DV207. Fixed displacement hydraulic motor in (0.33 mm)

Transcription

1 DV207 VIBRATORY ROLLER TIER 3 CERTIFIED ENGINE Make Type Rated horsepower Fuel consumption ELECTRICAL Voltage Batteries Cummins BTAA 3.3-C80 Tier 3 Certified Turbocharged/Charge air-cooled 80 hp ( rpm 0.9 gal/hr (3.5 L/hr) 12 Volts 1 x 12-volt AMP hour 100 Cold cranking amps 640 STEERING Steering type Gear pump Cylinders 1 Steering angle (+/-) 34 Oscillation (+/-) 8 Inside turning radius 15.1 ft (4.6 m) Crab mode (+/-) WEIGHT Operating weight Front drum weight Rear drum weight Front drum linear load Rear drum linear load Drums have tapered edge TRAVEL Drive 7.0 in (180 mm) 16,226 lbs (7360 kg) 8,267 lbs (3750 kg) 7,959 lbs (3610 kg) 145 lb/in (25.9 kg/cm) 139 lb/in (24.9 kg/cm) Hydrostatic Variable displacement axial piston type drum drive pump 1 Hydraulic fixed displacement drum drive motors 2 Drive brake Emergency brake Parking brake Maximum working speed Maximum travel speed Hydrostatic Multi-disc Multi-disc 7.1 mph (11.4 km/hr) 7.1 mph (11.4 km/hr) Gradeability (vibration on) 20 Gradeability (vibration off) 30 Curb clearance 29.8 in (755 mm) VIBRATION Hydraulic circuit type Pump type Closed center Gear Fixed displacement hydraulic motor 2 Vibration Frequency Low High Amplitude Low High Centrifugal force Low High Eccentric 2580 vpm (43 Hz) 3120 vpm (52 Hz) in (0.33 mm) in (0.6 mm) 12,365 lbs (48 kn) 14,613 lbs (65 kn) isolation drum mounts Numbers of isolation Front left (drive motor side) 6 Front right (vibrating motor side) 4 Rear right (drive motor side) 4 Rear left (vibrating motor side) 6 PRESSURIZED WATERING SYSTEM Front water tank 172 gal (650 L) Water filtration stages 3 Watering pumps 2 Tank type Polyethelyne Water tank level LED indicator CAPACITIES Fuel tank 29 gal (110 L) Engine oil 1.7 gal (6.5 L) Hydraulic reservoir 10.6 gal (40 L) Vibration system (each) 0.48 gal (1.8 L) operators compartment Heavy duty isolation mounts insulated from the chassis, handrail, instrument panel with anti-vandal covers, exceptional front /rear visbility. ROPS protection, single-lever speed and direction control with vibration on/off control, multi-position seating, adjustable steering wheel, speed selector, dual-mode vibratory system, side-mount mirrors (left and right). Page 1 of 2 MAXIMUM COMPACTED LIFT THICKNESS Sand/gravel Mixed soils Asphalt 11.8 in (300 mm) 7.9 in (200 mm) 4.7 in (120 mm) STANDARD equipment Fixed ROPS Open Platform with hand rails Anti-vandal cover Halogen worklights x 4 (55 watt/front and rear) Turn signal indicator (left and right) Hydrostatic drive for both drums Dual vibration Front/ dual/ rear drum vibration control Auto vibration stop switch in neutral Articulated chassis Hydraulic oil cooler Backup alarm Retractable seat belt 2 in (51 mm) Lateral shifting suspension seat with foldable arms Pressurized water system Machined tapered drum edges Water filtration 3 stage Master disconnect switch Horn Hourmeter Emergency stop button Lift and tie down provision 4-point Watering system drains Electric fuse protection Steering wheel spinner knob Spin-on fuel, engine oil and hydraulic filters Tool box Vertical lift hood Indicator lights: Battery Engine oil pressure Intake preheater Engine temperature Parking brake Vibration ON/OFF Sprinkler system ON/OFF Optional Equipment High frequency vibration (2880 vpm 48 Hz/3720 vpm 62 Hz) Rotating beacon Front and rear work lights (ROPS or cab mounted) Cab with heat and air conditioning Edge cutter Radio ready (no radio/ two speakers and antenna) Tiltable scrapers

2 E F B J C D A G H I DIMENSIONS A. Wheelbase in (3260 mm) B. Drum diameter 45.3 in (1150 mm) C. Ground clearance 9.5 in (240 mm) D. Curb clearance 29.8 in (755 mm) E. Overall height in (2950 mm) F. Seat height 90.6 in (2300 mm) G. Overall length 174 in (4410 mm) H. Drum width 57 in (1450 mm) I. Overall width 60.6 in (1540 mm) J. Drum thickness 0.6 in (15 mm) NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable. NOTE: All engines meet current EPA emissions requirements. IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Case Construction Equipment Inc. does not warrant the safety or reliability of attachments from other manufacturers. Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies. Form No. CCE201202DV207 Printed in U.S.A CNH America LLC Replaces No. CCE201102DV207 All Rights Reserved All Case construction equipment is biodiesel ready.

3 DV SERIES COMPACTION DV207 I DV210 I DV213

4 DV SERIES COMPACTION DV207 I DV210 I DV213 A new standard for better built roads The Case DV Series large asphalt compactors establish a new industry standard for performance, productivity and reliability. The exclusive Case Dual Drum Drive standard on all large Case DV asphalt models includes direct-drive independent pumps for each drum, delivering 100-percent traction effi ciency and eliminating slippage on the compacted surface. A versatile line-up for production asphalt applications Case DV Series compactors deliver dual amplitudes, dual frequencies and centrifugal forces to meet the needs of any application, from coarse bases to hot-mix asphalt (HMA) surfaces. Independent control of drum vibration (front, rear or both drums), provides the best possible compaction productivity and performance. Smooth control for consistent results Productive, effi cient paving requires a compactor that creates a smooth surface the fi rst time, every time. Case DV Series large compactors provide automatic vibration control (tapered start and stop), ensuring a smooth, consistent surface by preventing directional change and stopping damage. The Case vibratory system automatically starts when the drive lever is moved from neutral and stops when the lever is repositioned back into neutral. Taking care of the operator Case designed the rear-mounted power train on the DV Series compactors to achieve lower noise, vibration and heat for the operator. The result is the industry s best work platform for all-day operations. Operators will also appreciate the ergonomic, commonsense, layout of the operator s station, superior visibility to the drum and water nozzels. Easy, efficient maintenance The DV Series asphalt compactors continue the Case tradition for easy maintenance and serviceability. The compactors offer a onepiece vertical-lift hood for easy, ground-level, obstruction-free access to daily maintenance checkpoints. Compare the Case machines to competitive models that require removal of the water tank to service the engine. All drive components are easily accessible on the large Case DV Series asphalt models, minimizing maintenance time and maximizing productivity. DV207

5 DV210 DV213

6 DV SERIES COMPACTION DV207 I DV210 I DV213 Optional asphalt cutter wheel An asphalt cutter wheel makes asphalt cutting easier and more economical. The replaceable cutting wheel is made with heat treated, abrasive resistant alloy steel. Multi-position operator station The rotating operator s station and swivel seat provides 180 degrees of operator positioning for full view of the compacted surface and drums. Dual Volcolon scrapers Each drum is equipped with dual, adjustable, Volcolon drum scrapers for maintaining the drum surface and ensuring consistent compaction results. Superior cab comfort Case DV cabs are ISO-mounted for maximum operator comfort. An optional cab with air conditioning and heat is available on all models. Instrumentation Operator productivity is maximized by conveniently located and grouped switches and gauges. The multifunction display monitor allows the operator to easily access key operating information.

7 Dual spray bar (Front and Rear) The DV Series compactors feature a high capacity, corrosion proof, triple fi ltration water system with easily serviceable spray nozzles. Standard equipment includes primary and back-up water pumps to ensure uninterrupted production. Isolation-mount operator s platform The operator can stay focused on the job, thanks to the vibrationdampening isolation-mount work platform. Superior centrifugal force values The centrifugal force generated by the DV Series dual vibrating drums results in a consistent, smooth pavement surface. Heavy duty articulation joint DV Series machines are built to last, with durability features like the heavy duty articulation joint. Jobsite illumination Standard front and rear halogen lights powerfully illuminate the job site night or day for continued high productivity. Dual fill port water tank High capacity, corrosion proof water tanks feature dual fi ll ports with integrated fi ltration for quick, easy and safe water servicing. The polyethelyne water tanks are protected by the frame of the machine and feature an easily accessible drain port.

8 DV SERIES COMPACTION DV207 I DV210 I DV213 Productivity for your big paving jobs The large Case DV Series asphalt compactors are big enough and tough enough for the largest road-paving projects. With drums up to 82.7 in. (2100 mm) wide and 53.1 in. (1350 mm) in diameter, the DV Series machines deliver the productivity you need. The combination of fuel-effi cient Cummins diesel engines and 55-gallon fuel tanks keep your DV Series compactor on the job for up to 20 hours between fuel refi lls. Standard halogen front and rear lights illuminate your job site, keeping your crews productive at any time of the night or day. Hydrostatic drive is standard for both vibrating drums. The articulated frame results in a tight turning radius for working in confi ned areas. An optional edge cutter provides an important productivity benefi t. Comfortable operating environment boosts productivity We know a comfortable operator is more productive. That s why the DV Series operator s platform provides best-in-class comfort and visibility. For all-weather operation, Case offers an optional heated and air-conditioned cab. A pivoting and rotating seat gives the operator a full view to either side of the compactor and to interior gauging. The dual multi-function directional lever controls on either side of the seat enable operation from any seated position left or right without excessive operator stress or strain. A tilting steering column enhances operator comfort and control. A lockable dash board cover minimizes the threat of vandalism. A standard fi xed ROPS work platform with rails provides excellent operator protection. Easy to service In addition to grouped, ground-level access to common maintenance checkpoints, the DV Series compactors also feature spin-on fuel, engine oil and hydraulic fi lters for quick fi lter replacement and installation. The machines also offer a standard vertical-lift hood for trouble-free access to the engine compartment. Vertical-lift hood provides ease of service at ground level A vertical-lift hood makes it easy to access the engine, drive train and other key components and systems.

9 You can count on Case You can count on Case and your Case dealer for full-service solutions productive equipment, expert advice, fl exible fi nancing, genuine Case parts and fast service. We re here to provide you with the ultimate ownership experience. Case pride You can take pride in the Case name on your machine. It s backed by more than a century of productivity and performance. Case and your Case dealer are here for you, not only when you buy the machine, but also after you put 1,000 or 10,000 hours on it. A rich, proud history Case Construction Equipment s heritage spans more than 165 years. Growing from J.I. Case s innovations with steam-powered machinery in the late 1800s, Case developed road-building equipment that helped create early 20th century streets and highways across the world. By 1912, Case was well on its way to establishing itself as a full-line equipment manufacturer. The company continued to expand its construction equipment business over the years. Celebrating a tradition of innovation In 1957, Case produced the world s fi rst integrated loader/backhoe made and warranted by one manufacturer. Over the decades and into the 21st century, Case has continued to develop a long line of industry fi rsts and has taken a leadership role in pioneering new products and solutions. Today, Case produces 15 lines of equipment and more than 90 models to meet your toughest construction challenges. Supported by manufacturing and sales in more than 150 countries, Case serves the needs of our customers worldwide. Coast-to-coast customer support In North America, Case equipment is sold and serviced by more than 375 dealer locations. No matter where you work, we re here to support and protect your investment and exceed your expectations. To locate a Case dealer or learn more about Case equipment or customer service, go to or call CASE6. It all adds up. You can count on Case.

10 DV SERIES COMPACTION DV207 DV210 DV213 Operating weight Total 16,226 lbs (7360 kg) 22,928 lbs ( kg) 28,726 lbs ( kg) Front drum 8,267 lbs (3750 kg) 11,574 lbs (5250 kg) 14,561 lbs (6605 kg) Rear drum 7,959 lbs (3610 kg) 11,354 lbs (5150 kg) 14,164 lbs (6425 kg) Drum (front and rear) Width 57.1 in (1450 mm) 66.9 in (1700 mm) 82.7 in (2100 mm) Diameter 45.3 in (1150 mm) 51.2 in (1300 mm) 53.1 in (1350 mm) Thickness 0.6 in (15 mm) 0.9 in (22 mm) 0.8 in (20 mm) Vibration frequency High 3,120 vpm (52 Hz) 3,180 vpm (53 Hz) 3,000 vpm (50 Hz) Low 2,580 vpm (43 Hz) 2,700 vpm (45 Hz) 2,520 vpm (42 Hz) Amplitude High in (.6 mm) in (.7 mm) in (.8 mm) Low in (.33 mm) in (.35 mm) in (.4 mm) Centrifugal force High 14,613 lbs (65 kn) 24,729 lbs (110 kn) 30,349 lbs (135 kn) Low 12,365 lbs (55 kn) 17,310 lbs (77 kn) 21,582 lbs (96 kn) Travel speed Max. travel speed 7.1 mph (11.4 km/h) 6.8 mph (11 km/h) 7.1 mph (11.4 km/h) Max. gradability 30% 40% 40% Engine hp (kw) 80 hp ( RPM 99 hp ( RPM 130 hp ( RPM Type Diesel, Cummins BTAA3.3-C80 Diesel, Cummins QSB3.3-C99 Diesel, Cummins QSB4.5-C130 DV207 DV210 DV213 NOTE: All engines meet current EPA emission regulations. NOTE: All specifi cations are stated in accordance with SAE standards or recommended practices, where applicable. IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifi cations without notice and without incurring any obligation relating to such change. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equipment. Your Case dealer/distributor will be able to give you details of the products and their specifi cations available in your area CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies. Printed in U.S.A. Form No. CCE201103DVSeries Always read the operator s manual before operating any equipment. Inspect equipment before using it, and be sure it is operating properly. Follow the product safety signs and use any safety features provided. Contains 10% post-consumer fiber Case construction equipment is biodiesel friendly. Looking for product specs, customer testimonials, competitive comparisons, fi nance offers and more? Visit us at or call CASE6