights PN: when rear ballast recommendations exceed the ballast box capacity. 175 LB $1, REQUIRED: Duraswath 436HB and 440HB draper heads SD_T4980 BALLAST PACKAGE lbs. - Ballast Kit SR160-4CY Draper & Haybine HS18 Header SR220-6CY L-HP, Durabine 416, & Duramerger 419 SR260-6CY H-HP & Durabine lbs. - Ballast Kit SR160-4CY Non-Draper & Haybine HS16 Header SR220-6CY L-HP & Durabine 416 SR220-6CY L-HP & DuraSwath 425HB SR260-6CY H-HP, DuraMerger 419, & Durabine 419 Header lbs. - Ballast Kit SR160-4CY Non-Draper & Haybine HS18 Header SR160-4CY Draper, DuraSwath 425HB SR220-6CY L-HP, DuraSwath 425HB SR260-6CY H-HP & Durabine lbs. - Ballast Kit -Not recommended for Tier 4b Speedrower Models lbs. - Ballast Kit SR260-6CY H-HP Draper & Duraswath 430HB Header lbs. - Ballast Kit SR160-4CY Draper & Duraswath 430HB Header SR220-6CY L-HP Draper & Duraswath 430HB Header 200 LB $ LB $ LB $ LB $ LB $1, LB $1, Page 92 of 152 -HT2W SEP-16

93 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) lbs. - Ballast Kit -Duraswath 436HB and 440HB Draper Headers require maximum ballast capacity and additional Rear Ballast Hanger Wholegoods Kit # (175 lbs.) and additional suitcase weights PN (100 lbs. each) sourced from CNH Industrial Parts & Service. XT4980X Standard No Ballast Package SR160-4CY Non-Draper & Haybine HS14 Header SR160-4CY Draper & Haybine HS14, HS16, HS18 Heads SR220-6CY L-HP & Haybine HS16 and HS18 Heads SR260-6CY H-HP & Haybine HS16 & HS18 Heads SR260-6CY H-HP, DuraMerger 419, & Durabine 416 Header 1600 LB $1, LB No Charge AUTOGUIDANCE SD_27047 AUTOGUIDANCE AutoGuidance Ready INCLUDED IN BASE: 1-All Cab and Chassis wiring, including wiring connection to IntelliView IV touch screen display 2-Electrohydraulic auto-guidance steering valve 3-Mounting provisions for Navigation Controller & GPS 372 Receiver No Charge TO COMPLETE FACTORY EQUIPPED AUTO GUIDANCE ORDER: 1- IntelliView IV Large Color Touch Screen Display 2- GPS Receiver (WAAS or OmniSTAR Accuracy) 3- Navigation Controller II No AutoGuidance Ready ($4,343.00) SD_27060 GPS RECEIVER X27060X No GPS Receiver No Charge GPS 372 Receiver - WAAS $3, Factory Installed - Narrow / Wide Band NH372 Receiver WAAS Accuracy GPS 372 Receiver - OMNISTAR Factory Installed - Narrow / Wide Band NH372 Receiver OmniSTAR Accuracy Unlock $5, SD_27061 NAV CONTROLLER X27061X No NAV Controller No Charge NAV Controller $5, Factory Installed Auto Guidance Navigation III Controller Page 93 of 152 -HT2W SEP-16

94 -HT2W 03 SPEEDROWER 260 SP WINDROWER (Grand Island, NE) OTHER SD_H5409 TELEMATICS KIT Telematics Kit PLM CONNECT Factory supplied/dealer Installed option kit REQUIRES Intelliview IV Display, annual PLM Connect subscription, and dealer setup of customer access to PLM CONNECT customer dashboard site. $1, Contact CNH Industrial Parts & Service for pricing and full list of available subscriptions, PLM Connect service level information, and cellular network coverage. LANGUAGE KITS SD_47083 OPERATOR'S MANUAL English Lang Manual No Charge French Canadian No Charge Spanish Manual - NA No Charge X47083X No Additional Operators Manual No Charge FIELD INSTALLED HEADER COMPLETING PACKAGES FOR SHIPMENT WITH BASE UNIT ONLY SD_05143 REMOTE WINDROW SHIELD CONTROL Remote Windrow Shield Control Provides in cab electrical adjustment of swath forming shields. (CANNOT be used with fixed shields on draper-ready units.) $1, SD_20107 HYDRAULIC REEL DRIVE Hydraulic Reel Drive Kit FOR USE WITH HS SERIES SMC HEADS ONLY: Also requires engine mounted auxiliary hydraulic pump with control valve (Draper or Non-draper Configurations) and HS header reel drive DIA# installed on head. $ SD_45036 SICKLE HEADER ADAPT Sickle Header Adaptor Kit REQUIRED FOR HS SICKLE HEAD OPERATION Includes header drive motor and hoses with poppet style quick couplers. $1, Page 94 of 152 -HT2W SEP-16

95 Windrower Ballast Requirements for MY Maximum Ballast Box Capacity for MY15 & MY16 Windrowers lbs. (32 weights) Header Type Sickle Headers Disc Headers Draper Headers Header Width (ft) T3, 4-cyl. non-draper (lbs) T4, 4-cyl. non-draper (lbs) T3 or T4, 4-cyl draper** (lbs) *** T3 or T4, 6-cyl. low-horsepower, nondraper or draper ready** (lbs) *** 2600*** T3 or T4, 6-cyl. high-horsepower, nondraper or draper ready** (lbs) T3 or T4, 6-cyl. low-horsepower, nondraper or draper w/merger (lbs) T3 or T4, 6-cyl. high-horsepower, nondraper or draper w/merger (lbs) *** 2500*** ** Requires lift arm extensions for 14' sickle header on all draper 4-cyl. units, and 16' & 18' sickle header on all 6-cyl. units *** For Units requiring >1600 lb. of rear ballast, recommend: full ballast 1600 lbs., + additional rear ballast weight 175 lbs., + additional 100 lb. compact tractor suitcase weights as needed Plate Weight(s) Internal Ballast Box - Order 50 pound plate weights via CNH Industrial Parts & Service PN: MY Ballast Bar Kit PN: PN: MY 14 SPW ballast hanger kit. Includes hangar, hardware required to attach hangar, relocate tail lamp assemblies, hardware required to retain suitcase weights, and weld-on gussets for suspended rear axle models. 100 lb. suitcase weights for rear ballast hanger kit. PN: PN: MY Ballast Bar Kit MY 15 SPW ballast hanger kit. Includes hangar, hardware required to attach hangar, hardware required to retain suitcase weights, and weld-on gussets. 100 lb. suitcase weights for rear ballast hanger kit. PN: PN: MY Ballast Bar Kit MY SPW ballast hanger kit. Includes hangar, hardware required to attach hangar, and hardware required to retain suitcase weights. 100 lb. suitcase weights for rear ballast hanger kit. MY 2014 Ballast Bar Kit With tail lamp assemblies. MY Ballast Bar Kit Without tail lamp assemblies. Page 95 of 152

NEW DISCBINE CENTER-PIVOT DISC MOWER-CONDITIONERS DISCBINE 313 I DISCBINE 316

NEW DISCBINE CENTER-PIVOT DISC MOWER-CONDITIONERS DISCBINE 313 I DISCBINE 316 NEW DISCBINE CENTER-PIVOT DISC MOWER-CONDITIONERS DISCBINE 313 I DISCBINE 316 CLOSER CUTTING, FASTER DRYDOWN, INCREASED DURABILITY New Holland has taken the Discbine mower-conditioner to a new level with

More information

PROCART AND PROCART PLUS CARTED WHEEL RAKES. ProCart 819 I 1022 I 1225 ProCart 1225 Plus I 1428 Plus

PROCART AND PROCART PLUS CARTED WHEEL RAKES. ProCart 819 I 1022 I 1225 ProCart 1225 Plus I 1428 Plus PROCART AND PROCART PLUS CARTED WHEEL RAKES ProCart 819 I 1022 I 1225 ProCart 1225 Plus I 1428 Plus 02 PROCART SERIES CARTED WHEEL RAKES Make more hay in every pass. Whether you choose a ProCart deluxe

More information

PULL-TYPE FORAGE EQUIPMENT DESCRIPTION REVISION NUMBER. Index 09/01/16 1 PULL-TYPE FORAGE HARVESTERS FP230 09/01/ FP240 09/01/16 5-6

PULL-TYPE FORAGE EQUIPMENT DESCRIPTION REVISION NUMBER. Index 09/01/16 1 PULL-TYPE FORAGE HARVESTERS FP230 09/01/ FP240 09/01/16 5-6 PULL-TYPE FORAGE LATEST PAGE EQUIPMENT DESCRIPTION REVISION NUMBER Index 09/01/16 1 PULL-TYPE FORAGE HARVESTERS FP230 09/01/16 2-4 FP240 09/01/16 5-6 HAY PICKUP HEADERS 890-W 09/01/16 7 27-P 09/01/16 8

More information

HEAVY-DUTY AND ECONOMY DISC MOWERS

HEAVY-DUTY AND ECONOMY DISC MOWERS HEAVY-DUTY AND ECONOMY DISC MOWERS H6730 I H6740 I H6750 I H6830 I HM234 I HM235 I HM236 2 3 INTRODUCTION FAST, CLEAN, DEPENDABLE CUTTING IN TOUGH CONDITIONS H6000 DISC MOWERS USE THE PROVEN MOWMAX CUTTERBAR

More information

DC 93 & 103 ROTARY DISC MOWER CONDITIONERS

DC 93 & 103 ROTARY DISC MOWER CONDITIONERS DC 93 & 103 ROTARY DISC MOWER CONDITIONERS DC 93 & 103 ROTARY DISC MOWER CONDITIONERS 2 With every rotary disc mower conditioner, you get the proven reliability of the large disc cutterbar with the peace

More information

WINDROW MERGERS. WINDRoW MERGERS

WINDROW MERGERS. WINDRoW MERGERS WINDRoW MERGERS MERGER FEATURES A heavy duty 42" wide, ribbed cross conveyor easily accommodates the massive flow of material. A cross conveyor shut-off is optional on all Hydra-Swing Mergers. Replaceable

More information

MOWERS, TEDDERS AND RAKES

MOWERS, TEDDERS AND RAKES MOWERS, TEDDERS AND RAKES 02 FRONT MOUNTED MOWERS DiscCutter F and DuraDisc F front mounted disc mowers. The New Holland range of front mounted disc mowers is available in two distinct variants. The DiscCutter

More information

DISCBINE DISC MOWER-CONDITIONERS

DISCBINE DISC MOWER-CONDITIONERS DISCBINE DISC MOWER-CONDITIONERS Discbine 313 I Discbine 316 I H7220 I H7320 I H7230 I H7330 2 3 MODEL OVERVIEW THE DEFINITION OF DISC MOWER-CONDITIONERS New Holland is well-known for its expertise in

More information

New Holland Heavy-Duty and Economy Disc Mowers H6730 H6740 H6750 H6830 HM234 HM235 HM236

New Holland Heavy-Duty and Economy Disc Mowers H6730 H6740 H6750 H6830 HM234 HM235 HM236 New Holland Heavy-Duty and Economy Disc Mowers H6730 H6740 H6750 H6830 HM234 HM235 HM236 9 Fast, clean, dependable cutting in tough conditions New H6000 disc mowers use the proven MowMax cutterbar to give

More information

DISCBINE DISC MOWER-CONDITIONERS. Discbine 313 I Discbine 316 I H7220 I H7320 I H7230 I H7330

DISCBINE DISC MOWER-CONDITIONERS. Discbine 313 I Discbine 316 I H7220 I H7320 I H7230 I H7330 DISCBINE DISC MOWER-CONDITIONERS Discbine 313 I Discbine 316 I H7220 I H7320 I H7230 I H7330 02 MODEL OVERVIEW The definition of disc mower-conditioners. New Holland is well-known for its expertise in

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required)

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

DISCBINE DISC MOWER-CONDITIONERS. Discbine 310 I Discbine 312

DISCBINE DISC MOWER-CONDITIONERS. Discbine 310 I Discbine 312 DISCBINE DISC MOWER-CONDITIONERS Discbine 310 I Discbine 312 02 INTRODUCING THE DISCBINE 310 & 312 High productivity. Versatile operation. Easy to own. NEW Discbine 310 and 312 disc mower-conditioners

More information

MEGACUTTER TRIPLE DISC MOWER-CONDITIONERS 512 I 530

MEGACUTTER TRIPLE DISC MOWER-CONDITIONERS 512 I 530 MEGACUTTER TRIPLE DISC MOWER-CONDITIONERS 512 I 530 2 3 CUT A TRIPLE-WIDE SWATH OF PRODUCTIVITY MegaCutter triple disc mower-conditioners cut more than just your hay. By cutting a 29-foot, 6-inch swath

More information

DISC MOWERS, TEDDERS & RAKES

DISC MOWERS, TEDDERS & RAKES Performance You Can Count DISC MOWERS, TEDDERS & RAKES HMG HT EWR BSR 3PB BS On HAY TOOLS HMG SERIES HAY MOWERS Bush Hog s four models of HMG hay mowers fit a large range of tractor sizes and production

More information

MOWER CONDITIONERS Rotary disc and Sickle

MOWER CONDITIONERS Rotary disc and Sickle MOWER CONDITIONERS Rotary disc and Sickle Every day, you demand more. More from the land. More from yourself. More from your equipment. This is why we deliver more. More speed. More reliability. More features

More information

New Holland Discbine Disc Mower-Conditioners

New Holland Discbine Disc Mower-Conditioners New Holland Discbine Disc Mower-Conditioners 1409 1410 1411 1412 1431 1432 1441 1442 Fast field speeds in tough conditions Make your choice of rubber-roll or flail conditioning for fast drydown and earlier

More information

DISCBINE DISC MOWER-CONDITIONERS

DISCBINE DISC MOWER-CONDITIONERS DISCBINE DISC MOWER-CONDITIONERS DISCBINE 313 I DISCBINE 316 I H7220 I H7320 I H7230 I H7330 2 3 MODEL OVERVIEW THE DEFINITION OF DISC MOWER-CONDITIONERS New Holland is well-known for its expertise in

More information

DC 133 AND 163 CENTER-PIVOT ROTARY DISC MOWER CONDITIONERS

DC 133 AND 163 CENTER-PIVOT ROTARY DISC MOWER CONDITIONERS DC 133 AND 163 CENTER-PIVOT ROTARY DISC MOWER CONDITIONERS FEEDING AND CLEANING SYSTEM HIGH SPEED, HIGH QUALITY. Glide through lush stands of alfalfa, acres of dense grass and even tough cane crops, at

More information

New Holland H8000 Series Self-Propelled Windrower Specifications

New Holland H8000 Series Self-Propelled Windrower Specifications H8000 Series Self-Propelled Windrower Specifications H8040 H8040 Prairie Special H8060 H8080 MODEL H8040 H8060 H8080 H8040 PRAIRIE SPECIAL ENGINE New Holland 4-cylinder New Holland 6-cylinder New Holland

More information

DISC MOWERS. DuraDisc Heavy-duty 107M I 108M I 109M I 210M HM Series Economy HM234 I HM235 I HM236

DISC MOWERS. DuraDisc Heavy-duty 107M I 108M I 109M I 210M HM Series Economy HM234 I HM235 I HM236 DISC MOWERS DuraDisc Heavy-duty 107M I 108M I 109M I 210M HM Series Economy HM234 I HM235 I HM236 02 DURADISC HEAVY-DUTY DISC MOWERS Dependable, clean cutting with time-saving convenience. Forage quality

More information

DISC MOWERS PULL-TYPE & MOUNTED DISC MOWERS PULL-TYPE & MOUNTED

DISC MOWERS PULL-TYPE & MOUNTED DISC MOWERS PULL-TYPE & MOUNTED PULL-TYPE & MOUNTED DISC MOWERS PULL-TYPE & MOUNTED DISC MOWERS TD102 PULL-TYPE DISC MOWER 1 Model 10 ft. 5 in. (3.15 m) Cutting Width PULL-TYPE CONVENIENCE PLUS EASY TRACTOR HOOKUP USING A SIMPLE CLEVIS

More information

DISC MOWERS, TEDDERS & RAKES

DISC MOWERS, TEDDERS & RAKES Performance You Can Count DISC MOWERS, TEDDERS & RAKES On HAY TOOLS DHM, HT, EWR, BSR, 3PB AND BS SERIES Performance You Can Count On DISC HAY MOWERS DHM7 DHM8 DHM9 DHM10 by Bush Hog NEW FOR 2017 HAYMAKER

More information

1 KS-46 T Parts Manual. Table Of Contents

1 KS-46 T Parts Manual. Table Of Contents KS-46 T Parts Manual Table Of Contents Drawbar - Serial No. 585400-606253... 2 Drawbar - Serial No. 606254-... 4 Optional Front Support Wheel - Serial No. 606254-... 6 Main Frame... 8 Rotor...10 Rotor...12

More information

RAKES. Innovators in the Manufacture of Agricultural and Commercial Equipment H&S HAS A MODEL TO FIT YOUR OPERATION

RAKES. Innovators in the Manufacture of Agricultural and Commercial Equipment H&S HAS A MODEL TO FIT YOUR OPERATION RAKES Innovators in the Manufacture of Agricultural and Commercial Equipment H&S HAS A MODEL TO FIT YOUR OPERATION GROUND ACTION DRI & 1100 SERIES V-RAKE ALL V-style Rakes are available in 8, 10 and 12

More information

DISC MOWERS Pull-type Mounted and Pull-type

DISC MOWERS Pull-type Mounted and Pull-type DISC MOWERS Pull-type Mounted and Pull-type Mounted For those who demand more Every day, you demand more. More from the land. More from yourself. More from your equipment. So case ih delivers more. More

More information

Watch Vermeer products work at vermeer.com.

Watch Vermeer products work at vermeer.com. TEDDERS The Hook Tine Advantage Haying in high moisture climates? With above normal rainfall? Or, just trying to close the gap between cutting and baling to shorten drying times and reduce nutritional

More information

ROLABAR RAKES 57 I 256 I 258 I 260 I 216

ROLABAR RAKES 57 I 256 I 258 I 260 I 216 ROLABAR RAKES 57 I 256 I 258 I 260 I 216 02 ROLABAR RAKE HERITAGE AND PERFORMANCE Pick up more of your valuable hay. Proven raking for 50 years and counting When something works well, it lives on! New

More information

New Holland Rolabar Rakes

New Holland Rolabar Rakes New Holland Rolabar Rakes 57 256 258 260 252 216 Pick up more of your valuable hay New Holland Rolabar rakes let you feed cleaner hay and more of it. Offset wheels are set close to the basket, so tines

More information

COMPLEMENTARY PRODUCTS

COMPLEMENTARY PRODUCTS Wheel Rakes SPEEDRAKE SR 50 / SR 100 GII / SR 300 / SR 600 GII / SR 800 SPEEDRAKE COMPLEMENTARY PRODUCTS SR 50 / SR 100 GII / SR 300 / SR 600 GII / SR 800 MORE PRODUCTS TO MEET YOUR NEEDS With over 700

More information

leaders in quality mowers tedders rakes

leaders in quality mowers tedders rakes leaders in quality mowers tedders rakes Complete assortment 2016-2017 Athy Kington Praha CATALOGUE CONTENT FRONT AND SIDE MOUNTED DISC MOWERS SIDE MOUNTED MOWERS SD - 220... 2 SD - 260... 2 SD - 260C...

More information

Triple Mergers 2330 & 2334

Triple Mergers 2330 & 2334 Triple Mergers 2330 & 2334 www.oxbo.com 2330 & 2334 Oxbo mergers have been the leaders in the forage industry for years. Now, the next generation merger is here; the Oxbo 2330 and 2334 Forage Merger. Improved

More information

WD 4 SERIES WINDROWERS AND HEADERS

WD 4 SERIES WINDROWERS AND HEADERS WD 4 SERIES WINDROWERS AND WD 4 Series Windrower Specifications RODUCT SECIFICATIONS MODELS WD1204 WD1904 WD2304 OWER Engine Case IH 4-Cyl. Tier 3 Case IH 6-Cyl. Tier 3 Rated Engine ower ISO - ECE R120

More information

Rotary Rakes RR2109 RR2211 RR2313 RR2324. Single-Basket. Dual-Basket

Rotary Rakes RR2109 RR2211 RR2313 RR2324. Single-Basket. Dual-Basket Rotary Rakes Single-Basket Dual-Basket RR2109 RR2211 RR2313 RR2324 Single- or dual-basket models let you rake crop quickly and delicately to get your high-quality baling done sooner. Before you step out

More information

Bale Carriers Mowers Rakes Tedders HAY TOOLS

Bale Carriers Mowers Rakes Tedders HAY TOOLS Bale Carriers Mowers Rakes Tedders HAY TOOLS Farm King Hay Tools: bale carriers, mowers, rakes and tedders FARM KING PRODUCT LINE-UP FARM KING PRODUCT CATEGORIES Grain Handling Tillage Application Equipment

More information

HAYING EQUIPMENT INDEX - CROP PACKAGING

HAYING EQUIPMENT INDEX - CROP PACKAGING HAYING EQUIPMENT INDEX - CROP PACKAGING EQUIPMENT DESCRIPTION LATEST REVISION PAGE NUMBER Index 9/1/2016 1 *Small Square Balers BC5050 (14'' x 18'' bale) 9/1/2016 2-3 BC5060 (14'' x 18'' bale) 9/1/2016

More information

1 RS-300/D 320/D 340/D 350H Parts Manual

1 RS-300/D 320/D 340/D 350H Parts Manual 300/D 320/D 340/D 350H Parts Manual Table Of Contents Three Point Hitch / Hitch Frame Assembly... 3 Tongue Pull Hitch Assembly... 7 Main Gearbox... 11 Crank Handle & Gear... 13 Hydraulic Lift... 15 Rotor

More information

1 KW-550T Parts Manual. Table Of Contents

1 KW-550T Parts Manual. Table Of Contents KW-550T Parts Manual Table Of Contents Drawbar... 2 Central Gearbox - Serial No. 523800-554988... 4 Central Gearbox - Serial No. 523800-554988... 6 Central Gearbox - Serial No. 554989-... 8 Central Gearbox

More information

RAKES RAKES

RAKES RAKES 2019 RAKES 2019 RAKES It s a simple fact the better you rake, the better you bale. That means shaping the best possible baler-ready windrows to attain the best possible moisture level and consistency,

More information

MERGE MAXX MM 300 / 700

MERGE MAXX MM 300 / 700 Hay Mergers MERGE MAXX MM 300 / 700 www.kuhnnorthamerica.com Invest in Quality MERGE MAXX REEL COMMERCIAL 300 / 700 MAXIMUM PRODUCTIVITY AND PERFORMANCE HIGH-QUALITY FORAGE High-quality forage requires

More information

HAY RAKES T W I N R A K E S D U R A B U L L R A K E W H E E L S W H E E L R A K E S

HAY RAKES T W I N R A K E S D U R A B U L L R A K E W H E E L S W H E E L R A K E S HAY RAKES T W I N R A K E S D U R A B U L L R A K E W H E E L S W H E E L R A K E S Looking for a fast, easy way to produce great-looking bales? Get yourself a quality rake! R2800 TwinRake Hydraulic control

More information

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders H A Y M A K I N G A T I T S B E S T! GF KUHN GYROTEDDERS Strong features that lead to quality tedding The rotors of all 102 and

More information

Performance has a name.

Performance has a name. PULL-TYPES FOR HAY R SERIES ROTARY DISC Performance has a name. A SERIES MOWER CONDITIONER 2 Faster down the straight-away. GET READY TO PUSH RESET on your expectations on what a pull-type hay machine

More information

You can t rely on the weather. But you can rely on your John Deere MoCo.

You can t rely on the weather. But you can rely on your John Deere MoCo. Mower Conditioners 2 Mower Conditioners You can t rely on the weather. But you can rely on your John Deere MoCo. Tight schedules. Unpredictable weather. The two most important challenges every farmer or

More information

MOWERS MOWERS

MOWERS MOWERS 019 MOWERS 019 MOWERS Vermeer understands that in order to efficiently harvest many acres of hay, you need high-quality equipment. Designed with that in mind, the Q3 cutter bar is a modular shaft-driven

More information

2018 MOWERS 2018 MOWERS

2018 MOWERS 2018 MOWERS 2018 MOWERS 2018 MOWERS Vermeer understands that in order to efficiently harvest many acres of hay, you need high-quality equipment. Designed with that in mind, the Q3 Cutter Bar is a modular shaft-driven

More information

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders HAY MAKING AT ITS BEST! GF KUHN GYROTEDDERS Strong features that lead to quality tedding The rotors of all 1001 and 1002 series

More information

Remember yesterday s 3-point, sickle bar mower conditioners? Many are still in use

Remember yesterday s 3-point, sickle bar mower conditioners? Many are still in use MOWERS Reinventing the mower Remember yesterday s 3-point, sickle bar mower conditioners? Many are still in use today, but when it comes to efficient, high-production hay harvesting, the rules have changed

More information

2015 RAKES 2015 RAKES

2015 RAKES 2015 RAKES 2015 RAKES 2015 RAKES It s a simple fact the better you rake, the better you bale. That means shaping the best possible baler-ready windrows to attain the best possible moisture level and consistency,

More information

2016 RAKES 2016 RAKES

2016 RAKES 2016 RAKES 2016 RAKES 2016 RAKES It s a simple fact the better you rake, the better you bale. That means shaping the best possible baler-ready windrows to attain the best possible moisture level and consistency,

More information

Frontier Overhead Frame Wheel Rakes

Frontier Overhead Frame Wheel Rakes Frontier Overhead Frame Wheel Rakes WR33 and WR34 Series: 10 to 19 Wheels Affordable raking solutions for Get The Production You Need If you question how you can achieve faster, more efficient haymaking,

More information

Salford Group Inc. American Whole Goods Price Book. Effective October 24, 2016

Salford Group Inc. American Whole Goods Price Book. Effective October 24, 2016 Salford Group Inc. American Whole Goods Price Book Effective October 24, 2016 1 Intentionally Blank 2 Product Index Secondary Tillage Primary Independent Series Harrows Click a page title to navigate to

More information

COMMERCIAL EQUIPMENT. Snowblowers Triplex Finishing Mower Stump Grinder Brush Grapple Rotary Sweep Snow Blade Rear Blade Quick Hitch Loader Attachment

COMMERCIAL EQUIPMENT. Snowblowers Triplex Finishing Mower Stump Grinder Brush Grapple Rotary Sweep Snow Blade Rear Blade Quick Hitch Loader Attachment COMMERCIAL EQUIPMENT Snowblowers Triplex Finishing Mower Stump Grinder Brush Grapple Rotary Sweep Snow Blade Rear Blade Quick Hitch Loader Attachment Allied by Farm King Commercial Equipment: snowblowers,

More information

New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080

New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080 New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080 1 High speed and high capacity A V A I L A B L E H E A D E R S Model Engine Cab Disc Headers Sickle Headers HB Series Draper

More information

DMC U B O TA M O W E R C O N D I T I O N E R S DMC8000/DMC8500

DMC U B O TA M O W E R C O N D I T I O N E R S DMC8000/DMC8500 K U B O TA M O W E R C O N D I T I O N E R S 8000/8500 Trailed mower conditioners ranging from 9 2 (2.80m) to 13 1 (4.0m) with left hand or center pivot drawbar options DESIGNED TO OFFER Y PROTECTING YOUR

More information

GF 102 / 1002 / 1012 Series

GF 102 / 1002 / 1012 Series Rotary Tedders GF 102 / 1002 / 1012 Series www.kuhnnorthamerica.com Invest in Quality ROTARY GF TEDDERS GF 102 / 1002 / 1012 SERIES GF THE MOST COMPLETE AND ADAPTIVE TEDDER RANGE ON THE MARKET SPEED UP

More information

Standard Duty Cutter 3 Medium Duty Cutter 4 Heavy Duty Cutter (5, 6 & 7 ) 5 Heavy Duty Cutter (8 ) 6 Heavy Duty Cutter (10 ) 7 M-Heavy Duty Cutter (5

Standard Duty Cutter 3 Medium Duty Cutter 4 Heavy Duty Cutter (5, 6 & 7 ) 5 Heavy Duty Cutter (8 ) 6 Heavy Duty Cutter (10 ) 7 M-Heavy Duty Cutter (5 PRODUCT PAGE NUMBER Standard Duty Cutter 3 Medium Duty Cutter 4 Heavy Duty Cutter (5, 6 & 7 ) 5 Heavy Duty Cutter (8 ) 6 Heavy Duty Cutter (10 ) 7 M-Heavy Duty Cutter (5 & 6 ) 8 Super Duty Cutter (6 &

More information

Gyrotedders Two and four rotor models

Gyrotedders Two and four rotor models GF Gyrotedders Two and four rotor models HAY MAKING AT ITS BEST! KUHN Gyrotedders Meeting the needs of tomorrow s farmer today. KUHN, the world leader in rotary tedders, continues to provide farmers with

More information

FLAIL SHREDDERS BLADE TYPES: "L" - HAMMER BLADES OR "Y" - REGULAR FLAIL BLADES. Description. 814 lbs Call for Price

FLAIL SHREDDERS BLADE TYPES: L - HAMMER BLADES OR Y - REGULAR FLAIL BLADES. Description. 814 lbs Call for Price www.bertima.it FLAIL SHREDDERS This mulcher is well suited for any type of residue such as grass, pruning and branches in vineyards and orchards up to 8-10 cm in diameter. The mulcher consist of a rigid

More information

New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080

New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080 New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080 High speed and high capacity A V A I L A B L E H E A D E R S Model Engine Cab Disc Headers Sickle Headers HB Series Draper

More information

RETAIL DISTRIBUTOR CURT & BRENDA HOWARD 275 W HIGH STREET LONDON, OH PHONE: /16/16 FAX: Brownie PAGE 1 OF 16

RETAIL DISTRIBUTOR CURT & BRENDA HOWARD 275 W HIGH STREET LONDON, OH PHONE: /16/16 FAX: Brownie PAGE 1 OF 16 INDEX Landscaping Grader Blades, Medium Duty Adjustable Angle...pg 2 Grader Blades, Three Point, Tilt & Angle...pg 2 Grader Blades, Three Point Slider...pg 2 Grader Blades, Three Point, Hydraulic Tilt

More information

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used:

STATE OF MINNESOTA PRICE PAGE (Typed Response Required) Version of Excel used: SPEC #422-1017 T-628(5) Tractors, Ag Type Factory Attach. STATE OF MINNESOTA PRICE PAGE (Typed Response Required) October, 2017 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone

More information

LARGE SQUARE BALERS LB434XL & LB434RXL LB434XL & LB434RXL

LARGE SQUARE BALERS LB434XL & LB434RXL LB434XL & LB434RXL LARGE SQUARE BALERS LB434XL & LB434RXL LB434XL & LB434RXL LARGE SQUARE BALERS HIGH-EFFICIENCY HAY PRODUCTION: MAKE THE MOST OF SHORT BALING WINDOWS. From the 31.5-inch longer bale chambers to the rugged

More information

1 KW-880 Parts Manual

1 KW-880 Parts Manual Headstock... 2 Hitch Beam... 4 Central Gearbox... 6 Central Gearbox... 8 Intermediate Beam... 10 Intermediate Beam... 12 Intermediate Beam Outside... 14 Intermediate Beam Outside... 16 Outer Support Tube...

More information

EasyCut Trailed Center PULL-TYPE MOWER CONDITIONER

EasyCut Trailed Center PULL-TYPE MOWER CONDITIONER EasyCut Trailed Center 13'&16' PULL-TYPE MOWER CONDITIONER German engineers. North American fields. Forage will never be the same. The EasyCut Trailed Center mower conditioner serves as a shining example

More information

ROTARY TEDDERS: ROTARY RAKES: 4 - rotor, 6- rotor. 1 - rotor, 2- rotor in-line rakes, 2 rotor rakes with central swath.

ROTARY TEDDERS: ROTARY RAKES: 4 - rotor, 6- rotor. 1 - rotor, 2- rotor in-line rakes, 2 rotor rakes with central swath. For professionals ROTARY TEDDERS: 4 - rotor, 6- rotor ROTARY RAKES: 1 - rotor, 2- rotor in-line rakes, 2 rotor rakes with central swath ...Clean, thoroughly aerated swath TABLE OF CONTENTS Page Farm s

More information

NEW SPEEDROWER SELF-PROPELLED WINDROWERS 130 I 200 I 240 NEW DURASWATH DRAPER HEADERS 425HB I 430HB I 435HB I 440HB

NEW SPEEDROWER SELF-PROPELLED WINDROWERS 130 I 200 I 240 NEW DURASWATH DRAPER HEADERS 425HB I 430HB I 435HB I 440HB NEW SPEEDROWER SELF-PROPELLED WINDROWERS 130 I 200 I 240 NEW DURASWATH DRAPER HEADERS 425HB I 430HB I 435HB I 440HB 2 3 NOW THERE S EVEN MORE SPEED IN SPEEDROWER New Speedrower Self-Propelled Windrowers

More information

AllCropHarvester.com. New/New Old Stock List as of 03/04/2016

AllCropHarvester.com. New/New Old Stock List as of 03/04/2016 AllCropHarvester.com New/New Old Stock List as of 03/04/2016 If your part is not listed, please contact us. We may be able to get it, and/or have it as a used part. Contact us for prices not listed/used.

More information

463(S)-523(T) T Fanex rotary tedders

463(S)-523(T) T Fanex rotary tedders 463(S)-523(T)-553-643-683-763-833T-903-1103 Fanex rotary tedders Fanex 683 Fanex 463(S)-523(T)-553-643-683-763-833T-903-1103 The right tedder for every size farm Tedding quality at its best The Fanex range

More information

SB SMALL SQUARE BALERS

SB SMALL SQUARE BALERS SB SMALL SQUARE BALERS Every day, you demand more. More from the land. More from yourself. More from your equipment. Which is why we also demand more. More capacity. More productivity-boosting features.

More information

HAYBOB 300 / 360

HAYBOB 300 / 360 Universal Haymakers 300 / 360 www.kuhn.com be strong, be KUHN 2 300 360 KUHN UNIVERSAL HAYMAKERS! RAKING AND TEDDING Raking and tedding plays a vital role in the grass harvesting process. Timing is of

More information

PG. 2 I Table of Contents

PG. 2 I Table of Contents 2013 RAKES Want great-looking bales? Get yourself a quality rake! It s a simple fact the better you rake, the better you bale. That means shaping the best possible baler-ready windrows to attain the best

More information

Taarup 2400 and 2500 series Mounted Disc Mowers. Disc Mowers offering reliable performance and a clean cut

Taarup 2400 and 2500 series Mounted Disc Mowers. Disc Mowers offering reliable performance and a clean cut Taarup 2400 and 2500 series Mounted Disc Mowers Disc Mowers offering reliable performance and a clean cut Taarup 2400 series Flexible suspension and reliable performance Taarup offers a new rear mounted

More information

Product Catalog Innovators in the Manufacture. of Agricultural and Commercial Equipment

Product Catalog Innovators in the Manufacture. of Agricultural and Commercial Equipment Product Catalog 2018 Innovators in the Manufacture of Agricultural and Commercial Equipment XTRACAP FORAGE BOXES XTRACAP forage boxes are available in 17, 19, and 21 lengths with a chain or twin auger

More information

O P E R A T O R ' S M A N U A L

O P E R A T O R ' S M A N U A L O P E R A T O R ' S M A N U A L TEDDER TD47 PQ990107 (07/0/1) To the Owner; Thank-You for choosing a quality product from Frontier Equipment. We strive to give you the best equipment and the best level

More information

DMC DMC6000/DMC7000/ DMC8000/DMC8500 Mounted and trailed disc mower conditioners with working widths from 2.4 to 3.5m

DMC DMC6000/DMC7000/ DMC8000/DMC8500 Mounted and trailed disc mower conditioners with working widths from 2.4 to 3.5m KUBOTA disc mowers 6000/7000/ 8000/8500 Mounted and trailed disc mower conditioners with working widths from 2.4 to 3.5m FULL LINE OF MOWER C Why Kubota Mower Conditioners? The Kubota range of mower conditioners

More information

Multidisc Mowers GMD and 77HD SELECT

Multidisc Mowers GMD and 77HD SELECT Multidisc Mowers GMD 44-55 - 66 and 77HD SELECT GRASS HARVESTING AT ITS BEST! Multidisc Mowers GMD series 44-55 - 66 and 77HD SELECT The achievement of several decades of experience... 1 A respectable

More information

BACKSAVER AUGER 12" and 14" Models - XL Series

BACKSAVER AUGER 12 and 14 Models - XL Series 4 Backsaver Auger Manufactured for highcapacity with heavy-duty construction 122' length 120-153 hp required Swing away auger with a self-leveling hopper Hydraulic winch lift Double flighted in hopper

More information

SPECIFICATIONS WEIGHT

SPECIFICATIONS WEIGHT 2650 BALEBUSTER Exclusive Features available ONLY on the 2650 BALEBUSTER Heavy-Duty Flails and High Speed Rotor: The 2650 features an oil bath chain case to reverse the direction of the PTO, increasing

More information

Snowblowers Triplex Finishing Mower Stump Grinder Brush Grapple Rotary Sweep Snow Blade Rear Blade Quick Hitch Loader Attachment COMMERCIAL EQUIPMENT

Snowblowers Triplex Finishing Mower Stump Grinder Brush Grapple Rotary Sweep Snow Blade Rear Blade Quick Hitch Loader Attachment COMMERCIAL EQUIPMENT Snowblowers Triplex Finishing Mower Stump Grinder Brush Grapple Rotary Sweep Snow Blade Rear Blade Quick Hitch Loader Attachment COMMERCIAL EQUIPMENT Allied by Farm King Commercial Equipment: snowblowers,

More information

WHOLEGOODS PRICING Universal Line Effective Febraury 11, 2012

WHOLEGOODS PRICING Universal Line Effective Febraury 11, 2012 WHOLEGOODS PRICING Universal Line Effective Febraury 11, 2012 Table of Contents Switchblade Sickle Bar...1 Switchblade Mount Kit Options...2 Super Heavy-Duty Flail SHD 74...3 SHD 88...5 SHD 96...7 Grass

More information

Triple set. GXT range, working width 40 (12.3 m)

Triple set. GXT range, working width 40 (12.3 m) Triple set GXT range, working width 40 (12.3 m) Cutter bar GXT Large working widths increase the efficiency The greatest possible efficiency is dependent on large working widths. Large working widths therefore

More information

HR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.

HR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount. HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards

More information

MOWER CONDITIONERS FASTER. BETTER. FORAGE.

MOWER CONDITIONERS FASTER. BETTER. FORAGE. MOWER CONDITIONERS FASTER. BETTER. FORAGE. 2 WEATHER-PROOF YOUR HARVEST 3 When you use a MoCo, you re not taking any chances. It produces quick-drying forage that you can harvest faster before that unexpected

More information

10 Ft Flex Wing New*Roadside Cutters

10 Ft Flex Wing New*Roadside Cutters Bush Hog TOUGH 10 Ft Flex Wing New*Roadside Cutters * Featuring NEW Bush Hog TOUGH 2710L Flex Wing Roadside Cutter Unit Is Available In Right Or Left Hand Version The Only 10 Ft Roadside Cutters Built

More information

1 HR-301/D Parts Manual. Table Of Contents

1 HR-301/D Parts Manual. Table Of Contents Table Of Contents 301/D Parts Manual 3 Point Hitch...2 Pull-Type Hitch...4 Main Frame...6 Angle Adjuster - Serial Number 44982 & Prior...8 Rotor Assembly - Serial Number 44982 & Prior...10 Rotor Assembly

More information

HR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm

HR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm HR0 Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Tongue & Main Frame Guards Gearbox & Tine Arm Axle Assembly Rotary Gearbox PTO Shaft 0//0 Tongue & Main Frame 0 0 0 0 Ref# Description

More information

6200 LANDOLL DISC AN AGGRESSIVE, LEVEL PERFORMER. Model

6200 LANDOLL DISC AN AGGRESSIVE, LEVEL PERFORMER. Model 600 LANDOLL DISC Model 650-5 AN AGGRESSIVE, LEVEL PERFORMER 1 611 LANDOLL DISC LED Light Kits Light kits () and a slow moving vehicle sign are standard equipment on all 600 Series Discs and comply with

More information

Selecting Forage Machinery

Selecting Forage Machinery Selecting Forage Machinery Dennis Buckmaster Purdue University 2008 Indiana Cattle and Forage Symposium Forage Systems Operations Stack for storage Mow / condition Rake Bale Packaged transport Wrap for

More information

BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS

BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS PARTS MANUAL BALE KING VORTEX 3110 BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX: (306)

More information

Belt Merger MERGE MAXX 950.

Belt Merger MERGE MAXX 950. Belt Merger MERGE MAXX 950 www.kuhn.com be strong, be KUHN 2 MERGE MAXX 950 A DIFFERENT WAY OF WINDROWING The MERGE MAXX 950 is a highly versatile machine. It is capable of gently gathering any kind of

More information

Parma Sugarbeet Defoliator - Triple Drum

Parma Sugarbeet Defoliator - Triple Drum SBD-01 Parma Sugarbeet Defoliator - Triple Drum 100 Series Standard Equipment Steel Cup Flails on Front Drums Easy Height Adjustment (Full Coverage on #1 Rotor) 15" or 24" Rear Wheels (Steerable or Non-Steer)

More information

TT6101 Rotary Tedder

TT6101 Rotary Tedder TT0 Rotary Tedder 0/0/0 Illustrated Parts Breakdown Page Chassis Assembly Page Page Transport Axle Assembly S/N - Transport Axle Assembly S/N + Page Page Page Page Page Transport Lock Assembly Lift Frame

More information

New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080

New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080 New Holland H8000 Series Speedrower Self-Propelled Windrowers H8040 H8060 H8080 High speed and high capacity A V A I L A B L E H E A D E R S Model Engine Cab Disc Headers Sickle Headers HB Series Draper

More information

TE TE4000/TE4500/TE6000/

TE TE4000/TE4500/TE6000/ KUBOTA Rotary Tedders TE TE4000/TE4500/TE6000/ TE6500/TE8500/TE10000 Rotary tedders with working widths from 4.6 to 13.3m 2 SPEED UP YOUR DRY ING PROCESS A tedder for any demand Kubota has an extensive

More information

Blackfoot. ID Blackfoot. ID MDL 1110 CONVEYOR OPEN DIRT Page 1 of 19

Blackfoot. ID Blackfoot. ID MDL 1110 CONVEYOR OPEN DIRT Page 1 of 19 1110 MDL 1110 CONVEYOR OPEN DIRT Page 1 of 19 1110-55-0000000000000000000297 Blackfoot. ID Select Length 24' Select Width 30" Select Frame Style STANDARD & OVERSEAS Select Lift Kit MANUAL Select Conveyor

More information

Hay and Forage Attachments Guide

Hay and Forage Attachments Guide Hay and Forage Attachments Guide Section 1: Round Balers Section 2: Small Square Balers Section 3: Bale Ejectors Section 4: Self-Propelled Windrowers Section 5: Windrower Platforms Section 6: Mower Conditioners

More information

Balers & Hay Tools DISCO ROLLANT VOLTO VARIANT LINER QUADRANT

Balers & Hay Tools DISCO ROLLANT VOLTO VARIANT LINER QUADRANT Balers & Hay Tools DISCO VOLTO LINER ROLLANT VARIANT QUADRANT CLAAS Balers and Hay Tools More power for your harvest chain. Perfectly coordinated - harvesting systems by CLAAS. For daily grassland-based

More information

HDX rake FeaTUreS SpeCiFiCaTiONS X-SerieS rake X & HDX model X10 X12 X13 X15 Wheel diameter teeth per Wheel rakes rake tooth diameter

HDX rake FeaTUreS SpeCiFiCaTiONS X-SerieS rake X & HDX model X10 X12 X13 X15 Wheel diameter teeth per Wheel rakes rake tooth diameter X & HDX RAKES X-RAKE FEATURES The H&S X-Series Rakes feature a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of Crop. The variable

More information

ROTARY RAKE PARTS BOOK MODEL E

ROTARY RAKE PARTS BOOK MODEL E ROTARY RAKE PARTS BOOK MODEL 1150 17.00803E This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:

More information

TUB GRINDERS

TUB GRINDERS www.haybuster.com TUB GRINDERS www.haybuster.com What does the Hay H-1000 TUB GRINDER The Haybuster PTO Tub Grinder line is made up of three sizes of grinders plus the option of an electric motor. The

More information