Wheel Alignment And Diagnostic Angles (STE04)
|
|
- Myron Mason
- 5 years ago
- Views:
Transcription
1 Module 1 Wheel Alignments Wheel Alignment And Diagnostic Angles (STE04) Wheel Alignments o Conditions Requiring An Alignment o Conditions Requiring An Alignment (cont d) o Why We Do Checks And Alignments o Alignment Check o Alignment o Alignment Cautions Pre-Repair And Alignment Checklist o Pre-Repair/Alignment Inspection o Pre-Repair/Alignment Inspection (cont d) o Pre-Repair/Alignment Inspection (cont d) o Recording Pre-Alignment Front Angles o Recording Pre-Alignment Rear Angles Ride Height o Ride Height o Incorrect Ride Height o Measuring Ride Height o Ride Height Measurements o Parts That Affect Ride Height I-CAR Vehicle Prop Assembly Activity o I-CAR Vehicle Prop Assembly o Rear Axle Installation o Camber Assembly o Caster Assembly o Toe Assembly o SAI And Scrub Radius Assembly Module 2 Toe Toe Defined o Toe o Negative Toe o Positive Toe o Uneven Toe o Zero Toe o Toe Measurements o Individual Toe Inter-Industry Conference On Auto Collision Repair 1
2 o Total Toe o Determining Total Toe Activity o Vehicle Maker Toe Specifications o Pre-Toe Adjustment Considerations o Incorrect Wheel Position o Adjusting Front Toe o Tie Rod/Control Arm Relationship o Tie Rod/Control Arm Relationship (cont d) o Bump Steer o Bump Steer Inspection Toe Activity o I-CAR Vehicle Prop Toe o Diagnosing Incorrect Toe Activity o Diagnosing Incorrect Toe Activity (cont d) Module 3 Camber Camber Defined o Camber o Positive Camber o Zero Camber o Negative Camber o Measuring Camber o Video: Performing An Alignment Check o Camber Specifications o Pre-Adjustment Considerations o Pre-Adjustment Considerations (cont d) o Before Adjusting Camber o Strut Suspension Adjustable Camber o Extreme Strut Camber Adjustments o Adjusting Camber On SLA-Type o Adjusting Camber On Solid Axles o Video: Camber o Specification Manuals o Vehicle Alterations That Affect Camber Camber Activity o I-CAR Vehicle Prop Camber o Diagnosing Incorrect Camber Activity o Diagnosing Incorrect Camber Activity (cont d) o Diagnosing Incorrect Camber Activity (cont d) Inter-Industry Conference On Auto Collision Repair 2
3 o Module Summary Module 4 Caster Caster Defined o Caster o Positive Caster o Excessive Positive Caster o Caster Near Zero o Caster And Projected Vehicle Load o Positive Caster And Spindle Movement o Zero Caster And Spindle Movement o Caster And Tire Wear o Positive Caster When Turning o Camber Roll, Caster, And Tire Wear o Variables Affecting Caster o Measuring Caster o MacPherson Strut And Caster Adjustment o SLA Caster Adjustment o Video: Caster o Solid Axle Caster Adjustment Strut Suspension Pivot Point Locations o Determining Pivot Point Locations SLA Suspension Pivot Point Locations o SLA Upper Pivot Point Locations o SLA Lower Pivot Point Locations Solid Axle Pivot Point Locations o Solid Axle Pivot Point Locations o Diagnosing Caster o Diagnosing Right Side Caster o Diagnosing Left Side Caster o Diagnosing Caster Pull Caster, Camber, and Toe Angle Activity o Caster, Camber, And Toe Angle Activity o Diagnosing Caster, Camber, And Toe Activity o Diagnosing Caster, Camber, And Toe Activity (cont d) o Diagnosing Caster, Camber, And Toe Activity (cont d) o Diagnosing Caster, Camber, And Toe Activity (cont d) o Diagnosing Toe Activity o Diagnosing Camber Activity o Diagnosing Incorrect Toe Activity Module 5 Rear Vehicle Measurements Inter-Industry Conference On Auto Collision Repair 3
4 Wheelbase o Wheelbase o Wheelbase As A Diagnostic Measurement o Inconsistent Side-To-Side Wheelbase Setback o Setback o Setback (cont d) Tracking o Wheel Tracking o Wheel Tracking Quick-Check Tools o Wheel Tracking Quick-Check Steps o Wheel Tracking Quick-Check Steps (cont d) Thrust Angle o Thrust Angle o Out-Of-Specification Thrust Angle o Incorrect Thrust Angle Causes o Thrust Angle Alignment o Measuring For Thrust Angle Misalignment Rear Axle Offset o Rear Axle Offset o Measuring Rear Axle Offset Rear Angles o Rear Wheel Alignment Angles o Rear Wheel Alignment Angles (cont d) o Rear Wheel Angle Adjustments Tracking Activity o I-CAR Vehicle Prop Tracking o Diagnosing Incorrect Thrust Angle Activity o Diagnosing Incorrect Thrust Angle Activity (cont d) o Diagnosing Incorrect Thrust Angle Activity (cont d) o Diagnosing Incorrect Thrust Angle Activity (cont d) o I-CAR Vehicle Prop Offset o Diagnosing Incorrect Offset Activity o Diagnosing Incorrect Offset Activity (cont d) o Diagnosing Incorrect Offset Activity (cont d) o Independent Rear Suspension o Incorrect Independent Rear Suspension Activity Inter-Industry Conference On Auto Collision Repair 4
5 Module 6 Diagnostic Angles Toe-Out-On-Turns o Toe-Out-On-Turns o Video: Toe And Turning Radius o Wheels Do Not Turn Sharp Enough o Incorrect Toe-Out-On-Turns o Video: Measuring Toe-Out-On-Turns Steering Axis Inclination (SAI) o Steering Axis Inclination (SAI) o Steering Axis Inclination (SAI) (cont d) o Function Of SAI o SAI Specifications o No SAI Specifications Available o Identifying SAI o Measuring An Upper Pivot o Measuring A Lower Pivot Point o Causes Of Improper SAI o Excessive SAI o Too Little SAI o Correcting SAI o Adjusting SAI And Camber o Adjusting Strut SAI o Adjusting SLA SAI o How Much Is One Degree? SAI Activity o SAI Diagnosis Activity Included Angle o Included angle o Video: Measuring Alignment Diagnostic Angles o Alignment Diagnostic Angles Discussion Activity o Changing Strut Included Angle At Upper Pivot o Changing Included Angle And Camber o Changing Included Angle SLA o Adjusting On A Solid Axle o Video: Changing Included Angle o Pre-Camber Adjustment Considerations Included Angle Activity o Included Angle Diagnosis Activity o Included Angle Diagnosis Activity (cont d) o Included Angle Diagnosis Activity (cont d) Scrub Radius Inter-Industry Conference On Auto Collision Repair 5
6 o Scrub Radius o Positive Scrub Radius o Negative Scrub Radius o Incorrect Scrub Radius o Video: Changing Scrub Radius Scrub Radius Activity o Scrub Radius Diagnosis Activity Module 7 Types Of Alignments Types Of Alignments o Two-Wheel Alignments o Thrust Angle Alignments o Four-Wheel Alignment o Sublet Alignments o Post-Alignment Test Drive I-CAR Vehicle Prop Alignment Activity o Total Vehicle Alignment o Total Vehicle Alignment (cont d) o Center The Steering Wheel Check o Measurements Before An Alignment o Toe-Out-On-Turns Test o Total Vehicle Alignment Diagnosis Activity Inter-Industry Conference On Auto Collision Repair 6
Camber Angle. Wheel Alignment. Camber Split. Caster Angle. Caster and Ride Height. Toe Angle. AUMT Wheel Alignment
AUMT 1316 - Wheel Alignment 11/15/11 Camber Angle Wheel Alignment Donald Jones Brookhaven College Camber Split Camber is the amount that the centerline of the wheel tilts away from true vertical when viewed
More informationWhy do cars need Alignment
Why do cars need Alignment The main purpose of wheel alignment is to make the tires roll without Scuffing, slipping, or dragging under all operating conditions. Caster Camber Toe Steering axis inclination
More informationSuspension and Steering Alignment
Suspension and Steering Alignment Matthew Whitten Brookhaven College Alignment Components Ride height Caster Camber Included angle Scrub radius Thrust angle Toe Turning radius Toe out on turns Steering
More informationATASA 5 th. Wheel Alignment. Please Read The Summary. ATASA 5 TH Study Guide Chapter 47 Pages: Wheel Alignment 64 Points
ATASA 5 TH Study Guide Chapter 47 Pages: 1403 1423 64 Points Please Read The Summary Before We Begin Keeping in mind the Career Cluster of Transportation, Distribution & Logistics Ask yourself: What careers
More informationGENERAL INFORMATION. Wheel Alignment Theory & Operation
Fig. 1: Checking Steering Linkage GENERAL INFORMATION Wheel Alignment Theory & Operation ADJUSTMENTS NOTE: This article is intended for general information purposes only. This information may not apply
More informationHunter Alignment. This alignment education series also helps prepare technicians for the ASE A4 Certification.
Hunter Alignment Hunter offers entry and intermediate level alignment courses throughout the county. The combination of discussion and hands-on lab/shop activities melds theory with reality. This alignment
More informationHunter Alignment. The following courses are available. Read descriptions of each on the pages that follow.
Hunter Alignment Two to five day courses for both entry-level and seasoned technicians who need wheel alignment training. Hunter Alignment courses are presented across the country. The following courses
More information2004 SUSPENSION. Wheel Alignment - Corvette. Caster Cross +/ / Fastener Tightening Specifications Specification Application
2004 SUSPENSION Wheel Alignment - Corvette SPECIFICATIONS WHEEL ALIGNMENT SPECIFICATIONS Wheel Alignment Specifications Camber Cross Caster Cross Suspension Camber Tolerance Caster Tolerance FE1 & FE3
More informationBasic Wheel Alignment Techniques
Basic Wheel Alignment Techniques MASTERING THE BASICS: Modern steering and suspension systems are great examples of solid geometry at work. Wheel alignment integrates all the factors of steering and suspension
More informationWheel Alignment Fundamentals
CHAPTER 67 Wheel Alignment Fundamentals OBJECTIVES Upon completion of this chapter, you should be able to: Describe each wheel alignment angle. Tell which alignment angles cause wear or pull. KEY TERMS
More informationBASIC WHEEL ALIGNMENT
BASIC WHEEL ALIGNMENT You have got to know all the angles. Correct wheel alignment plays a huge part in a customer s positive driving experience. Having it dialed in correctly is essential to proper vehicle
More informationAER Automotive Steering and Suspension
2013 NATEF JOB TASKS COMPLETION REQUIREMENT: P1-95% P2-80% P3-50% Student Name: DETAILED COURSE CONTENT AUTOMOTIVE SUSPENSION AND STEERING TECHNICIAN DEMONSTRATE PROFICIENCY IN SUSPENSION AND STEERING
More informationHemet High School NATEF SUSPENSION AND STEERING CHECKLIST. Name Date Period
Hemet High School NATEF SUSPENSION AND STEERING CHECKLIST Name Period For every task in Suspension and Steering, the following safety requirement must be strictly enforced: Comply with personal and environmental
More informationUNIBODY/FRAME/WHEEL ALIGNMENT II ABCT 2212
UNIBODY/FRAME/WHEEL ALIGNMENT II ABCT 2212 A. Course Description Credits: 6.00 Lecture Hours/Week: 1.00 Lab Hours/Week: 5.00 OJT Hours/Week: 0 Prerequisites: None Corequisites: None MnTC Goals: None This
More information2013 NATEF Task Area A-4 Suspension, Steering, Alignment7-2013
2013 NATEF Task Area A-4 Suspension, Steering, Alignment7-2013 A. Steering System Diagnosis & Repair B. Suspension System Diagnosis & Repair C. Wheel Alignment Diagnosis & Adjustment D. Wheel & Tire Diagnosis
More informationWHEEL ALIGNMENT PROCEDURES
Page 1 of 8 WHEEL ALIGNMENT PROCEDURES TURNING ANGLE Turn steering wheel fully right and then left, and observe turning radius on both wheels. If turning radius is incorrect, inspect and replace any damaged
More informationINTRO/APPLICATIONS PARTS TOOLS ACCESSORIES BRAKE & CV SPC GEAR & INDEXES APPLICATIONS PARTS
TABLE OF CONTENTS INTRO/.................. 2-39 How to Use the Sourcebook......................................2 How to Sell Alignment...........................................2 Training Resources..............................................3
More informationVERNON COLLEGE SYLLABUS. DIVISION: Information & Industrial Technology DATE: Fall COURSE NUMBER AND TITLE: AUMT 1416 Suspension and Steering
VERNON COLLEGE SYLLABUS DIVISION: Information & Industrial Technology DATE: Fall 2010 CREDIT HRS: 4 HRS/WK LEC: 3 HRS/WK LAB: 3 LEC/LAB: 6 I. CATALOG DESCRIPTION: Theory and operation of automotive suspension
More informationSUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS
XJ SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 7 page REAR SUSPENSION... 16 ALIGNMENT TABLE OF CONTENTS page AND WHEEL ALIGNMENT...1 DIAGNOSIS AND TESTING SUSPENSION
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
WJ SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 4 page REAR SUSPENSION... 15 ALIGNMENT INDEX page AND WHEEL ALIGNMENT... 1 SERVICE PROCEDURES PRE-ALIGNMENT... 2 AND WHEEL
More informationTypical mounting of a dial indicator for a radial check. Moog Automotive, Inc.
Inspect / Service / Test / Replace To find out if the ball joint is loose beyond manufacturer's specifications, use an accurate measuring device. Most load carrying ball joints have a wear limit of 0.060"
More information2. MEASURE VEHICLE HEIGHT. (b) Measure the vehicle height. Measurement points: C: Ground clearance of front wheel center
ADJUSTMENT If the wheel alignment has been adjusted, and if suspension or underbody components have been removed/installed or replaced, be sure to perform the following initialization procedure in order
More informationAXLE ALIGNMENT ZF (40 FT)
SECTION 04-000.10 04-000.10/ 1 2010DE06 GENERAL CONDITIONS See Figures 1 and 2 for the geometry of the frontand rear axles. Figure 3 represents the axis system of a Nova LFS 40-ft bus. Before performing
More information2010 Prince Edward Island Department of Education and Early Childhood Development P.O. Box 2000, Charlottetown Prince Edward Island Canada, C1A 7N8
2010 Prince Edward Island Department of Education and Early Childhood Development P.O. Box 2000, Charlottetown Prince Edward Island Canada, C1A 7N8 Tel. (902) 368-4600 Fax. (902) 368-4622 http://www.gov.pe.ca/eecd/
More informationTorque steer effects resulting from tyre aligning torque Effect of kinematics and elastokinematics
P refa c e Tyres of suspension and drive 1.1 General characteristics of wheel suspensions 1.2 Independent wheel suspensions- general 1.2.1 Requirements 1.2.2 Double wishbone suspensions 1.2.3 McPherson
More informationGROUP 33A 33A-1 CONTENTS GENERAL DESCRIPTION... 33A-2 FRONT SUSPENSION DIAGNOSIS. 33A-3 LOWER ARM... 33A-13 SPECIAL TOOLS... 33A-5
33A-1 GROUP 33A CONTENTS GENERAL DESCRIPTION 33A-2 DIAGNOSIS 33A-3 INTRODUCTION TO FRONT SUSPENSION DIAGNOSIS 33A-3 DIAGNOSIS TROUBLESHOOTING STRATEGY 33A-3 SYMPTOM CHART 33A-3 SYMPTOM PROCEDURES 33A-3
More informationFRONT SUSPENSION GROUP 33A 33A-1 CONTENTS GENERAL DESCRIPTION... 33A-2 FRONT SUSPENSION DIAGNOSIS. 33A-3 LOWER ARM... 33A-13 SPECIAL TOOLS...
33A-1 GROUP 33A FRONT SUSPENSION CONTENTS GENERAL DESCRIPTION......... 33A-2 DIAGNOSIS. 33A-3 INTRODUCTION TO DIAGNOSIS........................ 33A-3 DIAGNOSIS TROUBLESHOOTING STRATEGY...... 33A-3 SYMPTOM
More informationThe WHAT and WHY of. Toe Caster - Camber Kingpin Inclination - Thrust Angle Steering Angle Wheel setback
The WHAT and WHY of Toe Caster - Camber Kingpin Inclination - Thrust Angle Steering Angle Wheel setback WHEEL ALIGNMENT SIMPLIFIED Wheel alignment is often considered complicated and hard to understand
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
TJ SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 5 page REAR SUSPENSION... 12 ALIGNMENT INDEX page GENERAL INFORMATION WHEEL ALIGNMENT... 1 DIAGNOSIS AND TESTING SUSPENSION
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
TJ SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 6 page REAR SUSPENSION... 13 ALIGNMENT INDEX page DESCRIPTION AND OPERATION WHEEL ALIGNMENT... 1 DIAGNOSIS AND TESTING SUSPENSION
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
ZJ SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 6 page REAR SUSPENSION... 14 ALIGNMENT INDEX page GENERAL INFORMATION WHEEL ALIGNMENT... 1 DIAGNOSIS AND TESTING SUSPENSION
More informationWheel Alignment - Basics
Service Training Self Study Program 860103 Wheel Alignment - Basics Volkswagen Group of America, Inc. Volkswagen Academy Printed in U.S.A. Printed 2/2012 Course Number 860103 2012 Volkswagen Group of America,
More informationFRONT SUSPENSION GROUP CONTENTS GENERAL INFORMATION FASTENER TIGHTENING SPECIFICATIONS GENERAL SPECIFICATIONS...
33-1 GROUP 33 FRONT SUSPENSION CONTENTS GENERAL INFORMATION 33-2 FASTENER TIGHTENING SPECIFICATIONS 33-2 GENERAL SPECIFICATIONS 33-3 SERVICE SPECIFICATIONS 33-3 DIAGNOSIS 33-4 INTRODUCTION TO DIAGNOSIS
More informationSU01 Independent, Strut
Uniform Procedures For Collision Repair SU01 Independent, Strut 1. Description This procedure describes the diagnosis, repair, and inspection of an independent, strut-type suspension system. 2. Purpose
More informationFRONT SUSPENSION GROUP CONTENTS GENERAL INFORMATION ON-VEHICLE SERVICE FASTENER TIGHTENING SPECIFICATIONS...
33-1 GROUP 33 FRONT SUSPENSION CONTENTS GENERAL INFORMATION 33-2 FASTENER TIGHTENING SPECIFICATIONS 33-2 GENERAL SPECIFICATIONS 33-3 SERVICE SPECIFICATIONS 33-3 LUBRICANTS 33-3 DIAGNOSIS 33-4 INTRODUCTION
More informationFRONT SUSPENSION GROUP CONTENTS GENERAL INFORMATION SPECIFICATIONS STRUT ASSEMBLY FRONT SUSPENSION DIAGNOSIS.
33-1 GROUP 33 FRONT SUSPENSION CONTENTS GENERAL INFORMATION 33-2 SPECIFICATIONS 33-3 FASTENER TIGHTENING SPECIFICATIONS 33-3 GENERAL SPECIFICATIONS 33-3 SERVICE SPECIFICATIONS 33-3 LUBRICANT 33-3 DIAGNOSIS
More informationSR01 Steering, Gearbox
Uniform Procedures For Collision Repair SR01 Steering, Gearbox 1. Description This procedure describes the diagnosis, repair, and inspection of a gearbox-type steering system. Requirements for both manual
More information1. SPECIFICATIONS 2. WHEEL ALIGNMENT Front Suspension. (gas type) Rear Suspension. (gas type)
441101 053 1. SPECIFICATIONS Front Suspension Rear Suspension Description Suspension type Spring type Shock absorber type Stabilizer bar type Suspension type Spring type Shock absorber type Stabilizer
More informationWHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES
WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES 1988 Jeep Cherokee 1988 Wheel Alignment INTRODUCTION PRE-ALIGNMENT VEHICLE CHECKS Prior to making wheel alignment adjustments, check and adjust the following
More informationSolar Car Suspension Design Considerations for achieving an efficient and stable vehicle
Innovators Educational Foundation Solar Car Suspension Design Considerations for achieving an efficient and stable vehicle Solar Car Conference, February 1-3, 2019 Southern Illinois University, Edwardsville,
More information1 of 9 7/24/2014 9:02 PM
1 of 9 7/24/2014 9:02 PM Four-Wheel Alignment Special Service Tools 204-805 CAUTION: Make sure the vehicle is on a flat level surface. CAUTION: Make sure the tire pressures are within specification. CAUTION:
More information1. SPECIFICATIONS 2. WHEEL ALIGNMENT
441101 083 1. SPECIFICATIONS Front Suspension Rear Suspension Description Suspension type Spring type Shock absorber type Stabilizer bar type Suspension type Spring type Shock absorber type Stabilizer
More information2011 MKS Workshop Manual. SECTION : Suspension System - General Information DESCRIPTION AND OPERATION Procedure revision date: 05/25/2010
SECTION 204-00: Suspension System - General Information 2011 MKS Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 05/25/2010 Wheel Alignment Angles Camber Negative and Positive Camber
More informationINSTRUCTIONS FOR STRUT FRONT, 4-LINK REAR, ROADSTER CHASSIS
#917406 Page 1 of 5 7406 INSTRUCTIONS FOR STRUT FRONT, 4-LINK REAR, ROADSTER CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION 1 1 4215 Front frame rail strut 1 5/8 (pair) 2 1 4236 Roadster firewall
More informationDIAGNOSIS AND TESTING
DIAGNOSIS AND TESTING SUSPENSION AND STEERING SYSTEM 2007 SUSPENSION Suspension - Nitro CONDITION POSSIBLE CAUSES CORRECTION FRONT END NOISE 1. Loose or worn wheel bearings. 1. Replace wheel bearings.
More informationSUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS
DN SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION - 4x2... 6 page FRONT SUSPENSION - 4x4... 14 REAR SUSPENSION... 23 ALIGNMENT TABLE OF CONTENTS page AND OPERATION WHEEL
More informationWheel Alignment Service
CHAPTER 68 Wheel Alignment Service OBJECTIVES Upon completion of this chapter, you should be able to: Perform a prealignment inspection of the steering and suspension. Describe how to adjust caster, camber,
More informationSR11 Steering, Rack-And-Pinion
Uniform Procedures For Collision Repair SR11 Steering, Rack-And-Pinion SR Menu Procedure Menu 1. Description This procedure describes diagnosis, replacement, and inspection of a rack-and-pinion steering
More informationAutomotive Suspension and Steering Course number-20123
Automotive Suspension and Steering Course number-20123 There is a high demand for trained individuals in the automotive service field. The desire for the students to receive industry-based training at
More informationWheel Alignment Defined
Wheel Alignment Defined While it's often referred to simply as an "alignment" or "wheel alignment," it's really complex suspension angles that are being measured and a variety of suspension components
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT141 AUTOMOTIVE STEERING AND SUSPENSION SYSTEMS. 3 Credit Hours. Prepared by: Gerard Uhls Date: November, 2011
JEFFERSON COLLEGE COURSE SYLLABUS AUT141 AUTOMOTIVE STEERING AND SUSPENSION SYSTEMS 3 Credit Hours Prepared by: Gerard Uhls Date: November, 2011 Revised by: Gerard Uhls Date: September 16, 2016 Chris DeGeare,
More informationSU11 Independant, SLA
Uniform Procedures For Collision Repair UPCR SU11 Independant, SLA 1. Description This procedure describes the diagnosis, repair, and inspection of an independent, short-arm, long-arm (SLA) suspension
More information1. General Description
General Description 1. General Description A: SPECIFICATION Front Rear Model Wheel arch height (Tolerance: +12 mm 24 mm ( +0.47 in 0.94 in)) mm (in) 376 (14.8) Camber (Tolerance: 0 45 Differences between
More informationChapter-3. Wheel Alignment Wheel Kinematics and Compliance Steering Performance Criteria for Handling
Chapter-3 Wheel Alignment Wheel Kinematics and Compliance Steering Performance Criteria for Handling Components of Suspension Linkage Bearings, Bushings Springs Dampers Wheel Geometry Wheel Geometry Wheel
More informationDesigning and Hard Point Optimization of Suspension System of a Three-Wheel Hybrid Vehicle
ISSN (O): 2393-8609 International Journal of Aerospace and Mechanical Engineering Designing and Hard Point Optimization of Suspension System of a Three-Wheel Hybrid Vehicle Gomish Chawla B.Tech Automotive
More informationWHEEL ALIGNMENT. Wheel arch height (Front and rear) <Ref. to FS-7, WHEEL ARCH HEIGHT, INSPECTION, Wheel Alignment.>
2. Wheel Alignment A: INSPECTION Check the following items before taking wheel alignment measurement. Check items before taking wheel alignment measurement: tire air pressure unbalanced right and left
More informationINSTRUCTIONS FOR STRUT FRONT, 4-LINK REAR, 1 5/8 FRAME, FULL SIZE, 4130 ELIMINATOR CHASSIS
#917230 Page 1 of 6 7230 INSTRUCTIONS FOR STRUT FRONT, 4-LINK REAR, 1 5/8 FRAME, FULL SIZE, 4130 ELIMINATOR CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION 1 2 4350 Cage Side 2 2 4351 Forward strut
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT142 AUTOMOTIVE STEERING AND SUSPENSION SYSTEMS LAB. 3 Credit Hours. Prepared by: Gerard Uhls Date: December 2011
JEFFERSON COLLEGE COURSE SYLLABUS AUT142 AUTOMOTIVE STEERING AND SUSPENSION SYSTEMS LAB 3 Credit Hours Prepared by: Gerard Uhls Date: December 2011 Revised by: Gerard Uhls Date: September 16. 2016 Chris
More informationFiat - Argentina - Wheel Aligner / Headlamp Aimer #16435
2017 Fiat - Argentina - Wheel Aligner / Headlamp Aimer #16435 Wheel Aligner / Headlamp Aimer Operation & Maintenance Manual Overview Fori Automation Version 1.2 4/21/2017 TABLE OF CONTENTS Section 1.0
More informationFRONT & REAR SUSPENSION SECTIONSU CONTENTS IDX. FRONT SUSPENSION...2 Precautions...2. REAR SUSPENSION...14 Precautions...14
FRONT & REAR SUSPENSION SECTIONSU GI MA EM LC EC CONTENTS FE FRONT SUSPENSION...2 Precautions...2 PRECAUTIONS...2 Preparation...2 SPECIAL SERVICE TOOLS...2 COMMERCIAL SERVICE TOOLS...2 Noise, Vibration
More informationALIGNMENT AND ROAD CROWN
Classification: Reference: Date: ST08-001 NTB08-097 October 9, 2008 ALIGNMENT AND ROAD CROWN APPLIED VEHICLES: All Nissan - except GT-R SERVICE INFORMATION Customers may report that their vehicle pulls
More informationFundamentals of Steering Systems ME5670
Fundamentals of Steering Systems ME5670 Class timing Monday: 14:30 Hrs 16:00 Hrs Thursday: 16:30 Hrs 17:30 Hrs Lecture 3 Thomas Gillespie, Fundamentals of Vehicle Dynamics, SAE, 1992. http://www.me.utexas.edu/~longoria/vsdc/clog.html
More informationFRONT SUSPENSION AND STEERING LINKAGE
A FRONT SUSPENSION AND STEERING LINKAGE CONTENTS GROUP 2 Page LOWER BALL JOINTS 12 LOWER CONTROL ARM AND SHAFT... 9 LOWER CONTROL ARM STRUT 12 PRE-ALIGNMENT INSPECTION Height Adjustment., 4 RUBBER ISOLATED
More information7211 A-ARM FRONT, 4-LINK, 3 X 2 FRAME, INTERMEDIATE, ELIMINATOR CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION
#917211 Page 1 of 6 7211 A-ARM FRONT, 4-LINK, 3 X 2 FRAME, INTERMEDIATE, ELIMINATOR CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION 1 2 4138 Cage Side 2 2 4208 Forward strut 3 1 4038 Main Hoop 4 1
More informationWheel Alignment. Wheel arch height (front and rear wheels) <Ref. to FS-8, WHEEL ARCH HEIGHT, INSPECTION, Wheel Alignment.>
2. Wheel lignment : INSPECTION Check the following items before taking wheel alignment measurement. Check items before taking wheel alignment measurement: Tire inflation pressure Unbalanced right and left
More informationSuspension systems and components
Suspension systems and components 2of 42 Objectives To provide good ride and handling performance vertical compliance providing chassis isolation ensuring that the wheels follow the road profile very little
More information2003 FORESTER SERVICE MANUAL QUICK REFERENCE INDEX
2003 FORESTER SERVICE MANUAL QUICK REFERENCE INDEX CHASSIS SECTION FRONT SUSPENSION FS REAR SUSPENSION RS WHEEL AND TIRE SYSTEM WT This service manual has been prepared to provide SUBARU service personnel
More informationFRONT WHEEL ALIGNMENT INSPECTION
SA4 : : F01718 F05219 D B A C F14317 INSPECTION NOTICE: SA23H05 Be sure to perform the zero point calibration of the steering angle, master cylinder pressure, yaw rate and deceleration sensors (See page
More informationFRONT WHEEL ALIGNMENT
2 Front: B A A Rear: C D Front SUENSION FRONT WHEEL ALIGNMENT D F046082E03 B FRONT WHEEL ALIGNMENT ADJUSTMENT 1. INECT TIRE (a) Inspect the tires (see page TW-3). 2. MEASURE VEHICLE HEIGHT Standard vehicle
More informationFour-Wheel Alignment ( )
Published: Mar 7, 2005 Four-Wheel Alignment (57.65.04) CAUTION: Make sure the vehicle is on a flat level surface. CAUTION: Make sure the tire pressures are within specification. CAUTION: Make sure that
More informationInstallation Instructions S197 Mustang Xtreme-Grip Coil Over System CCK /S
Sonoma Raceway Boise, ID 83704 p 415.489.0866 c 415.425.0030 www.cortexxracing.com Installation Instructions S197 Mustang Xtreme-Grip Coil Over System CCK-40-1000/S 2005-2014 Mustang Shelby/Boss/GT (8.8
More informationJHM Butt & Co Ltd. Station Yard, Bawtry, Doncaster, South Yorks DN10 6QD Tel:
JHM Butt & Co Ltd Station Yard, Bawtry, Doncaster, South Yorks DN10 6QD Tel: 01302 710868 Email: info@buttsofbawtry.com www.buttsofbawtry.com Our Tracking Guage Single Steer Rear Flag - Car Turn Table
More informationKinematic Analysis of Roll Motion for a Strut/SLA Suspension System Yung Chang Chen, Po Yi Tsai, I An Lai
Kinematic Analysis of Roll Motion for a Strut/SLA Suspension System Yung Chang Chen, Po Yi Tsai, I An Lai Abstract The roll center is one of the key parameters for designing a suspension. Several driving
More informationFRONT AXLE GROUP 11A CONTENTS 11A-0. SECTION 0 GENERAL Removal 3 SECTION 1 FRONT AXLE HUB 1
11A-0 GROUP 11A FRONT AXLE CONTENTS SECTION 0 GENERAL 1 1-1 Removal 3 SECTION 1 FRONT AXLE HUB 1 1-2 Inspection 3 1-3 Installation 4 1. Removal and Installation 1 1-1 Removal 1 SECTION 3 WHEEL ALIGNMENT
More informationALIGNING A 2007 CADILLAC CTS-V
ALIGNING A 2007 CADILLAC CTS-V I ll describe a four-wheel alignment of a 2007 Cadillac CTS-V in this document using homemade alignment tools. I described the tools in a previous document. The alignment
More informationFRONT & REAR SUSPENSION SECTIONSU CONTENTS IDX. FRONT SUSPENSION...2 Precautions...2
FRONT & REAR SUSPENSION SECTIONSU GI MA EM LC EC CONTENTS FE...2 Precautions...2 PRECAUTIONS...2 Preparation...2 SPECIAL SERVICE TOOLS...2 COMMERCIAL SERVICE TOOLS...2 Noise, Vibration and Harshness (NVH)
More informationTRUCK AND BUS TYRE I TECHNICAL MANUAL MAINTENANCE AND CARE
TRUCK AND BUS TYRE I TECHNICAL MANUAL MAINTENANCE AND CARE About tyre inflation Truck alignment and tyre wear Tyre damage TECHNICAL INFORMATION MAINTENANCE AND CARE About tyre inflation ONE OF THE MOST
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
DN SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 5 page REAR SUSPENSION... 13 ALIGNMENT INDEX page GENERAL INFORMATION WHEEL ALIGNMENT... 1 DIAGNOSIS AND TESTING PRE-ALIGNMENT
More information7260 INSTRUCTIONS FOR ELIMINATOR II STRUT FRONT, 4-LINK REAR, MILD STEEL, FULL SIZE, SERIES CHASSIS
#917260 Page 1 of 6 7260 INSTRUCTIONS FOR ELIMINATOR II STRUT FRONT, 4-LINK REAR, MILD STEEL, FULL SIZE, SERIES CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION 1 2 4139 Cage Side 2 2 4250 Forward
More informationFRONT SUSPENSION GROUP 2 FRONT SUSPENSION 2-1 CONTENTS SPECIFICATIONS VC-1, VC-2, VC-3 VY-1 TOOL LIST. Page
GROUP 2 FRONT SUSPENSION CONTENTS Page Specifications 1 Tool List.... 1 Torque Reference 2 Preparation for Measuring Front End Alignment... 2 Front Suspension Height Adjustment 3 Front Suspension Alignment
More informationELECTRONIC CHASSIS ALIGNMENT
SUSPENSION Steering and Wheel Alignment - Repair Instructions - X6 ELECTRONIC CHASSIS ALIGNMENT 32... OVERVIEW OF STEERING Fig. 1: Overview Of Steering 32... OVERVIEW OF ACTIVE FRONT STEERING Fig. 2: Overview
More informationGroup 2 FRONT SUSPENSION CONTENTS
FRONT SUSPENSION 1 Group 2 FRONT SUSPENSION CONTENTS Paragraph Page Front Wheel Bearing Adjustment 8 5 Front Suspension Height Adjustment 9 5 Using Tool C-3608 Without Using Tool C-3608 Front Wheel Alignment
More informationFRONT & REAR SUSPENSION SECTIONSU CONTENTS IDX. FRONT SUSPENSION...2 Precautions...2
FRONT & REAR SUSPENSION SECTIONSU GI MA EM LC CONTENTS EC FE FRONT SUSPENSION...2 Precautions...2 PRECAUTIONS...2 Preparation...2 SPECIAL SERVICE TOOLS...2 COMMERCIAL SERVICE TOOLS...2 Noise, Vibration
More informationFRONT & REAR SUSPENSION SECTIONSU CONTENTS IDX. FRONT SUSPENSION...2 Precautions...2. Service Data and Specifications (SDS)...21
FRONT & REAR SUSPENSION SECTIONSU GI MA EM LC EC CONTENTS FE...2 Precautions...2 PRECAUTIONS...2 Preparation...2 SPECIAL SERVICE TOOLS...2 COMMERCIAL SERVICE TOOLS...2 Noise, Vibration and Harshness (NVH)
More informationWheel Alignment on Heavy-Duty Trucks
What you need to know about Wheel Alignment on Heavy-Duty Trucks January 2017 Price: $19.99 Contents What is Proper Wheel Alignment?................................. 3 Alignment Angles and Effects...................................
More informationPractice Test Brakes & Suspension.
Class: Date: Practice Test Brakes & Suspension. True/False Indicate whether the sentence or statement is true or false. 1. Disc brake calipers move a fraction of an inch and drum brake cylinders move a
More informationSECTION 2C FRONT SUSPENSION TABLE OF CONTENTS
SECTION 2C FRONT SUSPENSION TABLE OF CONTENTS Description and Operation... 2C-2 Front Suspension... 2C-2 Specifications... 2C-4 Component Locator... 2C-5 Front Suspension Assembly... 2C-5 Cross-Sectional
More informationSU41 Solid Axle, Leaf Springs
Uniform Procedures For Collision Repair SU41 Solid Axle, Leaf Springs 1. Description This procedure describes the diagnosis, repair, and inspection of a solid-axle, leaf-spring suspension system. 2. Purpose
More informationFRONT SUSPENSION SECTION CONTENTS E SUSPENSION FSU-1 FSU
E SUSPENSION A SECTION FRONT SUSPENSION B C D CONTENTS FSU PRECAUTIONS... 2 Precautions... 2 PREPARATION... 3 Special Service Tools... 3 Commercial Service Tools... 3 NOISE, VIBRATION, AND HARSHNESS (NVH)
More informationService Bulletin
Service Bulletin 06068 Applies To: ALL May 2, 2009 Vehicle Pulls or Drifts, and/or Steering Wheel Is OffCenter (Supersedes 06068, Vehicle Pulling or Drifting, dated October 4, 2007, to revise the information
More informationDynamic Analysis of Double Wishbone and Double Wishbone with S Link + Toe Link
RESEARCH ARTICLE OPEN ACCESS Dynamic Analysis of Double Wishbone and Double Wishbone with S Link + Toe Link Rajkumar Kewat, Anil Kumar Kundu,Kuldeep Kumar,Rohit Lather, Mohit Tomar RJIT, B.S.F ACADEMY
More informationWheel Alignment Basics Explained: Shimmed Control Arms
Wheel Alignment Basics Explained: Shimmed Control Arms By Joe Fisher This brief article is not meant to teach someone how to align the front steering/suspension but to explain the three basic specifications
More informationgeolinertm 680/670 WHEEL ALIGNERS
geolinertm 680/670 WHEEL ALIGNERS EZ-LINK* STEERING ANGLE SENSOR (SAS) RESET EZ-Link* software alerts the technician of OEM service & maintenance procedures related to Electronic Stability Control and
More information7256 INSTRUCTIONS FOR ELIMINATOR II A-ARM FRONT, 4-LINK REAR, MILD STEEL, INTERMEDIATE, SERIES CHASSIS
#917256 Page 1 of 7 7256 INSTRUCTIONS FOR ELIMINATOR II A-ARM FRONT, 4-LINK REAR, MILD STEEL, INTERMEDIATE, SERIES CHASSIS ITEM QTY SIZE/PART NO. TUBE CODE DESCRIPTION 1 2 4138 Cage Side 2 2 4208 Forward
More informationgeoliner 780 WHeel aligner
geoliner 780 WHEEL ALIGNER Maximize Profits with the geoliner TM 780 The geoliner TM 780 is the fastest, most accurate aligner in the industry. Thanks to its DigiSmart technology, the geoliner TM 780 s
More informationTechnical Service BULLETIN
Technical Service BULLETIN July 20, 2007 Title: Models: 05 06 Tacoma 4x4 & PreRunner SU006-07 SUSPENSION Introduction Some customers may experience a harsh ride from the rear suspension while carrying
More informationWheels. Wheels and Tires ! CAUTION. Wheel Selection
Wheel Selection Wheels Wheels are very important and critical components of your running gear system. When specifying or replacing your trailer wheels it is important that the wheels, tires, and axle are
More informationIndependent Front Suspension
Independent Front Suspension Technical Training Contents Why Independent? Tuthill Models Features and Benefits Description Special Tools Regular Maintenance Troubleshooting Available Kits Contacting Tuthill
More informationCustomer Engagement - Execution Playbook Module 1 WHEEL ALIGNMENTS ALIGNMENTS
Customer Engagement - Execution Playbook Module 1 WHEEL ALIGNMENTS -------------------------- ALIGNMENTS 101 ------------------------------ While a wheel alignment is often referred to simply as an alignment,
More informationOVERVIEW: This bulletin provides a diagnostic procedure for steering sensitivity.
NUMBER: GROUP: 19-002-01 REV. A Steering DATE: Sept. 28, 2001 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced,
More information