PRO Power Tools. Industry and Maintenance

Transcription

1 PRO Power Tools Industry and Maintenance

2

3 Contents Impact wrenches 6 Ratchet wrenches 16 Battery tools 22 Screwdrivers 28 Drills 34 angle and Vertical grinders 40 Die grinders 46 Sanding & Polishing 52 Percussive tools 62 Vibration and Sound values 72 3

4 How to use our tools safely Some safety tips Below are few tips to increase power tool safety and help avoid injury and accidents. These tips, however, are no substitute for the PRO tools safety and instruction manuals. Conduct a visual inspection of the tool before use Check the tool, including hoses or fittings, for signs of damage and replace defect parts if necessary. Check for cracks in the sockets, grinding wheels, chisels, etc., and replace damaged parts if required. Check the free speed of the tool Make sure the measured speed at a pressure of 6.3 bar does not exceed the rated speed of the tool. Before checking the measured speed, always remove wheels, burrs, sockets, etc. Use the right accessories Always use the accessories recoended in the safety manual. Never use hand sockets with impact or ratchet wrenches. Never use a grinding wheel, burr, cone wheel, etc., marked with a speed lower than the speed of the grinder. Always disconnect the air tool before changing accessories. Wear safety gear Always use appropriate safety equipment, such as googles and earplugs. When required, wear gloves, apron and helmet. When working with materials that produce airborne particles, be sure to wear a dust mask or similar protective gear and use other equipment, such as dust extractors, to control exposure to harmful substances. Before grinding, test the tool Test run the grinder in a protected area before starting work and after changing the wheel. Make sure that the space around is free from other people. Maintain a safe work area Keep other people at a safe distance away from your workspace while you use the tools. Beware of hoses on the walking or work surface. Always direct exhaust air away from yourself and others. Never use an air tool in explosive atmospheres. Stay away from electric wiring because an air tool is not insulated for contact with electrical power sources. After work Always disconnect your air tool after use. Safe hand tool operation is a fundamental tenet of PRO tool design. All of our tools have features that safeguard operators against work-related injuries and machine-related hazards. But the best way to ensure hand tool safety is to ensure that operators use the recoended safety practices. That is why each PRO tool comes with a safety and instruction manual that operators should read and follow when using our tools. For a copy of these manuals, contact your local PRO representative. For more information on safe power tool operation, please refer to the rules for tool safety from these two organizations: Safety Code for Portable Air Tools, ANSI B186.1 American National Standards Institute (ANSI) 11 W. 42nd St, 13th floor, New York, NY Further occupational health and safety information can be obtained from the following web sites: (USA) (Europe) 4

5 Tools for professionals Tools for professionals Some years ago, we took the high quality die-cast moulds used to manufacture industrial tools for production lines and produced the pro rang of hand-held tools for light industry users. The tools were an iediate success and we continuously expanded the range with tools that demanding industrial users need to get the job done. We also added extras to make life easier for industry, including the best industry warranties, fast service and unmatched technical support. The popular choice for professionals! Features and benefits Design Robust Quality Power Warranty Attractive, comfortable to hold, very portable. Sturdy material, solid design, excellent performer. PRO keeps on working and gets results. PRO comes with a long list of best-in-class features. The work gets done in record time. It s easy to handle tough jobs with PRO. The best assurance of quality and performance is a generous warranty. 5

6 6

7 Impact Wrenches 7

8 Power and durability! If you are looking for a superior impact wrench, you ve come to the right place! Light, compact and built for speed and comfort, PRO impact wrenches help you get the job done quickly and with minimum effort. The PRO range offers a wide selection of wrenches to meet all needs. PRO impact wrenches are ideal for automotive repair, heavy equipment maintenance, product assembly, major construction projects, or any other application requiring high torque output. PRO Compact - best power-to-weight ratio PRO Compact are lightweight tools with composite housings. Perfect for tackling the toughest industrial jobs, PRO Compact impact wrenches deliver the best power-to-weight ratio within the PRO range. Powered by an advanced twin-haer mechanism, these compact impacts deliver excellent performance. State-of-theart vibration damping and noise reduction technology make them easy to work with all day long. PRO explosion-proof models PRO Compact XP tools meet stringent European standards and comply with atex Directive I M2 II 2G IIB T4 II2D 135. These explosion-proof products are designed for use in hazardous environments, such as coal mines, petrochemical plants, or wherever a spark-reduced safety tool is required. Whatever the job, you can rely on PRO impact wrenches to get it done smoothly and easily. 8

9 Twin haer impact mechanism for fast run down Robust fiber glass reinforced composite housing Important motor parts made of steel instead of aluminum for longer life time Three torque settings forward Thumb reverse lever and torque setting integrated with the trigger for easy operation with one hand Ergonomic rubber grip on handle for insulation and comfort Selection guide Impact & ratchet wrenches recoended torque range Nm 3640 M M M M M M M M M M14 81 M12 47 M10 24 M8 5.7/9.8 M5/M6 S2480 W2110 W2210 W2216 W2219 W2220 S2481 W2111 W2211 W2815 W2820 W2225C W2610 W2620 W2810 B2715 W2820LA W2226 W2611 W2621 W2811 W2227 W2630 W2228 W2631 B2708 B2710 Excellent Good 9

10 Impact Wrenches Compact line W2810/W2811 W2815 W2820/ W2820LA Bolt Square drive in Max torque fwd Nm Recoended torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. W2810 M14 3/ , / W2811 M14 1/ , / W2815 M16 1/2 1, , / W2815-Pin retainer M16 1/2 1, , / W2820 M22 3/4 1, , / W2820LA M22 3/4 1, , / Power socket kits PRO WS1001 PRO WS1002 PRO WS1003 Square Number drive in Socket type of sockets Sockets included Ordering No. PRO WS1001 3/8 Metric impact socket 13 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, PRO WS1002 1/2 Metric impact socket 14 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26, PRO WS1003 1/2 Metric deep impact socket 14 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26,

11 Impact Wrenches Optional accessories W2810 W2811 W2815 W2815-Pin retainer W2820 W2820LA Suspension yoke Protective cover Anvils * * * * Standard Ring retainer Through hole and ring retainer * Pin retainer Quick change * 6" Through hole and ring retainer * Included with tool 11

12 Impact Wrenches Capacity M5 M22 S2480/S2481 W2110/W2111 W2210A/W2211 W2216 W2216 KIT W2219 Bolt Square drive in Max torque fwd Nm Recoended torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. S2480 M5 1/4 HEX QC , / S2481 M6 1/4 HEX QC , / W2110 M12 1/4 HEX QC , / W2111 M12 3/ , / W2210A M14 3/ , / W2211 M14 1/ , / W2216 M16 1/ , / W2216 KIT* M16 1/ , / W2219 M22 3/4 1, , / * Sockets included 13, 15, 17, 19,

13 Impact Wrenches Explosion proof W2315XP W2320XP Bolt Square drive in Max torque fwd Nm Recoended torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. W2315XP M16 1/ , / W2320XP M22 3/4 1, , / Optional accessories Protective cover W Anvils * Standard Ring retainer 13

14 Impact Wrenches Capacity M22 M36 W2220/ W2226C W2227 W2225C W2228 Bolt Square drive in Max torque fwd Nm Recoended torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. W2220 M30 3/4 1, ,200 3, / W2226C M30 1 1, ,200 3, / W2227 M30 1 1, ,200 5, / W2225C M36 1 2, ,500 4, / W2228 M36 1 2, ,500 4, /

15 Impact Wrenches Optional accessories Anvils W2220 W2226 W2227 W2225C W Standard Ring retainer * * * * Through hole and ring retainer ** ** 6" Pin retainer " Through hole and ring retainer * Included with tool ** Lenght 5 5/8 15

16 16

17 Ratchet Wrenches 17

18 Compact and powerful! Powerful, reversible and durable, PRO high performance ratchet wrenches are designed for easy access in confined spaces and a long working lifetime. Most important of all, they are designed with the operator in mind. The PRO range offers a wide selection of wrenches to meet all needs. PRO ratchet wrenches are ideal for automotive repair, heavy equipment maintenance, product assembly, major construction projects, or any other application requiring high torque output. PRO compact line ratchet wrenches Each tool has a unique composite housing that provides improved ergonomics, reduced vibrations and higher powerto-weight ratio. The variable, feather-touch trigger puts you in full control and switching from forward to reverse couldn t be simpler. The finishing touches are an air exhaust that swivels through 360 to direct the air away from you and a rubber grip that provides both insulation and comfort. Whatever the job, you can rely on the PRO ratchet wrenches to get it done smoothly and easily. 18

19 Great power-to-weight ratio Robust composite housing Rubber grip on handle for insulation and comfort Easy switch between forward and reverse +360 degrees adjustable air exhaust Selection guide Impact & ratchet wrenches recoended torque range Nm 3640 M M M M M M M M M M14 81 M12 47 M10 24 M8 5.7/9.8 M5/M6 S2480 W2110 W2210 W2216 W2219 W2220 S2481 W2111 W2211 W2815 W2820 W2225C W2610 W2620 W2810 B2715 W2820LA W2226 W2611 W2621 W2811 W2227 W2630 W2228 W2631 B2708 B2710 Excellent Good 19

20 Ratchet Wrenches M22 M36 W2610/W2611 W2620/W2621 W2630/W2631 Bolt Square drive in Torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. W2610 M8 3/ / W2611 M8 1/ / W2620 M12 1/ / W2621 M12 3/ / W2630 M14 1/ / W2631 M14 3/ /

21 Ratchet Wrenches Socket kits PRO WS1001 PRO WS1002 PRO WS1003 Square Number drive Socket type of sockets Sockets included Ordering No. PRO WS1001 3/8 Metric impact socket 13 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, PRO WS1002 1/2 Metric impact socket 14 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26, PRO WS1003 1/2 Metric deep impact socket 14 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26,

22 22

23 Battery Tools 23

24 Power and mobility! It pays to choose PRO battery tools. Although deceptively light, well-balanced and comfortable to work with, they are built for durability, and ready to take on the toughest jobs. All tools have an impact mechanism for fast rundown and maximum torque. The PRO range offers a wide selection of wrenches to meet all needs. PRO battery wrenches are ideal for automotive repair, heavy equipment maintenance, product assembly, major construction projects, or any other application requiring high torque output. Latest battery technology PRO battery tools feature the latest Li-Ion battery technology. This ensures long working cycles throughout the charge and excellent power-to-weight ratios. The tools come with a universal charger that works with both 10.8V and 18V batteries, and offers fast, easy battery connection. Battery packs are rubber coated to protect the battery and not damage the work surface. The tools are delivered in complete kits including, tool, 2 batteries, charger, cable and carrying case. Whatever the job, you can rely on the PRO ratchet wrenches to get it done smoothly and easily. 24

25 Lightweight One hand forward and reverse Efficient motor with low electric consumption 2.95 kg Universal charger Easy and quick connect battery Power indicators Li-lon battery for more power and longer cycles Replacable carbon brushes Great power to weight ratio 575 Nm Rubber coated handle Well balanced Two batteries included SONY battery Selection guide Impact & ratchet wrenches recoended torque range Nm 3640 M M M M M M M M M M14 81 M12 47 M10 24 M8 5.7/9.8 M5/M6 S2480 W2110 W2210 W2216 W2219 W2220 S2481 W2111 W2211 W2815 W2820 W2225C W2610 W2620 W2810 B2715 W2820LA W2226 W2611 W2621 W2811 W2227 W2630 W2228 W2631 B2708 B2710 Excellent Good 25

26 Battery Tools Ratchet wrench Screwdriver B2704 B2708 Impact wrench B2710 B2715 Bolt Square drive in Max torque fwd Nm Recoended torque range Nm Free speed r/min Weight kg Length Voltage V Amp. hours No. of batteries included Charge time hours Ordering No. B2704 M12 1/ B2708 M14 1/4 HEX QC , B2710 M14 3/ , B2715 M16 1/ ,

27 Battery Tools Worklight Bulb type Brightness 10 cm Weight Length Ordering No. PRO B110 WORK LIGHT LED 16 pcs 10,000 LUX 0.29 kg Battery not included. Works with both 10.8V and 18V batteries. PRO B110 WORK LIGHT Accessories Battery Ordering No. B V B2708, B V Li-Ion B V Charger Ordering No. B B2708, B2710, B Socket kits PRO WS1001 PRO WS1002 PRO WS1003 Square Number drive in Socket type of sockets Sockets included Ordering No. PRO WS1001 3/8 Metric impact socket 13 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, PRO WS1002 1/2 Metric impact socket 14 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26, PRO WS1003 1/2 Metric deep impact socket 14 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 26,

28 28

29 Screwdrivers 29

30 Speed and precision! For unmatched fastening performance, PRO screwdrivers are the obvious choice. These versatile, highly engineered tools meet and surpass today s demands for performance in terms of speed, precision and durability. Add well balanced designs that contribute to good ergonomics, and PRO screwdrivers take your productivity to a whole new level. Whatever your application one of our four different clutch types will be the ideal match for the job. PRO Impact Drive Screwdrivers Ideal for fast assembly and disassembly, a double-haer mechanism really gets the job done. These lightweight tools offer a productive blend of operator comfort and exceptional performance. There are two models both are reversible with a simple flip-off lever on the side of the tool shaft. PRO Direct Drive Screwdrivers Our direct-drive models stall when they reach maximum torque and are well suited for self-tapping screws and wood screws. PRO Slip-Clutch Screwdrivers Our slip-clutch screwdrivers provide an implied pulsating force, or slip, once you reach the desired torque. Features include adjustable torque settings, trigger and push start for pistol grips, and lever and push start for straight models. They are suitable for soft joints or for use with sheet metal screws, wood screws or self-tapping screws where the torque level may peak temporarily during the homing phase. PRO Shut-off Screwdrivers If it s high torque accuracy you are looking for, these are the tools for you! Our fast shut-off models deliver the smooth performance and high quality tightening you need. 30

31 Slip-clutch for torque control. Once the desired torque is reached the coupling slips Well balanced and ergonomic Soft-start trigger for smooth operation +360 degrees adjustable air exhaust Silent Selection guide Type Machine screw 4.8 Machine screw 8.8 Thread forming screw-m Thread forming screw-st Thread forming screw-st plastic Self drilling screw-s Wood screw Impact clutch Direct drive Slip clutch Shut-off clutch Recoended OK Not recoended 31

32 Screwdrivers Impact drive S2480/S2481 Screw Torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. S2480 M , / S2481 M , / Direct drive S2305/S2326 Screw Torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. S2305 M / S2326 M , / Slip-clutch S2308-C/S2309-C/S2310-C Screw Torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. S2308-C M / S2309-C M , / S2310-C M /

33 Screwdrivers Slip-clutch S2340-C/S2360-C/S2370-C Screw Torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. S2340-C M , / S2360-C M4 M / S2370-C M , / Shut-off S2450-P/S2451-P/S2452-P Screw Torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. S2450-P M , / S2451-P M / S2452-P M / Shut-off S2416-L/S2426-L/S2428-L Screw Torque range Nm Free speed r/min Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. S2416-L M , / S2426-L M , / S2428-L M /

34 34

35 Drills 35

36 Superior hole quality! PRO drills are robust, high-performance, user-friendly tools that you can rely on to deliver superior hole quality in your most demanding applications. Designed with operator comfort in mind, PRO drills offer speed, power, accuracy and smooth, virtually silent operation. They also feature an ergonomically designed handle, and air exhaust through the handle. A PRO drill for every job PRO pistol drills are suitable for most drilling operations. PRO 90 degree angle drills are convenient for drilling operations in confined spaces. PRO straight drills are primarily designed for vertical drilling operations and for drilling in cramped spaces. 36

37 Well balanced and ergonomic High spindle accuracy Soft-start throttle Silent Air exhaust through handle Oil-free Available with key or quick chuck Selection guide r/min Mild steel m/min Alloy steel 5 15 m/min Cast iron m/min Aluminum and bronze m/min Wood and board m/min Composite m/ min D2112 5, a Drill dim. / D2116/D2160 2, a a - D2163 2, a a - D D2148-R a) Drill larger than standard chuck capacity. 37

38 Drills Pistol Grip D2112/D2116 D2112Q/D2116Q Chuck capacity Length incl chuck Air consumption l/s Rec. Hose Air inlet thread in Free speed Weight Power Chuck r/min kg W type Ordering No. D2112 5, /4 350 Key D2112Q 5, /4 350 Quick change D2116 2, /4 350 Key D2116Q 2, /4 350 Quick change D2121 D2121Q D2148-R D2148-RQ Chuck capacity Length incl chuck Air consumption l/s Rec. Hose Air inlet thread in Free speed Weight Power Chuck r/min kg W type Ordering No. D /4 340 Key D2121Q /4 340 Quick change D2148-R /4 250 Key D2148-RQ /4 250 Quick change Straight Drill D2160 D2160Q Chuck capacity Length incl chuck Air consumption l/s Rec. Hose Air inlet thread in Free speed Weight Power Chuck r/min kg W type Ordering No. D2160 2, /4 460 Key D2160-Q 2, /4 460 Quick change

39 Drills Pistol Grip D2163 D2163Q Free speed r/min Chuck capacity Weight kg Length incl chuck Height incl chuck Air consumption l/s Rec. Hose Air inlet thread in Power W Chuck type Ordering No. D2163 2, /4 330 Key D2163-Q 2, /4 330 Quick change Optional accessories for model D2163/D2160 Ordering No. Exhaust air hose Support handle Optional accessories for all drills Key chucks, key included, mount 3/8-24 UNF Ordering No Chuck capacity (standard with D2112) Chuck capacity (standard with D2116, D2163) Chuck capacity (standard with D2121, D2148-R) Keyless chuck (standard with D2112Q, D2116Q) Keyless chuck (standard with D2121Q, D2148-RQ) Quick-change chuck for 1/4 bits mount 3/8-24 UNF Drill depth stop Drill depth stop to be used with support handle Use in/for 2112/16/21, exhaust air hose R Exhaust air hose (D2112, D2116, D2121)

40 40

41 Angle and Vertical Grinders 41

42 Get more done in less time! With a powerful grinder from the Atlas Copco PRO range you will remove more material and get the job done in less time. PRO grinders are a popular choice for high quality finishing and general surface preparation. They are durable, lightweight tools, that deliver all the power you need, yet easy to handle. All grinders, except the G2408-series, have built-in speed governors running the grinding disc at optimal speed. Angle grinders For rough grinding as well as general adjustment grinding, weld preparations and light cleaning of castings the angle grinder is the best choice. With its small and high power the angle grinder makes the job easy. Angle grinders with power output from 350 to 1,300 W are available in the PRO range. The tools are equipped with speed governors and overspeed shut-off when needed. Vertical grinders The rigid design with a vertically standing air motor and nodular cast iron cylinder gives impressively long service life and durability. The nodular cast iron has a lubricating effect, which prolongs the intervals between service. The vertical grinders are suitable for very rough grinding and cutting off operations on open surfaces. 42

43 Great power-to-weight ratio Speed governor for optimal grinding speed Rubber grip on handle for insulation and comfort Safety start lever and over-speed shut-off device Adjustable wheel guard 43

44 Angle and Vertical Grinders Angle grinder 350 W Angle grinder 800 W G /-115/-125 G /-115/-125 Max free speed r/min Max wheel diameter Spindle thread Power W Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. G , /8-24 UNF / G , /8-24 UNF / G , /8-24 UNF / G , /8-24 UNF / G , M / G , M / Angle grinder 1,300 W G2515 Max free speed r/min Max wheel diameter Spindle thread Power W Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. G2515 8, /8 UNC / Exhaust air hoses Vibration damped handle Ordering No. G G Adpater Ordering No. UNF 3/8-24 x M Ordering No. G G

45 Angle and Vertical Grinders Vertical grinder W Vertical grinder 900 W G2415 G2416 Max free speed r/min Max wheel diameter Max cup wheel diameter Max wire brush diameter Spindle thread Power W Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. G2415 8, /8-11 UNC 1, / G2416 6, /8-11 UNC / Accessories Included for G2415, G2416 Ordering No. Optional for G2415, G2416 Ordering No. Optional for G2416 Ordering No. Attachment set forreinforced cut-off wheel soft pad with spanner and lock nut Attachment set for steel wire brush Ø Attachment set fordepressed center wheel stiff pad with spanner and lock nut Steel wire brush Ø Attachment set for steel wire brush Ø Steel wire brush Ø

46 46

47 Die Grinders 47

48 Get more done in less time! With a powerful die grinder from the Atlas Copco PRO range you will remove more material and get the job done in less time. PRO grinders are a popular choice for high quality finishing and general surface preparation. They are durable, lightweight tools, that deliver all the power you need, yet easy to handle. The G2414/G2422-series, have built-in speed governors running the burr at optimal speed. Die grinders Check out the smooth operation of the G2414 and G2424 series. The tools unique suspension prevents burr chatter and minimizes transfer of vibrations to the operator. The tools are also equipped with speed governors. Low speed die grinder The PRO low speed grinder is powerful and designed with a gear reduction mechanism and speed governor to maintain the power and grinding speed. This light and compact tool is excellent for polishing, grinding and paint removal and can be used with non-woven cloth, brushes, flap wheels and buffs. 48

49 Great power-to-weight ratio Robust aluminum housing with plastic cover Speed governor for optimal grinding speed Safety start lever Unique spindle suspension that prevents burr chatter and minimizes vibration transfer 49

50 Die Grinders Die grinders 350 W/ W G G G2414 S080/S120/S150/S200/S250 G2424 S080/S120/S150/S200/S250 Free speed r/min Power W Weight kg Length Air consumption l/s Rec. hose Air inlet thread in Ordering No. G G ,000 Free speed r/min 20, Power W Weight kg Length 277 Air 10.3con- sumption l/s 10.3 Rec. 10 Hose 10 Air 1/4 inlet thread in 1/ Ordering No. G2414 S080 8, / G2414 S120 12, / G2414 S150 15, / G2414 S200 20, / G2414 S250 25, / G2424 S080 8, / G2424 S120 12, / G2424 S150 15, / G2424 S200 20, / G2424 S250 25, / Optional accessories Collect chuck complete For model G2412, G2414, G2422, G242 Ordering No / /

51 Die Grinders Angle die grinder 255 W G2445 Air consumption l/s Rec. hose Air inlet thread in Free speed Power Weight Length r/min W kg Ordering No. G , / Low speed die grinder 550 W High speed die grinder 80 W G2440 G2451 Air consumption l/s Rec. hose Air inlet thread in Free speed Power Weight Length r/min W kg Ordering No. G2440 4, / Free speed Power Weight Length Air consumption r/min W kg l/s Ordering No. G , ,

52 52

53 Sanders 53

54 For the optimal surface finish! Atlas Copco PRO range tools for sanding and polishing deliver surface finishing at its best. Applications Dry sanding and surface preparation, such as removing handling marks and smoothing down welds on car bodies and other sheet metal objects. Rust and paint removal with fiber discs on sheet metal objects. Sanding and smoothing down the surface on wood, metal and non-ferrous objects and on glass fiber reinforced plastic. Polishing, gridline removal and reducing surface roughness. Angle sanders PRO Angle Sanders are very powerful and light weight. The high power output makes light work of rough surface sanding. The PRO Angle Sanders can be equipped with spot suction kits to reduce the health risk for operators exposed to potentially dangerous particles. Belt sanders PRO Belt Sanders are ideal for precise and efficient sanding of confined areas such as spherical surfaces and tubes which are difficult to access with conventional grinders. They are also the ideal tool for de-burring applications. The head rotation provides a versatile solution for almost any application. Polishing sanders PRO Polishing Sanders are designed to be powerful and robust. Their low overall height allows access to confined spaces. Features include adjustable air exhaust and ergonomic handle design. Orbital sanders PRO Orbital Sanders are ideal for precise and efficient sanding of rough and fine surfaces. The PRO Orbital Sanders are designed to be robust and durable with composite housing and high quality bearings. With orbital diameters 2.5, 5 and 10 as well as different dust suction solutions the range covers virtually every need. 54

55 Great power-to-weight ratio Speed governor for optimal sanding speed Rubber grip on handle for insulation and comfort Safety start lever Spot suction kit available for clean and healthy working environment 55

56 Sanders Angle sanders 800 W G2510 S066/G2510 S085/G2510 S066-M14/G2510 S085-M14 Max free speed r/min Recoended pad Spindle thread Power W Weight kg Length Air consumption l/s Rec. Hose Size Air inlet thread in Ordering No. G2510 S066 6, / / G2510 S066-M14 6, / / G2510 S085 8, M / G2510 S085-M14 8, M / Accessories Accessories G2510 S066/S085/S066-M14/S085-M14 Ordering No. Accessories G2510 S066/S085 (only available with 5/8-11 UNC thread) Ordering No. 125 soft pad with spanner and lock nut Ordering No. G Spot suction kit for 125 disc with G2510 flow chamber, cap, washers, backing pad, nut and spanner soft pad with spanner and lock nut stiff pad with spanner and lock nut Spot suction kit for 180 disc with flow chamber, cap, washers, backing pad, nut and spanner

57 Sanders Belt sanders G2403 G2404 Belt speed m/min Air consumption l/s Rec. Hose Size Air inlet thread in Rotational Belt Power Weight Length r/min dimension W kg Ordering No. G ,000 1,300 10x /4 BSP G ,500 2,540 20x /4 BSP Optional accessories Abrasives Ordering No. Ordering No. for G2403 for G grit grit grit

58 Sanders Pistol sanders W G2302 G2302-KIT G2502 Max free speed r/min Recoended pad Spindle thread Power W Weight kg Length Air consumption l/s Rec. Hose Size Air inlet thread in Ordering No. G , /4-20 UNC /4 BSP G2302-KIT 17, /4-20 UNC /4 BSP G , /16 UNF /4 BSPT Random orbital sanders two hand model G Max free speed r/min Pod Orbit diameter Weight kg Length Air consumption l/s Rec. Hose Air inlet thread in Ordering No. G , /

59 Sanders Random orbital sanders one hand model G N/G N/ G N G C/G C/ G C G I/G I/ G I Max free speed r/min Pad Orbit diameter Power W Weight kg Length Air consumption l/s Rec. Hose Size Air inlet thread in Ordering No. G N 12, /4 BSP G N 12, /4 BSP G N 12, /4 BSP G C 12, /4 BSP G C 12, /4 BSP G C 12, /4 BSP G I 12, /4 BSP G I 12, /4 BSP G I 12, /4 BSP Accessories Pads 150 for G2428 Ordering No. 150 Velcro 6 hole Vinyl 6 hole Velcro no hole Vinyl no hole for G2438 Ordering No. 125 Velcro 5 hole Vinyl 5 hole Velcro no hole Vinyl no hole

60 Sanders Polishing sanders G2406 G2407/G2407 M14 Max free speed r/min Recoended pad Spindle thread Power W Weight kg Length Air consumption l/s Rec. Hose Size Air inlet thread in Ordering No. G2406 2, /8-24 UNF /4 BSP G2407 3, /8-24 UNF /4 BSP G2407 M14 3, M /4 BSP

61 Sanders Accessories for G Velcro pad, thread UNC 5/8. Maximum speed r/min. To be used together with Velcro sponge heads or Velcro lambswool bonnet. Ordering No Lambswool bonnet 150 with Velcro fitting. Maximum speed r/min Velcro sponge head, maximum speed r/min, White, Dense, firm sponge head for compounding 2-pack paint systems. Excellent result with all leading makes of compound and polish Velcro sponge head, maximum speed r/min, White, Dense, firm sponge head for compounding 2-pack paint systems. Excellent result with all leading makes of compound and polish Velcro sponge head, maximum speed r/min, Blue Softer sponge, more open cell, for polishing and compounding of cellulose, acrylics etc Velcro sponge head, maximum speed r/min, Blue Softer sponge, more open cell, for polishing and compounding of cellulose, acrylics etc Velcro sponge head, maximum speed r/min, Pink Ultra soft, particularly good for dark colours Velcro sponge head, maximum speed r/min, Yellow coarse sponge, open cell, for aggressive compounding including oxidized paintwork Accessories for G2406 and G2407 Ordering No. 150 white sponge head pad, thread UNC 5/8. Maximum speed r/min blue sponge head pad, thread UNC 5/8. Maximum speed r/min soft plastic UNC 5/8 and spanner. Maximum speed r/min UNF 3/8-24 x M14 Spindle thread adaptor. (To be used with M14 threaded pads.) Exhaust air hose

62 62

63 Percussive Tools 63

64 We have an ergonomic solution Atlas Copco proudly presents the PRO range of low vibration needle and chisel scalers. The incredibly low vibration levels of these tools enable operators to run them safely for long periods, without loss of efficiency. Choose an inline or pistol grip configuration according to your needs. Industry leading vibration levels The low vibration scalers reduce vibration-related injuries at the workplace. They allow operators to run a tool for extended periods without frequent breaks due to tool vibration. This adds up to significant cost savings for your production operation. Putting the operator first Lower vibration levels in the workplace contribute to operator safety and well-being. High vibration levels lead to Hand Arm Vibration Syndrome (HAVS). For example this can lead to loss of sensation in the fingertips. Tool operators exposed to high vibration levels can experience long-term injuries that may ultimately prevent them from working. 265 MIN 15 MIN Tool flexibility The modular designs of tools in the PRO scaler range enable tool configuration to be changed according to the working conditions. Interchangeable tool modules enable an inline tool to be converted to a pistol grip version, or a needle scaler to be changed to a chisel output, simply and quickly. The result is that fewer tools are needed and there is greater flexibility in the workplace. PRO low vibration scalers are ideal for the removal of coatings, corrosion, and weld slag. Comfortable to operate, these highly effective tools make light work of the most difficult surfaces. Believe it or not Atlas Copco s P2540 gives you 260 minutes of trigger time before you reach maximum recoended exposure! With an average undamped pistol needle scaler, you will get just 15 minutes before you reach maximum exposure. (Calculation based on 3.4 m/s 2 for the P2540 and 14 m/s 2 for the average undamped tool. For further information see Needle/chisel scalers in the Atlas Copco range give you high performance with lower vibration levels. These ergonomically designed tools have low maintenance requirements and modular components for added flexibility. Atlas Copco tools are well known for their quality and innovative features. Our PRO scalers easily live up to this reputation. 64

65 No additional tools required for changing needles. Lightweight tool, offering one-handed operation. Low vibration improves operator control and reduces risk of vibration-related injuries. Low vibration, heavy duty design. Flexibility: Atlas Copco needle scalers convert to chisel scalers in seconds. Low vibration needle and chisel scalers can be fitted with vacuum shrouded front tubes to control dust where necessary. In-line body Dust shroud Needle module Pistol unit Pistol grip body Dust shroud Chisel module 65

66 Percussive Tools Engraving pen Weld flux chipper P2505 P2520 Air consumption l/s Rec. Hose Blows Length Weight Air inlet thread Hz kg in Ordering No. P / /8 BSP Chisel shank in Blows Hz Stroke Length Weight kg Air consumption l/s Rec. Hose Air inlet thread in Ordering No. P / /4 BSPT Needle scalers Scalers P2540 P2541 P2550 P2551 Blows Stroke Length Weight Air consumption Rec. hose Air inlet Ordering Hz kg l/s thread in No. P /4 BSP P /4 BSP Chisel shank in Blows Hz Stroke Length Weight kg Air consumption l/s Rec. hose Size Air inlet thread in Ordering No. P / /4 BSP P / /4 BSP

67 Percussive Tools Accessories Ordering No. P2505 Needle and small parts kit Chisels Chisel Designation Shank type length Blade width Example application Ordering No. Flat chisel Square Weld splatter removal Wide flat chisel Square Removal of peeling paint and rust Flat chisel Square Weld splatter and sand cast cleaning Wide flux chisel Square Weld flux removal Needles Modules* Designation Set of 19 needles Length Ordering No. Steel standard Stainless steel, flat ends Beryllium copper flat ends Designation Ordering No. Dust shroud Inline body Pistol grip body Chisel module Needle Module *See illustrations below In-line body Dust shroud Needle module Pistol unit Pistol grip body Dust shroud Chisel module 67

68 Percussive Tools Chipping haers P2530-H P2531-H P2535-H P2536-H P2539-H Chisel shank Blows Hz Stroke Length Weight kg Air consumption l/s Rec. Hose Air inlet thread in Ordering No. P2530-H /4 BSPT P2531-H /4 BSPT P2535-H /4 BSPT P2536-H /8 BSPT P2539-H /8 BSPT Riveting haers P2530-R P2531-R P2535-R P2536-R Air consumption l/s Rec. Hose Air inlet thread in Shank Blows Stroke Length Weight Hz kg Ordering No. P2530-R /4 BSPT P2531-R /4 BSPT P2535-R /4 BSPT P2536-R /8 BSPT

69 Accessories Designation Width Length For Tool Ordering No. Chisel blank P2515A P P P Flat chisel P2515A P P Wide flat chisel P2515A Sharp chisel P P P Spot weld chisel P P Angle scraper chisel P P P2515A Moil point chisel P P Pipe cutting chisel P P P Plate cutting chisel P P Plate cutting chisel P P

70 Accessories Designation Width Length For Tool Ordering No. Flat chisel P2550/ Wide flat chisel P2550/ Flat chisel P2550/ Weld flux chisel 35 cranked 178 P2550/ Chisel blank P2520, P2521, P P2520, P2521, P P2520, P2521, P2522 Flat chisel P2520, P2521, P P2520, P2521, P P2520, P2521, P2522 Flux chisel P2520, P2521, P P2520, P2521, P P2520, P2521, P2522 Plate cutting chisel P2530-R, P2531-R P2530-H, P2531-H Double edge plate cutting chisel P2530-R, P2531-R P2530-H, P2531-H Flat chisel P2530-R, P2531-R P2530-H, P2531-H Point chisel P2530-R, P2531-R P2530-H, P2531-H Rivet cutter P2530-R, P2531-R P2530-H, P2531-H Chisel blank P2530-R, P2531-R P2530-H, P2531-H Spot weld chisel P2530-R, P2531-R P2530-H, P2531-H

71 Accessories Designation Width Length For Tool Ordering No. Rivet snap 3 Rivet 3 Rivet snap 4 Rivet 4 Rivet snap 5 Rivet 5 Rivet snap 6 Rivet 6 90 P2530-R, P2531-R P2530-R, P2531-R P2530-R, P2531-R P2530-R, P2531-R Chisel blank P2535-R P2535-R P2535-H P2535-H P2536-R P2536-R P2536-H, P2539-H P2536-H, P2539-H Flat chisel P2535-R P2535-H P2536-R P2536-H, P2539-H Point chisel P2535-R P2535-H P2536-R P2536-H, P2539-H Wide flat chisel P2535-R P2535-H P2536-R P2536-H, P2539-H

72 Vibration and Sound values Vibration total value (3 axes value) according to ISO Valid from 2010 Sound pressure levels and sound power levels a according to ISO Vibration total value (3 axes value) according to ISO Valid from 2010 Sound pressure levels and sound power levels a according to ISO Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure db(a) Sound power db(a) Impact Wrenches W W W W2815 Pin retainer W W2315XP-ATEX W2320XP-ATEX W W W2210A W W W W W2225C W2226C W W Ratchet Wrenches W W W W W W W W W W W2200A W2201A Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure db(a) Sound power db(a) Screwdrivers S2305 < S2326 < S2308-C < S2309-C < S2310-C < S2340-C < S2360-C < S2370-C < S2450-P < S2451-P < S2452-P < S2416-L < S2426-L < S2428-L < Vibration total value (3 axes value) according to ISO Valid from 2010 Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure levels and sound power levels a according to ISO Sound pressure db(a) Sound power db(a) Screwdrivers S S Vibration total value (3 axes value) according to ISO Valid from 2010 Sound pressure levels and sound power levels a according to ISO Vibration total value (3 axes value) according to ISO Valid from 2010 Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure levels and sound power levels a according to ISO Sound pressure db(a) Sound power db(a) Battery tools B B B B Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure db(a) Sound power db(a) Drills D2112 < D2116 < D D2148-R D2160 < D2163 < D2112Q < D2116Q < D2121Q D2148-RQ D2160-Q < D2163-Q < a The uncertainty in the sound levels is 3 db(a). Additional information about the tests, vibration control and regarding in-use vibrations can be found at the link, 72

73 Vibration total value (3 axes value) according to ISO Valid from 2010 Sound pressure levels and sound power levels a according to ISO Vibration total value (3 axes value) according to ISO Valid from 2010 Sound pressure levels and sound power levels a according to ISO Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure db(a) Sound power db(a) Grinders Vertical grinder G G2416 < Angle grinder G G G G G2510-US G2510-US-4" G2510-US-4.5" G G G Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure db(a) Sound power db(a) Percussive P P P P P P P2530-H P2530-R P2531-H P2531-R P2535-H P2535-R P2536-H P2536-R P2539-H Vibration total value (3 axes value) according to ISO Valid from 2010 Sound pressure levels and sound power levels a according to ISO Vibration total value (3 axes value) according to ISO Valid from 2010 Sound pressure levels and sound power levels a according to ISO Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure db(a) Sound power db(a) Grinders Die grinder G < G2440 < G G2414-S080 < G2414-S120 < G2414-S G2414-S200 < G2414-S250 < G2414 S088-US < G2414 S125-US < G2414 S155-US G2414 S205-US < G2414 S255-US < G G2424-S <70 - G2424-S120 < G2424-S150 < G2424-S200 < G2424-S G2424 S088-US <70 - G2424 S125-US < G2424 S155-US < G2424 S205-US < G2424 S255-US G Value 3-axes m/s 2 Uncertainty m/s 2 Sound pressure db(a) Sound power db(a) Sanding and polishing G2510 S066 < G2510 S085 < G2510-S066-M14 < G2510-S085-M14 < G2302 <2.5 < G2502 < G2403 < G2404 < G2406 < G2407 < G2407M14 < G N G N G N G I G I G I G C G C G C G G a The uncertainty in the sound levels is 3 db(a). Additional information about the tests, vibration control and regarding in-use vibrations can be found at the link, 73