STRAIGHT RUNNING PLASTIC CHAINS with friction surface. SIDEFLEXING PLASTIC CHAINS with high friction surface 831 VG VG VG 54 55
|
|
- Julianna Page
- 5 years ago
- Views:
Transcription
1 STRAIGHT RUNNING PASTIC CHAINS with friction surface Series 8 VG - 82 VG VG SIDEFEXING PASTIC CHAINS with high friction surface Series 878 TAB VG TAB VG M VG 882 TAB VG M VG - 87 VG APPICATION: FOOD AND BEVERAGE INDUSTRY: PACKAGING INES WITH INCINED AND DECINED CONVEYORS (TRAYS, PET BOTTE PACKS IN HEAT SHRINK FIM, CANS IN HEAT SHRINK FIM) GENERA APPICATION: INCINED AND DECINED CONVEYORS FOR BOXES, BAGS, CRATES. A OUR HIGH FRICTION CHAINS OFFER: ONG WEARIFE OW ENERGY CONSUMPTION HIGH FRICTION PAD. INCINES UP TO 20 ARE POSSIBE EASY TO CEAN DESIGN SPECIA CONFIGURATIONS ON REQUEST INDICATE THE DISTANCE BETWEEN THE RUBBER PADS AT THE TIME OF ORDERING
2 8 VG STRAIGHT RUNNING CHAINS SINGE HINGE WITH HIGH FRICTION SURFACE Ø For 8 VG K25 chains a roller return track is required as the friction pad extends accross the full width of the plate. TRAVE Width Width NGD 8 K25 VG NGD ¼ VG STRAIGHT RUNNING CHAINS DOUBE HINGE WITH HIGH FRICTION SURFACE Ø The return section of the conveyor can be constructed using standard wearstrips or return rollers to support the chain on its return. High breaking load. Heavy duty TRAVE Width Width NGD 82 K750 VG ½ NGD NGD 82 K000 VG ½.25 NGD 82 K200 VG Standard length: 80 pitches (0 ft m) Breaking oad according to Standard ISO DIN 8 54 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0
3 57 STRAIGHT RUNNING CHAINS HEAVY DUTY SINGE HINGE WITH HIGH FRICTION SURFACE 8257 VG The return section of the conveyor can be constructed using standard wearstrips or return rollers to support the chain on its return. High strength Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also BP chains and Flat Top chains TRAVE Width Width NGD 8257 K450 VG ½ 90 ½.95 NGD 8257 K750 VG 08 NGD ½ NGD 8257 K000 VG ½ 2. NGD 8257 K200 VG Standard length: 80 pitches (0 ft m) Breaking oad according to Standard ISO DIN 8 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue
4 878 TAB VG SIDEFEXING CHAINS WITH HINGE FRICTION SURFACE Turning disks can be used, as the chain is designed to turn around a very small curve radius. NOU-S CURVES ARE STRONGY RECOMMENDED TRAVE NGD 878 TAB K25 VG 9 NGD Width mm inch R ¼ TAB VG SIDEFEXING CHAINS WITH HINGE FRICTION SURFACE.5 Ø NOU-S CURVES ARE STRONGY RECOMMENDED TRAVE Width R mm inch NGD 879 TAB K25 VG NGD 879 TAB K25 VG ¼.25 NGD 879 TAB K25 VG NGD NGD 879 TAB K450 VG 245. NGD 879 TAB K450 VG ½.45 NGD 879 TAB K450 VG Standard length: 80 pitches (0 ft m) Breaking oad according to Standard ISO DIN 8 56 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0
5 SIDEFEXING CHAINS FOR MAGNETIC SYSTEM WITH HIGH FRICTION SURFACE 879 M VG Ø One conveyor construction Easy to clean Hygienic concept Easy maintenance TRAVE NGD 879 M K25 VG 5 NGD Width mm inch. R mm ¼ SIDEFEXING CHAINS WITH HIGH FRICTION SURFACE 882 TAB VG High breaking load This chain is particularly suitable where heavier and larger products are conveyed. TRAVE Width Width R NGD 882 TAB K750 VG ½ NGD NGD 882 TAB K000 VG ½ 2.65 NGD 882 TAB K200 VG Standard length: 80 pitches (0 ft m) Breaking oad according to Standard ISO DIN 8 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue
6 882 M VG SIDEFEXING CHAINS FOR MAGNETIC SYSTEM HEAVY DUTY SINGE HINGE WITH HIGH FRICTION SURFACE Ø TRAVE NOU-S CURVES ARE STRONGY RECOMMENDED High breaking load Helps standardising your conveyor constructions Same hinge width available in many chain types, both steel and plastic, also BP chains and flat top chains Note: Plastic magnetic system chains do not have tabs or bevels, it is the Stainless Steel pin in the chain which is attracted by the magnets embedded in the curve. Pin material: Ferritic Stainless Steel Width Width R NGD 882 M K750 VG ½ NGD NGD 882 M K000 VG ½ 2.45 NGD 882 M K200 VG Standard length: 80 pitches (0 ft m) Breaking oad according to Standard ISO DIN 8 58 SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue 6.0
7 SIDEFEXING PATE TOP CHAINS BASE ROER CHAINS 9,05 mm (¾ ) PITCH WITH HIGH FRICTION SURFACE 87 VG NOU-S CURVES ARE STRONGY RECOMMENDED High speed Very high loads onger conveyors Easy maintenance Flights removable ower noise No chain elongation Width R Roller chains Plate Rubber mm inch NGD 87 K750 VG 90 C45 NGD ½ 500 NGD 87 SS K750 VG 9 SS FG 87 K200 VG 72 C45 FG 70 schore A FG 87 SS K200 VG 78 SS Standard length: 80 pitches (0 ft m) Breaking oad according to Standard ISO DIN SYSTEM PAST - CONVEYOR CHAINS-BETS - Issue
STRAIGHT RUNNING CHAINS with low noise accumulation rollers. SIDEFLEXING CHAINS with low noise accumulation rollers LBP LBP LBP
SIGH UNNING CHINS with low noise accumulation rollers Series BP 821 - BP 8257 - BP 831 46 48 SIDFXING CHINS with low noise accumulation rollers Series BP 878 B - BP 879 M BP 882 B - BP 882 M 49 52 PPICION:
More informationSTRAIGHT RUNNING STEEL CHAINS SIDEFLEXING STEEL CHAINS 812/ L/815L 800/802/
STAIHT UNNIN STEE CHAINS Series 812/815-812/815 800/802/805-8157 - 515 16 19 SIDEFEXIN STEE CHAINS Series 881-881O - 881 TAB - 881O TAB 881M - 881 MO - 881 MO - 8857M 8857 TAB - 1874 20 24 A OU STEE CHAINS
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More informationSeries SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More informationPRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationRexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationMay 2009 English Version Issue 3.0
S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationTableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
More informationMay 2011 English Version Issue 3.6
E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power
More informationFinally all the action you were looking for!
Finally all the action you were looking for! System Plast presents an unprecedented range of products. Based on a long experience in the field, System Plast have worked hard on product development. Now
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationDOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
More informationCOMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...
COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading
More informationMulti-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value
Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax
More information21.3 Dimensional drawings
21 K helical bevel geared motors 21.3 Dimensional drawings 21.3 Dimensional drawings In this chapter you can find the dimensions of the geared motors. There is a dimensional drawing for every possible
More informationPERFORMANCE AND KNOW-HOW
Linear and Motion Soutions PERFORMANCE AND KNOW-HOW Nadea represents 50 years of neede and cam foower bearing know-how. Our ong history in design and manufacturing has extended over the years to the products
More information+91-8048762018 Spectra Plast India Private Limited http://www.systemplaast.com/ Spectra Plast India Pvt. Ltd. is a renowned manufacturer and exporter of a comprehensive range of conveyor components and
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More informationFlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains
FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of
More informationThe right chain! Approved Performance from Rexnord. Double pitch roller chains. MODULE_05/GB/2014/08 // No liability accepted for misprints or errors!
Approved Performance from Rexnord Double pitch roller chains Double pitch roller chains Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered
More informationPrecision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections
A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs
More informationmk Roller Conveyors mk Conveyor Technology 240
mk Roller Conveyors mk Conveyor Technology 240 Contents mk Roller Conveyors RBS-P 2065/2066 242 RBS-P 2255 246 RBT-P 2255 250 RBM-P 2255 254 Rollers 258 Application Examples 260 mk Conveyor Technology
More informationPRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
More informationPRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812
More informationRoller chains European type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains European type Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered Pin Case-hardened Bush
More informationRoller chains American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains American type Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered Pin Case-hardened Bush
More informationOur policy is one of continuous research and development. We therefore reserve the right
Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can
More informationClean Line Stainless steel
www.puzzleadvance.com Clean Line Stainless steel operating parts lock systems hinges profile rubber linear systems anti-fadigue mats clamping technology standard elements operating magnets Clean Line With
More informationAir nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others...
Air nozzes Air curtains Bowing off and out Ceaning Cooing Drying Reheating Transporting and many others Air nozzes As a rue, any fat fan or soid stream nozze can be operated with air instead of iquid However,
More informationEPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
More informationChains. By Rexnord. Rexnord Industries, Inc. Visit us on-line at
Chains By Rexnord Rexnord Industries, Inc. Visit us on-line at www.rexnord.com Steel Chains For the Right Application Rexnord is the world s leading manufacturer of TableTop chains and accessories. Rexnord
More informationThe right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Rotary chains Highly robust and durable Rotary chains High Performance from Rexnord. Link cranked shape Roller Shock-resistant, seam-free Bush High surface hardness, hard
More informationThe right chain! Extreme Performance from Rexnord. Leaf chains RexAthletic. MODULE_08/GB/2014/08 // No liability accepted for misprints or errors!
Extreme Performance from Rexnord Leaf chains RexAthletic RexAthletic Extreme Performance from Rexnord. Good corrosion protection, maximum operating reliability Intermediate plate Pin hardened and tempered,
More informationSimplex roller and bush chains with one side extended pin Simplex roller chains with both side extended pins
ROER CHAINS WITH EXTENDED AND HOOW S Simlex roller and bush chains with one side extended in... 63 65 Simlex roller chains with both side extended ins... 66 67 Dulex roller chains with one side extended
More information7 Important information on selection tables and dimension drawings
Possible geometrical combinations Important information on selection tables and dimension drawings. Possible geometrical combinations.. Structure of the tables These tables show geometrically possible
More informationConveyor chains American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Conveyor chains American type Conveyor chains - American type Approved Performance from Rexnord. Fulfils ANSI quality requirements Inner link Carbon steel Roller Carbon
More information01 REFRIGERATED SERVICE COUNTERS body height 865 mm
COUNTERS FOR BEVERAGES 01 REFRIGERATED SERVICE COUNTERS body height 865 mm SURCHARGES instead of a door body height 865 mm Keg and glass door elements Edge protection and reinforced bottom, slide rails
More informationSpartec CONVEYORS DESIGN MANUFACTURE INSTALLATION CONVEYORS
DESIGN MANUFACTURE INSTALLATION PARTS SCRAP PACKAGE BULK HANDLING LOW PROFILE DIE-VEYORS 2 Frame Heavy Duty BELT WIDTH + 1 1/2" 3/4" BELT WIDTH 3/4" 2" 1" BELT WIDTH + 3/4" SECTION VIEW WIDTHS: 2 Thru
More informationBelt Conveyor System. The Just-in-Time (JIT)
24 8 The Just-in-Time (JIT) Belt Conveyor System Success is often measured by efficiency and speed. For Robotunits customers this means always keeping one step ahead regarding the time required for delivery,
More informationLeaf chains BL Series American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Leaf chains BL Series American type Light and medium lifting applications Leaf chains - RexDL Approved Performance from Rexnord. Intermediate link plate High fatigue strength
More informationThe right chain! High Performance from Rexnord. Roller chains Factory standard. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Roller chains Factory standard High Performance from Rexnord. The right chain! Factory standard Roller chains Tailored solutions for specific meets customer needs Inner link
More informationAUTOMOTIVE / INDUSTRY
MARYAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329 web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationChain. Conveyors Transfers (989) Chain Transfers
Chain Conveyors Transfers TRANSFERS Heavy Duty... 231 Pivot Chain Transfer... 231 Reversible Six-Strand Chain Transfer... 231 Standard Models Chain Transfer... 232 CONVEYORS - 229 - Standard Models...
More informationCordweave Conveyor Belt
Cordweave Conveyor Belt Also known as Compound Balanced belting www.wirebelt.co.uk 2 Copyright 2015 Wire Belt Company Inc. Cordweave Conveyor Belt Also known as Compound Balanced belting Wire Belt Company
More informationThe right chain! Approved Performance from Rexnord. Conveyor chains W-Series. MODULE_11/GB/2014/02 // No liability accepted for misprints or errors!
pproved Performance from Rexnord Conveyor chains W-Series Conveyor chains - W-Series pproved Performance from Rexnord. Fulfils NSI quality requirements Link plate Carbon steel Pin Carbon steel, press fit
More informationBelts for the Confectionery Industry. Your business is our business!
NA Your business is our business! Belts for the Confectionery Industry Ammeraal Beltech knows your process for all your belting needs just-in-time delivery www.ammeraalbeltech.com We know your production
More informationQuick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2
Quick Connect Coupings Series ES singe shut-off - The ORIGINAL Quick Connect Coupings of brass or brass MS 58 nicke-pate New hose barb for safe fit of hose an easy assemby Seeve esign protects the couping
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationuni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
More information1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
More information3.25, 4.5, 7.5 Tabletop Conveyor Specifications
3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder
More informationConveying with ease. deniway plate chain conveyor. Plate chain conveyor components (second extended version)
Conveying with ease deniway plate chain conveyor Plate chain conveyor components (second extended version) 1 2 Contents The deniway construction kit 4 Key data 5 Components 7 Channels 8 Plate chain 18
More informationDesign Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
More informationAVOLA KREISSÄGEN. Revolving Cross Cut Saw GAMA 65 K. Technical Equipment. Options
AVOLA Revoving Cross Cut Saw GAMA 65 K Technica Equipment Motor rating 8,1 kw/400 Vac-50 Hz, star / deta start sawbade mounted direct on motor shaft Motor speed 3.000 rpm / sawbade speed 3.000 rpm Sawbade
More informationClamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:
Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content Q2 updates - Chains page 4 Q2 updates - Straight Running Belts page 5 Q2 updates
More informationKeeping machines well lubricated Speciality lubricants for the beverage industry. Lubrication is our world
Keeping machines well lubricated Speciality lubricants for the beverage industry Lubrication is our world The company Industrial sector Special knowledge Detailed information NSF H1 lubricants across the
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationRoller chains H-Series American type. High Performance from Rexnord. The right chain!
High Performance from Rexnord Roller chains H-Series American type Highly robust & durable through reinforced plates H-Series - American type High Performance from Rexnord. Inner Reinforced, fatigue resistant
More informationDIN /DIN Aseptic Flange Union for DIN 11866/11850 Tube
/ Aseptic Flange Union for DIN 11866/11850 Tube / Aseptic Flange Union This range of aseptic fittings has been developed by the German hygienic industry to meet the exacting needs of the food, chemical
More informationConveyor chains M and MT with solid pin. Approved Performance from Rexnord. The right chain!
roved Performance from Rexnord Conveyor chains M and MT with solid in Conveyor chains M and MT with solid in roved Performance from Rexnord. Fulfils ISO quality requirements Inner link St 52-2 Roller Carbon
More information300mm Conveyor System
300mm Conveyor System FlexMove Product Catalogue 281 SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum product width
More informationStandard Metric Roller Chain (DIN 8180/8187 and BS 228)
Standard Metric Roller (DIN 10/17 and BS 22) Single Roller Size ISO itch p Between Inner lates b 1 2. 2.0.00. 2. 4. 6. 6. 9. 11.6 19.56 0.99.99. 4 Roller d 1. 4.00 5.00 6..51 7.77.16.07 15. 0 27.94 29.21
More informationSTEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
More informationChain Guides for Roller Chains as per DIN 8187
Chain Guides for Roller Chains as per DIN 8187 Type T DIN 8187 chain no. Chain dimensions in inches B H b h Article no. 06B-1 3/8 x 7/32 15 10 5,4 1,5 221 010 002 083-1 1/2 x 3/16 15 10 4,5 1,5 221 010
More informationConveyor System ML2 ML2-1 MS2 MM3 ML2 MX2 DS2 DM3 DL2 DX2
Conveyor System Description 140mm width thermoplastic chain with aluminium frame conveyor system. Also available with stainless steel frame, please refer section. Examples of application industries Personal
More informationGeneral Catalogue. Products line 2017/C.2_ENG
General Catalogue Products line 2017/C.2_ENG Edition 2017/C.1_ENG March 28th 2017 All the technical data are updated to the date of publication. All texts, charts and illustrations of this document are
More informationsiegling transilon conveyor and processing belts FullSeal and INCREASED HYGIENE Siegling total belting solutions
siegling transilon conveyor and processing belts FullSeal Lower cleaning costs and INCREASED HYGIENE Siegling total belting solutions Fullseal Lower cleaning costs and INCREASED HYGIENE Fullseal is a product
More informationInnovation. Simplicity. is Simply Better. Rotary Lobe Pumps
Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured
More informationGEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM
GEA PUMPS Dispacement from 10 to 36 ccm Pressure up to 300 bar GHD0 Speed from 350 to 3400 PM Gear Pump Cataogue GHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................
More informationGStype/HGStype/WGStype
Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
More informationThe giant amongst the giants.
BB9090 PLUS 02 BB9090 PLUS The giant amongst the giants. The argest mode of the New Hoand big baer range is the BB9090 PLUS. Its superior performance both in terms of perfect, firm, we-shaped baes as we
More informationCV-Series. Single Curve Conveyors
CV-Series Single Curve Conveyors J O I N T H E Q U I E T R E V O L U T I O N I N C O N V E Y O R T E C H N O L O G Y V-Series Engineered to have the tightest turning radius in the industry. Built for nearly
More informationMatTop Chains. Overview Rexnord MatTop Chains. Solid Top Chains Hybrid. Perforated Top Chains 6391T. RubberTop Chains
MatTop Chains Solid Top Chains 1000 1005 1010 2000 2015 3125 5935 6300 6995 6995 Hybrid 7700 8505 Perforated Top Chains 500 1000 2000 2016 5936 6391T 7706 8506 Overview Rexnord MatTop Chains RubberTop
More informationSPROCKETS AND PLATEWHEELS DESIGNED FOR ROLLER CHAINS
AND DEIGNED FOR ROLLER The range of sprockets and wheels designed for chains manufactured by our Company provides an all-round solution to the needs of industry in the sector of flexible mechanical transmissions
More informationIndex. Purchase guide. Belt conveyor. Elevator Belt conveyor. Modular belt conveyor. Stainless steel belt & slat chain conveyor. Accessories & options
belts SOMEFI is a company dedicated to the manufacture and sale of conveyors and modular handling equipment. For more than 40 years SOMEFI has offered a complete range of industrial conveyors, of flexible
More informationAN SI Standard Roller Chains
RO LLER CH AIN S AN SI Standard Roller Chains SY's precision power transmission roller chains meet or exceed AN SI standard B29.1. Supplied in single and multiple strands of AN SI sizes from 3/8" to 3"
More information--... Need a prototype tomorrow? Experts in customization, innovative design and engineering
. Hay!J.~!!., kerk " Experts in customization, innovative design and engineering Haydon Kerk Motion Soutions has the e
More informationOpen-link chains. functioning without lubrication. normal open-link chain. caterpillar-type drive chain (similar to track chains)
CHAINS Open-link chains functioning without lubrication normal open-link chain stud-link or anchor chain caterpillar-type drive chain (similar to track chains) Link chains Load chains liner chain Fly-frame
More information(Nominal) Belt weight (Belt/pin material)
Datasheet: uni MP RO EN Plastic Modular elt Series uni MP RO P N N L T Straight running belt Nominal pitch: 50.8 mm (2.00 in) Surface type: Roller Top Surface opening: 22% ackflex radius: 65.0 mm (2.6
More information150mm Conveyor System
150mm Conveyor System FlexMove Product Catalogue 231 Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM.
More informationInteract Overhead Power
Interact Overhead Power 75 range introduction feature benefits Interact Overhead Power System is a powertrack catering for singe, 3 phase or dua circuit appications suitabe for standard, permanent ive,
More information7 Selections and dimensions - Overview
Error! Bookmark not defin ed. Selections and dimensions - Overview Possible combinations table Selections and dimensions - Overview.1 Possible combinations table These tables show the possible physical
More informationOmni-Pro 075. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and
More informationMore than food safety.
your global specialist Detailed information More than food safety. Speciality lubricants for the beverage industry Combine food safety and production reliability 3 Filling, capping, seaming and labelling
More informationStainless Steel Cylinders, ISO 6432, Bore 10-25mm - P1S
This range of stainless steel cylinders has been specially designed for use in difficult environments. Hygienic design, external seals of flourianted rubber and prelubrication with our food-industry-approved
More informationsiegling prolink modular belts Siegling total belting solutions
siegling prolink modular belts Product range Siegling total belting solutions Traditional conveyor belts are often intended for generic use, but the design features of Siegling Prolink modular belts are
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International
More information2 Important Information, Tables and Dimension Sheets
Permitted combinations Important Information, Tables and Dimension Sheets.1 Permitted combinations Structure of tables These tables show combinations of gear units and AC (brake) motors that are geometrically
More informationAmerican Standard (ANSI) Roller Chain
American Standard () Roller (All dimensions in inches) Single Roller ISO itch p Between lates Roller Connector links are wider than chain sections. Overall dimensions may vary depending on manufacturer.
More information