Site Steel Product Catalog 2009

Transcription

1 Site Steel Product Catalog 2009 Monopoles Lattice & Guyed Tower Rooftop/Wall Mounts Coax Support & Protection Equipment Platforms 3958 Boone Rd SE Salem, OR 97317

2 PO BOX 3850 Salem OR Local: Toll Free: Fax: March 5, 2010 Following are the general specifications we follow in the design and production of steel structures, antenna mounts, etc. Should you have any questions regarding these specifications, or our capabilities please feel free to call. 1. Products are designed to meet the wind loading requirements of TIA/EIA-222 -F, ANSI/TIA-222-G, IBC and UBC as required. 2. Products are fabricated per the requirements of the AISC Manual of Steel Construction. 3. Products are welded per the requirements of the AISC Manual of Steel Construction and the American Welding Society D1.1 Structural Welding Code. 4. Steel products are hot-dip galvanized in accordance with ASTM A Steel products are fabricated from certified ASTM Materials. 6. Hardware is either SAE Gr. 5 or ASTM A325 and is Galvanized per the requirements of ASTM A153 or ASTM B All welders are certified to AWS standards. 8. AWS Certified Welding Inspector on staff. 9. ICC, OBOA, City of Portland, and City of Corvallis Certified Inspector on Staff. 10. PE Certifications available for all 50 States. 11. Fabrication Shop is: - AISC CERTIFIED - CITY OF L.A. TYPE 1 APPROVED FABRICATOR - COUNTY OF SAN BERNARDINO APPROVED FABRICATOR Thank You, Jesse Jaramillo Design & Engineering Manager jessej@steelheadmetals.com

3 Monopoles Universal Monopole Pole Clamp (3 Sector)... Light Duty Universal Monopole Pole Clamp (3 Sector)... Universal Monopole Pole Clamp (4 Sector)... Universal Monopole Pole Clamp (2 Sector)... Universal Monopole Standoff and Cross Arm T-Arm Kit for Monopoles Slim Line Mounts for Round & Polygon Poles Curved Standoff for Cross Arm Dual Antenna Chain Mount Chain Mounts for Round or Polygon Poles... Single Sector Chain Mount... Standoff Pipe Mount... Chain Mount for GPS/E911 Mount... Monopole Platform with Hatch... Rotatable Monopole Platform... Low Profile Monopole Platform w/ 12 Face... Slim Line 4 Sector Platform for Monopole... 4 Sector Platform with 10 Face Round Platform Lattice & Guyed Tower Tower Leg Pipe Mounts... Tower Leg Clamp Kits... Sloped Tower Leg Clamp Kits... Universal Standoff Pipe Mounts... Single Antenna Standoff... Tower T-Arm Standoff Adapter Standoff... Pipe to Pipe Adapter Adjustable Standoff Mount... Ice Shields for Microwave Dish... Face Mounted Pipe Mount Kit... Face Mounted Standoff Frame... Handrail Antenna Mounts... Standoff Pipe Mount with adjustable Slope... Light Duty Standoff Pipe Mount... Standoff Pipe Mount for Horizontal Angle... Stabilizing Rod Kit... Telescoping Pipe Mount... GPS/E911 Antenna Mounts... Tower Antenna Frame Antenna Frame with 4 Standoff Taper Adjustment Kit... Standoff Frame... Universal Standoff Frames... Wireless Frames to attach to Vertical Pipe... Wireless Frames to attach to Vertical Pipe with Slope Adjustment... Slim Line Wireless Frame... 4 Sector Rotatable Tower Platform... 3 Sector Rotatable Platforms... Co-Locate Platform for Lattice Tower... Low Profile Platform Round Platform

4 Rooftop/Wall Mount Non-Penetrating Rooftop Frames... Non-Penetrating Tripod Base... Tripod for Wireless Mounts... Small Non-Penetrating Roof Mounts... Non-Penetrating Sloped Roof Mount... Tri-Sector Adapter... Tri-Sector Rooftop Frames... Tri-Sector Non Penetrating Rooftop Frame... Single / Multi-Sector Rooftop Mounts... Water Tank Antenna Support Frame... Water Tank Mounts... Wall Mount and Wall Mount Kits... Parapet Wall Mount... Slider Brackets... Wall Mount Kits... Corner Wall Mounts... 3 Standoff Wall Mount... Custom Antenna Frame with RFP Support... Rooftop Bridge Kits... Straight Splice / 45 Splice... PVC Sleepers... Rooftop Hood Entry... Plain End Pipe Galvanized Coax Support & Protection Coax Ladder... Coax Wall Covers... Climbing Ladder Coax Support Bracket... Monopole Coax Support Bracket & Cover... Universal Snap-In Bracket... Trapeze Kit... Cluster Support Brackets... Mini Cluster Block... Universal Round Member... Ice Bridge / Grip strut Extensions... Bridge Kits... Bridge Kit Components... X Brace for Bridge Kits... Stabilizer Kit for Pipe Column... Equipment Platforms & Racks Equipment Rack... Telco-PPC Rack for Platform x 16 Equipment Platform x 20 Equipment Platform x 15 Modular Platform... Equipment Platform with 4 Jacks... Adjustable Equipment Platform and Attachments... Micro Cell Vault... 8 x 10 Utility Vault... Custom Platforms

5 1 MONOPOLES Universal Monopole Pole Clamp (3 Sector) for Round & Polygon Poles - Can accommodate flush mounted 2⅜ OD - 4½ pipe with separately ordered U-Bolts List Price SHPC to 36 OD $ SHPC to 60 OD $ Light Duty Universal Monopole Pole Clamp (3 Sector) for Round & Polygon Poles - Mounting Pipes ordered separately - These two kits include U-Bolt Mounting Hardware for 2 ⅜ OD Pipe List Price SH to 36 OD $ SH to 60 OD $

6 MONOPOLES 2 Universal Monopole Pole Clamp (4 Sector) for Round & Polygon Poles - 2⅜ - 4½ OD Pipes can be directly mounted to Clamp for flush mount - Mounting Pipes and U-Bolts ordered separately SH10196 SH to 36 dia. 36 to 60 dia. Universal Monopole Pole Clamp (2 Sector) for Round & Polygon Poles - 2⅜ thru 4½ OD Pipes can be directly mounted to Clamp for flush mount - Mounting Pipes and U-Bolts ordered separately SH10310 SH10311 SH10313 SH dia dia dia dia.

7 3 Universal Monopole Standoff and Cross Arm MONOPOLES - Standoff Arms include Stop Sign, (8) U-Bolts, and 4 Mounting Bolts SHSTA10 SHSTA12 SHSTA24 SHSTA30 SHSTA36 SHSTA48 SHSTA60 SHCA-5 SHCA-8 SHCA-10 SHCA-13 5 Cross Arm 8 Cross Arm 10 Cross Arm 13 Cross Arm 10 Standoff 12 Standoff 24 Standoff 30 Standoff 36 Standoff 48 Standoff 60 Standoff SHSTA Standoff SHCA Cross Arm Shaded Area Included in Kit T-Arm Kit for Monopoles - Includes Pole Clamp, Standoff & Cross Arm Pole Clamp Included unless noted SH Standoff w/ 13 Cross Arm & (9) 72 Pipes SH Standoff w/ 13 Cross Arm & (12) 72 Pipes SH Standoff w/ 13 Cross Arm & (12) 84 Pipes SH Standoff w/ 13 Cross Arm & (12) 96 Pipes 36 Standoff w/ 13 Cross Arm & No Pipes SH10567-X SH10567-L 36 Standoff w/ 13 Cross Arm & (12) 96 Pipes for Pole Clamp SHPC3660 SH Standoff w/ 10 Cross Arm & (9) 72 Pipes SH Standoff w/ 10 Cross Arm & (12) 72 Pipes SH Standoff w/ 10 Cross Arm & (9) 84 Pipes SH Standoff w/ 10 Cross Arm & (9) 96 Pipes SH11740-X 60 Standoff w/ 10 Cross Arm & No Pipes SH11740-L 60 Standoff w/ 10 Cross Arm & (12) 96 Pipes for Pole Clamp SHPC3660

8 MONOPOLES 4 Slim Line Mount for Round & Polygon Poles - Arms have 0-30 Down Tilt Capability - Kit includes (3) Arms, all Mounting Hardware, and Pole Clamp - 2 ⅜ OD Mounting Pipes ordered separately SH13884 SH Antenna Capacity 9 Antenna Capacity SH10172 Shown 4 ft. SH13884 Slim Line Mount for Round & Polygon Poles - Kit includes (3) Arms, all Mounting Hardware, and Pole Clamp - 2⅜ OD Mounting Pipes ordered separately SH14870 SH dia dia 4 ft

9 5 MONOPOLES 5 Curved Standoff for Cross Arm - Kit includes SHCAMP Cross-over Plate, Cross-arm U-Bolts, and Mounting Hardware - Pole Clamp ordered separately - Cross-arm ordered separately SH Standoff Shaded Area Included in Kit Dual Antenna Chain Mount with 48 Standoff - Fits 5 to 36 Poles - Kit includes Mounting Hardware and U-Bolts for (6) 2⅜ OD Pipe - Mounting Pipes ordered separately SH10400 SH Arm Standoff Single-Arm Standoff

10 MONOPOLES 6 Chain Mount for Round or Polygon Poles with 18 Standoff - Kit includes U-Bolts for mounting 2⅜ - 4½ Pipe - Mounting Pipes ordered separately SH12591A SH12591B 3-Sector Mount 4-Sector Mount Chain Mount for Round or Polygon Poles - Includes Hardware for 4½ and 2⅜ OD Pipe - Mounting Pipes ordered separately SHCM1 SHCM2 SHCM3 SHCM4 Single-Sector Mount fits 4½ - 40 OD 2-Sector Mount fits 4½ - 44 OD 3-Sector Mount fits 8⅝ - 50 OD 4-Sector Mount fits OD

11 7 MONOPOLES Single Sector Chain Mount for bolt-on Pipe Mount - Flanged Pipe Mount ordered separately SH13253 Universal Mount fits 4½ - 40 OD Shaded Area Included in Kit 24 Standoff with 5 Pipe Mount Chain Mount for GPS/E911 - Fits 4½ thru 40 pipe - Also available in Lattice/Guyed Tower - Hardware not included 2⅜ OD x 12 SH ⅜ OD x 5 SH ½ OD x 5 SH15053 GPS/E911

12 MONOPOLES 8 Monopole Platform with Hatch - Easy-installation welded design - Kit includes Pole Clamp and 12 Cross-over Plates for 2⅜ OD Mounting Pipes - Has pass-through hatch - Mounting Pipes ordered separately SH10062 SH10043 SH10062-H Fits OD Poles Fits OD Poles Handrail Kit 12 antenna center to center max Rotatable Monopole Platform - Easy 3-piece installation - Kit includes Pole Clamp and 12 Cross-over Plates for 2⅜ OD Mounting Pipes - Rotatable on Pole w/out loosening Pole Clamp - Mounting Pipes ordered separately SH10223 SH10224 SH10062-H Fits OD Poles Fits OD Poles Handrail Kit

13 9 MONOPOLES Low-Profile Monopole Platform with 12 Face - Kit includes Pole Clamp, (12) Cross-over Plates, and U-Bolts - Handrail Kit ordered separately - Mounting Pipes ordered separately SH1096 SH1096-L SH1096-HR Fits OD Pole Fits OD Pole Handrail Kit 12 antenna center to center max Slim Line 4 Sector Platform for Monopole - Includes Pole Clamp, and Cross-over Hardware for up to (16) Mounting Pipes - Mounting Pipes ordered separately SH Face / Fits OD Pole SH15232-L 10 Face / Fits OD Pole SH Face / Fits OD Pole SH13573-L 12 Face / Fits OD Pole 10 or 12 face

14 MONOPOLES 10 4 Sector Platform with Hatch - Includes Cross-over Hardware for up to (16) Mounting Pipes - Mounting Pipes ordered separately SH13954 SH13954-L Fits OD Pole Fits OD Pole 10 Face 12 Round Platform for Monopole Pole Clamp included - Kit includes (12) 2⅜ OD x 84 Mounting Pipes SH Round Co-Locate Platform

15 11 LATTICE & GUYED TOWER Universal Tower Leg Pipe Mounts - For Microwave Dishes and Antenna Frames - Fits round or angle Tower Legs 1.9 OD - 7½ OD Pipe Angle 2½ - 8 (3-leg) Angle 2½ - 6 (4-leg) - Accommodate for Slope (0-20 ) SHUPM60 SHUPM272 SHUPM266 Pipe Mount with 4½ x 60 OD Pipe Pipe Mount with 2⅜ x 72 OD Pipe Pipe Mount with 2⅜ x 66 OD Pipe Shaded Area Included in Kit Tower Leg Pipe Mounts (4) 11/16 holes with 2 mounting patterns 1.) 4 center to center 2.) 6 center to center - 5 Pipe Mounts with welded Mounting Tabs - Flanged Pipe Mount 5 pipe mount SH965 SH967 SH968 SH1161 Vertical 4½ OD Pipe Mount 4½ OD Pipe Mount for 16:1 Slope 4½ OD Pipe Mount for 12:1 Slope Vertical 2⅜ OD Pipe Mount Shaded Area Included in Kit

16 LATTICE & GUYED TOWER 12 (4) 11/16 holes with 2 mounting patterns 1.) 4 center to center 2.) 6 center to center Tower Leg Clamp Kit - Fits 1.9-7½ OD Pipe Angle 2½ - 8 (3-leg) Angle 2½ - 6 (4-leg) SH10047 SH10098 Fits 2-8⅝ OD Pipe or 2½ - 6 Angle Fits 2-14 OD Pipe or 2½ - 10 Angle (4-leg) 2½ - 14 Angle (3-leg) Shaded Area Included In Kit Sloped Tower Leg Pipe Mount Adapter Kit - Includes U-Bolt Hardware for 4½ OD Pipe - Mounting Pipe ordered separately - Adjusts up to 5 with 3ft clamp spacing - Use with Clamp Leg Kits above SH10098-A Slope Adjustment Plate (4) 11/16 holes with 2 mounting patterns 1.) 4 center to center 2.) 6 center to center Shaded Area Included In Kit

17 13 LATTICE & GUYED TOWER Universal Standoff Pipe Mount for Vertical Legs SH Standoff SH Standoff SH ½ OD x 5 SH SH1738 / 9 Single Antenna Standoff - Fits 1.9-7½ OD Pipe Angle 2½ - 6 (3-leg) Angle 2½ - 6 (4-leg) - Kit includes all installation Hardware - Adjustable for 9:1, 12:1, 16:1 Slopes - 2⅜ OD Pipe ordered separately SH10468 SH Standoff 3 Standoff Tower T-Arm Standoff Adapter - Fits 2⅞ OD - 4½ OD Tower Leg - Includes installation Hardware SH2968 SH Standoff 2 Standoff

18 LATTICE & GUYED TOWER 14 Pipe to Pipe Adapter 12 Light Duty Standoff - Pipe to Pipe Adapter ordered separately SH Standoff Light Duty Pipe to Pipe Adapter SH10013 Adapter for 1-3½ OD Pipe to 2⅜ - 5 OD Pipe 2⅜ OD x 44 2⅜ OD x 66 Shaded Area Included In Kit SH11893 Shown SH11890 Adapter for (2) 1-3½ OD Pipes SH11891 Adapter for (2) 2⅜ - 5 OD Pipes SH11893 Adapter for 1-3½ OD Pipe to 4-9 OD Pipe 4 to 6 Adjustable Standoff Mount - Fits 1.9-7½ Pipe - Angle 2½ - 8 (3-leg) - Angle 2½ - 6 (4-leg) - Kit includes Stabilizing Rod - 2⅜ - 3½ Mounting Pipe ordered separately SH10257 Adjustable from 4-6

19 15 LATTICE & GUYED TOWER Ice Shields for Microwave or Panel Antennas Dish Antenna - Attaches to 4½ Pipe Mount or Tower leg - Includes 200 of Cable and Hardware SH11053 SH10800 SH11135 SH Ice Shield 4 Ice Shield 6 Ice Shield 8 Ice Shield Whips / Panel Antenna - Area of protection: 2 x 2 - Clamps to ½ Pipe Angle 2-8 (3 and 4 leg) 2 SH10406 Ice Shield for Antenna Face Mounted Pipe Mount Kit - Includes 4½ OD x 60 Pipe Mount SH11774A Face Mounted Standoff Pipe for 3 wide Tower Face with legs up to 2⅞ OD SH11774B Face Mounted Standoff Pipe for up to 10 wide Tower Face with legs up to 6⅝ OD

20 LATTICE & GUYED TOWER 16 Face Mounted Standoff Frame 2 Standoff - Kit includes (2) Stabilizing Rods, and Pipe Mount Plates for (4) Antennas - 2⅜ Mounting Pipes ordered separately - Fits OD Pipe Angle 2½ - 8 (3 leg) Angle 3-6 (4 leg) - 12 max antenna spacing SH12227 Standoff Frame Handrail Antenna Mounts - Fits 1-5 OD round Handrails 2-3 angle Handrails - Kit includes all Mounting Hardware - 2⅜ Mounting Pipes ordered separately SH10675 SH10676 For Round Member For Angle Member SH10675 SH10676 Shaded Area Included in Kit

21 17 LATTICE & GUYED TOWER Standoff Pipe Mount with Adjustable Slope - Fits OD Pipe Angle 2½ - 8 (3 leg) Angle 2½ - 6 (4 leg) - Adjust for Slope (0-20 ) - Mounting Pipes attached - Stabilizing Rod included SH10341 SH SH SH Standoff w/ 4½ x 5 mtg. Pipe 3 Standoff w/ 2⅜ mtg. Pipe 4 Standoff w/ 2⅜ mtg. Pipe 6 Standoff w/ 2⅜ mtg. pipe Light Duty Standoff Pipe Mount - Fits all Pipe up to 6 OD Angle up to 4 (4-leg) Angle up to 5 (3-leg) OD x 30 Mounting Pipe attached - Includes Leg Clamp Hardware SH11240 SH11886 SH11887 SH Standoff 3 Standoff 4 Standoff 6 Standoff

22 LATTICE & GUYED TOWER 18 Standoff Pipe Mount that Mounts to Horizontal Angle - Fits Angle Girts from 3 x3 to 6 x6-2⅜ OD x 7 Mounting Pipe attached SH11023 SH Standoff 4 Standoff SH10021 Stabilizing Rod Kit included with SH11024 only Stabilizing Rod Kit SH10021 Stabilizing Rod Kit w/ Rod Support Bracket OD x 10 Pipe - Rod Support Bracket clamps to 1 OD - 5 OD Pipe or 2-3 Angle SH10021 Stabilizing Rod Kit w/ Rod Support Bracket Rod Support Bracket ½ Bolt will attach to Tower or Rod Support Bracket Shaded Area Included in Kit

23 19 LATTICE & GUYED TOWER SUPER-FLY Tower Antenna Frame - 10 Fast set frame includes crossovers for 2⅜ OD mounting pipes - Clamps to: 1.9 OD 7-1/2 OD Pipe, 2-1/2 x 2-1/2-6 x 6 (4) leg angle, 2-1/2 x 2-1/ x 8 (3) leg angle - Adjusts up to 30 side to side each direction - Leg slope adjustment up to 5 - Stabilizing rods included (10 long) - Mounting pipes ordered separately SH14274 Super-Fly Adj. Frame Fast Deployment Ready To Ship GPS/E911 Antenna Mounts - Mounting Pipe size 1.90 OD - Mounting Angle size 2 - Banding and Clips ordered separately SH15125 SH Standoff 24 Standoff ⅝ hole - Fits 1.9-3½ OD pipe - U-Bolts included Adjustable-A-Tilt SH Standoff ⅝ hole

24 LATTICE & GUYED TOWER 20 Universal Mounting Bracket Fits 1.9-7½ OD Pipe Angle 2½ - 8 (3-leg) Angle 2½ - 6 (4-leg) 2 Standoff Tower Antenna Frame - 10 Frame includes 3 crossover kits for 2⅜ OD mounting pipes - 13 & 15 Frame includes 4 crossover kits for 2⅜ OD mounting pipes - Mounting pipes ordered separately - Stabilizing rod included SH14276 SH14275 SH Face 10 Face 15 Face Slope Adjustment Bracket 12 Antenna Frame with 4 Standoff Taper Adjustment Kit SH11763 Tower Face Span Kit (Shaded area) Kit includes: - (2) 3 OD x 12 6 Pipe - (2) 3 x 3 Cross-over Plates - All leg mounting Hardware SH Antenna Frame with 4 Standoff Kit includes: - (1) SH (2) 10 Stabilizing Rods - Cross-over Plates for (4) Antennas 4 Standoff 12 Antenna Frame SH11763 Max fit is 12 wide tower

25 21 LATTICE & GUYED TOWER Standoff Frame - Frame will rotate horizontally +/ Frame will adjust between Vertical and 7 of Leg Slope - Fits 1.9-7½ OD Pipe Angle 2½ - 8 (3-leg) Angle 2½ - 8 (4-leg) - Designed for (3) or (4) Antenna configuration - Mounting Pipes ordered separately SH12288 SH14871 Standoff Frame with 10 Face Standoff Frame with 12 Face *NOTE: for Vertical Tower Legs Leg Slope Frame rotation decreases from to as Leg Slope increases from Universal Standoff Frame Frame pivots Fits 1.9-7½ OD Pipe Angle 2½ - 8 (3-leg) Angle 2½ - 6 (4-leg) - Stabilizing Rod Included - 10 Frame includes 3 Cross-over Kits for 2⅜ OD Mounting Pipes - 12 Frame includes 4 Cross-over Kits for 2⅜ OD Mounting Pipes - Mounting Pipes ordered separately SH14873 SH10382 SH10402 SH Face 10 Face 12 Face 15 Face

26 LATTICE & GUYED TOWER 22 Wireless Frame to attach to Vertical Pipe - 10 Frame includes 3 Cross-over Kits for 2⅜ OD Mounting Pipes - 12 Frame includes 4 Cross-over Kits for 2⅜ OD Mounting Pipes - Includes Hardware to attach to 2⅜ - 4½ OD Tower Legs - Stabilizing Rod included - Mounting Pipes ordered separately SHWF10 SHWF12 10 Face 12 Face Wireless Frame with Slope Adjustment - 10 Frame includes 3 Cross-over Kits for 2⅜ OD Mounting Pipes - 13 Frame includes 4 Cross-over Kits for 2⅜ OD Mounting Pipes - Includes Hardware to attach to 2⅜ - 4½ OD Tower Legs - Stabilizing Rod included - Mounting Pipes ordered separately SH10032 SH Pipes/10 Face 4 Pipes/13 Face Slope Adjustment: From vertical to 6 Leg-Slope

27 23 LATTICE & GUYED TOWER Slim Line Wireless Frame - All Frames include 4 Cross-over Kits for 2⅜ OD Mounting Pipes - Includes Hardware to attach to 4½ OD Tower Legs only - Stabilizing Rod included with 10 Frame - (2) Stabilizing Rods included with 12 and 15 Frames - Mounting Pipes ordered separately SH10563 SH10564 SH10574 SH216-H 10 Frame 12 Frame 15 Frame Saddle w/ Hardware 4 Sector Rotatable Tower Platform with 12 Frame - Interface designed for top-of-tower - Includes (9) Cross-over Kits for Mounting Pipes - Mounting Pipes ordered separately SH Sector Rotatable Platform 12

28 LATTICE & GUYED TOWER 24 3 Sector Rotatable Tower Platform with 12 Frame - Interface designed for top-of-tower - (9) Cross-over Plates included for Mounting Pipes - Mounting Pipes ordered separately SH Sector Rotatable Platform 12 Co-Locate Platform for Lattice Tower with 15 Frame 15 - Adjusts to fit Vertical to 6 Leg-Slope - Fits 1.9-7½ OD Pipe Angle 2½ - 8 (3-leg) Angle 2½ - 6 (4-leg) - Fits Tower Face widths from Includes (12) Cross-over Plates for Mounting Pipes - Mounting Pipes ordered separately SH10420 Co-Locate Platform

29 25 LATTICE & GUYED TOWER Low Profile Platform for Lattice Tower with 15 Frame - Fits 1.9-7½ OD Pipe Angle 2½ - 8 (3-leg) Angle 2½ - 6 (4-leg) - Fits Tower Face widths from Adjusts to fit Vertical to 6 Leg-Slope - Includes (12) Cross-over Kits for Mounting Pipe - Mounting Pipes ordered separately SH15155 Low Profile Platform 12 Round Platform for Guyed Tower - Fits 1¼ - 2⅞ OD Pipe Angle up to 2½ (3-leg) - Fits Tower Face widths Includes (9) Cross-over Kits for Mounting Pipe - Mounting Pipe ordered separately SH Round Platform

30 ROOFTOP/WALL MOUNTS 26 Face Width Non-Penetrating Rooftop Frames - Designed for 3 or 4 Antenna configuration - Includes U-Bolt Hardware - Blocks ordered separately - Rubber Mats ordered separately - Mounting Pipes ordered separately SHNPF7 SHNPF10 SHNPF12 7 Face 10 Face 12 Face 8 7 Non-Penetrating Tripod Base - Includes Collars to fit 2⅜ - 4½ OD Pipe Masts - Pipe Mast ordered separately - Blocks ordered separately - Rubber Mats ordered separately SHBTF-K2K4 Non Penetrating Tripod Base 7 3

31 Were fully equipped to handle all of your needs www steelheadm ls.com Copyright / Steelhead Metal & Fab / All Rights Reserved ALONG WITH STEELHEAD S FULL-LINE OF COMPONENT PRODUCTS FOR THE WIRELESS INDUSTRY, WE ALSO DESIGN AND PRODUCE: Wireless Structures Self Support Towers Tapered Monopoles Pipe Poles Commercial Structural Steel Support Posts Frames Utilities Sub-Station Steel Transmission Towers Transmission Poles D.O.T. Sign Bridges VMS Poles and Bridges Break-away Sign Supports Call the experts at Steelhead for a free quote on all your Steel Applications! Local: Fax: or Toll Free: For Hardware and Accessories look to Steelhead s new H & A Catalog!

32 27 ROOFTOP/WALL OP/WALL MOUNTS Tripod for Wireless Mount - 2⅜ Mast size - Total height ⅜ OD SH15166 Tripod Mount Uses ¾ Anchor Bolts 62½ Hole-to-Hole Tripod Microwave or Wireless Mount - 4½ Mast size - Total height 12 - Includes (5) Step-Bolts 5 4½ OD SH10594 Tripod Mount Uses ¾ Anchor Bolts 62½ Hole-to-Hole

33 ROOFTOP/WALL MOUNTS 28 SH10229: 5 SH13652: OD Small Non-Penetrating Roof Mount 3 Base - Includes Pipe Mast - Blocks ordered separately - Rubber Mats ordered separately SH13652 SH x 3 Base with 60 Mast 3 x 3 Base with 30 Mast 3 SQ. 5 2⅜ OD Small Non-Penetrating Roof Mount 5 Base - Overall height 8 - Includes Pipe Mast - Blocks ordered separately - Rubber Mats ordered separately SH x 5 Base with 96 Mast 5 SQ

34 29 ROOFTOP/WALL OP/WALL MOUNTS Non-Penetrating Sloped Roof Mount - Will work on Roofs from flat to 45 pitch - Can use 2⅜ - 3½ OD Pipe Mount - Blocks ordered separately - Rubber Mats ordered separately - Mounting Pipe ordered separately SH15174 Non Pen Sloped Roof Mount Tri-Sector Adapter for Pipe Mast - Includes U-Bolt Hardware - Mounting Pipe ordered separately SH10460 SH ½ to 4½ Pipe Mast 5 to 6 Pipe Mast 2⅜ OD pipe mount Shaded Area Included in Kit

35 ROOFTOP/WALL MOUNTS 30 Tri-Sector Rooftop Frame 5 Antenna Bay Frame Height Face Width - Designed for 3 or 4 Antenna configuration - 10 Antenna separation - 2⅜ Mounting Pipes ordered separately SH12140 Tri-Sector Rooftop Frame Uses ⅞ Anchor Bolts (Not included) Tri- Sector Rooftop Frame 5 Antenna Bay Frame Height - 13 Face Width - Designed for 3 or 4 Antenna configuration - 12 Antenna separation - 2⅜ Mounting Pipes ordered separately SH10973 Tri-Sector Rooftop Frame 13 A-Bolt Centers Uses ⅞ Anchor Bolts (Not included)

36 31 ROOFTOP/WALL OP/WALL MOUNTS Tri-Sector Non-Penetrating Frame Frame Height Face Width - 12 Antenna separation - 2⅜ Mounting Pipes ordered separately - Blocks ordered separately - Rubber Mats ordered separately SH12476 Rooftop Frame 12 Single-Sector Rooftop Mount - 8 Height - 11 Face Width - Includes (4) Cross-over Kits for Mounting Pipes - 2⅜ Mounting Pipes ordered separately SH10909 Rooftop Mount 7 center to center Uses ½ Anchor Bolts (Not included) Multi-Sector Rooftop Mount - Height adjustable up to Face Width - Includes (12) Cross-over Kits for Mounting Pipes - 2⅜ OD Mounting Pipes ordered separately SH10908 Rooftop Mount 12 6 center to center Uses ½ Anchor Bolts (Not included)

37 ROOFTOP/WALL MOUNTS Water Tank Antenna Support Frame - 6 Height - 10 Face Width - 10 Antenna separation - Includes (3) 2⅜ OD x 6 Mounting Pipes 6 center to center spacing for ⅝ Anchor Bolts (Not included) SH12061 Antenna Support Frame 5 2⅜ OD Water Tank Mount - Total Height 8 SH10572 Water Tank Mount 4 center to center Uses ½ Anchor Bolts (Not included) Water Tank Mount - Fits 2⅜ OD or 4½ OD Pipe - U-Bolts included in Kit - Mounting Pipe ordered separately SH11677 Water Tank Mount

38 33 ROOFTOP/WALL OP/WALL MOUNTS Wall Mount Frame - Includes Cross-over Plates and Mounting Hardware for installing (4) Pipes - 6 Height Face Width - 2⅜ OD Mounting Pipes ordered separately SH15192 Wall Mount Frame Wall Mount Kits SH11082 SH10129 SH2019 Slider Kit for 2⅜ OD Pipe Wall Mount Kit for 2⅜ OD Pipe Wall Mount with 12 Standoff for 2⅞ OD Pipe SH11082 SH10129 SH2019

39 ROOFTOP/WALL MOUNTS 34 Parapet Wall Mount SH10418 Parapet Wall Mount Slider Bracket - Includes U-Bolts & Mounting Hardware - Mounting Pipe ordered separately SHWM-2 SHWM-3 Wall Mount Slider For 2-3/8" OD Pipe Wall Mount Slider For 3-1/2" OD Pipe

40 35 ROOFTOP/WALL OP/WALL MOUNTS Hardware Kits for Wall Mounts Hollow or Solid Walls - Brackets ordered separetly SH15193 SH15194 Hollow Wall Hardware Kit Solid Wall Hardware Kit SH15193 Hollow Wall Hardware (Bracket Not Included) SH15194 Solid Wall Hardware (Bracket Not Included) Corner Wall Mounts - Mounting Pipe ordered separetly SH20156 SH11435 Corner Wall Mount for 2-3/8 O.D. pipe Corner Wall Mount for 4-1/2 O.D. pipe

41 ROOFTOP/WALL MOUNTS 36 3 Standoff Wall Mount - 2⅜ Mounting Pipe ordered separately SH Standoff Wall Mount Custom Antenna Frame with RFP Support SH12083 Custom Antenna Frame

42 37 ROOFTOP/WALL OP/WALL MOUNTS Rooftop Bridge Kits - Includes (3) Run-specific Sleepers and Assembly Hardware SH SH1543 SH Run Rooftop Bridge Kit 8 Run Rooftop Bridge Kit 12 Run Rooftop Bridge Kit Straight Splice SH SH1543 SH1596 Straight Splice for 4 Runs Straight Splice for 8 Runs Straight Splice for 12 Runs 45 Splice SH1573 SH1574 SH Splice for 4 Runs 45 Splice for 8 Runs 45 Splice for 12 Runs Shaded Area Included in Kit

43 ROOFTOP/WALL MOUNTS 38 PVC Sleepers SH1585 SH1598 SH1599 SH1600 PVC Sleeper 96 (No Holes) PVC Sleeper 22 4 Run PVC Sleeper 32 8 Run PVC Sleeper Run Rooftop Hood Entry SH11177 Rooftop Hood Entry Plain End Pipe - Galvanized STHD248 Plain End Pipe, 2⅜ x 48 STHD263 Plain End Pipe, 2⅜ x 63 STHD272 Plain End Pipe, 2⅜ x 72 STHD284 Plain End Pipe, 2⅜ x 84 STHD296 Plain End Pipe, 2⅜ x 96 STHD2114 Plain End Pipe, 2⅜ x 114

44 39 COAX SUPPORT PORT & PROTECTION Coax Ladder - Rung accommodates for both ⅜ Hardware or Snap-ins - Angle Member attaching Hardware provided with Kit - SH10022 Round Member - SH10019 Universal Hardware Kit - We can also Custom-Kit a Coax Ladder for you! SHCL106 SHCL109 SHCL1012 SHCL206 SHCL209 SHCL Run Coax Ladder 10 9 Run Coax Ladder Run Coax Ladder 20 6 Run Coax Ladder 20 9 Run Coax Ladder Run Coax Ladder Coax Wall Covers - Accommodates for both ⅜ Hardware or Snap-ins SH10246 SH10565 SH Run Wall Cover 8 Run Wall Cover 4 Run Wall Cover

45 COAX SUPPORT & PROTECTION 40 Climbing Ladder Coax Support Bracket SH1238 Coax Support Bracket Monopole Coax Support Bracket & Cover - Accommodates for 12 runs of up to 1⅝ Coax - Banding & Clips ordered separately SH10410 SH10046 Coax Support Bracket & Cover Brackets Only

46 41 COAX SUPPORT T & PROTECTION I N Universal Snap-In Bracket - Accommodates for ⅜ Hardware or Snap-ins 12 or 15 runs of up to 1⅝ Coax SH10020 Fits 2-4 Pipe & 2 x 2-4 x 4 Angle SH10060 Fits 4-8 Pipe & 4 x 10 Angle Universal Standoff Bracket - Accommodates for ⅜ Hardware or Snap-ins 6 runs of up to 1⅝ Coax SH11200 Fits 1½ x 1½ to 4 x 4 Angle And 1.90 OD to 4 ½ OD Pipe Cluster Support Brackets SH10635 Cluster Support Bracket 7 run SH11885 Cluster Support Bracket Large 18 run Version c/w 2-5 OD Angle Member Attach. SH11039 Cluster Support Bracket Large 18 run Version SH11203 Cluster Support Bracket Large 18 run Version c/w Hinge (not shown)

47 COAX SUPPORT & PROTECTION 42 Mini Cluster Block SH11202 Mini Cluster Block Kit of 10 Universal Round Member SH10180 Universal Round Member Extensions for Solid Ice Bridge and Grip Strut SH SH1133 SH13208 SH Extension for 12 wide Solid Ice Bridge 2 Extension for 24 wide Grip Strut Splice for 2 wide Grip Strut

48 43 BRIDGE KIT K T COMPONENTS SHBK2410-BS SHBK2410-DB (2) SHCAP3 3 Pipe Cap (2) SH Cantilever Kit Grated Bridge Channel (1) SHGBC x 10 Gripstrut (2) SHTK224 Trapeze Kit 2 Tier 24 Wide Pipe Sleeve (2) SH BS Pipe Column or (2) SH DB Columns Cantilever (2) SH349 Formed Channel for pipeheads 24 (1) SHGBC x 10 (4) SH508 Pipe Sleeve Gripstrut Trapeze Kit Vertical Trapeze Kit (3) SHTK224 3 Tier Trapeze Kit 2 Tier 24 Wide (4) SH10012 Pipe Column 18 Direct Burial

49 BRIDGE KIT COMPONENTS ON NTS 44 Bridge Channels - Grating and Solid SHGBC2410 Grating Style 24 x 10 SHGBC2412 Grating Style 24 x 12 SHGBC2420 Grip Strut 24 x 20 SHGBC1210 Grip Strut 12 x 10 SHGBC1212 Grip Strut 12 x 12 SH501 Bridge Channel 12 x 10 11ga. SH502 Bridge Channel 12 x 5 11ga. Cantilevers SH Cantilever SHC12K 12 Cantilever SH17841 Splices and Extensions SH10856 Splice for 24 Grip strut SH503 Splices for Solid 12 Bridge SH504 Splices for Solid 12 Bridge SH505 Corner Filler SH Bridge Support Angle to Wall SH Bridge Channel for Pipe Heads SH508 Pipe Sleeve SH Channel for Pipe SH10317 Grip strut Splices 24 Pipe Columns SH130 Direct Burial SH126 Anchor Bolt 10 SH x 18 SH11419 Anchor Bolt Style SH with Square Base Plate SH Anchor Bolt Style SH Anchor Bolt Style SH Anchor Bolt Style SP Anchor Bolt Style AB126 Anchor Bolt Cluster 12 Bridge Trapeze Kits SHTK112 Z Bracket Styles / 1 Tier 12 Wide SHTK212 Z Bracket Styles / 2 Tier 12 Wide SHTK312 Z Bracket Styles / 3 Tier 12 Wide 24 Bridge Trapeze Kits SHTK124 Z Bracket Styles / 1 Tier 24 Wide SHTK224 Z Bracket Styles / 2 Tier 24 Wide SHTK324 Z Bracket Styles / 3 Tier 24 Wide Vertical Trapeze Kit (3 Tier) SH11847 Angle Style / 3 Tier 24 Wide Under Bridge Coax Support SH10124 Snap-in Hanger 12 runs, Horizontal SH10124

50 45 HEAVY DUTY Y BRIDGE KIT SUPPORT X Brace for Bridge Kits SH10232 SH10934 SH Wide X Brace for Bridge Kits 3 Wide X Brace for Bridge Kits 4 Wide X Brace for Bridge Kits Stabilizer Kit for Pipe Column SH593 Stabilizer Kit

51 EQUIP. PLATFORMS & RACKSR 46 Equipment Rack - 15 DB Post - 8 Width SH10103 Equipment Rack These are two pre-kitted examples of Equipment Racks. At Steelhead, we can custom configure an Equipment Rack to meet any application. Telco-PPC Rack for Platform - 8 Height - 6 Width SH14974 Equipment Rack for Platform

52 47 EQUIP. PLATFORMS & RACKS S 10 x 16 Equipment Platform SH x 16 Equipment Platform 12 x 20 Equipment Platform SH x 20 Equipment Platform

53 EQUIP. PLATFORMS & RACKSR x 15 Modular Platform - Adjustable foot weldments - Can be made to any size divisible by 2½ and 5 SH x 15 Modular Platform 2½ 5 Equipment Platform with 4 Jacks - Adjusts to any ground conditions SH13247 SH13248 SH13249 SH x 4 with 4 Jacks 4 x 8 with 4 Jacks 4 x 12 with 4 Jacks 9 x 15 with 4 Jacks

54 49 EQUIP. PLATFORMS & RACKS S Adjustable Equipment Platform - Designed to span the Parapets of Rooftops - Adjustable from 22 to 40 - Bolt patterns can be adjusted to fit any size Radio Cabinets SH SH SH Attachments for SH12599 SH13138 Platform Support Kit SH SH13662 Side Mounted Telco Rack SH13139 Platform Support Kit SH13669 Pier Adapter Kit SH13140 Antenna Mounting Kit

55 EQUIP. PLATFORMS & RACKSR 50 Micro Cell Vault Call for Further Details 8 x 10 Utility Vault Call for Further Details

56 51 CUSTOM APPLICATIONS A O S Custom Platform Example of a Custom Application to support a Shelter in an area that experiences adverse weather. Custom Platform Another example of a Custom Application meeting the stringent requirements of the U.S. Coast Guard.

57 P.O. Box 3850 Salem, OR *Phone: * Fax: BUSINESS INFORMATION AND CREDIT APPLICATION COMPANY NAME: SHIPPING ADDRESS: CITY STATE ZIP MAILING ADDRESS: CITY STATE ZIP PHONE NUMBER: FAX NUMBER: HOW LONG IN BUSINESS: TAX ID#: FORM OF BUSINESS ORGANIZATION: SOLE PROPRIETOR PARTNERSHIP CORPORATION LLC PURCHASE ORDER REQUIRED: YES NO ACCOUNTS PAYABLE MANAGER/CONTACT PHONE# CREDIT REFERENCES (must be current suppliers): FIRM NAME: FAX: FIRM NAME FAX: FIRM NAME: FAX: BY SIGNING BELOW, THE UNDERSIGNED INDIVIDUAL GRANTS PERMISSION TO STEELHEAD METAL & FAB, LLC, TO THE RIGHT TO INQUIRE OF THE ABOVE NAMED REFERENCES FOR THE PURPOSE OF OBTAINING CREDIT INFORMATION. UPON APPROVAL OF CREDIT THE UNDERSIGNED AGREES TO ABIDE BY THE TERMS AND CONDI- TIONS SET FORTH BY THE SELLER AS FOLLOWS: STANDARD TERMS OF SALE: TERMS ARE NET 30 DAYS FROM DATE OF INVOICE UNLESS OTHERWISE STATED. REQUESTS FOR OTHER TERMS MUST BE APPROVED. A LATE CHARGE OF 1.5% PER MONTH (18% PER ANNUM), OR THE MAXIMUM ALLOWABLE BY LAW, WILL APPLY TO ALL PAST DUE INVOICES. IF INVOICES ARE NOT PAID WITHIN TERMS, CREDIT LINE MAY BE WITHDRAWN. IN THE EVENT THAT A DELINQUENT ACCOUNT IS PLACED IN THE HANDS OF A LICENSED COLLECTOR OR AN ATTORNEY FOR COLLECTION, OR SUIT IS INSTITUTED ON THIS ACCOUNT, I (WE) AGREE TO PAY, IN ADDITION TO THE AMOUNT OF THE DELINQUENT AMOUNT AND INTEREST, COURT COSTS, COLLECTOR S AND / OR ATTORNEY S FEES. SIGNATURE TITLE DATE Member of NACM The National Association of Credit Managers

58 NOTES

59 Terms and Conditions 1. Payment Terms. The gross amount of the invoice is due within 30 days from invoice date. Discount terms (if applicable) are shown on the reverse side of this document. Buyer agrees to pay at the rate of one and one half percent (1-1/2%) per month on all invoices not paid within the selling terms. Payments will be applied first to service charges invoiced to the date of payment on all outstanding purchase invoices and the balance, if any, to the oldest purchase invoice then outstanding. 2. Invoices. All materials and goods are billed on published weights, areas, size and lengths, and all weighing will be by theoretical weight of ASTM, which shall govern all settlements. All quotations are subject to prior sale unless otherwise specified in writing by Steelhead Metal & Fab,LLC, ( Steelhead ). 3. Shipments. If Buyer fails to make any payment when due Steelhead may in addition to any other right or remedy, cancel or stop shipment in transit until satisfactory arrangements have been made. 4. Delays. Steelhead shall not be responsible or liable for failure to fill any order or orders when failure is due to: earthquakes, fires, floods, riots; or other civil disorder; any act of war; str kes, mill shortages; freight embargoes or transportation delays; shortages of labor; fuel or power; inability to secure materials or supplies at current prices or on account of shortages thereof; acts of God or of any public enemy; any existing or future statute, rule regulation, order, or act of the federal State or local governments (or agencies thereof) affecting the conduct of Steelhead s business; any other cause beyond Steelhead s reasonable control, whether affecting the procurement, production or transportation of the particular order. 5. Security interest. Steelhead shall retain a security interest in all materials and goods until Buyer makes payment in full, Buyer by acceptance of the goods and materials described on the face of this document, grants to Steelhead a security interest in all other inventory now or hereafter owned or possessed by the buyer to secure payment of the purchase price of the goods and materials. Buyer agrees within twenty-four (24) hours notice from Steelhead to execute the appropriate UCC financing statements to evidence the security interests of Steelhead. 6. Risk of loss. Risk of loss or damage to goods shall be upon Buyer upon delivery by Steelhead to the carrier, F.O.B. shipping point (or if delivered by Steelhead vehicles F.O.B. jobsite) additionally 7. Inspection claims. Buyer shall inspect material against shipping papers upon delivery and unloading at destination. No claims for shortages or damaged material will be valid or recognized by Steelhead unless written notice specifying the nature and extent of such shortage or damage is mailed to Steelhead within five (5) days from the date of delivery accompanied by the original freight bill, with notation by the authorized agent of the carrier as to the items and quantities short or damaged. When delivery is by a Steelhead truck, all claims for shortages and damaged material must be mailed to Steelhead within 72 hours of the date of delivery. In no event shall Steelhead be responsible for or liable for any incidental, special, or consequential damage or commercial loss of any type or nature by reason of such shortage or damaged materials. 8. Limited Warranty. Steelhead warrants only to buyer that the materials shipped under any order conform to the description on the face thereof, subject to tolerances and variations consistent with usual and customary trade practices. Except for title, no other warranties which extend beyond the description in respect to the materials, and the above warranty is expressly made in lieu of any and all other warranties express, implied or statutory, including the warranties of merchantability and fitness for a particular purpose or use, and no express or implied warranties except as above stated shall apply to goods or materials sold by Steelhead and no waiver alterations or modifications of the foregoing shall be valid unless expressly made in writing and signed by an officer of Steelhead. Should any items supplied by Steelhead fail to conform to the description, Steelhead s liability shall be limited to repair or replacement of the item or refund of the purchase price, at Steelhead s option, if; (1) Buyer gives Steelhead written notice specifying in detail the nonconformity or defect within ten (10) days from the date of delivery; (2) Buyer shall at it s expense within ten (10) days after request return the items to Steelhead s yard; and (3) Steelhead inspectors determine in fact that the items are nonconforming or defective; (4) terms of payment have been fully met. 9. Taxes. All prices quoted by Steelhead are exclusive of all city, state and federal excise taxes, including, but without limitation, taxes on manufacture, sales, receipts, gross income, occupation, use and similar taxes. 10. Remedies. All purchases shall be governed by the uniform commercial code of the State of Oregon. 11. Agreement of sale. Conditions of any order by buyer which are inconsistent with the terms and conditions hereof shall not be binding on Steelhead and shall not be considered applicable to the sale or shipment of any items by Steelhead unless expressly agreed to in writing and signed by an executive officer of Steelhead. 12. Attorney fee provision. Steelhead shall be entitled to its reasonable attorney s fees in any effort to enforce this agreement whether or not a lawsuit is mitigated. Should suit action or other proceeding be instituted to collect any amount due, Steelhead, shall be entitled to recover from the other party reasonable attorney fees in both trial and appellate courts. 13. Assignment. Buyer may not assign or delegate the performance of any of the provisions of this agreement without Steelhead s prior written consent. Signature of Owner/Officer X Date Member of NACM The National Association of Credit Managers

60 Were fully equipped to handle all of your needs Copyright / Steelhead Metal & Fab / All Rights Reserved ALONG WITH STEELHEAD S FULL-LINE OF COMPONENT PRODUCTS FOR THE WIRELESS INDUSTRY, WE ALSO DESIGN AND PRODUCE: Wireless Structures Self Support Towers Tapered Monopoles Pipe Poles Commercial Structural Steel Support Posts Frames Utilities Sub-Station Steel Transmission Towers Transmission Poles D.O.T. Sign Bridges VMS Poles and Bridges Break-away Sign Supports Call the experts at Steelhead for a free quote on all your Steel Applications! Local: Fax: or Toll Free: For Hardware and Accessories look to Steelhead s new H & A Catalog!