THREE POINT HITCH HAY RAKES P4-P5-P6

Transcription

1 OMUS01P4T-0212 THREE POINT HITCH HAY RAKES P4-P5-P6 OPERATOR'S MANUAL Tonutti Italy Factories Tonutti U.S.A. Tonutti Russia Via Gino Tonutti Remanzacco (UD) Italy Tel Fax info@tonutti.it Remanzacco (UD) Rivignano (UD) Vezzano (RE) Krasnokamsk (RU) Tonutti U.S.A Thomas Road Memphis, TN Phone (901) Fax (901) info@tonuttiusa.com Tonutti Wolagri Limited 3 Tekhnicheskaya Street Perm, Russia Phone 007 (3422) Fax 007 (3422) twltd@perm.ru

2 Patents This machine may be covered by one or more of the following patents: US Pat. # US Pat. # US Pat. # US Pat. # US Pat. # US Pat. # US Pat. # US Pat. # US Pat. # US Pat. # (Other U.S. and foreign patents pending.) Data shown on the machine identification plate Model: Year of fabrication: Serial number: Date of delivery: Dealer: Technical assistence centre authorised by «TONUTTI» to be contacted for all technical assistance needs TONUTTI SpA Remanzacco (UD)Italia -Via Gino Tonutti, 3 Tel Fax

3 Dear Customer, We wish to thank-you for having decided to purchase a Tonutti product and truly believe that you have made a wise choice. Tonutti CO. has invested a great deal of time and effort in developing its equipment and assures you efficient operation, durability and dependability. This manual has been specially designed to assist you to simplify the assembly procedure of this machine. Don t forget that there is a right and a wrong way to do everything and the performance of your machine depends largely on how well you read and understand this manual and apply the instructions. Carlo Tonutti General Manager If you have any questions to ask, please contact our customers service U.S. & CANADA EUROPE Phone # (901) Phone # Fax # (901) Fax # IMPORTANT NOTICE LEFT RIGHT REAR Determine the right or left side of the machine by viewing it from the rear.

4 Table of contents TABLE OF CONTENTS... 1 SAFETY MESSAGES SAFETY, I.D., MODEL DECALS... 6 ASSEMBLY RAKE ADJUSTEMENTS HOOKUP, TRANSPORT, UNHOOKING RAKING LUBRICATION AND MAINTENANCE RAKES SPECIFICATIONS RECOMMENDED TORQUE VALUES LIMITED GUARANTEE Assembly time: 1 h 01 P1-P4-P5-P6

5 Safety messages GENERAL CONDITIONS OF USE This implement has been designed and produced to move forage that has previously been cut and form windrows or turn the forage for airing if and when necessary. It is suitable as an implement for tractors of adequate horse power and weight. This machine may not be used for any other applications other then those mentioned above. The choice of the implement must be made within the limits accepted by the tractor manufacturer based on weight and dimensions as per the chart "Technical Specifications" to be found on page 21 of this manual. This implement does not have devices to switch off the tractor engine, therefore many safety functions are to be actioned on the tractor, which must comply with all safety regulations actually in force. This implement must be used only in adeguate day light or adeguate lighting must be supplied from the tractor directly onto the implement and its immediate surroundings. The operator of this implement must be in good physical and psychological conditions and in particular must be able to turn around freely to control that nobody is within 10 meters of the implement. The operator must always be in a position to switch off the tractor engine and disengage the PTO in the case of an emergency. When he starts working he must decide which is the quickest and easiest way to stop the tractor engine in case of an emergency. When working on inclined land adhere strictly to instructions given by the tractor manufacturer so as not to overturn the tractor. Anyhow, reduce the speed and manoeuvre with caution; work preferably from the top to the bottom or viceversa; make sure that there is adequate adhesion between the terrain and the tractor wheels. PARTS INTERCHANGEABILITY All TONUTTI rakes have standard parts that are interchangeable between them (wheels, arms, heads). The "2P" rakes has been designed so that the single "P" hay rakes can become a double "V" rake by simply adding a toolbar frame. This solution has the following advantages: If you already own a Tonutti hay rake model P4 - P5 - P6 all you have to do is purchase another rake of the same model, but a left hand rake and a toolbar frame and you have a "V" rake model 2P4-2P5-2P6. Owning a Tonutti "V" hay rake model 2P you have 2 rakes in one and can use as follows during working operations: You can rake with just the right hand rake if necessary You can rake with just the left hand rake if necessary You can rake with both the right hand and left hand rakes together 02 P1-P4-P5-P6

6 Safety messages BEWARE OF SAFETY INFORMATION This is the safety-alert symbol. This symbol placed on your machine or in the manual is used to alert you to the potential for personal injury or death. UNDERSTAND SIGNAL WORDS A signal word DANGER, WARNING, or CAUTION is used with the safety-alert symbol. Safety signs with signal word DANGER, WARNING, or CAUTION are located near specific hazards. DANGER - Imminent hazards which, if not avoided, will result in serious personal injury or death. WARNING - Potential hazards or unsafe practices which, if not avoided, could result in serious personal injury or death. CAUTIONS - Potential hazards or unsafe practices which, if not avoided, could result in minor personal injury or product or property damage. READ MANUALS Do not operate the machine unless the instructions in the following manuals have been carefully read and understood: * The Wheel Rake Operator s Manual * Tractor Operator s Manual FOLLOW INSTRUCTIONS Carefully read and understand all safety messages in this manual and on your machine safety decals. Safety decals located on your machine contain important information that will help you operate your equipment safely. Keep safety decals in good condition. Replace missing or damaged safety decals. Allow only responsible, properly instructed individuals to operate the machine. Carefully supervise inexperienced operators. 03 P1-P4-P5-P6

7 Safety messages PERSONAL PROTECTION Wear required personal protective equipment. Wear close fitting clothing and confine long hair. Avoid wearing jewellery, such as rings, wrist watches, necklaces, or bracelets. KEEP MACHINE IN GOOD CONDITION Be sure the machine is in good operating condition and that all safety devices are installed and are functioning properly. Visually inspect the machine daily before using the machine. Make no modifications to your equipment unless specifically recommended or requested by TONUTTI CO. REDUCE SPEED WHEN TOWING LOADS Be sure that the tractor is large enough to have adequate braking and steering control when towing implements that do not have brakes. Reduce speed if towed load without brakes weighs more than the tractor. Use additional caution when towing loads under adverse surface conditions, when turning, and on inclines. m.p.h KEEP SPECTATORS AWAY FROM MACHINE Keep all spectators and other workers away from the machine and work area while in operation or when raising and lowering the rake arms. 04 P1-P4-P5-P6

8 Safety messages NO RIDERS Be sure the tractor operator is the only person riding the tractor.do not allow riders on the machine. CHECK THE FIELD Be alert and use extreme caution when operating on hillsides or near ditches, gullies, holes, or obstructions where rollover could occur. Watch out for and avoid any object that might interfere with the proper operation of the machine. (i.e. stones and limbs). WARNING Disingage all power drives when making adjustments or repairing these particular pieces of equipment. WARNING ENTANGLEMENT POSSIBLE Contact with rotating tines could cause serious injury or death. Stay away. All machinery is particularly dangerous to children and persons that are unfamiliar with its general operation. The TONUTTI CO. strongly recommends that no person without a thorough understanding of how the TONUTTI wheel rakes operate be permitted to operate the machine. The machine should be operated only by responsible persons who have thoroughly read the operator s manual and are informed about the machine s use and are delegated to do so. Prior to operating the rake, be sure to read and understand this operator s manual. there is any portion you do not understand, or any phase of the machine s operation you do not understand, be sure to contact your local TONUTTI dealer or distributor. Use this manual thoroughly to familiarize yourself with the machine. 05 P1-P4-P5-P6

9 Safety and model decals INSPECTING SAFETY DECALS Safety decals located on your machine contain important and useful information that will help you operate your equipment safely.to assure that all decals remain in place and in good condition, follow the instructions given below. - Keep decals clean. Use soap and water, not mineral spirits,abrasive cleaners,or other similar cleaners,that will damage the decal. - Replace any damaged or missing decals. When attaching decals, surface temperature of the metal must be at least 40 F (5 C). The metal must also be clean and dry. - When replacing a machine component with a decal attached,replace the decal also. - Replacement decals can be purchased from your Tonutti equipment dealer. DECALS LOCATION 1) TWO PIECES 2) ONE PIECE 3) ONE PIECE P4/94 5) TWO PIECES 6) ONE PIECE 06 P1-P4-P5-P6

10 WARNING: PLEASE CHECK, BEFORE ORDENING THE P6 SERIES, THAT THE TRACTOR CAN LIFT UP THE RAKE IN TRANSPORT POSITION IN OBSERVANCE WITH THE CLEARANCE, AS SHOWN IN THE DRAWING, ABOUT THE DISTANCE FROM THE IMPLEMENT AND THE TERRAIN/ CABIN!!! 07 P1-P4-P5-P6

11 Assembly INSTALL WHEELS AND JACKSTAND 08 P1-P4-P5-P6

12 Assembly INSTALL PIVOT HEAD ASSEMBLY OPERATING WITH THE RAKE POSITIONING ON THE FLOOR, INSTALL THE HEAD ON THE THIRD POINT OF THE TRACTOR USING THE PROPERLY PIN (2) AND THE LINCH PINS OF THE TRACTOR. OUR RAKES HAVE D=22 PINS FOR THE CONNECTIONS ON THE TRACTOR, BUT ON REQUEST IS POSSIBLE HAVE THE BUSHES TO ADAPT THE PINS TO D=28. - LIFT THE FINGER WHEELS ARM FROM THE FLOOR BY MOVING THE THIRD POINT; - TURN OFF THE ENGINE OF THE TRACTOR; - TAKE OFF THE LINCH PIN (4) AND INSTALL THE LOCK (3) AS SHOWN IN THE PICTURE TO HAVE THE POSSIBILITY TO MOVE THE FINGER WHEEL ARM IN FRONT OF THE HEAD. THIS POSITION IS USED WHEN THE RAKE IS IN THE WORKING PHASE. IN THE TRANSPORT PHASE USE THE SECOND HOLE TO LOCK THE ARM. THE HANDLE (5) IS USED TO POSITIONING THE RAKE IN DIFFERENT POSITIONS OF TRANSPORT/WORKING. 09 P1-P4-P5-P6

13 Assembly INSTALL PIVOT HEAD ASSEMBLY INSTALL THE PINS FOR THE CONNECTION TO THE THIRD POINT (6) TO THE FRAME (1) AND FIX WITH LINCH PINS (13). CONNECT THE ASSEMBLY FRAME TO THE THIRD POINT OF THE TRACTOR AND LIFT UP. TURN OFF THE ENGINE OF THE TRACTOR. INSTALL THE BRACKETS (3) AND THE PLATES (4) WITH THE SCREWS M12x140 (7) AND NUTS M12 (8) IN THE LOWER PART OF THE ASSEMBLY FRAME, AS POSSIBLE ON THE MAXIMUM SIDE. PUT THE BOLTS ON THE BRACKETS (2) IN THE UPPER SIDE OF THE ASSEMBLY FRAME. THE BOLTS OF THE BRACKETS MUST BE NOT COMPLETLY TIGTH TO HAVE THE POSSIBILITY TO MAKE ADJUSTING DURING THE ASSEMBLY OF THE RAKE. 10 P1-P4-P5-P6

14 Assembly INSTALL HYDRAULIC CYLINDER AND LIFT LINKS ASSEMBLY NOW THE HEADS OF THE RAKES (1) AND LOCK WITH THE PROPERLY PINS, (2) AND THE HAIR PIN (3). FINALLY TIGHT THE BOLTS. ASSEMBLY NOW THE OTHER PARTICULARS AS IN THE CONDITIONS OF TWO SINGLE RAKES BUT BE CAREFUL TO INSTALL THE RIGHT RAKE INTO THE RIGHT SIDE OF THE FRAME AND THE LEFT RAKE TO THE LEFT SIDE. 11 P1-P4-P5-P6

15 Rake adjustments ADJUSTMENTS CAUTION: Before proceeding to make any adjustments on the finger wheel rake, be sure to place the tractor transmission in park and/or lock the brakes, to shut off the engine and, to remove the ignition key and take it with you before leaving the tractor seat. GROUND PRESSURE NOTE: Proper finger wheel pressure on the ground is an important factor for achieving clean raking. Too much pressure will cause undue stress on the finger wheel tines and cause unnecessary dirt and thrash to be brought into the windrow. Finger wheel to ground pressure is a factor of how far the tractor lower links descend. Some tractors are equipped with a control lever down-stop to limit the lever travel. On tractors which do not have this type of limit stop, limit chains should be purchased separately and used to prevent exceeding the predetermined lower travel limit. Limit chains may also be useful for tractors with faulty hydraulic system that leak-down when hydraulic system power is removed. Arm Moveable Head Moveable Head Pin Main Frame Transport (storage) Latch 12 P1-P4-P5-P6

16 Hookup, transport, unhooking TRANSPORTING - Before transporting the rake, clean out any crop and chaff that has become trapped between the rake tines and the frame.then raise into the transport position. WARNING: Serious injury or death could occur if rake arms collide with vehicles or fixed objects during transport. UNHOOKING WARNING: Use the Normal Shutdown Procedure section when unhooking Implement. Park the implement on level ground. Lower implement. Prepare implement for season storage : - Remove dirt and crop from implement. Paint exposed metal to inhibit rusting. - Lubricate grease points on the machine. - Coat exposed hydraulic cylinder rod(s) with grease to prevent rusting. - Check hydraulic hoses for deterioration and replace if necessary. - Tighten any loose bolts, nuts and hydraulic fittings. - Repair or replace worn or broken parts. - Replace damaged or missing decals. 13 P1-P4-P5-P6

17 Raking RAKING NOTE: Before attempring to operate eighter model Rake, BE SURE that the Transport (Storage) Latch is disengaged. Normally the finger wheels are all positioned to overlap each other as shown. The cut material is raked from right to left. The main frame can be adjusted to any one of three positions to obtain three different raking widths as well as to accomodate different crop and field conditions. After the desired width is estabilished, BE SURE to fix the adjusted position by installing the moveable head pin and locking it with the hair pin cotter pin. As necessary, readjust the ground pressure per the proceding information. DIFFERENCE BETWEEN LEFT AND RIGHT "P" RAKES Left "P" rake creates windrow on the right. Right "P" rake creates windrow on the left. 14 P1-P4-P5-P6

18 Raking SPREADING NOTE: Before attempring to operate eighter model Rake, BE SURE that the Transport (Storage) Latch is disengaged. In a spreading operation, the finger wheels move the crop from right to left separately. In wide swaths, four (for the model P4) or five (for the model P5) smaller widths windrows can be formed from two (or three) large windrows in a single pass. As conditions permit, four or five small swaths can also be spread into four or five small windrows respectively. Most spreading operations are carried-out with the rake width adjusted to positions 1 or 2. NOTE: If it becomes difficult to get the crop out of the rake, reduce the width of the rake by locating the arm in a different hole position in the moveable hesd. ALWAYS drive the tractor and operate the rake in the appropriate direction which enables the finger wheels to work the tops of the crops first. 15 P1-P4-P5-P6

19 Raking TURNING Note: The following information applies mainly to the P4 finger wheel model. The model P5 can also be used for turning however, the center finger wheel will form a narrower windrow that the pairs of finger wheels on both ends. NOTE: Before attempring to operate eighter model Rake, BE SURE that the Transport (Storage) Latch is disengaged. In the turning operations, the arm is set in position 1 or 2 of the moveable head so that two swaths can be turned at the same time. This process is normally used right after the crop has been spread. Note: ALWAYS drive the tractor and operate the rake in the appropriate direction which enables the finger wheel to work the bottoms of the crop first. 16 P1-P4-P5-P6

20 Raking ON THE FIELD WITH THE "V RAKE" SPREADING Rotate the main frame and its arms to the right. Lock with the pins. RAKING Rotate the main frame and its arms to the left. Lock with the pins. TURNING Rotate the main frame to the right and the arms to the left. Lock with the pins. 17 P1-P4-P5-P6

21 Raking DIRECTION OF TRAVEL Raking direction will effect leaf loss and bale formation. For sickle mowed crop, rake in the same direction as mower travel. For rotary mowed crop, rake in opposite direction as mower travel Experimentation may be necessary for best bale formation RAKING SPEED Optimum ground speed will depend on crop being raked, terrain, and tractor horsepower. Reduced ground speed may be necessary for hills or rough terrain. Inexperienced operators should use slower ground speeds and avoid rough or uneven terrain which could lead to tractor tipping or rollover. TROUBLESHOOTING Most raking problems can be traced to travelling too slow or too fast, incorrect ground pressure, or broken or missing tines. Increase ground pressure only enough to pick up crop. 18 P1-P4-P5-P6

22 Raking WORKING WIDTH NOTE: Windrow widths (A) and (B) are approximate. The working width and windrow width will vary according to the type and quantity of crop being raked. The distance between hoops on rear raking wheels can be used to determine basic windrow width. Actual width depend on crop type, volume, and raking speed. When adjusting with turnbuckle, working width will change. The V-rake models 2P4 2P5 and 2P6 have been studied especially for big balers, therefore, obtaining from these machines the maximum performance possible. In fact, the two single rakes have been attatched to the tool bar frame by means of plates and brackets that can slide horizontally, thusly increasing or diminuishing the working width. WINDROW WIDTH (A) WORKING WIDTH 2P4 WHEEL RAKE (B) 5,45 m (18'2") WORKING WIDTH 2P5 WHEEL RAKE (B) 6,70 m (22'4") WORKING WIDTH 2P6 WHEEL RAKE (B) 8,44 m (28'2") 1,20 TO 1,80 m (4' TO 6') 19 P1-P4-P5-P6

23 Raking RAKING PROBLEMS Problem Cause Solution Field not cleaned well Rake wheel assemblies too Adjust assemblies lower to high ground Hay is bunching Tips of teeth collecting dirt Remove paint and dirt from tips of teeth Incorrect ground speed Adjust ground speed Rake wheel hoops Excessive ground speed Reduce ground speed breaking Excessive ground pressure Reduce ground pressure Tines breaking Excessive ground speed Reduce ground speed Excessive ground pressure Reduce ground pressure One rake wheel does Inadequate lubrication Lubricate adequately not turn Worn or damaged bearing Replace bearing Poor windrow Rake wheel assemblies too Adjust assemblies lower to preparation high ground Broken or missing tines Excessive ground speed Replace tines Reduce ground speed Excessive ground pressure Reduce ground pressure Rake wheel assembly Rake wheel assembly too Adjust assembly lower to on one side does not high ground turn Broken or missing tines Replace tines 20 P1-P4-P5-P6

24 Lubrication and maintenance LUBRICATION AND MAINTENANCE MAINTENANCE - 10 SERVICE HOURS After the first hours of operation, check all attaching hardware. All hardware torques should be checked on a routine basis after every 10 hours of operation. MAINTENANCE - AS REQUIRED Periodically inspect rake and make necessary repairs. - Check frame for fatigue or cracking. Replace or repair worn or damaged parts. - Check decals. replace if missing or damaged. - Check bolts and fasteners. Tighten or replace as necessary. - Check rims for damage. - Check lug nut torque. torque to 85 ft lb (115 nm). - Check condition of rake wheels. CHECK WHEEL BEARINGS Yearly, or if tine wheel bearings do not turn freely, check bearing grease. INSPECT BEARING 1- Remove dust cap (1), locking nut (2), and washer and outer bearing (3). 2 - Inspect bearing: if it is dry, or if grease is caked or contaminated, repack bearings; otherwise go to step 8. REPACK BEARING 3- Remove wheel and hub. Remove and inspect seal (5). Replace if damaged. 4- Remove the inner bearing (4). 5- Wash bearings and inside of hub with solvent. Wipe clean and air dry. Replace damaged bearings or races. 6- Work grease into roller retainers from edge to fill the entire bearing with grease. 7- Install inner bearing (4), seal (5), into hub and mount on spindle. PRELOAD BEARING 8- Install outside bearing and washer (3) install nut (2). 9- Tighten nut until slight drag is felt when turning wheel. Back off nut 1/8-1/4 turn (locknut type). Install dust cap (1). 10- Install wheel and torque nuts or bolts. 21 P1-P4-P5-P6

25 Specifications SPECIFICATIONS MODEL NUMBER KW HP LBS KG FEET CM P2 T ' 250 P3 T '8" 320 P '7" 140 P '4" 220 P6 6 22, '4" 220 2P4 8 26, '8" 320 2P , ' 420 2P , ' 420 MODEL MPH KMH INCH CM FEET CM P2 T " 140 4' 122 P3 T " 140 6' 183 P " 140 7'7" 228 P " 140 9'5" 282 P " '7" 347 2P " '2" 545 2P " '4" 670 2P " '2" P1-P4-P5-P6

26 Recommended torque values RECOMMENDED TORQUE VALUES For Metric Grade 5.8,6.9,10.9,& 12.9 Cap Screws and Bolts All values are ft. lbs. BOLT SIZE GRADE 5.8 GRADE 6.9 GRADE 8.8 GRADE 10.9 GRADE 12.9 FT. Newton FT. Newton FT. Newton FT. Newton FT. Newton LBS. Meters LBS. Meters LBS. Meters LBS. Meters LBS. Meters M M M M M M M M M M M M M M M P1-P4-P5-P6

27 Note:...

28 LIMITED WARRANTY ************************** TONUTTI SPA (HEREINAFTER MANUFACTURER ), WARRANTS TO THE ORIGINAL PURCHASER OF EACH NEW AGRICULTURAL PRODUCT OF ITS OWN MANUFACTURE ( PRODUCT ) THAT SUCH PRODUCT SHALL BE FREE FROM DEFECTS IN MATERIAL AND/OR WORKMANSHIP, WHEN PROPERLY SET UP AND OPERATED IN ACCORDANCE WITH THE RECOMMENDATIONS SET FORTH IN THE PRODUCT S OPERATOR S MANUAL, FOR ONE FULL YEAR AFTER DELIVERY TO THE ORIGINAL PURCHASER. THIS LIMITED WARRANTY SHALL APPLY ONLY TO COMPLETE MACHINES. THE TONUTTI PRODUCT WILL QUALIFY FOR THE TONUTTI LIMITED WARRANTY ONLY IF THE ON LINE WARRANTY REGISTRATION HAS BEEN SUBMITTED WITHIN 10 (TEN) DAYS FROM THE DATE OF PURCHASE. RECEIPT OF WARRANTY REGISTRATION AFTER THE 10 (TEN) DAYS FROM PURCHASE WILL AUTOMATICALLY INVALIDATE THE WARRANTY PARTS AND ACCESSORIES NOT OF TONUTTI S MANUFACTURE ARE WARRANTED ONLY TO THE EXTENT OF THEIR ORIGINAL MANUFACTURER S WARRANTY AND SUBJECT TO THEIR ALLOWANCE TO TONUTTI IF FOUND DEFECTIVE. DURING THE WARRANTY PERIOD, THE AUTHORIZED TONUTTI DEALER SHALL FURNISH REPLACEMENT COMPONENT PARTS WITHOUT CHARGE FOR ANY PRODUCT THAT FAILS BECAUSE OF DEFECTS IN MATERIAL AND/OR WORKMANSHIP. NO PRODUCTS OR COMPONENT PARTS SHALL BE REPAIRED,REPLACED OR RETURNED WITHOUT PRIOR WRITTEN AUTHORIZATION FROM TONUTTI SPA. THE SOLE AND EXCLUSIVE REMEDY AGAINST THE MANUFACTURER DURING THE WARRANTY PERIOD WILL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRDOUCTS IN THE MANNER PROVIDED UNDER THIS WARRANTY. IN NO EVENT SHALL THE MANUFACTURER S LIABILITY EXCEED THE PURCHASE PRICE OF THE PRODUCT. THE MANUFACTURER SHALL NOT BE LIABLE TO ANY PERSON UNDER ANY CIRCUMSTANCES FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS) OCCURING FOR ANY REASON AT ANY TIME. THIS LIMITED WARRANTY DOES NOT OBLIGATE THE MANUFACTURER TO BEAR ANY TRANSPORTATION CHARGES IN CONNECTION WITH THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS. THE MANUFACTURER SHALL NOT BE OBLIGATED FOR ANY CHARGES FOR LABOR OR OTHER COSTS INCIDENTAL TO THE REMOVAL OR REMOUNTING OF COMPONENT PARTS REPAIRED OR REPLACED UNDER THIS LIMITED WARRANTY. THIS WARRANTY SHALL NOT APPLY TO ANY MACHINE WHICH SHALL HAVE BEEN REPAIRED OR ALTERED OUTSIDE THE TONUTTI FACTORY WITHOUT PRIOR MANUFACTURER S APPROVAL, TO AFFECT ITS STABILITY OR RELIABILITY, NOR WHICH HAS BEEN SUBJECT TO MISUSE, NEGLIGENCE OR ACCIDENT, NOR TO ANY MACHINE WHICH SHALL NOT HAVE BEEN OPERATED IN ACCORDANCE WITH THE MANUFACTURER S PRINTED INSTRUCTIONS OR BEYOND THE COMPANY RECOMMENDED MACHINE RATED CAPACITY. THIS WARRANTY SHALL NOT BE APPLICABLE TO ITEMS WHICH ARE SUBJECT TO THE WARRANTIES OF THEIR RESPECTIVE MANUFACTURERS. SUCH ITEMS WOULD INCLUDE BUT WOULD NOT BE LIMITED TO CLUTCHES, UNIVERSAL JOINTS, KNIVES, HYDRAULIC COMPONENTS, BEARINGS, TIRES, BELTS AND OTHER TRADE ACCESSORIES. THIS WARRANTY SHALL NOT BE APPLICABLE TO ITEMS DEFINED AS NORMAL WEAR ITEMS. SUCH ITEMS INCLUDE, BUT ARE NOT LIMITED TO BELTS, DISCS, KNIVES, TINES, STONE GUARDS, TIRES, SLIP CLUTCHES, PITMAN SHAFTS, SWATH STICKS, BLADES, TINE HOLDERS. THE JUDGEMENT OF TONUTTI S.P.A. IN ALL CASES OF CLAIMS UNDER THIS WARRANTY SHALL BE FINAL AND CONCLUSIVE AND THE ORIGINAL PURCHASER AGREES TO ACCEPT ITS DECISION ON ALL QUESTIONS AS TO DEFECT AND TO THE EXCHANGE OF ANY PART OR PARTS. NO AGENT, EMPLOYEE OR REPRESENTATIVE OF TONUTTI S HAS ANY AUTHORITY TO BIND TONUTTI TO ANY AFFIRMATION REPRESENTATION OR WARRANTY CONCERNING ITS MACHINERY EXPECT AS SPECIFICALLY SET FORTH. TONUTTI SPA RESERVES THE RIGHT TO MODIFY,ALTER AND IMPROVE ANY PRODUCT WITHOUT INCURRING IN ANY OBBLIGATION TO REPLACE ANY PRODUCT PREVIOUSLY SOLD WITH SUCH MODIFIED,ALTERED OR IMPROVED PRODUCT P1-P4-P5-P6

29 FARM MACHINERY INDUSTRIES Via Gino Tonutti, Remanzacco (Italy) Phone Fax web site: VERY IMPORTANT!!!!!!!!!! WARRANTY REGISTRATION INFORMATION Dear Customer, In order to validate the Warranty Registration of your Tonutti implement that you have just purchased, please surf in the internet at our web site On line Warranty Policy (W.O.P.) section and be sure to fill in the Warranty Registration Form found therein, in all its details. If by any chance you do not have an internet connection, please ask your dealer to complete the form for you and forward, by or fax to Tonutti. PLEASE DON T FORGET THAT THIS REGISTRATION FORM MUST BE SUBMITTED WITHIN 10 DAYS OF THE PURCHASE IN ORDER TO BE COVERED BY TONUTTI LIMITED WARRANTY POLICY. Remanzacco, February 10th, 2009

30 [Limited Warranty Policy] [Online Warranty Registration] Online Warranty Registration [Online Warranty Claim] Dear Dealer, thank you for dealing in Tonutti products. Please fill out this form to register the sale of a Tonutti product. This will ensure that your sale has been registered and that the warranty will be activated as of the purchase date. Registering the warranty online is fast and easy. You can also register in the following way: Fax your completed Registration form to Tonutti Customer Care To the Dealer: By completing and submitting this Warranty Registration form within 10 days from purchase date, you confirm that: 1. The machine has been correctly assembled in accordance with the manufacturer's instructions. 2. All bolts have been checked and also oil level and grease. 3. All safety guards + warning decals have been placed on machine. 4. PTO has been matched to tractor and greased. 5. All other pre-delivery checks have been completed as per operators manual. 6. Purchaser was given operators manual and instructed in safe and correct usage of the machine and on limitation of warranty. 7. Machine was tested and operates correctly. 8. The Purchaser acknowledged the machine's correct assembly. 9. The Purchaser acknowledged the receipt of the operators manual, read and fully understood its content. 10.The Purchaser acknowledged his understanding and approves Tonutti Limited Warranty Policy 11.The Purchaser acknowledged having a clear understanding on the correct and safe operation of the machine. 12.The Purchaser acknowledged that the machine needs regular maintenance. as per instructions in the operators manual. 13.The Purchaser has a clear understanding of the capacity of the machine and is aware of its limitations. First Name of person filling out registration* Last Name of person filling out registration* MARIO ROSSI Required Fields marked with* Firm* Date of purchase* ABCDE DD MM YY Address* City* ZIP Code * VIA ARTIGIANO SAN VALENTINO State/Province* UDINE Country* ITALY My Contact is: Phone* Fax * info@abcde.it Product model * Serial number* DOMINATOR V Purchaser Name* Purchaser address* Purchaser information to be completed by the Dealer GIOVANNI BIANCHI VIA GORIZIA,10 UDINE/ITALY Submit

31 33047 Remanzacco (UD) Italy - Via Gino Tonutti, 3 Tel Fax ENGLISH Declaration of Conformity with 98/37/CE We declare, accepting full responsibility for this declaration, that this product conforms with the following European standards: 2006/42/CE. To achieve machine conformity the following Harmonized Standards have been utilized: UNI EN ISO :2009, UNI EN ISO :2009, UNI EN 1553, UNI EN ISO National and International Technical Specifications : ISO 11684, DPR 547/55 DEUTSCH Konformitätserklärung 98/37/CE Wir erklären und übernehmen die volle Verantwortung für diese Erklärung, dass das Produkt folgenden europäischen Normen entspricht: 2006/42/CE. Zum Anpassen der Maschine an diese Norm wurden folgende angeglichenen Normen angewandt: UNI EN ISO :2009, UNI EN ISO :2009, UNI EN 1553, UNI EN ISO Internationale und Nationale technischen Spezifikationen: ISO 11684, DPR 547/55 FRANÇAIS Déclaration de Conformité 98/37/CE Nous déclarons, et nous assumons la pleine responsabilité de cette déclaration, que le produit est conforme aux normes européennes suivantes: 2006/42/CE. Pour l adaptation de la machine, nous avons utilisé les Normes Harmonisées suivantes: UNI EN ISO :2009, UNI EN ISO :2009, UNI EN 1553, UNI EN ISO Spécifications techniques natinales et internatinales : ISO 11684, DPR 547/55 ITALIANO Dichiarazione di Conformità 98/37/CE Dichiariamo, assumendo la piena responsabilità di tale dichiarazione, che il prodotto è conforme alla seguente direttiva europea: 2006/42/CE. Per l adeguamento delle macchine sono state utilizzate le seguenti Norme Armonizzate: UNI EN ISO :2009, UNI EN ISO :2009, UNI EN 1553, UNI EN ISO Norme e/o Specifiche Tecniche Nazionali ed Internazionali : ISO 11684, DPR 547/55 ESPAÑOL Declaración de Conformidad 98/37/CE Declaramos, asumiéndonos la responsabilidad plena de tal declaración,que el producto es conforme a las siguientes normas europeas: 2006/42/CE. Para la adecuación de la máquina se han utilizado las siguientes Normas Armonizadas: UNI EN ISO :2009, UNI EN ISO :2009, UNI EN 1553, UNI EN ISO Especificaciones Técnicas Nacionales e Internacionales : ISO 11684, DPR 547/55 Type HAY RAKE Serian Number DECAL CE ON THE MACHINE Model P4-P5-P6 Date

32 33047 Remanzacco (UD) Italy - Via Gino Tonutti, 3 Tel Fax