MINNESOTA PRICING SCHEDULE (Typed responses required)

Transcription

1 MINNESOTA PRICING SCHEDULE (Typed responses required) Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Trueman Welters Jon Ferris 1600 hwy 55 east Buffalo Mn SPEC # REQUESTED INFORMATION ANSWER 1.0 TRACTOR CATALOG SECTION PRICE PRICE LIST TITLE: Case Farmall Compact DATE AND ID# OF PRICE LIST: 15-Aug PERCENTAGE DISCOUNT TO BE APPLIED TO PRICE LIST: 28% 1.1 Price for manuals, (service, parts, repair, and operations) $1, Price for set of fluid and air filters $ PERFORMANCE/EXTENDED WARRANTY OPTIONS Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc. (Specify years, miles or hours extended term covers.) 2.1 $ 2.2 $ 3.0 INSTALLATION - PER HOUR $96.00 Installation services may be requested on an "as needed" basis. See Special Terms and Conditions 4.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: $ If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: 5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 6.0 PERCENTAGE DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES See Special Terms and Conditions 7.0 DELIVERY STARTING POINT - City, State, Zip Buffalo,mn See Special Terms and Conditions - No flat rate allowed $ /2015

2 AGRICULTURALEQUIPMENT U.S.PriceList EffectiveAugust10,2015 FARMALL SERIESCOMPACTTRACTORS PL100CAREVISION23 SAPPRICELIST027C1 THISISACOMPLETEREVISION Copyright2015By CNHIndustrialAmericaLLC

3

4 GENERAL INFORMATION ADVANCE FREIGHT Advance freight will be added to the machinery invoice as a separate net charge for machinery shipped from field locations or from other than specified Ex Works locations. PRICES Prices are Ex Works factory, where the goods are manufactured, except where noted. For detailed information concerning prices, please refer to your OPERATING GUIDE. CONTENTS OF ORGANIZATION CNH Industrial N.V. issues price lists and revisions covering each Case IH contract. The U.S. Price List is published in U.S. funds and the Canadian Price List is published in Canadian funds. Ensure that you are using the correct price list. U.S. or Canada is referenced at the top of each page and the Canadian price lists have a Maple Leaf on the price list cover page. Freight, duty and sales taxes are NOT included in any wholegoods or attachment prices shown in the price list. Any appropriate freight, duty, Federal, State, and Provincial taxes will be added to the machinery invoice as separate net charges. PROCEDURE The price pages for each machine (or group of machines) lists both "Factory Supplied Options" and "Factory Supplied Accessories." Each price list is comprised of the various machines sold under that contract. Each price book section has "Factory Supplied Options" and "Factory Supplied Accessories" price pages. When ordering and pricing a machine, follow the ordering instructions listed for that machine. Accessories listed following the "Factory Supplied Accessories" heading are available for installation in the field. DISTRIBUTION OF PRICE LISTS Price lists and periodic price list revisions will be posted on the Dealer Portal and distributed electronically when possible. Printed copies of current price lists, index tabs and binders can be purchased from the Document Management Center (DMC). Orders should be placed only through the DMC web site link located on the Dealer Portal. For DMC customer service inquiries, other than placing orders, call (262) Internal #NA DMC ORDER CENTER Complete U.S. Price List is PL-100 Complete Canadian Price List is PLC-100 Periodic price list revisions are usually accompanied by a cover sheet which carries instructions on price page changes and where to insert replacement or new price pages. The revisions are dated and are effective as of that date. \

5

6 FARMALL SERIES COMPACT TRACTORS TABLE OF CONTENTS COMPACT TRACTORS COMPACT FARMALL A SERIES TRACTORS Standard Features... 1 Price List... 3 FARMALL 30C and 35C TRACTORS TIER 4B Standard Features... 7 Price List... 9 Factory Supplied Attachments FARMALL 40C and 50C TRACTORS TIER 4B Standard Features Price List Factory Supplied Attachments FARMALL 45C/55C CVT TRACTORS- T4 Standard Features Price List Factory Supplied Attachments LOADERS FOR FARMALL COMPACT TRACTORS L340A LOADERS FOR COMPACT FARMALL A T4 Standard Features Price List Factory Supplied Attachments L350A LOADERS FOR COMPACT FARMALL 30C and 35C TIER 4 Standard Features Price List Factory Supplied Attachments L360A LOADERS FOR COMPACT FARMALL 40C and 50C TIER 4 Standard Features Price List Factory Supplied Attachments L350A LOADER FARMALL B CVT AND C CVT Standard Features Price List Factory Supplied Attachments... 37

7 FARMALL SERIES COMPACT TRACTORS TABLE OF CONTENTS COMPACT TRACTORS IMPLEMENTS AND ATTACHMENTS MW SERIES MOWERS FOR FARMALL A AND FARMALL C Standard Features Price List MW SERIES MOWERS FOR FARMALL B/C CVT Standard Features Price List Factory Supplied Attachments MW SERIES MOWERS FOR FARMALL B Standard Features Price List RR SERIES REAR MOUNT FINISHING MOWERS Standard Features Price List BR SERIES FRONT MOUNT ROTARY BROOMS Standard Features Price List Factory Supplied Attachments TL SERIES ROTARY TILLERS Standard Features Price List BM SERIES FRONT MOUNTED BLADES - BM1 Standard Features Price List Factory Supplied Attachments BS SERIES FRONT MOUNT SNOW BLOWERS Standard Features Price List Factory Supplied Attachments BS SERIES REAR MOUNT SNOW BLOWERS Standard Features Price List Factory Supplied Attachments... 69

8 FARMALL SERIES COMPACT TRACTORS TABLE OF CONTENTS COMPACT TRACTORS IMPLEMENTS AND ATTACHMENTS BHA SERIES BACKHOES Standard Features Price List Factory Supplied Attachments RC ROTARY CUTTERS Standard Features Price List Factory Supplied Attachments WORK EZ DISK HARROW Standard Features Price List WORK EZ RAKES Standard Features Price List WORK EZ BOX BLADES Standard Features Price List WORK EZ REAR BLADES Standard Features Price List WORK EZ EZ MATCH Standard Features Price List WORK EZ BALE CARRIERS Standard Features Price List WORK EZ HAY SPEARS Standard Features Price List... 98

9 FARMALL SERIES COMPACT TRACTORS TABLE OF CONTENTS CHARTS PARTS DIVISION SUPPLIED ACCESSORIES - FARMALL B SERIES TRACTORS PARTS DIVISION SUPPLIED ACCESSORIES - FARMALL B CVT SERIES TRACTORS PARTS DIVISION SUPPLIED ACCESSORIES - COMPACT TRACTORS PARTS DIVISION SUPPLIED ACCESSORIES - COMPACT LOADERS PARTS DIVISION SUPPLIED ACCESSORIES - COMPACT TRACTOR IMPLEMENTS REFERRAL ATTACHMENTS CASE IH PURCHASED PROTECTION

10 -T0CT 01 COMPACT FARMALL A SERIES TRACTOR (Ex Works Port of Entry) Standard Equipment DIESEL ENGINE: TRANSMISSION OPTIONS Farmall 30A Tier 4B: 12 x 12 Synchronized Shuttle Shift ISM 3 Cyl. Turbo Diesel Engine (SSS) 32.2 Gross Engine 2600 rpm Left-hand, dash mounted, 27.4 PTO 2600 rpm (Gear) synchronized shuttle 25.7 PTO 2600 rpm (Hydro) (4) Non-synchronized gears 92 cu. in.(1.5l) Displacement (3) Non-synchronized ranges Farmall 35A Tier 4B: 3-Range Hydrostatic with Cruise Control ISM 3 Cyl. Turbo Diesel Engine and Dual-Pedal direction control for 36.2 Gross Engine 2600 rpm forward and reverse 30.8 PTO 2600 rpm (Gear) 29.0 PTO 2600 rpm (Hydro) HYDRAULIC SYSTEM: 92 cu. in. (1.5L) Displacement Open Center Hydraulic System Dual Gear-type Pumps ALL MODELS: Implement Pump Capacity: 3 Cylinders - Farmall 30A = 8.2 gpm (31.2 L/min) Tier 4b compliant - Farmall 35A = 8.2 gpm (31.2 L/min) Turbo charged Steering Pump Capacity: Under Hood Muffler / Exhaust - Gear models = 4.2 gpm (15.9 L/min) Two-stage Dual Element Air Cleaner - HST models = 5.3 gpm (19.9 L/min) Full-flow, Spin-on Oil Filter Mid-mount Hydraulic Valve & Joystick 7.4 gallon (28L) Fuel Tank (STD) Fuel Filter with water separator Quick Glow Plug Starting Aid 3-POINT LIFT SYSTEM: Flip-up Hood w/ Gas Strut Lift ball ends: 1808 lb. (820 kg) INSTRUMENT PANEL: Category I, 3-point Linkage Analog Tachometer Position Control Lever Fuel Gauge Drop Rate Control Knob Coolant Temperature Gauge Crank-type Leveling Mechanism Hour Meter Telescoping Stabilizers Engine Oil Pressure Warning Light Fixed Link Ends Battery Charge Warning Light Cold Starting Aid Indicator Light ROPS: PTO ON Indicator Light 2-Post, Foldable Roll Bar Parking Brake Indicator Light Seat Belt Turn Indicator Lights Hazard Flasher Indicator Lights ELECTRICAL High Beam Headlights Indicator 12-volt, 80Ah, 660 CCA Battery Emmision Activation Indicator Safety Start Switch Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System 1 of 114 -T0CT AUG-15

11 -T0CT 01 COMPACT FARMALL A SERIES TRACTOR (Ex Works Port of Entry) Standard Equipment LIGHTING: FRONT AXLE: (2) Incondescent Corner Work Lights Mechanical Front Drive (MFD) (2) Halogen Headlights Fixed Position Rims (2) Taillights / Brakelights 47.1 in. (1197 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 tires only - Independent 540 rpm Fixed Position Rims - R3, R4 tires - Electro-hydraulic engagement 52.5 in. (1333 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap OPERATOR'S AREA: DRAWBAR: Contoured Cushion Seat Swinging - Fore / Aft / Height / Weight 3-Position Extendable Compensating Foot Throttle REAR DIFFERENTIAL LOCK Left Side Step Foot actuated mechanical Left Side Grab Handle Right Side Cupholder & Tray STEERING: Hydrostatic Power Steering SLOW MOVING VEHICLE EMBLEM Tilt Steering Column BRAKES: Wet Disc Dual Brake Pedals Foot-assist Parking Brake Lever 2 of 114 -T0CT AUG-15

12 -T0CT 01 COMPACT FARMALL A SERIES TRACTOR (Ex Works Port of Entry) Models COMMERCIAL MODEL ENGINE POWER Weight Factory Data List Price FARMALL 30A 30 HP 3,530 LB P69 $21, FARMALL 35A 35 HP 3,530 LB P43 $22, Factory Supplied Options Order Code Description Weight Factory Data List Price TRANSMISSION SD_T2810 TRANSMISSION x 12 Synchro-shuttle No Charge Hydrostatic Transmission P27 $1, HYDRAULICS SD_T8270 REAR REMOTES XT8270X Base Equipment -See Std Featrs No Charge Remote SDA P98 $ FRONT WHEELS AND TIRES SD_T4940 FRONT WHEELS AND TIRES x PR R4 Must be ordered with 43 x R4 ( ) Rear Tires x 14 6PR R1 Ag Bar Must be ordered with 11.2 x 24 4PR R1 Ag Bar ( ) Rear Tires x PR R3 T Must be ordered with 41 x PR R3 ( ) Rear Tires. No Charge (900085P47) ($111.00) (900085P47) ($111.00) REAR WHEELS AND TIRES SD_T4950 REAR WHEELS AND TIRES x R4 No Charge x 24 4PR R1 Ag Bar (900234P08) ($304.00) x PR R P84 $ of 114 -T0CT AUG-15

13 -T0CT 01 COMPACT FARMALL A SERIES TRACTOR (Ex Works Port of Entry) OPERATOR MANUALS SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge French Canadian No Charge 4 of 114 -T0CT AUG-15

14 -T0CT 01 COMPACT FARMALL A SERIES TRACTOR (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Front Wheels and Tires X14 6PR R1 CIH LSM 95 LB P82 $ X PR R3 TURF CIH LSM 98 LB P82 $ X PR R4 CIH LSM 107 LB P29 $ Rear Wheels and Tires X24 4PR R1 CIH LSM 343 LB P95 $ X PLY TL R4 CIH 418 LB P03 $1, X PR R3 TURF CIH LS 347 LB P87 $1, of 114 -T0CT AUG-15

15 6 of 114

16 -T0CP 01 FARMALL 30C/35C TRACTORS - TIER 4B (Ex Works Port of Entry) Standard Equipment DIESEL ENGINE: TRANSMISSION OPTIONS Farmall 30C Tier 4B: 12 x 12 Synchronized Shuttle Shift ISM 3 Cyl. Turbo Diesel Engine (SSS) 32.2 Gross Engine 2600 rpm Left-hand, dash mounted, 26.0 PTO 2600 rpm (Gear) synchronized shuttle 24.7 PTO 2600 rpm (Hydro) (4) Synchronized gears 92 cu. in.(1.5l) Displacement (3) Non-synchronized ranges Farmall 35C Tier 4B: 3-Range Hydrostatic with Cruise Control ISM 3 Cyl. Turbo Diesel Engine and Dual-Pedal direction control for 36.2 Gross Engine 2600 rpm forward and reverse 29.6 PTO 2600 rpm (Gear) 28.1 PTO 2600 rpm (Hydro) HYDRAULIC SYSTEM: 92 cu. in. (1.5L) Displacement Open Center Hydraulic System Dual Gear-type Pumps ALL MODELS: Implement Pump Capacity: 3 Cylinders - Farmall 30C = 8.2 gpm (31.2 L/min) Tier 4b compliant - Farmall 35C = 8.2 gpm (31.2 L/min) Turbo charged Steering Pump Capacity: Under Hood Muffler / Exhaust - Gear models = 4.2 gpm (15.9 L/min) Two-stage Dual Element Air Cleaner - HST models = 5.3 gpm (19.9 L/min) Full-flow, Spin-on Oil Filter Mid-mount Hydraulic Valve & Joystick 10.5 gallon (40L) Fuel Tank (STD) Fuel Filter with water separator Quick Glow Plug Starting Aid 3-POINT LIFT SYSTEM: Flip-up Hood w/ Gas Strut Lift ball ends: 1808 lb. (820 kg) INSTRUMENT PANEL: Category I, 3-point Linkage Analog Tachometer Position Control Lever Fuel Gauge Drop Rate Control Knob Coolant Temperature Gauge Crank-type Leveling Mechanism Hour Meter Telescoping Stabilizers Engine Oil Pressure Warning Light Flexible Link Ends Battery Charge Warning Light Cold Starting Aid Indicator Light ROPS: PTO ON Indicator Light 2-Post, Foldable Roll Bar Parking Brake Indicator Light Seat Belt Turn Indicator Lights Hazard Flasher Indicator Lights ELECTRICAL High Beam Headlights Indicator 12-volt, 80Ah, 660 CCA Battery Emmision Activation Indicator Safety Start Switch Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System 7 of 114 -T0CP AUG-15

17 -T0CP 01 FARMALL 30C/35C TRACTORS - TIER 4B (Ex Works Port of Entry) Standard Equipment LIGHTING: FRONT AXLE: (2) Halogen Corner Work Lights Four Wheel Drive (FWD) (2) Halogen Headlights Fixed Position Rims (2) Taillights / Brakelights 45.6 in. (1159 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 tires only - Independent 540 rpm Fixed Position Rims - R3, R4 tires - Electro-hydraulic engagement 46.5 in. (1283 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap OPERATOR'S AREA: DRAWBAR: Contoured Cushion Seat Swinging - Fore / Aft / Height / Weight 2-Position Extendable Compensating - Spring Suspension REAR DIFFERENTIAL LOCK Deluxe Floor Mat Foot Throttle STEERING: Left Side Step Hydrostatic Power Steering Left Side Grab Handle Tilt Steering Column Right Side Cupholder & Tray BRAKES: SLOW MOVING VEHICLE EMBLEM Wet Disc Dual Brake Pedals Foot-assist Parking Brake Lever 8 of 114 -T0CP AUG-15

18 -T0CP 01 FARMALL 30C/35C TRACTORS - TIER 4B (Ex Works Port of Entry) Models COMMERCIAL MODEL VERSION Weight Factory Data List Price FARMALL 30C Rops 4,500 LB P99 $23, FARMALL 35C Rops 4,500 LB P62 $25, FARMALL 35C Cab 4,500 LB P80 $31, Factory Supplied Options Order Code Description Weight Factory Data List Price TRANSMISSION TRANSMISSION SD_T2810 TRANSMISSION x 12 Synchro-shuttle No Charge Hydrostatic Transmission P07 $1, HYDRAULICS SD_T8270 REAR REMOTES XT8270X Base Equipment -See Std Featrs No Charge Less Rear Remote Remote SDA Not Available on Cab Models P98 $ Remote Valves P90 $1, FRONT WHEELS AND TIRES SD_T4940 FRONT WHEELS AND TIRES x PR R4 Must be ordered with 43 x R4 Rear Tires ( ) x 14 6PR R1 Ag Bar Must be ordered with 11.2 x 24 4PR R1 Ag Bar Rear Tires ( ) x PR R3 T Must be ordered with 41 x PR R3 Rear Tires ( ). No Charge (900085P47) ($111.00) (900085P47) ($111.00) 9 of 114 -T0CP AUG-15

19 -T0CP 01 FARMALL 30C/35C TRACTORS - TIER 4B (Ex Works Port of Entry) REAR WHEELS AND TIRES SD_T4950 REAR WHEELS AND TIRES x R4 No Charge x 24 4PR R1 Ag Bar (900234P08) ($304.00) x PR R P84 $ OPERATOR MANUALS SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge French Canadian - Gear No Charge 10 of 114 -T0CP AUG-15

20 -T0CP 01 FARMALL 30C/35C TRACTORS - TIER 4B (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Front Wheels and Tires X PR R3 TURF CI 98 LB P82 $ X14 6PR R1 CIH LSM 95 LB P82 $ x PR CIH LSM 109 LB P29 $ Rear Wheels and Tires X24 4PR R1 CIH LSM 343 LB P95 $ X PLY TL R4 CIH 420 LB P03 $1, X PR R3 TURF CIH LS 344 LB P87 $1, of 114 -T0CP AUG-15

21 12 of 114

22 -T0CP 02 FARMALL 40C/50C TRACTORS - TIER 4B (Ex Works Port of Entry) Standard Equipment DIESEL ENGINE: TRANSMISSION OPTIONS: Farmall 40C Tier 4B: 16 x 16 Synchronized Shuttle Shift ISM 4 Cyl. Diesel Engine (SSS) 40.7 Gross Engine 2600 rpm Left-hand, dash mounted, 32.4 PTO 2600 rpm (Gear) synchronized shuttle 30.8 PTO 2600 rpm (Hydro) (4) Synchronized gears 135 cu. in. (2.22L) Displacement (4) Non-synchronized ranges Farmall 50C Tier 4B: 3- Range Hydrostatic with Cruise Control ISM 4 Cyl. Diesel Engine and Dual Pedal direction control for 45.6 Gross Engine 2600 rpm forward and reverse 37.3 PTO 2600 rpm (Gear) 35.4 PTO 2600 rpm (Hydro) HYDRAULIC SYSTEM: 135 cu. in. (2.22L) Displacement Open Center Hydraulic System Dual Gear-type Pumps ALL MODELS: Implement Pump Capacity: 4 Cylinders gpm (31.2 L/min) Naturally Aspirated Steering Pump Capacity: Under Hood Muffler / Exhaust - Gear models = 4.2 gpm (15.9 L/min) Two-stage Dual Element Air Cleaner - HST models = 5.3 gpm (19.9 L/min) Full-flow, Spin-on Oil Filter Mid-mount Hydraulic Valve & Joystick 10.5 gallon (40L) Fuel Tank (STD) Fuel Filter with water separator Quick Glow Plug Starting Aid 3-POINT LIFT SYSTEM: Flip-up Hood w/ Gas Strut Lift ballk ends: 2756 lb. (1250 kg) INSTRUMENT PANEL: Category I, 3-point Linkage Analog Tachometer Position Control Lever Fuel Gauge Drop Rate Control Knob Coolant Temperature Gauge Crank-type Leveling Mechanism Hour Meter Telescoping Stabilizers Engine Oil Pressure Warning Light Flexible Link Ends Battery Charge Warning Light Cold Starting Aid Indicator Light ROPS: PTO ON Indicator Light 2-Post, Foldable Roll Bar Parking Brake Indicator Light Seat Belt Turn Indicator Lights Hazard Flasher Indicator Lights ELECTRICAL: High Beam Headlight Indicator 12-volt, 80Ah, 660 CCA Battery Emmisions Indicator Safety Start Switch Key Start/Fuel Shutoff 85 amp Alternator Operator Presence System 13 of 114 -T0CP AUG-15

23 -T0CP 02 FARMALL 40C/50C TRACTORS - TIER 4B (Ex Works Port of Entry) Standard Equipment LIGHTING: FRONT AXLE: (2) Halogen Corner Work Lights Four Wheel Drive (FWD) (2) Halogen Headlights Fixed position rims (2) Taillights / Brakelights 51.7 in. (1314 mm) Tread Setting with (2) Flashing Warning Lights / Turn R4 tires Signals REAR AXLE: PTO: Flange Type Axle Rear PTO Reversible Position Rims - R1 only - Independent 540 rpm Fixed Position Rims - R3, R4 - Electro-hydraulic engagement 47.7 in. (1211 mm) Tread Setting with - Flip-up Shield R4 tires - Shaft Cap OPERATOR'S AREA: DRAWBAR: Contoured Cushion Seat Swinging - Fore / Aft / Height / Weight 2-Position Extendable Compensating - Spring Suspension REAR DIFFERENTIAL LOCK Deluxe Floor Mat Foot Throttle STEERING: Left Side Step Hydrostatic Power Steering Left Side Grab Handle Tilt Steering Column Right Side Cupholder & Tray BRAKES: SLOW MOVING VEHICLE EMBLEM Wet Disc Dual Brake Pedals Foot-assist Parking Brake Lever 14 of 114 -T0CP AUG-15

24 -T0CP 02 FARMALL 40C/50C TRACTORS - TIER 4B (Ex Works Port of Entry) Models COMMERCIAL MODEL VERSION Weight Factory Data List Price FARMALL 40C Rops 5,500 LB P12 $28, FARMALL 40C Cab 5,500 LB P30 $34, FARMALL 50C Rops 5,500 LB P43 $31, FARMALL 50C Cab 5,500 LB P00 $37, Factory Supplied Options Order Code Description Weight Factory Data List Price TRANSMISSION TRANSMISSION SD_T2810 TRANSMISSION x16 Synchro Shuttle No Charge HST + 3 Range P07 $1, HYDRAULICS SD_T8270 REAR REMOTES XT8270X Base Equipment -See Std Featrs No Charge Less Rear Remote Remote SDA P98 $ Not Available on Cab Models Remote DA Not Available on Cab Models P98 $ Remote Valves P90 $1, FRONT WHEELS AND TIRES SD_T4940 FRONT WHEELS AND TIRES x PR R4 Must be ordered with 17.5Lx24 6PR R4 Rear Tires ( ) x 16 4PR R1 Must be ordered with PR R1 Rear Tires ( ) x PR R3 Must be ordered with 41 x PR R3 Rear Tires ( ) P83 $ P27 $ P27 $ of 114 -T0CP AUG-15

25 -T0CP 02 FARMALL 40C/50C TRACTORS - TIER 4B (Ex Works Port of Entry) REAR WHEELS AND TIRES SD_T4950 REAR WHEELS AND TIRES Lx24 6PR R P24 $ PR R1 (900130P13) ($169.00) x PR R P84 $ OPERATOR MANUALS SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge French Canadian - Gear No Charge 16 of 114 -T0CP AUG-15

26 -T0CP 02 FARMALL 40C/50C TRACTORS - TIER 4B (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Front Wheels and Tires PR R1 CIH LSM 171 LB P56 $ X PR TL TURF (R3) 4W 48 LB P56 $ X PR R4 LSM CIH 177 LB P12 $ Rear Wheels and Tires X24 4PR R1 CIH LSM 298 LB P90 $1, X PR R3 TURF CIH LS 344 LB P87 $1, LX24 6PR R4 CIH 581 LB P27 $1, of 114 -T0CP AUG-15

27 18 of 114

28 -T0CN 01 FARMALL 45C/55C CVT TRACTORS - T4 (Ex Works - See Standard Equipment) Standard Equipment MODELS: TRANSMISSION: (continued) Farmall 45C CVT Single pedal for speed control 45.1 Gross Engine 2600 rpm Electronic Adjustable Speed & Response 46.0 Gross Engine rpm settings 32.7 PTO 2600 rpm HYDRAULICS: Farmall 55C CVT Open Center Hydraulic System 53.0 Gross Engine 2600 rpm Dual Gear-type Pumps 54.0 Gross Engine rpm Implement Pump Capacity: 41.2 PTO 2600 rpm CAB 9.7 gpm (36.9 L/min) 40.4 PTO 2600 rpm CAB Steering Pump Capacity: 5.1 gpm (21.0 L/min) ENGINE: Mid-mount Hydraulic Ports FPT Engine Model R7531E cu. in. (2.2L) Displacement HITCH: 3 Cylinders Lift 24 in. behind link ends: Tier 4b Compliant 2800 lb. (1270 kg) Turbo-charged Category I, 3-point Linkage Under Hood Exhaust Position Control Lever Two-stage Dual Element Air Cleaner Drop Rate Control Knob Full-flow, Spin-on Oil Filter Crank-type Leveling Mechanism 13 gallon (49.2 L) Fuel Tank Telescoping Stabilizers Fuel Filter with water separator Flexible Link Ends Quick Glow Plug Starting Aid Flip-Up Hood ELECTRICAL: MMV Standard 12-volt, 850 CCA Battery Safety Start Switch INSTRUMENT PANEL: Key Start/Fuel Shutoff Analog Tachometer Alternator Fuel Gauge 75 amp - ROPS models Coolant Temperature Gauge 90 amp - CAB models Hour Meter Operator Presence System Engine Oil Pressure Warning Light 12-volt DC (10 amp) Auxiliary Power Battery Charge Warning Light outlet Status Indicator Lights Digital display panel LIGHTING: Cab / ROPS TRANSMISSION: (2) Halogen Corner Work Lights EasyDrive Continuously Variable (2) Halogen Headlights (high/low beam) Transmission (CVT) Series II (2) Taillights Cruise Control (2) Flashers / Turn Signals Steering Column mounted shuttle lever Cab Only for FWD/REV directional control (2) Front-mounted Cab Work Lights (2) Rear-mounted Cab Work Lights 19 of 114 -T0CN AUG-15

29 -T0CN 01 FARMALL 45C/55C CVT TRACTORS - T4 (Ex Works - See Standard Equipment) Standard Equipment PTO: ROPS PLATFORM: Rear Deluxe Viny Covered Seat Independent 540 rpm Full suspension with weight Flip-up Shield adjustability Shaft Cap Fore/Aft/ Swivel adjustment Mid PTO Floor Mat 2,000 RPM Cup Holder Left and Right Side Steps DRAWBAR: Toolbox Swinging Slow Moving Vehicle Emblem 2-Position Extendable CAB PLATFORM: REAR DIFFERENTIAL LOCK (2) Doors Rear Window Opens 35 degrees STEERING: High Visibility Panel in Roof above Hydrostatic Power Steering Windshield Tilt and Telescoping Steering Column Air Conditioning Heater BRAKES: 3-speed Fan Control for heat and A/C Wet Disc Single Cab Air Filter Parking Brake Lock Lever Radio-ready with (2) speakers, wiring Left Side Mounted Suspended Brake and antenna Pedals Deluxe Cloth Covered Seat Full suspension with weight FRONT AXLE: adjustability Four Wheel Drive (FWD) Fore/Aft/ Swivel adjustment Fixed Position Rims Floor Mat 52.5 in. (1334 mm) Tread Setting with Cloth Covered Headliner R4 tires Adjustable Sun Visor Interior Rearview Mirror FRONT TIRES: Left and Right External Mounted Mirrors PR R4 industrial bar tread Removable Plug in rear of cab to route harness REAR AXLE: Front Windshield Wiper and Washer Flange-type Axle Cup Holder Adjustable Position Rims - R1 Left and Right Side Steps Fixed Rims - R3, R4, Galaxy Toolbox 55.3 in. to 67.4 in. ( mm) Slow Moving Vehicle Emblem Tread Setting with R4 tires WARRANTY: REAR TIRES: Full Coverage - 24 months or LX24 6PR R4 tread hours Powertrain - 36 months or 2000 hours 20 of 114 -T0CN AUG-15

30 -T0CN 01 FARMALL 45C/55C CVT TRACTORS - T4 (Ex Works - See Standard Equipment) Models COMMERCIAL MODEL FARMALL 45C CVT T4 ROPS FARMALL 45C CVT T4 CAB FARMALL 55C CVT T4 ROPS FARMALL 55C CVT T4 CAB VERSION ENGINE POWER Weight Factory Data List Price Rops 45 HP 6,239 LB P61 $35, Cab 45 HP 6,239 LB P45 $44, Rops 53HP 6,239 LB P24 $38, Cab 53HP 6,239 LB P08 $47, Factory Supplied Options Order Code Description Weight Factory Data List Price OPERATOR STRUCTURE SD_05109 ARMREST X5109X No Armrest No Charge Armrests P06 $78.00 SD_T9162 RADIO/RADIO READY XT9162X Standard Less Radio No Charge AM/FM Stereo Radio AM/FM Radio with MP3 port Not Available on Rops Models P24 $ ENGINE STARTING AID SD_T9940 MKT PACK.FOR COLD C XT9940X Cold Start Thrmostar No Charge Mkt Pack F/Cold Cli Cold weather pkg includes - engine heater, transmission heater, fuel heater, rear windshield wiper & washer P92 $ of 114 -T0CN AUG-15

31 -T0CN 01 FARMALL 45C/55C CVT TRACTORS - T4 (Ex Works - See Standard Equipment) HYDRAULICS SD_T8270 REAR REMOTES XT8270X Base Equipment -See Std Featrs No Charge Remote DA 1 Rear remote: 1st position rear remote - float & detent valve P83 $ Aux.Hydr.:1 S/D 1 2 Rear remotes: 1st position rear remote - float & detent 2nd position rear remote - 3 position detent valve (no float) P66 $1, FRONT WHEELS AND TIRES SD_T4940 FRONT WHEELS AND TIRES PR R4 Ind. Bar Must be ordered with 17.5Lx24 6PR R4 ( ) Rear Tires x PR R3 Turf Must be ordered with 44 x PR R3 Turf ( ) Rear Tires PR R1(Ag Bar) Must be ordered with PR R1 Ag Bar ( ) Rear Tires /12LL x 15 6PR Galaxy Tires Must be ordered with 22.5LL x PR R3 Galaxy ( ) Rear Tires Galaxy tires are NOT compatible with Front-End Loader, Front Attachments or Mid Mount Mowers No Charge (900116P27) ($151.00) (900116P27) ($151.00) P76 $88.00 REAR WHEELS AND TIRES SD_T4950 REAR WHEELS AND TIRES Lx24 6PR R4 No Charge x PR R3 Turf (900314P93) ($409.00) PR R1 Ag Bar (900298P76) ($388.00) LL x PR R3 Galaxy Galaxy tires are NOT compatible with front-end loader, front attachments or mid mount mowers P36 $ OPERATOR'S MANUAL SD_T9800 OPERATORS MANUAL XT9800X North American English No Charge French Canadian No Charge 22 of 114 -T0CN AUG-15

32 -CP9J 01 L340A LOADER FOR FARMALL A T4 (Ex Works Port of Entry) Standard Equipment L340A SPECIFICATIONS L340A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L340A Loader includes the following: L340A (For Farmall 30A & 35A) Distances in (in/mm) unless Basic Loader for Farmall 30A & 35A otherwise noted. Forces in (lbs/kg) with Improved Visibility mounting unless otherwise noted. system (like L350A) Curved Boom, Mid-Mount, Quick Mounting Kit Attach Design Quick Coupler - Skid Steer Style Maximum Lift Height: 68" HD Material Bucket (Quick Attach) 98.4 / 2500 (Mid-mount valve & Joystick are Dump Clearance: included with tractor) 75.3 / 1913 Digging Depth: Loader specifications are subject to 8 / 203 change and may vary based on tractor Lift bucket pivot point: model and tire size / 567 Lift 19.7 in. (500mm) from bucket pivot point: 890 / 404 Breakout bucket pivot point: 2700 / 1225 Breakout 19.7 in. (500mm) from bucket pivot point: 1900 / 862 Maximum Lift: 31 / 787 Bucket Rollback: 32 Bucket Dump Angle: 39 Bucket Level Indicator Parking Stand NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for recommended counterweighting. 23 of 114 -CP9J AUG-15

33 -CP9J 01 L340A LOADER FOR FARMALL A T4 (Ex Works Port of Entry) Models COMMERCIAL MODEL L340A FARMALL A T4 PACKAGED KIT SPECIALTY Weight Factory Data List Price Quick Attach Less Valve IV 68 in. Bucket P70 $5, of 114 -CP9J AUG-15

34 -CP9J 01 L340A LOADER FOR FARMALL A T4 (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Other Equipment Ballast box 1000 Lb Max (Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required. 169 LB P56 $ LB P02 $ of 114 -CP9J AUG-15

35 26 of 114

36 -CP9J 02 L350A LOADER FOR FARMALL 30C AND 35C (Ex Works Port of Entry) Standard Equipment L350A SPECIFICATIONS L350A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L350A Loader includes the following: L350A (For Farmall 30C and 35C Tier 4) Distances in (in/mm) unless Basic Loader for Farmall 30C and otherwise noted. Forces in (lbs/kg) Farmall 35C Tier 4 with Improved unless otherwise noted Visibility mounting system. Curved Boom, Mid-Mount, Quick Mounting Kit Attach Design Quick Coupler - Skid Steer Style Maximum Lift Height: 68" HD Material Bucket (Quick Attach) 105 / 2667 (Mid-mount valve & Joystick are Dump Clearance: included with tractor) 81.5 / 2070 Digging Depth: Loader specifications are subject to 6.5 / 165 change and may vary based on tractor Lift Capacity model and tire bucket pivot point: 2000 / 19.7 in. (500mm) from bucket pivot point: 1540 / 699 Breakout bucket pivot point: 3540 / 19.7 in. (500mm) from bucket pivot point: 2640 / 1197 Maximum Lift: 33 / 838 Bucket Rollback: 30º Bucket Dump Angle: 58º 4-Bar Bucket Linkage Bucket Level Indicator, Parking Stand NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for 27 of 114 -CP9J AUG-15

37 -CP9J 02 L350A LOADER FOR FARMALL 30C AND 35C (Ex Works Port of Entry) Models COMMERCIAL MODEL PACKAGED KIT SPECIALTY Weight Factory Data List Price L350A 30C/35C Quick Attach Less Valve IV 68 in. Bucket 800 LB P91 $6, ROPS L350A 35C CAB Quick Attach Less Valve IV Cab 68 in. Bucket 800 LB P91 $6, of 114 -CP9J AUG-15

38 -CP9J 02 L350A LOADER FOR FARMALL 30C AND 35C (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Ballast box 1000 Lb Max 169 LB P56 $ (Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required. 243 LB P02 $ of 114 -CP9J AUG-15

39 30 of 114

40 -CP9J 03 L360A LOADER FOR FARMALL 40C AND 50C (Ex Works Port of Entry) Standard Equipment L360A SPECIFICATIONS L360A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L360A for Farmall 40C and 50C Tier 4 L360A (For Farmall 40C and 50C Tier4) Distances in (in/mm) unless Basic Loader for Farmall 40C and otherwise noted. Forces in (lbs/kg) Farmall 50C Tier 4 with Improved unless otherwise noted Visibility mounting system Curved Boom, Mid-Mount, Quick Mounting Kit Attach Design Quick Coupler - Skid Steer Style Maximum Lift Height: 72" HD Material Bucket (Quick Attach) / 2852 (Mid-mount valve & Joystick are Dump Clearance: included with tractor) 85.2 / 2164 Digging Depth: Loader specifications are subject to 4.9 / 125 change and may vary based on tractor Lift Capacity model and tire bucket pivot point: 2500 / 19.7 in. (500mm) from bucket pivot point: 1830 / 830 Breakout bucket pivot point: 5000 / 19.7 in. (500mm) from bucket pivot point: 3114 / 1412 Maximum Lift: 32 / 813 Bucket Rollback: 39º Bucket Dump Angle: 49º 4-Bar Bucket Linkage Bucket Level Indicator Parking Stand NOTE: COMPATIBILITY INFORMATION To assure proper performance, see Operator's manual for 31 of 114 -CP9J AUG-15

41 -CP9J 03 L360A LOADER FOR FARMALL 40C AND 50C (Ex Works Port of Entry) Models COMMERCIAL MODEL PACKAGED KIT SPECIALTY Weight Factory Data List Price L360A 40C/50C CAB Quick Attach Less Valve IV 72 in. Bucket 650 LB P33 $6, Cab L360A 40C/50C ROPS Quick Attach Less Valve IV 72 in. Bucket 800 LB P33 $6, of 114 -CP9J AUG-15

42 -CP9J 03 L360A LOADER FOR FARMALL 40C AND 50C (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Ballast box 1000 Lb Max 169 LB P56 $ (Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required. 243 LB P02 $ of 114 -CP9J AUG-15

43 34 of 114

44 -CP9J 04 L350A LOADER FARMALL B CVT AND C CVT (Ex Works Port of Entry) Standard Equipment L350A SPECIFICATIONS L350A SPECIFICATIONS (PER ASAE S301.5): (PER ASAE S301.5): L350A Loader includes the following: L350A (For Farmall 40B CVT, 45B CVT, 45C CVT, 50B CVT, and 55C CVT) Basic Loader for Distances in (in/mm) unless Farmall 40B CVT, 45B CVT, otherwise noted. Forces in (lbs/kg) 45C CVT, 50B CVT, and 55C CVT unless otherwise noted with Improved Visibility mounting Curved Boom, Mid-Mount, Quick system. Attach Design Tractors S/N ZDME21931 and after. Maximum Lift Height: Quick Coupler - Skid Steer Style 105 / " HD Material Bucket (Quick Attach) Dump Clearance: 81.5 / 2070 FARMALL B AND C CVT TRACTORS ARE Digging Depth: STANDARD LOADER READY 6.5 / 165 Lift Capacity Loader specifications are subject bucket pivot point: change and may vary based on tractor 2000 / 907 model and tire 19.7 in. (500mm) from bucket pivot point: 1540 / 699 Breakout bucket pivot point: 3540 / 19.7 in. (500mm) from bucket pivot point: 2640 / 1197 Maximum Lift: 33 / 838 Bucket Rollback: 30º Bucket Dump Angle: 58º 4-Bar Bucket Linkage Bucket Level Indicator, Parking Stand COMPATIBILITY INFORMATION: To assure proper performance, see Operator's manual for recommended counterweighting 35 of 114 -CP9J AUG-15

45 -CP9J 04 L350A LOADER FARMALL B CVT AND C CVT (Ex Works Port of Entry) Models COMMERCIAL MODEL L350A FARMALL B/C CVT PACKAGED KIT SPECIALTY Weight Factory Data List Price Quick Attach Less Valve IV 72 in. Bucket 650 LB P10 $5, of 114 -CP9J AUG-15

46 -CP9J 04 L350A LOADER FARMALL B CVT AND C CVT (Ex Works Port of Entry) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Ballast box 1000 Lb Max 169 LB P56 $ (Category I) with 1000 lbs. maximum capacity (For Class II or Class III tractors). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required Ballast box 1500 Lb Max (Category II) with 1500 lbs. maximum capacity (For Class III tractors ONLY). This item must be placed on a separate order. Items ordered under Other Equipment Section cannot also be ordered as a factory supplied accessory on the same order. A separate order is necessary if additional quantities are required. 243 LB P02 $ of 114 -CP9J AUG-15

47 38 of 114

48 -CP1Z 01 MW SERIES MOWERS FARMALL A AND FARMALL C (Ex Works Wholegoods Depot) Standard Equipment MW266S Side Discharge Mid-Mount MW272S Side Discharge Mid-Mount Rotary Mower Rotary Mower For use with Farmall 30C & 35C Tractors For use with Farmall 40C & 50C Tractors SPECIFICATIONS: SPECIFICATIONS: Cutting Width (in.) - 66 Cutting Width (in.) - 72 Cutting Height (in.) Cutting Height (in.) Overall width (in.) - discharge chute Overall width (in.) - discharge chute down 69 down 85 Number of Blades - 3 Number of Blades - 3 Blade Type - Standard Blade Type - Standard Blade Length/Width (in.) - 23 L x 2.5W Blade Length/Width (in.) - 25L x 2.5W Blade Tip Speed (in feet per minute) - Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Less than 18,000 (ANSI) Drive - Mid PTO Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides, Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle 10 gauge top, 1/4" spindle reinforcement pads reinforcement pads Tire Compatibility: Tire Compatibility: Agricultural (R1) - Yes, limited turn Agricultural (R1) - NO angle: Large Industrial (R4) - NO Right Hand - 24 degrees, Left Hand - 27 degrees Turf (R3) - Yes, limited turn angle: Industrial (R4) - Yes, limited turn angle: Right Hand - 34 degrees, Left Hand - Right Hand - 33 degrees, Left Hand - 35 degrees 37 degrees Galaxy Turf - NO Turf (R3) - Yes, limited turn angle: Right Hand - 33 degrees, Left Hand - Mulch Kit - AMENHM728 (Service Parts) 37 degrees Galaxy Turf - NO NOTE: REQIREMENTS FOR OPERATION Mulch Kit - AMENHM628 (Service Parts) A mid PTO kit is required to operate this mower. The PTO kit can only be NOTE: ordered through parts (MT ). REQUIREMENTS FOR OPERATION A mid PTO kit is required to operate this mower. The PTO kit can only be ordered through parts (MT ). 39 of 114 -CP1Z AUG-15

49 -CP1Z 01 MW SERIES MOWERS FARMALL A AND FARMALL C (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL Weight Factory Data List Price MW266S FARMALL A/C T4 443 LB P11 $3, MW272S FARMALL A/C T4 443 LB P04 $3, of 114 -CP1Z AUG-15

50 -CP1Z 02 MW172S Side Discharge Mid-Mount Rotary Mower For use with Farmall B 40 CVT, 45 CVT & 50 CVT Tractors SPECIFICATIONS: Cutting Width (in.) - 72 Cutting Height (in.) Overall width (in.) - discharge chute down 85 Number of Blades - 3 Blade Type - Standard Blade Length/Width (in.) - 25L x 2.5W Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle reinforcement pads Tire Compatibility: Agricultural (R1) - NO Large Industrial (R4) - NO Turf (R3) - Yes, limited turn angle: Right Hand - 34 degrees, Left Hand - 35 degrees Galaxy Turf - NO Mulch Kit - AMENHM728 (Service Parts) MW SERIES MOWERS FOR FARMALL B/C CVT (Ex Works Wholegoods Depot) Standard Equipment 41 of 114 -CP1Z AUG-15

51 -CP1Z 02 MW SERIES MOWERS FOR FARMALL B/C CVT (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL Weight Factory Data List Price MW172S FARMALL B/C CVT 620 LB P04 $3, Factory Supplied Options Order Code Description Weight Factory Data List Price OTHER EQUIPMENT SD_15012 BALE RAMP AND AXLE X15012X No Ramp No Charge Ramp Kit P85 $ of 114 -CP1Z AUG-15

52 -CP1Z 02 MW SERIES MOWERS FOR FARMALL B/C CVT (Ex Works Wholegoods Depot) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Ramp Kit CLS 2 40 LB P85 $ of 114 -CP1Z AUG-15

53 44 of 114

54 -CP1Z 03 MW SERIES MOWERS FOR FARMALL B (Ex Works Wholegoods Depot) Standard Equipment MW166S Side Discharge Mid-Mount MW172S Side Discharge Mid-Mount Rotary Mower Rotary Mower For use with Farmall 30B & 35B Tractors For use with Farmall 40B & 50B Tractors SPECIFICATIONS: SPECIFICATIONS: Cutting Width (in.) - 66 Cutting Width (in.) - 72 Cutting Height (in.) Cutting Height (in.) Overall width (in.) - discharge chute Overall width (in.) - discharge chute down 69 down 85 Number of Blades - 3 Number of Blades - 3 Blade Type - Standard Blade Type - Standard Blade Length/Width (in.) - 23 L x 2.5W Blade Length/Width (in.) - 25L x 2.5W Blade Tip Speed (in feet per minute) - Blade Tip Speed (in feet per minute) - Less than 18,000 (ANSI) Less than 18,000 (ANSI) Drive - Mid PTO Drive - Mid PTO Gauge Wheels (in.) - 2 x 6 (4) Gauge Wheels (in.) - 2 x 6 (4) Deck Spring suspension - Yes Deck Spring suspension - Yes Deck Shell Weldment - 10 gauge sides, Deck Shell Weldment - 10 gauge sides, 10 gauge top, 1/4" spindle 10 gauge top, 1/4" spindle reinforcement pads reinforcement pads Tire Compatibility: Tire Compatibility: Agricultural (R1) - Yes, limited turn Agricultural (R1) - NO angle: Large Industrial (R4) - NO Right Hand - 24 degrees, Left Hand - 27 degrees Turf (R3) - Yes, limited turn angle: Industrial (R4) - Yes, limited turn angle: Right Hand - 34 degrees, Left Hand - Right Hand - 33 degrees, Left Hand - 35 degrees 37 degrees Galaxy Turf - NO Turf (R3) - Yes, limited turn angle: Right Hand - 33 degrees, Left Hand - Mulch Kit - AMENHM728 (Service Parts) 37 degrees Galaxy Turf - NO NOTE: REQIREMENTS FOR OPERATION Mulch Kit - AMENHM628 (Service Parts) A mid PTO kit is required to operate this mower. The PTO kit can only be NOTE: ordered through parts (MT ). REQIREMENTS FOR OPERATION A mid PTO kit is required to operate this mower. The PTO kit can only be ordered through parts (MT ). 45 of 114 -CP1Z AUG-15

55 -CP1Z 03 MW SERIES MOWERS FOR FARMALL B (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL Weight Factory Data List Price MW166S FARMALL B 443 LB P11 $3, MW172S FARMALL B 443 LB P04 $3, of 114 -CP1Z AUG-15

56 -CP1A 01 RR SERIES REAR MOUNT FINISHING MOWERS (Ex Works Wholegoods Depot) Standard Equipment RR60 - RIGID FRAME: RR144 - FLEX WING: Category I 3-point mounted Overall Cutting Width - 12 ft. (3.66m) Flex finishing mower Center Deck Cutting Width - 5 ft. (1.52m) Cutting Width: 60 inches (1524mm) Wing Deck Cutting Width - 4 ft. (1.22m) Discharge: Rear Deck Overlap - 6 in. (152 mm) Discharge Safety Chain Overall Width in. (3.71m) PTO HP Rating: Up to 30 Transport Width in. (2.54m) Drive Method: Rear 540 RPM PTO Maximum Overall Length in. Number of Blades: 3 (4.62m) Blade Drive: V-Belt Transport Length in. (4.5m) Blade speed (RPM): 2,630 Transport Height - 90 in. (2.29m) Cutting Height: 1 to 4 in. (25 to 101mm) Minimum HP - 30 (4) Solid Rubber Gauge Wheels Cutting Height Range - 1 to 5 in. (fully rotating) (25 to 127 mm) Blade Tip Speed (FPM) - 16,000 RR72 - RIGID FRAME: Caster Wheels (12) - 15x Category I 3-point mounted Transport Tires (2) - 26x finishing Mower Cutting Width: 72 inches (1829mm) RR180 - FLEX WING: Discharge: Rear Overall Cutting Width - 15 ft. (4.57m) Flex Discharge Safety Chain Center Deck Cutting Width - 6 ft. (1.83m) PTO HP Rating: Up to 40 Wing Deck Cutting Width - 5 ft. (1.52m) Drive Method: Rear 540 RPM PTO Deck Overlap - 6 in. (152 mm) Number of Blades: 3 Overall Width in. (4.62m) Blade Drive: V-Belt Transport Width in. (2.57m) Blade speed (RPM): 2,230 Maximum Overall Length in. (4.7m) Cutting Height: 1 to 4 in. (25 to 101mm) Transport Length in. (4.57m) (4) Solid Rubber Gauge Wheels Transport Height in. (2.54m) (fully rotating) Minimum HP - 35 Cutting Height Range - 1 to 5 in. RR90 - RIGID FRAME: (25 to 127 mm) Category I 3-point mounted Blade Tip Speed (FPM) - 16,000 finishing mower Caster Wheels (12) - 15x Cutting Width: 90 inches (2286mm) Transport Tires (2) - 26x Discharge: Rear Discharge Safety Chain PTO HP Rating: Up to 60 Drive Method: Rear 540 RPM PTO Number of Blades: 5 Blade Drive: V-Belt Blade speed (RPM): 2,630 Cutting Height: 1 to 4 in. (25 to 101mm) (4) Solid Rubber Gauge Wheels (fully rotating) 47 of 114 -CP1A AUG-15

57 -CP1A 01 RR SERIES REAR MOUNT FINISHING MOWERS (Ex Works Wholegoods Depot) Standard Equipment RR204 - FLEX WING: RR204 - FLEX WING: (continued) Overall Cutting Width - 17 ft. (5.18m) Flex Transport Length in. (4.78m) Center Deck Cutting Width ft. Transport Height in. (2.79m) (2.29m) Minimum HP - 40 Wing Deck Cutting Width - 6 ft. (1.83m) Cutting Height Range - 1 to 5 in. Deck Overlap - 12 in. (305 mm) (25 to 127 mm) Overall Width in. (5.26m) Blade Tip Speed (FPM) - 16,000 Transport Width in. (2.59m) Caster Wheels (12) - 15x Maximum Overall Length in. Transport Tires (2) - 26x (4.98m) 48 of 114 -CP1A AUG-15

58 -CP1A 01 RR SERIES REAR MOUNT FINISHING MOWERS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL Weight Factory Data List Price RR60 60 INCH MOWER 2,000 LB P63 $2, RR72 72 INCH MOWER 2,000 LB P52 $3, RR90 90 INCH MOWER 2,000 LB P63 $4, RR FT MOWER 3,000 LB P29 $15, RR FT MOWER 3,520 LB P10 $17, RR FT MOWER 3,520 LB P73 $18, of 114 -CP1A AUG-15

59 50 of 114

60 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Standard Equipment Model BR160: (FOR FARMALL 31, 35, 40, 45 & 50) REQUIREMENTS FOR OPERATION: Quick attach design, mid-pto driven TRACTOR MID MOUNT PTO IS Sweeping width: 55 inches (1397mm) REQUIRED. Sweeping 25º: 49 inches (1245mm) If tractor is not equipped with Mid Broom diameter: 22 inches (560mm) Mount PTO, order appropriate kit from Brush type: Wafer tractor Parts Division Supplied Bristle material: Polypropylene Accessories chart. Manual angling: Standard Angling range: 0 to 25º (NOTE: On CVT version tractors, Drive system: PTO to Gearbox to Mid Mount PTO is only available as #50 HD chain a factory installed option.) Storage stand: Standard FOR FARMALL TRACTORS: Model BR172: TRACTOR MUST BE EQUIPPED WITH (FOR FARMALL 31, 35, 40, 45, 50, MID MOUNT VALVE AND JOYSTICK in 40B CVT, 45B CVT, and 50B CVT) order to operate loaders, front mount Quick attach design, Mid-PTO driven brooms, front mount blades or Sweeping width: 67 inches (1702mm) front mount snow blowers. Sweeping 25º: 60 inches (1525mm) If tractor was not ordered "Loader Broom diameter: 22 inches (560mm) Ready" please consult the Compact Bristle material: Polypropylene Tractor Parts Division Supplied Brush type: Wafer Accessories chart for valve and Manual angling: Standard joystick ordering information. Angling range: 0 to 25º Drive system: PTO to Gearbox to FOR FARMALL B TRACTORS: #50 HD chain Tractor comes equipped with Storage stand: Standard Mid-mount valve and Joystick as standard equipment Model BR172: (FOR FARMALL 30B, 35B, 40B & 50B) Quick attach design, Mid-PTO driven Sweeping width: 67 inches (1702mm) Sweeping 25º: 60 inches (1525mm) Broom diameter: 22 inches (560mm) Bristle material: Polypropylene Brush type: Wafer Manual angling: Standard Angling range: 0 to 25º Drive system: PTO to Gearbox to #50 HD chain Storage stand: Standard 51 of 114 -CP1C AUG-15

61 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price BR172 FARMALL B/C BR172 FOR FARMALL B 600 LB P99 $5, BR172 ROTARY BROOM BR172 FOR FARMALL CVT 500 LB P99 $5, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAME AND HITCH SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge Subframe 33/37/41/ P48 $1, For Farmall 30C/35C/40C/ 50C Front Quick Hitch 30/35/40/ P48 $1, For Farmall 30B, 35B, 40B and 50B Front Quick Hitch - Class 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT P35 $2, S-Frame CLS3AT MY14 Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above P35 $2, DRIVE COMPLETION KITS SD_03007 MID PTO DRIVE KIT X03007X No Mid PTO Drive Kit No Charge Mid PTO Drive Kit-III AT For Farmall 40C CVT, 45C CVT 50C CVT, 55C CVT, 40B CVT, 45B CVT, and 50B CVT P33 $ of 114 -CP1C AUG-15

62 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Mid PTO 32/36 HP T3 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline Mid PTO Tier 4 41/47 For Farmall 40C and 50C Mid PTO 30/35/40/50 For Farmall 30B, 35B, 40B and 50B P78 $1, P78 $1, P78 $1, HYDRAULIC ANGLING KIT SD_20087 HYDRAULIC FRAME ANGLING KIT X20087X No Hydraulic Angling Kit No Charge Hydraulic Angling Kit 26 LB P36 $ SIDE CASTERWHEELS KIT SD_29035 SIDE CASTER WHEEL KIT X29035X No Side Casterwheels Kit No Charge Side Casterwheels Kit 2 x 6 47 LB P36 $ ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge French Canadian 1 LB No Charge 53 of 114 -CP1C AUG-15

63 -CP1C 01 BR SERIES FRONT MOUNT ROTARY BROOMS (Ex Works Wholegoods Depot) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Quick Hitch and Subframe MALE HITCH/SUBFRAME 33/37/41/46 HP T4 For Farmall 30C/35C/40C/50C SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above 363 LB P48 $1, LB P48 $1, LB P35 $2, LB P35 $2, Mid PTO Drive Completion Kits MID PTO Drive Kit Cls 3 AT For Farmall 40 CVT, 45 CVT, 50 CVT, 40B CVT, 45B CVT, and 50B CVT MID PTO 32/36 HP T4 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline Mid PTO drive kit for 41/47 hp -T4 For Farmall 40C/ 50C MID PTO 30/35/40/50 HP Mid PTO drive kit for Farmall 30B, 35B, 40B and 50B Additional Attachments X 6 side caster w/wheel kit For BR160 and BR HYD ANGLING 60&72"(2.0,3.0) For Farmall 30, 35, 40, 45, 50, 30B, 35B, 40B, 50B, 40B CVT, 45B CVT, and 50B CVT 30 LB P33 $ LB P78 $1, LB P78 $1, LB P78 $1, LB P36 $ LB P36 $ of 114 -CP1C AUG-15

64 -CP1K 01 TL SERIES ROTARY TILLERS (Ex Works Wholegoods Depot) Standard Equipment TL160: TL172H: Recommended for use on Recommended for use on (Farmall 31, 35, 30B, and 35B) (Farmall 40, 45, 50, 55, 60, 40B, 50B, Approximate working width: 60 inches 40B CVT, 45B CVT, and 50B CVT) (1524mm) Approximate working width: 72 inches Tilling depth adjustment with guide (1830mm) shoes: 0 to 4.5 inches (0 to 114mm) Tilling depth adjustment with guide Maximum tilling depth without guide shoes: 0 to 5 inches (0 to 127mm) shoes: 7.25 inches (184mm) Maximum tillage depth without guide Hitch: Category I shoes: 7 inches (178mm) Offset Adjustment to Right: 11 inches Hitch: Category I or II (280mm) Offset Adjustment to Right: 11 inches PTO hp Rating: 45 (280mm) Rotor Drive Type: Chain PTO hp Rating: 60 Drive Protection: Slip Clutch Rotor Drive Type: Gear Rotor 540 RPM PTO: 236 RPM Drive Protection: Slip Clutch Number of Blades: 28 Rotor 540 RPM PTO: 211 RPM Blade Tip 540 RPM: Number of Blades: (FPM) Blade Tip 540 RPM: 944 (FPM) 55 of 114 -CP1K AUG-15

65 -CP1K 01 TL SERIES ROTARY TILLERS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price TL160 60IN ROT TILL TLX160 60IN CHAIN D 1,000 LB P01 $2, TL172H 72IN ROT TILL TL172H 72IN HD GEAR 1,000 LB P33 $3, Factory Supplied Options Order Code Description Weight Factory Data List Price ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge French Canadian 1 LB No Charge 56 of 114 -CP1K AUG-15

66 -CP1L 01 BM172H HEAVY DUTY: (FOR FARMALL 40, 45, 50, 40B CVT, 45B CVT, 50B CVT, 30B, 35B, 40B, and 50B) Quick attach design Moldboard width: 72 inches (1830mm) Moldboard height: 22 inches (560mm) Reversible cutting edge Cutting edge thickness: 0.5 inch (12.7mm) Hydraulic angling Angling range: 0 to 30 degrees Adjustable skid shoes REQUIREMENTS FOR OPERATION: FOR FARMALL TRACTORS: TRACTOR MUST BE EQUIPPED WITH MID MOUNT VALVE AND JOYSTICK in order to operate loaders, front mount brooms, front mount blades or front mount snow blowers. If tractor was not ordered "Loader Ready" please consult the Compact Tractor Parts Division Supplied Accessories chart for valve and joystick ordering information. FOR FARMALL B TRACTORS: Tractor comes equipped with Mid-mount valve and Joystick as standard equipment EX WORKS: Wholegoods (Ex Works Wholegoods Depot) Standard Factory Attachments (Ex Works Wholegoods Depot) BM SERIES FRONT MOUNTED BLADES -BM1 (Ex Works - See Standard Equipment) Standard Equipment 57 of 114 -CP1L AUG-15

67 -CP1L 01 BM SERIES FRONT MOUNTED BLADES -BM1 (Ex Works - See Standard Equipment) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price BM172H FR BLADE CL3 BM172H 72IN HD FRNT 300 LB P56 $2, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAME AND HITCH SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge Subframe 33/37/41/ P48 $1, For Farmall 30C/35C/40C/50C Front Quick Hitch 30/35/40/ P48 $1, For Farmall 30B, 35B, 40B and 50B Front Quick Hitch - Class 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT P35 $2, S-Frame CLS3AT MY14 Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above P35 $2, ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge French Canadian 1 LB No Charge 58 of 114 -CP1L AUG-15

68 -CP1L 01 BM SERIES FRONT MOUNTED BLADES -BM1 (Ex Works - See Standard Equipment) OTHER EQUIPMENT SD_50091 RUBBER BLADE EDGE X50091X No Rubber Cutting Edge No Charge Rubber Cutting Edge 61 LB P82 $ of 114 -CP1L AUG-15

69 -CP1L 01 BM SERIES FRONT MOUNTED BLADES -BM1 (Ex Works - See Standard Equipment) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Quick Hitch and Subframe MALE HITCH/SUBFRAME 33/37/41/46 HP T4 For Farmall 30C/35C/40C/50C SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above Additional Attachments Rubber Cutting Edge For BM172 and BM172H 363 LB P48 $1, LB P48 $1, LB P35 $2, LB P35 $2, LB P82 $ of 114 -CP1L AUG-15

70 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Standard Equipment BS163H HEAVY DUTY: BS172H HEAVY DUTY: For use with Farmall 31 and 35 ONLY For use with: Quick attach design, mid-pto driven Farmall 40, 45, 50, 40B CVT, Overall width: 63 inches (1600mm) 45B CVT, and 50B CVT ONLY Cutting width: 63 inches (1600mm) Quick attach design, mid-pto driven Cutting height: 22 inches (560mm) Overall width: 72 inches (1830mm) Number of blades: 4 Cutting width: 72 inches (1830mm) Fan diameter: 18 inches (457mm) Cutting height: 26 inches (660mm) Auger diameter: 14 inches (356mm) Number of blades: 4 Impeller drive: Gear box reduction Fan diameter: 24 inches (610mm) Auger Drive: Two-part chute with Auger diameter: 15 inches (381mm) manual chute rotation Impeller drive: Gear box reduction/ Shearbolt protection #60 HD chain Adjustable skid shoes Auger Drive: Two-part chute with Front mount and drive completion manual chute rotation package. Includes chute with Shearbolt protection mechanical rotation, female Adjustable skid shoes portion of quick hitch and Front mount and drive completion front half of driveline. package. Includes chute with mechanical rotation, female BS163B HEAVY DUTY: portion of quick hitch and For use with Farmall 30B, 35B, front half of driveline. 40B and 50B Tractors ONLY Quick attach design, mid-pto driven BS174H HEAVY DUTY: Overall width: 63 inches (1600mm) For use with Farmall 30B, 35B, Cutting width: 63 inches (1600mm) 40B and 50B Tractors ONLY Cutting height: 22 inches (560mm) Quick attach design, mid-pto driven Number of blades: 4 Overall width: 72 inches (1830mm) Fan diameter: 18 inches (457mm) Cutting width: 72 inches (1830mm) Auger diameter: 14 inches (356mm) Cutting height: 26 inches (660mm) Impeller drive: Gear box reduction Number of blades: 4 Auger Drive: Two-part chute with Fan diameter: 24 inches (610mm) manual chute rotation Auger diameter: 15 inches (381mm) Shearbolt protection Impeller drive: Gear box reduction/ Adjustable skid shoes #60 HD chain Front mount and drive completion Auger Drive: Two-part chute with package. Includes chute with manual chute rotation mechanical rotation, female Shearbolt protection portion of quick hitch and Adjustable skid shoes front half of driveline. Front mount and drive completion package. Includes chute with mechanical rotation, female portion of quick hitch and front half of driveline. 61 of 114 -CP1M AUG-15

71 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Standard Equipment REQUIREMENTS FOR OPERATION: If tractor was not ordered TRACTOR MID MOUNT PTO IS "Loader Ready" please consult the REQUIRED. If tractor is not equipped Compact Tractor Parts Division with Mid Mount PTO, order appropriate Supplied Accessories chart kit from tractor Parts Division Supplied for valve and joystick ordering Accessories chart. information. (Note: On CVT version tractors, FOR FARMALL B TRACTORS: Mid Mount PTO is only available as a Tractor comes equipped with factory installed option.) Mid-mount valve and Joystick as standard equipment FOR FARMALL TRACTORS: TRACTOR MUST BE EQUIPPED WITH MID MOUNT VALVE AND JOYSTICK in order to operate loaders, front mount brooms, front mount blades or front mount snow blowers. 62 of 114 -CP1M AUG-15

72 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price BS163H FARMALL B BS163H 63IN 1,005 LB P59 $5, BS174H FARMALL B BS174H 74IN 1,005 LB P74 $6, BS174H FARMALL C T4/CVT BS174J HD FR 450 LB P74 $6, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAME AND HITCH SD_N5701 HITCH AND SUBFRAME XN5701X No Front Mounting Brackets No Charge Front Quick Hitch 30/35/40/ P48 $1, For Farmall 30B, 35B, 40B and 50B Subframe 33/37/41/ P48 $1, For Farmall 30C/35C/40C/50C Front Quick Hitch - Class 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT P35 $2, S-Frame CLS3AT MY14 Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above P35 $2, FRONT MOUNTED DRIVE COMPLETING PACKAGE SD_03007 MID PTO DRIVE KIT X03007X No Mid PTO Drive Kit No Charge Mid PTO Drive Kit-III AT For Farmall 40, 45, 50, 40B, 45B & 50B - CVT Only P33 $ Mid PTO 30/35/40/50 For Farmall 30B, 35B, 40B and 50B P78 $1, of 114 -CP1M AUG-15

73 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Mid PTO 32/36 HP T3 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline Mid PTO Tier 4 41/47 For 40C and 50C P78 $1, P78 $1, FRONT MOUNTED FINAL DRIVE COMPLETION SD_29042 SNOW BLR CONFIG PKG Finishing Package 63" Front mount completion kit for Farmall 31 and 35 and for Farmall 30B, 35B, 40B and 50B Finishing Package 72"/74" Front mount completion kit for: Farmall 40 and 45 (HST or CVT) Farmall 50 (CVT) and Farmall 30B, 35B, 40B and 50B Farmall 40B CVT, 45B CVT and 50B CVT 232 LB No Charge 220 LB No Charge 3 PART CHUTE SD_ PART CHUTE X29036X No 3 Part Chute No Charge Part Chute For BH163H or BH172H. Not available with BH163H FARMALL B or BH174H FARMALL B. 49 LB P26 $ DRIFT CUTTER KIT SD_50028 DRIFT CUTTER KIT X50028X No Drift Cutter No Charge Drift Cutter 28 LB P50 $ ELECTRIC CHUTE DEFLECTOR SD_29038 ELEC CHUTE DEFLECT X29038X No Electric Chute Deflector No Charge Electric Chute Deflector 8 LB P77 $1, of 114 -CP1M AUG-15

74 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) HYDRAULIC CHUTE DEFLECTOR SD_20101 HYDRAULIC CHUTE DEF X20101X No Hydraulic Chute Deflector No Charge Hydraulic Chute Deflector 16 LB P35 $ HYDRAULIC CHUTE ROTATION SD_20088 HYDRAULIC CHUTE ROT X20088X No Hydraulic Chute Rotation No Charge Hydraulic Chute Rotation 11 LB P32 $1, ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge French Canadian 1 LB No Charge OTHER EQUIPMENT SD_40002 BALLAST BOX X40002X No Ballasting Box No Charge Ballasting Box Lbs. for 3-pt hitch 100 LB P19 $ of 114 -CP1M AUG-15

75 -CP1M 01 BS SERIES FRONT MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Quick Hitch and Subframe MALE HITCH/SUBFRAME 33/37/41/46 HP T4 For Farmall 30C/35C/40C/50C SUBFRAME 30/35/40/50 HP Quick hitch and subframe for Farmall 30B, 35B, 40B and 50B SUBFRAME CLS 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT Hitch and Sub Frame Implement Mounting Subframe for Farmall 45C CVT, 55C CVT and Farmall 40B CVT, 45B CVT, and 50B CVT - S/N ZDME22207 and Above Mid PTO Drive Completion Kits MID PTO Drive Kit Cls 3 AT For Farmall 40, 45, 40B CVT, 45B CVT, and 50B CVT Mid PTO drive kit for 41/47 hp -T4 For Farmall 40C/50C MID PTO 30/35/40/50 HP For Farmall 30B, 35B, 40B and 50B MID PTO 32/36 HP T4 For 30C and 35C Includes mid-drive shaft, support, and tractor half of front driveline. 363 LB P48 $1, LB P48 $1, LB P35 $2, LB P35 $2, LB P33 $ LB P78 $1, LB P78 $1, LB P78 $1, Additional Attachments Drift Cutter 28 LB P50 $ For BS172H or BH174H Ballast Box 500 Lb Max 0.5, LB P19 $ Part Chute 45 LB P26 $ For BH163H or BH172H. Not available with BH163H FARMALL B or BH174H FARMALL B Hyd chute deflector 15 LB P35 $ For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H Electric chute deflector 15 LB P77 $1, For BH163H, BH163B, BH172H or BH174H HYDRAULIC CUTE ROTATION KIT 10 LB P32 $1, For 2 or 3 part chute for BH163H, BH163B, BH172H or BH174H ATTACHMENT, FRT MTG COMP. 205 LB P44 $1, Front mount completion kit (63") for Farmall 31 and 35 and also for Farmall 30B, 35B, 40B and 50B FRONT PACKAGE Front mount completion kit (72") for Farmall 40, 45, 50, 40B CVT, 45B CVT, and 50B CVT also (74") for Farmall 30B, 35B, 40B, 50B 128 LB P44 $1, of 114 -CP1M AUG-15

76 -CP1M 02 BS164R: For use on Farmall 31 and 35 3-point mounted, two-stage, rear PTO driven Overall width: 64 inches (1625mm) Cutting width: 64 inches (1625mm) Cutting height: 26 inches (660mm) Number of blades: 4 Fan diameter: 24 inches (610mm) Auger diameter: 15 inches (381mm) Auger drive: #60 chain Manual or hydraulic chute rotation optional Shearbolt protection Adjustable skid shoes Hitch, Driveline, Chute Manual chute rotation kit BS174R: For use on Farmall 31, 35, 40, 45, 50, 55, 60, 40B CVT, 45B CVT, and 50B CVT 3-point mounted, two-stage, rear PTO driven Overall width: 74 inches (1880mm) Cutting width: 74 inches (1880mm) Cutting height: 26 inches (660mm) Number of blades: 4 Fan diameter: 24 inches (610mm) Auger diameter: 15 inches (381mm) Auger drive: #60 chain Manual or hydraulic chute rotation optional Shearbolt protection Adjustable skid shoes Hitch, Driveline, Chute Manual chute rotation kit BS SERIES REAR MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Standard Equipment 67 of 114 -CP1M AUG-15

77 -CP1M 02 BS SERIES REAR MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price BS164R SNOW BLOWER BS164R 64IN CAT LB P44 $3, Includes the following Equipment Manual Chute Rotation Kit (715343) $ BS174R SNOW BLOWER BS174R 74IN CAT LB P26 $4, Includes the following Equipment Manual Chute Rotation Kit (715343) $ Factory Supplied Options Order Code Description Weight Factory Data List Price FRONT MOUNTED FINAL DRIVE COMPLETION SD_29042 SNOW BLR CONFIG PKG Manual Chute Rotation Kit 26 LB P55 $ Hydraulic Chute Rotation Kit Hoses not included, One tractor rear remote valve is required for operation. Please consult the appropriate Tractor Model Price List for valve ordering information. 80 LB P86 $ ADDITIONAL OPERATOR'S MANUAL SD_47083 OPERATOR'S MANUAL X47083X No Additional Operators Manual No Charge French Canadian 1 LB No Charge 68 of 114 -CP1M AUG-15

78 -CP1M 02 BS SERIES REAR MOUNT SNOW BLOWERS (Ex Works Wholegoods Depot) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Manual Roation IN 9 LB P55 $ Hydraulic Rotation 64IN 52 LB P86 $ of 114 -CP1M AUG-15

79 70 of 114

80 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) Standard Equipment TRACTOR APPLICATION: TRACTOR APPLICATION: Farmall 30C, 35C, 40C, 50C Farmall 30C, 35C, 40C, 50C Farmall 45C and 55C CVT Farmall 45C and 55C CVT Farmall 40B, 45B, and 50B CVT Farmall 40B, 45B, and 50B CVT Farmall 30B, 35B, 40B, 50B Farmall 30B, 35B, 40B, 50B BACKHOE MODEL: BHA90 BACKHOE MODEL: BHA102 ( ) ( ) *SPECIFICATIONS: *SPECIFICATIONS: Digging Depth - 92 in. Digging Depth in. Reach from Swing Pivot in. Reach from Swing Pivot in. Transport Height - 77 in. Transport Height - 88 in. Bucket Rotation Bucket Rotation Stabilizer Spread: Stabilizer Spread: Transport - 49 in. Transport - 56 in. Operating in. Operating in. Loading Height 70 in. Loading Height 76.0 in. Swing Arc Swing Arc Bucket Digging Forces lb. Bucket Digging Forces lb. Dipper Stick Digging Forces lb. Dipper Stick Digging Forces lb. Shipping Weight lb. Shipping Weight lb. Operating Pressure psi Operating Pressure psi *Specifications may vary with tractor *Specifications vary with tractor model, model, hydraulic system, tire size, etc. hydraulic system, tire size, etc. IMPORTANT INFORMATION IMPORTANT INFORMATION The tractor must be equipped with a The tractor must be equipped with a front end loader or front mount blade front end loader or front mount blade when installing a 900 Series backhoe. when installing a 900 Series backhoe. Note: Mid-mount mower is not Note: Mid-mount mower is not compatible with backhoe installed. compatible with backhoe installed. The following items are required to The following items are required to make up a complete backhoe: make up a complete backhoe: - Basic Packaged Backhoe - Basic Packaged Backhoe - Subframe (one required) - Subframe (one required) - Hydraulic Kit (one required) - Hydraulic Kit (one required) - Bucket (one required) - Bucket (one required) - Optional Equipment - Optional Equipment 71 of 114 -CP2C AUG-15

81 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price BHA90 BACKHOE BHA90A 1,065 LB P35 $7, BHA102 BACKHOE BHA102 1,065 LB P85 $8, Factory Supplied Options Order Code Description Weight Factory Data List Price SUBFRAMES SD_N5701 HITCH AND SUBFRAME Subframe Economy For Compact Farmall 30A/35A Front Quick Hitch - Class 3 Implement Mounting Subframe for Farmall 40B CVT, 45B CVT, and 50B CVT - Prior to S/N ZDME22207; and Discontinued Farmall 40 HST, 45 HST, 40 CVT, 45 CVT, 50 CVT, 55 CVT Subframe CL2 For Farmall 30C/35C and Farmall 30B/35B If ordering for a 30B or 35B (439118) FR HANGER BRKT CLS 2 MUST BE ordered in addition Subframe CL3 For Farmall 40C/50C and Farmall 40B/50B If ordering for a 40B or 50B (439119) FR HANGER BRKT CLS 3 MUST BE ordered in addition No Charge No Charge No Charge No Charge SD_N5702 FRONT BRACKETS XN5702X No Front Brackets No Charge Fr Hanger Brkt Cls P50 $50.00 Front Hanger Kit for Farmall 30B/35B - Must be used with (Farmall 30C/35C subframe) to allow Tier 4 subframe to fit Tier 3 units Fr Hanger Brkt Cls 3 Front Hanger Kit for Farmall 40B/50B - Must be used with (Farmall 40C/50C subframe) to allow Tier 4 subframe to fit Tier 3 units P50 $ of 114 -CP2C AUG-15

82 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) HYDRAULIC KITS SD_20102 HYDRAULIC KIT Hyd Kit Economy For Compact Farmall 30A/35A Hyd Kit Cls 3 CVT For Farmall CVT Hyd Kit Cls 2 ROPS Farmall 30C/35C and Discontinued Farmall 30B/35B Hyd Kit Cls 3 ROPS Farmall 40C/50C and Discontinued Farmall 40B/50B No Charge No Charge No Charge No Charge BUCKET SD_N IN STD BUCKET XN5403X No 12 In. Standard Bucket No Charge In./305mm Standard Bucket P25 $ SD_N IN STD BUCKET XN5405X No 16 In. Standard Bucket No Charge In. Standard Bucket P06 $ SD_N IN STD BUCKET XN5407X No 18 In. Standard Bucket No Charge In./457mm Standard Bucket P00 $ SD_N IN STD BUCKET XN5409X No 24 In. Standard Bucket No Charge In. Standard Bucket P10 $ FACTORY SUPPLIED ACCESSORIES - IMPLEMENTS FOR COMPACT/MIDRANGE TRACTORS QUICK HITCH AND SUBFRAME SD_50005 BIG FOOT DIRT PADS X50005X No Big Foot Dirt Pads No Charge Big Foot Dirt Pads P50 $ SD_50092 RUBBER STREET PADS X50092X No Rubber Street Pads No Charge Rubber Street Pads P67 $ of 114 -CP2C AUG-15

83 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) SD_N6413 MECH THUMB XN6413X No Mechanical Thumb No Charge Mechanical Thumb P08 $ BHA90 only Mechanical Thumb Class 3 BHA102 only P08 $ of 114 -CP2C AUG-15

84 -CP2C 01 BHA SERIES BACKHOES (Ex Works Telford, TN) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Front Hanger Bracket Class 2 40 LB P50 $50.00 Front Hanger Kit for Farmall 30B/35B - Must be used with (Farmall 30C/35C subframe) to allow Tier 4 subframe to fit Tier 3 units Front Hanger Bracket Class 3 Front Hanger Kit for Farmall 40B/50B - Must be used with (Farmall 40C/50C subframe) to allow Tier 4 subframe to fit Tier 3 units. 40 LB P50 $ In 3 Teeth 1.02 Cu. Ft Heaped Std/ LB P25 $ In 4 Teeth 1.38 Cu. Ft Heaped Std/ LB P06 $ In 4 Teeth 1.57 Cu. Ft Heaped Std/ LB P00 $ In 4 Teeth 2.13 Cu. Ft Heaped Std/ LB P10 $ Big Foot Dirt Pads 52 LB P50 $ Mechanical Thumb Class Ft 90 LB P08 $ BHA90 only Mechanical Thumb Class Ft BHA102 only 90 LB P08 $ Rubber Street Pads 4 LB P67 $ of 114 -CP2C AUG-15

85 76 of 114

86 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Standard Equipment ROTARY CUTTER - ECONOMY ROTARY CUTTER - STANDARD DUTY (3-POINT): (3-POINT): RC480: RC605: Cutting Width: 48 in. Cutting Width: 60 in. Cutting Height: 1 in. (min.) Cutting Height: 2 1/2 in. (min.) Cutting Capacity: 2 in. (max.) Cutting Capacity: 2 1/2 in. (max.) Blade Carrier: Pan Blade Carrier: Pan Deck Thickness: 10 gauge Deck Thickness: 7 gauge Safety Deflectors: Rear Rubber Belting Safety Deflectors: Rear Rubber Belting Driveline Size: Cat rpm Driveline Size: Cat rpm Slip Protection: Shear Pin Slip Protection: Splined Slip Clutch Tire and Wheel: Laminated Tire and Wheel: Laminated 1 spindle 1 spindle Single tail wheel RC600: Cutting Width: 60 in. RC725: Cutting Height: 2 in. (min.) Cutting Width: 83 in. Cutting Capacity: 2 in. (max.) Cutting Height: 2 in. (min.) Blade Carrier: Pan Cutting Capacity: 2 1/2 in. (max.) Deck Thickness: 7 gauge Blade Carrier: Pan Safety Deflectors: Rear Rubber Belting Deck Thickness: 7 gauge Driveline Size: Cat rpm Safety Deflectors: Rear Rubber Belting Slip Protection: Shear Pin Driveline Size: Cat rpm Tire and Wheel: Laminated Slip Protection: Slip Clutch 1 spindle Tire and Wheel: Laminated 1 spindle RC720: Single tail wheel Cutting Width: 72 in. Cutting Height: 2 in. (min.) RC840: Cutting Capacity: 2 in. (max.) Cutting Width: 83 in. Blade Carrier: Pan Cutting Height: 2 in. (min.) Deck Thickness: 7 gauge Cutting Capacity: 2 1/2 in. (max.) Safety Deflectors: Rear Rubber Belting Blade Carrier: Pan Driveline Size: Cat rpm Deck Thickness: 7 gauge Slip Protection: Shear Pin Safety Deflectors: Rear Rubber Belting Tire and Wheel: Laminated Driveline Size: Cat rpm 1 spindle Slip Protection: Slip Clutch Tire and Wheel: Laminated 1 spindle Single tail wheel 77 of 114 -CP1T AUG-15

87 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Standard Equipment ROTARY CUTTER - HEAVY DUTY ROTARY CUTTER - HEAVY DUTY (3-POINT): (3-POINT): (continued) RC727: RC960: Cutting Width: 72 in. Cutting Width: 96 in. Cutting Height: 2 in. (min.) Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) Cutting Capacity: 3 in. (max.) Blade Carrier: Pan Blade Carrier: Pan Deck Thickness: 7 gauge Deck Thickness: 3/16 x 7 gauge Safety Deflectors: Front and Rear Safety Deflectors: Front and Rear Chains Chains Driveline Size: Cat rpm Driveline Size: Cat rpm Slip Protection: Splined Slip Clutch Slip Protection: Slip Clutch Tire and Wheel: Laminated Tire and Wheel: Laminated 1 spindle 2 spindle Single tail wheel Dual tail wheel RC845: ROTARY CUTTER - HEAVY DUTY Cutting Width: 84 in. (PULL-TYPE): Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) RC1200: Blade Carrier: Pan Cutting Width: 120 in. Deck Thickness: 7 gauge Cutting Height: 2 in. (min.) Safety Deflectors: Front and Rear Cutting Capacity: 3 in. (max.) Chains Blade Carrier: Pan Driveline Size: Cat rpm Deck Thickness: 7 gauge Slip Protection: Splined Slip Clutch Safety Deflectors: Front and Rear Tire and Wheel: Laminated Chains 1 spindle Main Driveline: Cat. 5 CV w/ Single tail wheel Slip Clutch rpm Tire and Wheel: Laminated RC84HD: 2 spindle Cutting Width: 84 in. Cutting Height: 2 in. (min.) Cutting Capacity: 4 in. (max.) Blade Carrier: Pan Deck Thickness: 3/16 x 7 gauge Safety Deflectors: Front and Rear Chains Driveline Size: Cat rpm Slip Protection: Slip Clutch Tire and Wheel: Laminated 1 spindle Dual tail wheel 78 of 114 -CP1T AUG-15

88 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Standard Equipment ROTARY CUTTER - HEAVY DUTY REQUIREMENTS FOR OPERATION: (PULL-TYPE): (continued) Tractor Horsepower (Max.): RC480 - up to 48 RC rpm driveline: RC600 - up to 48 (Standard and RC720 - up to 48 Smooth Top/Double Deck) RC605 - up to 65 Cutting Width: 180 in. RC725 - up to 65 Cutting Height: 2 in. (min.) RC840 - up to 65 Cutting Capacity: 3 in. (max.) RC727 - up to 95 Blade Carrier: Pan RC845 - up to 95 Deck Thickness: 7 gauge RC84HD - up to 140 Safety Deflectors: Front and Rear RC960 - up to 140 Chains RC up to 150 Main Driveline: Cat. 5 CV w/ RC up to 210 Slip Clutch 540 rpm Outboard Drivelines to wings: Cat. 4 w/slip Clutch Tire and Wheel: Laminated 3 spindle RC rpm driveline: (Standard and Smooth Top/Double Deck) Cutting Width: 180 in. Cutting Height: 2 in. (min.) Cutting Capacity: 3 in. (max.) Blade Carrier: Pan Deck Thickness: 7 gauge Safety Deflectors: Front and Rear Chains Main Driveline: Cat. 5 CV w/ Slip Clutch 1000 rpm - 1 3/8 in. shaft 1000 rpm - 1 3/4 in. shaft Outboard Drivelines to wings: Cat. 4 w/slip Clutch Tire and Wheel: Aircraft (used) 3 spindle Hydraulic level lift 79 of 114 -CP1T AUG-15

89 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price RC480 ROTARY CUTTR 48 in. standard-duty 5,894 LB P75 $1, RC600 ROTARY CUTTR 60 in. standard-duty 781 LB P71 $1, RC720 ROTARY CUTTR 72 in. standard-duty 885 LB P02 $2, RC605 ROTARY CUTTR 60 in. medium-duty 885 LB P48 $2, RC725 ROTARY CUTTR 72 in. medium-duty 903 LB P66 $2, RC840 ROTARY CUTTR 84 in. medium-duty 1,400 LB P70 $3, RC727 ROTARY CUTTR 72 in. HD single tail 1,193 LB P01 $3, RC845 ROTARY CUTTR 84 in. HD single tail 1,193 LB P68 $5, RC84HD ROTARY CUTTR 84 in. HD dual tail 1,680 LB P31 $7, RC960 ROTARY CUTTR 96 in. HD dual tail 1,749 LB P39 $8, RC1200 ROTARY CUTTR 540 rpm, 120 in. 1,749 LB P39 $11, RC RPM 540 rpm, 180 in. 1,749 LB P41 $19, RC RPM 1-3/ rpm 180 in.1-3/8 in. shft 5,594 LB P40 $22, RC RPM 1-3/ rpm 180 in.1-3/4 in. shft 1,749 LB P40 $22, RC RPM DD 540rpm, 180 in. Dbl Deck 5,594 LB P86 $22, RC /8 DD 1000rpm,180in.1-3/8 Dbl Deck 5,594 LB P19 $25, RC /4 DD 1000rpm,180in.1-3/4 Dbl Deck 1,749 LB P19 $25, Factory Supplied Options Order Code Description Weight Factory Data List Price OTHER EQUIPMENT SD_16049 EXTRA WHEELS, TIRES AND RIMS X16049X No Extra Wheels and Tires No Charge Aircraft Tires (2) Available on RC1800 with 1000RPM driveline P20 $ Aircraft Tires (6) P60 $1, Available on RC1800 with 540RPM driveline Aircraft Tires (8) P19 $1, Available on RC1800 with 540RPM driveline Foam Filled P Tire P19 $1, Available on all RC1800 Models Foam Filled P Tire 8 Available on all RC1800 Models P87 $2, of 114 -CP1T AUG-15

90 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) SD_N6428 FRONT SAFETY CHAINS XN6428X No Front Safety Chains No Charge Front Safety Chains Available on RC480, RC600 and RC P38 $ SD_N6429 REAR SAFETY CHAINS XN6429X No Rear Safety Chain No Charge Rear Safety Chains Available on RC480, RC600 and RC P38 $ SD_N6430 SLIP CLUTCH XN6430X No Slip Clutch No Charge Slip Clutch Available on RC480, RC600 and RC P18 $ SD_N6431 DUAL TAIL WHEEL XN6431X No Dual Tail Wheel No Charge Dual Tail Wheel Available on RC605, RC725, RC727, RC840, RC845, and RC P66 $ SD_N6432 HYD LIFT XN6432X No Hyd Lift No Charge Hyd Lift Available on RC1800 with 540RPM driveline P27 $1, SD_N6433 COATING XN6433X No Coating No Charge Galvanized if MODEL is 72 in. standard-duty P24 $ if MODEL is 60 in. medium-duty P24 $ if MODEL is 48 in. standard-duty P24 $ if MODEL is 72 in. medium-duty P24 $ if MODEL is 60 in. standard-duty P24 $ if MODEL is 84 in. medium-duty P24 $ if MODEL is 540 rpm, 120 in P06 $ if MODEL is 96 in. HD dual tail P06 $ if MODEL is 84 in. HD dual tail P06 $ if MODEL is 84 in. HD single tail P06 $ if MODEL is 72 in. HD single tail P06 $ if MODEL is 540 rpm, 180 in P72 $ if MODEL is 540rpm, 180 in. Dbl Deck P72 $ if MODEL is 1000 rpm 180 in.1-3/4 in. shft P72 $ if MODEL is 1000 rpm 180 in.1-3/8 in. shft P72 $ if MODEL is 1000rpm,180in.1-3/4 Dbl Deck P72 $ if MODEL is 1000rpm,180in.1-3/8 Dbl Deck P72 $ of 114 -CP1T AUG-15

91 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) SD_N6436 QUICK ATTACH HITCH XN6436X No Quick Attach Hitch No Charge Quick Attach Hitch Availiable on RC480, RC600, RC605, RC720, RC725, RC727, RC840, RC845, RC84HD, RC P91 $ of 114 -CP1T AUG-15

92 -CP1T 01 RC ROTARY CUTTERS (Ex Works Beaumont, TX) Factory Supplied Attachments Order Code Description Weight Factory Data List Price Front Safety Chains " Front Safety Chains Available on RC " Front Safety Chains Available on RC " Front Safety Chains Available on RC720 Rear Safety Chains " Rear Safety Chains Available on RC " Rear Safety Chains Available on RC " Rear Safety Chains Available on RC LB P38 $ LB P38 $ LB P38 $ LB P38 $ LB P38 $ LB P38 $ of 114 -CP1T AUG-15

93 84 of 114

94 -CP1U 01 WORK EZ DISK HARROW (Ex Works Beaumont, TX) Standard Equipment 78 IN. DISK HARROW: REQUIREMENTS FOR OPERATION: Number of Disk Blades: 20 notched Tractor Horsepower (Min./Max.): (front and rear) Hitch: Cat. I EZ Match compatible Disk Blade Size: 18 in. diameter Disk Blade Spacing: 5 1/2 in. F, 6 1/2 in., 7 1/2 in. R Maximum Cutting Depth: 6 in. Cutting Width: 70 in. Overall Length: 60 in. Overall Width: 79 in. Bearing Lubrication: sealed bearings Adjustable gang angle 85 of 114 -CP1U AUG-15

95 -CP1U 01 WORK EZ DISK HARROW (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ DISK HARROW EZ78DC 78in Disk Harrow 678 LB P91 $2, of 114 -CP1U AUG-15

96 -CP1V 01 WORK EZ RAKES (Ex Works Beaumont, TX) Standard Equipment LANDSCAPE RAKE: REQUIREMENTS FOR OPERATION: Rake Width: Maximum Tractor Horsepower: 50 60LR - 60 in. Hitch: Cat. I EZ Match compatible 72LR - 72 in. 84LR - 84 in. Tine Spacing: 1 in. Tine Size: 5/16 x 1 in. Tine Material: high carbon spring steel Angle: 5 forward / 3 reverse Rake Pivot: 360 Pivot King Pin: 1 1/4 in. 87 of 114 -CP1V AUG-15

97 -CP1V 01 WORK EZ RAKES (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 60LR RAKE EZ60L 60in Landsc Rake 245 LB P93 $ WORK EZ 72LR RAKE EZ72LR 72in Landsc Rake 269 LB P49 $1, WORK EZ 84LR RAKE EZ84LR 84in Rock Rake 326 LB P09 $1, of 114 -CP1V AUG-15

98 -CP1W 01 WORK EZ BOX BLADES (Ex Works Beaumont, TX) Standard Equipment BOX BLADES: INDUSTRIAL (For Contractors): STANDARD DUTY (For Estate and Homeowners): OPTIONAL hydraulic raise/lower shank bar (infinite adjustment) Number of Scarifiers (Shanks): 4 to 5 Number of Scarifiers (Shanks): 8 Overall Height: 35 1/2 in. Overall Height: 36 in. Box Depth: 17 in. Box Depth: 19 in. Cutting Edge: 1/2 x 6 in., Reversible Cutting Edge: 1/2 x 6 in., Reversible Number of Cutting Edges: 2 Number of Cutting Edges: 2 Shank Adjustment: manual Shank Adjustment: manual Side Plate (Endplate) Thickness: Side Plate (Endplate) Thickness: 3/16 in. 3/4 in. Hinges Rear Flat with Cutting Edge: Hinges Rear Flat with Cutting Edge: n/a Standard MEDIUM DUTY (For Landscapers): REQUIREMENTS FOR OPERATION: OPTIONAL hydraulic raise/lower shank Tractor Horsepower (Max.): bar (infinite adjustment) 48BL - up to 28 2wd / 20 4wd Number of Scarifiers (Shanks): 6 60BL - up to 28 2wd / 20 4wd Overall Height: 36 in. 60BM - up to 50 2wd / 40 4wd Box Depth: 17 in. 72BM - up to 50 2wd / 40 4wd Cutting Edge: 1/2 x 6 in., Reversible 84BM - up to 50 2wd / 40 4wd Number of Cutting Edges: 2 72BH - up to 75 2wd / 55 4wd Shank Adjustment: manual 84BH - up to 75 2wd / 55 4wd Side Plate (Endplate) Thickness: 96BI - up to 100 2wd / 80 4wd 3/8 in. Hinges Rear Flat with Cutting Edge: 3 Pt. Hitch: n/a 48BL - Cat. I EZ Match compatible 60BL - Cat. I EZ Match compatible HEAVY DUTY (For Contractors): 60BM - Cat. I 72BM - Cat. I OPTIONAL hydraulic raise/lower shank 84BM - Cat. I bar (infinite adjustment) 72BH - Cat. I Number of Scarifiers (Shanks): 6 84BH - Cat. I Overall Height: 36 in. 96BI - Cat. II Box Depth: 19 in. Cutting Edge: 1/2 x 6 in., Reversible Number of Cutting Edges: 2 Shank Adjustment: manual Side Plate (Endplate) Thickness: 1/2 in. Hinges Rear Flat with Cutting Edge: Standard 89 of 114 -CP1W AUG-15

99 -CP1W 01 WORK EZ BOX BLADES (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 48BL BLADE 48in 3pt Box Std Duty 313 LB P95 $ WORK EZ 60BL BLADE 60in 3pt Box Std Duty 387 LB P65 $1, WORK EZ 60BM BLADE 60in 3pt Box Med Duty 484 LB P44 $1, WORK EZ 60BM BLADE 60in 3pt Box Med Duty - Hydr 701 LB P79 $1, WORK EZ 72BM BLADE 72in 3pt Box Med Duty 543 LB P51 $1, WORK EZ 72BM BLADE 72in 3pt Box Med Duty - Hydr 701 LB P40 $2, WORK EZ 84BM BLADE 84in 3pt Box Med Duty 603 LB P12 $1, WORK EZ 84BM BLADE 84in 3pt Box Med Duty - Hydr 701 LB P24 $2, WORK EZ 72BH BLADE 72in 3pt Box Hvy Duty 704 LB P42 $2, WORK EZ 72BH BLADE 72in 3pt Box Hvy Duty - Hydr 701 LB P55 $2, WORK EZ 84BH BLADE 84in 3pt Box Hvy Duty 803 LB P71 $2, WORK EZ 84BH BLADE 84in 3pt Box Hvy Duty - Hydr 803 LB P61 $3, WORK EZ 96BI BLADE 96in 3pt Box Ind Duty 1,153 LB P27 $2, WORK EZ 96BI BLADE 96in 3pt Box Ind Duty - Hydr 701 LB P70 $4, Factory Supplied Options Order Code Description Weight Factory Data List Price OTHER OPTIONS SD_N6433 COATING XN6433X No Coating No Charge Galvanized P46 $ of 114 -CP1W AUG-15

100 -CP1X 01 WORK EZ REAR BLADES (Ex Works Beaumont, TX) Standard Equipment REAR BLADES: REQUIREMENTS FOR OPERATION: STANDARD UTILITY (For Estate and Tractor Horsepower (max.): Homeowners): 60SL - 30 Moldboard Width: 60 in. / 72 in. 72SL - 30 Cutting Edge: 1/2 in. x 6 in. 60SM - 40 Offset Adjustment: 12 in. 72SM - 40 Tilt Adjustment: n/a 84SM - 40 Angle Adjustment: 5 Forward / 3 72SH - 65 Reverse positions 84SH SI MEDIUM DUTY (For Landscapers, Farm, 108SI or Ranch): 96SHI Moldboard Width: 60 in. / 72 in. / 84 in. 120SHI Cutting Edge: 1/2 in. x 6 in. 144SHI Offset Adjustment: 12 in. Tilt Adjustment: 45 / E side 3 Pt. Hitch: Angle Adjustment: 5 Forward / 3 60SL - Cat. I EZ Match compatible Reverse positions 72SL - Cat. I EZ Match compatible 60SM - Cat. I EZ Match compatible HEAVY DUTY (For Contractors): 72SM - Cat. I EZ Match compatible Moldboard Width: 84 in. / 96 in. 84SM - Cat. I EZ Match compatible Cutting Edge: 1/2 in. x 6 in. 72SH - Cat. I/II Offset Adjustment: 12 in. 84SH - Cat. I/II Tilt Adjustment: 30 96SI - Cat. II Angle Adjustment: 5 Forward / 3 108SI - Cat. II Reverse positions 96SHI - Cat. II/III 120SHI - Cat. II/III INDUSTRIAL (For Contractors): 144SHI - Cat. II/III Moldboard Width: 96 in. / 108 in. Cutting Edge: 1/2 in. x 6 in. Offset Adjustment: 12 in. Tilt Adjustment: 15 Angle Adjustment: 30 HEAVY INDUSTRIAL (For Contractors): Moldboard Width: 96 in./120 in./144 in. Cutting Edge: 1/2 in. x 6 in. Offset Adjustment: 24 in. Tilt Adjustment: 15 Angle Adjustment: of 114 -CP1X AUG-15

101 -CP1X 01 WORK EZ REAR BLADES (Ex Works Beaumont, TX) Models COMMERCIAL MODEL MODEL Weight Factory Data List Price WORK EZ 60SM BLADE 60in 3pt Rear Med Duty 256 LB P19 $ WORK EZ 72SM BLADE 72in 3pt Rear Med Duty 278 LB P14 $1, WORK EZ 84SM BLADE 84in 3pt Rear Med Duty 297 LB P24 $1, WORK EZ 84SH BLADE 84in 3pt Rear Hvy Duty 584 LB P28 $1, WORK EZ 96SH BLADE 96in 3pt Rear Hvy Duty 679 LB P76 $1, WORK EZ 96SI BLADE 96in 3pt Rear Ind Duty 1,074 LB P80 $4, WORK EZ 108SI BLADE 108in 3pt Rear Ind Duty 1,113 LB P58 $4, WORK EZ 96SHI BLADE 96in 3pt Rear Hvy Industrial 2, P21 $10, WORK EZ 120SHI BLADE 108in 3pt Rear Hvy Industrial 2,260 LB P40 $10, WORK EZ 144SHI BLADE 144in 3pt Rear Hvy Industrial 2,400 LB P97 $11, of 114 -CP1X AUG-15

102 -CP2A 01 WORK EZ EZ MATCH (Distribution Center) Standard Equipment The WORK EZ EZ Match Quick Hitch The following Case-IH products are is designed to make changing from one quick hitch compatible: 3-point hitch attachment to another quick and EZ! The upper hook easily slips into EZ78DC - 78 in. Disk Harrow position and simply lock the lower hooks EZ60LR - 60 in. Landscape Rake with quick flip of two handles - many EZ72LR - 72 in. Landscape Rake times from the comfort and convenience EZ84LR - 84 in. Rock Rake of the tractor seat. EZ48BL - 48 in. Standard Duty Box Blade EZ60BL - 60 in. Standard Duty Box Blade Designed for use on Category 1, 3-point EZ60SL - 60 in. Standard Utility hitch tractors and implements Rear Blade EZ72SL - 72 in. Standard Utility Heavy-duty steel construction Rear Blade Lower arms lock automatically EZ60SM - 60 in. Medium Duty Fast, easy attachment and release Rear Blade Designed to ASAE S278.7 Quick Hitch EZ72SM - 72 in. Medium Duty standards Rear Blade EZ84SM - 84 in. Medium Duty MODEL: WORK EZ EZ Match Rear Blade Width (inches) - 28 center to center (Hooks are 1-1/2 " wide) Height (inches) - 24 Weight (pounds) - 80 Maximum Horsepower of 114 -CP2A AUG-15

103 -CP2A 01 WORK EZ EZ MATCH (Distribution Center) Models COMMERCIAL MODEL Weight Factory Data List Price WORK EZ EZ MATCH 400 LB P33 $ of 114 -CP2A AUG-15

104 -CP2B 01 WORK EZ BALE CARRIERS Standard Equipment WORK EZ Bale Carriers and Spears MODEL: Work EZ Bale Spear are designed to compliment compact Application - Standard duty and utility tractors equipped with 3-point Weight - 98 lbs hitch for handling round and square hay Weight rating lbs bales. The WORK EZ Bale Carriers Tractor Horsepower (max) - 60 and Spears are also Work EZ - EZ Hitch - Cat. I Match compatible. Hot dipped galvanized frame Replaceable high carbon steel spear MODEL: Work EZ Bale Carrier Two welded bottom stabilizing spears Application - Standard duty Weight lbs Weight rating lbs Tractor horsepower (max) - 60 Hitch - Cat. I Hot dipped galvanized frame NOTE: Fork tines go under bale 95 of 114 -CP2B AUG-15

105 -CP2B 01 WORK EZ BALE CARRIERS Models COMMERCIAL MODEL Weight Factory Data List Price WORK EZ BALE CARRIER 88 LB P03 $ WORK EZ BALE SPEAR 155 LB P68 $ of 114 -CP2B AUG-15

106 -CP2B 02 WORK EZ HAY SPEARS Standard Equipment WORK EZ Hay Spears are designed to MODEL: Work EZ Double Bale Quick compliment most tractors and skid Attach steers that are Universal Quick Hitch Application - Standard duty Compatible for handling round and Weight lbs square hay bales. Weight rating lbs Tractor Horsepower (max) - 80 MODEL: Work EZ Single Bale Quick Hitch - Universal Q/A Attach Hot dipped galvanized frame Application - Standard duty Two replaceable high carbon steel Weight lbs spears Weight rating lbs One welded top stabilizing spear Tractor Horsepower (max) - 80 Hitch - Universal Q/A Hot dipped galvanized frame Replaceable high carbon steel spear Two welded bottom stabilizing spears 97 of 114 -CP2B AUG-15

107 -CP2B 02 WORK EZ HAY SPEARS Models COMMERCIAL MODEL Weight Factory Data List Price WORKEZ SNGL BALE QA 168 LB P53 $ WORKEZ DBL BALE QA 153 LB P16 $ of 114 -CP2B AUG-15

108 PARTSDIVISIONSUPPLIEDACCESSORIESFARMALLBSERIESTRACTORS Part# Description Farmall30B/35B Farmall40B/50B ROPS/FOPSGROUP FOPScanopyforrollbarwhite X X FFB1A32W Sunshadecanopywhite X X HYDRAULICSGROUP Singlerearremote;3position,selfcentering,leverknobandcouplerdust boot(monoblockvalvedesign).remotevalvenotstackable;cannotadd asecondsinglerearremote. MT Rearremote#1;Farmall30B/35B(GearorHST) X MT Rearremote#1;Farmall40B/50BHSTonly X MT Rearremote#1;Farmall40B/50BGearonly X Dualrearremotes;3position,selfcentering,leverknobandcouplerdust boot(monoblockvalvedesign).containstwovalves(#1&#2) MT Rearremote#1Farmall30B/35B(GearorHST) X MT Rearremote#1Farmall40B/50BHSTonly X MT Rearremote#1Farmall40B/50BGearonly X OtherHydraulics MT Draftcontrolforgearunits X X PTOGROUP MT MidPTO;2,000RPM X MT MidPTO;2,000RPM X 99 of 114 December 2014

109 PARTSDIVISIONSUPPLIEDACCESSORIESFARMALLBSERIESTRACTORS Part# Description Farmall30B/35B Farmall40B/50B WEIGHTGROUP (Note:attachinghardwareisavailablefromServiceParts) Frontendweight60lbs.Compatiblewithgrilleguard X X butnotcompatiblewithloader. Maximum5weightspertractor.Requiresfrontweight carrier# ifusingmorethan2weights Frontendweight100lbs.Compatiblewithgrilleguard X X butnotcompatiblewithloader. Maximum3weightspertractor.Requiresfrontweight carrier# Rearcounterweightbracket X X Frontweightcarrier(maxfive60lb.weights) X X (notcompatiblewithloader) WheelWeight(105lb'seach)for420/7024INDtires& X wheels2maxperwheel/4maxpertractor MiscellaneousGroup GrilleGuard X GrilleGuard X MT Righthandsidestep X X MT Righthandgrip/grabhandle(replacesstd.tray&cupholder X X MT pinconnector X MT pinconnector X Toolboxbracket(requirestoolbox ) X Toolboxbracket(requirestoolbox ) X Toolbox(Black) X X EnginecoolantheaterMitsubishiengine X EnginecoolantheaterLSengine X F Linkagedrawbar(FONNC830AAstaykitrequired) X X FONNC830AA Linkagedrawbarstaykit X X ROPSmountedworklightkit X X Frenchoperatorsmanual/decalkit(DMC ) X Frenchoperatorsmanual/decalkit(DMC ) X 100 of 114 December 2014