Universal Joint Dimensional Reference Guide
|
|
- Christian Russell
- 5 years ago
- Views:
Transcription
1 Catalog No. UJ2014D Weatherly No Supersedes Cat. No. UJ2011D Universal Joint Dimensional Reference Guide Innovative Drivetrain Solutions
2 GOLD Universal Joints Neapco Premium Quality Universal Joints Universal Joint Series Lubricated for Life - High Performance Sealing System Meets OEM Performance Standards Covered by Neapco s Extended Warranty Backed by Neapco s Superior Customer Service
3 IMPORTANT INFORMATION Issue Date 2013 Weatherly No. 090 Catalog UJ2014D Please read the following important information before using this Catalog: ALWAYS CONSULT AND REVIEW THE ORIGINAL MANUFACTURERS INSTRUCTION MANUAL(S) TO DETERMINE THE APPROPRIATE INSTALLATION PROCEDURES FOR A PARTICULAR VEHICLE APPLICATION. FOR THE LATEST INFORMATION ALWAYS REFER TO THE NEAPCO ecatalog IMPORTANT NOTICE The data listed in this catalog is correct to the best of our knowledge, having been compiled from sources of information which we believe to be reliable. However, we cannot assume any responsibility for possible error. s included in this catalog are manufactured for use only in the intended O.E.M. vehicle application(s). Installation and use in a vehicle that has been modified to any degree that is not consistent and equivalent to O.E.M. production specifications for the vehicle application(s) may result in reduced life or possible part failure. WARRANTY We warrant to the original purchaser all new parts to be free of defects in material and workmanship when such parts are used on applications which have been approved by our Engineering Department, but not against damage caused by negligence or abuse. Our obligations and liabilities under this Warranty shall be limited to replacing or repairing such parts if found upon inspection by us to be defective. OUR WARRANTIES ARE STRICTLY LIMITED TO THOSE JUST STATED. WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ALL IMPLIED WARRANTIES ARISING FROM A COURSE OF DEALING, USAGE OR TRADE, BY STATUE OR OTHERWISE ARE HEREBY DISCLAIMED, and in the event of breach of any warranty or any legal action brought by buyer based on alleged negligence or other tortious conduct of us, buyer's sole and exclusive remedy will be replacement of defective material as stated above. WE WILL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR CONTINGENT DAMAGES OF ANY KIND. We make no warranty whatsoever with respect to component parts or accessories not supplied by us. Copyright 2013 Neapco, LLC Pottstown, Pennsylvania. All rights reserved. No part of this book can be reproduced in any form without specific written permission from the copyright owner. Produced in The United States of America. i
4 TABLE OF CONTENTS Section Conversion U-Joints Listed by Round Cap U-Joints Listed by Diameter Wing and Block U-Joints Listed By Size All U-Joints Listed by Page HOW TO USE THIS CATALOG For Conversion U-Joints Measure Round Diameter and, or if the Series is know, reference to determine the two different Series to be converted. For Round Cap U-Joints Measure Round Diameter and to determine the correct part number. For Wing and Block U-Joints Measure the value (centerline to centerline), Round Diameter (where applicable) and to determine the correct part number. U-Joints reference by Use this numerical reference by part number to confirm dimensional attributes for each part number. Type Abbreviations Round bearing Types ISR - Inside Snap Ring OSR - Outside Snap Ring Wing Types DWT - Delta Wing Threaded HWD - High Wing Drilled LWD - Low Wing Drilled LWT - Low Wing Threaded ii
5 UNIVERSAL JOINT IDENTIFICATION Round Inside Lock-Up/Snap Ring (ISR) This universal joint design uses round bearing cups with a snap ring groove on the outside diameter of the bearings and machined flat surfaces on the inside of the yoke ears. It is easier to measure the lock-up for this style by measuring the yoke from inside ear to inside ear. If the yoke is not available, lock-up can be measured on the universal joint itself. 1. Assemble bearing cups onto cross. 2. Install snap rings in bearing grooves. 3. Remove rubber seals or clamp bearing cups with a C-clamp or vise. 4. Measure across the outside of the two installed snap rings facing one another to obtain the lockup dimension. 5. Measure the outside diameters of the bearing cups. Conversion joints and some OE applications may have two different diameter bearing cups. 6. For conversion type universal joints repeat steps 1-5 for the other leg of the universal joint. Round Outside Lock-Up/Snap Ring (OSR) This universal joint design uses round bearing cups with a flat ground back surface. The cups are retained in the yoke by a snap ring that locks into a groove in the yoke crosshole. 1. Assemble bearing cups onto cross. 2. Remove rubber seals or clamp bearing cups with a C-clamp or vise. 3. Measure across the outside of the two bearing cups. 4. Measure outside diameters of the bearing cups. Conversion joints and some OE applications use two different diameter bearing cups. 5. For conversion type universal joints repeat steps 1-4 for the other leg of the universal joint. Plastic Injection This style of lock-up was used in OEM Saginaw & AAM applications. When disassembled, OE joints are replaced with standard universal joint kits using round inside lock-up/snap rings. U-Bolt & Strap These two types of universal joints use round bearings secured in the yoke ears by a U-shaped bolt or strap that fits over the bearing cups. Measure in the same manner as round ISR or OSR. Round w/plate These universal joint kits use a flat plate welded to the back surface of the bearing cups. Two bolts retain each bearing in the yoke ears. Heavy Duty series using this style are 1610, 1710, 1760, and Basic reference dimensions required to identify each one are listed below. Measure between the inside surfaces of the retainer plates or across the outside surfaces of the yoke ears. LOCK-UP SERIES KIT NO Mechanics Design (Wing s) This universal joint design uses a block- or wingstyle bearing cup that locates in a flat flange-type yoke with a tongue and groove arrangement. Identify the bearing shape on the previous diagram. Some applications use two different bearing types. 1. Assemble bearing cups onto cross. 2. Clamp the bearings with C-clamp or vise. 3. Measure across two opposite bearings, in the same manner as round outside lock-up/snap ring to obtain the yoke lock-up. 4. Measure the cap holes (centerline to centerline) to identify the series. 5. Identify the proper cup ( Type) DWT, HWD, LWD, or LWT. iii
6 ecatalog The Neapco enhanced electronic catalog has been created using the latest cloud based technologies using the AAIA (Automotive Aftermarket Industry Association) ACES & PIES Standards. For more information please go to: Navigation to the ecatalog can be obtained by simply going to Neapco.com selecting the Aftermarket Site, then selecting Catalogs from the tab selection. Clicking on the Visit the Neapco ecatalog will open a new browser window and present three options: Search by # (Neapco, OEM, or Interchange) Search by Vehicle Application Lookup (Make, Year, Model) Search by Product Lookup ( Type) Since electronic catalogs are not bound by the format constraints of paper, it s important to think of these as product groupings. Specifically: Application Look-Up s having specific Y/M/M fitment information. Non-Application Look-Up - Full specifications & interchange. Updates Possibly the single biggest benefit of electronic lookup is that it has the capability of real time updates. What is displayed in the Neapco ecatalog is the exact same data that is being authored in REAL Time. What does that mean to the end user? When we add, change, or discontinue, a part number it changes instantly in the Neapco ecatalog. While print is not dead, those using print face a definite business disadvantage from those who use electronic information. Making the transition to the electronic information age is something we encourage everyone to consider. Featured Products - This screen will preview the latest and most innovative products offered by Neapco. Clicking on the link in one of the rotating products will display; Image; Buyers Guide; Specifications; and Interchange Information. In addition where available, Product Instructions, and Product Brochures may also be listed. iv
7 CONVERSION U-JOINTS BY PART NUMBER G G Type ROUND-ISR / WING-LWT / ISR / ISR ROUND-ISR / ISR / ISR / ISR / ISR / ISR / ISR / ISR / ISR ROUND-ISR None 1 None None # to to to to to to to to to to to to SPICER 1310 / SPICER 1330 SPICER 1110 / SPICER 1210 SPICER 1310 SPEC / SPICER 1310 SPICER 1000 / PTO ROCKWELL L6N MECHANICS 2RL / SPICER 1310 SPICER 1310 / CLEVELAND P SPICER 1310 / MECHANICS 2CL SPICER 1330 / DETROIT 7290 SPICER 1330 / DETROIT 7290 DETROIT 7260 / DETROIT 7290 SPICER 1330 / DETROIT 7260 SPICER 1350 / MECHANICS 3R SPICER 1350 / SPICER 1410 SPICER 1330 / MECHANICS 3R SPICER 1330 / MECHANICS 3R SPICER 1310 / MECHANICS 2 1/2 RL CLEVELAND P / MECHANICS 3R SPICER 1330 / SPICER 1350 SPICER 1310 / DETROIT 7260 SPICER 1410 / DETROIT 5380 CLEVELAND P / SPICER 1350 SPICER 1310WJ / SPICER 1310 SPICER 1310 / MECHANICS 3R SPICER 1310 / DETROIT 7290 SAGINAW S44 / DETROIT 7290 SPICER 1310 / SPICER
8 CONVERSION U-JOINTS BY PART NUMBER Type / WING-HWD / WING-HWD 2 Cross # to to SPICER 1810 / MECHANICS 9C SPICER 1880 / MECHANICS 9C 2
9 LISTING BY ROUND BEARING CAPS NPL Type # None NEAPCO 0400 STEERING ROUND-ISR None NISSAN, TOYOTA 1 TOYOTA PTO METRIC B&P SERIES 1 ROUND-ISR 1 ROUND-ISR 1 MAZDA PTO METRIC WALTERSCHEID SERIES 2100 NISSAN, SUBARU, TOYOTA staked replacement PTO METRIC B&P SERIES 2 ROUND-ISR None SPICER 1000 STEERING ROUND-ISR SPICER 1000 ROUND-ISR None SPICER 1000 ROUND-ISR 1 SPICER 1000 ROUND-ISR None SPICER SPICER 1100 ROUND-ISR ROUND-ISR to SPICER 1000 / PTO ROCKWELL L6N BMW, MAZDA staked replacement ROUND-ISR PTO ROCKWELL L6N ROUND-ISR MECHANICS 1 1/2 RL ROUND-ISR 1 MAZDA ROUND-ISR 1 NISSAN, SUBARU 1 DODGE, MITSUBISHI, SUZUKI CHRYSLER, MITSUBISHI ROUND-ISR / WING-LWT / WING-LWD MECHANICS 2 CRL MECHANICS 2CRL ROUND-ISR SPICER 1110 ROUND-ISR PTO NEAPCO
10 LISTING BY ROUND BEARING CAPS G Type # ROUND-ISR MECHANICS 2RL to to SPICER 1110 / SPICER 1210 MECHANICS 2RL / SPICER 1310 ROUND-ISR MECHANICS 2RL ROUND-ISR 1 TOYOTA ROUND-ISR None TOYOTA 1 SUZUKI ROUND-ISR 1 KIA / WING-LWT SPICER 1310 / MECHANICS 2CL ROUND-ISR None SPICER 1210WJ ROUND-ISR 1 INFINITI, NISSAN ROUND-ISR SPICER 1310WJ ROUND-ISR 1 SPICER 1310WJ to SPICER 1310WJ / SPICER 1310 ROUND-ISR SPICER 1310 SPEC to SPICER 1310 SPEC / SPICER 1310 CLEVELAND S SPICER SATURN PTO METRIC WALTERSCHEID SERIES I CLEVELAND P PTO METRIC B&P SERIES 4 1 SPICER 1300 HYUNDAI SPICER 1310 None SPICER
11 LISTING BY ROUND BEARING CAPS G G G G Type # 1 SPICER 1310 SPICER 1280 SPICER 1310 CV SPICER 1330 None SPICER SPICER 1330 / ISR / ISR SPICER 1310 / SPICER 1330 SPICER 1310 / DETROIT 7260 SPICER 1330 / DETROIT 7260 CLEVELAND S CLEVELAND P None CLEVELAND P / ISR / ISR / ISR / ISR / ISR / ISR / ISR None None SPICER 1310 / MECHANICS 2 1/2 RL SPICER 1310 / MECHANICS 3R SPICER 1310 / CLEVELAND P SPICER 1330 / MECHANICS 3R SPICER 1330 / MECHANICS 3R SPICER 1310 / DETROIT 7290 SPICER 1330 / DETROIT 7290 SPICER 1330 / DETROIT 7290 SPICER 1310 / SPICER 1350 SPICER 1330 / SPICER 1350 WALTERSCHEID 2480 ROUND-ISR PTO ROCKWELL L12N None VISTEON 1330XC None VISTEON SPECIAL staked replacement 5
12 LISTING BY ROUND BEARING CAPS G G Type # ROUND-ISR 1 DETROIT 7260 ROUND-ISR DETROIT 7260 ROUND-ISR DETROIT 7260 W / U-BOLTS ROUND-ISR to ROUND-ISR 1 KIA DETROIT 7260 / DETROIT 7290 ROUND-ISR INFINITI, NISSAN, SUBARU ROUND-ISR 1 FORD, MAZDA TOYOTA ROUND-ISR / WING-LWT ROUND-ISR / WING-LWT MECHANICS 3CRL MECHANICS 4C ROUND-ISR 1 MECHANICS 2 1/2 RL ROUND-ISR 1 MECHANICS 3R ROUND-ISR MECHANICS 3R ROUND-ISR None MECHANICS 3R ROUND-ISR None MECHANICS 3R ROUND-ISR to to to to CLEVELAND P / MECHANICS 3R SAGINAW S44 / DETROIT 7290 SPICER 1350 / MECHANICS 3R CLEVELAND P / SPICER 1350 ROUND-ISR DETROIT 7290 ROUND-ISR None DETROIT 7290 PTO ROCKWELL L14N ROUND-ISR 1 TOYOTA ROUND-ISR ROUND-ISR 1 ACURA, ISUZU ROUND-ISR MITSUBISHI ACURA, CHEVROLET, HONDA, ISUZU 6
13 LISTING BY ROUND BEARING CAPS G G Type # ROUND-ISR None SPICER 1310WJ ROUND-ISR 1 SPICER 1310WJ ROUND-ISR None SPICER SPL30WJ / 1350WJ CLEVELAND R CLEVELAND O PTO METRIC B&P SERIES 5 None AAM SPICER 1350 SPICER 1350 None SPICER 1350 PTO METRIC B&P SERIES 6 None to None AAM 1415 SPICER 1410 None SPICER 1410 / ISR to SPICER 1350 / SPICER 1410 ROUND-ISR DETROIT 5380 SPICER 1410 / DETROIT 5380 PTO ROCKWELL L35N 2 PTO ROCKWELL L35N 1 PTO NEAPCO 2200 & N44 CV ROUND-ISR KIA ROUND-ISR TOYOTA PTO METRIC WALTERSCHEID SERIES 2400 WALTERSCHEID 2580 ROUND-ISR ROCKWELL 44R ROUND-ISR / MECHANICS 5C 7
14 LISTING BY ROUND BEARING CAPS G G Q Type ROUND-ISR / # MECHANICS 6C ROUND-ISR MECHANICS 6C ROUND-ISR None AAM 1485WJ ROUND-ISR AAM1555WJ ROUND-ISR SPICER SPL70WJ / 1550WJ ROUND-ISR SPICER 1480WJ None AAM 1485 None SPICER 1480 & PTO NEAPCO 2600 SPICER 1480 & NEAPCO 2600 PTO CLEVELAND D None AAM 1555 SPICER 1550 None SPICER 1550 CLEVELAND U PTO METRIC B&P SERIES 7 PTO METRIC B&P SERIES 8 PTO METRIC WALTERSCHEID SERIES 2500 ROCKWELL 55N SPICER 1500 PTO METRIC B&P SERIES 9 PTO METRIC B&P SERIES 10 SPICER SPL90 & SPL100 SPICER Cross SPICER Cross SPICER 1610 / ROUND 2 Cross SPICER 1610 HALF ROUND 8
15 LISTING BY ROUND BEARING CAPS Q Q Q Q Q Q Q Type / ROUND / WING-HWD # 2 Cross SPICER 1610 HALF ROUND 2 Cross to Cross SPICER Cross SPICER 1710 / ROUND / ROUND SPICER 1810 / MECHANICS 9C 2 Cross SPICER 1710 HALF ROUND 2 Cross SPICER 1710 HALF ROUND 2 Cross SPICER 1760 / ROUND 2 Cross SPICER 1760 HALF ROUND 2 Cross SPICER Cross SPICER 1810 / ROUND / ROUND / ROUND 2 Cross SPICER 1810 HALF ROUND 2 Cross SPICER 1810 HALF ROUND 2 Cross SPICER 1760 HALF ROUND 2 Cross SPICER 1760 / WING-RPL HWD / WING-RPL HWD LOCK / ROUND / WING-HWD None MERITOR RPL 20 None MERITOR RPL 25 SPICER SPL to Cross SPICER Cross SPICER 1800 LOCK / ROUND SPICER 1880 / MECHANICS 9C SPICER SPL250 9
16 WING AND BLOCK STYLE BY SIZE Type ROUND-ISR / WING-LWT # MECHANICS 2 CRL WING-LWT MECHANICS 2CL WING-LWD / WING-LWT MECHANICS 2CL WING-LWD MECHANICS 2CL / WING-LWT / WING-LWD ROUND-ISR / WING-LWT SPICER 1310 / MECHANICS 2CL MECHANICS 2CRL MECHANICS 3CRL WING-LWT MECHANICS 3CL WING-LWT / WING-HWD WING-LWT / WING-LWD MECHANICS 3C MECHANICS 4C WING-LWT MECHANICS 4C WING-LWT / WING-HWD MECHANICS 4C WING-HWD MECHANICS 4C ROUND-ISR / WING-LWT ROUND-ISR / MECHANICS 4C MECHANICS 5C MECHANICS 5C WING-HWD / MECHANICS 5C WING-HWD MECHANICS 5C WING-HWD None MECHANICS 5C ROUND-ISR / WING-HWD / MECHANICS 6C MECHANICS 6C WING-HWD MECHANICS 6C MECHANICS 6C WING-HWD None MECHANICS 6C WING-HWD / / None / MECHANICS 5C special W/ hole in cross MECHANICS 6C / MECHANICS 7C 10
17 WING AND BLOCK STYLE BY SIZE Type / WING-HWD / # MECHANICS 6C / MECHANICS 7C WING-HWD ROCKWELL 58WB ROCKWELL 58WB-1 WING-HWD / ROCKWELL 58WB-2 WING-HWD MECHANICS 7C MECHANICS 7C WING-HWD / MECHANICS 7C WING-HWD None MECHANICS 7C WING-HWD MECHANICS 8C MECHANICS 8C / WING-HWD MECHANICS 8C WING-HWD None MECHANICS 8C / WING-RPL HWD / WING-RPL HWD / WING-HWD / WING-HWD None MERITOR RPL 20 None MERITOR RPL 25 2 Cross to to SPICER 1810 / MECHANICS 9C SPICER 1880 / MECHANICS 9C WING-LWT None MECHANICS 8.5C WING-LWT / WING-HWD None MECHANICS 8.5C WING-HWD MECHANICS 8.5C WING-LWT MECHANICS 9C WING-HWD MECHANICS 9C WING-LWT / WING-HWD MECHANICS 9C WING-HWD MECHANICS 10.5C WING-HWD None MECHANICS 11C WING-HWD MECHANICS 10C WING-LWD MECHANICS 10C 11
18 WING AND BLOCK STYLE BY SIZE Type # WING-HWD None MECHANICS 10C WING-HWD None MECHANICS 15C 12
19 SIZE IDENTIFICATION BY PART NUMBER G NPL Type # 1 SPICER TOYOTA ROUND-ISR None TOYOTA ROUND-ISR 1 TOYOTA TOYOTA ROUND-ISR 1 NISSAN, SUBARU ROUND-ISR None NISSAN, TOYOTA ROUND-ISR INFINITI, NISSAN, SUBARU ROUND-ISR MECHANICS 1 1/2 RL ROUND-ISR None SPICER 1000 STEERING ROUND-ISR SPICER 1110 PTO METRIC B&P SERIES SPICER 1310 None SPICER SPICER 1310 ROUND-ISR SPICER 1000 ROUND-ISR None SPICER 1000 ROUND-ISR 1 SPICER 1000 ROUND-ISR None SPICER 1000 SPICER 1310 / SPICER 1330 ROUND-ISR SPICER 1310WJ ROUND-ISR 1 SPICER 1310WJ SPICER 1280 PTO METRIC B&P SERIES to SPICER 1110 / SPICER 1210 SPICER 1310 CV 13
20 SIZE IDENTIFICATION BY PART NUMBER Type # ROUND-ISR None SPICER 1310WJ ROUND-ISR 1 SPICER 1310WJ 1 SPICER 1100 PTO METRIC WALTERSCHEID SERIES I ROUND-ISR SPICER 1310 SPEC PTO METRIC B&P SERIES 4 ROUND-ISR ROUND-ISR 1 1 ROUND-ISR 1 KIA 1 SATURN 1 SPICER to NISSAN, SUBARU, TOYOTA staked replacement BMW, MAZDA staked replacement SPICER 1310 SPEC / SPICER 1310 ROUND-ISR 1 INFINITI, NISSAN None NEAPCO 0400 STEERING ROUND-ISR to SPICER 1000 / PTO ROCKWELL L6N PTO METRIC WALTERSCHEID SERIES 2100 ROUND-ISR PTO ROCKWELL L12N ROUND-ISR PTO ROCKWELL L6N CHRYSLER, MITSUBISHI 1 DODGE, MITSUBISHI, SUZUKI ROUND-ISR 1 MAZDA ROUND-ISR 1 MAZDA ROUND-ISR 1 FORD, MAZDA ROUND-ISR 1 TOYOTA ROUND-ISR PTO NEAPCO 1800 PTO ROCKWELL L14N 14
21 SIZE IDENTIFICATION BY PART NUMBER G G G Type ROUND-ISR / WING-LWT # MECHANICS 2 CRL WING-LWT MECHANICS 2CL ROUND-ISR MECHANICS 2RL WING-LWD / WING-LWT MECHANICS 2CL WING-LWD MECHANICS 2CL ROUND-ISR MECHANICS 2RL to MECHANICS 2RL / SPICER 1310 CLEVELAND S SPICER 1310 / CLEVELAND P ROUND-ISR 1 MECHANICS 2 1/2 RL CLEVELAND S ROUND-ISR 1 DETROIT 7260 ROUND-ISR DETROIT 7260 ROUND-ISR TOYOTA 1 SPICER 1350 SPICER 1350 None SPICER 1350 SPICER 1410 None SPICER 1410 ROUND-ISR None SPICER SPL30WJ / 1350WJ ROUND-ISR MITSUBISHI / WING-LWT SPICER 1310 / MECHANICS 2CL ROUND-ISR 1 ACURA, ISUZU / ISR / ISR None 1 SUZUKI SPICER 1330 / DETROIT 7290 SPICER 1330 / DETROIT
22 SIZE IDENTIFICATION BY PART NUMBER G G G Type ROUND-ISR # ACURA, CHEVROLET, HONDA, ISUZU ROUND-ISR None SPICER 1210WJ ROUND-ISR 1 KIA ROUND-ISR KIA HYUNDAI PTO METRIC B&P SERIES 5 ROUND-ISR / ISR to to DETROIT 7260 / DETROIT 7290 SPICER 1330 / DETROIT 7260 SPICER 1350 / MECHANICS 3R ROUND-ISR DETROIT 7290 ROUND-ISR None DETROIT 7290 CLEVELAND P None AAM 1355 / ISR / ISR None None to SPICER 1350 / SPICER 1410 SPICER 1330 / MECHANICS 3R SPICER 1330 / MECHANICS 3R PTO ROCKWELL L35N 2 PTO ROCKWELL L35N PTO METRIC WALTERSCHEID SERIES PTO NEAPCO 2200 & N44 CV WALTERSCHEID 2480 / ISR / WING-LWD SPICER 1310 / MECHANICS 2 1/2 RL MECHANICS 2CRL ROUND-ISR 1 MECHANICS 3R ROUND-ISR MECHANICS 3R ROUND-ISR None MECHANICS 3R 16
23 SIZE IDENTIFICATION BY PART NUMBER G G G G Type / ISR ROUND-ISR / WING-LWT # to CLEVELAND P / MECHANICS 3R SPICER 1330 / SPICER 1350 SPICER 1310 / DETROIT MECHANICS 3CRL ROUND-ISR None MECHANICS 3R / ISR to SPICER 1330 None SPICER SPICER 1330 SPICER 1410 / DETROIT 5380 None VISTEON 1330XC CLEVELAND P None CLEVELAND P to to CLEVELAND P / SPICER 1350 SPICER 1310WJ / SPICER 1310 CLEVELAND R ROUND-ISR DETROIT 7260 W / U-BOLTS CLEVELAND O ROUND-ISR ROCKWELL 44R ROCKWELL 55N SPICER 1500 ROUND-ISR DETROIT 5380 SPICER 1550 None SPICER 1550 ROUND-ISR SPICER SPL70WJ / 1550WJ None SPICER 1480 & PTO NEAPCO 2600 SPICER 1480 & NEAPCO 2600 PTO 17
24 SIZE IDENTIFICATION BY PART NUMBER Type # ROUND-ISR SPICER 1480WJ None AAM 1415 ROUND-ISR None AAM 1485WJ None AAM 1485 None VISTEON SPECIAL staked replacement PTO METRIC B&P SERIES 6 PTO METRIC B&P SERIES 7 PTO METRIC B&P SERIES 8 PTO METRIC B&P SERIES 9 PTO METRIC B&P SERIES 10 None AAM 1555 ROUND-ISR AAM1555WJ PTO METRIC WALTERSCHEID SERIES 2500 WALTERSCHEID 2580 / ISR / ISR ROUND-ISR to SPICER 1310 / MECHANICS 3R SPICER 1310 / DETROIT 7290 SAGINAW S44 / DETROIT 7290 SPICER 1310 / SPICER 1350 WING-LWT MECHANICS 3CL WING-LWT / WING-HWD WING-LWT / WING-LWD MECHANICS 3C MECHANICS 4C WING-LWT MECHANICS 4C WING-LWT / WING-HWD MECHANICS 4C WING-HWD MECHANICS 4C ROUND-ISR / WING-LWT ROUND-ISR / MECHANICS 4C MECHANICS 5C 18
25 SIZE IDENTIFICATION BY PART NUMBER Q Q Q Type # CLEVELAND D CLEVELAND U SPICER Cross SPICER Cross SPICER 1610 / ROUND / ROUND 2 Cross SPICER 1610 HALF ROUND 2 Cross SPICER 1610 HALF ROUND SPICER SPL90 & SPL MECHANICS 5C WING-HWD / MECHANICS 5C WING-HWD MECHANICS 5C WING-HWD None MECHANICS 5C WING-HWD ROCKWELL 58WB ROCKWELL 58WB-1 WING-HWD / ROUND-ISR / WING-HWD / ROCKWELL 58WB MECHANICS 6C MECHANICS 6C ROUND-ISR MECHANICS 6C WING-HWD MECHANICS 6C MECHANICS 6C / / WING-HWD / / MECHANICS 6C / MECHANICS 7C MECHANICS 6C / MECHANICS 7C WING-HWD None MECHANICS 6C 2 Cross SPICER Cross SPICER 1710 WING-HWD / None MECHANICS 5C special W/ hole in cross 19
26 SIZE IDENTIFICATION BY PART NUMBER Q Q Q Q Q Type # WING-HWD MECHANICS 7C MECHANICS 7C WING-HWD / MECHANICS 7C WING-HWD None MECHANICS 7C / WING-RPL HWD / WING-RPL HWD None MERITOR RPL 20 None MERITOR RPL 25 2 Cross SPICER Cross SPICER Cross SPICER Cross SPICER 1880 / WING-HWD / WING-HWD 2 Cross to to Cross SPICER Cross SPICER 1760 / ROUND / ROUND / ROUND / ROUND / ROUND / ROUND SPICER 1810 / MECHANICS 9C SPICER 1880 / MECHANICS 9C 2 Cross SPICER 1710 HALF ROUND 2 Cross SPICER 1710 HALF ROUND 2 Cross SPICER 1810 HALF ROUND 2 Cross SPICER 1810 HALF ROUND 2 Cross SPICER 1760 HALF ROUND 2 Cross SPICER 1760 HALF ROUND WING-HWD MECHANICS 10C WING-LWD MECHANICS 10C WING-HWD MECHANICS 10.5C WING-HWD None MECHANICS 10C LOCK / ROUND SPICER SPL170 WING-HWD None MECHANICS 11C 20
27 SIZE IDENTIFICATION BY PART NUMBER Type LOCK / ROUND # SPICER SPL250 WING-HWD None MECHANICS 15C WING-HWD MECHANICS 8C MECHANICS 8C / WING-HWD MECHANICS 8C WING-LWT None MECHANICS 8.5C WING-LWT / WING-HWD None MECHANICS 8.5C WING-HWD MECHANICS 8.5C WING-HWD None MECHANICS 8C WING-LWT MECHANICS 9C WING-HWD MECHANICS 9C WING-LWT / WING-HWD MECHANICS 9C 21
28 B A A E D C U-Bolt Dimensions B D E C Strap Dimensions A OD U-BOLT KIT DIMENSIONAL SIZE LISTING B Length C CL-CL D Thread Size E Thread Length Torque (Ft-Lbs.) BEARING STRAP KIT DIMENSIONAL SIZE LISTING Series / / / / / / / FORD 1310/1330 OD A CL-CL B Width C Hole D Thread Size E Under Head Torque (Ft-Lbs.) Series / / /1410 (SPR) / /1410 (GM) / / / /1330 (SPR) / / /1330 (GM) / R / N X SPL90 / / / /1760/ M12x N X SPL M12x N X SPL250 SPECIAL APPLICATION SNAP RINGS Optional snap rings for tight or loose lockup fit in some applications Universal Joint Kit Snap Ring (25 per box) (.089 undersize, standard =.095) Use (.089 undersize, standard =.095) Use (.062 oversize, standard =.059) Use (.062 oversize, standard =.059) Use (converts 1000 series to 0600 series) Use
29 UNIVERSAL JOINT KIT and HARDWARE LISTING Standard Universal Joint part numbers with optional versions and associated hardware Silver U-Joint Gold U-Joint U-Joint Strap U-Bolt G G G G G G G G G G G G N X N X N X 23
30 COMMON UNIVERSAL JOINTS BY SERIES DRIVELINE NEAPCO NEAPCO NEAPCO NEAPCO SERIES QSP 1 SILVER 2 SILVER 2 GOLD 3 Value Line Greasable No Maint. No Maint G 1310 (wheel joint) / / /3R / G 1330/ G 1330/3R G 1330/ P G 3R G 7290 G G 1350/3R / G G 1480 (wheel joint) (wheel joint) G Q Half Round Q Q Half Round Q Q Half Round Q Q Half Round Q /9C /9C SPL90, SPL SPL SPL QSP - Quality Service 2 SILVER - Standard Universal Joint 3 GOLD - Premium Quality Universal Joint 24
31 QSP Universal Joints Neapco quality with value based pricing Universal Joint Series Industry leading competitive price point Meets Neapco design and manufacturing standards Backed by Neapco s superior customer service Available for immediate shipment Covered by Neapco s Limited Warranty - 1 Year / Unlimited Mileage
32 Neapco Components, LLC Box 399, 740 Queen Street Pottstown, PA Innovative Drivetrain Solutions
Universal Joint Dimensional Reference Guide
Catalog No. UJ2017D Weatherly No. 090 2017 Supersedes Cat. No. UJ2016D Universal Joint Dimensional Reference Guide Innovative Drivetrain Solutions GOLD Light Duty Universal Joints Neapco Premium Quality
More informationIMPORTANT INFORMATION
IMPORTANT INFORMATION Issue Date 2018 Catalog 4x4QR 2018 Please read the following important information before using this Catalog: ALWAYS CONSULT AND REVIEW THE ORIGINAL MANUFACTURERS INSTRUCTION MANUAL(S)
More informationU-JOINT IDENTIFICATION
U-JOINT IDENTIFICATION Bearing Quantity Type Page 4 Grooved Round Bearings..................................... 2 4 Plain Round Bearings....................................... 4 2 Grooved Round Bearings
More informationCommon U-Joint Kits By Series. Spicer OE Kit (Triple Lip Non-Greaseable)
Common U-Joint Kits By Driveline Service Kit (Greaseable) Kit (Triple Lip Non-Greaseable) Life Kit (Greaseable) Life Kit (Non-Greaseable) 1210 5-443X 5-736X 1310/SPL22 5-153X/5-1200X 5-810X / SPL22-7X
More informationApp. Qty. Part No. CONVERSION SETS CS ,153,594 HEAD BOLTS ES ,598,224 ES ,292,431 HEAD GASKETS HEAD SETS MS ,407,056
FPRS 302 Summer 2018 REPAIRSOLUTIONS THE PARTS YOU NEED, WHEN YOU NEED THEM ES72390 CONVERSION SETS TOP 100 TRENDING GASKET SETS With 100 years of dedication to the repair environment, you can trust Fel-Pro
More informationDRIVELINE COMPONENTS CATALOG CENTER YOKES, TUBE YOKES AND BALL STUD TUBE YOKES
DRIVELINE COMPONENTS CATALOG CENTER YOKES, TUBE YOKES AND BALL STUD TUBE YOKES JUNE 2008 Supersedes Section 5, Dated November 2005 Change Log: 10/2/08 pg 5 140-28-17 centerline to point of weld dimension
More informationDRIVELINE DRIVELINE CATALOGUE SUITE. SERVICES AUSTRALIA the underbody & power transmission specialists
DRIVELINE SERVICES AUSTRALIA the underbody & power transmission specialists Driveline Services Australia Pty Ltd (Driveline) is an underbody and power transmission parts and services supplier specialising
More informationSingle-Position Detent Clutch DC Series. (i) MTY (81) MEX (55) QRO (442)
Single-Position Detent Clutch DC Series (i) FORM NO. L-2017-A-001 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More informationAPPLICATION GUIDE 2014
Wheel Lug Nuts & Caps APPLICATION GUIDE 2014 FMSI AUTOMOTIVE HARDWARE 1070 HERITAGE ROAD, BURLINGTON, ONTARIO, CANADA L7L4X9 Wheel Lug Nuts & Caps WHEEL LUG NUTS & CAPS 3800 3801 3802 3803 3804 3805 3806
More informationAEROMOTIVE Part # Subaru Fuel Rails for Top Feed Injectors WRX & STI INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14134 Subaru Fuel Rails for Top Feed Injectors 02-14 WRX & 07-14 STI INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems
More information203 TRANSFER CASE CONVERSION
203 TRANSFER CASE CONVERSION PN:501 OUR FOUR TRANSFER CASE WEDGES REPLACE THE SPIDER GEARS AND CONNECT THE PLANETARY GEAR AND REAR OUTPUT SHAFT MAKING ONE UNIT. SIMILAR IN DESIGN & FUNCTION TO THE BEST
More information2018 SKN New Product Listing
INDUSTRY SKN 3541 3541 PAD CLIP - WIRE FORM (CHYRSLER, EAGLE, JEEP) 4755 4755 CLEVIS PIN - WIRE FORM (AUDI, BMW, CHEVY,DODGE, FORD, HONDA, HYUNDAI, TOTOTA, VW) 4906 4906 PAD CLIP - WIRE FORM (FORD IMPORTS,
More informationDRIVELINE PRODUCTS CATALOG 4 VOL
DRIVELINE PRODUCTS CATALOG 4 VOL TIME TESTED. INDUSTRY TRUSTED. THAT S SONNAX. Sonnax is an industry leader in the cutting-edge design, manufacture and distribution of the highest quality products to the
More informationHeavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series
Revised 11/2009 Heavy Duty Front-Drive Steer Axles MX-140 and MX-160 Series Catalog PB-0349 Strength Power Speed Agility MERITOR PARTS. RIGHT FROM THE START. TABLE OF CONTENTS MX-17/19/21-140 and MX-21/23-160
More informationAEROMOTIVE Part # Subaru STI Fuel Rail Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14137 04-06 Subaru STI Fuel Rail Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend
More information18670, INSTALLATION INSTRUCTIONS
18670, 19871 INSTALLATION INSTRUCTIONS WARNING! The fuel system is under pressure. Do not open the fuel system until the pressure has been relieved. Refer to the appropriate vehicle service manual for
More informationDISC BRAKE CALIPER TOOL SET
DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from
More informationDRIVELINE PRODUCTS CATALOG 5 VOL
DRIVELINE PRODUCTS CATALOG 5 VOL TIME TESTED. INDUSTRY TRUSTED. THAT S SONNAX. Sonnax is an industry leader in the cutting-edge design, manufacture and distribution of the highest quality products to the
More informationAEROMOTIVE Part # Subaru Fuel Rails for Top Feed Injectors WRX & STI INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14135 Subaru Fuel Rails for Top Feed Injectors 02-14 WRX & 07-14 STI INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems
More informationWenger Corporation 2011 Printed in USA 08/11 Part #158E006-02
Owner s Manual Conductor s Podium COntents Warranty.......................................... 2 Important User Information............................ 2 General....................................... 2
More informationDAP-625S and DAP-875S
AIR CHAMP PRODUCTS DAP-625S and DAP-875S (i) FORM NO. L-20078-B-0501 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject
More information4-Ton Electric Log Splitter
4-Ton Electric Log Splitter Questions: Support@Powrkraft.com PK65556 2 18ga. @ 20ft, 16ga. @ 50ft, 14 ga. @ 75ft. 12ga @ 100ft, 10ga @ 200ft These are minimum cord requirements. 13-16 Model Number 65556
More informationAEROMOTIVE Part # Subaru STI Fuel Rails INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14136 04-06 Subaru STI Fuel Rails INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend
More informationRichmond Gear Ring & Pinion Application Guide
Table of Contents Richmond Gear Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our performance products are the result of a continuous research
More informationBC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO
MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this
More informationStraight-Bore Clutch LSCC-32, 44, 54
Straight-Bore Clutch LSCC-32, 44, 54 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical
More informationAEROMOTIVE Part # & Mustang Stealth Fuel Tank w/fuel pump INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 18685 &18686 86-98.5 Mustang Stealth Fuel Tank w/fuel pump INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair
More informationElgin Hydraulic Clutch-Brake ECB-240, Product Number FORM NO. L F FORM NO. L F-0704
Elgin Hydraulic Clutch-Brake ECB-20, Product Number 96225 FORM NO. L-20283-F-070 1 FORM NO. L-20283-F-070 In accordance with Nexen s established policy of constant product improvement, the specifications
More informationFlo-Way. Measure Granular or Powdered Material. Stand Alone or Connect to Other Devices for Blending. Used by Successful Producers World-Wide
Flo-Way R Solids Impact Flow Meter Measure Granular or Powdered Material Stand Alone or Connect to Other Devices for Blending Used by Successful Producers World-Wide Visit our website: www.beltwayscales.com
More informationGRADE 3 TUBULAR LOCKSETS INDEX:
GRADE 3 TUBULAR LOCKSETS INDEX: Applications...Ad:1 Standard Features...Ad:1 Functions...Ad:1 How to Order - Nomenclature...Ad:2 Grade 3 D360 Series Residential Deadbolt Applications...Ad:3 Standard Features...Ad:3
More information11202 INSTALLATION INSTRUCTIONS
11202 INSTALLATION INSTRUCTIONS WARNING! The fuel system may be under pressure. Do not open the fuel system until any pressure has been relieved. The enclosed Aeromotive fuel pump utilizes an o-ring sealed
More informationAEROMOTIVE Part # Ford 5.4L Shelby GT500 Mustang INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14144 07 Ford 5.4L Shelby GT500 Mustang INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend
More informationHPx-JDx3-xx HARNESS INSTALLATION
HPx-JDx3-xx HARNESS INSTALLATION Conversion Manual 09040106b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760
More informationAGCO. Corn Header Manual d HEADSIGHT.COM
AGCO Corn Header Manual 09020401d HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationModel AS-RC3260 TV Cart. Rolling Cart for Audio Mount System & Flat Panel TVs
Model AS-RC3260 TV Cart Rolling Cart for Audio Mount System & Flat Panel TVs GETTING STARTED Introduction Congratulations on the purchase of your new Helios AS-RC3260 Rolling Cart. For maximum benefit,
More informationInstructions and Parts List 3M-Matic P/N Infeed/Exit Conveyor Attachment, 1.2 Meter
Instructions and Parts List TM 3M-Matic P/N 78-8069-3971-2 Infeed/Exit Conveyor Attachment, 1.2 Meter Type 19100 The Infeed/Exit Conveyor, 1.2 Meter, has been designed and tested to be used only with 3M-Matic
More information18660, 18661, & Stealth Fuel Cell INSTALLATION INSTRUCTIONS
18660, 18661, 18662 & 18663 Stealth Fuel Cell INSTALLATION INSTRUCTIONS WARNING! The fuel system is under pressure. Do not open the fuel system until the pressure has been relieved. Refer to the appropriate
More informationLevel Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions
Level Alert Model 2000 Multi-Switch Liquid Level Sensor Assembly and Installation Instructions Kit Form Each unit is provided in kit form with step-by-step instructions, making it extremely easy to custom
More informationAEROMOTIVE Part # L 4V Fuel Rails INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14130 5.0L 4V Fuel Rails INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend that this
More informationFord F250/F350 Super Duty 2x4, 4x4 ( ) Part #SSR Installation Instructions
Ford F250/F350 Super Duty 2x4, 4x4 (1999-2010) Part #SSR-101-47-1 Installation Instructions Passenger side (driver s side similar) Parts List Item Part # Description Quant. A 512006 Frame bracket 2 B 512007
More informationGM Specification Annual Test Data
GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing
More informationInjectorServiceKitCatalog
InjectorServiceKitCatalog GREENTUNE AUTOMOTIVE PRODUCTS LLC is a leading Distribution company specializing in automotive & light truck replacement parts and ASNU gasoline fuel injector diagnostic & cleaning
More informationTPMS. Service Parts and Tools. Sensors Service Kits Tools Dynamic. Toll-Free Sales. TPMS Tech Support.
TPMS Service Parts and Tools Sensors Service Kits Tools Rev. 01/2016 TPMS Solutions Toll-Free Sales 1-888-571-1141 TPMS Tech Support 1-800-805-4058 www.dynamicautosupplies.com www.dynamictpms.com TPMS
More informationWoolich Racing. Bike Harness Installation Instructions Suzuki Harness Type 4a GSX1300R (Hayabusa)
Woolich Racing Bike Harness Installation Instructions Suzuki Harness Type 4a 2013+ GSX1300R (Hayabusa) 1) Introduction To connect your Woolich Racing product to the ECU ( Engine Control Unit or computer)
More informationDODGE CUMMINS GDP Twin CP-3 Big Line Kit
Installation Manual P/N 0306-TCP3 2003-07 DODGE CUMMINS GDP Twin CP-3 Big Line Kit Installation Instructions P/N 0306-TCP3 GDP Twin CP-3 Big Line Kit Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING
More informationAEROMOTIVE Part # GM LS1 Fuel Rails INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14106 GM LS1 Fuel Rails INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend that this
More informationMega-Rail System Installation
Installation Manual Mega-Rail System P/N 030767-MRS 2003-2007 DODGE CUMMINS Mega-Rail System Installation Installation Instructions GDP 03-07 Mega-Rail System P/N 030767-MRS PLEASE READ ALL INSTRUCTIONS
More informationRzeppa Factory Replacement CV Joint
1 Rzeppa Factory Replacement CV Joint www.teraflex.com #1744014 Important Notes: Prior to beginning this or any installation read these instructions to familiarize yourself with the required steps and
More informationAEROMOTIVE Part # & Mustang 5.0L Stealth Fuel System Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 18653 & 18654 86-93 Mustang 5.0L Stealth Fuel System Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures.
More informationTransmission Guardian
Transmission Guardian Thank you for purchasing the Transmission Guardian from Bowler Performance Transmissions. We hope you are 100 percent satisfied with your purchase and if for any reason you are not,
More informationTRUCK PRODUCT LINE A DIVISION OF DAKOTA FLUID POWER, INC.
TRUCK PRODUCT LINE 2210 Main Ave W, West Fargo, ND 58078 877.410.7072 www.epgdivision.com A DIVISION OF DAKOTA FLUID POWER, INC. ABOUT US About: Engineered Products Group (EPG), a division of Dakota Fluid
More informationAGCO Conversion Manual a HEADSIGHT.COM
AGCO 3300 Conversion Manual 09040404a HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationCORN HEADER MANUAL: CNH PRE-2012
CORN HEADER MANUAL: CNH PRE-2012 09020201c HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email:
More informationAEROMOTIVE Part # Ford 5.0 Liter INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14101 86-98 Ford 5.0 Liter INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend that this
More informationGM Specification Annual Test Data
GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing
More informationMEX (55) QRO (442) Web Controls
Web Controls SINGLE AND DUAL ROTOR TENSION CONTROL BRAKES MODELS:,,,, AND INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS Read this manual carefully, making full use of its explanations and instructions.
More informationProactive Positioning Seeking Opportunity in a Low Growth Environment
AUTOMOTIVE Proactive Positioning Seeking Opportunity in a Low Growth Environment 8 September 2016 Detroit Mike Jackson, Senior Executive, North America, Vehicle Production Forecasting +1-248-465-2833,
More informationSHERWOOD VALVE CHLORINE GAS PRODUCTS
SHERWOOD VALVE CHLORINE GAS PRODUCTS A History of Quality and Innovation For nearly a century, Sherwood has been the world s leading provider of system-critical compressed gas solutions serving blue-chip
More informationDODGE DIESEL KIT DODGE DIESEL KIT
69120 2009-2013 DODGE 2500 8 DIESEL KIT 2009-2012 DODGE 3500 8 DIESEL KIT Heavy Duty Long Arm Construction For Superior Ride Quality And Travel Lower Arms Constructed Of 1.75 DOM Tubing W/ Urethane Bushing
More informationUsers Guide for Ac-sync
Problem solved. Users Guide for Ac-sync Thank you for choosing Anywhere Cart! The AC-SYNC is designed to sync, charge and store 1-36 ipads or tablets. Adjustable device divider bays allow fitment of any
More informationFRONT DRIVELINE MODIFICATION MAY BE NECESSARY!!!!
INSTALLATION INSTRUCTIONS FOR 2009 DODGE 2500/3500 4WD & 1500 Mega Cab 6 SUSPENSION SYSTEM PART NUMBER 7206 Requires the following parts (sold separately) for a complete installation: Front Coil Spring
More informationDODGE CUMMINS GDP Big Line Kit
Installation Manual P/N 9852BLK 1998.5-2002 DODGE CUMMINS GDP Big Line Kit Installation Instructions P/N 9852BLK GDP Big Line Kit Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION
More informationDUAL WIDEBAND AIR/FUEL RATIO GAUGE Product Numbers: GS-W702W_Dual, GS-C702W_Dual, GS-T702W_Dual
Installation Instructions Tech Support: 856.768.8300 TechSupport@GlowShiftGauges.com DUAL WIDEBAND AIR/FUEL RATIO GAUGE Product Numbers: GS-W702W_Dual, GS-C702W_Dual, GS-T702W_Dual (1) Gauge (2) Controllers
More informationipd Catback Oval Tube Exhaust System S60R ( ), V70R ( ) ipd #120056
PI-408 02/12 Dedicated to improving vehicle fun, safety & performance Installation Instructions *PI408* ipd Catback Oval Tube Exhaust System S60R (2004-2007), V70R (2004-2007) ipd #120056 SUGGESTED TOOLS
More informationFCB-450, LCB-600, MCB-800
AIR CHAMP PRODUCTS User Manual FCB-450, LCB-600, MCB-800 Clutch-Brakes (i) In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are
More informationPowerMax Diesel Upgrade For Cummins Engines
PowerMax Diesel Upgrade For Cummins Engines 00.5-007.5 Dodge Ram With Cummins 5.9L Item 3 4 5 6 7 8 9 0 3 4 5 6 7 8 Parts List Description Turbocharger Ancillary kit 773069- (includes) Installation Instructions
More information'64-72 Chevelle/ A Body Rear Coilover Conversion Kit
February 3, 2014 '64-72 Chevelle/ A Body Rear Coilover Conversion Kit Includes instructions for Currie Brand Axles The following instructions are intended for professional installers and are guidelines
More information210, 220, 230 and 240 Series 2 Speed Single Axles Catalog PB-92126
Revised 11/02 210, 220, 230 and 240 Series 2 Speed Single Axles Catalog PB-92126 Strength Power Speed Agility MERITOR PARTS. RIGHT FROM THE START. HOW TO USE THIS CATALOG There are four basic carriers
More informationSlip Yoke Eliminator Kit For NP231 Part Number 52231
Slip Yoke Eliminator Kit For NP231 Part Number 52231 KIT CONTAINS: Rear Output Housing w/ plug Rear Output Seal Main Output Shaft Snap Ring for Speedometer Gear-QTY: 2 Snap Ring for Mode Gear Rear Output
More information18318 INSTALLATION INSTRUCTIONS CHEVROLET IMPALA
18318 INSTALLATION INSTRUCTIONS 65-66 CHEVROLET IMPALA The enclosed Aeromotive fuel tank/pump assembly utilizes an o-ring sealed AN-06 style feed, return and vent ports. These ports seal with o-rings;
More informationDODGE CUMMINS MK-2 Micro-Kleen System
Installation Manual P/N MK20306 2003-07 DODGE CUMMINS MK-2 Micro-Kleen System Installation Instructions P/N MK20306 2 Micron Fuel Filter Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION
More informationPlease visit for the latest version of these installation instructions.
Please visit www.blueox.com for the latest version of these installation instructions. BX2409 2009-18 Dodge Ram 1500 Sport/ST/Laramie Limited Please read BOTH these and the General Information sheet prior
More informationCHRYSLER TOWN AND COUNTRY OWNERS MANUAL 2012
02 November, 2017 CHRYSLER TOWN AND COUNTRY OWNERS MANUAL 2012 Document Filetype: PDF 173.47 KB 0 CHRYSLER TOWN AND COUNTRY OWNERS MANUAL 2012 Once more, we here provide you not only in this kind of chrysler
More informationReference Manual FM-200 Series
Flush Manifold A/P FOR LIQUID LAUNDRY SUPPLY SYSTEMS Reference Manual FM-200 Series Copyright 2004 Nova Controls, Inc. P/N 20-07941-00 Rev. C i P/N 20-07941-00 Rev. C ii P/N 20-07941-00 Rev. C 1 Description
More informationAEROMOTIVE Part # Generic EFI Fuel System INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 17150 Generic EFI Fuel System INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend that
More informationDriveline Components Catalog Flange Yokes
Driveline Components Catalog Flange Yokes J300P-2 March 2012 Supersedes Section 2 Dated January 2008 Find the flange yokes that are built to your vehicle s original equipment specifications, based on the
More informationEMISSION CONTROL WARRANTY STATEMENT
EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board, U.S. EPA and Zenith Power Products LLC (ZPP) are pleased to explain the emission control system
More informationMechanical Spiral Sensor
Installation Manual Model 6005-1 Mechanical Spiral Sensor No part of this instruction manual may be reproduced, by any means, without the written consent of Geokon, Inc. The information contained herein
More informationEVERYTHING You Need to Succeed with TPMS
EVERYTHING You Need to Succeed with TPMS PRODUCTS TRAINING SUPPORT Makers of Professional TPMS Products and Solutions TPMS REPLACEMENT PARTS KITS & VALVE STEMS 17-2AK 17-0AK 17-72AK 17-0390 17-039 17-0397
More informationLEXION SINGLE FUNCTION HYDRAULIC VALVE KIT
LEXION SINGLE FUNCTION HYDRAULIC VALVE KIT Conversion Manual 09062010b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022
More information9 Drive Train. Clutch Assemblies Clutch Parts Driveshaft Drive Axle. Parts for Trucks, Trailers & Buses. Proven, reliable and always innovative.
Parts for Trucks, Trailers & Buses 9 Drive Train Proven, reliable and always innovative. TRP provides aftermarket parts for all makes of commercial equipment including trucks, trailers, buses, engines
More informationAccess Tonneau Cover. back to home page. Latching System. The Access Roll-up Cover... Added Security. Access Roll-up Cover Features:
Access Tonneau Cover model series: 2011-ATC *Free ground shipping within the lower 48 United States! U.S. Rack,Inc. : 1.888.877.2257 back to home page The Access Tonneau Cover mounts with NO Drilling.
More informationDana-Engineered for the Aftermarket
DRAFT Dana-Engineered for the Aftermarket Spicer Select TM commercial vehicle aftermarket drivetrain products by Dana Parts Built with Purpose. We are born innovators who make products that are purpose-built
More informationRzeppa Factory Replacement CV Joint
1 Rzeppa Factory Replacement CV Joint #1744014 JK Rzeppa CV Factory Replacement Kit Important Notes: Prior to beginning this or any installation read these instructions to familiarize yourself with the
More information12110BESTPLACE CINCINNATI,OHIO PHONE FAX
12110BESTPLACE CINCINNATI,OHIO 45241 PHONE 1-800-226-2238 FAX 1-513-326-5427 www.venturo.com BLANK TABLE OF CONTENTS - 25100-PH(E) OUTRIGGERS - INSTALLATION MANUAL DESCRIPTION INSTALLATION SECTION 01 OUTRIGGER
More informationoro-tek support Application Data oem relearn and Tpms pairing procedures new product release notifications dealer locator system TPMS Trouble Shooting
SPRING 2013 Oro-Tek offers a comprehensive website for application data which includes OEM relearn and TPMS pairing procedures. oro-tek support We have built the industry s most comprehensive online Application
More informationBMK-30. Heavy-Duty By-Pass Filtration System Installation and Servicing Instructions
BMK-30 Heavy-Duty By-Pass Filtration System Installation and Servicing Instructions IMPORTANT NOTICE Read all instructions completely before attempting to install this unit. Improper installation could
More informationALL NEW TECNA FULLY AUTOMATIC SPOT WELDER FEATURING SMART PLUS
Search this website HOME PRODUCTS! COMPANY PROFILE TECNA SUPPORT CONTACT ALL NEW TECNA 19000 FULLY AUTOMATIC SPOT WELDER FEATURING SMART PLUS TECNA s latest 19000 Automatic Spot Welder with SMART PLUS
More informationWoolich Racing. Bike Harness Installation Instructions Hayabusa Gen 2 (08+)
Woolich Racing Bike Harness Installation Instructions Hayabusa Gen 2 (08+) 1) Introduction To connect your Woolich Racing product to the ECU ( Engine Control Unit or computer) in your bike you need to
More informationAEROMOTIVE Part # /2 4.6L SOHC Ford Fuel Rail Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14125 96-98 1/2 4.6L SOHC Ford Fuel Rail Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We
More informationRead and follow all instructions. Safety can only be ensured if the walker is assembled and operated according to these instructions.
Aqua Walker 9889 Garrymore Ln Missoula, MT 59808 888-687-3552 +1-406-549-0769 www.aquacreek.com Manual PART #: F-605UW 300 LB. [136 kg] MAXIMUM WEIGHT CAPACITY MANDATORY LEAVE THIS MANUAL WITH WALKER OWNER
More informationp.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.
p.t.o. Slip clutch 65517 Installation Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read
More informationUniversal Mud Flaps PRODUCT INSTALLATION GUIDE. Part # Important Notes: These instructions are for two methods of installation.
PRODUCT INSTALLATION GUIDE Universal Mud Flaps Important Notes: These instructions are for two methods of installation. Prior to beginning this or any installation read these instructions to familiarize
More informationAir-Boss VP Intake Plenum
Installation Manual P/N 98502-ABIP 98.5-02 DODGE CUMMINS Air-Boss VP Intake Plenum Installation Instructions P/N 98502-ABIP GDP Air-Boss VP Plenum Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING
More informationPlease visit for the latest version of these installation instructions.
Please visit www.blueox.com for the latest version of these installation instructions. BX2414 2019 Ram 1500 (Includes Rebel) (No Classic) Attachment Tab Height: 17 Serial Number Attachment Tab Width: 38.5
More information3M-MaticTM. Tape Edge Fold Kit. Instructions and Parts List. For Use On: AccuGlide TM STD Upper and lower Taping Heads. Purpose of Attachment
Instructions and Parts List 3M-MaticTM Tape Edge Fold Kit For Use On: AccuGlide TM STD Upper and lower Taping Heads Kit Part Number Fits 78-8095-4854-4 2 Inch Upper Head 78-8095-4855-1 2 Inch Lower Head
More informationClutch Products Worldwide Leader in OE Clutch Manufacturing. Medium Duty Kits Picture Guide. Bringing OE to the Aftermarket
Part No. CAT-PAS2009 October 2009 2009-10 Worldwide Leader in OE Clutch Manufacturing Clutch Products Medium Duty Kits Picture Guide Valeo Transmissions 310 E Street Hampton, VA 23661 USA Valeo Hotline:
More informationL DODGE CUMMINS Maximizer System
Installation Manual P/N 07509MAX 2007.5-09 6.7L DODGE CUMMINS Maximizer System Installation Instructions P/N 07509MAX GDP Big Line Kit Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION
More informationService Parts Instructions
Issued 07-00 Service Parts Instructions RPL Series Permalube TM Generation II Driveline Removal and Installation WARNING To prevent serious eye injury, always wear safe eye protection when you perform
More informationPlease visit for the latest version of these installation instructions.
Please visit www.blueox.com for the latest version of these installation instructions. BX1986 Please read BOTH these and the General Information sheet prior to installing or operating this equipment. 1.
More information