8+ B THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS

Size: px

Start display at page:

Download "8+ B THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS"

Shauna Tyler
5 years ago
Views:

THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS AIRSTUNT CHALLENGE STUNT SET Mattel, Inc., El Segundo, CA 90245 U.S.A. Consumer Affairs (800) 524-TOYS.

Mattel East Asia Ltd., Room 06, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.(993532-P) Lot 3.

1 THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS AIRSTUNT CHALLENGE STUNT SET Mattel, Inc., El Segundo, CA U.S.A. Consumer Affairs (800) 524-TOYS. Mattel U.K. Ltd., Vanwall Business Park, Maidenhead SL6 4UB. Helpline Mattel Australia Pty., Ltd., Richmond, Victoria. 32.Consumer Advisory Service Mattel East Asia Ltd., Room 06, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd.( P) Lot 3.5, 3th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 4740 PJ. Tel: , Fax: B INSTRUCTIONS 2004 Mattel, Inc. All Rights Reserved.

() Small Support () 3D Base (7) 90 Joint () Label Sheet () VJ/C Mechanism (2) Long Leg (2) Short Leg (7) 3XL () 45 Joint () Coupler () Diverter () Flip Jumper (2) 24.5" (62 cm) Guardrails (2) 40" (0.

8 cm) Guardrails (0) U-Clips (2) Guardrail Connectors (44) Black Clips () Booster () Booster Riser (2) Aux Base () Landing Pad Support () Airstunt Pump () Landing Pad () T2P (Adaptor for connecting

2 () Small Support () 3D Base (7) 90 Joint () Label Sheet () VJ/C Mechanism (2) Long Leg (2) Short Leg (7) 3XL () 45 Joint () Coupler () Diverter () Flip Jumper (2) 24.5" (62 cm) Guardrails (2) 40" (0.6 cm) Guardrails (2) 67" (70 cm) Guardrails (2) 83" (20.8 cm) Guardrails (0) U-Clips (2) Guardrail Connectors (44) Black Clips () Booster () Booster Riser (2) Aux Base () Landing Pad Support () Airstunt Pump () Landing Pad () T2P (Adaptor for connecting to other tracks) All track connections lock together with the TECH TRAX system. Be sure tabs insert fully to lock tracks together properly as shown. End of Guardrail Press guardrails into clips until they snap and lock. Snap! Clips attach to tracks as shown. Notches on clips align with tabs on tracks to lock in proper position. Extend Guardrails with Guardrail Connector (2) R-4 (4) R-6 (6) R-9 (5) R-2 (2) R-8 () Car Jump Master () (2) C-2 (3) C- (2) S-9 () S-2 (3) S-8 Push air tubes onto connections fully to prevent any air leaks. UNLOCK LOCK CONNECTOR Rod marking system. Track marking system. 2

Battery Safety Information In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your toy (product).

Replace batteries when booster can no longer propel cars through the track set. Non-rechargeable batteries are not to be recharged.

3 Battery Safety Information In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your toy (product). To avoid battery leakage; Base support BATTERIES NOT INCLUDED. PHILLIPS HEAD SCREWDRIVER NOT INCLUDED. 3 D cell batteries required. For longer life, use only alkaline batteries. Replace batteries when booster can no longer propel cars through the track set. Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product before being charged (if designed to be removable). Rechargeable batteries are only to be charged under adult supervision (if designed to be removable). Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Do not mix old and new batteries. Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product. The supply terminals are not to be shortcircuited. Dispose of battery(ies) safely. Do not dispose of this product in a fire. The batteries inside may explode or leak. Apply labels, 2 and 3. Long Leg 8 ON/OFF SWITCH Short Leg Short Leg Long Leg 3D Base 3D Base (2) SL (2) LL 3 4

4 4.5" (.4 cm) R-8 R-2 R-8 Use book as a tool to measure. " (2.5 cm) Connected R-2 (2) R-8 (3) 90 Joints " (2.9 cm) 64

5 ~0.375" (26.4 cm) 8.5" (2.6 cm) Connected R-4 R-2 R-6 (3) 3XL () R-4 (2) 90 Joints () R-4 () R-6 () R " (.9 cm) 2" (5. cm) 8

6 2.25" (5.4 cm).875" (2.2 cm) R-6 R-2 3XL R-2 Apply labels 7, 8 and 9. Diverter 90 Joint (2) R-2 Coupler R-6 3XL 9 7.5" (9 cm) 0

7 5.75" (4.6 cm) 2.375" (6 cm) R-9 0.5" (.3 cm) R-9 U-Clip R-2 90 Joint Aux Base R-9 3XL U-Clip R-9 R-2 2

8 2.5" (6.4 cm) Apply label 0. R-6 Flip Jumper 45 Joint R-6 3 2

9 R-6 See detail on page 7. Connected Landing Pad Aux Base R-6 6 Clips " (8.6 cm) 6

10 Connected Landing Pad Landing Pad Support 7 8

11 C-2 Insert 4 Clips Insert 4 Clips C

12 Car Direction 2 Snap guardrails onto every clip. Insert guardrails into booster before snapping onto clips. 24.5" (62 cm) Guardrail 24.5" (62 cm) Guardrail 24.5" (62 cm) Guardrail Booster 2 22

13 2 3 S-8 S-8 S-2 S8 C- C- Booster Connection Insert 56 Clips S-8 (3) S-8 () S-2 (2) C

14 S-2 Connection Connection 2 2 S-8 S-8 S-8 S

15 S-2 2 S-8 S-2 2 S-8 C- 3 S-8 S-8 Connection 3 S-8 S

16 S-8 3 S-2 Diverter Connection 2 C- C- 3 Snap guardrails onto Diverter. 2 Snap guardrails onto every clip. S-8 83" (20.8 cm) Guardrails S-8 Start here. (2) 83" (20.8 cm) Guardrails 29 30

17 2 C-2 Diverter Connection 3 S-9 40 Clips C- (6) () C-2 () C- () S

18 Connection 33 34

19 C-2 2 C-2 Connection

20 C-2 2 C

21 4.875" (2.4 cm) Connection 3 2 C-2 2 C-2 3XL 3 3 R-9 Small Support C

22 2 Snap guardrails onto every clip. Flip Jumper Connection Start here. 3 Snap guardrails onto Flip Jumper. C C- S-9 67" (70 cm) Guardrails (2) 67" (70 cm) Guardrails 4 42

23 3.25" (8.3 cm) () U-Clip VJ/C Mechanism 43 44

24 Diverter Connection S-9 (22) Clips (4) () S

25 47 48

26 VJ/C Mechanism Connection Connection S

27 2 Snap guardrails onto every clip. Apply labels, 2, 3 and 4. 8 Snap guardrails onto Diverter. 3 Snap guardrails onto VJ/C Mechanism. 40" (0.6 cm) Guardrails Connect 3D Base cord to Booster. Airstunt Pump 5 52

28 Play Mode Caddy Play Mode 2 STEP C Turn power on. Press and release button on pump to lift ramp on Flip Jumper. B A Press and hold button to turn VJ/C Mechanism until the caddy engages the entrance ramp. A STEP 2 ON Press and release button. A Normal position. A Press and release button to divert car. Pump approximately 5-20 times. B C 53 START HERE START HERE 54

design of your Tech Trax set. As a general rule, lighter cars work better on tall track sets and heavier cars work better on downhill track sets.

29 ASSEMBLE FRONT END VEHICLE Designed for jumps. TOOL REMOVE FRONT END/TOP SIDE NOTE: Smaller wheels are in front, larger wheels for rear. REMOVE WEIGHTS ASSEMBLE REAR END REAR END/TOP SIDE By adjusting the amount of weight and where you place it on the chassis, you can tune the performance of your Tech Trax vehicle to match the unique design of your Tech Trax set. As a general rule, lighter cars work better on tall track sets and heavier cars work better on downhill track sets. NOTE: Smaller wheels are in front, larger wheels for rear. FRONT END/BOTTOM SIDE FLIP OVER Booster TRY FRONT-LOADED FOR BETTER LOOPS TRY BACK-LOADED FOR BETTER JUMPS REAR END/BOTTOM SIDE BALANCED FOR OVERALL PERFORMANCE FLIP OVER REAR END/TOP SIDE INSERT Small Support Booster Riser 55 Use supplied tool to help remove compression spring. 56

(Note: Be sure the Locking Key is in the open position.) Position along the rod where desired, and then turn the Lock key to secure.

30 Where Guardrail ends, be sure to carefully flex the ends outward, so that it won t impede the vehicles movement. The T2P connector can be used as an adaptor for connecting the track pieces of TECH TRAX, to existing Hot Wheels track. To use the 3XL, simply slide it onto one of the Rod pieces. (Note: Be sure the Locking Key is in the open position.) Position along the rod where desired, and then turn the Lock key to secure. To attach the track, take the section where two tracks are joined, and simply slide into the rotating clip unit. B3736 Flex Loop Stunt Set B4687 Trigger Flip Stunt Set B4686 Power Swing Stunt Set B6529 Crash Chamber Stunt Set To use the 45/90/T-Joints, simply slide a Rod into the open face of the joint, and then close over the cover element. (Note: Be sure the Joint Key is rotated into its open position.) To lock its position on the rod, rotate the Joint Key 90 degrees. Fine tuning of the set is required to yield optimum performance. By loosening the Locking Key, you can now set the angle of the track where you desire. To remove the track from the Rotating Clip, simply squeeze its ends outward, and pull track out of the groove. AVAILABLE CARS: Each sold separately, subject to availability. Colors and decorations may vary. B468 Jump Master B4682 Turbo Torque B4683 Power Pivot 57 58

THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS B4688-090 R-2 8+ Note: Tape (not included) may be used to help stabilize Airstunt Challenge.

31 THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS B R-2 8+ Note: Tape (not included) may be used to help stabilize Airstunt Challenge. Airstunt Pump Tape C- R-9 R-9 67" (70 cm) Guardrails 3XL 90 Joint R-9 S-9 R-4 S-9 C-2 R-2 Diverter 3XL 3XL S-2 R-8 90 Joint S-8 R-2 3XL 90 Joint 90 Joint 3D Base R-6 R-2 R-8 40" (0.6 cm) Guardrail Small Support R-4 Coupler C- 83" (20.8 cm) Guardrail S-8 3XL R-6 Short Leg (2) 24.5"(62 cm) Guardrail (2) 40" (0.6 cm) Guardrail (2) 67" (70 cm) Guardrails (2) 83" (20.8 cm) Guardrail () 45 Joint (7) 90 Joints (2) Aux. Base (44) Black Clips (2 extra not used) () Booster () Booster Riser () 3D Base () Small Support (2) Long Leg (2) Short Leg () Diverter () Coupler () Flip Jumper () Landing Pad Support () Landing Pad () VJ/C Mechanism () Airstunt Pump () Label Sheet (0) U-Clips (2 extra not used) (7) 3XL (2) R-4 (4) R-6 (6) R-9 (5) R-2 (2) R-8 (3) C- (2) C-2 () (2) S-9 () S-2 (3) S-8 () T2P (not used) () Car Jump Master (2) Guardrail Connectors (not used) R-9 VJ/C Mechanism Flip Jumper Aux. Base Not for use with some Hot Wheels Vehicles Mattel, Inc. All Rights Reserved. R-6 45 Joint Landing Pad Support Landing Pad R-2 Long Leg 24.5"(62 cm) Guardrail R-6 Aux Base C-2 R-2 S-8 Booster (44) Black Clips

THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS Mattel, Inc. All Rights Reserved.

THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS THE ADVANCED CONSTRUCTION SYSTEM FOR ULTIMATE STUNTS POWER SWING STUNT SET 8+ Mattel, Inc., El Segundo, CA 90245 U.S.A. Consumer Affairs 1 (800) 524-TOYS.