Grade Marks Tab. Grade Marks Tab
|
|
- Thomasine Greene
- 6 years ago
- Views:
Transcription
1 Grade Marks Tab Default Grade Marks Special Grade Mark Groups Grade Marks by Grade Level Add Grade Mark Group for one Grade Bucket Gradebook Main Screen Grade Marks Tab
2 Grade Marks Tab Default Grade Marks Special Grade Mark Groups Grade Marks by Grade Level Add Grade Mark Group for one Grade Bucket Gradebook Main Screen The Grade Marks tab houses your grading scale for the course. If you do not see the Grade Marks tab, it is due to a configuration option selected by the district. Under the Grade Marks tab you can maintain the students attached to a group of Grade Marks, and update the grading scale attached to a group. The Grade Mark Groups that display in this screen are based upon the Gradebook setup for the district.
3 Default Grade Marks From the Grade Mark Maintenance screen you can view the Default Grade Marks by expanding a Grade Mark Group. You can view the Grade Marks, Students That Use This Group, and the Details in this area. Students will automatically be put in the Default Group when added into a class. Grade Marks The Grade Marks area allows you to view the grading scale for the class.
4 Students That Use This Group The Students That Use This Group area allows you to see the students that are using this grading scale. Details The Details area gives you information related to this Grade Mark Group. Add/Edit Marks The Add/Edit Marks button allows you to modify the Grade Marks used by the course and the scale associated with the selected Grade Marks. This button will only be available when the selected Grade Mark Group is configured to be modified. The button will say View Marks if your district has chosen to not allow modifications.
5 You can set up the scale to use a range of 0.00 through No two Grade Marks can overlap, including using After you have modified the grading scale, you will click on Save.
6 Special Grade Mark Groups A Special Grade Mark Group can be identified by a Y being in the Special? column. Next to that option, every Special Grade Mark Group is also given a Special ID number. The expanded section will show the altered Grade Marks, Students That Use This Group, and the Details. A Special Grade Mark Group allows you to attach specific students to a grading scale. Example Pass/Fail or a Modified Grading Scale for Special Education Students. Assign Students When you have a Special Grade Mark Group selected, you select Assign Students to be able to maintain the students attached to the group.
7 The Assign Students to Special Group screen allows you to select students that should be assigned to this group. Click Save when all necessary students are selected. Students that are assigned to a Special Grade Mark Group will be removed from their previous Grade Mark Group. Grade Marks by Grade Level Grade Marks by Grade Level are setup administratively and students are automatically attached to the group based on their current Grade Level. A Grade Level group can be overridden by a Special Grade Mark Group. There is no way to have a student, which is on a Grade Level group, to be attached to the Default Grade Mark Group.
8 Add Grade Mark Group for one Grade Bucket The Add Grade Mark Group for one Grade Bucket allows you to create a grading scale for one grading period. Access to this button is based upon the Gradebook Configuration for the District. You will select the grading period and then click on Select Grade Marks.
9 You can select the Grade Marks and enter the grading scale. After the grading scale has been entered, you will click Save. The Grade Mark Group attached to a specific Grade Bucket displays on the Grade Mark Maintenance screen.
10 Gradebook Main Screen On the Gradebook Main Screen you can see if students are in a Special Grade Mark Group or Grade Level Grade Mark Group. Area A is an example of a student attached to a Grade Level Grade Mark Group. The (12) indicates that this student is in a Grade Level Grade Mark Group because the number refers to their grade level and appears because there is a Grade Level Grade Mark Group associated with them. Area B is an example of a student attached to a Special Grade Mark Group. The (1) indicates that this student is attached to the Special Grade Mark Group of Pass Fail.
Cardinal Station Plan Change & Sub-Plan Change Instructions
Cardinal Station Plan Change & Sub-Plan Change Instructions A. Entering Plan Change Only or Plan Change and Sub-Plan Change Simultaneously I. Go to the Student Program/Plan page. To access Student Program/Plan
More informationE-Industrial Training Module. User s Manual
E-Industrial Training Module Organisation D Top Software SDN BHD Page 1 Table of Contents Table of Contents... 2 1. Introduction... 3 1.1 System Overview... 3 2.... 4 2.1 User Login... 4 2.2 Update Profile...
More informationUponor MagiCAD Plugin. Juha Nakola
Uponor MagiCAD Plugin Juha Nakola 2 (19) Contents CHAPTER 1. GENERAL... 3 ABOUT THIS DOCUMENT... 3 INSTALLING THE SOFTWARE... 3 Installation... 3 IMPORTANT HINTS... 3 Starting... 3 Adding circuits... 3
More informationGFX2000. Fuel Management System. User Guide
R GFX2000 Fuel Management System User Guide Contents Introduction Quick Start 1 1 Setup General Tab 2 Key or Card 2 Fueling Time/MPG Flag Tab 3 Address/Message Tab 3 Pump Configuration 4 View Vehicle Data
More informationXero User Guide for epages
Xero User Guide for epages Managing Xero Integration Updated 26 th May 2015 ecorner Pty Ltd Australia Free Call: 1800 033 845 New Zealand: 0800 501 017 International: +61 2 9494 0200 Email: info@ecorner.com.au
More informationDriver Vehicle Inspection Reports (DVIR) Guide
Driver Vehicle Inspection Reports (DVIR) Guide Updated 01/31/2018 Table of Contents DVIR Driver Vehicle Inspection Reports (DVIR) in OneView...1 Keys to Maintaining DVIR Compliance...1 1. Ensure that drivers
More informationElectric Circuits Lab
Electric Circuits Lab Purpose: To construct series and parallel circuits To compare the current, voltage, and resistance in series and parallel circuits To draw schematic (circuit) diagrams of various
More informationPMS - Speed Limits, Zones and Signs
PMS - Speed Limits, Zones and Signs Purpose of this Document The purpose of this document is to inform the user on Speed Limits, Speed Zones and Speed Signs. Revision History Version Description Author
More informationIntroducing Uconnect Rewards via MSER!
Introducing Uconnect Rewards via MSER! Effective October 1 st, Mopar and the Uconnect Team will be promoting the first of many services via Mopar Service Excellence Rewards. Customers that have 2013 thru
More informationFieldMaster Logs. Administration and Best Practice Guide. Version 3.0 Revision A November 2017 TRANSFORMING THE WAY THE WORLD WORKS
FieldMaster Logs Administration and Best Practice Guide Version 3.0 Revision A November 2017 TRANSFORMING THE WAY THE WORLD WORKS Legal Notices Trimble Inc. 10368 Westmoor Drive Westminster CO 80021 USA
More informationHow to Activate SiriusXM Integration with WebManager Lite (DeskManager)
How to Activate SiriusXM Integration with WebManager Lite (DeskManager) 1 How to Know if You have the option to have WebManager Lite WebManager Lite is a FREE service to any dealer who has DeskManager
More informationHOW TO ACTIVATE SIRIUSXM INTEGRATION WITH WEBMANAGER & WEBMANAGER LITE
HOW TO ACTIVATE SIRIUSXM INTEGRATION WITH WEBMANAGER & WEBMANAGER LITE Information on how SiriusXM Integration Works for your Dealership With the SiriusXM interface you can activate SiriusXM Demo Service
More informationConfiguring FDMS Nash-North (Datawire) for Credit Card / Debit Card Processing in Retail/Quick Service
One Blue Hill Plaza, 16th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Configuring FDMS Nash-North (Datawire) for Credit Card / Debit
More informationLesson 4 Configuring the system. copy right reserved by GoodWe
51 3. Run the APP EzManage. 4. Series Selection Page: When the APP is first used, it will pair with the inverter automatically when connecting to the inverter s WiFi. If the APP stays at the series selection
More informationIntroduction to Tube and PipeChapter1:
Chapter 1 Introduction to Tube and PipeChapter1: This chapter introduces you to the tube and pipe environment in Autodesk Inventor Professional. Using the tube and pipe environment, you can create rigid
More informationV 2.0. Version 9 PC. Setup Guide. Revised:
V 2.0 Version 9 PC Setup Guide Revised: 06-12-00 Digital 328 v2 and Cakewalk Version 9 PC Contents 1 Introduction 2 2 Configuring Cakewalk 4 3 328 Instrument Definition 6 4 328 Automation Setup 8 5 Automation
More informationGPI (Gas Pump Interface) with Cash Register Express - Integration Manual
One Blue Hill Plaza, Second Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 GPI (Gas Pump Interface) with Cash Register Express - Integration
More informationTripTek Tire Car Kit Installation Procedure
TripTek Tire Car Kit Installation Procedure ANTENNA INSTALLATION 1. Assemble the antenna. Be sure to install the rubber washer and tighten the assembly using a wrench. 2. Magnetically mount the antenna
More informationAppendix X New Features in v2.4 B
Appendix X New Features in v2.4 B Version 2.4B adds several features, which we have grouped into these categories: New Suspension Types or Options The program now allows for solid front axles and for several
More informationDealer Service Instructions for: Safety Recall H37 Gearshift Cable
Dealer Service Instructions for: Safety Recall H37 Gearshift Cable Revised December 2008 Please remove and discard from your files all prior copies of Safety Recall H37 (dated November 2008). The repair
More informationELD Compliant Driver Operating Manual
ELD Compliant Driver Operating Manual Copyright 2017 all rights reserved. Page: Table of Contents System Overview 4 Login 5 Certifying Logs 6 Unidentified Driver Records 8 Requested Edits 9 Dashboard 10
More informationET9500 BEMS Interface Box Configuration Guide
ET9500 BEMS Interface Box Configuration Guide APPLICABILITY & EFFECTIVITY Explains how to install and configure ET9500 BEMS Interface Box. The instructions are effective for the above as of August, 2015
More informationCopyright 2012 Pulse Systems, Inc. Page 1 of 53
Use the Template Tab in the Staff and Physician tables to edit existing Scheduling Templates and use the copy function to create a new template from an existing template. Click anywhere to continue Copyright
More informationPSC1-003 Programmable Signal Calibrator
PSC1-003 Programmable Signal Calibrator Description: The PSC1-003 Programmable Signal Calibrator provides precise calibration of fuel by adjusting fuel control signals. It can be used with naturally aspirated
More informationMANAGING UNIDENTIFIED DRIVING
MANAGING UNIDENTIFIED DRIVING BigRoad fleets now have the ability to enable tracking and claiming for driving events that have been recorded on a truck within their fleet ( Unidentified Driving ). WHAT
More informationParking Permit Program for School Year
Parking Permit Program for 2018-2019 School Year INTRODUCTION: Parking permits will be available for high school students for the 2018/2019 school year at the Community Center parking lot adjacent to Eagle
More informationDual Axis Magnetic Field (Axial and Radial) Sensor
Dual Axis Magnetic Field (Axial and Radial) Sensor DT036 Introduction The Dual Axis Magnetic Sensor facile the measurements of the components of the magnetic field, and demonstrating to the students the
More informationColumn Name Type Description Year Number Year of the data. Vehicle Miles Traveled
Background Information Each year, Americans drive trillions of miles in their vehicles. Until recently, the number of miles driven increased steadily each year. This drop-off in growth has raised questions
More informationFleetOutlook 2012 Release Notes
FleetOutlook 2012 Release Notes Version 7.1 Last Updated: June 15, 2012 Copyright 2012 Wireless Matrix. All rights reserved. TABLE OF CONTENTS Introduction... 2 Updates to Landmark Features... 2 Defining
More informatione-track Certified Driver Operating Manual
e-track Certified Driver Operating Manual Copyright 2016 all rights reserved. Page: Table of Contents System Overview 4 Login 5 Certifying Logs 6 Unidentified Driver Records 8 Requested Edits 9 ECM Link
More information2017 (KL) Jeep Cherokee
Dealer Service Instructions for: Safety Recall S84 / NHTSA 16V-799 Knee Blocker Airbag Assembly November 2016 Models 2017 (KL) Jeep Cherokee NOTE: This recall applies only to the above vehicles built from
More informationCOLUMN HEADING DESCRIPTIONS AND DEFINITIONS FOR COMPLETING SE-4107 Preliminary School Bus Inventory Report (MEIS)
Michigan Department of Education Office of Special Education and Early Intervention Services COLUMN HEADING DESCRIPTIONS AND DEFINITIONS FOR COMPLETING SE-4107 Preliminary School Bus Inventory Report (MEIS)
More informationEnterprise Fleet Management System
Enterprise Fleet Management System University of Wisconsin Portal User Guide Link: https://fleetportal.wi.gov Contents Introduction and Login...2 Getting Started Log-in Page...3 Home Page...4 Completing
More informationMATRIX BY DOMAIN ATHLETIC TRAINING EDUCATION COMPETENCIES, 5TH EDTION FOR THE ATHLEIC TRAINING EDUCATION PROGRAM
MATRIX BY DOMAIN ATHLETIC TRAINING EDUCATION COMPETENCIES, 5TH EDTION FOR THE ATHLEIC TRAINING EDUCATION PROGRAM AT THE UNIVERISTY OF THE INCARNATE WORD Created: 12/5/2011; Updated 7/25/2012, 9/1/5/2012
More informationABB AC500 Technical Help Sheet
ABB AC500 Technical Help Sheet How to setup Communication between Emax Breaker Trip unit and AC500 via ProfiBus. ABB Inc. -1- Revision Date: Feb 17,2009 Objective Using AC500 to communicate to Emax Breaker
More informationModel Building Process
Model Building Process SMT, CHARTWELL HOUSE, 67-69 HOUNDS GATE, NOTTINGHAM, NG1 6BB tel. +44 (0)115 941 9839 fax. +44 (0)115 958 1583 Adding a Shaft Right Click on New Design and select Shaft in Add the
More informationUser Guide Electronic Logging Device
Nero (ELD) On December 16, 2015, the U.S. Department of Transportation ( https://www.transportation.gov/ ) approved the final ruling for the use of s (ELDs) for driver Hours of Service (HOS) and Driver-Vehicle
More informationUniversity of New Brunswick Fall Full-Time Enrolment by Faculty and Year in Program (Head Count)
Fall Full-Time Enrolment by Faculty and Year in Program () Fredericton Continuing Education YR1 1 1 1 YR2 1 1 1 1 1 1 1 1 1 YR3 1 1 2 2 1 1 2 2 2 2 YR4 1 1 1 2 3 2 1 2 2 2 Total 1 1 2 3 3 4 4 3 2 6 5 4
More informationJR XP9303 Programming Guide for the Hangar Size P-51
By Danny Snyder JR XP9303 Programming Guide for the Hangar 9 1.50 Size P-51 This guide will assist in the programming necessary to set up the 1.50 Size Hangar 9 P-51 Mustang, though the information could
More informationHunter Alignment. This alignment education series also helps prepare technicians for the ASE A4 Certification.
Hunter Alignment Hunter offers entry and intermediate level alignment courses throughout the county. The combination of discussion and hands-on lab/shop activities melds theory with reality. This alignment
More informationTitle III (HSI) STEM Grant IPAD CARTS BETHANY J CORDELL
Title III (HSI) STEM Grant IPAD CARTS BETHANY J CORDELL TITLE III (HSI) STEM GRANT Classroom ipad Carts The Title III (HSI) STEM Grant at Hillsborough Community College has purchased several Bretford PowerSync
More informationRDS. For Windows TORSION SPRING CALCULATOR For ROLLING DOORS Version 4 REFERENCE MANUAL
RDS For Windows TORSION SPRING CALCULATOR For ROLLING DOORS Version 4 REFERENCE MANUAL TABLE OF CONTENTS TABLE OF CONTENTS INTRODUCTION CREATING THE WORKING COPY INSTALLATION GETTING STARTED i iii iv v
More informationIDL Dragonfly Manual
2015 IDL-20003 Dragonfly Manual FIRMWARE VERSION 3.00 IRIS DYNAMICS LTD. IDL-20003 Manual IrisDynamics.com V1.00 December, 2015 IDL-20003 Manual IrisDynamics.com V1.00 December, 2015 Unpacking, Setup,
More informationEnterprise Fleet Management System
Enterprise Fleet Management System University of Wisconsin Portal User Guide Link: https://fleetportal.wi.gov Contents Introduction and Login...2 Getting Started Log-in Page...3 Home Page...4 Completing
More informationAtmospheric Crude Tower with Aspen HYSYS V8.0
Atmospheric Crude Tower with Aspen HYSYS V8.0 1. Lesson Objectives Assign petroleum assay to stream Configure column pre-heater Configure crude tower 2. Prerequisites Aspen HYSYS V8.0 Introduction to distillation
More informationFirstData (FDMS) BuyPass Credit Card / Debit Card Processing in Retail/Quick Service
One Blue Hill Plaza, 16th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 FirstData (FDMS) BuyPass Credit Card / Debit Card Processing
More informationDealer Service Instructions for: Safety Recall G15 Rear Wheel Hub Mounting Bolts
Dealer Service Instructions for: Safety Recall G15 Rear Wheel Hub Mounting Bolts May 2007 Models 2007 (MK) Jeep Compass and Patriot 2007 (PM) Dodge Caliber NOTE: This recall applies only to the above vehicles
More informationIntroduction. Figure 1: Labeled picture of the Instron 3367 load frame.
Operation of the Instron Tensile Test Machine With an Existing Method in Bluehill 3 Software Introduction by Andrew E. Frerichs, 3/25/11 Michelle Grawe; 10/6/14 Introduction The Instron device is a displacement
More informationDraft Carts. Chapter 3. Department Buyer User Guide 09/17 Chapter 3 - Page 1. Copyright University of Pittsburgh. All rights reserved.
Chapter 3 Copyright University of Pittsburgh. All rights reserved. 09/17 Chapter 3 - Page 1 Section Objectives At the end of this section, you should be able to: Navigate to Resubmit orders that have been
More informationFord Mustang CH
Installation instructions for part KIT FEATURES DIN radio provision with pocket ISO DIN radio provision with pocket Double DIN radio provision Painted charcoal to match factory dash Ford Mustang 2010-2014
More informationCircuits Puzzles: Administration Instructions and Printable Ballots. SK Partners December 22, 2016
Circuits Puzzles: Administration Instructions and Printable Ballots SK Partners December 22, 2016 This document contains instructions for administering four hands-on puzzles about electrical circuits:
More informationCURRICULUM COURSE OUTLINE
CURRICULUM COURSE OUTLINE Course Name(s): Auto I Grade(s): 10-12 Department: Course Length: Pre-requisite: Technology Education 1 Semester (0.5 Credit) NA Textbook/Key Resource: Modern Automotive Technology
More informationSewage Treatment Sewage Haulers
Sewage Treatment Sewage Haulers User s Manual Sewage Haulers Health District Information System HDIS (Windows Ver. 4.0 ) Copyright 1998 by CHC Software, Inc All Rights Reserved CHC Software, Inc. Specialist
More informationEVG1200W/10A PHplus-R3
PHplus ballasts for optimal lamp operation constant lamp and preheat current even with long cables adjustable operation parameters lamp operation control via RS485 using ModBus or ZCON protocol enhanced
More informationXMC1000 / XMC4400 Motor Control Application Kit
XMC1000 / XMC4400 Motor Control Application Kit Getting Started 2 BLDC Motor Block Commutation with 3 Hall Sensor App (BLDCBCH03) Contents Motor Control Application Kit Composition Getting Started Development
More informationOmnitracs Hours of Service 5.2 External Release Notes. 70-JD071-7 Rev B
Omnitracs Hours of Service 5.2 External Release Notes December 2017 Omnitracs, LLC 717 N. Harwood Street, Suite 1300 Dallas, TX 75201 U.S.A. 2017 Omnitracs, LLC. All rights reserved. Omnitracs is a trademark
More informationInstallation Manual for 1st 228-LC Breath Alcohol Ignition Interlock Devices
1 Contents What is What 3 Description of Connecting Cables at the Control Box 4 Install 1st228-LC 5 Positioning Components Temporarily 5 Control Box 5 Handset 5 Connecting Leads 5 Tracing Ignition Wiring
More informationVOLKSWAGEN. Volkswagen Safety Features
Volkswagen Safety Features Volkswagen customers recognize their vehicles are designed for comfort, convenience and performance. But they also rely on vehicles to help protect them from events they hope
More informationIntroduction. Prerequisites. Tools Required. Bijur Mechanical - Oil Pump - Axis - Timed Pressure Test LAST UPDATED: 11/26/2018
LAST UPDATED: 11/26/2018 Bijur Mechanical - Oil Pump - Axis - Timed Pressure Test Introduction This procedure tells you how to perform a timed pressure test. Perform this test on all HMC and VMC machines
More informationIC Chapter 8. School Bus Drivers
IC 20-27-8 Chapter 8. School Bus Drivers IC 20-27-8-1 School bus drivers and monitors; standards Sec. 1. (a) An individual may not drive a school bus for the transportation of students or be employed as
More informationNAVMAN WIRELESS OFF ROAD TRACKER
NAVMAN WIRELESS OFF ROAD TRACKER USER GUIDE TABLE OF CONTENTS Solution Introduction...3 Tab layout...3 Life cycle of a RUC licence...4 Overview...5 Licences...6 Recorder Readings...8 Reports... 10 Claims...
More informationIdle Timer Controller - ITC Freightliner MT45 Contact InterMotive for additional vehicle applications
An ISO 9001:2008 Registered Company System Operation Idle Timer Controller - ITC805 2013-2018 Freightliner MT45 Contact InterMotive for additional vehicle applications The ITC805 system shuts down idling
More informationCC COURSE 1 ETOOLS - T
CC COURSE 1 ETOOLS - T Table of Contents General etools... 5 Algebra Tiles (CPM)... 6 Pattern Tile & Dot Tool (CPM)... 9 Area and Perimeter (CPM)...11 Base Ten Blocks (CPM)...14 +/- Tiles & Number Lines
More information2012 (WK) Jeep Grand Cherokee SRT8
April 2013 Dealer Service Instructions for: Customer Satisfaction Notification N06 Models 2012 (WK) Jeep Grand Cherokee SRT8 NOTE: This notification applies only to the above vehicles equipped with a 6.4L
More informationCertified Trac Professional VS-1117
VS-1117 Certification Code VS-1117 Vskills certification for Trac Professional assesses the candidate as per the company s need for issue tracking and also project management. The certification tests the
More informationVEHICLE CONTROLS Walk Away Auto Lock*
Walk Away Auto Lock* When you walk away from the vehicle while carrying the remote transmitter, the doors can automatically lock if the following conditions are met: The remote transmitter is within a
More informationWIRELESS BLOCKAGE MONITOR OPERATOR S MANUAL
WIRELESS BLOCKAGE MONITOR OPERATOR S MANUAL FOR TECHNICAL SUPPORT: TELEPHONE: (701) 356-9222 E-MAIL: support@intelligentag.com Wireless Blockage Monitor Operator s Guide 2011 2012 Intelligent Agricultural
More informationMOT Special Notice 07-17: replacement documents, new diesel smoke limits for some vehicles, annual training and assessment reminder
MOT Special Notice 07-17: replacement documents, new diesel smoke limits for some vehicles, annual training and assessment reminder Replacement MOT documents 1. Overview A replacement document is issued
More informationMotor-CAD Circuit Editor
Motor-CAD Circuit Editor Description This document gives a brief description of how to use the Motor-CAD circuit editor. In this case we use the circuit editor to couple the Motor-CAD thermal network to
More informationDealer Service Instructions for: Safety Recall H28 Park Brake Lever
Dealer Service Instructions for: Safety Recall H28 Park Brake Lever October 2008 Models 2007-2008 (KA) Dodge Nitro 2008 (KK) Jeep Liberty NOTE: This recall applies only to the above vehicles equipped with
More informationQuick Reference Guide» Empty Car Request Widget
Quick Reference Guide» Empty Car Request Widget AccessNS Empty Car Request Widget Quick Reference Guide Contents Empty Car Request (ECR) widget...1 The ECR Widget - Requesting Empty Rail Cars...1 The ECR
More informationimach III P1A CNC Control Pendant
www.vistacnc.com - 1 - imach III P1A CNC Control Pendant www.vistacnc.com - 1 - imach III P1A Pendant Manual v. 3.3.1 www.vistacnc.com - 2 - PREFACE Any machine tool, including computer controlled machine
More informationShow Cart: Toggles between carts. Once you select a cart from the dropdown, you are automatically switched to the selected cart.
Normal Cart Guide The Normal Cart makes it easy for customers to select and modify individual carts and adjust the quantity and distribution of specific titles before purchasing. Cart Selection Pick the
More informationIBM CMM Quick Reference Guide
IBM CMM Quick Reference Guide Contents Introduction Prerequisites Requirements Components Used CMM Overview CMM Layout Useful CMM Screens Login Screen System Information Screen Event Log Screen Chassis
More informationOmnitracs HOS Host 4.3v External Release Notes
Introduction Omnitracs HOS Host 4.3v External Release Notes These release notes provide descriptions of new features and fixes addressed in the 4.3 release of Omnitracs Hours of Service (HOS) host application
More informationCCCCO Worksheet CARNEGIE UNITS - SEMESTER. Lecture Lab Lecture
CARNEGIE UNITS - SEMESTER Lecture Lab Lecture Lab 17.5 hours = 1 unit 52.5 hours = 1 unit 18 hours = 1 unit 54 hours = 1 unit 8.8 0.5 26.3 0.50 9 0.5 27 0.5 17.5 1.0 52.5 1.00 18 1.0 54 1.0 26.3 1.5 78.8
More informationPre Built Competition Description, Rules 2.0 and Guidelines. Competition Date: December 2, 2017 Coordinator: Austin Cwiklik
Pre Built Competition Description, Rules 2.0 and Guidelines Competition Date: December 2, 2017 Coordinator: Austin Cwiklik Introduction General Competition Overview Procedures Detailed Competition Overview
More informationFleetOutlook Spring 2012 Release Notes
FleetOutlook Spring 2012 Release Notes Version 7.1 Last Updated: April 10, 2012 Copyright 2012 Wireless Matrix. All rights reserved. TABLE OF CONTENTS Introduction... 2 Updates to Landmark Features...
More informationJet-Tech RoK Copyright 2012 Jet-Tech Motorsport All Rights Reserved
Jet-Tech RoK Copyright 2012 Jet-Tech Motorsport All Rights Reserved Designed exclusively for the Vortex RoK, Super RoK & Junior RoK The JET-TECH RoK screen gives the Main Jet, Needle Clip position and
More information4.1 Flow Rate Verification and Adjustment
4.1 Flow Rate Verification and Adjustment Once the pressure verification is complete (see Chapter 3), the gas flow rate should be verified. Accurate gas flow through the nozzle is critical for achieving
More informationIMPORTANT: A small number of the above vehicles have already been reprogrammed and, therefore, have been excluded from this recall.
Dealer Service Instructions for: Safety Recall No. C33 Reprogram BCM Vehicle Lighting November 2003 Models 2003 (ZB) Dodge Viper IMPORTANT: A small number of the above vehicles have already been reprogrammed
More informationMGI. Gyroscope PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION. Engineering and Technical Teaching Equipment
Engineering and Technical Teaching Equipment Gyroscope MGI PROCESS DIAGRAM AND UNIT ELEMENTS ALLOCATION ISO 9001: Quality Management (for Design, Manufacturing, Commercialization and After-sales service)
More informationHi-Z USB Wireless. Introduction/Welcome
Hi-Z USB Wireless Introduction/Welcome Thank you for selecting the Hi-Z Antennas USB Wireless system. The Hi-Z USB Wireless system provides control functions from a personal computer to operate a Hi-Z
More informationSetting up Vantiv (fka Fifth Third) Tandem Credit Card / Debit Card Processing in Retail/Quick Service
One Blue Hill Plaza, 16th Floor, PO Box 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Voice) 845-920-0800 (Fax) 845-920-0880 Setting up Vantiv (fka Fifth Third) Tandem Credit Card / Debit
More informationCurveMaker HD v1.0 2Ki Programmable Ignition programming software
Contents CurveMaker HD v1.0 2Ki Programmable Ignition programming software Dynatek 164 S. Valencia St. Glendora, CA 91741 phone (626)963-1669 fax (626)963-7399 page 1) Installation 1 2) Overview 1 3) Programming
More informationThe manual of V belt design program
The manual of V belt design program 2009/3/31 Installation 1. Download and unzip the installer of V belt design program. Installation will be started by double-clicking the installer. Follow the instructions
More informationEach dealer to whom vehicles in the recall were invoiced will receive enough Wiring Harness Packages to service about 5% of those vehicles.
April 2003 Dealer Service Instructions for: Safety Recall No. C11 Blower Motor Wiring Models 2002 (DR) Dodge Ram 1500 Pick-up Trucks IMPORTANT: Some of the involved vehicles may be in dealer used vehicle
More informationMCS-BMS-GATEWAY STARTUP GUIDE Covers Model No. FPC-C35
Version 4.2 - Rev. 2017-11-30 5580 Enterprise Pkwy. Fort Myers, FL 33905 MCS-BMS-GATEWAY STARTUP GUIDE Covers Model No. FPC-C35 Office: 239-694-0089 Fax: 239-694-0031 www.mcscontrols.com MCS Total Solution
More informationVEND PROGRAMMING. In order to fully understand the material in this section, become familiar with the following terms:
VEND PROGRAMMING Section 3 Definitions In order to fully understand the material in this section, become familiar with the following terms: 1. Adjustable Wand. The XP wand that rotates on the trolley 90,
More information2009 (DH) Dodge Ram Truck 2500 series (DM) Dodge Ram Truck 4500/5500 series (D1) Dodge Ram Truck 3500 series
Dealer Service Instructions for: Safety Recall J37 Brake Pedal Linkage Clip January 2010 Effective immediately all repairs on involved vehicles are to be performed according to this notification. Rapid
More informationCurveMaker DFS v2.0 Dyna FS Ignition Programming Software
CurveMaker DFS v2.0 Dyna FS Ignition Programming Software Contents Dynatek 164 S. Valencia St. Glendora, CA 91741 phone (626)963-1669 fax (626)963-7399 page 1) Installation 1 2) Overview 1 3) Introduction
More informationThis presentation contains the EDCS Portal related functionalities which a dealer can avail The dealer has 3 login ids with specific authorizations
DEALER TRAINING KIT This presentation contains the EDCS Portal related functionalities which a dealer can avail The dealer has 3 login ids with specific authorizations to sales, service and spares To view
More informationIntroducing the OMAX Generation 4 cutting model
Introducing the OMAX Generation 4 cutting model 8/11/2014 It is strongly recommend that OMAX machine owners and operators read this document in its entirety in order to fully understand and best take advantage
More informationL O S A N G E L E S U N I F I E D S C H O O L D I S T R I C T. Business Services Division Transportation Branch BUS REPLACEMENT PLAN
L O S A N G E L E S U N I F I E D S C H O O L D I S T R I C T Business Services Division Transportation Branch BUS REPLACEMENT PLAN Current Fleet By Organizational Group NUMBER OF VEHICLES (EXCLUDING SCHOOL
More informationLEAP: LSC Evaluation and Achievement Program
LEAP: LSC Evaluation and Achievement Program Instructions for the LSC The LEAP online evaluation system is a tool to evaluate achievement and progress of the 59 LSCs. The program evaluates and helps identify
More informationObjective: Students will investigate rate of change (slope) using spring data from RC cars.
Objective: Students will investigate rate of change (slope) using spring data from RC cars. About the Lesson: In NASCAR, the selection of springs (and spring rate) determines the ride height of the car.
More informationTomTom WEBFLEET Contents. Let s drive business TM. Release note
TomTom WEBFLEET 2.17 Release note Contents Extended WEBFLEET Reporting 2 Reporting Diagnostic Trouble Codes 3 Security features 5 Invoice only interface 7 Default trip mode 8 Navigation map information
More informationApplied BioPhysics Inc
Applied BioPhysics Inc 185 Jordan Rd, Troy, NY 12180 info@biophysics.com ECIS p-flow Peristaltic Pump Manual, rev D. Pump Specifications Maximum flow rate with 3.18mm ID tubing 24ml/min Minimum flow rate
More informationSIEMENS POWER SYSTEM SIMULATION FOR ENGINEERS (PSS/E) LAB1 INTRODUCTION TO SAVE CASE (*.sav) FILES
SIEMENS POWER SYSTEM SIMULATION FOR ENGINEERS (PSS/E) LAB1 INTRODUCTION TO SAVE CASE (*.sav) FILES Power Systems Simulations Colorado State University The purpose of ECE Power labs is to introduce students
More informationSite Technology Device Management and Theft Prevention Plan
Site Technology Device Management and Theft Prevention Plan 2015 2016 Introduction The San Francisco Unified School District strongly believes in providing the necessary resources and tools to support
More information