Innovation in Fluid Power. Institute for Fluid Power Drives and Controls Institut für fluidtechnische Antriebe und Steuerungen
|
|
- May Thomas
- 6 years ago
- Views:
Transcription
1 Innovation in Fluid Power Institute for Fluid Power Drives and Controls Institut für fluidtechnische Antriebe und Steuerungen
2 RWTH Aachen University Facts and Figures Established in faculties, 260 institutes (55 in mech. engineering) 9,191 employees (538 professors) 42,298 students (12,050 in mech. engineering) Budget: Mio. 2 of 32
3 Institute for Fluid Power Drives and Controls Testing facilities of 1300 m² including: - More than 50 test rigs for hydraulic and pneumatic components - 6 machine beds on isolated foundation - 5 isolated test chambers with machine beds - Anechoic room on isolated foundation, m², 90/200 kw with energy recovery - Climatic test chamber measuring m³, -70 C to +70 C, - Test rigs for ageing of hydraulic fluids and components 25 scientific staff members working in various fields of fluid power applications Qualification of young post graduate engineers, students and apprentices Competence in simulation and special test equipment for hydrostatic machines 3 of 32
4 Institute for Fluid Power Drives and Controls Testing Technology facilities Transfer of 1300 m² including: - More than 50 test rigs for hydraulic and pneumatic components - Fundamentals of Fluid Power 6 machine beds on isolated foundation - Servohydraulics 5 isolated test chambers with machine beds - Fluid power technology for mobile application Anechoic room on isolated foundation, - Simulation of Fluid Power Systems m, 90/200 kw with energy recovery - Lubricants and pressure media Climatic test chamber measuring - Design of fluid power machines and m, -70 C to +70 C, components - Test rigs for ageing of hydraulic fluids and components - Industrial conferences - International conference on Fluid Power Lectures and courses Conferences 22 scientific staff members working in various fields of fluid power applications Qualification of young post graduate engineers, students and apprentices Competence in simulation and special test equipment for hydrostatic machines 4 of 32
5 Personnel Structure Research groups 25 Technic-administrative departments 22 Aug of 32
6 Budget 6 of 32
7 References 7 of 32
8 Research Groups 8 of 32
9 Tribology and Fluid Analysis Main research Investigation and determination of fluid properties and fluid ageing Excellence cluster TMFB (Tailor-Made Fuels from Biomass) Sealing technology Equipment: Surface measuring room, oil laboratory Software: ANSYS, COSMO-RS, FIRST, in-house developed tribosimulation tools 9 of 32
10 Tribology and Fluid Analysis Main research Investigation and determination of fluid properties and fluid ageing Viscosity, acid number, water content, particle content, pourpoint, foaming characteristics Excellence cluster TMFB (Tailor-Made Fuels from Biomass) Sealing technology Prediction of oil ageing based on a mathematical description 10 of 32
11 Tribology and Fluid Analysis Main research Investigation and determination of fluid properties and fluid ageing Investigation of viscosity and lubricity of fuels Excellence cluster TMFB (Tailor-Made Fuels from Biomass) Molecular description of viscosity and lubricity Sealing technology Measurement of temperature- and pressure-dependent viscosity 11 of 32
12 Tribology and Fluid Analysis Main research Investigation and determination of fluid properties and fluid ageing Friction measurement at high velocity Excellence cluster TMFB (Tailor-Made Fuels from Biomass) Sealing technology Immersion tests to determine chemical interactions between fluid and sealing material 12 of 32
13 Pump and Motor Technology Optimization of hydrostatic machines Fundamental investigations using simulation tools Hydrostatic transmission for wind energy application Current fields of research Equipment - Test facilities for component tests of hydraulic pumps - Measurement technology designed for hydraulic applications Software - Ansys, MSC Adams, DSHplus, PumpLinx - In-house developed simulation tools 13 of 32
14 Pump and Motor Technology Optimization of hydrostatic machines CFD-simulation of flow channels of axial piston machines Fundamental investigations using simulation tools Hydrostatic transmission for wind energy application Simulation of the lubricating film focused on pistonbushing contact Current fields of research Druck [bar] Druckverläufe bei n=2000 min-1, Kennfeld: boc0118f Druck HD2 Druck HD1 Zellendruck A ND A HD1 A HD2 V Zelle Druckschwankungsamplitude HD1: 2.15 bar Druckschwankungsamplitude HD2: bar Maximaler Zellendruck: bar Fläche [mm²] Volumen [mm³] Drehwinkel Außenrad [ ] Simulation of the commutation of pumps using DSHplus 14 of 32
15 Pump and Motor Technology Optimization of hydrostatic machines generator 1 Fundamental investigations using simulation tools generator 2 Hydrostatic transmission for wind energy application Current fields of research 15 of 32
16 Pump and Motor Technology Optimization of hydrostatic machines Fundamental investigations using simulation tools Hydrostatic transmission for wind energy application Axial piston pump with coated pistons (Collaborative Research Centre 442) Radax novel design approach for radial piston machines Current fields of research Investigation of churning losses in axial piston machines using CFD 16 of 32
17 System and Control Technology Approach Analysis and optimisation Efficient and compact systems Condition monitoring 17 of 32
18 System and Control Technology Approach Analysis and optimisation Efficient and compact systems Gang gear 1 Gang gear 2 Gang gear 3 Condition monitoring Zugkraft Traction F F Zug trac Traction F trac Velocity v Traction F trac Traction F trac Velocity v G g 1 G g 2 Gang gear 3 Gang gear 4 gear efficiency Velocity v Velocity v 18 of 32
19 System and Control Technology Approach Self energising electro hydraulic brake Analysis and optimisation Efficient and compact systems Condition monitoring Optimisation of controller and design Validation of simulation results on test bench Improvement of hydrostatic transmissions for ocean energy 19 of 32
20 System and Control Technology Approach Analysis and optimisation master display error diagnosis Efficient and compact systems control actuator valve spool drive Condition monitoring other devices measurement data sensors formatting interpretation HMI temperature humidity permittivity conductivity viscosity particle number state definitions rule base training data 20 of 32
21 Valves and Mechatronics Main research Valve development for circuit breaker drives Valves & Mechatronics Short-time ageing test for hydraulic valves Actuation Fluid mechanics Flow resistance Mechanics Electro mechanics Flow forces Equipment - Valve test rig - Ageing test rig Equipment - Ansys CFX, ICEM CFD, Flux 3, DSHplus 21 of 32
22 Valves and Mechatronics Main research Valve development for circuit breaker drives Short-time ageing test for hydraulic valves Valve development Leakage investigation 22 of 32
23 Valves and Mechatronics Main research Valve development for circuit breaker drives Short-time ageing test for hydraulic valves Stirrer Particle reservoir Heat exchanger Membrane pump Filters Main reservoir Valve manifold Flow sensors Main pump Wear dependent flow rate changes 23 of 32
24 Pneumatics Main research Servopneumatic Aachen-IFAS-Hand Analytic determination of pneumatic seal friction Handling devices Equipment - Pneumatic laboratory - Flow measurement test rig - Rapid characterization of pneumatic components 24 of 32
25 Pneumatics Main research Servopneumatic Aachen-IFAS-Hand: Electromagnetic commutation valve Analytic determination of pneumatic seal friction Target application Handling devices Functional principle Prototype testing Magnetic simulation 25 of 32
26 Pneumatics Main research Real system Servopneumatic Aachen-IFAS-Hand Analytic determination of pneumatic seal friction Test rig / Simulation Characteristic diagrams / Correlations Handling devices System simulation Friction law 26 of 32
27 Pneumatics Main research Servopneumatic Aachen-IFAS-Hand S. Gorb, MPI for Metal Research, Stuttgart Analytic determination of pneumatic seal friction Handling devices 27 of 32
28 Non-profit association for the advancement of fluid power technology Englisch Technology transfer (e.g. organization of conferences) Promotion of students (e.g. study trips to companies) Promotion of research (e.g. purchase of equipment) Technical literature 275 members (41 company members) 28 of 32
29 Non-profit association for the advancement of fluid power technology Englisch Technology transfer (e.g. organization of conferences) Promotion of students (e.g. study trips to companies) Promotion of research (e.g. purchase of equipment) Technical literature 275 members (41 company members) 29 of 32
30 Non-profit association for the advancement of fluid power technology Englisch Technology transfer (e.g. organization of conferences) Promotion of students (e.g. study trips to companies) Promotion of research (e.g. purchase of equipment) Technical literature 275 members (41 company members) 30 of 32
31 Non-profit association for the advancement of fluid power technology Englisch Technology transfer (e.g. organization of conferences) Promotion of students (e.g. study trips to companies) Promotion of research (e.g. purchase of equipment) Technical literature 275 members (41 company members) 31 of 32
32 Thank you for your attention. Questions, Suggestions?
Institute for Fluid Power Drives and Controls IFAS of RWTH Aachen University
Innovation in Fluid Power Institute for Fluid Power Drives and Controls IFAS of RWTH Aachen University RWTH Aachen University Facts and Figures Established in 1870 9 faculties, 260 institutes (55 in mech.
More informationSimulation based Power Steering Hose Design and Optimization
Simulation based Power Steering Hose Design and Optimization Dr. Heiko Baum FLUIDON GmbH Jülicher Strasse 336 52070 Aachen COMPETENCE IN FLUID POWER SYSTEMS SIMULATION KOMPETENZ IN DER SIMULATION FLUIDTECHNISCHER
More informationDLR s Free Piston Linear Generator FPLG Development of an Innovative Linear Power Unit
DLR s Free Piston Linear Generator FPLG of an Innovative Linear Power Unit Florian Kock September 8, 2015 www.dlr.de Slide 1 > Kock > FKLG > 2015-09-08 FPLG Project Overview A Decade of Linear Power 2002
More information(7th IFK) 7th International. Kolloquium. Monday, March 22. Tribology and Fluids. Group E: Group F: Group G: Group H: Group I: Fluidtechnisches
Workshop: 24 7th International Fluid Power Conference (7th IFK) 22» March 2010 Aachen, Germany 7, Internationales Fluidtechnisches Kolloquium (7. IFK) 22. - 24 M«rz 2010 Aachen. Germany Volume 2 - Monday,
More informationDesign and Modeling of Fluid Power Systems ME 597/ABE 591
Systems ME 597/ABE 591 Dr. Monika Ivantysynova MAHA Professor Flud Power Systems MAHA Fluid Power Research Center Purdue University Systems Dr. Monika Ivantysynova, Maha Professor Fluid Power Systems Mivantys@purdue.edu
More informationPure vegetable oil for Non-Road Diesel engines
Pure vegetable oil for Non-Road Diesel engines Andreas Hubert Chair of internal combustion engines Conference: The future of pure plant oil as local fuel 26.01.2010 Lyon, France Agenda 1) Presentation
More informationFrom hydrostatic to electric solutions: an efficient and sustainable evolution of heavy duty drive systems
From hydrostatic to electric solutions: an efficient and sustainable evolution of heavy duty drive systems Relatore: Andrea Torcelli Azienda: Bonfiglioli Riduttori SpA Content Bonfiglioli Mobile & Wind
More information(10. IFK) 10th International. Fluid Power Conference. Wednesday, March 9. Volume 2 Conference: Group 1 2: Novel System Structures.
10th International Fluid Power Conference (10. IFK) March 810, 2016 in Dresden Volume 2 Conference: Wednesday, March 9 Group 1 2: Novel System Structures Group 3 5: Pumps Group 4: Group 6: Thermal Behaviour
More informationSimulation of Axial Piston Pumps using MSC.ADAMS
Simulation of Axial Piston Pumps using MSC.ADAMS Dipl.-Ing. Michael Deeken, Project Engineer Institute for Fluid Power Drives and Controls (IFAS) RWTH Aachen University Structure Applications and Function
More informationApplication of proportional seat valves to a Self-energising Electro-Hydraulic Brake
Application of proportional seat valves to a Self-energising Electro-Hydraulic Brake Julian Ewald, Matthias Liermann, Christian Stammen, Hubertus Murrenhoff RWTH Aachen University, Germany Institute for
More informationVariable Valve Drive From the Concept to Series Approval
Variable Valve Drive From the Concept to Series Approval New vehicles are subject to ever more stringent limits in consumption cycles and emissions. At the same time, requirements in terms of engine performance,
More informationPodium Engineering complete race cars, vehicle prototypes high performance hybrid/electric powertrain
Born in the firm belief that design quality, high project commitment and absolute respect of deadlines are key competitive factors for a consulting and engineering company, Podium Engineering is a dynamic
More informationPVRC Capabilities & Current Research
Department of Mechanical Engineering Powertrain & Vehicle Research Centre PVRC Capabilities & Current Research University of Bath 2 University of Bath South West England Primarily Engineering and Science
More informationIts Faculties. from which numerous degree programs in these fields of study are offered.
1 Architecture Civil Engineering Mechanical Engineering and Economics Electrical Engineering and Information Technology (Technical) Mathematics and (Technical) Physics (Technical) Chemistry, Process Engineering
More informationCollaborazioni efficaci fra eccellenze universitarie e PMI per accelerare gli sviluppi dei prodotti
Collaborazioni efficaci fra eccellenze universitarie e PMI per accelerare gli sviluppi dei prodotti To r i n o, 2 8 S e p t e m b e r, 2 0 1 7 Massimo Rundo Politecnico di Torino Dipartimento Energia Galileo
More informationProgramme area 4a. Fluid Energy Machines
Programme area 4a Fluid Energy 136 Contents: Fundamentals of Fluid Mechanics 138 Thermodynamics 140 Mechanics / Other 142 Power Engines Hydroturbines Pelton...143 Francis...144 others...145 Steam Turbines...146
More informationANALYSING LOSSES IN HYDROSTATIC DRIVES
OS4-1 Proceedings of the 7th JFPS International Symposium on Fluid Power, TOYAMA 2008 September 15-18, 2008 ANALYSING LOSSES IN HYDROSTATIC DRIVES Hubertus MURRENHOFF*, Ulf PIEPENSTOCK* and Torsten KOHMÄSCHER*
More informationTHE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting
THE FKFS 0D/1D-SIMULATION Concepts studies, engineering services and consulting r e s e a r c h i n m o t i o n. VEHICLE IN MOTION On the basis of constant engine speeds and loads, the combustion engine
More informationElectrical Drives Research at LUT. Gråsten
Electrical Drives Research at LUT Gråsten 28.8.2018 About myself Master of science in Electrical Engineering at LUT 1990 - Scholarship student at RWTH Aachen 1988-1989 - Diploma thesis Unterschuhung von
More informationMagnetorheological suspension damper for space application
Magnetorheological suspension damper for space application Ing. Michal Kubík Supervisors Doc. Ing. Ivan Mazůrek, CSc. Ing. Jakub Roupec, Ph.D. Institute of Machine and Industrial Design Faculty of Mechanical
More informationAdvancements in PAR modelling: Major results of a national project performed at RWTH Aachen and JÜLICH
Advancements in PAR modelling: Major results of a national project performed at RWTH Aachen and JÜLICH B. SIMON 1, E.-A. REINECKE 2, U. SCHWARZ 1, K. TROLLMANN 2, T. ZGAVC 2, H.-J. ALLELEIN 1,2 1 2 Status
More informationPower Electronics and Drives (PED)
Power Electronics and Drives (PED) Introduction Spurred on by technological progress and a steadily increasing concern about the efficient use of depleting energy resources, static power electronic converters
More information3 rd European Hyperworks Technology Conference. Application of Results from CFD-Simulations on a Race Car
3 rd European Hyperworks Technology Conference Application of Results from CFD-Simulations on a Race Car Ludwigsburg, November 3 rd 2009 Dipl.-Ing. René Henn, Dipl.-Ing. Leif Ickert Institut für Kraftfahrzeuge
More informationMotor Vehicle Engineering
Motor Vehicle Engineering 25 It deals with the design and maintenance of a motor vehicle and its accessories. The main courses in this stream are: IC Engine & Reciprocating Machine Motor Vehicle Engineering
More informationMARITIME AFTERNOON. Torben Ole Andersen. June 14, 2017 Aalborg University, Denmark
MARITIME AFTERNOON HYDRAULICS Torben Ole Andersen June 14, 2017 Aalborg University, Denmark Agenda Marine Propellers Digital Hydraulics in a Hydraulic Winch Secondary Control in of Multi -Chamber Cylinders
More informationInnovation Days Efficient Dynamics. Energy and Environmental Test Centre.
Innovation Days Efficient Dynamics. Energy and Environmental Test Centre. Workshop: Environmental Wind Tunnel. Environmental Wind Tunnel. Environmental Wind Tunnel. Environmental Wind Tunnel. Environmental
More informationServo-pneumatic drive solution for welding guns. Top quality welding!
Servo-pneumatic drive solution for welding guns Sturdy and precise! Top quality welding! Highlights Extremely short cycle times High quality and outstanding reproducibility of the spot welds Excellent
More informationESTECO DESIGN COMPETITION 2018 RULES AND REGULATIONS
ESTECO DESIGN COMPETITION 2018 RULES AND REGULATIONS ESTECO S.p.A. and Cummins Inc. are proud to announce the launch of the ESTECO Academy 2018 Design Challenge dedicated to Engineering Students around
More information4-Day Power System Analysis, Coordination, System Studies
4-Day Power System Analysis, Coordination, System Studies Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq Our
More informationAdvance Your Company s Success in Technology Development & Commercialization PARTNER WITH ARGONNE NATIONAL LABORATORY
Advance Your Company s Success in Technology Development & Commercialization PARTNER WITH ARGONNE NATIONAL LABORATORY Leverage Argonne s expertise, technologies, and research facilities to improve your
More informationAutomotive Research Centre Niedersachsen Niedersächsisches Forschungszentrum Fahrzeugtechnik. Braunschweig, November 2015
Automotive Research Centre Niedersachsen Niedersächsisches Forschungszentrum Fahrzeugtechnik Braunschweig, November 2015 The Location Concept of the NFF November 2015 NFF presentation Page 2 Welcome to
More informationFINAL REPORT For Japan-Korea Joint Research Project
FINAL REPORT For Japan-Korea Joint Research Project AREA 1. Mathematics & Physics 2. Chemistry & Material Science 3. Biology 4. Informatics & Mechatronics 5. Geo-Science & Space Science 6. Medical Science
More informationÜbersicht der VVT-Systementwicklung bei Hilite. Overview of VVT System development at Hilite
Übersicht der VVT-Systementwicklung bei Hilite Overview of VVT System development at Hilite M.Sc. Mustafa Mohammed Simulation Engineer Business Unit Engine / Simulation Frei verwendbar Contents Company
More informationOptimal design of a double coil magnetorheological fluid damper with various piston profiles
11 th World Congress on Structural and Multidisciplinary Optimisation 07 th -12 th, June 2015, Sydney Australia Optimal design of a double coil magnetorheological fluid damper with various piston profiles
More informationFACULTY PROFILE. Degree Branch / Specialization College University
FACULTY PROFILE Name Designation Email ID : S.Benjamin Franklin : Assistant Professor (Sr.Gr) : benjaminfranklin.me@srit.com Area of Specialization Total Experience : Thermal Engineering : Academic : 7
More informationAGRIBUSINESS (AGB) AGB Courses. Agribusiness (AGB) 1
Agribusiness (AGB) 1 AGRIBUSINESS (AGB) AGB Courses AGB 101. Introduction to Agribusiness. 4 units Prerequisite: AGB major and freshman standing. Orientation to the agribusiness sector of agriculture.
More informationFundamentals of Engineering High-Performance Actuator Systems. Kenneth W. Hummel
Fundamentals of Engineering High-Performance Actuator Systems Kenneth W. Hummel Author Name Chapter 1: Introduction...1 1.1 Fundamentals... 2 1.2 Performance... 2 1.3 Loads... 3 1.4 Constraints... 3 1.5
More informationDrive Systems for Protective Machine Doors Tried and proven
Drive Systems for Protective Machine Doors Tried and proven SERVAX Always in motion Swiss Quality for Demanding Customers. Our industrial products are in use all over the world. The formula for success
More informationSimulation of dynamic torque ripple in an auxiliary power unit for a range extended electric vehicle
The Low Cost Auxiliary Power Unit Project (LowCAP) Simulation of dynamic torque ripple in an auxiliary power unit for a range extended electric vehicle Dian Liu, Sam Akehurst, Christian J Brace University
More informationTechnical Paper. Technology to meet the highest standards. Reliable safety brakes for future-orientated RoboDrive motors FA.6.78.
Technical Paper FA.6.78.EN Technology to meet the highest standards Reliable safety brakes for future-orientated RoboDrive motors Drives in the robotics sector require a maximum of dynamics and precision,
More informationChangchun, China. 1 State Key Laboratory of Automotive Simulation and Control, Jilin University, 5988 Renmin Street
Applied Mechanics and Materials Online: 2014-05-23 ISSN: 1662-7482, Vols. 556-562, pp 1441-1445 doi:10.4028/www.scientific.net/amm.556-562.1441 2014 Trans Tech Publications, Switzerland The Design of an
More informationIndustrial Lubrication. p. 93 to 97
ff p. 93 to 97 Advanced Can be organized for a single company Lubrication & Technology of Industrial Equipment 5 Days Reference LUB / LUBEI-E LUB / LUBEI Purpose To provide the necessary technical information
More informationPropeller Blade Bearings for Aircraft Open Rotor Engine
NTN TECHNICAL REVIEW No.84(2016) [ New Product ] Guillaume LEFORT* The Propeller Blade Bearings for Open Rotor Engine SAGE2 were developed by NTN-SNR in the frame of the Clean Sky aerospace programme.
More informationCerobear - The Company
Cerobear - The Company Committed to the abbreviation CEramic in ROlling BEARings, CEROBEAR GmbH is the renowned world leader in the design, manufacturing and marketing of bearings that feature highly advanced
More informationHydraulic Power Packs
l Hydraulic Power Packs 800 bar Hydraulic Power Packs IQ VAX 2-Z Our robust and durable power packs are 100 per cent optimised for the demands of windpower and have proven themselves in hard continuous
More informationINTERNATIONAL SUMMER SCHOOL PEM FUEL CELLS ACCREDITED. according to the. European Credit Transfer System (ECTS) July 2012 Nevsehir, Turkey
INTERNATIONAL SUMMER SCHOOL ON PEM FUEL CELLS ACCREDITED according to the European Credit Transfer System (ECTS) 16 20 July 2012 Nevsehir, Turkey ORGANISATION AND SCOPE The Accredited International Summer
More informationO B J E C T I V E NON-kind-Projects
OBJECTIVE The Large Engines Competence Center (LEC) is an industrial competence center within the framework of the Austrian competence center program of the Federal Ministry of Economics and Labour. The
More informationThe Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year.
Graduate Diploma in Engineering (GDipE) 2015 These Program Rules should be read in conjunction with the University's policies (http://www.adelaide.edu.au/policies). Overview Graduate Diploma in Engineering
More informationAdams-EDEM Co-simulation for Predicting Military Vehicle Mobility on Soft Soil
Adams-EDEM Co-simulation for Predicting Military Vehicle Mobility on Soft Soil By Brian Edwards, Vehicle Dynamics Group, Pratt and Miller Engineering, USA 22 Engineering Reality Magazine Multibody Dynamics
More informationTable of Contents. 95 IMS 25 flexible manufacturing line with 5 stations. 104 IMS 26 flexible manufacturing line with 6 stations
Table of Contents Table of Contents Automation Technology IMS Industrial mechatronics system Mechatronics Sub-Systems with UniTrain-I IMS 1.2: DC transport system IMS 1.3: AC transport system IMS 3 Sorting
More informationIndustrial Mechanic (Millwright) Level 3
Industrial Mechanic (Millwright) Level 3 Rev. September 2005 Industrial Mechanic (Millwright) Unit: G5 Prime Movers I Diesel 1 Level: Duration: Three 60 hours Theory: 20 hours Practical: 40 hours Overview:
More informationRHOMBUS BRIQUETTING MECHANISM MODELLING
RHOMBUS BRIQUETTING MECHANISM MODELLING Edgars Repsa, Eriks Kronbergs Institute of Mechanics, Faculty of Engineering, Latvia University of Agriculture edgars.repsa@llu.lv, eriks.kronbergs@llu.lv Abstract.
More informationGas Turbines and Aerospace Propulsion
Gas Turbines and Aerospace Propulsion 1 Technische Universität Darmstadt Department of Mechanical Engineering 2 Institutes 29 professors 27 institutes 3650 students 250 M.Sc. leaving each year 475 researchers
More informationTest rig for rod seals contact pressure measurement
Tribology and Design 107 Test rig for rod seals contact pressure measurement G. Belforte 1, M. Conte 2, L. Mazza 1, T. Raparelli 1 & C. Visconte 1 1 Department of Mechanics, Politecnico di Torino, Italy
More informationThe Aachen Approach on E-Mobility
The Aachen Approach on E-Mobility Jan Ole Hansen Sao Paulo, October 2017 Production Engineering at RWTH Aachen University Founded in 1870 One of only 11 Elite Universities Highest third-party funds in
More informationAcademic Course Description
BME 503 FLUID POWER SYSTEMS Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME 503 FLUID POWER SYSTEMS Fifth Semester, 2015-16
More informationEngineering Diploma Resource Guide ST280 ETP Hydraulics (Engineering)
Engineering Diploma Resource Guide ST80 ETP Hydraulics (Engineering) Introduction Hydraulic systems are a fundamental aspect of engineering. Utilised across a variety of sectors including aviation, construction,
More informationA Hydraulic Cylinder with Variable Power Configuration: Design and Validation of the Fluid-Dynamic Model
A Hydraulic Cylinder with Variable Power Configuration: Design and Validation of the Fluid-Dynamic Model C. Abagnale and M. Cardone Abstract The paper describes the study of a hydraulic actuation system,
More informationHighly dynamic control of a test bench for highspeed train pantographs
PAGE 26 CUSTOMERS Highly dynamic control of a test bench for highspeed train pantographs Keeping Contact at 300 km/h Electric rail vehicles must never lose contact with the power supply, not even at the
More informationSemester master's program «Railway electro supply in Russia»
Semester master's program «Railway electro supply in Russia» Semester program Railway electro supply in Russia is prepared by the chair "Power of railway transport" of Omsk State Transport University.
More informationEddy current sensors eddyncdt
Eddy current sensors eddyncdt Measuring principle - A magnetic field is generated while energising the coil with alternating current - If there is a magnetically conductive material within the magnetic
More informationWorkforce Development Learning Center Course Outline. Emergency Vehicle Driving FIP 3601
Revision Date: Workforce Development Learning Center Course Outline Course Title: A maximum of 30 values Course Number: State-assigned number Course Objectives: List the primary learning objectives Emergency
More informationProject No.1. of the National Research Programme «LATENERGI»
Project No.1. of the National Research Programme «LATENERGI» «Innovative power electronic technologies for increasing energy efficiency of industrial and household sectors in Latvia, future power supply
More informationThermal Analysis and Optimization of Gearboxes by Simulation
TECHNICAL Thermal Analysis and Optimization of Gearboxes by Simulation Björn Bauer, Ralf Hambrecht, Andreas Kube and Simon Becka Introduction With the increasing mechanical power capacity of gearboxes,
More informationOPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018
OPTIMIZATION STUDIES OF ENGINE FRICTION EUROPEAN GT CONFERENCE FRANKFURT/MAIN, OCTOBER 8TH, 2018 M.Sc. Oleg Krecker, PhD candidate, BMW B.Eng. Christoph Hiltner, Master s student, Affiliation BMW AGENDA
More informationHERCULES-2 Project. Deliverable: D8.8
HERCULES-2 Project Fuel Flexible, Near Zero Emissions, Adaptive Performance Marine Engine Deliverable: D8.8 Study an alternative urea decomposition and mixer / SCR configuration and / or study in extended
More informationImpacts of Short Tube Orifice Flow and Geometrical Parameters on Flow Discharge Coefficient Characteristics
Impacts of Short Tube Orifice Flow and Geometrical Parameters on Flow Discharge Coefficient Characteristics M. Metwally Lecturer, Ph.D., MTC, Cairo, Egypt Abstract Modern offset printing machine, paper
More informationCORE. Chris Such, Ricardo
CORE CO 2 REduction for long distance transport Chris Such, Ricardo On behalf of CORE Project Coordinator Johan Engstrom, Volvo CORE Vision CO2RE focus is on highly efficient drivelines for long distance
More informationActive Isolation System AIS
Active Isolation System AIS Active electronic-pneumatic vibration insulation system with powerful real-time control for the highest demands on effective insulation, deflection and constant level. n Active
More informationVALVOLE. Choke Valves Gate Valves WellHead Control Panels Control Systems Oil & Gas Upstream Equipment CELEBRATING
VALVOLE Choke Valves Gate Valves WellHead Control Panels Control Systems Oil & Gas Upstream Equipment CELEBRATING Your best solution for Oil & Gas Upstream Equipment Quam is a CUSTOMER-ORIENTED company
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) The UFPT is a modular, smart and unique fluid power and motion control training unit. It contains an excellent integration of industrial-graded hardware and builtin
More informationTheoretical and Experimental Investigation of Compression Loads in Twin Screw Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2004 Theoretical and Experimental Investigation of Compression Loads in Twin Screw Compressor
More informationIMIEV3 Service and repair non-live electric and hybrid vehicle systems
Service and repair non-live electric and hybrid vehicle systems Overview This unit covers the competence and knowledge technicians need to carry out servicing and general repairs on non-live high energy
More informationCombustion Engines: Reduction Of Friction And Wear (I Mech E Conference Publications ) READ ONLINE
Combustion Engines: Reduction Of Friction And Wear (I Mech E Conference Publications 1985-3) READ ONLINE If searching for the book Combustion Engines: Reduction of Friction and Wear (I Mech E Conference
More informationAxial Isolation. & Axial Control Valves. Flow Control Division
Axial Isolation & Axial Control Valves Flow Control Division A pedigree of excellence Goodwin International is a world leader in the design, manufacture and supply of check valves for the hydrocarbon,
More informationPowerTech converter family for industry and energy
PowerTech converter family for industry and energy CONVERTERS FOR MAXIMUM PERFORMANCE Energy generation and storage Power supply and grid compensation Test rig applications Research applications Demanding
More informationFRAUNHOFER INSTITUTE FOR CHEMICAL TECHNOLOGY ICT REDOX-FLOW BATTERY
FRAUNHOFER INSTITUTE FOR CHEMICAL TECHNOLOGY ICT REDOX-FLOW BATTERY REDOX-FLOW BATTERY REDOX-FLOW BATTERY Redox-flow batteries are efficient and have a longer service life than conventional batteries.
More informationUTILIZATION OF PNEUMATIC ACTUATOR
UTILIZATION OF PNEUMATIC ACTUATOR Rupesh Parkhi 1 UG Student, Department of Mech, G.H.Raisoni College of Engineering, Nagpur, RTMN University ABSTRACT The pneumatic actuator represents the main force control
More informationUjwal D. Patil M & M, Kandivali Mumbai
Cylinder Head Intake Port Design & In-Cylinder Air-flow Patterns, Streamlines formations, Swirl Generation Analysis to Evaluate Performance & Emissions Abstract On the verge of rapidly increasing threat
More informationDESIGN AND FUEL ECONOMY OF A SERIES HYDRAULIC HYBRID VEHICLE
OS1-1 Proceedings of the 7th JFPS International Symposium on Fluid Power, TOYAMA 2008 September 15-18, 2008 DESIGN AND FUEL ECONOMY OF A SERIES HYDRAULIC HYBRID VEHICLE Peter ACHTEN*, Georges VAEL*, Mohamed
More informationFuture Trends for Power Systems
Future Trends for Power Systems A Short Course to Honour Professor David Hill Centre of Excellence in Power Engineering & Australian Power Institute 12 October 2009 Future Trends for Power Systems Happy
More informationTest Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
More informationAutomotive. Automotive Body and Repair
Automotive Body and Repair This program is designed to prepare the student for employment as a body repair and paint apprentice in privately owned repair shops or automotive dealerships. A student could
More informationBall-on-Three Disks Test Machine
Ball-on-Three Disks Test Machine Suitable for testing: A test method using this test configuration is currently under review within the Diesel Fuel Subcommittee of ASTM Committee D2 on Petroleum Products
More informationModeling and Optimization of a Linear Electromagnetic Piston Pump
Fluid Power Innovation & Research Conference Minneapolis, MN October 10 12, 2016 ing and Optimization of a Linear Electromagnetic Piston Pump Paul Hogan, MS Student Mechanical Engineering, University of
More informationElectric Power and Energy Systems Engineering Program An Overview. February 10, 2015
Electric Power and Energy Systems Engineering Program An Overview February 10, 2015 ASU Electric Power and Energy Systems Program ASU has the one of the largest electric power and energy systems programs
More informationWELCOME to the FLOX-COAL II Workshop
Institute of Combustion and Power Plant Technology Prof. Dr. techn. G. Scheffknecht WELCOME to the FLOX-COAL II Workshop Institute of Combustion and Power Plant Technology Prof. Dr. techn. G. Scheffknecht
More informationSpecifications and schedule of a fuel cell test railway vehicle. T. Yoneyama, K. Ogawa, T. Furuya, K. Kondo, T. Yamamoto
Specifications and schedule of a fuel cell test railway vehicle T. Yoneyama, K. Ogawa, T. Furuya, K. Kondo, T. Yamamoto Railway Technical Research Institute, Tokyo Japan. 1. Abstract This paper describes
More informationFilter and Particle Simulation for Hydraulic Systems
1 Filter and Particle Simulation for Hydraulic Systems Karl Wartlick Argo-Hytos GmbH, Kraichtal-Menzingen, Germany René von Dombrowski RWTH Aachen University, Germany, Institute for Fluid Power Drives
More informationSteering Test Rigs. The World of Steering Test Machines. A world of experience TEST AND MOTION SIMULATION 2
Steering Test Rigs The World of Steering Test Machines Steering column assemblies, are by their nature extremely safety critical, thus the ability to test them accurately and repeatedly is extremely important.
More informationReduction of System Inherent Pressure Losses at Pressure Compensators of Hydraulic Load Sensing Systems
Group E - Mobile Hydraulics Paper E-4 253 Reduction of System Inherent Pressure Losses at Pressure Compensators of Hydraulic Load Sensing Systems Dipl.-Ing. Jan Siebert Chair of Mobile Machines (Mobima),
More informationCURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) GANPAT UNIVERSITY
ANNEXURE - A CURRICULUM BOSCH-REXROTH (CENTRE OF EXCELLENCE) Host Institute: GANPAT UNIVERSITY Contents of Basic Industrial Pneumatics -----------------------------------------------------------------------------------------------------------------
More informationLecture (1) on. Basics of Hydraulic Control. By Dr. Emad M. Saad Industrial Engineering Dept. Faculty of Engineering Fayoum University
1 Lecture (1) on Basics of Hydraulic Control Tanta University By Dr. Emad M. Saad Industrial Engineering Dept. Faculty of Engineering Fayoum University Faculty of Engineering Mechanical power Engineering
More information600 A CURRENT LEADS WITH DRY AND COMPACT WARM TERMINALS
EUROPEAN ORGANIZATION FOR NUCLEAR RESEARCH European Laboratory for Particle Physics Large Hadron Collider Project LHC Project Report 605 600 A CURRENT LEADS WITH DRY AND COMPACT WARM TERMINALS T.P. Andersen
More informationstudents (mostly MS level, partially BS and PhD) academic staff
The (established 1707) and the Mechanical Engineering Faculty of the CTU 8 faculties - Civil Eng, MechEng, ElEng, Informatics, NucEng, TranspEng, BioMedEng and Architecture/Styling 21 000 students (mostly
More informationCRYOGENIC COOLING SYSTEMS Dr. Hezlin Ashraf-Ball Chief Project Engineer
CRYOGENIC COOLING SYSTEMS Dr. Hezlin Ashraf-Ball Chief Project Engineer 19 th may 2015 32 nd HEXAG Meeting Newcastle University www.oswald.co.uk 02475 25 6070 Oswald Consultancy Ltd 2 Oswald Bespoke Heat
More informationObjectives / Expected Results
Objectives / Expected Results WP Leader: Dr. M. Moser, T. Moeller Cut operating, maintenance and deployment costs Develop systems, methods an processes for improved engine lifetime performance Reduction
More informationDC Arc-Free Circuit Breaker for Utility-Grid Battery Storage System
DC Arc-Free Circuit Breaker for Utility-Grid Battery Storage System Public Project Report Project RENE-005 University of Toronto 10 King s College Rd. Toronto, ON 2016 Shunt Current Mes. IGBTs MOV Short
More informationmaintenance of the winch. All information in this publication is based on the latest production information available at the time of printing.
Compact Winch Thank you for purchasing a Winch. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available at
More information