User Guide Manual del usuario

Transcription

1 User Guide Manual del usuario Transport Chair Transport Chair English... Page 2 Español... Página 14 USA

2 Contents Introduction...3 Parts List...4 Parts Diagram 5 Safety Precautions...6 Assembly...7 Operation...8 Wheel Lock Operation 8 Preparing to Sit 9 Preparing to Stand 10 Maintenance...11 Warranty USA

3 Introduction Congratulations on your purchase of a steel transport chair. Our transport chairs are a product of quality engineering and are manufactured to meet our own highly rigid specifications and will surpass all your expectations. In this manual, you will find the assembly, use and safety instructions for the transport chair. The transport chair is suitable for a single user with limited mobility and an aid. The transport chair is ideal for indoor and outdoor use. USA

4 Parts List Parts List Hand Grips (2) Folding Back Release Levers (2) Armrests (2) Safety Belt (1) Wheel Locks (2) Front Riggings (2) Heal Loops (2) Footplate (2) 4 USA

5 Parts List Parts Diagram USA

6 Safety Precautions Safety Precautions Please read carefully before using your transport chair. 1. Before entering or leaving the transport chair, engage the dual wheel locks against the tires on both rear wheels (refer to wheel lock operation on page 8). Make sure the front caster are in the forward position before transferring into or out of the transport chair 2. Do not move forward on the seat while leaning forward out of the transport chair. If it is absolutely necessary to do so, make sure the front casters are in the forward position. If you are picking an object up from the floor, go past the object, and then go backwards. The casters will then swing to the forward position. 3. Leaning out of the transport chair without proper assistance could cause tipping. 4. Do not step on the foot plates when transferring, as this could cause tipping. 5. Engage safety belt for added safety. 6. The transport chair should not be operated without the assistance of an attendant. 7. You and your attendant should consult a qualified professional for correct techniques on ramp negotiations. Warning Labels! PINCH POINT MOVING PARTS MAY CAUSE INJURY 6 USA

7 Assembly Assembly 1. To open the transport chair, tilt to one side and push down on seat rails (figure 1). 2. Lift back support to upright position. The lock to secure the back will engage automatically. (figure 2). To fold down and store, pull up on handles simultaneously, and carefully fold down the back support. 3. To attach footrests, align the holes on the footrest arm with the pegs on the frame of the transport chair, and swing footrest inward until locks engage (figure 3). 4. To adjust the length of the footrests, loosen the bolt on the telescoping tube shaft, adjust the footrest to the appropriate length, and tighten the bolt securely after adjustment (figure 4). 6. To remove the swing away footrests, release the lock, swing outward and rearward, and lift up and off to remove. 5. The safety belt is already attached for use and should not be removed from the transport chair. USA Figure 4 Figure 1 Figure 2 Figure 3 7

8 Operation Wheel Lock Operation 1. To engage the wheel locks, push the handles forward on each wheel lock until each lock is pressed against the wheel firmly (figures 5 & 6). To make sure the wheel locks are engaged properly, gently push on the hand grips to ensure the transport chair does not move. 2. To disengage the wheel locks, pull the handles on each wheel lock backwards until the lock is disengaged from the rear wheels. The transport chair should push freely with the hand grips without the locks engaged. Figure 5 Figure 6 8 USA

9 Operation Preparing To Sit 1. Make sure the front caster wheels are in the forward position before preparing to sit. 2. Engage both wheel locks on the rear wheels by pushing the handles forward on the wheel locks. To make sure the wheel locks are engaged properly, gently push on the hand grips to ensure the transport chair does not move. 3. Unlock the front riggings by releasing the lock on the side of each frame, and swing the front riggings to the outside of the frame. 4. Reach behind for the transport chair s armrests with both hands, and slowly lower yourself using your legs as much as you can (figure 7 & 8). 5. If you fall into the transport chair, try leaning a little more forward as you sit and bend your knees to lower yourself to the transport chair. Figure 7 Figure 8 USA

10 Operation Preparing To Stand 1. Make sure the front caster wheels are in the forward position before preparing to sit. 2. Engage both wheel locks on the rear wheels by pushing the handle on the wheel lock. To make sure the wheel locks are engaged properly, gently push on the hand grips to ensure the transport chair does not move. 3. Unlock the front riggings by releasing the lock on the side of each frame, and swing the front riggings to the outside of the frame. 4. Place both hands on the armrests of the transport chair, and lean forward until you feel some of your weight on your feet (figure 9). 5. Use your legs to sand as much as possibly, your arms should only lift what your legs cannot. Use your arms mostly to help keep your balance as you stand (figure 10). 6. Do no walk forward until you have tested your balance and you feel strong enough to walk. Figure 9 Figure USA

11 Operation Maintenance Proper care and maintenance is important in order to keep you transport chair in good working condition. Be sure that your transport chair is in proper working condition at all times. 1. At least once a week, wipe off frame using a clean soft cloth. If the transport chair is exposed to moisture, dry the transport chair immediately. 2. Clean the upholstery with a mild soap solution, rinse and wipe dry. Worn or torn upholstery should be replaced promptly as it may not support your body weight. 3. Inspect the wheels at least once a month. Correct any side play by loosening the lock nut on the axle, then tighten the axle just enough to remove side play. 4. Solid rubber tires require limited upkeep, but need to be cleaned periodically with a damp cloth. Solid rubber tires need to be replaced if they become cracked or severely worn. USA

12 Warranty Warranty Conditions Dear Customer, The ALDI warranty offers you extensive benefits compared to the statutory obligation arising from a warranty: Warranty period: 2 years from date of purchase Costs: Free repair/exchange or refund. No transport costs ADVICE: Please contact our service hotline by phone, or fax before sending in the device. This allows us to provide support in the event of possible operator errors. In order to make a claim under the warranty, please send us: together with the faulty item the original receipt and the warranty card properly completed. the product with all components included in the packaging. This warranty does not cover damage caused by: Accident or unanticipated events (e.g. lightning, water, fire). Improper use or transport Disregard of the safety and maintenance instructions Other improper treatment or modification After the expiry of the warranty period, you still have the possibility to have your product repaired at you own expense. If the repair or the estimate of cost is not free of charge you will be informed accordingly in advance. This warranty does not limit the statutory obligation of the seller arising from a warranty. The period of the warranty can only be extended in accordance with a legal standard. In countries where a (compulsory) warranty and/or spare part storage and/or a system for compensation are/ is required by law, the statutory minimum conditions apply. In the event that a product is received for repair, neither the service company nor the seller will assume any liability for data or settings possibly stored on the product by the customer. 12 USA

13 WARRANTY CARD ADJUSTABLE ROLLATOR Your details Name Address E mail Date of Purchase* We reccomend you keep the receipt with this warranty card Location of purchase Description of malfunction: If after contacting the manufacturer you are requested to return the faulty product please return the completed warranty card together with it MODEL: /2016 Drive Medical 99 Seaview Boulevard Phone lines available Port Washington, NY 11050, USA Monday to Friday, SERVICIO POSVENTA YEAR WARRANTY 13 USA

14 DISTRIBUTED BY DISTRIBUIDO POR: ALDI INC. BATAVIA, IL SERVICIO POSVENTA USA MODEL: /2016 YEAR WARRANTY AÑOS DE GARANTÍA