High Speed 5-Axis Mill-Turn Machining Center
|
|
- Job Craig
- 5 years ago
- Views:
Transcription
1 MT4U SERIES
2 CONTENTS MT4U series 1-2 MT4U series 3-4 Spindle system 5 Application sample 6 Expanded tool management 7 Two axes table (4/5 axis) 8 ATC system 9-1 Easy operation Coolant system & Chip management 13 Technical data 14 Standard / Option accessories Layout We build machines in a hybrid way High Speed 5-Axis Mill-Turn Machining Center SIEMENS = (S) HEIDENHAIN = (T) Motor power MT4U Spindle code 12C 15C X / Y / Z (kw) A / C (kw) S 2.7 / 2.7 / 4.9 T 5.1 / 5.4 / 5.4 S 3.3 / 2 (Turning mode) T 4.5 / 2 1
3 1 Milling spindle 12, min -1 15, min kw / 79 Nm (S6-4%) 2 Turning table (C axis / S2) Spindle index & lock function Spindle is capable of indexing at any degree to satisfy multi-edge turning tool application. Spindle locking (35 Nm) function for turning tool cutting. 1 min -1 / 1,2 min kw / 36 Nm (S6-4%) Drum Brake system by the oil pressure supply Hydraulic Unit 1 2 Drum Brake system 24* 3 W=5 kg Ø4 Note: * While using the max. tool length as 28mm, the height of workpiece is limited as 24mm. 2
4 Spindle system Main milling spindle Transmission: Coupling Speed range: 12,min -1 Grease packed system Speed range: 15,min -1 (opt.) Re-grease system MC-4.2 Coupling Motor type: 1PH817 MC-4.3R Coupling Motor type: 1PH817 TORQUE Power POWER TORQUE Power POWER Nm 12, min -1 kw Nm 15, min -1 kw Torque (Y+ ) Torque (Y+ ) Nm (S6-25%) Nm (S6-25%) kW (S6-25%) kW (S6-25%) Nm (S6-4%) Nm (S6-4%) 16.5kW (S6-4%) 16.5kW (S6-4%) Nm (S6-6%) Nm (S6-6%) kW (S6-6%) 13.2kW (S6-6%) 6 53Nm (S1) Nm (S1) kW (S1) kW (S1) Coupling Motor type: QAN2UH Coupling Motor type: QAN2UH TORQUE Nm Power POWER TORQUE Power Torque 12, min -1 kw Nm Torque 15, min -1 POWER kw Nm (S6-25%) Nm (S6-25%) Nm (S6-4%) 89.4Nm (S6-4%) 17kW (S6-25%) kW (S6-25%) Nm (S6-6%) 14kW (S6-4%) Nm (S6-6%) 14kW (S6-4%) Nm (S1) 12.5kW (S6-6%) Nm (S1) 12.5kW (S6-6%) kW (S1) 1kW (S1)
5 The lubrication concept illustration of grease supply Bearing luburication hole Clean grease Old grease Thermal solution 1 Motor mounting block cooling 2 The spindle cooling system uses oil cooling and water jacket device to give the right amount of coolant to all the bearings Headstock thermal control X,Y & Z 1μm 1 2 4
6 Two axes table (4/5 axis) Main turning spindle MT4U Work envelope Rotary Axis (C-axis) C axis = Milling mode S2 = Turning mode Tilting Axis (A-axis) Max. swing (mm) Ø4 Table load capacity (kg) 5 Allowable loading inertia (kg.m 2 ).64 Maximum R.P.M (min -1 ) C axis =1 S2 = 1,2 25 Indexing accuracy (sec.) 2 (1) 2 (1) Repeatability (sec.) 6 (4) 8 (4) Clamping torque (Nm) 7 14 Allowable cutting torque (Nm) S1/S6-4% 271 (466rpm) / 357 (373rpm) - Note: ( ) with absolute rotary encoder. Torque motor advantages Cooling circuit High speed High dynamics High accuracy Optimal speed control Compact design Wear free Manual 3-Jaw chuck (opt.) Torque and mechanical power Nm(5%) 18 Torque [Nm] Nm(4%) 271Nm(1%) Mechanical power [kw] Speed [rpm] 5
7 ATC system Tool Specification Turning tool: HSK T63 Milling tool: HSK A63 Magazine positions: 48 (std.) 6 (opt.) 12 Dual magazine (opt.) Tool changer Tool to tool time : 1.6 sec.* Chip to chip time : 6 sec.* Max. tool diameter: Ø76.2 mm Max. tool length: 28 mm Max. tool weight: 7 kg Note:* At 6 Hz 6
8 Expanded tool management Machine NC system Tool measuring system: Laser: milling tool Mechanical: Turning tool 7
9 Milling Turning 8
10 Easy operation a Max. size when operator door open 87 mm b From center of table to operator door 65 mm c Swivel type operation panel & Hand held remote MPG b b c a 9
11 Application sample 1
12 Coolant system & Chip management a a Coolant tank: 3 Liter b Coolant through spindle: 2 bar c Nozzle coolant: 3.5 bar d Wash down: 3.5 bar e Wash gun b c e 11
13 d 12
14 Control: (T) = HEIDENHAIN (S) = SIEMENS Technical data MT4U Spindle code 12C 15C Work range Table size (mm) Travel X / Y / Z (mm) 41 / 61 / 51 A (degree) +3 ~ -12 C / S2 (degree) 36 (Continuous) Max. swing (mm) Ø4 Ø32 Table surface to spindle nose (mm) 2 ~ 53 Spindle nose to tilting center at 9 2 ~ 53 Max. work piece size (mm) Ø4 x 3 Table load capacity (kg) 5 Allowable loading inertia (kg m²).64 Feed drive Feed force X / Y / Z (N) 11,3 / 13,7 / 13,7 (T) 6,283 / 6,283 / 14,137 (S) Rapid movement X / Y / Z (m / min) 36 / 36 / 36 A / C (min -1 ) A=25 / C=1 (Turning mode S=1,2) Acceleration X / Y / Z (m/s 2 ) 5 / 4 / 5 (T) 4 / 3.5 / 4 (S) Dia. & pitch of the ball screw (mm) Ø45 / P=12 / 12 / 12 Accuracy Positioning / Repeatability ISO /.4 JIS 6338 (3 mm) ±.3 / ±.2 VDI /.4 Main spindle Spindle taper HSK T63 (HSK A63) Max. spindle speed 12, 15, Spindle base speed T / S 1,5 / 2, 1,5 / 2, Spindle power output kw (S6-4%) T / S 14 / / 16.5 Spindle torque output Nm (S6-4%) T / S 89.4 / / 79 Spindle transmission Coupling Spindle bearing diameter (mm) Ø8 Tool changer Tool selection Random pocket, bidirectional selection Magazine positions 48 (std.) 6 / 12 (opt.) Max. tool diameter (mm) 76.2 Max. tool diameter w/o adjacent tool (mm) 125 Max. tool length (mm) 28 Max. tool weight (kg) 7 Tool to tool time (sec.) (1) 1.6 Chip to chip time (sec.) (1) 6 Coolant system Coolant tank capacity (Liter) 3 Pump capacity (1) - Nozzle coolant 75L / min., 3.5 bar - Through spindle coolant 25L / min, 2 bar - Wash down 75L / min., 3.5 bar Machine size Height (mm) 3,18 Floor space W x D (mm) 3,211 x 2,91 Net Weight (kg) Connections Main power Power consumption (KVA) Note: (1) At 6Hz 7,36 (48ATC) 22V / 6Hz or 4V / 5Hz 47 (T) 43.1 (S) 13
15 Standard / Option accessories = Standard = Option = N/A MT4U Spindle code 12C 15C HEIDENHAIN TNC64 SIEMENS84D Oil chiller 12, min -1 coupling 15, min -1 coupling 48 position tool magazine 6 position tool magazine 12 position tool magazine (Dual magazine) Balance tooling for spindle warm up ATC auto door Manual 3-Jaw chuck Work probe receive* Work probe Thermal compensation Tool length / breakage measurement (Laser) + for both milling & turning tool Hydraulic through pallet (3 ports) X / Y / Z linear scale Rotary encoder on A axes & C axes (RCN238) Coolant through ball screw 2 bar through spindle coolant Coolant wash gun Coolant wash down External chip conveyor (hinge type) Cutter air blast Oil-mist collector Bag filtration Filtration unit Documentation** Work light Machine status light CE & EMC *** Note: * Receive OMI-2T ** By CD-ROM version. *** Standard for EU area. - Machine specification might be different form the catalogue if there any specification update. 14
16 Layout Cutting area and interference 2 Z Travel 51 2 Z Travel R R Y travel Y travel 61 Installation dimension Filtration unit (opt.) 3886 Transformer (6ATC) 291 (48ATC) Bag Filtration (opt.) R598 R985 R682 R645 R468 R388 Mist collector (opt.) Z Travel X Travel 41 Door open Y Travel 61 Filtration unit (opt.)
17 35-12 R Ø4 Max.work piece size W=5kg X travel 41 Table dimension Applicable tools A DETAIL Ø32 2-M1X1.5P 5 5 B D tool median point distance tool weight 5 MOMENT=D*B ( 9.85N-m) 5 4-M12X1.75P PCDØ (Oil) 2(Oil) Please ref. page 13 A 3-M6X1PX12L Ø1X1.4L ±.5 PCDØ16 A 3(air) 76.2 D Ø125 A DETAIL (3 port) B Ø5H7 Ø5 1.5 HSK A63 & HSK T63 (ICTM, ISO /4) A-A SECTION 16
18 We build machines in a hybrid way - Very classic craftsmanship combined with most advanced modern equipments in a clean environment... QUASER MACHINE TOOLS, INC. Address: No. 3, Gong 6th Rd., Youshih Industrial Park, Dajia Dist, Taichung City 437, Taiwan Tel: Fax: sales@qmt.com.tw Web: QUASER EUROPE TECHNIC CENTER - SWITZERLAND Address: Unterlettenstrasse 16, CH Widnau Switzerland Tel: Mobile phone: qe@qmt.com.tw KUNSHAN QUASER MACHINE TOOLS, INC. Address: (B) No. 287, Kangzhuang Road, Zhoushi Town, Kunshan City, Jiangsu,P.R. China Tel: Fax: qmtc@qmt.com.tw QUASER AMERICA MACHINE TOOLS INC. Address: 349 Southcross Boulevard,Rock Hill, SC, 2973, UNITED STATES Tel: Fax: qa@qmt.com.tw 17
19 18
20 QUASER MACHINE TOOLS, INC. Address: No. 3, Gong 6th Rd., Youshih Industrial Park, Dajia Dist, Taichung City 437, Taiwan Tel: Fax: sales@qmt.com.tw Web: QUASER EUROPE TECHNIC CENTER - SWITZERLAND Address: Unterlettenstrasse 16, CH Widnau Switzerland Tel: Mobile phone: qe@qmt.com.tw KUNSHAN QUASER MACHINE TOOLS, INC. Address: (B) No. 287, Kangzhuang Road, Zhoushi Town, Kunshan City, Jiangsu,P.R. China Tel: Fax: qmtc@qmt.com.tw QUASER AMERICA MACHINE TOOLS INC. Address: 349 Southcross Boulevard,Rock Hill, SC, 2973, UNITED STATES Tel: Fax: qa@qmt.com.tw Fold here for filing! R TEL: MT-E-9/6/217
UX series. Value model UX300. Offer max. value for small parts up to Ø400 x 352 mm / 100 kg. Motor FANUC = F SIEMENS = S HEIDENHAIN = X / Y / Z (kw) F
UX SERIES UX series Value model UX300 Offer max. value for small parts up to Ø400 x 352 mm / 100 kg FANUC = F SIEMENS = S HEIDENHAIN = Motor T UX300 5 axes Spindle code 9B 12B 15C 18A 24A X / Y / Z (kw)
More informationTraveling Column Five Axes Machining
MK5U SERIES CONTENTS 03-04 Traveling Column Five Axes Machining Center 05-06 Spindle system 07 ATC system 08 Accuracy & B/C Axis 09-10 Coolant system & Chip management 11-12 Easy operation 13-14 Technical
More informationUX series. Value model UX300. Offer max. value for small parts up to Ø400 x 300 mm / 100 kg. Motor SIEMENS = S HEIDENHAIN = H.
UX SERIES UX series Value model UX300 Offer max. value for small parts up to Ø400 x 300 mm / 100 kg SIEMENS = S HEIDENHAIN = H Motor UX300 9B 12B 15C 24A X / Y / Z (kw) H 5.1 / 5.4 / 5.4 S A / C (kw) H
More informationMV2 SERIES: MV204 / MV205 MV214 / MV215 MV234 / MV235
MV2 SERIES CONTENTS 03-04 MV2 SERIES 05-08 Unique spindle technology 09-10 ATC system 11-12 Coolant system & chip management 13-14 Easy operation 15-16 MV204 & MV214 technical data 17-18 MV234 technical
More informationMV2 SERIES: MV204 / MV205 MV214 (MV204_L) MV215 (MV205_L) MV234 / MV235
MV2 SERIES CONTENTS 03-04 MV2 SERIES 05-08 Unique spindle technology 09-10 ATC system 11-12 Coolant system & chip management 13-14 Easy operation 15-16 MV204 & MV214 technical data 17-18 MV234 technical
More informationHigh speed VMC with automatic pallet changer for series production
MV154APC SERIES High speed VMC with automatic pallet changer for series production 1 One piece base and rigid frame structure to meet 60 m/min rapid with 7 / 7 / 6 m/s 2 Large tool capacity up to 60 2
More informationMV2 SERIES MV2-E-23/10/2018 QUASER MACHINE TOOLS, INC. QUASER EUROPE TECHNIC CENTER - SWITZERLAND KUNSHAN QUASER MACHINE TOOLS, INC.
R MV2 SERIES QUSER MCHINE TOOLS, INC. ddress: No. 3, Gong 6th Rd., Youshih Industrial Park, Dajia Dist, Taichung City 437, Taiwan Tel: +886 4 26821277 Fax: +886 4 26822045 E-mail: sales@qmt.com.tw eb:
More information- Largest working capacity in a compact foot print - Highest productivity - Highest reliability
MK63S SERIES MK63S series is our third generation of MK6S production vertical machining center; Backed up 675 units world wide installations in the past 2 years (1994-214), the MK63S series achieves: -
More informationMV1 SERIES. here for filing! QUASER MACHINE TOOLS, INC. QUASER EUROPE TECHNIC CENTER - SWITZERLAND KUNSHAN QUASER MACHINE TOOLS, INC.
MV1 SERIES QUSER MCHINE TOOLS, INC. ddress: No., Gong th Rd., Youshih Industrial Park, Dajia Dist, Taichung City 7, Taiwan Tel: + 7 Fax: + 5 E-mail: sales@qmt.com.tw Web: www.quaser.com QUSER EUROPE TECHNIC
More informationwe cut faster Vertical Machining Center MV204II series
we cut faster Vertical Machining Center MV24II series From : October 24 we cut faster Maximum capacity and performance in a very compact working envelope 1 OUTLING MV24II series P & PD models FANUC 18iM-B
More information5-Axis & 5-Face High Speed Machining Center
TM TM 5-Axis & 5-Face High Speed Machining Center BUFFALO MACHINERY CO., LTD. 5, Lane 31, Der Sheng Road, Ta Ya, Taichung City, Taiwan, R.O.C. P.O. Box 32, Ta Ya, Taichung City, Taiwan R.O.C. Tel: -4-37
More information5-Axis Machining Centers
5-Axis Machining Centers Heavy Cutting U Series 5-axis Machining Centers High Speed Double Column 2 www.takumi.com.tw Machine shown with optional equipment +886 4 2681 1215 High-Rigidity + High-Precision
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More information5-Axis & 5-Face High Speed Machining Center TM TM
TM TM 5-Axis & 5-Face High Speed Machining Center Aug. 212 V2/5 odel V2/5 is a high speed machining center which is equipped with 5-axis or 5-face milling capability. The machine is perfect for a wide
More informationDUGARD. DUGARD Machine. Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre. Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Model V20/5 is a
More informationBARON-MAX VB Series Vertical Machining Centers
BARON-MAX VB Series Vertical Machining Centers Heavy Duty Performance The Baron Max VB series offers versatility and value. Ideal for production and job shop applications, the rugged construction allow
More informationSERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling
DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012
More informationBARON-MAX VL Range Vertical Machining Centers
BARON-MAX VL Range Vertical Machining Centers Linear Guide ways VL Range Higher Efficiency, Rigid Structure, Excellent and Stable Accuracy At a Very Affordable Pricing Cost Effective, High Performance
More informationHMC SERIES HORIZONTAL MACHINING CENTER KAO FONG MACHINERY CO., LTD. Since 1968
HMC SERIES HORIZONTAL MACHINING CENTER KAO FONG MACHINERY CO., LTD. Since 1968 HMC SERIES HORIZONTAL MACHINING CENTER HMC-500 Axes travel (X,Y,Z) Maximum pallet load Spindle nose 720 x 650 x 650 mm 800
More informationMSeries. High Rigidity Vertical Machining Centers
MSeries High Rigidity Vertical Machining Centers M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
More informationThe leader of CNC-technology and services worldwide
Line UP The leader of CNC-technology and services worldwide Introduction MOTEC also offers all kinds of industrial services including the distribution of spare parts, consultation for engineering applications
More informationMB SERIES High Precision Horizontal Boring Mills
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationTrust And Reliability. Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.
Trust And Reliability Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. V33/V43 FEED SYSTEM Heavy duty linear ways are imported from Germany, which are well balanced,
More informationCopyright EXTRON All rights reserved E-M-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
More informationFive-axis universal milling machine DMU 75 monoblock High tech as standard Five-axis simultaneous an excellent price.
www.dmgmoriseiki.com Five-axis universal milling machine DMU 75 monoblock High tech as standard Five-axis simultaneous machining at an excellent price. DMU 75 monoblock Top features for five-axis simultaneous
More informationLSeries. High Speed Vertical Machining Center
LSeries High Speed Vertical Machining Center L Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
More informationMAXXMILL Vertical milling center for 5-sided machining MILLING
MAXXMILL 400 630 750 Vertical milling center for 5-sided machining MILLING EMCO-WORLD.COM MAXXMILL 400 Compact vertic 1 MACHINE BED Machine bed and slide systems made of solid welded steel and cast iron
More informationBT50 AWEA MECHANTRONIC CO., LTD.
Dimensions Table Dimensions Boring Concentricity 0.025 mm / 1,500 mm 700 700 1,600 A 0.025 1500 0.030 A 1,800 T T-slot 型槽尺寸圖 Dimensions A 100 7x @ 200 = 1,400 "A" 45 22 H9 16 + 2 16 37+3 1.5 Tool Shank
More informationMB SERIES High Precision Horizontal Boring Mills
MACHINING CENTERS by MACHINING CENTERS by YAMA SEIKI USA, INC. 5788 Schaefer Ave., Chino, CA 91710 TEL : ( 909 ) 628-5568 ( 888 ) 976-6789 FAX : ( 909 ) 628-5556 Web : www.yamaseiki.com E-mail : info@yamaseiki.com
More informationLINEAR MOTOR SERIES 5-Axis Double column machine center
Focus High Speed & 5-axis LINEAR MOTOR SERIES 5-Axis Double column machine center KEN ICHI MACHINE CO., LTD LINEAR MOTOR SERIES 5-Axis Double column machine center Suitable for Automotive plastic mold
More informationBARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range
More informationSERIES M SERIES. High Rigidity Vertical Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Vertical Machining Center
M SERIES Vertical Machining enter EXELLENT TRUSTWORTHY ON AND ON YIH HUAN MAHINERY INDUSTRY O., LTD 407 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +88-4-239-331 FAX : +88-4-239-00 Web
More informationHigh Performance High Rigidity Vertical Machining Center
High Performance High Rigidity Vertical Machining Center NMV Series Vertical Machining Center is the latest developed machine for efficient production industries; widely adopted in automobile, aerospace,
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More informationKAFO B / BMC SERIES SPECIFICATION
B-2015 BMC-2015 B-3015 BMC-3015 B-2616 BMC-2616 B-3116 BMC-3116 B-4116 BMC-4116 X-axis (left and right) 2100 3100 2600 3100 4100 Y-axis (back and forth) 1500 1600 Z-axis (up and down) 800 900 (*1100) Distance
More informationNXV1020A. High Performance Vertical Machining Center
STANDARD FEATURES POWERFUL 25 HP IDD SPINDLE BBT TYPE HIGH SPEED 24 TOOL SWING-ARM ATC SYSTEM MXP 200FA WITH MANUAL GUIDE I 60 DEGREE CHIP AUGER 12,000 RPM MAXIMUM SPINDLE SPEED 40mm THK NR TYPE LINEAR
More informationSmall Footprint Big Cutting Capacity
Just what you need! Small Footprint Big Cutting Capacity 1000 Y Axis Travel FOCUS SEIKI CORP No.11, Lane 181, Da Ming Road, Shengang Dist.,Taichung City, 42949 Taiwan Tel: +886-4-2529-5611 Fax:+886-4-2529-5613
More informationCenters. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine
BARON-MA AX VL Range Vertical Machining Centers Linear Guide ways VL Rangee Powerful Machines, Simple User Friendly Programming Att a Very Affordable Pricing Cost Effective, High Performance Vertical Machining
More information[ means: Standing up to any challenge. FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer
[ E[M]CONOMY] means: Standing up to any challenge. FAMUP MC and MCP Vertical CNC machining centers with and without pallet changer MC 120-60 and MC 75-50 The EMCO FAMUP MC series. One of the most advanced
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-194 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationAWEA MECHANTRONIC CO., LTD. AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationVCF 850 series. Multi-purpose machining center VCF 850 VCF 850SR VCF 850L VCF 850LSR
VCF 85 series Multi-purpose machining center VCF 85 series VCF 85 VCF 85SR VCF 85L VCF 85LSR VCF 85 series Multi purpose moving column vertical machining center, providing a 3m long machining area and
More informationCopyright EXTRON All rights reserved E-EH-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
More informationMVB MVB SERIES WELE MECHATRONIC CO., LTD. Moving Cross-Rail type Double Column Machining Center WELE MECHATRONIC CO., LTD
Rheinland Rheinland www.tuv.com www.tuv.com ID:9105046137 ID:9105046137 We lead the way by a new business model ISO 9001 ISO 14001 2011 TAMI Supreme Excellence Award WELE MECHATRONIC CO., LTD (http : //www.welegroup.com)
More informationSimultaneous 5-axis vertical machining centres FLEXI
FLEXI An innovative project at the top of technology. New FLEXI vertical machining centres, with movable worktable and 5 simultaneous axes, have an universal field of application and they are conceived
More informationUniport CNC Portal Machining Centre with Pallet Changer.
Uniport 6 CNC Portal Machining Centre with Pallet Changer www.unisign.nl Uniport 6 UNISIGN The economical solution to flexible manufacturing! Since the introduction of the UNIPORT portal machining centres,
More informationPerformance LargeSeries
Performance LargeSeries Vertical Machining Centers jyoti.co.in Performance Large Series Vertical Machining Center OVERVIEW VMC Large Series have versatility and capacity to carryout maximum range of jobs,
More informationU1000 U1000 SUPER RT1000 CNC BED TYPE MILLING MACHINE CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE
U1000 U1000 SUPER CNC BED TYPE MILLING MACHINE RT1000 CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE U1000 CNC Bed Type Milling Machine Machine Specification U1000 Surface 2500 / 3100 / 3600 900(1050)mm
More informationQP-L Series. High Speed Vertical Machining Center QP1620-L 2033-L 2040-L QP2440-L 2560-L
QP-L Series High Speed Vertical Machining Center QP16-L 33-L 40-L QP2440-L 2560-L QP-L Series High-Speed Vertical Machining Center Engineered for Precision, High Accuracy and Efficiency. Machine Features
More informationBRIDGEPORT GX-SERIES 5-Axis & 5-Face Vertical Machining Centers
MILLING BRIDGEPORT GX-SERIES 5-Axis & 5-Face Vertical Machining Centers www.bpt.com GX 250 5-Axis & GX250 5F Bridgeport s Machining Center are high-quality machine tools designed for leading edge machining
More informationYCM NH450A MAIN FEATURES
YCM NH450A MAIN FEATURES POWERFUL 15,000 RPM 30HP (BIG-PLUS SPINDLE) BBT-40 TAPER SPINDLE DELIVERS 148FT/LBS [200NM] OF TORQUE, WITH 430PSI THROUGH SPINDLE COOLANT SYSTEM MICRO OIL-AIR LUBRICATION FOR
More informationKMH KMH500/630/800 HORIZONTAL MACHINING CENTERS
KMH KMH5/63/8 HORIZONTAL MACHINING CENTERS Index Cover 1 Cover Contents 2-3 Table of Contents Structure 4-5 Design & Rigidity 6 3 Axis Transmission 7 Ballscrew Cooling System 8-9 ATC Unit Maintenance &
More informationstructure and components
HSP 643 WAVE structure and components Vertical motion double drive system, two linear rollers high preloaded guideways, two guideways in a composite material. Vertical Z motion supported by two pneumatic
More informationPERFORMANCE : VALUE PRODUCT CATALOG
PERFORMANCE : VALUE by P a r t n e r s i n P r o d u c t i v i t y PRODUCT CATALOG PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools
More informationHigh performances 5 Axis Machining Center Performance Technology Power Accuracy
High performances 5 Axis Machining Center Performance Technology Power Accuracy Powerfull, Rapid, Accurate 5 Axes High Performance Machining Center The MX multifunction machining center offers high levels
More informationMEGA5 Series Bridge Type 5-Axis Machining Centers
Series ridge Type 5-xis Machining enters WE MEHNTRONI O., LT. HEQURTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FX : +886-3-588-5194 Website :
More informationSeries. High performances Vertical machining centre. Performance Technology Power Accuracy
Series High performances Vertical machining centre Performance Technology Power Accuracy Series Powerful, Rapid, Accurate High Performance Vertical Machining Centre The VX range of vertical machining centres
More informationModel Travel CV-7A CVM-7A CV-7B CVM-7B CV-9A CVM-9A CV-9B CVM-9B CV-11A CVM-11A X-axis (left and right) mm Y-axis (back and
Model Travel CV-7A CVM-7A CV-7B CVM-7B CV-9A CVM-9A CV-9B CVM-9B CV-11A CVM-11A X-axis (left and right) 760 760 900 900 1100 1100 Y-axis (back and front) 520 520 600 600 600 600 Z-axis (up and down) 480
More informationGMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
More information5X VMC categories definition
MCU-5X Technology level (average) 5X VMC categories definition Workpiece size (average) Small Medium Large X-Large Work 600 x h 400 800 x h 500 1000 x h 600 1200 x h 700 Table 400 mm 600 mm 800 mm 1000
More informationHIGH EFFICIENCY VERTICAL MACHINING CENTER
HIGH EFFICIENCY VERTICAL MACHINING CENTER 1 HIGH EFFICIENCY VERTICAL MACHINING CENTER FACE MILL S45C Steel Material Removal Rate 138cc/min. EV1020A is built with state-of-the-art technology in mind and
More informationMTAB. MACHINING CENTERS
MTAB www.mtabcnc.com MACHINING CENTERS OVERVIEW MTAB's Vertical Machining Center is designed to flex with the customers' manufacturing demands and requirements. The machines are high performance systems,
More informationVMC-95/116 VERTICAL MACHINING CENTER
VMC-95/116 VERTICAL MACHINING CENTER VMC-95/116 VERTICAL MACHINING CENTER All three axes have a hardened box-way design. In addition, the spindle headstock, column, saddle, base, and table are all made
More informationVMC-127H VERTICAL MACHINING CENTER
VMC-127H HIGH-SPEED & HIGH-ACCURACY VERTICAL MACHINING CENTER VMC-127H VERTICAL MACHINING CENTER Most Suitable for Needing High Speed, High Cutting Rate, High Rigidity Mold Making Industry X & Y axes has
More informationFive-Axis Vertical Machining Center GT Series
Trust & Technology Five-Axis Vertical Machining Center GT Series www.tongtai.com.tw 1 GT Series Five-Axis Vertical Machining Center GT Series Main specification Spindle GT-5 GT-63 GT-8E GT-8 15, rpm built-in
More informationFAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer.
EMCO FAMUP CNC machining centers Vertical milling centers FAMUP MC-Line/MCX-Line With integrated pallet changer FAMUP MCP-Line Vertical milling machines FAMUP MMV-Line EMCO, the industrial systems supplier
More informationHBM-4 CNC Horizontal Borer
HBM-4 CNC Horizontal Borer August 27 CNC Horizontal ROTARY TABLE Heavy loading capacity Auger chip remover High accuracy: 3 pieces flat type clutch for position index provides high accuracy & long durability.
More informationeven better and more powerful!
CNC UNIVERSAL MACHINING CENTRE THE 3 rd GENERATION DMU even better and more powerful! DMGMORI.COM Applications and Parts Machine and Technology Control Technology Technical Data Compact universal machining
More informationHeadquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD. Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
More informationHüller Hille NBH 5X 5-Axis Machining The New Benchmark for Complete Machining
Hüller Hille NBH 5X 5-Axis Machining The New Benchmark for Complete Machining The economic 5-axis machining is found in all industrial areas today. With two different concepts NBH machining centers can
More information5-AXIS VERTICAL MACHINING CENTER
5-AXIS VERTICAL MACHINING CENTER 5-AXIS VERTICAL MACHINING CENTER In 2002, Kitamura Machinery Co., Ltd. developed a 5-Axis Vertical Machining Center Mytrunnion which guaranteed the unexplored realm of
More informationLB SERIES WELE MECHATRONIC CO., LTD. Double Column Machining Center WELE MECHATRONIC CO., LTD
Rheinland Rheinland www.tuv.com www.tuv.com ID:9105046137 ID:9105046137 We lead the way by a new business model ISO 9001 ISO 14001 2011 TAMI SUPREME EXCELLENCE AWARD TOYODA qualified class, precise manufacturing
More informationToyoda Machinery Europe. horizontal machining centres
Toyoda Machinery Europe horizontal machining centres horizontal machining centres FH-J Series: FH400J FH500J FH-S Series: FH450S FH550S FH6S FH-SX Series: FH550SX FH6SX FH800SX FA-S Series: FA6S FA800S
More informationMILLING Bridgeport GX 300 Machining Center
MILLING Bridgeport GX 300 Machining Center Quotation to: Quotation Number: Contact: Address: ABMNameAlpha SOHDocumentOrderInvoice Contact Name ShipToAddressLine1 ShipToAddressLine4 ShipToCity1, ShipToState,
More informationDiscover the BLUESTAR 5
World Premiere! BLUESTAR 5 Discover the BLUESTAR 5 *Price plus VAT Subject to alterations The New Standard Machining Center from Hüller Hille Hüller Hille A Company of ThyssenKrupp MetalCutting tk Numerous
More informationDUGARD. HMCs. DUGARD Machine DUGARD. H3XP / H5XP / SH500 Dugard Horizontal Machining Centres. Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 DUGARD HMCs H3XP / H5XP / SH500 Dugard Horizontal Machining Centres Maximise loading capacity, minimise floor space DUGARD Machine Tools www.dugard.com
More informationVX Vertical Machining Center
VX-1500 Vertical Machining Center VX-1500 Advanced and Updated; The VX-1500. Robust, Cost Effective and Heavy Duty Cutting Performance of Billets up to 2 Tonnes. New Fanuc 31i control, modernized, ergonomic
More informationTyphoon B Series CNC Turning Centres
Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal
More informationCNC universal machining centre DMU 50 DMU 50 The 3 rd generation DMU: even better and more powerful!
www.dmgmori.com CNC universal machining centre The 3 rd generation DMU: even better and more powerful! Applications and Parts Machine and Technology Control Technology Technical Data Compact universal
More informationHIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER Micro-drill HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER The YEONG CHIN FV-Series High-Speed, High-Power Vertical Machining Centers are specially
More informationMVP Series Moving Cross Rail Bridge Type 5-Face Machining Center
MVP Series Moving Cross Rail ridge Type 5-Face Machining Center WE MECHNTRONIC CO., LTD. HEDQURTERS 30512 No.629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Xinpu, Hsinchu, Taiwan TEL : +886-3-588-5191
More informationPICOMAX 823/825. PICOMAX 823/825 VERSA Dynamics and Performance on Top Level. FEHLMANN: The Brand. Vertical Machining Centre in Portal Design
Vertical Machining Centre in Portal Design PICOMAX 823/825 VERSA Dynamics and Performance on Top Level. FEHLMANN: The Brand. PICOMAX 823/825 Precision «Made in Switzerland». At FEHLMANN, the customer will
More informationVMC series. Vertical Machining Center. Standard Features. Optional Features
Standard Features CNC control Z axis with upgraded motor & built-in brake High speed precision spindle at rpm For ISO, 6rpm for ISO Rigid tapping function Arm type ATC Box sliding way for axes Telescopic
More informationGTX Multi-tasking Turning Centers SERIES
GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationSeries Vertical Machining Center
Series Vertical Machining Center High-Rigidity Frame Structure Design High-Rigidity Frame Structur e Design Material cast with Meehanite to upgrade bending resistance and shock absorption, heattreated
More information[ means: Made in the Heart of Europe at a great price. Vertical turning machines VT 400, VT 250, VT 160 with integrated automation
[ E[M]CONOMY] means: Made in the Heart of Europe at a great price. Vertical turning machines VT 4, VT 25, VT 16 with integrated automation EMCO VERTICAL VT 4 The new VT 4 for chuck parts up to 4 mm completes
More informationLinear way Vertical Machining Center
TM TM TM TM Linear way Vertical Machining Center MM series National Award of Outstanding 08 ISO :04 ISO :04 EMS 5465 EMS 5465 ISO 9001:08 ISO 9001:08 FM 538421 FM 538421 Feb. 12 MM-/430 MM-800 1 Taiwan
More informationGantry type 5-Axis Vertical Machining Center
G6 Gantry type -Axis Vertical Machining Center BUFFALO MACHINERY CO., LTD. 6, Lane 8, Desheng Road, Daya District, Taichung City 48-46, Taiwan P.O. Box 0, Daya, Taichung City, Taiwan Tel: +886-4- 60 7
More informationYIH CHUAN MACHINERY INDUSTRY CO., LTD No.8, 9th Rd., Taichung Industrial Park, Taichung, Taiwan :
YIH CHUAN MACHINERY INDUSTRY CO., LTD Headquarters 40755 No.8, 9th Rd., Taichung Industrial Park, Taichung, Taiwan : +886-4-2359-3351 TEL FAX : +886-4-2359-0012 E-mail : extron@extroncnc.com www.extroncnc.com
More informationCompany Profile. Continuous Innovation!! Global Market Net. Global market covers 5 continents More than 30 nations. Prompt Delivery.
Company Profile High Value High Quality Prompt Delivery Continuous Innovation!! EXTRON is a worldwide brand for Yih Chuan Machinery Industry Co., Ltd. It was founded in 1972, in Taiwan, specialized in
More informationCNC COMPOSITE PROCESSING MACHINE
SHENG HUI CNC COMPOSITE PROCESSING MACHINE ShengHu i V T M Series Composite Processing Machine T h e p er f ec t c o m b i n at i o n of m i l l i n g m ac h i n e an d ver t i c al l at h e Th e ve r
More informationSOLUTIONS FOR MOLD MANUFACTURERS
www.unisig.com SOLUTIONS FOR MOLD MANUFACTURERS DEEP HOLE DRILLING AND MACHINING CENTERS FULL RANGE OF DEEP HOLE DRILLING AND MILLING CENTERS MILLING, BTA, AND GUNDRILLING CAPABILITIES DESIGNED FOR MOLD
More informationVSERIES. VSeries Bridgeport V320 5F Bridgeport V480 Bridgeport V480 APC Bridgeport V710 Bridgeport V
VSERIES VSeries Bridgeport V320 5F Bridgeport V480 Bridgeport V480 APC Bridgeport V710 Bridgeport V1000 800-843-8801 WWW.HARDINGE.COM Bridgeport V Series machines have an exceptional combination of features
More informationUltra Wide High Rigidity Vertical Machining Center
Ultra Wide High Rigidity Vertical Machining Center / ULTRA WIDE HIGH RIGIDITY VERTICAL MACHINING CENTER WV108A/B is structurally designed for the heavy-duty machining requirements with ultra wide machine
More informationFAMUP LINEARMILL 600 EM. 5-axis universal machining center
FAMUP LINEARMILL 600 EM 5-axis universal machining center The machine The technology Machine layouts With 5 sided-machining into the future Technical data LINEARMILL 600 EM Working range Positioning stroke
More informationGTZ-2000 SERIES. Multi-tasking Turning Centers
GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationVertical Machining Center. Vertical Machining Center.
Vertical Machining Center www.toyoda.com Corporate Headquarters 316 W. University Drive Arlington Heights, IL 60004 Tel: (847) 253-0340 Fax: (847) 253-0540 E-mail: info@toyoda.com Toyoda Northeast Tech
More informationGTZ SERIES. Multi-tasking Turning Centers
GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements
More information