NO MINIMUMS - NO RESERVES PUBLIC AUCTION SAWMILL AND ROLLING STOCK. 9AM - WEDNESDAY - JUNE 24 Preview 8-4pm, Tuesday, June 23

Transcription

1 NO MINIMUMS - NO RESERVES PUBLIC AUCTION CLOSING SAWMILL GREEN CREEK LUMBER CO., LLC SAWMILL AND ROLLING STOCK 9AM - WEDNESDAY - JUNE 24 Preview 8-4pm, Tuesday, June ECLIPSE W. DRIVE, PORT ANGELES, WA CAT 988B WHEEL LOADER KOCKUMS 6 AIR STRAIN BANDMILLL SIMONDS OPTI-MATIC RM0880 BID LIVE OR BID ONLINE WITH James G. Murphy Co. Commercial & Industrial Auctioneers SALEM 60 RESAW MurphyLIVE! murphyauction.com

2 AUCTION STARTS AT 9AM HEADRIG KOCKUMS 6 AIR STRAIN DOUBLE CUT BANDMILL W/200 HP/1200 RPM DRIVE, STARTER W/DYNAMIC BRAKE, 40 OUTFEED ROLLCASE W/(13) 10-1/2 X48 ROLLS, CAB & CONTROLS, S/N: 2857 CARRIAGE-CARRIAGE DRIVE-SCANNING FILER & STOWELL C400, 40 X26 4-KNEE TEMPOSONIC POSITIONED LOG CARRIAGE, TONGS, DOGS & KICKERS, (5) TRUCKS, HYDRAULIC CABLE TENSIONING, BUMPERS & 90 LB RAIL, INDUSTRIAL ELECTRIC 300 HP/ RPM DC MOTOR TO FALK MODEL 1753 REDUCER, INDUSTRIAL ELECTRIC 300 HP SOLID STATE DRIVE W/MATRA 400 KVA ISOLATION TRANSFORMER, 1998 YIELDMASTER CARRIAGE OPTIMIZING SCANNER W/(48) EYES, 2008 LUCIDYNE READY SCAN CARRIAGE SETWORKS, HYDRAULIC UNITS, CAB & CONTROLS SLABBER LOG TURNER CM&E 34 RH TEMPOSONIC POSITIONED SLABBER W/LINDEX SEGMENTED KNIFE SYSTEM, (6) KNIVES, 24 FACE, 6 DEPTH OF CUT, APPROX. 200 HP/1770 RPM MOTOR W/BENSHAW SOFT START LOG TURNER, LOG STOP & LOADER SALEM 48 HYDRAULIC OPERATED LOG TURNER W/30 HP HYDRAULIC UNIT, 22 6-ARM LOG STOP & LOADER LOG DECK & TRANSFERS 25 7-STRAND H124 INFEED LOG DECK 20 4-STRAND JACK LADDER LOG TRANSFER 16 4-STRAND H84 INFEED LOG TRANSFER 40 OUTFEED ROLLCASE W/5-STRAND JUMP TRANSFER EDGER SCHURMAN 8 X60 SBA BOARD EDGER W/(3) SHIFTING SAWS, APPROX. 250 HP MOTOR, APPROX. 20 INFEED ROLLCASE W/LINE BARS, 16, 12 & 8 5-STRAND INFEED TRANSFERS, APPROX. 8 OUTFEED ROLLCASE, LASER LIGHTS, HYDRAULIC UNIT, CAB & CONTROLS RESAW SALEM 60 RESAW W/AIR STRAIN, APPROX. 100 HP MOTOR, TEMPOSONIC POSITIONED LINE BAR, FEED ROLLS, APPROX STRAND H78 ROOFTOP INFEED TRANSFER, 8 OUTFEED GRAVITY ROLLCASE, APPROX STRAND 81X CHAIN OUTFEED TRANSFER, APPROX. 18 X80 WASTE BELT, 40 HP BLOWER, (2) HYDRAULIC UNITS, LUBE SYSTEM TRIMMER-UNIT SAW 20 PET (TRIMMER) W/(4) DROP SAWS, (2) JUMP SAWS, 8 6-STRAND LUGGED FEED THRU TRANSFER, 16 7-STRAND H78 ROOFTOP INFEED TRANSFER, 10 6-STRAND OUTFEED TRANSFER W/TIPPLE & BELT, 24 8-STRAND 81X CHAIN OUTFEED, PRECISION 14MRH CHOP SAW SHOP BUILT 96 UNIT SAW W/APPROX. 30 HP MOTOR, CHIPPER-SCREEN-BINS PRECISION KNIFE CHIPPER W/150 HP MOTOR, HORIZONTAL INFEED, BOTTOM DISCHARGE SODERHAMN CS27 7 X7 CHIP SCREEN W/IN & OUT BELTS & CHAIN, S/N: & 20-UNIT HYDRAULIC OPERATED CHIP BINS W/IN & OUT BELTS & CHAIN VIBRATORY CONVEYORS CARRIER 18 X105 BALANCED VIBRATORY CONVEYOR CARRIER 18 X30 VIBRATORY CONVEYOR CARRIER 18 X24 VIBRATORY CONVEYOR W/RENS L240 METAL DETECTOR COMPRESSORS-DRYERS (2) QNW 370D, 75 HP ROTARY SCREW COMPRESSORS, S/N: , HOUR METER READS: 60,014 & S/N: HOUR METER READS: 32,916 QNW 20D, 20 HP ROTARY SCREW COMPRESSOR, S/N: SULLAIR V-200S, 200 HP ROTARY SCREW COMPRESSOR PNEUMATECH PH750 HEATLESS REGENERATIVE DRYER, 750 SCFM, 140 PSIG, APPROX. 3 X9 S/N: PNEUMATECH EH-400 HEATLESS REGENERATIVE DRYER, 400 SCFM, 150 PSIG, S/N: 9709-S

3 NO MINIMUMS - NO RESERVES FILING ROOM SIMONDS OPTI-MATIC RM0880 BANDSAW LEVELER, S/N: (2) ARMSTRONG #4 BANDSAW SHARPENERS, S/N: & ARMSTRONG #4 BANDSAW STRETCHER ROLL, S/N:3596 ARMSTRONG 3-10C CIRCLE SAW STRETCHER ROLL, S/N: PRECISION 42 TUB GRINDER THOMPSON H2CV DUAL GUIDE GRINDER, S/N:771 SALEM GUIDE MILLING MACHINE BARNHARDT #51 WHEEL GRINDER, S/N: 582 ACME CIRCLE SAW SHARPENER BELL K200 CHAIN SHARPENER, S/N: 75D12 ELECTRICAL IES 300 HP/ RPM CARRIAGE DRIVE W/MATRA 200 KVA ISOLATION TRANSFORMER 2-SECTION MILL MAIN (14) ALLEN BRADLEY CENTERLINE MCC SECTIONS BENSHAW 200 HP SOFT START TRANSFERS-CONVEYORS-ROLLCASES MILL TRANSFERS TO 70 MILL BELT & CHAIN CONVEYORS TO 80 MILL ROLLCASES TO 50 (20) LUMBER ROLL OUTS (20) TIMBER STACKING FRAMES 1986 JET SPEED DRILL PRESS W/DAYTON MACHINE VICE RAMCO RP55 55 TON BEARING PRESS S/N: JET HVBS-7MW ¾ HP HORIZONTAL/VERTICAL BANDSAW S/N: ADDITIONAL EQUIPMENT INCLUDING: (4) POLY BANDING CARTS W/FROMM 18V ELECTRIC BANDERS W/CHARGERS & EXTRA BATTERIES, (43) NEW & USED ELECTRIC MOTORS INCLUDING: (7) SKK 10 HP, SKK 20 HP, SKK 5 HP, SKK 3 HP, (2) SKK 2 HP GEAR HEAD MOTORS & (8) ELECTRIC MOTORS INCLUDING: 3 HP, 10 HP, 20 HP, 40 HP, 50 HP, 75 HP & 150 HP, SKK REXNORD GEAR HEAD MOTORS & REDUCERS, HUSKY PORTABLE CONCRETE MIXER, (8) FORKLIFT TIRES (UNUSED), STEEL INVENTORY, ASSORTED NUT AND BOLT INVENTORY, POWERMATIC 1200 DRILL PRESS S/N: 420V1198, JET BENCH GRINDER, ASSORTED CHAIN INVENTORY, ASSORTED HAND AND POWER TOOLS, (4) STEEL STORAGE CABINETS, PIPE FITTING INVENTORY, ELECTRIC SPARES, LARGE SPROCKET INVENTORY, HYDRAULIC HOSE INVENTORY, (150+) BEARING INVENTORY, CONVEYOR SPRING INVENTORY, NUT AND BOLT INVENTORY, HYDRAULIC CYLINDER INVENTORY, (2) PAINT SPRAYERS, SHOP SERIES, TABLE SAW, NORTH STAR PRESSURE WASHER, (2) STEEL WORK BENCHES, FITTINGS, LUMBER INVENTORY, CHOP SAW, LUMBER ROLL OUTS, 20 CONEX, 40 CONEX, LOG TRAILER LOADER & MUCH MORE! SHOP EQUIPMENT MILLER-MATIC GOLD STAR 452 CC/DC WELDING POWER SOURCE, S/N: MA400768U MILLER-MATIC BOB CAT 250 CC/CV, AC/DC WELDER, 10,000 WATT GENERATOR S/N: LE MILLER-MATIC SRH-333, 300AMP POWER SUPPLY W/LEADS HYPER-THERM POWER MAX 10,000 G3 SERIES PLASMA CUTTER PARKER PARKRIMP 1 HYDRAULIC HOSE PRESS W/LESSON 1.5 HP MOTOR RIDGID 300 PIPE MACHINE HONDA WT20X GENERATOR

4 NO MINIMUMS - NO RESERVES ROLLING STOCK 1989 CAT 988B WHEEL LOADER W/MEDFORD LOG FORKS, 35/65-33 TIRES, CAT CYL DIESEL, HOUR METER READS: 32,314, S/N: 50W CAT 988B WHEEL LOADER, MEDFORD LOG FORKS, 35/65 R33 TIRES, CAT CYL DIESEL, HOUR METER READS: 29,781, S/N: 50W CAT 980B WHEEL LOADER W/LOG FORKS, CAT 6 CYL DIESEL, TIRES, HOUR METER READS: 2,983, S/N: 89PS7-64 CAT 980C WHEEL LOADER W/MEDFORD 2C1157 LOG FORKS, TIRES, CAB, CAT 3406 DIESEL, HOUR METER READS: 8,018 RAYGO WAGNER L-90 LOG LOADER, CUMMINS NTC 400 DIESEL, CRT 5633 TRANS, FRONT TIRES, 23.5 R25 REAR TIRES, HOUR METER READS: 9,077, S/N: DOOSAN DAEWOO SOLAR 225LL HEEL BOOM LOG LOADER, 12 STICK, PIERCE ROTARY HEAD, DOOSAN 6 CYL, HOUR METER READS: 17,035, S/N: DHKHEBDO DOOSAN DAEWOO SOLAR 220LL HEEL BOOM LOG LOADER, 12 STICK, PIERCE ROTARY HEAD, DOOSAN 6 CYL, HOUR METER READS: 15,285, S/N: CAT 325LL HYD HEEL BOOM LOG LOADER, CAT CYL DIESEL, HOUR METER READS: 24,676, S/N: 8NK HYSTER H80XM 8,000 LB FORK LIFT, HRT, SIDE SHIFT, DIESEL 3-STAGE MAST, LUMBER FORKS, LIFT-N-WEIGH LNW-4 SCALE, HOUR METER READS: 2,802, S/N: LOORV06395L 1999 HYSTER H80X 8,000 LB FORK LIFT, HRT, SIDE SHIFT, DIESEL, 3-STAGE MAST, LUMBER FORKS, HOUR METER READS: 2,120, S/N: F005DO HYSTER H80XL 8,000 LB FORKLIFT, HRT, SIDE SHIFT, DIESEL, 2-STAGE MAST, LUMBER FORKS, HOUR METER READS: 10,634, S/N: G BID LIVE OR BID ONLINE WITH MurphyLIVE!

5 AUCTION STARTS AT 9AM TERMS & CONDITIONS 10% BUYERS PREMIUM ON ALL ITEMS 13% BUYERS PREMIUM ON ALL ONLINE PURCHASES DUE TO INSURANCE AND SAFETY REASONS, CHILDREN UNDER 12 CANNOT BE ADMITTED PAYMENT: FULL PAYMENT MUST BE MADE NO LATER THAN 4:00 PM FRIDAY, JUNE 26th. PAYMENT MUST BE MADE BY CASH, CASHIERS CHECK, WIRE TRANSFERS, MASTERCARD OR VISA ONLY. CHECKS ARE ACCEPTED ONLY WITH BANK LETTER OF GUARANTEE. REMOVAL: NO PURCHASES MAY BE REMOVED DURING THE AUCTION UNLESS ANNOUNCED BY THE AUCTIONEER. SMALL ITEMS MUST BE REMOVED BY 3:30 PM FRIDAY, JUNE 26TH. ALL EQUIPMENT MUST BE REMOVED NO LATER THAN 3:30 PM, FRIDAY, AUGUST 21ST. (REMOVAL DEADLINES MAY BE MODIFIED BY AUCTIONEER S ANNOUNCEMENT). REMOVAL HOURS: 7:00 AM 3:30 PM, MONDAY THROUGH FRIDAY. NO WEEKEND OR HOLIDAY REMOVAL. UPON AWARD OF BID DISMANTLERS TAKE RESPONSIBILITY FOR ANY ENVIRONMENTAL ISSUES THEY CREATE (E.G. SPILLED HYDRAULIC OIL). DISMANTLERS ARE REQUIRED TO PROVIDE THEIR OWN MATERIALS TO CONTAIN & CLEAN UP ANY OIL SPILLAGE. INSURANCE: DISMANTLERS, CONTRACTORS OR BUYERS REMOVING EQUIPMENT ARE REQUIRED TO PROVIDE $1,000, DOLLAR GENERAL LIABILITY INSURANCE CERTIFICATE SHOWING THE JAMES G MURPHY COMPANY AND GREEN CREEK LUMBER CO. AS THE ADDITIONAL INSURED PARTIES. INSURANCE CERTIFICATE AND PROOF OF WORKMEN S COMPENSATION COMPLIANCE MUST BE ON FILE AT SALE SITE WITH THE JAMES G MURPHY CO BEFORE DISMANTLING COMMENCES. FIRE PROTECTION POLICY WILL BE IN EFFECT AT AUCTION SITE. THE TIME OF SALE. ALL INFORMATION WAS OBTAINED FROM SOURCES DEEMED RELIABLE. ALTHOUGH EVERY PRECAUTION HAS BEEN TAKEN TO ENSURE ACCURACY, THE PRINCIPAL, THE JAMES G MURPHY CO., THE ADVERTISING COORDINATOR, AND ALL OF THEIR AGENTS SHALL NOT BE RESPONSIBLE FOR ANY ERRORS OR OMISSIONS THEREIN. IT IS FOR THIS REASON THAT WE RECOMMEND THAT ALL ITEMS BE THOROUGHLY INSPECTED PRIOR TO THE POINT OF SALE. ANNOUNCEMENTS MADE BY THE AUCTIONEER AT THE TIME OF SALE TAKE PRECEDENCE OVER PRINTED MATTER. AUCTIONEER RESERVES THE RIGHT TO SELL ACCESSORIES PARTS OR ATTACHMENTS ON A SEPARATE AND/OR AGGREGATE BASIS ABSENTEE BIDS: ABSENTEE BIDS WILL BE ACCEPTED WITH 25% DEPOSIT. ABSENTEE BIDS UNDER $ ARE NOT ACCEPTED. FOR COMPLETE RULES REGARDING ABSENTEE BIDS CALL OUR OFFICE OR INQUIRE AT THE AUCTION SITE. DRIVERS DIRECTIONS FROM WESTBOUND HWY 101 FOLLOW THROUGH THE TOWN OF PORT ANGELES. HWY 101 TURNS LEFT ONTO N LINCOLN STREET. FOLLOW N LINCOLN FOR APPROXIMATELY ONE MILE AND TURN RIGHT ONTO W LAURIDSEN BLVD (STILL HWY 101). GO FOR ONE MILE ON W LAURIDSON BLVD AND TURN LEFT ONTO ECLIPSE INDUSTRIAL PARKWAY. (AT THIS POINT WATCH FOR AUCTION SIGNS) TAKE THE NEXT RIGHT ONTO ECLIPSE WEST DRIVE. FOLLOW ECLIPSE WEST DRIVE FOR ONE HALF MILE AND ARRIVE AT MILL SITE. WARRANTY DISCLAIMER: ALL SALES ARE FINAL. ALL ITEMS ARE BEING SOLD AS IS, WHERE IS, WITH ALL FAULTS AND WITHOUT ANY WARRANTIES AS TO MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE. THE PRINCIPAL, THE AUCTIONEER, THE ADVERTISING COORDINATOR, AND ANY OF THEIR AGENTS MAKES NO EXPRESS OR IMPLIED WARRANTIES OF ANY TYPE. COMPLETE TERMS AND CONDITIONS OF SALE WILL BE AVAILABLE AT

6 Public Auction 9AM - WEDNESDAY - JUNE 24 James G. Murphy Co. Commercial & Industrial Auctioneers P.O. Box 82160, Kenmore, WA PRESORTED FIRST CLASS MAIL U.S. POSTAGE PAID SEATTLE, WA PERMIT NO DOOSAN DAEWOO SOLAR 220LL James G. Murphy Co. Commercial & Industrial Auctioneers PUBLIC AUCTION Closing Sawmill GREEN CREEK LUMBER CO., LLC Sawmill & Rolling Stock 436 ECLIPSE W. DRIVE, PORT ANGELES, WA BID LIVE OR BID ONLINE WITH MurphyLIVE! 9AM - WEDNESDAY - JUNE murphyauction.com