AUCTION MILLER MDL. SYNCROWAVE 350LX TIG/STICK WELDING POWER SOURCES TAURING 3-1/2" X 3-1/2" X 1/2" MILD STEEL CAP. ANGLE BENDING ROLL

Transcription

1 AUCTION MAJOR CORPUS CHRISTI AREA INDUSTRIAL EQUIPMENT AUCTION Crawler & Rough Terrain Hydraulic Telescoping Cranes, Portable Job-Site Construction Equip., Press Brakes, Shears, Saws, Tank Turning Rolls, Angle Bending Rolls up to 6" x 6" x 7/8", C-Frame Press, Welding Positioners up to 300,000 Lb. Cap., Headstocks, Welding Equip., Generators, Long Bed Lathe, Forklifts up to 30,000 lb. cap., Manlifts up to 80' reach, Vehicles, Trailers, Much More AS NEW AS AVAILABLE 2013 AUCTION: TUESDAY JUNE 10 10:00 A.M. 18 T. CAP. MANTIS SPANDECK HYDRAULIC CRAWLER CRANE RANSOME 40 T. CAP. DRIVER AND IDLER SET MILLER MDL. SYNCROWAVE 350LX TIG/STICK WELDING POWER SOURCES TAURING 3-1/2" X 3-1/2" X 1/2" MILD STEEL CAP. ANGLE BENDING ROLL PANDJIRIS 3,000 LB. CAP. WELDING POSITIONER INSPECTION: Monday, June 9 9:00 A.M. to 4:00 P.M. & Morning of Sale Day Surplus to the Ongoing Operations of COX TANK CONSTRUCTION & OTHER AREA FABRICATING COMPANIES On Site Auction at Hwy. 181 and Field Avenue TAFT (Corpus Christi Area) TEXAS Plus Some Items Located Offsite to Be Sold by Photo BUYER S PREMIUM: 15% ONSITE 18% WEBCAST On-Site Bidding in TAFT (Corpus Christi Area), Texas or Bid Via Webcast at SACMA 3/4" X 8' CAP. PLATE SHEAR Sale Conducted By: Ron Moore, Texas Lic. #7314 HOUSTON DALLAS ST. LOUIS TAYLOR 30,000 LB. CAP. ROUGH TERRAIN FORKLIFT Read Partial Terms and Conditions on Back Page of Brochure Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX PHONE: (713) FAX: (713) pmi@pmi-auction.com WEBSITE:

2 AUCTION Surplus to the Ongoing Operations of COX TANK CONSTRUCTION & OTHER AREA FABRICATING COMPANIES On Site Auction at Hwy. 181 and Field Avenue TAFT (Corpus Christi Area), TX Plus Some Items Located Offsite to Be Sold by Photo HYDRAULIC CRAWLER CRANE 18 T. CAP. MANTIS SPANDECK, Mdl. 3612, diesel engine, 70' 3-section boom, enclosed cab, expandable tracks up to 30" each side, hook block, headache ball, Greer Radio 2-block alarm, 3,693 H.O.M., S/N T. CAP. MANTIS SPANDECK HYDRAULIC CRAWLER CRANE OVERALL VIEW OF KOEHRING BANTAM ROUGH TERRAIN HYDRAULIC TELESCOPING CRANES GENIE MDL. S-80 4X4 HYDRAULIC MANLIFT MANLIFTS GENIE MDL. S-80 4X4 HYDRAULIC, new 2001, 80' max. platform height, 71'-11" max. reach, diesel engine, extendable wheels, foam filled tires, recently replaced pulpit, 6,346 H.O.M., S/N S JLG MDL. 450AJ, 45' max. height, 24' max. reach, pneu. tires, Z-boom style, 30" x 72" pulpit w/500 lb. rated cap., 40% gradability, S/N SIMON MDL. MP-40, 40' reach, 4-cyl. LP engine, pneu. tires, S/N N.A. ROUGH TERRAIN HYDRAULIC TELESCOPING CRANES (3) 20 T. CAP. KOEHRING BANTAM MDL. S-688, 72' L 3-section telescoping boom, 20' aux. jib, Detroit Diesel Mdl. 453 engine, (4) hyd. outriggers, tires, enclosed cab, hook block and headache ball, S/N , S/N , S/N T. CAP. KOEHRING BANTAM, Mdl. S-628, 60' L 3-section boom, 20' aux. jib., Detroit Diesel Mdl. 453 engine, (4) hyd. outriggers, tires, enclosed cab, hook block, headache ball, S/N 936. BUCYRUS-ERIE 18 T. CAP., Mdl. 360, 60' stick, winch, outriggers, Detroit Diesel, PowerShift trans., 1600 x 20 tires, S/N C360BD1414M. JLG MDL. 450AJ MANLIFT 2 BUCYRUS-ERIE 18 T. CAP. ROUGH TERRAIN HYDRAULIC TELESCOPING CRANE

3 < TAYLOR 30,000 LB. CAP. ROUGH TERRAIN FORKLIFT > MILLER BIG BLUE MDL. 300P CC/CV DC PORTABLE WELDER/ GENERATOR ROUGH TERRAIN FORKLIFTS TAYLOR 30,000 LB. CAP., Mdl. TEB300L, 30,000 lb. 2" load center, 15' lift, 160" lowered height, 5.9 Cummins diesel, PowerShift trans., cab, 92" forks, side shift, 1800 x 24 drive tires, 1200 x 20 steer tires, 3,168 H.O.M., S/N HYSTER 20,000 LB. CAP., Mdl. H200ES short wheel base, 8' forks, side shift, 10' lift, 119" lowered height, Detroit Diesel, PowerShift trans., x 20 tires, 5,739 H.O.M., S/N B007P08428V. PORTABLE WELDER/GENERATORS (3) LINCOLN MDL. SA-400, 400 amp DC, diesel pwrd., skid mtd., S/N A878465, S/N A754823, S/N A730648; MILLER BIG BLUE MDL. 300P CC/CV DC, 300 amp, diesel pwrd., trailer mtd., S/N LG330046E; MILLER BIG BLUE MDL. 251D, 250 amp, diesel engine, skid mtd., S/N KA883686; LINCOLN MDL. SA-250-D3-152, 250 amp DC, diesel pwrd., skid mtd., S/N RA872410; MILLER TRAILBLAZER MDL. 250G 250 AMP WELDING POWER SOURCE, Onan Performance 20 HP gasoline engine, CC/CV AC/ DC welder/400 watt generator, 1,164 H.O.M., S/N KG GENERATOR SET CATERPILLAR MDL. SR KW, Cat 3306 diesel engine, skid mtd., S/N 45BH3628. < CLARK 12,000 LB. CAP. FORKLIFT VIEW OF PORTABLE WELDER/GENERATORS FORKLIFTS CLARK 12,000 LB. CAP., Mdl. C500120, LPG, 77" triple-stage mast, 144" lift height, cushion tires, 48" forks, S/N CLARK 10,000 LB. CAP., Mdl. GCX50, LPG, 95" standard mast, 147" lift height, cushion tires, side shift, 42" forks, S/N GX710U FB. CLARK 10,000 LB. CAP., Mdl. CY120, LPG, 8'-7" max. lift ht., 8' lowered, pneumatic tires, 6' forks, S/N CY120B CLARK 5,000 LB. CAP., Mdl. C500-Y55, LPG, 10'-6" max. lift ht., 7'-4" lowered, pneumatic tires, 3' forks, S/N Y TCM 5,000 LB. CAP., Mdl. FD25, diesel engine, 147" max. lift ht., 92" 2-stage mast, 48" forks, pneu. style cushion tires, 600 H.O.M., S/N NISSAN 5,000 LB. CAP., diesel engine, 61" 2-stage mast, 42" forks, cushion tires, 2,422 H.O.M., S/N KCEH02A25V. CLARK 4,000 LB. CAP., Mdl. GCS20MB, LPG, 83" standard mast, 123" lift height, cushion tires, 42" forks, S/N G138MB DATSUN MDL. F02-30, Mdl. 600 diesel engine, 84" 2-stage mast, pneu. tires, S/N N.A. HYSTER 20,000 LB. CAP. ROUGH TERRAIN FORKLIFT INSPECTION: Monday, June 9 9:00 A.M. to 4:00 P.M. & Morning of Sale PORTABLE AIR COMPRESSOR INGERSOLL RAND MDL. T-30, gasoline engine, horiz. air receiver, lifting cage, skid mtd. CRAWLER DOZER CATERPILLAR, diesel, box blade attached to bucket, S/N N.A. CATERPILLAR MDL. SR KW GENERATOR SET CATERPILLAR CRAWLER DOZER 3

4 SACMA 3/4" X 8' CAP. PLATE SHEAR CINCINNATI 5/8" X 10' CAP. PLATE SHEAR CINCINNATI 14' X 175 T. (EST.) CAP. PRESS BRAKE NIAGARA 1/4" x 12' W CAP. PLATE SHEAR 4 PLATE SHEARS SACMA 3/4" X 8' CAP., Mdl. C11-25, mechanical, front op. power back gauge, air op. mech. clutch, S/N C (To be sold by photo at Cox Tank. Item is at Location B.) CINCINNATI 5/8" X 10' CAP., Mdl. 5FL10, hydraulic, front op. power back gauge, 10' rt. hand squaring arm, S/N (To be sold by photo at Cox Tank. Item is at Location B.) PULLMAX 1/2" X 10' CAP., Mdl. GST430, hydraulic, front op. power backgauge, S/N NIAGARA 1/4" x 12' W CAP., Mdl. JL-12, mechanical, 19.5" gap in side frames, 36" range front op. pwr. backgauge, 6' L L.H. and R.H. squaring arms, S/N HTC 1/4" X 6' CAP., Mdl. 25-6AG, hydraulic, front op. pwr. back gauge, S/N A CIRCLE SHEAR CUSTOM 1/4" CAP., 3 HP motor, 10" dia shear blades. PRESS BRAKES WISCONSIN 16' X 225 T. CAP., Mdl. 16FM225, mechanical, 14' btwn. housings, 8" throat, 3" stroke, Twin Disc E-214 clutch, req. pit, S/N (To be sold by photo at Cox Tank. Item is at Location B.) CINCINNATI 14' X 175 T. (EST.) CAP., mechanical, 12'6" btwn. housings, 9.5" throat, req. pit, S/N N.A. (To be sold by photo at Cox Tank. Item is at location B.) CHICAGO 12' X 150 T. CAP., 10.5' btwn. housings, 8" throat, mechanical, S/N N.A. APRON BRAKE CHICAGO 1/4" X 10' CAP., Mdl. 204, power mechanical, S/N HTC 1/4" X 6' CAP. PLATE SHEAR PRESS ACORN 80 T. (est.) HEAVY DUTY C-FRAME TYPE, Mdl. 8050P, 50" throat, S/N 171C012. (To be sold by photo at Cox Tank. Item is at Location B.)

5 CHICAGO 1/4" X 10' CAP. POWER APRON BRAKE BUFFALO 6" X 6" X 7/8" CAP. HORIZONTAL ANGLE BENDING ROLL HENDLEY BELOIT 10 GA. X 8' CAP. PLATE BENDING ROLLS W/INTEGRAL ANGLE ROLLS Directions to Location B and C Will Be Provided at the Sale Site, and Will Be Available Online at 2 AVAILABLE TAURING 3-1/2" X 3-1/2" X 1/2" MILD STEEL CAP. ANGLE BENDING ROLL KALAMAZOO STARTRITE 36" CAP. SAW AUCTION AUCTION: TUES., JUNE 10 10:00 A.M. ANGLE BENDING ROLLS (2) BUFFALO 6" X 6" X 7/8" HORIZONTAL, Mdl. #3, angles leg out 6" x 6" x 7/8" up to 60" max. dia., leg in 5" x 5" x 7/8" to 66" max. dia., S/N 51Y8683, S/N 51Y7195. TAURING 3-1/2" X 3-1/2" X 1/2" MILD STEEL CAP., horiz. or vert. arbor pos., entry and exit guide rolls, hyd. vari-spd. drive, S/N 100/9. BUFFALO 3" X 3" X 3/8" CAP., mechanical, extra dies, S/N N.A. PLATE BENDING ROLLS w/integral ANGLE ROLLS HENDLEY BELOIT 10 GA. X 8' CAP., Mdl. 3G, initial pinch, 6" dia. feed rolls, 1.5" x 1.5" x 3/16" angle roll cap., 7.5 HP motor, S/N MISC. FABRICATING EQUIPMENT FABRILINE COMBINATION PUNCH AND ANGLE SHEAR, mtd. to common tbl., hyd. power supply; 20" ABRASIVE CHOP SAW; MASTER MACHINE CO. SPECIAL MACHINE, used to machine slots in thick plate, S/N 319. LONG BED ENGINE LATHE HENDY 40" SWING X 296" CENTERS, 32" 4-jaw chuck, threading, taper attachment, (2) steadyrests, S/N N.A. SAWS MARVEL SERIES V-10A TILT FRAME VERT., 10" x 10" cap., 1" band width, 3 HP motor, spds.: FPM, S/N D W. KALAMAZOO STARTRITE 36" CAP., 36" throat, 26" x 26" main tbl., blade welder/ grinder, S/N MISCELLANEOUS CONSTRUCTION, SHOP SUPPORT & PLANT SUPPORT EQUIPMENT CATERPILLAR EXCAVATOR BOOM ATTACHMENT, S/N 3VS353; 16" ABRASIVE CHOP SAW; PORTABLE PRESSURE WASHER, gasoline pwrd.; (2) 3-STAGE RECIPROCATING ELECTRIC AIR COMPRESSORS, skidded; WATER SOFTENING/WATER FIL- TRATION SKID, w/bottle filling attachment; KEWAUNEE LOW TEMPERATURE WATER BOILER; (2) RECIPROCATING 3-STAGE SKIDDED AIR COMPRESSORS; (4) PALLETS OF VALVES; JOHN DEERE RIDING LAWNMOWER; LAWNBOY SELF-PRO- PELLED WALK-BEHIND MOWER; 7 HP GASOLINE POWERED 3.5" TRASH PUMP; WIDE SELECTION OF WELDING ACCES- SORIES SEE CATALOG FOR DETAILS. 3-STAGE RECIPROCATING ELECTRIC AIR COMPRESSORS CUSTOM 1/4" CAP. CIRCLE SHEAR On-Site Bidding in TAFT (Corpus Christi Area) Texas or Bid Via Webcast at 5

6 LARGE CAPACITY WELDING POSITIONER To be sold subject to confirmation of the high bid. RANSOME 150 T. MDL. 3000, drop center type, 3,600,000 inch/lbs. rotational torque, power tilt and rotation, 24' wide fabricated I-beam type tbl., approx. measurements: 30' x 34' x 15' high, est. weight: 235,000 lbs., S/N Pricing to haul to dockside, load and tie down on a barge is available. Contact Auctioneers. (To be sold by photo at Cox Tank. Item is at Location C.) Directions to Location B and C Will Be Provided at the Sale Site, and Will Be Available Online at < WORTHINGTON COMBINATION WELDING HEADSTOCKS W/MANIPULATOR ARMS AVAILABLE > PANDJIRIS 3,000 LB. CAP. WELDING POSITIONER WELDING POSITIONERS PANDJIRIS 3,000 LB. CAP., new 2013, Mdl. 30-6, adj. base, S/N 18309X RANSOME 1,000 LB. CAP., Mdl. 10-P, 3-jaw chuck, adj. base, pwr. tilt, S/N COMBINATION WELDING HEADSTOCKS w/manipulator ARMS (2) WORTHINGTON W/50" DIA. FACE PLATES, 56" manipulator arm, Lincoln SA-800 on one w/large 3-jaw chuck, SA-750 power source on the other, Lincoln weld feed controls on both, track mounted, S/N N.A. WELDING HEADSTOCK WORTHINGTON 10,000 LB. CAP., Size 6, 53" x 53" sq. tbl., S/N TANK TURNING ROLLS CUSTOM 120 T. IDLER ROLL, new rubber. RANSOME 40 T. CAP. DRIVER AND IDLER SET. WEBB 6 T. CAP. DRIVER AND IDLER SET. SUB-ARC WELDING POWER SOURCES (3) LINCOLN MDL. DC-1500, 1,500 amp rated output, multiprocess DC unit for automatic welding operations, fan cooled, solid state. LINCOLN MDL. AC-1200, 1,200 rated output, designed for operation w/lincoln NA-4 automatic wire feeder, thermostat protected, recently rebuilt. RANSOME 1,000 LB. CAP. WELDING POSITIONER < LINCOLN MDL. AC-1200 SUB-ARC WELDING POWER SOURCE CUSTOM 120 T. IDLER ROLL TIG/STICK WELDING POWER SOURCES (13) MILLER MDL. SYNCROWAVE 350LX, as new as 2007, 350 amp rated output, squarewave type, digital meters, balance ctrl., S/N LE and LH series MILLER MDL. 330A/BP, 300 amp rated cap. MIG WELDING POWER SOURCES MILLER MDL. MP-65E, 650 amp cap., S/N HE ; MILLER MDL. MP-450E, 450 amp., S/N HK STICK WELDING POWER SOURCES (4) LINCOLN MDL. R3R-500-I 400, 400 amp rated output, fan cooled, incl. S/N A ; MILLER MDL. SRH444, 400 amp cap., S/N JB534121; (3) MILLER MDL. SRH333, 300 amp cap., S/N HK330436, S/N HJ131101, HJ131099; (2) AIRCO MDL. 300RS-24-C, 300 amp, S/N HJ206842, S/N On-Site Bidding in TAFT (Corpus Christi Area), Texas or Bid Via Webcast at AS NEW AS AVAILABLE RANSOME 40 T. CAP. DRIVER AND IDLER SET 6 > MILLER MDL. SYNCROWAVE 350LX TIG/ STICK WELDING POWER SOURCE

7 JOHN DEERE MDL. 630 UTILITY TRACTOR 2004 FORD MDL. F-250 SUPER DUTY PICKUP TRUCK UNUSED (2) 3,000 GAL. NEW STORAGE TANKS 1997 HAULMARK 24' CARGO TRAILER UHAUL STYLE CAR TRAILER DEMAG 6 T. WIRE CABLE TYPE OVERHEAD CRANE HOIST UTILITY TRAILER UNUSED (2) 100 GAL. TRANSPORT TANKS NEW STORAGE TANKS (8) UNUSED STORAGE TANKS; (2) 3,000 GAL., (2) 2,000 GAL., (2) 1,200 GAL., skidded, lifting lugs, forklift slots, fittings for sight gauges, top or bottom draw, 3/16" carbon steel construction, built to UL142 standards; (2) UNUSED 100 GAL. TRANSPORT TANKS, skidded, lifting lugs, forklift slots, 3/16" carbon steel construction. (2) DAYTON MDL. 5W658C 12-VOLT DC WINCHES LARGE QTY. OF PLATE LIFTING CLAMPS UTILITY TRACTOR JOHN DEERE MDL. 630, 2-cyl. LP engine, power steering. MISC. MATERIAL HANDLING EQUIPMENT LARGE QUANTITY OF HEAVY DUTY PLATE LIFTING CLAMPS. HOISTS & WINCHES DEMAG 6 T. WIRE CABLE TYPE OVERHEAD CRANE HOIST, Type EKDH316H12KN24/1F10, S/N ; (2) DAYTON MDL. 5W658C 12- VOLT DC WINCHES. PICKUP TRUCKS 2005 FORD MDL. F-250 FX4 OFF ROAD, crew cab, PowerStroke Turbo diesel V8 engine, A/C, auto. trans., long bed, ext. aux. fuel tank, running board, headache rack, gray, VIN 1FTSW21P65RB FORD MDL. F-250 SUPER DUTY, crew cab, toolbox, grill guard, front leather, rear cloth seats, A/C, auto. trans., console, white, VIN 1FTNW20L- 44EB CHEVY MDL. 2500HD, crew cab, front grill guard, toolbox, auto. trans., gasoline, A/C, auto. trans., leather seats, console, maroon, Odo reads: 137,705, VIN 1GCHC23U61F UTILITY TRAILERS UHAUL STYLE CAR TRAILER, tilt bed w/crank winch, dual axle, ball hitch, spare tire; UTILITY TRAILER, dual axle, ball hitch, wood deck w/check plate in front area. ASSORTED PALLETS OF VALVES UNUSED CARGO TRAILER 1997 HAULMARK 24 FT., V nose, radial tires, tandem axle w/brakes, lighted interior, roof vents, locking side man door, full width ramp in back, 54" W ramp in front, 2-5/16" ball w/break away switch, VIN 16HGB2427VU OFFICE COPIER CANON MDL. NP6016, up to 11" x 17" copy size cap. TURTLE EXCLUDER DEVICES TURTLE EXCLUDER DEVICES (APPROX. 100) UNUSED T.E.D.s, stainless steel rings, treated netting. AUCTION: TUESDAY, JUNE 10 10:00 A.M. INSPECTION: Monday, June 9, 9:00 A.M. to 4:00 P.M. & Morning of Sale Day 7

8 P.O. Box Houston, TX PUBLIC INVITED AUCTION: TUESDAY, JUNE 10 10:00 A.M. DATED MATERIAL PLEASE DELIVER MAJOR CORPUS CHRISTI AREA INDUSTRIAL EQUIPMENT AUCTION Crawler & Rough Terrain Hydraulic Telescoping Cranes, Portable Job-Site Construction Equip., Press Brakes, Shears, Saws, Tank Turning Rolls, Angle Bending Rolls up to 6" x 6" x 7/8", C-Frame Press, Welding Positioners up to 300,000 Lb. Cap., Headstocks, Welding Equip., Generators, Long Bed Lathe, Forklifts up to 30,000 lb. cap., Manlifts up to 80' reach, Vehicles, Trailers, Much More AUCTION TAFT (Corpus Christi Area) TEXAS ASSOCIATION OF MACHINERY AND EQUIPMENT APPRAISERS ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER Presorted First Class Mail U.S. Postage PAID Eugene, Oregon Permit No. 17 DIRECTIONS & LODGING FROM CORPUS CHRISTI AIRPORT: Exit the airport and follow signs to Texas 44. Turn right (east) onto Agnes St. and enter onto TX Hwy. 44. Proceed to TX 358/Padre Island Dr. Exit onto North P.I. Dr./358 and proceed to I-37. Take I-37 east towards downtown. As you enter the downtown Corpus area, follow the signs to enter onto Texas Hwy. 35/US Hwy. 181 North towards Portland. You will cross over the big bay bridge and then eventually enter Portland. Follow the signs to stay onto US Hwy. 181 North after it splits w/tx 35. As you drive through the wind farm area you will eventually enter Taft. The auction site will be on your left. Watch for auction signs. Directions to Location B and C will be provided at the sale site, and will be available online at HAMPTON INN...(361) US 181 Frontage, Portland, Texas HOLIDAY INN & SUITES...(361) Reliant Dr., Portland, Texas A 15% Buyer s Premium Will Apply On-site. A 18% Buyer s Premium Will Apply to Webcast Bids. See Above Rules for Participation. Everything will be sold to the highest bidder or bidders for cash in accordance w/the auctioneer s Customary Terms of Sale, copies of which will be posted on the premises. ALL PAYMENTS MUST BE MADE BY CASH, CASHIER S CHECK, WIRE TRANSFER OR COMPANY CHECK W/BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC. Here is an example of what your letter should be: Mr. Customer Name is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $. This letter is good until July 10, In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale. Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together w/all expenses and charge of resale, will be charged to the defaulting purchaser. The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase. Buyer agrees to accept assets purchased AS IS, W/ALL FAULTS and W/REMOVAL AT BUYER S RISK AND EXPENSE. THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR QS UNABLE TO ATTEND? Bid on-line in real time at TO PARTICIPATE YOU MUST: 1. Register at DO IT NOW. 2. Either wire transfer, or mail a cashier s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery, Inc. P.O. Box 19100, Houston, TX If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON T WAIT. If you need assistance, don t hesitate to call (713) ALL WEBCAST BIDS ARE SUBJECT TO A 18% BUYER S PREMIUM. PARTIAL TERMS & CONDITIONS FINANCE YOUR AUCTION PURCHASE Conserve Your Cash & Increase Your Bidding Power AuctionLea$e Provides M&E Financing With Approvals from $5,000 to $999,000 (800) Apply Online: PLANT & MACHINERY INC. APPRAISAL DIVISION Confidential Industrial Machinery & Equipment Appraisals Call USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER. The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items. Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance. These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.