Type 4502A... torque sensors operate on the strain gage principle and supply an

Transcription

1 R PPT Smart (integral measuring electronics) nterference resistance due to active torque output (±5 V), electrically isolated from supply and measuring signal on-contact signal transfer Unipolar supply ighly responsive to dynamic peaks aintenance-free Standardized mechanical connections: 1/4" hex socket 3126 Square socket (size depending on measuring ) ylindrical shaft ends xtremely compact Suitable for pulse tool operation ptional rotational angle measurement SRPT torque sensors operate on the strain gage principle and supply an analog output signal of ± V which is contactless transferred. vailable also with integrated rotational angle/speed measurement. brand of SPR System. _R5 17 Page 1/10

2 R Technical ata echanical asicata easuring ±0, Rated torque nom 0, verload capacity Service torque 1,5 x nom imiting torque 1,5 x nom Rotational angle/- speed measurem. pulses/ 2x360, (Version Q,, R, RU) revolut. 90 displaced, TT ominal speed 18 1/min /min /min 7000 Version Q,, R, RU 1/min 7000 (rotational angle measurement) ousing material nodizedaluminum Protection class P40 General lectrical Specifications ut-off frequency 3d kz 3 ccuracy class 0,2 inearity error including hysteresis % S <±0,2 utput signal V ± at rated torque (rated value) V 5 oad resistance kω >10 Temp. influence on the zero point % S/ <±0,015 Temp. influence on the nominal value % S/ <±0,015 ontrol signal % 100±0,2 100 % control input V "n" "ff" perating temperature (Rated temperature ) Service temperature Storage temperaure lectrical connection 12 pin built-in connector Supply voltage V Power consuption W <1 brand of SPR System. _R5 17 Page 2/10

3 R imensions Torque sensor with standard square socket connection Version Q With rotating shaft rive - square socket utput - square drive = easuring end G 4x6 (6x) 4x6 (3x) Version Q, Version Q, Table Version Q Threads for mounting: 4, 6 mm depth easuring Square size G ø ø xial Q 6 1/4" , Q 12 1/4" , Q 18 1/4" , Q 25 3/8" 74, * Q 50 3/8" 74, * Q 63 3/8" 74, * Q 100 1/2" ,5 * Q 150 1/2" ,5 * Q 160 1/2" ,5 * Q 250 3/4" * Q 300 3/4" * Q 500 3/4" * k0Q " ,5 34,5 * 5 28, , _ e m/rad ngle of twist nom nertia easuring end rive end Q Q ,55 0,0121 0,0157 0, Q ,85 0,0121 0,0157 0, Q Q ,32 0,043 0,0843 0, Q ,4 0,043 0,0843 0, Q ,48 0,051 0,086 0, Q ,61 0,051 0,086 0, Q ,65 0,051 0,086 0, Q ,21 0,465 0,758 0, Q ,25 0,465 0,758 0, Q ,4 0,465 0,758 0, k0Q ,31 1,38 2,05 1,57 Page 3/ mail : contact@celians.com Siège social : Plein entre, llée du Quercy RS - Tél. : +33(0) ax : +33(0) Production SV : 85 avenue du Portugal, lbasub, TU - Tél. : +33(0) ax : +33(0) ommercial et R& : 1 rue harles eauvais, U - Tél. : +33(0) brand of SPR System. _R5 17 Page 3/10

4 R imensions Torque sensor with standard square socket connection Version Q With rotating shaft rive - inside square socket utput - external square drive Rotational angle measurement = easuring end G 4x6 (6x) G K Version Q, Version Q, Table Version Q (with rotational angle measurement) Threads for mounting: 4, 6 mm depth easuring Square size G K ø ø xial Q 12 1/4" , Q 18 1/4" , Q 50 3/8" , Q 63 3/8" , Q 100 1/2" , Q 150 1/2" , Q 160 1/2" , Q 250 3/4" Q 300 3/4" Q 500 3/4" k0Q " ,5 57, _ e m/rad ngle of twist nom nertia easuring end rive end Q ,55 0,013 0,0157 0, Q ,85 0,013 0,0157 0, Q ,47 0,055 0,11 0, Q ,59 0,055 0,11 0, Q ,6 0,069 0,1 0, Q ,85 0,069 0,1 0, Q ,9 0,069 0,1 0, Q ,23 0,68 1,0 1, Q ,27 0,68 1,0 1, Q ,45 0,68 1,0 1, k0Q ,45 2,45 3,25 2, mail : contact@celians.com Siège social : Plein entre, llée du Quercy RS - Tél. : +33(0) ax : +33(0) Production SV : 85 avenue du Portugal, lbasub, TU - Tél. : +33(0) ax : +33(0) ommercial et R& : 1 rue harles eauvais, U - Tél. : +33(0) brand of SPR System. _R5 17 Page 4/10

5 R imensions = easuring end Torque sensor with standard 1/4" hex 3126 form /, Version or With rotating shaft rive - hex shaft utput - hex socket Rotational angle measurement (Version ) Quick action chuck 5 8 4x6 (6x) 1/4" Version /, 0, /4" Table Version or (with rotational angle measurement) easuring Threads for mounting: 6x 4, 6 mm depth xial 45020,5,... 0, , , , , m/rad ngle of twist nom nertia easuring end rive end 45020,5, ,16 0,0134 0,0193 0, , ,32 0,0134 0,0193 0, , ,44 0,0135 0,0194 0, , ,68 0,0137 0,0216 0, , ,0 0,0140 0,0248 0, , ,5 0,0140 0,0248 0,21 brand of SPR System. _R5 17 Page 5/10

6 R imensions = easuring end Torque sensor withshaftend, Version R or R With rotating shaft Rotational angle measurement (Version R) G 4x6 (6x) Version R/R, x6 (3x) G 4x6 (8x) 22 Version R, and K Version R, 20 and Table Version R or R (with rotational angle measurement) Threads for mounting: 4, 6 mm depth eas. ** With feather keyways (2x180 ) according to 6885 xial ø 1 K G g R,...R , shaft R,...R , shaft R,...R , shaft R,...R , shaft R , K** R , K** R K** R K** _ e m/rad ngle of twist nom nertia easuring end rive end R,...R 317 0,17 0,0146 0,0147 0, R,...R 317 0,36 0,0146 0,0147 0, R,...R 855 0,34 0,015 0,015 0, R,...R 855 0,67 0,015 0,015 0, R ,21 0,061 0,073 0, R ,3 0,062 0,075 0, R ,21 0,9 1,02 0, R ,35 0,91 1,04 0, mail : contact@celians.com Siège social : Plein entre, llée du Quercy RS - Tél. : +33(0) ax : +33(0) Production SV : 85 avenue du Portugal, lbasub, TU - Tél. : +33(0) ax : +33(0) ommercial et R& : 1 rue harles eauvais, U - Tél. : +33(0) brand of SPR System. _R5 17 Page 6/10

7 R imensions Torque sensor withshaftendand separate mounting base, Version R With rotating shaft Rotational angle measurement Shaft ends each with two keyways in accordance with X W U Y T V = easuring end ØG J K ØG Z P Q Table Version R (with rotational angle measurement) easuring øg J K P g R , , R , , R , k0R , ption mounting base easuring xial Q T U V W X Y Z P9 P R x R x R x k0R x easuring m/rad ngle of twist nom nertia Weight mounting base kg easuring end rive end R ,2 0,665 0,605 1,13 1, R ,25 0,68 0,62 1,13 1, R ,22 3,2 2,63 2,84 1, k0R ,33 3,21 2,67 2,84 1,23 brand of SPR System. _R5 17 Page 7/10

8 R imensions Torque sensor with shaft end and integral mounting base, Version RU This version can be used as functional check on tilt procedure or rotation monitoring Variable mounting positions, applications for left and right hand torque readings as well as the static and dynamic conditions are possible ll RU type sensors have an integrated rotational angle measurement Ø 14 J 21 = easuring end J Ø 10 P9 Table Version RU (with rotational angle measurement) easuring xial ø J Size g RU RU RU RU RU RU easuring m/rad ngle of twist nom nertia easuring end rive end RU ,17 0,0146 0,0147 0, RU ,36 0,0146 0,0147 0, RU ,34 0,015 0,015 0, RU ,67 0,015 0,015 0, RU ,25 0,062 0,061 0, RU ,35 0,064 0,063 0,78 brand of SPR System. _R5 17 Page 8/10

9 R lectrical onnections Pinllocationof the12pinuilt-inonnector unction P escription Supply +U V, power consumption <1 W G Ground relating to U and angle of rotation pulses Shield n sensor connected to housing U ±5 V at nom at >2 kω Torque output 5 V at control signal activation Ri, = 10 Ω, output short circuit proof relating to G G Ground relating to U ngle of rotation sensor Supply +U 5 V ngle of rotation pulses Track pen collector output nternal 1 kω resistance to 5 V (pull up), TT-level G Track s Track, 90 displaced 100 % control input K ontrol ff: V n: V KG Ground relating to control input J otconnected brand of SPR System. _R5 17 Page 9/10

10 R ncluded ccessories one rdering Key 4502 ptional ccessories /rt. o. ounting base, for Version R KS s ounting base, for Version R KS s emale connector with solder eye 12 pin KS onnection cable, 5 m, 12 pin open ends KS onnection cable, 2,5 m, 12 pin oo Torque KS ,5 mplifier for strain gage sensors ndividual pplication The diverse model guarantees user-friendly application such as tool calibration or in test stands with or without mounting base. easuring Ranges in/ Possible Versions 0,5 0,5 1 R R RU R R RU R R RU R R RU Q Q Q Q R R RU Q Q R R RU Q Q Q Q R Q Q Q Q R Q Q Q Q Q Q R Q Q R 1k0 ouplings , or pplication xample Power tool control Versions (ote ependence with easuring Range) Square socket Q Square socket with rotational angle meas. Q 1/4" hex socket 1/4" hex socket with rotational angle meas. Rotating shaft R Rotating shaft with rotational angle meas. R Rotating shaft with rotational angle meas. RU and integral mounting base rderexample: _ e Torque sensor:rated torque 18 :018, Version :1/4" hex socket with angle measurement Page 10/8 brand of SPR System. _R5 17 Page 10/10