FASGM 5025 FASGM 6030 FASGM 7530 FASGM 10030

Size: px

Start display at page:

Download "FASGM 5025 FASGM 6030 FASGM 7530 FASGM 10030"

Austin Green
5 years ago
Views:

SERIES 5025 6030 7530 10030 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes.

In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals.

1 SERIES BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes. The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature. In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor. Cross Movement i.e. Z-Axis is driven through Precision Ball Screw with Nut & A.C. Induction Motor. All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI. STANDARD ACCESSORIES 1) Grinding wheel 2) Grinding wheel ange unit 3) Wheel balancing mandrel 7) Operating Instruction Manual 8) Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation. NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system. MPG with increment of in Y-Axis. Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade. OPTIMUM ribbing for more stability with Maximum vibration damping capacity. Robust & Sturdy design for precise grinding results over long period of time. Precision Ground Guide ways with anti-friction Turcite B-lined material. No overhanging in Guide ways. Inﬁnitely variable Incremental Auto Cross Feed. Water Baf es to protect Cross Guide ways from coolant & grinding dust. Natural Air Cooled Hydraulic Power pack provided separately for easy servicing. Equipped with Rough, Finish & Spark out Auto Grinding cycles. Criss Cross grinding provision. Separate settable Auto cross feed for Rough & Finish grinding cycles. Imported Super Precision bearings packed with Grease for life. Perfect Squareness of all X,Y & Z Axes. Interlocks on Spindle Rotation/Magnetic Chuck.

2 TECHNICAL SPECIFICATIONS DESCRIPTION UOM CAPACITY Working Surface of the Table 500 x 250 x 750 x 1000 x Max. Job size that can be Ground 500 x 250 x 750 x 1000 x Max. Longitudinal Travel Max. Cross Traverse Electro-Magnetic Chuck 500 x x 1000 x Max. Spindle Centre from Table Surface Max. weight carrying capacity of the Table x SPEEDS & FEEDS Table Speed (Inﬁnitely variable) m/min 5-30 Power Cross traverse (Variable) /min /stroke Auto cross feed at each table reversal (Variable) Cross feed Graduation Vertical feed Power Elevation /min Vertical feed graduation (MPG) Vertical In Feed Amount (Settable) to GRINDING HEAD Speed of Grinding Spindle Rpm x 20 x 50.8 x 25 x 76.2 (Optional x 40 x 76.2) 3 / 2.2 Size of Grinding wheel (D x W x B) Power of Grinding wheel HYDRAULIC SYSTEM Working Pressure Kg/cm^2 12 Solenoid operated hydraulic power pack with facility to have soft table reversals. 2 / 1.47 Liters 120 Power pack POWER OF HYDRAULIC PUMP Hydraulic Motor Tank Capacity GENERAL 8/6 Net weight of Machine (Approx.) Gross weight of Machine (Approx.) / 7.5 MACHINE DIMENSIONS Elevation View Top View MACHINE MODEL A B C D E OPTIONAL ACCESSORIES 1) Electro Magnetic Chuck with Electronic Controller to have variable magnetic force & MAG-DEMAG arrangement. 2) Static Wheel Balancing Stand. 3) Coolant system with Magnetic separator / & Paper Band Filter. 4) Machine Lamp. 5) Auto Parallel Dressing Attachment. 6) Extra Wheel Flange unit. 7) Variable Spindle Speed. 8) Radius & Angular Wheel Truing Attachment. 9) Vice Plain, Sine, Swivel & Universal. 10) Demagnetizer. 11) Dust Collecting Unit. 12) Mist Collector. 13) Other possible Customisation. ** The manufacturer reserves the right to modify design, speciﬁcations, mechanisms etc. to improve the performance of any machine without notice. ** Photographs shown with Optional accessories. ** All dimensions are in. Classic Total Power

SERIES 8040 6040 8040 10040 10050 15050 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding

The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature.

solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor.

All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI.

Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test

NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system.

SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade.

Robust & Sturdy design for precise grinding results over long period of time.

3 SERIES BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes. The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature. In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor. Cross Movement i.e. Z-Axis is driven through Precision Ball Screw with Nut & A.C. Induction Motor. All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI. STANDARD ACCESSORIES 1) Grinding wheel 2) Grinding wheel ange unit 3) Wheel balancing mandrel 7) Operating Instruction Manual 8) Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation. NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system. MPG with increment of in Y-Axis. Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade. OPTIMUM ribbing for more stability with Maximum vibration damping capacity. Robust & Sturdy design for precise grinding results over long period of time. Precision Ground Guide ways with anti-friction Turcite B-lined material. No overhanging in Guide ways. Inﬁnitely variable Incremental Auto Cross Feed. Water Baf es to protect Cross Guide ways from coolant & grinding dust. Natural Air Cooled Hydraulic Power pack provided separately for easy servicing. Equipped with Rough, Finish & Spark out Auto Grinding cycles. Criss Cross grinding provision. Separate settable Auto cross feed for Rough & Finish grinding cycles. Imported Super Precision bearings packed with Grease for life. Perfect Squareness of all X,Y & Z Axes. Interlocks on Spindle Rotation/Magnetic Chuck.

4 TECHNICAL SPECIFICATIONS DESCRIPTION UOM 6040 Working Surface of the Table x x x x x 500 Max. Job size that can be Ground x x x x x 500 Max. Longitudinal Travel Max. Cross Traverse Electro-Magnetic Chuck x x x 400 Max. Spindle Centre from Table Surface Max. weight carrying capacity of the Table CAPACITY x x (Optional - 750) x 50 x x 50 x 127 SPEEDS & FEEDS Table Speed (Inﬁnitely variable) m/min 5-30 Power Cross traverse (Variable) /min /stroke Auto cross feed at each table reversal (Variable) Cross feed Graduation Vertical feed Power Elevation /min Vertical feed graduation (MPG) Vertical In Feed Amount (Settable) to Rpm 1400 GRINDING HEAD Speed of Grinding Spindle Size of Grinding wheel (D x W x B) Power of Grinding wheel x 40 x / 5.5 HYDRAULIC SYSTEM Working Pressure Kg/cm^2 14 Solenoid operated hydraulic power pack with facility to have soft table reversals. Power pack POWER OF HYDRAULIC PUMP Hydraulic Motor 3 / 2.2 Liters Tank Capacity GENERAL 11 / 8 16 / 12 Net weight of Machine (Approx.) Gross weight of Machine (Approx.) MACHINE DIMENSIONS Elevation View Top View MACHINE MODEL A B C D E OPTIONAL ACCESSORIES 1) Electro Magnetic Chuck with Electronic Controller to have variable magnetic force & MAG-DEMAG arrangement. 2) Static Wheel Balancing Stand. 3) Coolant system with Magnetic separator / & Paper Band Filter. 4) Machine Lamp. 5) Auto Parallel Dressing Attachment. 6) Extra Wheel Flange unit. 7) Variable Spindle Speed. 8) Radius & Angular Wheel Truing Attachment. 9) Vice Plain, Sine, Swivel & Universal. 10) Demagnetizer. 11) Dust Collecting Unit. 12) Mist Collector. 13) Other possible Customisation. ** The manufacturer reserves the right to modify design, speciﬁcations, mechanisms etc. to improve the performance of any machine without notice. ** Photographs shown with Optional accessories. ** All dimensions are in. Classic Total Power

SERIES 10060 15060 20060 60 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes.

mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation.

Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade.

5 SERIES BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes. The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature. In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor. Cross Movement i.e. Z-Axis is driven through Precision Ball Screw with Nut & A.C. Induction Motor. All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI. STANDARD ACCESSORIES 1) Grinding wheel 2) Grinding wheel ange unit 3) Wheel balancing mandrel 7) Operating Instruction Manual 8) Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation. NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system. MPG with increment of in Y-Axis. Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade. OPTIMUM ribbing for more stability with Maximum vibration damping capacity. Robust & Sturdy design for precise grinding results over long period of time. Precision Ground Guide ways with anti-friction Turcite B-lined material. No overhanging in Guide ways. Inﬁnitely variable Incremental Auto Cross Feed. Water Baf es to protect Cross Guide ways from coolant & grinding dust. Natural Air Cooled Hydraulic Power pack provided separately for easy servicing. Equipped with Rough, Finish & Spark out Auto Grinding cycles. Criss Cross grinding provision. Separate settable Auto cross feed for Rough & Finish grinding cycles. Imported Super Precision bearings packed with Grease for life. Perfect Squareness of all X,Y & Z Axes. Interlocks on Spindle Rotation/Magnetic Chuck.

6 TECHNICAL SPECIFICATIONS DESCRIPTION UOM CAPACITY Working Surface of the Table 1000 x 1500 x 2000 x 0 x Max. Job size that can be Ground 1000 x 1500 x 2000 x 0 x Max. Longitudinal Travel Max. Cross Traverse Electro-Magnetic Chuck Max. Spindle Centre from Table Surface Max. weight carrying capacity of the Table x 1500 x 525 (Optional - 750) 2 Nos x 2 Nos x SPEEDS & FEEDS Table Speed (Inﬁnitely variable) m/min Power Cross traverse (Variable) /min /stroke Auto cross feed at each table reversal (Variable) Cross feed Graduation /min Vertical feed graduation (MPG) Vertical In Feed Amount (Settable) to 0.09 Rpm 1400 Vertical feed Power Elevation GRINDING HEAD Speed of Grinding Spindle Size of Grinding wheel (D x W x B) Power of Grinding wheel 350 x 50 x x 50 x x 65 x / / / 11 HYDRAULIC SYSTEM Working Pressure Kg/cm^ Solenoid operated hydraulic power pack with facility to have soft table reversals. Power pack POWER OF HYDRAULIC PUMP Hydraulic Motor 3 / 2.2 Liters Tank Capacity GENERAL 15 / / / / 18 Net weight of Machine (Approx.) Gross weight of Machine (Approx.) MACHINE DIMENSIONS Elevation View Top View MACHINE MODEL A B C D E OPTIONAL ACCESSORIES 1) Electro Magnetic Chuck with Electronic Controller to have variable magnetic force & MAG-DEMAG arrangement. 2) Static Wheel Balancing Stand. 3) Coolant system with Magnetic separator / & Paper Band Filter. 4) Machine Lamp. 5) Auto Parallel Dressing Attachment. 6) Extra Wheel Flange unit. 7) Variable Spindle Speed. 8) Radius & Angular Wheel Truing Attachment. 9) Vice Plain, Sine, Swivel & Universal. 10) Demagnetizer. 11) Dust Collecting Unit. 12) Mist Collector. 13) Other possible Customisation. ** The manufacturer reserves the right to modify design, speciﬁcations, mechanisms etc. to improve the performance of any machine without notice. ** Photographs shown with Optional accessories. ** All dimensions are in. Classic Total Power

SERIES 20070 70 15080 20080 80 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes.

7 SERIES BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes & 5-Axes. The 3-Axes MODEL provides Automation in all three X, Y & Z Axes with vertical Prograable Auto down feed feature. In 5-Axes, Auto parallel dressing with Auto Compensation is included along with above mentioned Automation of 3-Axes. Longitudinal Movement i.e. X Axis is driven by Hydraulic cylinder with end cushioning device for good damping effects at the end of each Stroke & with solenoid valves for soft table reversals. Vertical Movement i.e. Y-Axis is driven by means of Precision Ball Screw with Nut through AC Servo motor. Cross Movement i.e. Z-Axis is driven through Precision Ball Screw with Nut & A.C. Induction Motor. All the data for grinding can be settable in a 7-inch Prograable Colour Touch Screen HMI. STANDARD ACCESSORIES 1) Grinding wheel 2) Grinding wheel ange unit 3) Wheel balancing mandrel 7) Operating Instruction Manual 8) Grinding wheel clamping & Extraction bolt 4) Set of wrenches 5) Table mounted wheel dressing block 6) European Standard DIN 8632 Test Chart KEY FEATURES AC Servo Drive with Precision Ball Screw for Y-Axis. Auto parallel Dressing with Auto Compensation. NC Controlled Auto grinding cycles with Prograable Colour Touch screen. Centralised Automatic Lubrication system. MPG with increment of in Y-Axis. Retract Option, Cycle Hold, Traverse grinding cycle & Plunge cycle as Standard features. SALIENT FEATURES Moving Column Design. Naturally seasoned Castings equivalent to Meehanite grade. OPTIMUM ribbing for more stability with Maximum vibration damping capacity. Robust & Sturdy design for precise grinding results over long period of time. Precision Ground Guide ways with anti-friction Turcite B-lined material. No overhanging in Guide ways. Inﬁnitely variable Incremental Auto Cross Feed. Water Baf es to protect Cross Guide ways from coolant & grinding dust. Natural Air Cooled Hydraulic Power pack provided separately for easy servicing. Equipped with Rough, Finish & Spark out Auto Grinding cycles. Criss Cross grinding provision. Separate settable Auto cross feed for Rough & Finish grinding cycles. Imported Super Precision bearings packed with Grease for life. Perfect Squareness of all X,Y & Z Axes. Interlocks on Spindle Rotation/Magnetic Chuck.

8 TECHNICAL SPECIFICATIONS UOM Working Surface of the Table 2000 x x x x x 800 Max. Job size that can be Ground 2000 x x x x x 800 Max. Longitudinal Travel Max. Cross Traverse Electro-Magnetic Chuck Max. Spindle Centre from Table Surface Max. weight carrying capacity of the Table DESCRIPTION CAPACITY Nos x Nos x x Nos x Nos x SPEEDS & FEEDS Table Speed (Inﬁnitely variable) m/min 7-30 Power Cross traverse (Variable) /min /stroke Auto cross feed at each table reversal (Variable) Cross feed Graduation Vertical feed Power Elevation /min Vertical feed graduation (MPG) Vertical In Feed Amount (Settable) to Rpm 1400 GRINDING HEAD Speed of Grinding Spindle Size of Grinding wheel (D x W x B) Power of Grinding wheel 400 x 50 x / x 80 x x 65 x / / 15 HYDRAULIC SYSTEM Working Pressure Kg/cm^2 20 Solenoid operated hydraulic power pack with facility to have soft table reversals. Power pack POWER OF HYDRAULIC PUMP Hydraulic Motor Tank Capacity 7.5 / 5.5 Liters GENERAL 20 / / / / / 28 Net weight of Machine (Approx.) Gross weight of Machine (Approx.) MACHINE DIMENSIONS Elevation View MACHINE MODEL Top View A B C D E OPTIONAL ACCESSORIES 1) Electro Magnetic Chuck with Electronic Controller to have variable magnetic force & MAG-DEMAG arrangement. 2) Static Wheel Balancing Stand. 3) Coolant system with Magnetic separator / & Paper Band Filter. 4) Machine Lamp. 5) Auto Parallel Dressing Attachment. 6) Extra Wheel Flange unit. 7) Variable Spindle Speed. 8) Radius & Angular Wheel Truing Attachment. 9) Vice Plain, Sine, Swivel & Universal. 10) Demagnetizer. 11) Dust Collecting Unit. 12) Mist Collector. 13) Other possible Customisation. ** The manufacturer reserves the right to modify design, speciﬁcations, mechanisms etc. to improve the performance of any machine without notice. ** Photographs shown with Optional accessories. ** All dimensions are in. Classic Total Power

Clausing Precision Manual Surface Grinders

Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with