Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N

Size: px
Start display at page:

Download "Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N"

Transcription

1 Report consists of 9 test reports. ARDI S.P.A. VIA ARSO CHIAMPO (VI) Defects before testing: one Sample name: OMEGA SAMPLE Overall dimensions: 690 x 1700 x 900 (h) mm List performed tests: 1. Outdoor furniture - General safety requirements E 581-1: Instruction for use E 581-2:2009, clause 7 3. Loungers- seat and back static load test E 581-2:2009, clause B Loungers: seat and back static load test - reclining back rest E 581-2: Loungers. Seat fatigue test E 581-2:2009, clause B Loungers. Seat and back fatigue test. Reclining back rest E 581-2: Loungers. Multi-position back rest: fatigue test E 581-2:2009, clause B Loungers. Seat impact test E 581-2:2009, clause B Loungers. Stability E 581-2:2009, clause B.3 Page 1 of 2

2 Sample weight: ot determined Sample name: OMEGA SAMPLE Side view Rear view Bottom view report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be Page 2 of 2

3 / 1 Date of test: 24/04/15 ARDI S.P.A.! Outdoor furniture - General safety requirements E 581-1: Edges and corners of parts which are directly contactable: Requirement Observed Edges and corners rounded and chamfered Yes one 5.1 Edges and corners of accessible parts: Requirement Observed Absence of sharp edges and burrs Yes one 5.2 Tubulars, holes and gaps accessible during use: Requirement Capped holes and gaps if dimensions are 7 and" 12 mm with depth 10 mm tested with probe" as specif. at point 4, applying 30 force Observed Yes one Bottom of tubulars capped or plugged Yes one 5.3 Shear and squeeze points: Requirement Absence of shear and squeeze points," created by powered mechanisms Observed Mechanism not" present one Absence of shear and squeeze points," created by loads during normal use Yes one Conformity to clause 5 of standard E 581-1:2006: YES

4 / 2 Date of test: 15/05/15 ARDI S.P.A.! Instruction for use E 581-2:2009, clause 7 Instructions for use E 581-2:2009, clause 7 General, clause 7.1 Statement checked Shall be provided in the language of the country where the! chairs are sold. Shall be headed "IMPORTAT, RETAI FOR FUTURE! REFERECE: READ CAREFULLY" in letters no less than! 5 mm high. Italian language Present This instructions shall include at least the following: Statement checked a) ame and address of the producer (manufacturer or supplier). Present b) Information regarding maintenance. Present! c) Conditions for use of the product (camping, domestic or contract) Present Marking for mobile loungers, clause 7.2 Statement checked All mobile loungers not intended to be lifted and moved under! load shall be marked with a pictogram. Present Conformity to clause 7 of standard of E 581-2:2009: YES

5 / 3 Date of test: 24/04/15 ARDI S.P.A.! Loungers- seat and back static load test E 581-2:2009, clause B Seat and back static load test clause B of E 581-2:2009 Points of application: FB1, D, E Load on! FB1! Back! Load on! FB2! umber of! cycles Time of! application sec o defects min o defects

6 / 4 Date of test: 24/04/15 ARDI S.P.A.! Loungers: seat and back static load test - reclining back rest E 581-2:2009 Seat and back static load test, clause B of E 581-2:2009 Back rest incliantion: 18 Points of application: FB1, D, E Load on! FB1! Back rest! Load on! FB2! umber of! cycles Time of! application sec o defetcs min o defects

7 / 5 Date of test: 24/04/15 ARDI S.P.A.! Loungers. Seat fatigue test E 581-2:2009, clause B Seat and back fatigue test E 581-2:2009, clause B Seat fatigue test E 581-2:2009, clause B Vertical! umber of! cycles! per point o defects Total cycles:

8 / 6 Date of test: 27/04/15 ARDI S.P.A.! Loungers. Seat and back fatigue test. Reclining back rest E 581-2:2009 Seat and back fatigue test E 581-2:2009, clause B Test method: E 1728:2000, clause 6.9 Bending moment applied to the back: 100 m Back rest inclination: 18 Seat! Back! Back rest! position umber of! cycles Vertical o defects Reclining o defects Total cycles:

9 / 7 Date of test: 06/05/15 ARDI S.P.A.! Loungers. Multi-position back rest: fatigue test E 581-2:2009, clause B Multi-position back rest: fatigue test, clause B Bending moment applied to the back: 100 m Mass on! the seat! kg Back! umber of! cycles on defetcs

10 / 8 Date of test: 13/05/15 ARDI S.P.A.! Loungers. Seat impact test E 581-2:2009, clause B Seat impact test E 581-2:2009, clause B Test method: E 1728:2000, clause 6.15 Mass of! impact! kg Height! of drop! mm umber of! impacts! per point o defects

11 / 9 Date of test: 28/05/15 ARDI S.P.A.! Loungers. Stability E 581-2:2009, clause B.3 Stabiliy E 581:2009, clause B.3 Sideways stability, clause B Loungers with arm rests: Force in Fb4: Force in Fb5: Time of application: sec : / Loungers without arm rests: Force in Fb4: 600 Time of application: 5 sec : The lounger does not overbalance Forward stability, clause B Force in Fb6: Time of application: sec : The lounger does not overbalance

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N Report consists of 11 test reports. Defects before testing: one Sample name: RELOAD chair SAMPLE 213402 Overall dimensions: 580 x 560 x 790 (h) mm List performed tests: 1. Safety requirements E 16139:2013+AC:2013

More information

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax Date received: 11/07/14 Date of issue: 02/09/14 CERATOLA S.P.A. VIA GIORGIOE 2-ZOA ID.LE 31037 RAMO DI LORIA (TV) Report consists of 11 test reports. Defects before testing: one Sample name: REVOLUTIO

More information

TEST REPORT N

TEST REPORT N centro ricerche-sviluppo e laboratori prove Date received: 21-12-11 Date of issue: 10-01-12 ILPO S.P.A. VIA FRIULI 1-3 - OSTERIA GRADE 40024 CASTEL SA PIETRO TERME (BO) Report consists of 11 test reports.

More information

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N 33048 S. Giovanni al at. UD Date received: 30/04/15 Date of issue: 16/06/15 Report consists of 11 test reports. METALMECCAICA ALBA S.R.L. 31020 SA ZEOE DEGLI EZZELII (TV) Defects before testing: one Sample

More information

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N

Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax SAMPLE N Report consists of 7 test reports. CERATOLA S.P.A. VIA GIORGIOE 2-ZOA ID.LE 31037 RAMO DI LORIA (TV) Defects before testing: one Sample name: COZY swivel chair SAMPLE 180511 Overall dimensions: 660 x 660

More information

TEST REPORT N

TEST REPORT N centro ricerche-sviluppo Date received: 05-10-10 Date of issue: 25-11-10 Report consists of 10 attached sheets. Defects before testing: one Sample name: SHIY 121264 Overall dimensions: 750 x 750 x 1060

More information

Test Report No.: AJD Date: NOV.05, 2013 Page: 1 of 5

Test Report No.: AJD Date: NOV.05, 2013 Page: 1 of 5 Test Report No.: AJD201307381 Date: NOV.05, 2013 Page: 1 of 5 HR FURNITURE CO., LTD SHANGJIABAO ECONOMICAL DEVELOPMENT ZONE, SHENGFANG TOWN, BAZHOU, HEBEI, CHINA The following sample(s) was / were submitted

More information

Length: 895 mm Width: 1355 mm Height: 705 mm

Length: 895 mm Width: 1355 mm Height: 705 mm HAY/Nine United Denmark A/S Havnen 1 DK-8700 Horsens Page 1 of 1 Appendices 3 Initials laha/prni/hbs Test Report Material: Model: Palissade Lounge Sofa also covers Palissade Lounge Chair High and Palissade

More information

page 1/6 EN 16139:2013, test severity level 1 The sample submitted for test fulfils the requirements in above mentioned standards.

page 1/6 EN 16139:2013, test severity level 1 The sample submitted for test fulfils the requirements in above mentioned standards. page 1/6 and Verification Center Article: requested by: Neolite, armrests sledge Jan Jismyr Material AB Tranås Sweden s are carried out according to standard: Discrepancies: Result and observations: EN

More information

Contact person Date Reference Page Michael Lindblad F000833F 1 (1) Sustainable Built Environment

Contact person Date Reference Page Michael Lindblad F000833F 1 (1) Sustainable Built Environment issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-06-25 5F000833F 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Martela AB

More information

page 1/5 EN 16139:2013, test severity level 1

page 1/5 EN 16139:2013, test severity level 1 page 1/5 and Verification Center Article: requested by: Jan Jismyr Material AB Tranås Sweden s are carried out according to standard: Discrepancies: Result and observations: EN 16139:2013, test severity

More information

Contact person Date Reference Page Michael Lindblad F025884B 1 (1) Sustainable Built Environment

Contact person Date Reference Page Michael Lindblad F025884B 1 (1) Sustainable Built Environment issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-05-09 5F025884B 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC

More information

Contact person Date Reference Page Michael Lindblad F025884A 1 (1) Sustainable Built Environment

Contact person Date Reference Page Michael Lindblad F025884A 1 (1) Sustainable Built Environment issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-05-09 5F025884A 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC

More information

Contact person Date Reference Page Michael Lindblad F013838C 1 (1) Sustainable Built Environment

Contact person Date Reference Page Michael Lindblad F013838C 1 (1) Sustainable Built Environment issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-09-17 5F013838C 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Johanson Design

More information

Internrapport

Internrapport page 1/5 and Verification Center Internrapport 17-10182 Article: requested by: Jan Jismyr Materia AB Tranås Sweden s are carried out according to standard: Discrepancies: Result and observations:, test

More information

page 1/5 EN 16139:2013, test severity level 1 Manager Kinnarps Test- & verification Center

page 1/5 EN 16139:2013, test severity level 1 Manager Kinnarps Test- & verification Center page 1/5 and Verification Center Article: requested by: Jan Jismyr Materi AB Tranås Sweden s are carried out according to standard: Discrepancies: Result and observations:, test severity level 1 This European

More information

TEST REPORT FOR: Product Design Group Fuze T50 Manual Wheelchair (204 kg / 450 lb)

TEST REPORT FOR: Product Design Group Fuze T50 Manual Wheelchair (204 kg / 450 lb) TEST REPORT FOR: Product Design Group Fuze T50 Manual Wheelchair (204 kg / 450 lb) REFERENCED DOCUMENTS ISO7176-1:1999, ISO7176-3:2003, ISO7176-5:2008 ISO7176-7:1998, ISO7178-8:1998, ISO7176-13:1989, ISO7176-15:1996,

More information

Page 1(5) Quality department P.O. Box 22 TEST REPORT 579/16 FIN Nummela Finland

Page 1(5) Quality department P.O. Box 22 TEST REPORT 579/16 FIN Nummela Finland Page 1(5) Product Logic 300 Test requested by Test specimen Test method, Takkatie 1, 00370 Helsinki Seat shell: Polyamide + foam Back rest: Polyamide + foam Arm rest: Polyamide Legs: Steel + aluminium

More information

Contact person Date Reference Page Ulf Lemke F015337C 1 (4) Wood Technology

Contact person Date Reference Page Ulf Lemke F015337C 1 (4) Wood Technology issued by an Accredited Testing Laboratory Contact person Ulf Lemke 2013-08-12 3F015337C 1 (4) Wood Technology +46 10 516 50 32 ulf.lemke@sp.se 1002 ISO/IEC 17025 Johanson Design AB Anders Anderssons väg

More information

Contact person Date Reference Page Hans Eriksson F000838G 1 (4) Wood Technology

Contact person Date Reference Page Hans Eriksson F000838G 1 (4) Wood Technology issued by an Accredited Testing Laboratory Contact person Hans Eriksson 2015-03-26 5F000838G 1 (4) Wood Technology +46 10 516 54 28 hans.eriksson@sp.se 1002 ISO/IEC 17025 Nordic Comfort Products A/S P.O.

More information

TEST REPORT FOR: Product Design Group Inc. Elevation Manual Wheelchair 115 kg, 253 lb

TEST REPORT FOR: Product Design Group Inc. Elevation Manual Wheelchair 115 kg, 253 lb TEST REPORT FOR: Product Design Group Inc. Elevation Manual Wheelchair 115 kg, 253 lb REFERENCED DOCUMENTS ISO7176-1:1999, ISO7176-3:2003, ISO7176-5:2008, ISO7176-7:1998, ISO7176-8:1998, ISO7176-13:1989

More information

: Metta Company : FLTSSP _07. : Swiss Approval Furniture Laboratory. : Elefsis, Attica Greece

: Metta Company : FLTSSP _07. : Swiss Approval Furniture Laboratory. : Elefsis, Attica Greece Holder Manufacturer : Metta Company : Metta Company Test Item : Office work chair model SAMURAI S-1 Identification : FLTSSP-161118_07 Condition of delivery : Date of delivery : 18/11/2016 Testing laboratory

More information

Contact person Date Reference Page Ulf Lemke F027196A 1 (4) Wood Technology

Contact person Date Reference Page Ulf Lemke F027196A 1 (4) Wood Technology issued by an Accredited Testing Laboratory Contact person Ulf Lemke 2014-01-22 3F027196A 1 (4) Wood Technology +46 10 516 50 32 ulf.lemke@sp.se 1002 ISO/IEC 17025 Nordic Comfort Products A/S P.O. Box 3

More information

Outdoor furniture Seating and tables for camping, domestic and contract use

Outdoor furniture Seating and tables for camping, domestic and contract use BRITISH STANDARD BS EN 581-2:2009 Outdoor furniture Seating and tables for camping, domestic and contract use Part 2: Mechanical safety requirements and test methods for seating ICS 97.140; 97.200.30 NO

More information

Contact person Date Reference Page Hans Eriksson F000838D 1 (3) Wood Technology

Contact person Date Reference Page Hans Eriksson F000838D 1 (3) Wood Technology issued by an Accredited Testing Laboratory Contact person Hans Eriksson 2015-03-26 5F000838D 1 (3) Wood Technology +46 516 54 28 hans.eriksson@sp.se 02 ISO/IEC 17025 Nordic Comfort Products A/S P.O. Box

More information

David Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland th December, 2011.

David Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland th December, 2011. David Fagan, Mobility Manager Paragon Mobility Pty Ltd 3/10 Tapnor Crescent, Brendale, Queensland. 4500 15 th December, 2011 Dear David, Reference: testing the Catalyst Spark manual wheelchair to 77 kg

More information

Informal Document N 20 (30th GRSP, 3-6 December 2001, agenda item 1.4) Insert in the "CONTENTS" the headlines of new annexes 10 & 11 to read:

Informal Document N 20 (30th GRSP, 3-6 December 2001, agenda item 1.4) Insert in the CONTENTS the headlines of new annexes 10 & 11 to read: 30 November 2001 Informal Document N 20 (30th GRSP, 3-6 December 2001, agenda item 1.4) Draft Amendments To Regulation No. 17: (Strength of Seats) page ii Insert in the "CONTENTS" the headlines of new

More information

Type: Office work chair Lab.no.: Depth: 650 mm Width: 710 mm Height: 1345 mm Weight: 18,8 kg. EN :2009 and EN :2009.

Type: Office work chair Lab.no.: Depth: 650 mm Width: 710 mm Height: 1345 mm Weight: 18,8 kg. EN :2009 and EN :2009. Lanab Design Aktiebolag Attn.: Åke Jansson Lerbacksgatan 7 SE-571 38 NÄSSJÖ Order no. 515628 Appendices 3 Initials laha/prni/hbs Report Material: Model: LD6340/LD6240 Type: Office work chair Lab.no.: 515628-2

More information

Type: Office work chair Lab.no.: A. EN :2009 Office furniture - Office work chair - Part 2: Safety requirements.

Type: Office work chair Lab.no.: A. EN :2009 Office furniture - Office work chair - Part 2: Safety requirements. Labofa Stole A/S Attn.: Finn Pedersen Borgergade 42 DK-4241 Vemmelev Order no. 434372 Appendices 3 Initials laha/prni/hbs Report Material: Model: Five star office chairs from the series EGO Plus, EGO BASIS,

More information

Liste der verwendeten Prüfmittel List of used test equipment

Liste der verwendeten Prüfmittel List of used test equipment rodukte roducts rüfbericht-nr.: 21203523_002 Seite 2 von 12 age 2 of 12 Liste der verwendeten rüfmittel List of used test equipment rüfmittel Test equipment rüfmittel-nr. / ID-Nr. Equipment No. / ID-No.

More information

NovitaTech Engineering

NovitaTech Engineering NovitaTech Engineering 490869 TEST REPORT FOR PDG Product Design Group Eclipse 600 MANUAL WHEELCHAIR TEST DOCUMENTS AS3695:1992, AS3696-1:1990, AS 3696-3:1990, AS 3696-5:1989, AS 3696-8:1998, ISO 7176-7:1996

More information

Test Report No.: AJHL FT Date: JUN.02, 2016 Page 1 of 5

Test Report No.: AJHL FT Date: JUN.02, 2016 Page 1 of 5 Test Report No.: AJHL1605004946FT Date: JUN.02, 2016 Page 1 of 5 The following sample(s) was / were submitted and identified on behalf of the client as: Sample Description OFFICE CHAIR Type/Style K-106AH

More information

Liste der verwendeten Prüfmittel List of used test equipment

Liste der verwendeten Prüfmittel List of used test equipment rodukte roducts rüfbericht-nr.: 21254500_001 Seite 2 von 12 age 2 of 12 Liste der verwendeten rüfmittel List of used test equipment rüfmittel Test equipment rüfmittel-nr. / ID-Nr. Equipment No. / ID-No.

More information

A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation?

A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation? A brief guide for identification of non-compliant construction machinery Is this Compactor / Roller compliant with European legislation? Introduction Construction equipment placed on the EU market for

More information

ISO (revision) Walking Aids manipulated by both arms Requirements and test methods Part 2: Rollators

ISO (revision) Walking Aids manipulated by both arms Requirements and test methods Part 2: Rollators ISO/TC 173 N XXX (ISO/TC 173/WG 1 - N 269) Date: 2003-10--- ISO/CD 11199-2 Secretariat: SIS Deleted: ISO Formatted: English(U.K.), Deleted: 173 Formatted: English(U.K.), Deleted: SIS Formatted: Font: 10

More information

ERGOHUMAN ADVANCED ENGINEERING

ERGOHUMAN ADVANCED ENGINEERING 1 1 3 ADVANCED ENGINEERING The Ergohuman Plus takes our top selling chair to new levels, with more aluminium detailing, a seat tilt function and an organically formed base, the Ergohuman Plus is the ideal

More information

THE ENERGY EFFICIENCY ACT. Regulations made by the Minister under section 23 of the Energy Efficiency Act

THE ENERGY EFFICIENCY ACT. Regulations made by the Minister under section 23 of the Energy Efficiency Act Government Notice No... of 2016 THE ENERGY EFFICIENCY ACT Regulations made by the Minister under section 23 of the Energy Efficiency Act 1. These regulations may be cited as the Energy Efficiency (Labelling

More information

TEST REPORT FOR: Product Design Group Inc. Stellar Tilt Manual Wheelchair to 114kg

TEST REPORT FOR: Product Design Group Inc. Stellar Tilt Manual Wheelchair to 114kg TEST REPORT FOR: Product Design Group Inc. Stellar Tilt Manual Wheelchair to 114kg LABORATORY REFERENCE 492558 30th June 2016 Page 1 of 15 REFERENCED DOCUMENTS IN THIS REPORT: AS/NZS 3695.1:2011 Part 1:

More information

For IS: (Part 4): 1987 General requirements for rims for Automotive Vehicles - Part 4 - Scooters and scooter derivative rims

For IS: (Part 4): 1987 General requirements for rims for Automotive Vehicles - Part 4 - Scooters and scooter derivative rims AMENDMENT NO. 1 TO AIS 073 (Part 2) Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Sheet Metal Wheel Rims Method of Test and Requirements 1.0 Page No. III, Introduction: Substitute AIS

More information

ERGOHUMAN ADVANCED ENGINEERING

ERGOHUMAN ADVANCED ENGINEERING 1 ERGOHUMAN 2 2 3 ADVANCED ENGINEERING The Ergohuman chair is a perfect fusion of art and science, with flex zones that ensure constant support of back and lumbar, multi-dimensional adjustable arm rests

More information

TESTING REPORT. ROLLATORS - ISO classification in accordance with the INTERNATIONAL STANDARD ISO :2005. Testing No. 07.

TESTING REPORT. ROLLATORS - ISO classification in accordance with the INTERNATIONAL STANDARD ISO :2005. Testing No. 07. Danish Centre for Assistive Technology TESTING REPORT ROLLATORS - ISO classification 12.06.06 in accordance with the INTERNATIONAL STANDARD ISO 11199-2:2005 Testing No. 07.44A This page is page 1 of a

More information

FEDERAL STANDARD PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS

FEDERAL STANDARD PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS METRIC November 20, 2007 SUPERSEDING FNEW-83-269E October 31, 1989 FEDERAL STANDARD PERFORMANCE TEST METHOD FOR INTENSIVE USE CHAIRS The General Services Administration has authorized the use of this federal

More information

Initial each page: 1

Initial each page: 1 Initial each page: 1 Wheelchair Skills Test Questionnaire (WST-Q), Version 4.2: Paper Version for Powered Wheelchairs Operated by Caregivers Question Name of the wheelchair user (if any)? Answer Name of

More information

ASSEMBLY TOOLS FOR BOLTS & NUTS. Part 3: Insulated Wrenches

ASSEMBLY TOOLS FOR BOLTS & NUTS. Part 3: Insulated Wrenches Doc. KP1/3CB/TSP/09/057-3 1 Page 1 of 20 TABLE OF CONTENTS 0.1 Circulation List 0.2 Amendment Record FOREWORD 1. SCOPE 2. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6.

More information

TITLE: SPECIFICATION FOR BENCH VICE & BENCH GRINDER TABLE OF CONTENTS. 0.1 Circulation List. 0.2 Amendment Record

TITLE: SPECIFICATION FOR BENCH VICE & BENCH GRINDER TABLE OF CONTENTS. 0.1 Circulation List. 0.2 Amendment Record Page 1 of 10 TABLE OF CONTENTS 0.1 Circulation List 0.2 Amendment Record FOREWORD 1. SCOPE 2. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6. MARKING AND PACKING 7. DEMONSTRATION

More information

Tubular frames for piping group III (further as frames) are used to secure HVAC piping into walls and partitions.

Tubular frames for piping group III (further as frames) are used to secure HVAC piping into walls and partitions. CATALOGUE KM 12 0523a TUBULAR FRAMES Issued: 3/96 For piping group III Page: 1 Pages Total: 2 Tubular frames for piping group III (further as frames) are used to secure HVAC piping into walls and partitions.

More information

E/ECE/324/Rev.1/Add.57/Rev.3 E/ECE/TRANS/505/Rev.1/Add.57/Rev.3

E/ECE/324/Rev.1/Add.57/Rev.3 E/ECE/TRANS/505/Rev.1/Add.57/Rev.3 30 November 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and

More information

Möbler Stolar och bord för skol- och utbildningsmiljö Del 2: Säkerhetskrav och provningsmetoder

Möbler Stolar och bord för skol- och utbildningsmiljö Del 2: Säkerhetskrav och provningsmetoder SVESK STADARD SS-E 1729-2:2006 Fastställd 2006-07-21 Utgåva 1 Möbler Stolar och bord för skol- och utbildningsmiljö Del 2: Säkerhetskrav och provningsmetoder Furniture Chairs and tables for educational

More information

Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications

Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications FINAL DRAFT INTERNATIONAL STANDARD ISO/FDIS 5597 ISO/TC 131/SC 7 Secretariat: JISC Voting begins on: 2018 01 29 Voting terminates on: 2018 03 26 Hydraulic fluid power Cylinders Dimensions and tolerances

More information

8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.

8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series. 2 Guiding systems Fig 20 SKF precision shafts ( fig 20 ) can be supplied either as solid or hollow shafts. The solid shafts are available in all dimensions required to fit SKF linear ball bearings; the

More information

VRETA. Year Limited Warranty INCLUDED

VRETA. Year Limited Warranty INCLUDED VRETA 10 Year Limited Warranty INCLUDED Everyday life at home puts high demands on seating. VRETA seating series is tested to comply with our strict standards for quality and durability as well as with

More information

Collective amendments to UN Regulations Nos. 16, 44, 94, 129 and 137

Collective amendments to UN Regulations Nos. 16, 44, 94, 129 and 137 Submitted by the expert from EC Informal document GRSP-63-01 (63rd GRSP, 14-18 May 2018 agenda item 22) Collective amendments to UN Regulations Nos. 16, 44, 94, 129 and 137 Submitted by the expert from

More information

Test Report No: EEC18/01 dated August 02, 2018

Test Report No: EEC18/01 dated August 02, 2018 Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜD Group and the General Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is

More information

94, 129 and 137. Submitted. Commission. Figure 1 Warning label. mm or the. to the aforementioned, above. In derogation. equivalent area.

94, 129 and 137. Submitted. Commission. Figure 1 Warning label. mm or the. to the aforementioned, above. In derogation. equivalent area. Submitted by the expert from EC Informal document GRSP-61-29 (61 st GRSP, 08-12 May 2017 agenda item 22) Collective amendments to Regulations Nos. 16, 44, 94, 129 and 137 Submitted by the expert from the

More information

Economic and Social Council

Economic and Social Council United Nations Economic and Social Council ECE/TRANS/WP.29/GRSP/2017/27 Distr.: General 22 September 2017 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization

More information

Gruppo Desa S.P.A. Particulars. RSPO Annual Communications of Progress Particulars Form Submit date: 04-May :32 GMT Page 1/1

Gruppo Desa S.P.A. Particulars. RSPO Annual Communications of Progress Particulars Form Submit date: 04-May :32 GMT Page 1/1 Particulars About Your Organisation 1.1 Name of your organization Gruppo Desa S.P.A. 1.2 What is/are the primary activity(ies) or product(s) of your organization? Oil Palm Growers Palm Oil Processors and/or

More information

Evidence of Performance Burglar resistance

Evidence of Performance Burglar resistance Test Report No. 16-001785-PR03 (PB-C01-05-en-01) Client ALUMIL S.A. Industrial Area 61100 Kilkis Greece Product Burglar resistant Smart SD77 glass door RC 2 Designation SMART DOORS Overall dimensions (W

More information

Task Seating. Technical Document. Full statement of line including model codes, up charges and standards.

Task Seating. Technical Document. Full statement of line including model codes, up charges and standards. Task Seating Technical Document Full statement of line including model codes, up charges and standards. As shared work-spaces become increasingly common, office environments need to be more versatile than

More information

STIGA PARK 4 WD 107 M 107 M HD 121 M. 125 Combi Pro B INSTRUCTIONS FOR USE. »HC P K»fl œoà «Œ EÀfl

STIGA PARK 4 WD 107 M 107 M HD 121 M. 125 Combi Pro B INSTRUCTIONS FOR USE. »HC P K»fl œoà «Œ EÀfl STIGA PARK 4 WD 107 M 107 M HD 121 M 125 Combi Pro B INSTRUCTIONS FOR USE»HC P K»fl œoà «Œ EÀfl 8211-0543-01 1 125 Combi Pro 2 125 Combi Pro 3 125 Combi Pro 121 M 107 M HD A B C B 4 125 Combi Pro 107 M

More information

013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS

013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS 013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEYLON ELECTRICITY BOARD SRI LANKA Specification for MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEB Specification

More information

Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause

Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause 1. EN71 - Part1: Mechanical and Physical Properties Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause Test method : EN71-1:

More information

Common position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015

Common position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015 Common position by FR and CEMA on mechanical couplings for towed vehicles 28/9/2015 ANNEX XXXIV Requirements on mechanical couplings 1. Definitions For the purposes of this Annex: 1.1. Mechanical coupling

More information

12-SDMS-02 REV. 05 ( )

12-SDMS-02 REV. 05 ( ) 12-SDMS-02 REV. 05 (22-05-2018) SPECIFICATION FOR LUGS AND CONNECTORS FOR LOW-VOLTAGE & MEDIUM-VOLTAGE DISTRIBUTION SYSTEM Saudi Electricity Company 1. SCOPE... 3 2. CROSS REFERENCES TO OTHER SEC STANDARDS...

More information

SYLLABUS. EASA 748/2012 Part-21 SUBPART F/G POA - ADVANCED (FLY Course code: 004-C-P) Issue of FLY EN

SYLLABUS. EASA 748/2012 Part-21 SUBPART F/G POA - ADVANCED (FLY Course code: 004-C-P) Issue of FLY EN SYLLABUS EASA 748/2012 Part-21 SUBPART F/G (FLY Course code: 004-C-P) Introduction During this course Participants will learn and revise the regulations and requirements according to EASA Part 21. Summary

More information

Electric Vehicle Charging Safety Guidelines Part 2: Selection and Installation Edition DRAFT

Electric Vehicle Charging Safety Guidelines Part 2: Selection and Installation Edition DRAFT Date of publication: 1 November 2016Not yet published Issued by: Mark Wogan, Manager Energy Safety WorkSafe New ZealandNot yet issued Electric Vehicle Charging Safety Guidelines Part 2: Selection and Installation

More information

UPN. Rod and piston seal with energizing element UPN

UPN. Rod and piston seal with energizing element UPN Rod and piston seal with energizing element MATERIAL 1 1 Type Polyurethane Designation SEALPUR 93 Hardness 93 ShA 2 2 Type Nitril Rubber NBR Designation RUBSEAL 70 Hardness 70 ShA Pressure 400 bar FIELD

More information

Multi Bari. Key features at a glance: Additional options:

Multi Bari. Key features at a glance: Additional options: Multi Bari 2 Multi Bari Designed for comfort and pressure management control, the Multi Bari has removable waterfall back cushions that can be individually positioned and re-positioned for comfort with

More information

Z from: 1 November 2016

Z from: 1 November 2016 Date: Reference: 10 October 2016 I 24-1.1.5-8/16 Approval number: Validity Z-1.5-177 from: 1 November 2016 Applicant: PEIKKO GROUP CORPORATION Voimakatu 3 15101 Lahti FINLAND to: 31 October 2021 Subject

More information

Test Report No.: SDHL FT Date: May 15, 2017 Page 1 of 15

Test Report No.: SDHL FT Date: May 15, 2017 Page 1 of 15 Test Report No.: SDHL1703004564FT Date: May 15, 2017 Page 1 of 15 HERMAN MILLER NO.488, QIAN TANG JIANG RD., BEILUN, NINGBO, ZHEJIANG, 315800, P.R. CHINA The following sample(s) was / were submitted and

More information

S&C Series 2000 Circuit Switchers Outdoor Transmission (69 kv through 230 kv)

S&C Series 2000 Circuit Switchers Outdoor Transmission (69 kv through 230 kv) Outdoor Transmission ( kv through 230 kv) Terminal-Pad Loading Limits and Mounting-Pedestal Foundation Loading Data This publication sets forth the maximum-continuous and permissible peak loading limits

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SWAY BAR KITS # 2205 & 2206 Thank you for your purchase. Please call us at (562) 907-7757 if you have any questions about your Hotchkis Performance product. HOTCHKIS PERFORMANCE

More information

Madison. Key features at a glance: Additional options:

Madison. Key features at a glance: Additional options: Madison Madison The Madison Porter chair comes with a Dual Tilt in Space rise recline mechanism maximising the postural and pressure management options for the carer with independent backrest and leg

More information

34-SDMS-01 SPECIFICATIONS FOR

34-SDMS-01 SPECIFICATIONS FOR SPECIFICATIONS FOR M V DROPOUT FUSE CUT OUTS This specification is property of SEC and subject to change or modification without any notice CONTENTS C l a u s e s: Page No. 1- SCOPE 3 2- CROSS REFERENCES

More information

Page 2 of 6. Summary of testing The clause 17 and clause 29 are considered and check on the appliance.

Page 2 of 6. Summary of testing The clause 17 and clause 29 are considered and check on the appliance. 12012453 003 age 2 of 6 Summary of testing The clause 17 and clause 29 are considered and check on the appliance. Test items particulars Serial umber... : rototype samples Additional information... : (.A.)...

More information

Caring for Your Manual Wheelchair

Caring for Your Manual Wheelchair Caring for Your Manual Wheelchair Your wheelchair is a machine that will help you to be more active and mobile. Check the wheelchair often to be sure that it is working well and safely. There may be a

More information

Burton's Foods Ltd. Particulars. RSPO Annual Communications of Progress Particulars Form Submit date: 28-Mar :21 GMT Page 1/1

Burton's Foods Ltd. Particulars. RSPO Annual Communications of Progress Particulars Form Submit date: 28-Mar :21 GMT Page 1/1 Particulars About Your Organisation 1.1 Name of your organization 1.2 What is/are the primary activity(ies) or product(s) of your organization? Oil Palm Growers Palm Oil Processors and/or Traders Consumer

More information

THERMOMETER SPECIFICATIONS

THERMOMETER SPECIFICATIONS THERMOMETER SPECIFICATIONS MATERIALS STEMS: All models, Type 304 Stainless Steel (316 SS is available upon request) DIALS: Anodized alluminum Raised black marks and numbers with satin finish background

More information

ROLLER SHADE SPECIFICATIONS

ROLLER SHADE SPECIFICATIONS Part 1 General 1.1 Scope A. Furnish and install roller shades provided by Fabtex Inc., (800) 778-2791 B. Substitutions: Not Permitted C. Related work specified elsewhere 1.2 Quality Assurance A. Installer

More information

Series 1 shaft seal installation instructions

Series 1 shaft seal installation instructions Contents INTRODUCTION.... 3 SEL REPLCEMENT PROCEDURE Dust seal removal.... 3 Shaft seal access.... 3 Shaft seal removal.... 3 Verify correct bullet for drive shaft... 4 Replacement shaft seal installation....

More information

Presented Exclusively By: So Comfortable You ll Feel The Difference The Moment You Sit Down!

Presented Exclusively By: So Comfortable You ll Feel The Difference The Moment You Sit Down! Presented Exclusively By: So Comfortable You ll Feel The Difference The Moment You Sit Down! General Warranty Terms and Conditions We Make It Right NOVO HOME warrants products sold to the original consumer

More information

Wheelchairs: Manual or Power Operated. and Power Operated Vehicles (POV)/Scooters MP9111

Wheelchairs: Manual or Power Operated. and Power Operated Vehicles (POV)/Scooters MP9111 MP9111 Covered Service: Prior Authorization Required: Additional Information: Yes when meets criteria below Yes None Prevea360 Health Plan Medical Policy: Manual Wheelchair 1.0 Manual wheelchairs require

More information

Static O-Ring Reference

Static O-Ring Reference 63 Static Reference Industrial Static Seal Glands Male Gland Female Gland 1/2 E 1/2 E B1 Dia. (B1 Min = A Max. 2L Max.) B Dia. C Dia. D Dia. A Dia. A1 Dia. (A1 Max. = B Min. 2 L Max.) (e) 0 5 (TYP.) 32

More information

REPORT NO INSPECTION, TEST AND EVALUATION OF. Interlock Kits SUBMITTED TO MASTER ELECTRICAL SERVICES 3107 LANVALE AVENUE RICHMOND, VA 23230

REPORT NO INSPECTION, TEST AND EVALUATION OF. Interlock Kits SUBMITTED TO MASTER ELECTRICAL SERVICES 3107 LANVALE AVENUE RICHMOND, VA 23230 : November 16, 2009 REPORT NO. 52431-01 INSPECTION, TEST AND EVALUATION OF Interlock Kits SUBMITTED TO MASTER ELECTRICAL SERVICES 3107 LANVALE AVENUE RICHMOND, VA 23230 A WYLE LABORATORIES, INC. WYLE is

More information

Test Report No.: SDHL FT Date: Jun.15, 2017 Page 1 of 5

Test Report No.: SDHL FT Date: Jun.15, 2017 Page 1 of 5 Test Report No.: SDHL1705010441FT Date: Jun.15, 2017 Page 1 of 5 SHENGZHAO FURNITURE FACTORY LIANGYONG INDUSTRIAL ZONE, ZHENNAN JIUJIANG TOWN, FOSHAN CITY, GUANGDONG PROVINCE, CHINA The following sample(s)

More information

REPORT. Lab Number: (5105) Page 1 of 1. Index

REPORT. Lab Number: (5105) Page 1 of 1. Index REPORT Lab Number: (5105) 213-0075 Page 1 of 1 Cover Report Protocol Exhibits Other Index 1 Page 1 Page 4 Pages N/A 1 Page Technical Report: (5105)213-0075 August 04, 2005 Date Received: August 01, 2005

More information

Domestic Driving Permits & International Driving Permits

Domestic Driving Permits & International Driving Permits United Nations Economic Commission for Europe Transport Division Domestic Driving Permits & International Driving Permits WP1, 67th Session, New Delhi, 5 December 2013 Rebecca Huang, Transport Facilitation

More information

Draft amendments for ECE/TRANS/WP.29/GRSG/2015/27

Draft amendments for ECE/TRANS/WP.29/GRSG/2015/27 Submitted by the expert from Japan Informal document GRSG-109-08 (109 th GRSG, 29 September-2 October 2015, agenda item 11) Draft amendments for ECE/TRANS/WP.29/GRSG/2015/27 The text reproduced below was

More information

Power Lift & Recline Chair and Power Recline Only Chair

Power Lift & Recline Chair and Power Recline Only Chair Power Lift & Recline Chair and Power Recline Only Chair OWNER S MANUAL AND LIMITED LIFETIME WARRANTY UC540 Large Power Lift and Recline UC551 Large Power Recline Proudly Manufactured in the USA 401 Bridge

More information

ENGLISH ROLL ARM COLLECTION

ENGLISH ROLL ARM COLLECTION ENGLISH ROLL ARM COLLECTION All dimensions are given in inches. See the attached Dimensions Diagram sheet for more information on the keys used in this chart. OVERALL WIDTH OVERALL DEPTH OVERALL HEIGHT

More information

Proposal for the 09 series of amendments to Regulation No. 17

Proposal for the 09 series of amendments to Regulation No. 17 Informal document No. GRSP-58-28-Rev.1 Proposal for the 09 series of amendments to Regulation No. 17. Alignment to gtr No. 7 head restraints The text reproduced below was prepared by the experts from Japan

More information

Best Bar Service nyc RENTALS

Best Bar Service nyc RENTALS RENTALS 01.03.1831.12.18 LED Furniture rental for events 2018 LED Bar Curved Unit L60" D24" H45" Price: $165.00 (Single Piece) $330.00 (2 Piece Small Half Moon) $450.00 (3 Piece Half Moon) $899.00 (6 Piece

More information

E/ECE/324/Rev.2/Add.112/Rev.3/Amend.6 E/ECE/TRANS/505/Rev.2/Add.112/Rev.3/Amend.6

E/ECE/324/Rev.2/Add.112/Rev.3/Amend.6 E/ECE/TRANS/505/Rev.2/Add.112/Rev.3/Amend.6 27 April 2018 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the

More information

NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links

NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links Version:- 7.0 Date of Issue:- July 2017 Page 1 of 19 NPS/001/017 Technical Specification for Low Voltage and High Voltage Current Limiting Fuse Links 1. Purpose The purpose of this document is to detail

More information

Domestic furniture - Seating - Determination of stability. Bostadsmöbler - Bedömning av stabilitet för sittmöbler

Domestic furniture - Seating - Determination of stability. Bostadsmöbler - Bedömning av stabilitet för sittmöbler Domestic furniture - Seating - Determination of stability Bostadsmöbler - Bedömning av stabilitet för sittmöbler The European Standard has the status of a Swedish Standard. This document contains the official

More information

visio overview work chairs Statement of Line Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point.

visio overview work chairs Statement of Line Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point. visio overview Visio, a fully featured mesh Task Chair with multiple options at a mid-range price point. Visio Chairs have been designed and tested for users weighing up to 300 lbs Visio Chairs are equipped

More information

Tohoku ESIA. Hokuriku ESIA. Shikoku ESIA

Tohoku ESIA. Hokuriku ESIA. Shikoku ESIA Insulation management methods for low-voltage electric power circuit it in Japan May 20, 2010 Hideki Osawa Section Manager Technology Group of General Technical Center Tohoku Electrical Safety Inspection

More information

SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 *

SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 * SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 * PRODUCT: Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating

More information

Linear Way F. Linear Way F series. Linear Way F LWFF LWFH. Interchangeable. Wide structure. Flange type and block type.

Linear Way F. Linear Way F series. Linear Way F LWFF LWFH. Interchangeable. Wide structure. Flange type and block type. ide Rail Type Linear ay Linear ay LHLLS U.S. PATTD Linear ay is a linear motion rolling guide, featuring a wide track rail along which a highly rigid slide unit performs endless linear motion. A large

More information

Proposal for 10 series of amendments to Regulation No. 17 (Strength of seat)

Proposal for 10 series of amendments to Regulation No. 17 (Strength of seat) Submitted by the expert from CLEPA Informal document GRSP-64-25 (64 th GRSP, 11-14 December 2018, agenda item 9) Proposal for 10 series of amendments to Regulation No. 17 (Strength of seat) The text reproduced

More information

Overhead transmission lines Tension clamp

Overhead transmission lines Tension clamp SVENSKA KRAFTNÄT T~ SWEDISH NATIONAL GRID UNIT, BUSINESS AREA AFL, Asset Management Lines OUR REFERENCE TR05-06E DATE 2016-06-09 CONSULTÅTIONS m /j(j TECHNICAL GUIDELINE REVISION 3 Td APPROVED Overhead

More information