Spare parts list. Hydraulic Power Pack PAC P 13. Chicago Pneumatic Construction Tools

Transcription

1 Spare parts list Hydraulic Power Pack PAC P 13 Chicago Pneumatic Construction Tools

2 Spare parts list PAC P No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN

3 PAC P 13 Spare parts list Introduction Welcome! Protect your investment in the world s finest hydraulic tools. Use genuine CP replacement parts. The purchase of replacement parts for your CP tools deserves the same good judgment that resulted in the purchase of the tools themselves. Each genuine CP part is made from carefully selected and inspected material, subjected to sophisticated machinery and finishing processes and heat-treated to produce just the right combination of hardness, ductility and impact resistance for its intended use. Each part is identical to, and made concurrently with, parts used in production tools. The use of parts other than genuine CP replacement parts can lead to substandard performance, early failure, possible damage of other parts and, in some instances, unsafe conditions. Use only authorized parts. Any damage or malfunction caused by unauthorized parts will not be covered by the Warranty or Product Liability. Any machine modification not approved by Chicago Pneumatics may result in serious injuries to yourself or others. To reduce the risk of injury, read and understand the relevant safety and operating instructions before operating the machine. Before undertaking any maintenance or changing the working tool on hydraulic machines, always switch off the hydraulic oil supply and bleed the machine by activating the start and stop device. Then disconnect the hydraulic hose from the machine. The PAC P 13 is a hydraulic power pack designed for operating CP hydraulic breakers and other work tools. 3

4 Spare parts list PAC P 13 A

5 PAC P 13 Spare parts list No. Part Number Quantity Description Frame Washer 3/8"x Screw M10x50, use Loctite Plastic pipe plug Handle Washer ø Cowl For EU approved power packs Cowl For not EU approved power packs Filler cap Washer ø Screw M5x Screw M6x Gauge hose L=300 mm Filter gauge complete Incl. clamp Fitting 04 Use sealing tape Label Panel for PAC P 13 A 5

6 Spare parts list PAC P 13 B 6

7 PAC P 13 Spare parts list No. Part Number Quantity Description Cooler guard Seal Oil cooler Washer ø12/6.5x1.5 (steel) Nut M Screw M6x12, use Loctite Tank/chassis Complete with guard and plate Wheel Only available in pairs Washer ø Seal Seal ring Bonded seal 3/8" BSP Fitting 06 Thread plug 3/8" BSP Rubber foot Sight glass Rubber grommet Washer ø Screw M10x14, use Loctite Data plate Not supplied separately B

8 Spare parts list PAC P 13 C 8

9 PAC P 13 Spare parts list No. Part Number Quantity Description Pump plate Fan inlet ring Screw UNC3/8x Fan Spacer ring Lock plate Engine shaft extension Engine Honda GX390K1QXB Washer 3/ Washer ø Washer ø Screw M10x70, use Loctite Nut M Screw M8x Engine half coupling Coupling spider Pump half coupling Nut M Washer ø Screw M8x30, use Loctite Pump 10.0 cc For EU approved power packs Pump 8.5 cc For not EU approved power packs Distance bushing Screw UNF3/8x Washer ø Screw M8x16, use Loctite Spacer Stop screw M4x Spring 0.9x9.1x Parallel key 6.3x6.3x63 C 9

10 Spare parts list PAC P 13 D 10

11 PAC P 13 Spare parts list No. Part Number Quantity Description Adaptor ¾ UNF ⅜" BSP Use Loctite Seal ring ¾ UNF Bonded seal ¾ UNF Adaptor BSP male Use Loctite Seal ring Bonded seal 1/8 BSP Valve block Oil filter 25 Micron Thermostat complete Washer 5/8" Filter adaptor Use Loctite Thermostat end cap Locking ring ø36x Screw M8x Nut M Clamp plate Seal Handle M6, use Loctite O-ring ø9.6x Roll pin ø4x Roll pin ø4x Spool Pressure relief valve Seal ring ø5/ø9x Screw M5x10, use Loctite Seal ring Bonded seal ⅜ BSP Quick-release coupling ⅜" Flat-face female Protective cap For ⅜" and ½" female QRC Quick-release coupling ⅜"Flat-face male Protective cap For ⅜" male QRC Screw M5x8, use Loctite Hose fitting ½ hose barb - ½ BSP male Seal ring Bonded seal ½ BSP Seal ring ø5/ø9x Fitting 02 Use Loctite By-pass valve Filter washer Valve block complete Incl. fig. No D 11

12 Spare parts list PAC P 13 E 12

13 PAC P 13 Spare parts list No. Part Number Quantity Description Cylinder POD complete Seal kit For POD cylinder Knob For POD cylinder Hose clip For POD hose Bracket POD Thumb screw M6x Nut M Screw M6x12, use Loctite Washer ø12/6.5x1.5 (steel) Hose 1/8 BSP F - 1/8 BSP F Cylinder holder E 13

14 Spare parts list PAC P 13 F 14

15 PAC P 13 Spare parts list No. Part Number Quantity Description Hose clip ø26/ Cooler return line Nipple Seal ring Bonded seal ½ BSP Cooler feed line Hose fitting ¾ hose - ½ BSP male Suction hose Elbow hose fitting ½ hose - ¾ BSP male High pressure hose Elbow hose fitting ¾ hose - ¾ BSP male Hose clip ø21/ Banjo bolt ½" BSP Seal ring Bonded seal ¾ UNF Seal kit PAC P 13 Incl. fig. No. 31, 32, 81, 83, 97, 99, 104, 106, 173, 182 Optional equipment: Twin extension hose complete Incl. fig. No Seal ring Bonded seal ½ BSP Quick-release coupling ½" Flat-face female Quick-release coupling ½" Flat-face male Protective cap For ½" female QRC Protective cap For ½" male QRC Twin extension hose 7 m ½" BSP M BSP M Test equipment F 15

16 No. Copyright Chicago Pneumatic Construction Tools STOCKHOLM SWEDEN Chicago Pneumatic Construction Tools