PUBLIC AUCTION CLOSING LOCATION MARY S RIVER LUMBER

Transcription

1 NO MINIMUM - NO RESERVE - SAWMILL - ROLLING STOCK - TOOLS & STORES PUBLIC AUCTION CLOSING LOCATION MARY S RIVER LUMBER 9AM - WEDNESDAY - APRIL 5 Preview 8-4pm, Tuesday, April US 20, Philomath, OR USNR 4TA JOHN DEERE 744J BLACK CLAWSON 6120 SALEM 50 5-ARM RING DEBARKER James G. Murphy Co. (2) ARMSTRONG #4LH S MURPHYAUCTION.COM

2 MARY S RIVER LUMBER - PHILOMATH, OR BARKER SALEM 50 5-ARM RING DEBARKER W/RELIANCE 125 HP/1887 RPM RING FEED DRIVE W/YASKAWA A1000 AC DRIVE, APPROX. 75 HP FEED DRIVE MOTOR W/YASKAWA F7 AC DRIVE W/BRAKES, LARGE LOG BYPASS, ALLIGATOR FEED CHAIN W/HOLD DOWN, APPROX STRAND H124 INFEED LOG HAUL, APPROX STRAND H124 OUTFEED LOG HAUL, 5-ARM KICKER, S-DRIVE W/DRIVE MOTOR, CAB & CONTROLS, SPARE PARTS WHOLE LOG CUT OFF SAW L&M 72 INSERT TOOTH WHOLE LOG CHOP SAW W/APPROX. 75 HP MOTOR W/BENSHAW RX2E KP SOLID STATE STARTER, CRADLE, L&M 60 BAR TYPE WHOLE LOG CHOP SAW W/15 HP MOTOR APPROX STRAND H124 INFEED LOG HAUL, S-DRIVE W/DRIVE MOTOR, 27 3-STRAND H124 OUTFEED LOG HAUL W/(6) LOG STOPS & 4-ARM KICKER (80 HP HYDRAULIC UNIT, OPTIBUCK SCAN SYSTEM W/(7) CAMERAS 8-20, SPARE SAW & CHAINS, CAB & CONTROLS CARRIAGE & DRIVE - SCANNING SALEM 40 X20 3-KNEE RH TEMPOSONIC POSITIONED HYDRAULIC OP- ERATED SHOTGUN CARRIAGE, LOG TURNERS & DOGS, (6) UHMW TRUCKS, PANTOGRAPH, RAIL, TYRONE BERRY SMA HP HYDRAULIC DRIVE, 10 HP SETWORKS HYDRAULIC UNIT, CAB & CONTROLS, SPARE SHOTGUN CYLINDER & PARTS, S/N: INOVEC YIELDMASTER 20 CARRIAGE OPTIMIZER W/STEREOSCAN 3D LOG SCANNER, CONTROLS HEADRIG BANDMILL MCDONOUGH 6 RH DOUBLE CUT HEADRIG BANDMILL W/AIR STRAIN, BROOKS 200 HP/700 RPM DRIVE MOTOR W/BENSHAW RX2E 250 HP SOLID STATE STARTER, 30 X9 FEED THRU BELT W/DRIVE MOTOR, APPROX. 36 X20 OUTFEED ROLLCASE, SPARE SAW & PARTS, S/N: 72M-2498D SLABBER - LOG TURNER CM&E 64RH-8 KEY KNIFE TEMPOSONIC POSITIONED SLABBER W/ APPROX. 250 HP MOTOR, BENSHAW RX2E 250 HP SOLID STATE STARTER, 30 HP HYDRAULIC UNIT, KNIFE HOLDERS & PARTS, S/N: 487 HYDRAULIC OPERATED LOG TURNER W/CYLINDER, 7-ARM LOG STOP & LOADER, (2) APPROX. 50 X12 BELT TRANSFERS W/HYDRAULIC DRIVES MurphyLIVE is our online bidding tool that allows customers to bid from anywhere. For registration info goto murphyauction.com EDGERS - SCANNERS (SAWMILL) 2006 USNR 4TA36 4 X36 TOP SPLINED BOARD EDGER W/APPROX. 300 HP DRIVE MOTOR W/BENSHAW RX2E 300 HP SOLID STATE STARTER, 4-SAW SETWORKS, LUBE, OIL & WATER SYSTEM, 2006 USNR 24 TEMPOSONIC POSITIONED SHARP CHAIN FEED TABLE W/INFEED TRANSFER & TIPPLE, X26 OUTFEED BELT W/TEMPOSONIC EDGE PICKING FINGERS, ALLEN BRADLEY RS LOGIX 5561 PLC, (2) ALLEN BRADLEY REMOTE PLC S, RMC 150 MOTION CONTROLLER, ALLEN BRADLEY CENTERLINE 5-SECTION MCC W/(8) ALLEN BRADLEY PF70 DRIVES, 80 HP DOUBLE PUMP HYDRAULIC UNIT, SPARE SAWS & PARTS, S/N: USNR 20 TRANSVERSE EDGER SCANNER W/(10) LMI/DYNAVISION B8000 SCAN HEADS, 24 PASS, SERVER RACK & CONTROLS, STRAND X 81X LUGGED SCANNER FEED TABLE W/EVEN END ROLLCASE, 2006 USNR STRAND X 81X LUG LOADER, UNSCRAMBLER W/(2) SETS OF KICKERS, MOTOR TO REX DRIVE, 10 8-STRAND X H78 INFEED TABLE W/DRIVE MOTOR, YASKAWA F7 & A1000 AC DRIVES SALEM 8 X72 COMBINATION GANG EDGER W/8 X42 4-SAW SHIFTING BOARD SIDE & 8 X20 GANG CLUSTER, IES 250 HP/1800 RPM ARBOR DRIVE MOTOR W/BENSHAW RX2E 300 HP SOLID STATE STARTER, MOTOR TO REX & MOTOR TO REDUCER FEED DRIVES, MINI LASER LIGHTS, APPROX. 20 SPLIT ROLL INFEED ROLLCASE W/(12) ROLLS, JUMP TRANSFERS, KICKERS, (2) APPROX. 36 X30 OUTFEED BELTS W/(1) SET OF TEMPOSONIC POSITIONED FINGERS (BOARD SIDE), APPROX. 20 X60 OUTFEED ROLLCASE (GANG SIDE), ALL DRIVE MOTORS, YASKAWA F7 & A1000 AC DRIVES, ALLEN BRADLEY 2-SECTION MCC W/(13) SWITCHES, ALLEN BRADLEY RS LOGIX 5561 PLC W/(5) MODULES & ALLEN BRADLEY COMPACT LOGIX L35E W/(9) MODULES, 40 HP DOUBLE PUMP HYDRAULIC UNIT & 20 HP LUBE, OIL & WATER UNIT, SPARE SAWS & PARTS, S/N: WAITE 8 X48 SPLINED TOP ARBOR GANG EDGER W/TOSHIBA 400 HP/1750 RPM ARBOR DRIVE MOTOR W/BENSHAW RX2E 400 HP SOLID STATE STARTER, CHROMED KNURLED FEED ROLLS W/MOTOR TO REDUCER DRIVE, PRESS ROLLS, (2) LASER LIGHTS, APPROX. 20 INFEED ROLLCASE W/LINEBAR, (8) 8-1/2 X48 ROLLS, 8 4-STRAND JUMP TRANSFER, CANT KICKERS, APPROX. 20 OUTFEED ROLLCASE W/(9) 6-1/2 X48 ROLLS, DRIVE MOTORS, SPARE SAWS & PARTS RESAWS (SAWMILL) (2) SALEM 5 STACKED SINGLE HORIZONTAL BAND RESAWS W/150 HP MOTORS, 25,000 LB. AIR STRAIN, RESAW #2 INSTALLED IN 2007 HAS TOSHIBA 150 HP/1180 RPM ARBOR DRIVE MOTOR, S/N: , RESAW #1 HAS WESTINGHOUSE 150 HP/705 RPM ARBOR DRIVE MOTOR, S/N: L , BOTH SAWS ARE SPACED 6 APART, 30 CHROMED KNURLED FEED THRU ROLLS W/CHAIN DRIVEN HOLD DOWN/TOP FEED ROLLS W/HYDRAULIC MOTORS, APPROX. 20 INFEED ROLLCASE W/LINEBAR, BENSHAW RX2E 150 HP SOLID STATE STARTER, ALLEN BRADLEY MICROLOGIX 1400 PLC W/(4) MODULES, 70 HP DOUBLE PUMP HYDRAULIC UNIT, SPARE SAWS & PARTS FOR MORE DETAILS VISIT US AT MURPHYAUCTION.COM

3 MARY S RIVER LUMBER - PHILOMATH, OR TRIMMER - SCANNER - LUG LOADER - TILT HOIST LANDEAST MACHINERY 20 INDIVIDUALLY MOTORIZED RH TRIMMER, PASS 24, (11) 7.5 HP AIR LIFT SAWS, ZERO SAW, HYDRAULIC ACTIVATED CLAMP GATE SYSTEM, APPROX STRAND 81X LUGGED FEED THRU TRANSFER W/MOTOR TO REX DRIVE, YASKAWA V1000 & (2) GFD 315/V7 DRIVES, ALLEN BRADLEY PLC W/(12) MODULES, 15 HP DOUBLE PUMP HYDRAULIC UNIT, SPARE SAWS & PARTS, S/N:8114 INOVEC/USNR 20 TRIM MASTER SCANNER, 24 PASS, (10) LMI DYNAVISION M SCANNERS, STRAND 81X LUGGED SCANNER TRANSFER W/EVEN END ROLLCASE, SERVER RACK, SPARE SCAN HEAD PLC 200N TONG DOG LUG LOADER W/15 3-SECTION X 8-STRAND 81X INFEED TRANSFER W/8-ARM TIPPLE, YASKAWA F7 DRIVE, 6 7-STRAND 81X BACK LOG TRANSFER W/EVEN END ROLLCASE & CHAIN16 5-ARM X 42 MECHANICAL RE-ENTRY TILT HOIST W/GEARHEAD MOTOR W/BRAKE HOG - CHIPPERS MONTGOMERY 45CSKCER BLO-HOG W/GE 350 HP/1175 RPM ARBOR DRIVE MOTOR W/ALLEN BRADLEY SMC DIALOG PLUS DRIVE, SPARE ARBOR, S/N: 1873 BLACK CLAWSON 6120 SLANT DISC CHIPPER W/150 HP DRIVE MOTOR W/BENSHAW RX2E 150 HP SOLID STATE STARTER, HORIZONTAL INFEED, BOTTOM DISCHARGE, SPARE REBUILT DISC BLACK CLAWSON 6120 SLANT DISC CHIPPER W/APPROX. 150 HP MOTOR ACROWOOD 4210 RE-CHIPPER W/50 HP MOTOR, DROP FEED, TOP OUTFEED, SPARE REBUILT DISC CHIP SCREEN - VIBRATORY CONVEYORS (SAWMILL) SALEM 10 X10 2-DECK CHIP SCREEN, SPARE SCREENS MILL POWER 24 X53 BALANCED VIBRATORY CONVEYOR, 440 RPM, 1 STROKE, MDI CR85 METAL DETECTOR, S/N: , 5 FIBERGLASS TROUGH MILL POWER 18 X41 VIBRATORY CONVEYOR W/5 FIBERGLASS TUB, MDI CCW65A METAL DETECTOR, S/N: 1570 MILL POWER 18 X86 VIBRATORY CONVEYOR CHIP BINS - SURGE BIN (2) CAROTHERS APPROX. 24-UNIT HYDRAULIC OPERATED CHIP BINS PEERLESS 24-UNIT HYDRAULIC OPERATED CHIP BIN APPROX. 11 W X 15 L X 12 H SURGE BIN COMPRESSORS - DRYER - AIR RECEIVER - TANNER TANK (SAWMILL) 1997 QNW-1011-D ROTARY SCREW COMPRESSOR, 200 HP, AIR COOLED, SIEMENS STARTER, S/N: C 1993 QNW F25L TANK MOUNTED ROTARY SCREW COMPRESSOR, 25 HP, S/N: C PNEUMATECH PE2100 HEAT REACTIVATED DUAL TOWER AIR DRYER, 2100 SCFM, SILVAN/PARKER IN LINE FILTERS, S/N: 0307-S APPROX. 30 X60 VERTICAL TANK AIR RECEIVER FROSTO TANNER TANK TRAILER LOADER - SCALES (SAWMILL) ROBBINS & MEYERS 5-TON RATED TRAILER LOADER RICE LAKE ROUGH DECK FXB 20,000 LB. X 5 LB. PLATFORM SCALE W/DIGITAL READOUT SCRAGG MILL 4-SAW SCRAGG LINE W/(2) 100 HP ARBOR DRIVE MOTORS, (2) 75 HP POSITIONED CHIPPING HEADS, TEMPOSONIC POSITIONED SHARP CHAIN W/THUMPER & POSITIONING ROLLS, HYDRAULIC UNIT, CAB & CONTROLS (NOT INSTALLED) TRANSFERS - CONVEYORS - ROLLCASES (40±) TRANSFERS TO 94 (30±) CONVEYORS TO 100 (20±) ROLLCASES TO 30 LOG DECKS & HAULS 32 6-STRAND WR124 SPLIT INFEED LOG DECK, (2) 3-ARM LOG STOP & LOADERS, (2) DRIVE MOTORS 24 6-STRAND WR124 X-OVER LOG DECK, (2) 3-ARM LOG STOP & LOADERS, (2) DRIVE MOTORS 28 8-STRAND H82 INFEED LOG DECK (TO HEADRIG) 45 3-STRAND WR124 INFEED LOG HAUL (TO DEBARKER) 38 3-STRAND WR124 OUTFEED LOG HAUL (FROM DEBARKER) W/5-ARM LOG KICKER 28 3-STRAND WR124 INFEED LOG HAUL (TO CHOP SAW) 30 3-STRAND WR124 LOG HAUL (FROM CHOP SAW), 3 LENGTH STOP & 6-ARM 8 TO 18 STOPS FILING & GRINDING ROOM (2) ARMSTRONG #4LH BANDSAW SHARPENERS W/DIGICAM, CLAMP, STANDS, DUSTKOP, S/N: & 1254 ARMSTRONG #2LH BANDSAW SHARPENER W/DIGICAM, CLAMP, STANDS, DUSTKOP JACOBSEN JM2000 STELLITE TIPPER & ANNEALER, S/N: 2609 WRIGHT 1904 QUAD HEAD STELLITE SIDE GRINDER, S/N: E3905 SIMONDS OPTIMATIC RM0880 BANDSAW LEVELER, S/N: (2) ARMSTRONG #4 BANDSAW STRETCHER ROLLS, ANVIL, STAND & YASKAWA DRIVES WOOD SEMI-AUTO TOOTH SETTER S (2) WRIGHT MINI BANDSAW SHARPENERS WRIGHT TALON P-1C CNC PROFILE SHARPENER, S/N: P-1C WRIGHT W350 AUTOMATIC DUAL SIDE GRINDER ARMSTRONG #25 CIRCLE SAW SHARPENER, S/N: ARMSTRONG #16 CIRCLE SAW SHARPENER, S/N: ARMSTRONG #54 CIRCLE SAW SHARPENER ARMSTRONG 3-10C CIRCLE SAW STRETCHER ROLL, S/N: 6400 PRECISION HUSKY ROTO-CHIP KNIFE GRINDER IMW 240 GUIDE RESURFACER ARMSTRONG #4RH BANDSAW SHARPENER, S/N: (NOT INSTALLED) ARMSTRONG #2LH BANDSAW SHARPENER (NOT INSTALLED) ARMSTRONG #16 CIRCLE SAW SHARPENER (NOT INSTALLED)

4 MARY S RIVER LUMBER - PHILOMATH, OR WRIGHT P-1 PROFILE SHARPENER, S/N: C9702 (NOT INSTALLED) HOE GUIDE MILL (NOT INSTALLED) BARNHART NO. 51 BAND WHEEL GRINDER, BABBIT POT, GUIDE PRESSES, GUIDES & JIGS, CHAIN SHARPENER, BANDSAW SHEAR, TENSION GAUGE GRINDER, GUIDE MILLS, LARGE QUANTITY OF HEADRIG, RESAW, EDGER & TRIMMER SAWS, CHIPPER KNIVES, ANVILS & GRINDING WHEELS ELECTRICAL 2010 CUTLER HAMMER EATON 3000 AMP 2-SECTION POW-R-LINE SWITCHBOARD W/MAGNUM DS-MDS AMP BREAKER 2010 CUTLER HAMMER EATON 3000 AMP 2-SECTION POW-R-LINE SWITCHBOARD W/1600 AMP BREAKER GE SPECTRA SERIES 800 AMP 1-SECTION SWITCHBOARD (9) BENSHAW RX2E SOLID STATE STARTERS TO 400 HP ALLEN BRADLEY 7-SECTION MCC W/(30) SWITCHES ALLEN BRADLEY 5-SECTION MCC W/(18) SWITCHES & (8) ALLEN BRADLEY POWER FACTOR 70 DRIVES ALLEN BRADLEY 2-SECTION MCC W/(13) SWITCHES CUTLER HAMMER FREEDOM SECTION MCC W/(5) SWITCHES CUTLER HAMMER FREEDOM 4-SECTION MCC W/(23) SWITCHES (14) SECTIONS OF UNINSTALLED ALLEN BRADLEY MCC W/(50) SWITCHES (4) ALLEN BRADLEY RS LOGIX 5561 PLC S ALLEN BRADLEY COMPACT LOGIX L35E PLC ALLEN BRADLEY COMPACT LOGIX L31E PLC ALLEN BRADLEY COMPACT MICROLOGIX 1400 PLC ALLEN BRADLEY SLC500 PLC ALLEN BRADLEY 5/20 PLC NUMEROUS YASKAWA A1000, F7-VX & F7 AC DRIVES SPARE MOTORS TO 400 HP, STARTERS, DISCONNECTS, TRANSFORM- ERS, LIGHTING PANELS, FUSES, CONTACTS, LIGHTING, CONTROL PANELS, FOOT PEDALS, CIRCUIT BOARDS, BREAKERS, COILS, LARGE WIRE & CONDUIT LOT MISCELLANEOUS MACHINERY BREWCO 36 HORIZONTAL SINGLE BAND RESAW W/20 HP MOTOR (NOT INSTALLED) (4) WEST PLAINS 36 HORIZONTAL SINGLE BAND RESAWS W/20 HP MOTOR (NOT INSTALLED) BREWCO 24 HORIZONTAL SINGLE BAND RESAW (NOT INSTALLED) 8 ADJUSTABLE DOG EAR MACHINE (NOT INSTALLED) 6 3-SAW TRIMMER W/INFEED (NOT INSTALLED) 4 2-SAW CHOP STATION 6 2-ARM X 50 MECHANICAL STACKER W/INFEED (NOT INSTALLED) 10 7-ARM X 48 MECHANICAL TILT HOIST (NOT INSTALLED) SCISSOR LIFT W/GRAVITY ROLLS (NOT INSTALLED) (14) 48 X20 LUMBER PULLS (6) 48 X16 LUMBER PULLS (30±) CRAZY WHEEL LUMBER PULL CARTS (14) STRAIGHT WHEEL LUMBER PULL CARTS APPROX. (25±) RACKS & BUNDLES OF 48 STICKERS LARGE QUANTITY OF 12 X12 STACKING TIMBERS MILLWRIGHTS SHOP TURN PRO G515V UNIVERSAL CNC MILL KONG FU 3S RADIAL ARM DRILL SIDNEY 22 X96 ENGINE LATHE WELLSAW 1000 METAL CUTTING BANDSAW MILLER TRAILBLAZER 302 WELDER/GENERATOR, MILLERMATIC 252 WIRE FEED WELDER, SRH444 & SRH222 WELDERS, BUX MAG DRILL, AIR & POWER TOOLS, RIGGING SHOP PRESS, KEYWAY CUTTER, DRILL PRESSES, OXY/ACETYLENE SETS, PARTS WASHER, DOUBLE END GRINDERS, RIDGID 300 THREADER & LANDA PRESSURE WASHER MILL STORES BEARINGS, CHAIN, CYLINDERS, VALVES, BELTS, COUPLERS, SHAFTING, ROLLS, RODS, SPROCKETS, HYDRAULIC FITTINGS, HYDRAULIC PUMPS & MOTORS, BUSHINGS, STEEL STOCK, CONDUIT, PIPE FITTINGS, NUTS & BOLTS, HYDRAULIC HOSE, WELDING SUPPLIES, UHMW, CLEAN UP TOOLS, STEEL TABLES & INTERCOMS TRAILER LOADER - FUEL TANKS OAK STREET APPROX GALLON DOUBLE WALL DIESEL TANK W/TOKHEIM PUMP OAK STREET APPROX GALLON DOUBLE WALL TANK AVAILABLE FOR IMMEDIATE PURCHASE 2007 BRUNETTE/VALON KONE KODIAK 363FS-920, 36 6-ARM AIR SEAL RING DEBARKER W/CEDAR CUTTER ARMS *located in Lebanon, OR 2007 BARKO 595ML MAGNUM STATIONARY ELECTRIC LOG LOADER W/360-DEGREE SWING, 36 LIVE HEEL BOOM W/ROBOTEC 4552HD W/RT-504 GRAPPLE *located in Montesano, WA FOR MORE DETAILS VISIT US AT MURPHYAUCTION.COM

5 ROLLING STOCK 2007 CAT 324 FM TRACK MOUNTED HEEL BOOM LOG LOADER W/CAT C7 ACERT 188 HP DIESEL ENGINE, FOREST MACHINE HYDRAULICS & CAB DESIGN, CAT SWIVEL GRAPPLES, CLIMATE CONTROL, AIR RIDE SEAT, STICK CYLINDER & SHOE GUARDS, TRIPLE GROUSER TRACKS, HOUR METER READS: , S/N: CAT0324DHJLS JOHN DEERE 892D-LC TRACK MOUNTED HEEL BOOM LOG LOADER W/JOHN DEERE 205 HP TURBO DIESEL ENGINE, SWIVEL GRAPPLE, YOUNG BOOM, 24 DOUBLE GROUSER TRACKS, HOUR METER READS: , S/N: CK392DL JOHN DEERE 744J Z-BAR RUBBER TIRE WHEEL LOADER W/CWS FORKS, JOHN DEERE 266 HP DIESEL ENGINE, AUTOMATIC POWER SHIFT, TIRES, HOUR METER READS: , S/N: DW744JX CAT 980F RUBBER TIRE WHEEL LOADER W/MEDFORD FORKS, CAT HP DIESEL ENGINE, AUTOMATIC POWER SHIFT, TIRES, HOUR METER READS:, , S/N: 80J HYSTER H120FT FORKLIFT, 11,500 LB. CAPACITY, PROPANE, ELECTRONIC POWER SHIFT, 157-1/2 2-STAGE MAST W/SIDE SHIFT, 6 X42 FORKS, DUAL PNEUMATIC TIRES, HOUR METER READS: 2884, S/N: S005V04266M 1983 HYSTER H80E FORKLIFT, APPROX LB. CAPACITY, PROPANE, STAGE MAST, 7 X44 FORKS, DUAL PNEUMATIC TIRES, HOUR METER READS: 2261, S/N: D005D01786D 2007 HYSTER S60XM FORKLIFT, 5700 LB. CAPACITY, PROPANE, MONOTROL, STAGE MAST W/SIDE SHIFT, 7 X46 FORKS, SOLID TIRES, HOUR METER READS: 10,609, S/N: D1B7V27985A HYSTER S60E FORKLIFT, APPROX LB. CAPACITY, PROPANE, MONOTROL, 2-STAGE MAST W/SIDE SHIFT, 7 X46 FORKS, SOLID TIRES, HOUR METER READS: 6926, S/N: N/A JOHN DEERE 380 ROUGH TERRAIN FORKLIFT, 4000 LB. CAPACITY, 3-CYLINDER 48 HP DIESEL ENGINE, APPROX STAGE MAST W/SIDE SHIFT, 7 X56 FORKS, PNEUMATIC TIRES, HOUR METER READS: 5082, S/N: T SNORKEL WILDCAT ECONOMY SPL2660 AERIAL WORK PLATFORM, 26 LIFT, 600 LB. CAPACITY, 52 X80 PLATFORM, 24V ELECTRIC, S/N: BG51738K KENWORTH T800 TANDEM AXLE TRACTOR W/DETROIT SERIES 60 DIESEL ENGINE, EATON FULLER TRANSMISSION, DUAL ALUMINUM FUEL TANKS, PRO TECH HEADACHE RACK, ALUMINUM WHEELS, ODOMETER READS: 412,391 MILES, VIN: 1XKDDR9X1WR KENWORTH W900A TANDEM AXLE LOG TRUCK W/CUMMINS DIESEL ENGINE, EATON FULLER TRANSMISSION, LOG BUNK, HEADACHE RACK, ODOMETER READS: 666,671 MILES PEERLESS TANDEM AXLE LOG TRAILER W/LOG BUNK, S/N: INTERNATIONAL 4900 DUAL WHEEL TRUCK W/GAS ENGINE, MANUAL TRANSMISSION, 16 DUMP BOX W/PTO, ODOMETER READS: 157,395 MILES, VIN: 1HTSDZ4P6LH CHEV C60 TANDEM AXLE TRUCK W/GAS ENGINE, MANUAL TRANSMISSION, APPROX GALLON POLY WATER TANK, GAS PUMP, BACK SPRAYER, HOSE REEL, ODOMETER READS: 98,260 MILES, VIN: CCE632V FORD DUAL WHEEL BOOM TRUCK, GAS ENGINE, MANUAL TRANSMISSION, UTILITY BODY W/DMS LB. BOOM, DUAL WHEEL, ODOMETER READS: 4799 MILES, VIN: F61CR UTILITY TYPE FS2W 40 TANDEM AXLE FLATBED TRAILER, 285R/75R245 TIRES, VIN: 1UYFS2407KC FLATBED TRAILER, PENTEL HITCH, 285R/75R245 TIRES 1992 FORD F150XLT PICKUP, GAS ENGINE, AUTOMATIC TRANSMISSION, ODOMETER READS: 240,895 MILES, VIN: 1FTDF15H8PLA GMC SIERRA SL-3500 PICKUP, GAS ENGINE, AUTOMATIC TRANSMISSION, SERVICE TYPE BODY, ODOMETER READS: 27,373 MILES, VIN: 1GDJC34N8LE FORD F250XL PICKUP, GAS ENGINE, MANUAL TRANSMISSION, FUEL TANK & PUMP, ODOMETER READS: 8352 MILES, VIN: 2FTEF25HCGCCA44286 BUILDING APPROX. 24,000 SQ. FT. SAWMILL BUILDING James G. Murphy Co. TERMS AND CONDITIONS 10% BUYERS PREMIUM ON ALL ITEMS 13% BUYERS PREMIUM ON ALL ONLINE PURCHASES Due to insurance and safety reasons, children under 12 cannot be admitted PAYMENT: Full payment must be made by no later than 4 pm, April 7th. Payment must be made by CASH, CASHIERS CHECK, WIRE TRANSFERS, MASTERCARD OR VISA ONLY. Checks are accepted ONLY with Bank Letter of Guarantee. REMOVAL: No purchases may be removed during the auction unless announced by the auctioneer. Small items must be removed by 4:00 PM, Friday, April 7th. ALL EQUIPMENT MUST be removed no later than 4:00 PM, Friday, July 28th, (REMOVAL DEADLINES MAY BE MODIFIED BY AUCTIONEER S ANNOUNCEMENT). Removal hours: 8:00 AM 4:00 PM, Monday through Friday. NO WEEKEND OR HOLIDAY REMOVAL. Upon award of bid buyers and/or their contractors take responsibility for any environmental issues they create (e.g. spilled hydraulic oil). Dismantlers are required to provide their own materials to contain & clean up any oil spillage. Insurance: Dismantlers, contractors or buyers removing equipment are required to provide $1,000, dollar General Liability Insurance certificate showing the James G Murphy Company and Mary s River Lumber as the additional insured parties. Insurance certificate and proof of workman s compensation compliance must be on file at sale site or with the James G Murphy Co. before dismantling commences. FIRE PROTECTION POLICY: NO CUTTING WITHOUT A PERMIT - Dismantlers required to provide their own fire hose & spray nozzles. - A signed burning permit issued to dismantlers will be displayed in cutting area - A limited number of burning permits will be issued. One burning permit per hose. - Each man using a cutting torch will have one firewatch with a hose while cutting - Firewatch to wet down before during and after cutting. - Firewatch to stay in area one hour after cutting is completed - Cutting hours are from 8 AM to 3 PM Warranty Disclaimer: ALL SALES ARE FINAL. All items are being sold As Is, Where Is, With All Faults and without any warranties as to merchantability of fitness for a particular purpose. The principal, the auctioneer, the advertising coordinator, and any of their agents makes no express or implied warranties of any type. Complete terms and conditions of sale will be available at the time of sale. All information was obtained from sources deemed reliable. Although every precaution has been taken to ensure accuracy, the principal, the James G Murphy Co., the advertising coordinator, and all of their agents shall not be responsible for any errors or omissions therein. It is for this reason that we recommend that all items be thoroughly inspected prior to the point of sale. Announcements made by the auctioneer at the time of sale take precedence over printed matter. Auctioneer reserves the right to sell accessories parts or attachments on a separate and/or aggregate basis ABSENTEE BIDS: Absentee bids will be accepted with 25% Deposit.

6 James G. Murphy Co. P.O. Box 82160, Kenmore, WA PRESORTED FIRST CLASS MAIL U.S. POSTAGE PAID SEATTLE, WA PERMIT NO CAT 324 FDM MARY S RIVER LUMBER 9AM - WEDNESDAY - APRIL 5 Preview 8-4pm, Tuesday, April 4 MURPHYAUCTION.COM Phone NO MINIMUM - NO RESERVE - SAWMILL - ROLLING STOCK - TOOLS & STORES PUBLIC AUCTION CLOSING LOCATION MARY S RIVER LUMBER 9AM - WEDNESDAY - APRIL 5 Preview 8-4pm, Tuesday, April US 20, Philomath, OR James G. Murphy Co MURPHYAUCTION.COM