OPTIMUM MASCHINEN - GERMANY

Size: px
Start display at page:

Download "OPTIMUM MASCHINEN - GERMANY"

Transcription

1 Conversion instruction Version Adapter kit RT 100/ 150 CNC Illustr. 0-1: RT100 Keep for future reference! GB 13th February 2007 Adapter kit RT 100 /150 CNC ; Version Page 1

2 Contents 1 Safety warnings (warning notes) 1.1 Classification of hazards Proper use Required auxiliary material Packing list RT 100 CNC 3 Packing list RT 150 CNC 4 Assembly RT 100/ 150 CNC 4.1 Assembly on the RT Installation of the step motors 5.1 Wiring RT CNC 7 Appendix 7.1 Copyright Terminology/Glossary Liability claims for defects / warranty Disposal Product follow-up Page 2 Adapter kit RT 100 /150 CNC ; Version th February 2007 GB

3 Safety warnings (warning notes) OPTIMUM 1 Safety warnings (warning notes) 1.1 Classification of hazards We classify the safety warnings into various levels. The table below gives an overview of the classification of symbols (pictograms) and warnings for the specific danger and its (possible) consequences. Pictogram Alarm expression DANGER! WARNING! CAUTION! ATTENTION! Definition/Consequences Imminent danger that will cause serious injury or death to personnel. Risk: A danger that might cause serious injury or death to personnel. Danger of unsafe procedure that might cause injury to personnel or damage to property. Situation that could cause damage to the machine and product and other types of damage. No risk of injury to personnel. INFORMATION Application tips and other important or useful information and notes. No dangerous or harmful consequences for personnel or objects. In the case of specific dangers, we replace the pictogram by or General danger with a warning of injuries to hands, hazardous electrical voltage, rotating parts Glossary of symbols gives additional advices enumerations GB 6th February 2007 Safety warnings (warning notes) Adapter kit RT 100 /150 CNC ; Version Page 3

4 Safety warnings (warning notes) 1.2 Proper use Improper use! WARNING! In the event of improper use of the add-on pieces, it will endanger the user, will endanger the machine and other material property of the operator or user, may affect proper operation of the machine. The attachment parts as conversion kit are provided for engine driven milling works of your machine. The milling machine with the adapter kit must only be placed and operated in dry and ventilated rooms. The handwheels on the driven axis need to be disassembled for safety reasons. If the adapter kit is used in any way other than described above or modified without approval or the company Optimum Maschinen Germany GmbH, the adapter kit is no longer properly used. We do not take liability for any damage caused by improper use. We would like to stress that any modifications to the construction, or technical or technological modifications that have not been authorized by Optimum Maschinen GmbH will also render the guarantee null and void. 1.3 Required auxiliary material Means of shaft lock-down device "Loctite 648, join the shaft". The designation of the parts in the assembly description corresponds to the numbering of the packing list. In order to degrease the shaft, a cleaner for brakes or a corresponding cleaning agent is required. Required tools: Allen key Page 4 Safety warnings (warning notes) Adapter kit RT 100 /150 CNC ; Version th February 2007 GB

5 Packing list RT 100 CNC OPTIMUM 2 Packing list RT 100 CNC Bezeichnung Designation Artikelnummer Anbausatz Item No. assembly kit Netto Gewicht Net Weight Brutto Gewicht Gross Weight Abmessung (Lx B x H) Dimension (L x W x H) CNC - Adapter kit MK RT1 f RT 100 CNC kg 2.5 kg 320 x 285 x 80 mm Nr. No Bezeichnung Description Artikelnummer Article No. Teile Nr. Part No. Grösse Size Abbildung Picture Stck. Qty. 1 Gehäuse Housing RT1CNC Kupplung Clutch RT1CNC Schrittmotor Step motor H280-01EA 2,2 NM 3A Schraube Screw Schraube Screw Kabel Cable wire DIN 4762 M5x15 4 DIN 4762 M5x x 0,75mm 2 3m Prüfer: Verified by: Datum: Date: GB 6th February 2007 Packing list RT 100 CNC Adapter kit RT 100 /150 CNC ; Version Page 5

6 Packing list RT 150 CNC 3 Packing list RT 150 CNC Bezeichnung Designation Artikelnummer Anbausatz Item No. assembly kit Netto Gewicht Net Weight Brutto Gewicht Gross Weight Abmessung (Lx B x H) Dimension (L x W x H) CNC - Adapter kit MK RT1 f RT 150 CNC kg 2.5 kg 320 x 285 x 80 mm Nr. No Bezeichnung Description Artikelnummer Article No. Teile Nr. Part No. Grösse Size Abbildung Picture Stck. Qty. 1 Gehäuse Housing RT1CNC Kupplung Clutch RT1CNC Schrittmotor Step motor H280-01EA 2,2 NM 3A Schraube Screw Schraube Screw Kabel Cable wire DIN 4762 M5x15 4 DIN 4762 M5x x 0,75mm 2 3m Prüfer: Verified by: Datum: Date: Page 6 Packing list RT 150 CNC Adapter kit RT 100 /150 CNC ; Version th February 2007 GB

7 Assembly RT 100/ 150 CNC 4 Assembly RT 100/ 150 CNC OPTIMUM 4.1 Assembly on the RT Unfasten and unscrew the hexagon socket head screw of the handwheel with an Allen key. Handwheel Hexagon socket head screw Illustr.4-1: Unscrew screws Remove the handwheel from the shaft. If you cannot pull it off easily, you can detach the handwheel by slightly knocking on it with a plastic tip hammer. Handwheel Illustr.4-2: Pull off handwheel Take the feather key out of the shaft. Feather key Illustr.4-3: Disassembly of feather key GB 13th February 2007 Assembly RT 100/ 150 CNC Adapter kit RT 100 /150 CNC ; Version Page 7

8 Assembly RT 100/ 150 CNC Stick the housing on the RT, as shown. Housing RT Illustr.4-4: Mount housing Fasten the housing with the three hexagon socket head screws on the RT. Please make sure that the housing is screwed on in a way that the motor is horizontally positioned on the RT. Housing Hexagon socket head screws Illustr.4-5: Fasten screws Shift on half of the clutch with the larger holes on the shaft of the RT, as shown. clutch Illustr.4-6: Fit clutch Page 8 Assembly RT 100/ 150 CNC Adapter kit RT 100 /150 CNC ; Version th February 2007 GB

9 Assembly RT 100/ 150 CNC OPTIMUM Fasten the clutch through the holes of the housing with an Allen key. Holes of the housing Illustr.4-7: Fasten clutch Plug the other half of the clutch on the shaft of the step motor. Clutch Illustr.4-8: Clutch on the motor The clutch should be pushed on the shaft of the step motor as far as possible. Then fasten the clutch with an Allen key. Clutch Step motor Illustr.4-9: Fasten clutch GB 13th February 2007 Assembly RT 100/ 150 CNC Adapter kit RT 100 /150 CNC ; Version Page 9

10 Assembly RT 100/ 150 CNC Align the clutch of the step motor in a way that it fits with the counterpart in the housing. Then put the motor on the housing. Step motor Illustr.4-10: Fit the step motor Fasten the motor with the hexagon socket head screws on the housing. Motor screw Illustr.4-11: Screw the motor Page 10 Assembly RT 100/ 150 CNC Adapter kit RT 100 /150 CNC ; Version th February 2007 GB

11 Installation of the step motors 5 Installation of the step motors OPTIMUM 5.1 Wiring Open the lid of the step engine with a cross slot screwdriver. Screw of the step engine Lid of the step engine Illustr.5-1: Open the lid of the step engine Remove the outer isolation of the cable and make sure that the lower isolation of the single conductor will not be damaged The dismanteled part should have a length of about 6 cm. Outer isolation Screening Cut outer isolation Illustr.5-2: Remove outer isolation Twist the fabric of the shielding. Screening Cable Illustr.5-3: Twist screening GB 6th February 2007 Installation of the step motors Adapter kit RT 100 /150 CNC ; Version Page 11

12 Installation of the step motors INFORMATION! The shielding will be connected to the terminal block of the engine on one side The cables will be peeled off at a length of about 5 mm with insulation stripping tongs Plug and press wire terminations on the ends of the cable Plug the strain relief over the cable Insert the cable through the opening of the cover plate of the step engine Connect the cable to the engine and tighten the strain relief. Terminal block engine The twisted screening goes with the clamping "GND". Screening Illustr.5-4: Terminal block of the engine Fasten the lid of the step engine with the cross slot srewdriver Then cut the cable to the length which is required to connect it to the CNC controller. Lid step engine Illustr.5-5: Screw the lid Connect the cable to the CNC controller as required. Motor Controller A- to A- A+ to A+ B- to B- B+ to B+ GND Strip terminal CNC controller Illustr.5-6: Strip terminal CNC Controller VI INFORMATION! Do not connect a screening or an earthed cable to the CNC Controller. Page 12 Installation of the step motors Adapter kit RT 100 /150 CNC ; Version th February 2007 GB

13 Installation of the step motors OPTIMUM INFORMATION! If the turning direction of one or several step motors for CNC operation via a CNC software is wrong, please exchange the respective connection on the step motor or on the CNC controller. Example: Motor Controller A- to B- A+ to B+ B- to A- B+ to A+ GND GB 6th February 2007 Installation of the step motors Adapter kit RT 100 /150 CNC ; Version Page 13

14 RT CNC 6 RT CNC Abb.6-1: RT CNC Seite/ Page 14 RT CNC Anbausatz RT 100 /150 CNC ; Version Oktober 2008 D

15 RT CNC OPTIMUM Ersatzteilliste - Spare part list Pos. Bezeichnung Designation Menge Zeichnungsnummenummer Artikel- Grösse Qty. Drawing no. Size Item no. D 1 RT100/150 RT100/ / Gehäuse Driver house Schrittmotor Stepmotor 1 23-H280-01EA Kupplung1 Clutch Mitnehmer Driver Kupplung2 Clutch Schraube Screw Schraube Screw 3 DIN 4762 M5x Schraube Screw 4 DIN 4762 M5x Oktober 2008 RT CNC Anbausatz RT 100 /150 CNC ; Version Seite/ Page 15

16 Appendix 7 Appendix 7.1 Copyright The documentation is copyright. All derived rights are also reserved, especially those of translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar means and recording in data processing systems, neither partial nor total. The company reserves the right to make technical alternations without prior notice. 7.2 Terminology/Glossary Term Explanation Adapter kit blow-back proof plastic tip hammer Disassembly Components A plastic tip hammer which is filled with sand which does prevent a spring-back when knocking. Remove, relieve Page 16 Appendix Adapter kit RT 100 /150 CNC ; Version th February 2007 GB

17 Appendix OPTIMUM 7.3 Liability claims for defects / warranty Beside the legal liability claims for defects of the customer towards the seller the manufacturer of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D Hallstadt, does not grant any further warranties unless they are listed below or had been promised in the frame of a single contractual agreement. The processing of the liability claims or of the warranty is performed as chosen by OPTIMUM GmbH either directly or through one of its dealers. Any defective products or components of such products will either be repaired or replaced by components which are free from defects. The property of replaced products or components passes on to OPTIMUM GmbH. The automatically generated original proof of purchase which shows the date of purchase, the type of machine and the serial number, if applicable, is the precondition in order to assert liability or warranty claims. If the original proof of purchase is not presented, we are not able to perform any services. Defects resulting of the following circumstances are excluded from liability and warranty claims: - Using the product beyond the technical options and proper use, in particular due to overstraining of the machine - Any defects arising by one's own fault due to faulty operations or if the operating manual is disregarded - Inattentive or incorrect handling and use of improper equipment - Non-authorized modifications and repairs - Insufficient installation and safeguarding of the machine - Disregarding the installation requirements and conditions of use - Atmospheric discharges, overvoltage and lightning strokes as well as chemical influences The following items are as well not subject to the liability or warranty claims: - Wearing parts and components which are subject to a standard wear as intended such as e.g. V-belts, ball bearings, illuminants, filters, sealings, etc. - Non reproducible software errors Any services which OPTIMUM GmbH or one of its agents performs in order to fulfill in the frame of an additional guarantee are neither an acceptance of the defects nor an acceptance of its obligation to compensate. Such services do neither delay nor interrupt the warranty period. Place of jurisdiction among traders is Bamberg. If one of the above mentioned agreements is totally or partially inefficient and/or null, it is considered as agreed what is closest to the will of the warrantor and which remains in the framework of the limits of liability and warranty which are predefined by this contract. 7.4 Disposal Disposal of used electric and electronic machines (Applicable in the countries of European Union and other European countries with a separate collecting system for those devices). The sign on the product or on its packing indicates that the product must not be handled as common household waist, but that it needs to be delivered to a central collection point for recycling. Your contribution to the correct disposal of this product will protect the environment and the health of your fellow men. The environment and the health are endangered by incorrect disposal. Recycling of material will help to reduce the consumption of raw materials. Your District Office, the municipal waste collection station or the shop where you have bought the product will inform you about the recycling of this product. GB 6th February 2007 Appendix Adapter kit RT 100 /150 CNC ; Version Page 17

18 Appendix 7.5 Product follow-up We are required to perform a follow-up service for our products which extends beyond shipment. We would be grateful if you could send us the following information: Modified settings Experiences with the RT 100 /150 CNC, which could be important for other users Recurring failures Optimum Maschinen Germany GmbH Dr.-Robert-Pfleger-Str. 26 D Hallstadt Phone +49 (0) Fax +49 (0) info@optimum-maschinen.de Page 18 Appendix Adapter kit RT 100 /150 CNC ; Version th February 2007 GB

quantum MASCHINEN - GERMANY

quantum MASCHINEN - GERMANY OPERATING MANUAL Version 1.1 Bench grinder Type Q SM 150 Q SM 175 Q SM 200 Keep for future reference! GB 29 June 2005 Version 1.1 QSM Bench grinder Page 1 Table of contents 1 Safety 1.1 Safety warnings

More information

Exchange of rollers from the XTS-Mover

Exchange of rollers from the XTS-Mover Service documentation for AT901-0050-0550 and AT9011-00x0-0550 Version: Date: 1.0 0.10.017 Table of contents Table of contents 1 Foreword... 5 1.1 Notes on the documentation... 5 1. Documentation issue

More information

Temposonics Magnetostrictive Linear Position Sensors. Temposonics GB-Series Brief Instructions

Temposonics Magnetostrictive Linear Position Sensors. Temposonics GB-Series Brief Instructions Temposonics Magnetostrictive Linear Position Sensors Table of contents. Introduction...3 2. Safety instructions...4 2. Intended use...4 2.2 Forseeable misuse...4 2.3 Installation, commissioning and operation...5

More information

Installation manual wall-mounted distributor

Installation manual wall-mounted distributor EN Installation manual wall-mounted distributor EN 60003233 Issue 11.2016 2016-14-11 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3 Signal words used 4 2

More information

Installation manual portable distributors

Installation manual portable distributors EN Installation manual portable distributors EN 60003206 Issue 11.2016 15/11/2016 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3 Signal words used 4 2 Intended

More information

WATERFLUX 3070 Quick Start

WATERFLUX 3070 Quick Start WATERFLUX 3070 Quick Start Battery powered electromagnetic water meter Electronic Revision ER 4.3.0_ up to ER 4.3.4_ (SW.REV 4.2.2_ up to 4.2.5_) KROHNE CONTENTS WATERFLUX 3070 1 Safety instructions 4

More information

Assembly and Maintenance Manual Type ASNU

Assembly and Maintenance Manual Type ASNU Assembly and Maintenance Manual Type ASNU Hatschekstr.36 69126 Heidelberg Germany Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 30.05.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\_ASNU.docx

More information

Assembly Instructions

Assembly Instructions Drive Technology \ Drive Automation \ System Integration \ Services *2450452_0617* Assembly Instructions Didactics - Gear Unit Technology Helical Gear Unit R57F AD2 Edition 06/2017 2450452/EN SEW-EURODRIVE

More information

Compact System NRGS 11-2 NRGS Original Installation Instructions English

Compact System NRGS 11-2 NRGS Original Installation Instructions English Compact System NRGS 11-2 NRGS 16-2 EN English Original Installation Instructions 810366-05 1 Contents Important Notes Page Usage for the intended purpose...4 Safety note...4 LV (Low Voltage) Directive

More information

Type 3320, Service Manual. Serviceanleitung Service Manuel

Type 3320, Service Manual. Serviceanleitung Service Manuel Electromotive 2/2-way valve Elektromotorisches 2/2-Wege-Ventil Vanne électromotorisée à 2/2 voies Service Manual Serviceanleitung Service Manuel We reserve the right to make technical changes without notice.

More information

Bicolour level gauge. Type BU green/red. D-04-B EN-1 Edition 05/11

Bicolour level gauge. Type BU green/red. D-04-B EN-1 Edition 05/11 Bicolour level gauge Type BU green/red D-04-B-16615-EN-1 Edition 05/11 -itable of contents- 1. Health and safety instructions 4-5 1.1 General health and safety instructions...4 1.2 Unit-specific safety

More information

Assembly and Maintenance Manual Type RSBW

Assembly and Maintenance Manual Type RSBW Assembly and Maintenance Manual Type RSBW Hatschekstr. 36 69126 Heidelberg Germany Tel +49(0)6221 30470 Tel +49(0)6221 304731 info@stieber.de www.stieber.de Stieber Clutch Date of issue: 16/03/2017 GB

More information

Emergency Power Supply for the OMEGA ACTIVE-System. Operating Instructions

Emergency Power Supply for the OMEGA ACTIVE-System. Operating Instructions Emergency Power Supply for the OMEGA ACTIVE-System Operating Instructions Preface Preface These Operating Instructions will help you using the Emergency Power Supply as intended, safely, and advantageously.

More information

RECHARGEABLE POWER OUTAGE LED LIGHT INSTRUCTION MANUAL

RECHARGEABLE POWER OUTAGE LED LIGHT INSTRUCTION MANUAL FL013B_ManualEN_111407.qxp 11/14/2007 11:36 AM Page I RECHARGEABLE POWER OUTAGE LED LIGHT INSTRUCTION MANUAL Thank you for choosing Black & Decker! Go to www.blackanddecker.com/newowner to register your

More information

Assembly and Maintenance Manual Type AS

Assembly and Maintenance Manual Type AS Assembly and Maintenance Manual Type AS Hatschekstr.36 69126 Heidelberg Germany Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 30.05.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\_AS.docx

More information

The information in this instruction manual is subject to modifications without prior notice and is the exclusive property of Zorzini.

The information in this instruction manual is subject to modifications without prior notice and is the exclusive property of Zorzini. Dear Customer, Thank you for choosing a Zorzini S.p.A. product. Zorzini manway doors and manhole covers 1 are designed and manufactured according to the highest standards in regards safety, functionality

More information

Type 3360, Service Manual. Serviceanleitung Service Manuel

Type 3360, Service Manual. Serviceanleitung Service Manuel Electromotive control valve Elektromotorisches Regelventil Vanne de régulation électromotorisée Service Manual Serviceanleitung Service Manuel We reserve the right to make technical changes without notice.

More information

HST -LS Interlocking device (Translation of Original Manual)

HST -LS Interlocking device (Translation of Original Manual) Installation and Operating Manual for Components HST -LS Interlocking device (Translation of Original Manual) HST-LS Ident.-No.: 10268 HST-LS Ident.-No.: 10269 HST-LS, pictured Ident-Nr. 10269 The image

More information

User Manual TABLE MAGNIFIER TL-70. User-friendly Manual ID: #05007

User Manual TABLE MAGNIFIER TL-70. User-friendly Manual ID: #05007 User Manual TABLE MAGNIFIER TL-70 MANUAL DEVELOPED IN GERMANY myhansecontrol.com User-friendly Manual ID: #05007 Contents Overview... 4 Device parts... 5 Scope of delivery/device parts...6 Preface... 7

More information

DC-DC STEP DOWN CONVERTER CV 24/12V - 15 A Pro

DC-DC STEP DOWN CONVERTER CV 24/12V - 15 A Pro User s Manual DC-DC STEP DOWN CONVERTER CV 24/12V - 15 A Pro ACMA115 INTRODUCTION Thank you for choosing a PRESIDENT product. You can be sure that the product you have purchased is one of the best that

More information

Verti Blast. User Manual. Order code: EQLED355

Verti Blast. User Manual. Order code: EQLED355 Verti Blast User Manual Order code: EQLED355 Safety advice WARNING - FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make

More information

Motorized roller MRA50

Motorized roller MRA50 Motorized roller MRA50 Operating Instructions No portion of this documentation may be reproduced or made available to third parties without the express written permission of MTA-Systems GmbH. We have compiled

More information

Operating Instructions

Operating Instructions Translation of the original instructions ONF 16 S / ONF 25 S Oil Mist Filter Operating Instructions PD 0057 BEN/C (1301) EN Table of contents Table of contents 1 About this manual...............................................

More information

Installation and operating instructions. Solar charge controller 10 A / 15 A / 0 A / 30 A PHOTOVOLTAIK - PHOTOVOLTAICS - PHOTOVOLTAIQUE - FOTOVOLTAICA

Installation and operating instructions. Solar charge controller 10 A / 15 A / 0 A / 30 A PHOTOVOLTAIK - PHOTOVOLTAICS - PHOTOVOLTAIQUE - FOTOVOLTAICA PHOTOVOLTAIK - PHOTOVOLTAICS - PHOTOVOLTAIQUE - FOTOVOLTAICA Installation and operating instructions Solar charge controller 10 A / 15 A / 0 A / 30 A EN 74.86 08.4 1. About this manual These operating

More information

EN Operating manual. Motorised zone valve. Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3

EN Operating manual. Motorised zone valve. Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3 EN Operating manual Motorised zone valve Three-way, 22 mm & 28 mm 3PV2, 3PV8 & VRMH3 This manual ensures safe and efficient use of the 3PV2 or 3PV8 force-actuated three-way valve with spring-loaded return

More information

ON SAFEGUARD S ON SAFEGUARD M

ON SAFEGUARD S ON SAFEGUARD M instructions Retrofit option GB ON SAFEGUARD S ON SAFEGUARD M Insulating protective cover Observe additional system documents! General instructions CAUTION Read the operating instructions! The operating

More information

Pump drives. Operator s manual C

Pump drives. Operator s manual C Pump drives GB Operator s manual 27217 - C Operating instruction for pump drives Contents..................................................................Page 1 Safety Instructions........................................

More information

Pressure relief valve

Pressure relief valve Pressure relief valve Operating manual Series DHV 712 Version BA-2015.10.20 EN Print-No. 300 510 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0

More information

Liquid Handling Station

Liquid Handling Station Liquid Handling Station Manual 8.108.8011EN Metrohm AG CH-9100 Herisau Switzerland Phone +41 71 353 85 85 Fax +41 71 353 89 01 info@metrohm.com www.metrohm.com Liquid Handling Station Manual 8.108.8011EN

More information

Operating Instructions K Always on the safe side.

Operating Instructions K Always on the safe side. Operating Instructions K9 4953. Always on the safe side. KaVo Dental GmbH Wangener Straße 78 D-88299 Leutkirch Tel.: 0 75 61 / 86-150 Fax: 0 75 61 / 86-265 A 1 User information...2 A 1.1 Meaning of the

More information

Operating instructions Spray nozzle SDU

Operating instructions Spray nozzle SDU Operating instructions Spray nozzle SDU INDEX Page 1. General... 2 2. Safety... 2 4 A. Nozzles type... 5 B. Nozzles inserts... 5 C. Revision... 5 D. Monitoring... 6 E. Heating... 6 F. Accessories... 6

More information

RADEX -N Composite Operating/Assembly instructions

RADEX -N Composite Operating/Assembly instructions 1 of 14 RADEX -N is a torsionally stiff flexible steel lamina coupling. It is able to compensate for shaft misalignment, for example caused by thermal expansion, etc. note ISO 101. Drawn: 0.05.15 Kb/Wig

More information

TIDALFLUX 2300 F Quick Start

TIDALFLUX 2300 F Quick Start Quick Start Electromagnetic flow sensor for partially filled pipes The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS

More information

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS VARIFUEL2 140-65 MAINTENANCE AND REPAIR INSTRUCTIONS MOTORTECH Gas Regulation P/N 01.50.008-140-65-EN Rev. 06/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction

More information

Assembly and maintenance manual Type FSO, FSO-GR, FS, HPI

Assembly and maintenance manual Type FSO, FSO-GR, FS, HPI Type FSO, FSO-GR, FS, HPI Hatschekstr.36 69126 Heidelberg Deutschland Tel +49(0)6221 30470 Fax +49(0)6221 304731 info@stieber.de www.stieber.de Date of issue: 23.08.2018 GB Revision: 0 U:\EngUsers\!ProduktDoku\1AAA_Einbauerklaerung_Wartungsanleitung_Konformitaetserklaerung\1AAA_Wartungsanleitungen\Orginal_Worddatei\M1124E_0_FSO_FSO-GR_FS_HPI.docx

More information

KeContact P20. User manual

KeContact P20. User manual KeContact P20 User manual Comments to this manual In this manual you will find warnings against possible dangerous situations. The used symbols apply to the following meanings:!! WARNING! Indicates a potentially

More information

ACROBAT SWING STAND MODEL

ACROBAT SWING STAND MODEL Mounting instructions Directions for use ACROBAT SWING STAND MODEL Dr. Mach GmbH u. Co.KG, Flossmannstrasse 28, D-85560 Ebersberg Tel.: +49 (0)8092 2093 0, Fax +49 (0)8092 2093 50 Internet: www.dr-mach.com,

More information

RO Automatic trailer coupling. Repair instructions. 5KPVM02000 Towing Hitch Automatic Rockinger RO244A

RO Automatic trailer coupling. Repair instructions. 5KPVM02000 Towing Hitch Automatic Rockinger RO244A utomatic trailer coupling Repair instructions 5KPVM02000 Towing Hitch utomatic Rockinger RO244 5KPVM02010 Towing Hitch utomatic Rockinger foot operated RO244L Contents 1 General Validity and application

More information

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS

VARIFUEL MAINTENANCE AND REPAIR INSTRUCTIONS VARIFUEL2 200-120 MAINTENANCE AND REPAIR INSTRUCTIONS MOTORTECH Gas Regulation P/N 01.50.008-200-120-EN Rev. 06/2015 Copyright Copyright 2015 MOTORTECH GmbH. All rights reserved. Distribution and reproduction

More information

Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM

Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM Installation and Operating Manual for Tank and Equipment Cleaning Nozzles Series 5TM 150 150 150 This instruction manual contains proprietary information which is protected by copyright laws. No part of

More information

Assembly Instructions

Assembly Instructions Assembly Instructions Kid s Wheelbarrow Model # 84-8 Picture Similar KETTLER International Inc. 355 London Bridge Road Virginia Beach, VA 3453 USA www.kettlerusa.com / parts@kettlerusa.com / 866-804-0440

More information

Installation Instructions (Translation) Marking. Description. Danger, warning and note symbols. Technical data. ANTARES ExtSet.

Installation Instructions (Translation) Marking. Description. Danger, warning and note symbols. Technical data. ANTARES ExtSet. Description Marking The ANTARES ExtSet makes it possible to distribute the Remote I/O ANTARES modules of an explosion-protected Remote I/O system ANTARES among a maximum of 4 metal mounting rails. For

More information

DC Master 24/ A

DC Master 24/ A USERS MANUAL DC Master 24/12 50-60A DC-DC converter MASTERVOLT Snijdersbergweg 93, 1105 AN Amsterdam The Netherlands Tel.: +31-20-3422100 Fax.: +31-20-6971006 www.mastervolt.com ENGLISH Copyright 2015

More information

Installation Power Management Unit Battery Cables and Battery Harness

Installation Power Management Unit Battery Cables and Battery Harness Installation Power Management Unit Battery Cables and Battery Harness Important Safety Messages SAVE THESE INSTRUCTIONS - This manual contains important instructions that should be followed during installation

More information

Mounting and Operating Manual Non-Return valves Swing-Check valves

Mounting and Operating Manual Non-Return valves Swing-Check valves Mounting and Operating Manual Non-Return valves Swing-Check valves END-Armaturen GmbH & Co. KG Oberbecksener Str. 78 D-32547 Bad Oeynhausen Telefon (05731) 7900-0 Telefax (05731) 7900-199 http://www.end.de

More information

DUSTTRAK AEROSOL MONITOR SOLAR POWER KIT MODEL

DUSTTRAK AEROSOL MONITOR SOLAR POWER KIT MODEL DUSTTRAK AEROSOL MONITOR SOLAR POWER KIT MODEL 854060 (USED FOR POWERING ENVIRONMENTAL ENCLOSURE MODELS MODELS 854030, 8535 AND 8537) OPERATION AND MAINTENANCE MANUAL P/N 6008416, REVISION C JUNE 2017

More information

Ordering designation: G(Type) - (Stroke) - (Eye bolt) - (Cable length) - (Options) Legend:

Ordering designation: G(Type) - (Stroke) - (Eye bolt) - (Cable length) - (Options) Legend: General technical data: 1.) Anodised aluminium housing with a connecting rod made of aluminium (in the case of motor types G..B, G..C, G..D and G..E, the connecting rod is Ø18, for all other motor types

More information

Operator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0

Operator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0 Operator s Manual Nitro 750 Nitro 750X Nitro 1000 Nitro 1000X September.27.2018REV0 Table of Contents Introduction...3 Safety.....4 Equipment Requirements......5 What You Have Received. 5 Serial Number...6

More information

Operating manual. High-voltage testing adapter VAS 6558A/30. Operating manual. Customer documentation Revision: 00 Version: 07/2018

Operating manual. High-voltage testing adapter VAS 6558A/30. Operating manual. Customer documentation Revision: 00 Version: 07/2018 CAR-connect GmbH info@car-connect.cc www.car-connect.cc Page 1 of 12 Imprint Title: of high-voltage testing adapter Manufacturer: Copyright: CAR-connect GmbH Am Egelingsberg 8 D-38542 Leiferde Phone:+49

More information

CLAMPEX KTR 603 Operating/Assembly instructions

CLAMPEX KTR 603 Operating/Assembly instructions 1 of 9 The CLAMPEX clamping set is a frictionally engaged, detachable shaft-hub-connection for cylindrical shafts and bores without feather key. Table of contents 1 Technical data 2 2 Advice 6 2.1 General

More information

A company of ThyssenKrupp Elevator. ThyssenKrupp Aufzugswerke. Operating Manual. Oil buffer

A company of ThyssenKrupp Elevator. ThyssenKrupp Aufzugswerke. Operating Manual. Oil buffer A company of ThyssenKrupp Elevator ThyssenKrupp Aufzugswerke Operating Manual Oil buffer OPERATING MANUAL Printer s imprint All rights reserved. Copyright by: THYSSENKRUPP AUFZUGSWERKE GMBH P.O. box 23

More information

General operating manual for assembly, commissioning and maintenance of valves and hydraulic manifolds

General operating manual for assembly, commissioning and maintenance of valves and hydraulic manifolds for assembly, commissioning and maintenance of valves and hydraulic manifolds 110210_general_operating_manual 07.2018 Table of contents Contents Page Important information 2 Important safety instructions

More information

Accessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600

Accessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600 Accessories for Wind Power Inverter WINDY BOY PROTECTION BOX 400 / 500 / 600 Installation Guide WBP-Box-IEN103320 IMEN-WBP-BOX Version 2.0 EN SMA Solar Technology AG Table of Contents Table of Contents

More information

Lamp kit. Installation manual SIM 7 series R

Lamp kit. Installation manual SIM 7 series R Lamp kit Installation manual SIM 7 series R9841805 R59770113/01 12/06/2009 Barco nv Simulation Division Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.84.86 E-mail: info@barco.com Visit

More information

Instruction Manual. Ex-Time 40 / 50

Instruction Manual. Ex-Time 40 / 50 Instruction Manual Ex-Time 40 / 50 Contents 1. Introduction 13 2. Safety Advice 13 3. Faults and Damage 13-14 4. Safety Regulations 14 5. Ex-Data 14-15 6. Technical Data 15-16 7. Use and Application /

More information

Operating manual. original operating manual. HDA eco Box 12/24V DC Automatic Dispenser. Translation of the. Item No.:

Operating manual. original operating manual. HDA eco Box 12/24V DC Automatic Dispenser. Translation of the. Item No.: Operating manual HDA eco Box 12/24V DC Automatic Dispenser Item No.: 110 500 900 Translation of the original operating manual Important! Copyright The operating manual is always to be read before commissioning

More information

Contents. Introduction Inspection Notes on Safety Precautions. Chapter 1 Overview Product Overview Names of Parts 2

Contents. Introduction Inspection Notes on Safety Precautions. Chapter 1 Overview Product Overview Names of Parts 2 INSTRUCTION MANUAL Contents Introduction Inspection Notes on Safety Precautions i i ii vii Chapter 1 Overview 1 1.1 Product Overview 1 1.2 Names of Parts 2 Chapter 2 Specifications 5 2.1 Product Specifications

More information

Printed: Doc-Nr: PUB / / 000 / 00

Printed: Doc-Nr: PUB / / 000 / 00 ORIGINAL OPERATING INSTRUCTIONS Hilti HTE-P 33 dispenser It is essential that the operating instructions are read before the tool is operated for the first time. Always keep these operating instructions

More information

Operating instructions Rotary actuators M135 M140 M150 M180. June 2012 / / EN

Operating instructions Rotary actuators M135 M140 M150 M180. June 2012 / / EN Operating instructions Rotary actuators M135 M140 M150 M180 June 2012 / 118614 / EN General information General information Proof of amendment Copyright Subject to alterations Manufacturer Version Date

More information

Original operation instructions GFC escalator gear units FTSST158.1, FTSST180.1, FTSST212.1

Original operation instructions GFC escalator gear units FTSST158.1, FTSST180.1, FTSST212.1 Translation of the Original operation instructions GFC escalator gear units FTSST158.1, FTSST180.1, FTSST212.1 AUMA Drives GmbH Grenzstraße 5 D-01640 Coswig/ Germany Phone: +49 (0) 3523 94 60 Fax: +49

More information

INSTRUCTION MANUAL. I/P Converter DSG BXXY3Z DSG BXXY4Z

INSTRUCTION MANUAL. I/P Converter DSG BXXY3Z DSG BXXY4Z INSTRUCTION MANUAL I/P Converter DSG BXXY3Z DSG BXXY4Z Revision 2.0 3.626 016136 en Page 1/15 Should you have any questions concerning the I/P converter, please contact the Service Department of the Product

More information

Original Operating Manual

Original Operating Manual 2010-10-29 Original Operating Manual Control Panel Comfort for Pedelecs Series 4313 Save for future use! Marquardt GmbH Schlossstraße 16 78604 Rietheim-Weilheim E-mail: marquardt@marquardt.de Website:

More information

Installation and Operation Manual

Installation and Operation Manual 1645 Lemonwood Dr. Santa Paula, CA 93060 USA Toll Free: 1 (800) 253-2363 Tel: 1 (805) 933-9970 rangerproducts.com Ranger Floor Jack Installation and Operation Manual Manual Revision B July 2017 Manual

More information

AC 100. Operating instructions Pneumatic Crimper AC 100. Date of issue: 05/2010. Keep for future use!

AC 100. Operating instructions Pneumatic Crimper AC 100. Date of issue: 05/2010. Keep for future use! Operating instructions Pneumatic Crimper AC 100 Date of issue: 05/2010 Keep for future use! SAFETY SAFETY Basic information The basic prerequisite for ensuring safe use and continuous operation of the

More information

Operating manual. Custom made gearboxes

Operating manual. Custom made gearboxes Operating manual Custom made gearboxes DSS-Nr. 100389549 DSS-Rev. 001 Datum 16.01.2018 Contents Contents 1 General information 3 1.1 Using the operating manual 3 1.2 Warnings in this operating manual 4

More information

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions 1 of 17 is a torsionally rigid flange coupling. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc. BoWex FLE-PA BoWex FLE-PAC Drawn:

More information

Drive Unit e-drive1. Installation instructions 04/2014. English translation of the original German installation instructions

Drive Unit e-drive1. Installation instructions 04/2014. English translation of the original German installation instructions Drive Unit e-drive1 Installation instructions 04/2014 English translation of the original German installation instructions Contents Foreword... 3 Availability... 3 Structural features in the text... 3

More information

Wind Power Inverter WINDY BOY 5000A/6000A

Wind Power Inverter WINDY BOY 5000A/6000A Wind Power Inverter WINDY BOY 5000A/6000A User Manual WB5A-6A-BA-BEN114530 TBEN-WB50-60A Version 3.0 EN SMA Solar Technology AG Table of Contents Table of Contents 1 Information on this Manual.........................

More information

original operating manual Operating manual Translation of the Item-No.: ,

original operating manual Operating manual Translation of the Item-No.: , Translation of the original operating manual Operating manual Item-No.: 015 431 551, 015 431 581 Important! Copyright The operating manual is always to be read before commissioning the equipment. No warranty

More information

Instruction manual and installation guide Traction sheave brake TSB TSB

Instruction manual and installation guide Traction sheave brake TSB TSB Instruction manual and installation guide Traction sheave brake TSB 2000-1 TSB 2000-2 Content Traction sheave brake Page 1. Safety 2 1.1 Explanation of symbols 2 1.2. General safety instructions 3 2. Product

More information

Megohmmeter Test Probe

Megohmmeter Test Probe Megohmmeter Test Probe User Manual ENGLISH www.aemc.com CHAUVIN ARNOUX GROUP Copyright Chauvin Arnoux, Inc. d.b.a. AEMC Instruments. All rights reserved. No part of this documentation may be reproduced

More information

Effective June 2016 New Issue

Effective June 2016 New Issue Voltage Regulators MN225035EN Effective June 2016 New Issue COOPER POWER SERIES QD8 Quik-Drive Tap-Changer Switch Assembly Kit 5740785B13 and Switch Neutral Stationary Assembly Kit 5791646A48 Installation

More information

User Guide. Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC)

User Guide. Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC) User Guide Lubricus Lubrication System LUB-D1/LUB-D2/LUB-D3/LUB-D4 (24 VDC) version 04/2013 Content General Information 3 Warning 3 Scope of Supply 3 Overview 3 General safety details 4 Intended use 4

More information

Sectional and Tilting Door Opener

Sectional and Tilting Door Opener Sectional and Tilting Door Opener Installation Instructions and User Guide 600 800 1000 S/N WARNING Please read the manual carefully before installation and use. The installation of your new door opener

More information

Mod: KLD6-12/35XLAS-N

Mod: KLD6-12/35XLAS-N 12/2011 Mod: KLD6-12/35XLAS-N Production code: 1914070 INSTRUCTION MANUAL LOGIC LINE PLUS HOOD Reseller Stamp for Warranty Dear customer, Above all, thank you for choosing our product and we would like

More information

USE AND INSTALLATION HANDBOOK

USE AND INSTALLATION HANDBOOK Date : 10/02/14 Rev. 01 PR.T : FG006172 USE AND INSTALLATION HANDBOOK DUPLEX-UP CONTROL PANEL FOR 2 ELECTRIC PUMPS WITH CURRENT CONTROL. DUPLEX-UP Via Enrico Fermi 8-35020 Polverara PD Tel.049/9772407

More information

Installation and Operating Instructions for EAS -NC clutch Type 45_. _. _ Sizes 02 and 03

Installation and Operating Instructions for EAS -NC clutch Type 45_. _. _ Sizes 02 and 03 Table of contents: Please read and observe this Operating Instruction carefully! A possible malfunction or failure of the clutch and any damage may be caused by not observing it. Page 1: - Table of contents

More information

ILED Dorado. User Manual

ILED Dorado. User Manual 10NM U-code Medium Intensity Obstruction Light Helideck Status Light 15NM U-code Contents 1. Safety... 3 2. Warranty... 3 2.1 General... 3 2.2 Life span... 3 3. Type plate... 4 4. Product Description...

More information

Bosch Smart Home. Door/Window Contact Instruction Manual

Bosch Smart Home. Door/Window Contact Instruction Manual Bosch Smart Home Door/Window Contact Instruction Manual Start making your home smart! Please be sure to install the Bosch Smart Home Controller first. Please ensure that you have a Bosch Smart Home Controller

More information

Type 2000, 2002, 2012

Type 2000, 2002, 2012 Replacement of valve and seal set Conversion of control function Service Manual We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications

More information

Armon Edero. User manual

Armon Edero. User manual User manual Armon Edero Foreword.... 2 Symbols used 2 Intended use.... 2 About the Armon Edero... 2 Mounting options of the Edero 2 Braces. 3 How to set up the Armon Edero.. 3 How to attach the brace to

More information

OPTIFLUX 2000 Quick Start

OPTIFLUX 2000 Quick Start OPTIFLUX 2000 Quick Start Electromagnetic flow sensor The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS OPTIFLUX 2000

More information

WORKLIGHT LUZ DE TRABALHO LED LED WORKLIGHT MANUAL DE INSTRUÇÕES INSTRUCTION MANUAL FWL-1003 EN PT. tl fx.

WORKLIGHT LUZ DE TRABALHO LED LED WORKLIGHT MANUAL DE INSTRUÇÕES INSTRUCTION MANUAL FWL-1003 EN PT. tl fx. Operation manual and security instructions inside the box. Use safety glasses. Keep this tool away from children. Ford Motor Company trademarks and trade dress used under license to Nine HKG, Ltd. fordmotorcompany.com

More information

DeZURIK M-SERIES MANUAL ACTUATOR

DeZURIK M-SERIES MANUAL ACTUATOR M-SERIES MANUAL ACTUATOR Instruction D10287 February 2017 Instructions These instructions provide information about Manual s. They are for use by personnel who are responsible for installation, operation

More information

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies

Type Operating Instructions. Bedienungsanleitung Manuel d utilisation. 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Type 5404 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation Contents 1 Operating instructions...2 2 Intended use...3 3

More information

CONTENT 1 PICTURE GENERAL... 3

CONTENT 1 PICTURE GENERAL... 3 IP67 CONTENT 1 PICTURE... 3 1.1 GENERAL... 3 2 DIMENSIONS... 4 2.1 SYMBOLS... 5 2.2 PROTECTION FROM ELECTRIC SHOCK... 6 2.3 PROTECTIONS FROM FIRE AND BURNS... 6 2.4 PROTECTION FROM INJURY... 7 2.5 DISPOSING

More information

Operating instructions and spare parts list. Waste powder conveying from recovery container WPS01

Operating instructions and spare parts list. Waste powder conveying from recovery container WPS01 En Operating instructions and spare parts list Waste powder conveying from recovery container WPS01 Documentation WPS01-PP03 Copyright 2006 ITW Gema GmbH All rights reserved. This publication is protected

More information

Tensioning Winder 30. CS9160 Eco Solvent Printers

Tensioning Winder 30. CS9160 Eco Solvent Printers Tensioning Winder 30 User s Guide For Océ CS9050, CS9060 & CS9160 Eco Solvent Printers This page is left blank intentionally 2 AP-40104 - Revision 1.2 20/06/2008 COPYRIGHT NOTICE COPYRIGHT 2008 Océ-Technologies

More information

Operating Instructions

Operating Instructions Operating Instructions Safeguard for future use! Options according to range of application Sample application Checking jig DIX PV 100/150 DIX PV 200/250 Aligning module DIX JM 100 DINSE Inc. 830 Dillon

More information

Important instructions

Important instructions Operation manual Please read this manual, before starting the unit. It contains important notes on commissioning and handling. Keep these instructions for future reference. Be careful even if you pass

More information

LCD video-goggle with 5,8 GHz diversity receiver HIVR 101

LCD video-goggle with 5,8 GHz diversity receiver HIVR 101 Manual LCD video-goggle with 5,8 GHz diversity receiver HIVR 101 EN Index Introduction...3 Service Centre...3 Intended use...4 Package content...4 Symbols explication...5 Safety notes...5 Charge the Lithium

More information

Operation Manual. Battery Charger ARTIKEL CHF CHF-4803

Operation Manual. Battery Charger ARTIKEL CHF CHF-4803 Operation Manual Battery Charger ARTIKEL 30567 - CHF-1216 30568 - CHF-4803 Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved!

More information

SCM CLOCK MOVEMENT 03 USER MANUAL

SCM CLOCK MOVEMENT 03 USER MANUAL SCM CLOCK MOVEMENT 03 USER MANUAL Issue 1.0 22.07.2016 draw 2 TABLE OF CONTENT 1. INTRODUCTION... 4 2. CLOCK MOVEMENTS VERSIONS... 6 3. INSTALLATION... 7 4. TURNING ON AND TURNING OFF... 9 5. SERVICE...

More information

Competence from the Original Equipment Supplier

Competence from the Original Equipment Supplier Workshop Tips Competence from the Original Equipment Supplier GKN Driveline is the world s leading supplier of automotive driveline components and systems. Our global market leadership is based on a strong

More information

METROLOGIC INSTRUMENTS, INC. MX001 Industrial Control Interface Installation and User s Guide

METROLOGIC INSTRUMENTS, INC. MX001 Industrial Control Interface Installation and User s Guide METROLOGIC INSTRUMENTS, INC. MX001 Industrial Control Interface Installation and User s Guide Copyright 2007 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced,

More information

Content Copyright...1 Disclaimer...2 General Advice...3 Safety Instructions...4 Reference Of Legal Regulations For Operation...4 Hints...5 Scope Of De

Content Copyright...1 Disclaimer...2 General Advice...3 Safety Instructions...4 Reference Of Legal Regulations For Operation...4 Hints...5 Scope Of De Version 1.01 (11.10.2013) Installation Instructions DAB / DAB+ Antenna module Articlenr. 39338 VW Golf 6 www.kufatec.de Kufatec GmbH & Co. KG Dahlienstr. 15 23795 Bad Segeberg e-mail: info@kufatec.de Content

More information

UV- TECHNOLOGY. Technical Documentation ELC N6 / ELC N8 / ELC N10

UV- TECHNOLOGY. Technical Documentation ELC N6 / ELC N8 / ELC N10 our name is our principle UV- TECHNOLOGY Technical Documentation ELC N6 / ELC N8 / ELC N10 GB eta plus electronic gmbh Lauterstraße 29, D-72622 Nürtingen, Telefon +49 (0) 70 22-60 02-80, Fax +49 (0) 70

More information

Mini slide EGSC-BS-KF. Operating instructions b [ ]

Mini slide EGSC-BS-KF. Operating instructions b [ ] Mini slide EGSC-BS-KF en Operating instructions 8081968 2017-11b [8081970] Translation of the original instructions EGSC-BS-KF-EN Identification of hazards and instructions on how to prevent them: Danger

More information

Application cup for OptiFlex 2 GM03 manual powder gun

Application cup for OptiFlex 2 GM03 manual powder gun En Operating instructions and spare parts list Application cup for OptiFlex 2 GM03 manual powder gun Translation of the original operating instructions Documentation OptiFlex GM03 application cup Copyright

More information

GHA. Gas-Insulated Switchgear. Gas-Insulated Switchgear. Switchgear extension and replacement of a panel

GHA. Gas-Insulated Switchgear. Gas-Insulated Switchgear. Switchgear extension and replacement of a panel Gas-Insulated Switchgear GHA Gas-Insulated Switchgear Switchgear extension and replacement of a panel During this work, essential parts of the switchgear remain in operation No. AGS 535 066-01 Edition

More information