ANNUALLY 29 May 1996 SUPERSEDING QPL October 1995 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C-83503
|
|
|
- Olivia Chandler
- 5 years ago
- Views:
Transcription
1 QUALIFICATIONS VALIDATED ANNUALLY 29 May 1996 SUPERSEDING QPL October 1995 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-C CONNECTOR, ELECTRICAL, FLAT CABLE, AND/OR PRINTED WIRING BOARD, NONENVIRONMENTAL GENERAL SPECIFICATION FOR This list has been prepared for use by or for the Government in the acquisition of products covered by subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements. THE ACTIVITY RESPONSIBLE FOR THIS QPL IS THE DEFENSE ELECTRONICS SUPPLY CENTER (DESC-ELS), DAYTON, OH MANUFACTURER'S TEST OR M83503/6-01 FCC A Distributed by: Alpha Wire Corp. M83503/6-02 FCC A M83503/6-03 FCC A M83503/6-01 CWR CW Industries M83503/6-02 CWR M83503/6-03 CWR M83503/7-01 FCC A Distributed by: Alpha Wire Corp. M83503/7-02 FCC A M83503/7-03 FCC A M83503/7-04 FCC A M83503/7-06 FCC A M83503/7-08 FCC A M83503/7-09 FCC A M83503/7-10 FCC A M83503/7-11 FCC A M83503/7-01 CWR CW Industries M83503/7-02 CWR M83503/7-03 CWR M83503/7-04 CWR M83503/7-06 CWR M83503/7-08 CWR M83503/7-09 CWR M83503/7-10 CWR M83503/7-11 CWR of 6 AMSC N/A FSC 5935 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
2 M83503/20-01 FCC A Distributed by: Alpha Wire Corp. M83503/20-02 FCC A M83503/20-03 FCC A M83503/20-04 FCC A M83503/20-05 FCC A M83503/20-06 FCC A M83503/20-07 FCC A M83503/20-08 FCC A M83503/20-09 FCC A M83503/20-10 FCC A M83503/20-11 FCC A M83503/20-12 FCC A M83503/20-13 FCC A M83503/20-14 FCC A M83503/20-15 FCC A M83503/20-16 FCC A M83503/20-17 FCC A M83503/20-18 FCC A M83503/20-19 FCC A M83503/20-20 FCC A M83503/20-21 FCC A M83503/20-22 FCC A M83503/20-23 FCC A M83503/20-24 FCC A M83503/20-25 FCC A M83503/20-26 FCC A M83503/20-27 FCC A M83503/20-01 CWN CW Industries M83503/20-02 CWN M83503/20-03 CWN M83503/20-04 CWN M83503/20-05 CWN M83503/20-06 CWN M83503/20-07 CWN M83503/20-08 CWN M83503/20-09 CWN= M83503/20-10 CWN M83503/20-11 CWN M83503/20-12 CWN M83503/20-13 CWN M83503/20-14 CWN M83503/20-15 CWN M83503/20-16 CWN M83503/20-17 CWN M83503/20-18 CWN M83503/20-19 CWN M83503/20-20 CWN M83503/20-21 CWN M83503/20-22 CWN M83503/20-23 CWN M83503/20-24 CWN M83503/20-25 CWN M83503/20-26 CWN M83503/20-27 CWN M83503/21-01 FCC A Distributed by: Alpha Wire Corp. M83503/21-02 FCC A M83503/21-03 FCC A M83503/21-04 FCC A M83503/21-05 FCC A M83503/21-06 FCC A M83503/21-07 FCC A M83503/21-08 FCC A M83503/21-09 FCC A M83503/21-10 FCC A M83503/21-11 FCC A M83503/21-12 FCC A M83503/21-13 FCC A 2
3 M83503/21-14 FCC A Distributed by: Alpha Wire Corp. M83503/21-15 FCC A (Continued) M83503/21-16 FCC A M83503/21-17 FCC A M83503/21-18 FCC A M83503/21-19 FCC A M83503/21-20 FCC A M83503/21-21 FCC A M83503/21-22 FCC A M83503/21-23 FCC A M83503/21-24 FCC A M83503/21-25 FCC A M83503/21-26 FCC A M83503/21-27 FCC A M83503/21-01 CWN CW Industries M83503/21-02 CWN M83503/21-03 CWN M83503/21-04 CWN M83503/21-05 CWN M83503/21-06 CWN M83503/21-07 CWN M83503/21-08 CWN M83503/21-09 CWN M83503/21-10 CWN M83503/21-11 CWN M83503/21-12 CWN M83503/21-13 CWN M83503/21-14 CWN M83503/21-15 CWN M83503/21-16 CWN M83503/21-17 CWN M83503/21-18 CWN M83503/21-19 CWN M83503/21-20 CWN M83503/21-21 CWN M83503/21-22 CWN M83503/21-23 CWN M83503/21-24 CWN M83503/21-25 CWN M83503/21-26 CWN M83503/21-27 CWN M83503/23-02 FCC A Distributed by: Alpha Wire Corp. M83503/23-04 FCC A M83503/23-06 FCC A M83503/23-08 FCC A M83503/23-10 FCC A M83503/23-12 FCC A M83503/23-02 CWR CW Industries M83503/23-04 CWR M83503/23-06 CWR M83503/23-08 CWR M83503/23-10 CWR M83503/23-12 CWR M83503/24-01 FCC A Distributed by: Alpha Wire Corp. M83503/24-02 FCC A M83503/24-03 FCC A M83503/24-04 FCC A M83503/24-05 FCC A M83503/24-06 FCC A M83503/24-07 FCC A M83503/24-08 FCC A M83503/24-09 FCC A M83503/24-10 FCC A M83503/24-11 FCC A M83503/24-12 FCC A M83503/24-13 FCC A 3
4 M83503/24-14 FCC A Distributed by: Alpha Wire Corp. M83503/24-15 FCC A (Continued) M83503/24-16 FCC A M83503/24-17 FCC A M83503/24-18 FCC A M83503/24-19 FCC A M83503/24-20 FCC A M83503/24-21 FCC A M83503/24-22 FCC A M83503/24-23 FCC A M83503/24-24 FCC A M83503/24-25 FCC A M83503/24-26 FCC A M83503/24-27 FCC A M83503/24-01 CWN CW Industries M83503/24-02 CWN M83503/24-03 CWN M83503/24-04 CWN M83503/24-05 CWN M83503/24-06 CWN M83503/24-07 CWN M83503/24-08 CWN M83503/24-09 CWN M83503/24-10 CWN M83503/24-11 CWN M83503/24-12 CWN M83503/24-13 CWN M83503/24-14 CWN M83503/24-15 CWN M83503/24-16 CWN M83503/24-17 CWN M83503/24-18 CWN M83503/24-19 CWN M83503/24-20 CWN M83503/24-21 CWN M83503/24-22 CWN M83503/24-23 CWN M83503/24-24 CWN M83503/24-25 CWN M83503/24-26 CWN M83503/24-27 CWN M83503/25-01 FCC A Distributed by: Alpha Wire Corp. M83503/25-02 FCC A M83503/25-03 FCC A M83503/25-04 FCC A M83503/25-05 FCC A M83503/25-06 FCC A M83503/25-07 FCC A M83503/25-08 FCC A M83503/25-09 FCC A M83503/25-10 FCC A M83503/25-11 FCC A M83503/25-12 FCC A M83503/25-13 FCC A M83503/25-14 FCC A M83503/25-15 FCC A M83503/25-16 FCC A M83503/25-17 FCC A M83503/25-18 FCC A M83503/25-19 FCC A M83503/25-20 FCC A M83503/25-21 FCC A M83503/25-22 FCC A M83503/25-23 FCC A M83503/25-24 FCC A M83503/25-25 FCC A M83503/25-26 FCC A M83503/25-27 FCC A 4
5 M83503/25-01 CWN CW Industries M83503/25-02 CWN M83503/25-03 CWN M83503/25-04 CWN M83503/25-05 CWN M83503/25-06 CWN M83503/25-07 CWN M83503/25-08 CWN M83503/25-09 CWN M83503/25-10 CWN M83503/25-11 CWN M83503/25-12 CWN M83503/25-13 CWN M83503/25-14 CWN M83503/25-15 CWN M83503/25-16 CWN M83503/25-17 CWN M83503/25-18 CWN M83503/25-19 CWN M83503/25-20 CWN M83503/25-21 CWN M83503/25-22 CWN M83503/25-23 CWN M83503/25-24 CWN M83503/25-25 CWN M83503/25-26 CWN M83503/25-27 CWN
6 MANUFACTURER'S NAME, ADDRESS CAGE AND PLANT CODE Distributed by: Alpha Wire Wire Corporation 711 Lidgerwood Avenue Elizabeth, NJ Manufactured by: CW Industries 130 James Way Southampton, PA CW Industries 130 James Way Southampton, PA Plant: Same Address 6 of 6
ANNUALLY 12 September 1997 SUPERSEDING QPL-234l May 1997 QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION.
QUALIFICATIONS VALIDATED QPL-234l9-39 ANNUALLY 12 September 1997 SUPERSEDING QPL-234l9-38 5 May 1997 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-F-234l9 FUSE, CARTRIDGE,
MS17340 N 12 A 1 FINISH AN EXAMPLE OF THE GOVERNMENT DESIGNATION WHICH IDENTIFIES THE COVER OR RECEPTACLE IS SHOWN B MS17343 C 20 FINISH SIZE -1-
QUALIFICATIONS VALIDATED EVERY 24 MONTHS 19-Jul-99 SUPERSEDING QPL-22992-40 31-Mar-98 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATI MIL-C-22992 CONNECTOR, PLUGS AND RECEPTACLES,
The activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY TWO YEARS 10-Sep-03 SUPERSEDING QPL-23419-43 24-Aug-01 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFI MIL-PRF-23419 FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL
The activity responsible for this QPL is the Defense Supply Center Columbus (DSCC-VQ), Columbus, OH TEST OR QUALIFICATION REFERENCE
S VALIDATED EVERY TWO YEARS 25-May-04 SUPERSEDING QPL-19207-44 18-Mar-03 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFI MIL-PRF-19207 FUSEHOLDERS, EXTRACTOR POST TYPE BLOWN FUSE
QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-DTL FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 F MAXIMUM
QUALIFICATION CERTIFIED SEPTEMBER 2000 22 July 2002 SUPERSEDING QPL-18240-32 15 November 2001 QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED UNDER MILITARY SPECIFICATION MIL-DTL-18240 FASTENER ELEMENT,
SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST PRODUCTS QUALIFIED UNDER SAE AEROSPACE STANDARD AS58091
SUPPLEMENTAL INFORMATION SHEET QPL 58091 S HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TESTING -4 16 Sept 2014 SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST OF PRODUCTS QUALIFIED
SERVICE No- 355 BULLETIN
PIPER SERVICE No- 355 BULLETIN Piper Aircraft Corporation Lock Haven, Pennsylvan ia, U. S.A. FAA DOA SO-1 Approved June 5, 1972 S Subject: Fuel Selector Valve Lubrication Models and Serial Numbers Affected:
SUPPLEMENTAL INFORMATION SHEET QPL SUPPLEMENTAL INFORMATION SHEET FOR QUALIFIED PRODUCTS LIST
ULEMENTAL INFORMATION HEET QL 81703 QUALIFICATION HAVE BEEN VALIDATED (Frequency: 3 Years) BY VERIFICATION TETING QL-81703-5 16 June 2015 ULEMENTAL INFORMATION HEET FOR QUALIFIED RODUCT LIT OF RODUCT QUALIFIED
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-24236/24E 5 April 2006 SUPERSEDING MIL-PRF-24236/24D 22 January 2001 PERFORMANCE SPECIFICATION SHEET SWITCHES, THERMOSTATIC, (BIMETALLIC), SUBMINIATURE, TYPE I, HERMETICALLY SEALED,
BULLETIN Piper Aircraft Corporation Lock Haven, Pennsylvania, U.S.A.
SERVICE No. 35 BULLETIN Piper Aircraft Corporation Lock Haven, Pennsylvania, U.S.A. "FAA DOA SO-1 Approved" June 5, 1972 S Subject: Subject: Fuel Selector valve LuDricatlon Models and Serial Numbers Affected:
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
INCH-POUND MIL-DTL-23053/1C 17 June 1996 SUPERSEDING MIL-I-23053/1B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/24H 8 June 2018 SUPERSEDING MIL-DTL-24308/24H w/amendment 4 8 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL,
DETAIL SPECIFICATION SHEET DISK, VALVE. Inactive for new design after 15 October 1998.
INCH-POUND MS29521H 23 September 2015 SUPERSEDING MS29521G 7 April 2009 DETAIL SPECIFICATION SHEET DISK, VALVE Inactive for new design after 15 October 1998. This specification is approved for use by all
COMMERCIAL ITEM DESCRIPTION RELAYS, ELECTROMAGNETIC, GENERAL PURPOSE 10 AMPERES, 1-3PDT, AC AND DC COILS, SOCKET MOUNT
INCH-POUND A-A-55143/1C 28 February 200 SUPERSEDING A-A-55143/1B 15 October 2000 COMMERCIAL ITEM DESCRIPTION RELAYS, ELECTROMAGNETIC, GENERAL PURPOSE 10 AMPERES, 1-, AC AND DC COILS, SOCKET MOUNT The General
DETAIL SPECIFICATION SHEET SWITCHES, ROTARY, SNAP ACTION CLASS 1SR BASE MOUNTED, SIDE CONNECTED
INCH-POUND 6 February 2006 SUPERSEDING MIL-S-15291/3A(SH) 22 July 1991 DETAIL SPECIFICATION SHEET SWITCHES, ROTARY, SNAP ACTION CLASS 1SR BASE MOUNTED, SIDE CONNECTED This specification is approved for
COMMERCIAL ITEM DESCRIPTION PINTLE ASSEMBLY, TOWING, MANUAL RELEASE, , AND LBS CAPACITY
[INCH-POUND] July 30, 1996 SUPERSEDING (see 7.5) COMMERCIAL ITEM DESCRIPTION PINTLE ASSEMBLY, TOWING, MANUAL RELEASE, 18 000, 40 000 AND 100 000 LBS CAPACITY The General Services Administration has authorized
This specification is approved for use by all Departments and Agencies of the Department of Defense.
INCH-POUND MIL-PRF-39014/5F 16 September 1997 SUPERSEDING MIL-C-39014/5E 16 August 1978 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), ESTABLISHED RELIABILITY,
DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II
INCH-POUND 08 December 2009 DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II This specification is approved for use
MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05
INCH-POUND MIL-C-11015/18E 14 May 2001 SUPERSEDING MIL-C-11015/18D 28 September 1970 MILITARY SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), STYLE CK05 The requirements for
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
INCH-POUND 17 June 1996 SUPERSEDING MIL-I-23053/11B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED This specification
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED
INCH-POUND MIL-PRF-8805/77H 19 September, 2000 SUPERSEDING MIL-PRF-8805/77G 3 September 1999 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, MOMENTARY, 4 CIRCUIT OR DPDT (10 AMPERES), UNSEALED This
DEPARTMENT OF DEFENSE STANDARD PRACTICE IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE
NOTICE OF CHANGE INCH-POUND MIL-STD-681D NOTICE 1 19 June 2000 DEPARTMENT OF DEFENSE STANDARD PRACTICE IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE TO ALL HOLDERS OF MIL-STD-681D: 1. THE
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22710/14F 20 April 2001 SUPERSEDING MIL-S-22710/14E 18 October 1982 PERFORMANCE SPECIFICATION SHEET SWITCHES, CODE INDICATING WHEEL (PRINTED CIRCUIT), (THUMBWHEEEL SWITCH ASSEMBLY, INTEGRAL
PERFORMANCE SPECIFICATION SHEET RUBBER, SYNTHETIC, TUBING
INCH-POUND 15 June 2009 SUPERSEDING MIL-R-6855/4 16 February 1987 PERFORMANCE SPECIFICATION SHEET RUBBER, SYNTHETIC, TUBING This specification is approved for use by all Departments and Agencies of the
MILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A
INCH-POUND MS35307E 25 April 1997 Superseding MS35307D 1 May 1969 MILITARY SPECIFICATION SHEET SCREW, CAP, HEXAGON HEAD (FINISHED HEXAGON BOLT), STEEL, CORROSION RESISTING, PASSIVATED, UNC-2A This specification
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-28876
Specification Details: DLA Land and Maritime - VQ Specification: MIL-PRF-28876 Title: Connectors, Fiber Optic, Circular, Plug and Receptacle Style, Multiple Removable, Termini Federal Supply Class (FSC):
COMMERCIAL ITEM DESCRIPTION RELAYS, ELECTROMAGNETIC, GENERAL PURPOSE 10 AMPERES, 1-3PDT, AC AND DC COILS, FLANGE MOUNT
INCH-POUND w/amendment 1 1 November 2005 SUPERSEDING A-A-55143/2A 15 October 2000 COMMERCIAL ITEM DESCRIPTION RELAYS, ELECTROMAGNETIC, GENERAL PURPOSE 10 AMPERES, 1-, AC AND DC COILS, FLANGE MOUNT The
MILITARY SPECIFICATION SHEET
m MIL-C-85049/Z6A 30 November 19YLI SUPERSEDING MIL-C-85049/2ti 16 January 1980 MS3419C 10 Ma 19&? MS316fB 10 May 198Z MILITARY SPECIFICATION SHEET CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL,
DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED
INCH-POUND MIL-DTL-23053/5C 17 June 1996 SUPERSEDING MIL-I-23053/5B 01 May 1986 DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED This specification
MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON
INCH-POUND 4 February 2004 SUPERSEDING MIL-M-38510/116 16 April 1980 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON This specification is approved for
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, 10 AMPERES AND LOW LEVEL, UNSEALED
INCH-POUND 2 January 201 SUPERSEDING 1 May 200 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, AMPERES AND LOW LEVEL, UNSEALED This specification is approved for use by all Departments and Agencies
COMMERCIAL ITEM DESCRIPTION HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY
[INCH-POUND] A-A-59613 August 16, 2001 SUPERSEDING ZZ-H-521F May 28, 1993 COMMERCIAL ITEM DESCRIPTION HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY The General Services Administration has authorized the
MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL
INCH-POUND MIL-DTL-83767C 24 September 2007 SUPERSEDING MIL-L-83767B 8 February 1980 MILITARY SPECIFICATION LUBRICATING OIL, VACUUM PUMP, MECHANICAL Reactivated after 24 September 2007 and may be used
PERFORMANCE SPECIFICATION GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395
METRIC 24 January 2005 SUPERSEDING MIL-PRF-81322F 21 July 1998 PERFORMANCE SPECIFICATION GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 This specification is approved for use
PERFORMANCE SPECIFICATION SHEET BATTERY, STORAGE, AIRCRAFT, MAINTENANCE-FREE, 24-VOLT, 1.5-AMPERE-HOUR
METRIC MIL-PRF-8565/6A (AS) 25 June 2001 SUPERSEDING DOD-B-8565/6(AS) 26 June 1987 PERFORMANCE SPECIFICATION SHEET BATTERY, STORAGE, AIRCRAFT, MAINTENANCE-FREE, 24-VOLT, 1.5-AMPERE-HOUR This specification
DETAIL SPECIFICATION SHEET
METRIC MIL-DTL-38999/36 30 November 2006 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, PLUG, LANYARD RELEASE, FAIL-SAFE, REMOVABLE CRIMP CONTACTS, PINS, SHELL SIZE 25, SERIES III,
COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02
METRIC A-A-59584C 15 September 2008 SUPERSEDING A-A-59584B 23 September 2003 COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 02 The General Services
PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE
INCH-POUND 12 December 2014 SUPERSEDING MIL-PRF-6081D w/amendment 1 30 January 2009 PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE This specification is approved for use by all Departments and Agencies
COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03
METRIC A-A-59585C 15 September 2008 SUPERSEDING A-A-59585B 23 September 2003 COMMERCIAL ITEM DESCRIPTION BEARING, BALL, ANNULAR, SINGLE ROW, RADIAL, NON-FILLING SLOT, DIMENSION SERIES 03 The General Services
DETAIL SPECIFICATION SHEET
METRIC MIL-DTL-38999/31E 12 March 2014 SUPERSEDING MIL-DTL-38999/31D 19 April 2002 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, PLUG, LANYARD RELEASE, FAIL-SAFE, REMOVABLE CRIMP
MILITARY SPECIFICATION SHEET
INCH-POUND MS21363B 2 July 2007 SUPERSEDING MS21363A(USAF) 2 July 1985 MILITARY SPECIFICATION SHEET COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, MAGNETICALLY SHIELDED, (FERRITE CORE-FERRITE SLEEVE),
DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT
INCH-POUND 16 February 2010 SUPERSEDING AN818 Rev 19 15 June 1994 DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT This specification is approved for use by all Departments and Agencies of the Department
DETAIL SPECIFICATION SHEET TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL. Inactive for new design after 28 September 1993.
INCH-POUND MS500040K 17 November 2011 SUPERSEDING MS500040J 1 March 1991 DETAIL SPECIFICATION SHEET TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL Inactive for new design after 28 September 1993.
PERFORMANCE SPECIFICATION SHEET BATTERY, RECHARGEABLE, NICKEL CADMIUM, VENTED, 1.2-VOLT, 13 AMPERE- HOUR, BB-475/A CELL
INCH-POUND 25 FEB 2011 PERFORMANCE SPECIFICATION SHEET BATTERY, RECHARGEABLE, NICKEL CADMIUM, VENTED, 1.2-VOLT, 13 AMPERE- HOUR, BB-475/A CELL This specification is approved for use within Army CECOM Life
DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 3 December 2012 SUPERSEDING 30 September 2011 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department of
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
INCH-POUND MIL-PRF-8805/100G 6 December 2012 SUPERSEDING MIL-PRF-8805/100F 4 October 2004 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, PLUNGER, 10 AMPERES 2PDT AND 7 AMPERES 4PDT, RESILIENT SEAL
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-83536/15A 12 July 2004 SUPERSEDING MIL-PRF-83536/15 27 March 1992 PERFORMANCE SPECIFICATION SHEET RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, PERMANENT
Hybrid Microcircuit Inherent Reliability for Space Applications
Hybrid Microcircuit Inherent Reliability for Space Applications Jeffrey H Sokol, PhD, CFA Presented at the MEWS 2007 October 29, 2007 (c) 2007 The Aerospace Corporation Outline Abstract Introduction PWB
PERFORMANCE SPECIFICATION GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE
METRIC 21 July 1998 SUPERSEDING MIL-G-81322E 22 January 1992 PERFORMANCE SPECIFICATION GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE This specification is approved for use by all Departments
DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT
INCH-POUND 19 August 2014 SUPERSEDING w/amendment 1 23 January 2013 DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT This specification is approved for use by all Departments and Agencies of the Department
PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED
INCH-POUND 14 June 2010 SUPERSEDING 22 May 2006 PERFORMANCE SPECIFICATION SHEET SWITCHES, SENSITIVE, SPDT, UNSEALED This specification is approved for use by all Departments and Agencies of the Department
DETAIL SPECIFICATION SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES
INCH-POUND MIL-DTL-83731/1B July 010 SUPERSEDING MIL-S-83731/1A 0 March 1987 DETAIL SPECIFICATI SHEET SWITCHES, TOGGLE, MINIATURE, LEVER SEAL, PANEL SEAL, FOUR POLE LOGIC LOAD TO 5 AMPERES Inactive for
PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE
INCH-POUND 10 November 1997 SUPERSEDING MIL-L-6081C 15 April 1964 PERFORMANCE SPECIFICATION LUBRICATING OIL, JET ENGINE This specification is approved for use by all Departments and Agencies of the Department
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55116
Specification Details: Specification: MIL-DTL-55116 Title: Connectors: Miniature Audio, Five Pin and Six Pin Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance
Genuine Aircraft Hardware Co. MIL H 6000 B It is for push on and clamp applications.
Genuine Aircraft Hardware Co. MIL H 6000 B This oil-resistant tube is reinforced with a high strength, mildew-resistant yarn designed to withstand oil, alcohol, coolant, fuel, water and temperatures from
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, NAND GATES, MONOLITHIC SILICON
INCH-POUND MIL-M-38510/370A 15 July 2004 SUPERSEDING MIL-M-38510/370(USAF) 18 March 1983 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, NAND GATES, MONOLITHIC
PERFORMANCE SPECIFICATION ACTUATOR, LINEAR, ELECTROMECHANICAL
INCH-POUND PERFORMANCE SPECIFICATION 17 September 2015 SUPERSEDING MIL-A-85046(AS) 7 September 1976 ACTUATOR, LINEAR, ELECTROMECHANICAL This specification is approved for use by the Naval Air Systems Command
PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS
METRIC 20 January 2012 SUPERSEDING MIL-PRF-7024E 1 October 1997 PERFORMANCE SPECIFICATION CALIBRATING FLUIDS, AIRCRAFT FUEL SYSTEM COMPONENTS Comments, suggestions, or questions on this document should
PERFORMANCE SPECIFICATION SHEET
INCH-POUND PERFORMANCE SPECIFICATION SHEET MIL-PRF-2886/E 28 Septmebr 206 SUPERSEDING MIL-PRF-2886/D w/amendment 0 May 2005 FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION,
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/52D 12 September 2012 SUPERSEDING MIL-DTL-55302/52D 17 December 2003 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU,
COMMERCIAL ITEM DESCRIPTION HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING, WITH COUPLINGS
[INCH-POUND] A-A-59226 May 18, 1998 SUPERSEDING ZZ-H-451G January 13, 1984 COMMERCIAL ITEM DESCRIPTION HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING, WITH COUPLINGS The General Services Administration has
COMMERCIAL ITEM DESCRIPTION CLAMPS, HOSE
INCH-POUND 7 JUNE 2006 SUPERSEDING A-A-52506B 16 AUGUST 1996 COMMERCIAL ITEM DESCRIPTION CLAMPS, HOSE The General Services Administration has authorized the use of this Commercial Item Description (CID)
DETAIL SPECIFICATION FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 F MAXIMUM
INCH-POUND 2 JUNE 1997 SUPERSEDING MIL-F-18240E 1 DECEMBER 1989 DETAIL SPECIFICATION FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 F MAXIMUM This specification is approved for use by all Departments
DETAIL SPECIFICATION SHEET CAP INSERT, ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING
INCH-POUND Rev 13 7 August 2014 SUPERSEDING w/amendment 1 20 November 2013 DETAIL SPECIFICATION SHEET CAP INSERT, ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING This specification is approved for use by
DETAIL SPECIFICATION SHEET
INCH-POUND 25 November 1996 SUPERSEDING MIL-F-16377/53A(SH) 9 December 1988 DETAIL SPECIFICATION SHEET FIXTURES, INCANDESCENT, DETAIL LIGHTING, LANTERN, HAND, PORTABLE AND RELAY WATERTIGHT SYMBOLS 100.2,
DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE
INCH-POUND 30 September 2011 SUPERSEDING MS51844D 19 April 2007 DETAIL SPECIFICATION SHEET SLEEVE, SWAGING-WIRE ROPE This specification is approved for use by all Departments and Agencies of the Department
MIL-STD S 26 JULY 1985
k -. Downloaded from http://www.everyspec.com -- MIL-STD-3-S 6 JULY 985 SUPERSEDING MIL-STD-3(ln 3 MAY 967 part) MILITARY STANDARD FASTENER TEST METHODS METHOD 5, DRIVING RECESS TORQUE QUALITY CONFORMANCE
DETAIL SPECIFICATION RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES
INCH-POUND 11 August 2006 SUPERSEDING MIL-R-25988B 12 July 1983 DETAIL SPECIFICATION RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES Reactivated
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22710/15H 20 April 2001 SUPERSEDING MIL-S-22710/15G 29 March 1985 PERFORMANCE SPECIFICATION SHEET SWITCHES, CODE INDICATING WHEEL (PRINTED CIRCUIT), (THUMBWHEEEL SWITCH ASSEMBLY, SEALED
LIFT TRUCK POLICY AND PROGRAM
LIFT TRUCK POLICY AND PROGRAM Table of Contents 1.0 Policy Statement and Program Overview... 4 2.0 Lift Truck Applicable Legislation, Guidelines and Standards... 4 3.0 Forklift Program Requirements...
DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24266R 1 December 2016 SUPERSEDING MS24266P 7 August 2015 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R Inactive for new design after
[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986
![[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986](/thumbs/90/102223285.jpg "[INCH-POUND] A-A December 1999 SUPERSEDING MIL-C-4109F 31 October 1986")
[INCH-POUND] 30 December 1999 SUPERSEDING MIL-C-4109F 31 October 1986 COMMERCIAL ITEM DESCRIPTION COUPLING HALVES, QUICK-DISCONNECT The General Services Administration has authorized the use of this commercial
PERFORMANCE SPECIFICATION
METRIC 05 November 2015 SUPERSEDING MIL-PRF-7870D 30 April 2010 PERFORMANCE SPECIFICATION LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) This specification is approved for use by all Departments
PERFORMANCE SPECIFICATION COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC
INCH-POUND w/amendment 1 29 December 2004 SUPERSEDING 24 October 1997 PERFORMANCE SPECIFICATION COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC This specification is approved for use by all Departments
PERFORMANCE SPECIFICATION GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT
METRIC 15 August 211 SUPERSEDING MILPRF27617F 17 February 1998 PERFORMANCE SPECIFICATION GREASE, AIRCRAFT AND INSTRUMENT, FUEL AND OXIDIZER RESISTANT Comments, suggestions, or questions on this document
Downloaded from
December 20, 1989 TO SUPERSEDE W-F-408D 30 March 1984 FEDERAL SPECIFICATION FITTINGS FOR CONDUIT, METAL, RIGID (THICK-WALL AND THIN-WALL (EMT) TYPE) This specification is approved by the Commissioner.
DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24266P 7 August 2015 SUPERSEDING MS24266N 20 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, MINIATURE, CLASSES E, F, G AND R Inactive for new design after 14
COMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680
NOT MEASUREMENT SENSITIVE 27 September 00 COMMERCIAL ITEM DESCRIPTION DRY CLEANING AND DEGREASING SOLVENT, PD680 The General Services Administration has authorized the use of this commercial item description
PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC), CLASS 2, STRAIGHT PLUG
INCH-POUND MIL-PRF-55339/38A 10 January 2005 SUPERSEDING MIL-PRF-55339/38 11 January 1977 PERFORMANCE SPECIFICATION SHEET ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY. (BETWEEN SERIES BNC TO SERIES TNC),
PERFORMANCE SPECIFICATION COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC
INCH-POUND 24 October 1997 SUPERSEDING MIL-C-87252B 25 August 1993 PERFORMANCE SPECIFICATION COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC This specification is approved for use by all Departments and
DLA Land and Maritime - VQ Supplemental Information Sheet for Electronic QPL-55116
Specification Details: Specification: MIL-DTL-55116 Title: Connectors: Miniature Audio, Five Pin and Six Pin Federal Supply Class (FSC): 5935 Conventional: Yes Specification contains quality assurance
PERFORMANCE SPECIFICATION COOLERS, LUBRICATING OIL, AIRCRAFT, GENERAL SPECIFICATION FOR
I INCH-POUND 29 December 1997 SUPERSEDING MIL-C-25478B(USAF) 28 March 1995 PERFORMANCE SPECIFICATION COOLERS, LUBRICATING OIL, AIRCRAFT, GENERAL SPECIFICATION FOR This specification is approved for use
European Aviation Safety Agency
European Aviation Safety Agency EASA TYPE-CERTIFICATE DATA SHEET Number : IM.E.027 Issue : 02 Date : 06 May 2008 Type : Lycoming IO-580 series engines Variants Lycoming IO-580-B1A Lycoming AEIO-580-B1A
DETAIL SPECIFICATION SHEET
INCHPOUND MILDTL85052/1C 30 March 2005 SUPERSEDING MILC85052/1B 30 MAY 1984 DETAIL SPECIFICATION SHEET CLAMP, LOOP, TUBE177 PH CRES, 275 o F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT This specification
SFI SPECIFICATION 4.2 EFFECTIVE: OCTOBER 26, 1994*
SFI SPECIFICATION 4.2 EFFECTIVE: OCTOBER 26, 1994* PRODUCT: Tractor Blankets 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-17361/4B(SH) 19 September 2006 SUPERSEDING MIL-C-17361/4A(SH) 13 March 1995 DETAIL SPECIFICATION SHEET CIRCUIT BREAKERS, AIR, ELECTRIC, INSULATED HOUSING (SHIPBOARD USE) TYPES AQB-A101,
PERFORMANCE SPECIFICATION COOLERS, LUBRICATING OIL, AIRCRAFT, GENERAL SPECIFICATION FOR
INCH-POUND 06 May 2013 SUPERSEDING MIL-PRF-25478C 29 December 1997 PERFORMANCE SPECIFICATION COOLERS, LUBRICATING OIL, AIRCRAFT, GENERAL SPECIFICATION FOR This specification is approved for use by all
MILITARY SPECIFICATION CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM PAGE 1
NOT MEASUREMENT SENSITIVE 26 November 1997 SUPERSEDING AMENDMENT 2 31 July 1996 MILITARY SPECIFICATION CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM This amendment forms a part of,
ABU TYPE 8½" X 12" BRAKE CYLINDERS
ABU TYPE 8½" X 2" BRAKE CYLINDERS ABU Brake Cylinder, 578329 ABU- Brake Cylinder, 578330 ABU-2 Brake Cylinder, 57833 ABU-3 Brake Cylinder, 57875 ABU-4 Brake Cylinder, 666 ABU-5 Brake Cylinder, 6663 DECEMBER
Policy on Use of Vehicles for University Purposes
SAFETY AND SECURITY Effective Date: October 24, 2014 Date Revised: December 15, 2017 Supersedes: N/A Related Policies: Policy on Professional Standards and Business Conduct Responsible Office/Department:
PERFORMANCE SPECIFICATION GREASE, AUTOMOTIVE AND ARTILLERY
NOT MEASUREMENT SENSITIVE w/ 26 September 2012 SUPERSEDING 30 September 2008 PERFORMANCE SPECIFICATION GREASE, AUTOMOTIVE AND ARTILLERY This specification is approved for use by all Departments and Agencies
TIME OF COMPLIANCE: At owner s discretion or when part replacement is necessary.
52 Oliver Street Williamsport, PA. 770 U.S.A. Telephone + (877) 839-7878 (U.S. and Canada) Telephone + (570) 327-7222 (International) Fax + (570) 327-70 Email Technicalsupport@lycoming.com www.lycoming.com
REVISIONS SYMBOL DESCRIPTION DATE APPROVAL
REVISIONS SYMBOL DESCRIPTION DATE APPROVAL L Revised per RN A-203. 2/23/16 JS K Revised per RN A-191 12/29/14 JS J Revised per RN A-183 4/25/13 JS I Revised per RN A-170. 7/15/11 JS H Revised per RN A-151.
MILITARY SPECIFICATION MOUNT, TELESCOPE AND QUADRANT: M172
MILITARY SPECIFICATION MOUNT, TELESCOPE AND QUADRANT: M172 30 MARCH 1990 SUPERSEDING MIL-M-48559(MU) 12 September 1975 This specification is approved for use by the U.S. Army Armament, Munitions and-chemical
(1) A one-way trip constitutes one unit of transportation service.
(A) Purpose To transport an individual 60+ from one place to another through the use of a provider's vehicle and driver. Examples of places to which the provider may transport an individual are a medical
DEPARTMENT OF DEFENSE INTERFACE STANDARD
INCH-POUND MIL-STD-1560C 23 January 2017 SUPERSEDING MIL-STD-1560C 11 February 2015 DEPARTMENT OF DEFENSE INTERFACE STANDARD INSERT ARRANGEMENTS FOR MIL-DTL-38999, MIL-DTL-27599, AND SAE-AS29600 SERIES
PERFORMANCE SPECIFICATION
INCH-POUND 19 March 2008 PERFORMANCE SPECIFICATION LIGHT EMITTING DIODE (LED) COMPOSITE STOP, REAR TURN SIGNAL AND TAIL LAMPS WITH INFRA-RED SECURE BLACKOUT TAIL AND BLACKOUT STOP LAMPS This specification
DETAIL SPECIFICATION GASKETS, WAVEGUIDE FLANGE GENERAL SPECIFICATION FOR
INCH-POUND 25 November 1998 SUPERSEDING MIL-G-24211 28 MARCH 1966 DETAIL SPECIFICATION GASKETS, WAVEGUIDE FLANGE GENERAL SPECIFICATION FOR This specification is approved for use by all Departments and
ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ TT-T-306E May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION
ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION THINNER, SYNTHETIC RESIN ENAMELS This specification has been approved by the Commissioner,
r Class 1 - Alloy chain.
&-C-271C 17 July 1986 SUPERSEDING Fed. Spec. RR-C-271B August 28, 1973 (See 6.9) FEDERAL SPECIFICATION CHAINS AND- AITACHtIENTS. WELDED AND WELDLESS This specification is approved by the Commisioner, Office