POTR / ROTR INSTALLATION INSTRUCTIONS. Pull Out and Rotating Rack. Instrucciones de instalación Installationsanleitung Instruções de Instalação

Transcription

1 INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d installation POTR ROTR Pull Out and Rotating Rack Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description POTR / ROTR

2 POTR / ROTR DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document. Chief is a registered trademark of Milestone AV Technologies. All rights reserved. IMPORTANT SAFETY INSTRUCTIONS WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions. Installation Instructions WARNING: Failure to read, thoroughly understand, and follow all instructions can result in serious personal injury, damage to equipment, or voiding of factory warranty! It is the installer s responsibility to make sure all components are properly assembled and installed using the instructions provided. WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury or damage to equipment! It is the installer s responsibility to make sure the structure to which this component is attached can support five times the combined weight of all equipment. Reinforce the structure as required before installing the component. WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer s responsibility to make sure the combined weight of all components located within the rack does not exceed 00 lbs (16.1 kg). Use with products heavier than the maximum weight indicated may result in instability or collapse of the rack causing possible injury. IMPORTANT! : Minimum spacings between the Accessories and components and the (ITC/AV) Rack Enclosure shall be maintained for safe operation of the equipment when installed in accordance with the National Electric Code, ANSI/NFPA Operating temperature inside rack shall not exceed 104 F. --SAVE THESE INSTRUCTIONS-- LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allentare il fissaggio Bevestiging losdraaien Desserrez les fixations Phillips Screwdriver Destornillador Phillips Kreuzschlitzschraubendreher Chave de fendas Phillips Cacciavite a stella Kruiskopschroevendraaier Tournevis à pointe cruciforme Open-Ended Wrench Llave de boca Gabelschlüssel Chave de bocas Chiave a punte aperte Steeksleutel Clé à fourche 2

3 Installation Instructions POTR / ROTR DIMENSIONS POTR "A" BASE HEIGHT DIMENSIONS: INCHES [MILLIMETERS] ROTR "A" BASE HEIGHT DIMENSIONS: INCHES [MILLIMETERS]

4 POTR / ROTR Installation Instructions TOOLS REQUIRED FOR INSTALLATION 7/16" PARTS A (1) [POTR] OR A (1) [ROTR] C (6) 1/4-20 x 1/2" B (6) 1/4-20 NOTE: Items B, C and D are already attached to ROTR and POTR in Models ROTR8, ROTR9, ROTR10, ROTR11, POTR8, POTR9, POTR10, and POTR11. D (2) [Rack rail] 4

5 Installation Instructions POTR / ROTR ASSEMBLY NOTE: Proceed to Step 2 if assembling Models POTR/ ROTR8,-9,-10 or Attach rack rails (D) to POTR/ROTR using three 1/4-20 x 1/2" pem studs (C) and three 1/4-20 lock nuts (B) for each rack rail. (See Figure 1) NOTE: Leave the hardware loose until all three fasteners on one rack rail have been installed, then tighten.. Attach POTR/ROTR base to floor of cabinet or to a pedestal or stand using 1/4-20 bolts (not included) through the base. (See Figure ) 4. The POTR/ROTR may now slide back and forth on the base. 5. Proceed to Completing Installation section. (D) (ROTR shown as example) Mounting holes Mounting holes 1 (B) x 6 (C) x 6 ROTR Only Figure 1. Unlock the thumbscrew in the ROTR front. (See Figure 4) 2. Pull out and swivel the ROTR as needed to gain access to the back.. Swivel ROTR to front and tighten thumbscrew to keep from swiveling. (See Figure 4) Figure 1 2. Remove and SAVE two screws from POTR/ROTR front and remove the cover plate. (See Figure 2) Cover plate x 2 Figure 2 (ROTR shown as example) Figure 4 5

6 POTR / ROTR Installation Instructions COMPLETING INSTALLATION 1. Close the POTR/ROTR. (See Figure 5) 2. Replace cover plate. (See Figure 5). Attach cover plate to POTR/ROTR with two fasteners removed in earlier step. (See Figure 5) IMPORTANT! : Ensure that fasteners fit through cover plate and into front of base. 1 Front of base 2 x 2 Figure 5 6

7 Installation Instructions POTR / ROTR 7

8 POTR / ROTR Installation Instructions Chief, a products division of Milestone AV Technologies Rev Milestone AV Technologies 0/16 USA/International A 646 City West Parkway, Eden Prairie, MN 5544 P / F / Europe A Franklinstraat 14, 600 DK Weert, Netherlands P +1 (0) F +1 (0) Asia Pacific A Office No. 918 on 9/F, Shatin Galleria Shan Mei Street Fotan, Shatin, Hong Kong P F