Full RELUX photometric data and BIM files available to download from the relevant product page on the Gamma Illumination website

Transcription

1 Datasheet

2 DESCRIPTION AFD is a range of contemporary suspended linear profile luminaires with direct and indirect illumination. Manufactured from responsibly sourced pure extruded aluminium with a durable polyester powder coated finish, it is powered by a highly efficient Tridonic LED and driver system, providing ECA compliant variants with efficacies up to llm/tcw. It features an homogeneous opal polycarbonate diffuser for general and decorative illumination, whilst the low glare prismatic diffuser is ideal for LG7 and BS-EN :2011 compliant schemes. It is available in four lengths with low, medium and high outputs, along with dimming and integral emergency options. SPECIFICATIONS 852 mm 1271 mm 1550 mm 2528 mm Nominal weight (850 mm) Nominal weight (1.2 m) Nominal weight (1.5 m) Nominal weight (2.5 m) Mains voltage 3.5 kg 5.5 kg 6.5 kg 12.3 kg V AC 109 mm Mains frequency Ingress protection Hz IP20 62 mm Mains connection Operating ambient temperature Colour consistency - MacAdam Ellipse Warranty Piano type terminal block -25 C to +35 C 3 SDCM 5 years Colour rendering R a 80 Typical power factor 0.9 Full RELUX photometric data and BIM files available to download from the relevant product page on the Gamma Illumination website for illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS /08/ of 7

3 PERFORMANCE DATA - OPAL DIFFUSER 850 mm LENGTH Total Output Power / AFD001/LO / AFD / AFD001/HO / AFD002/LO / AFD / AFD002/HO 1.2 m LENGTH Total Output Power / AFD003/LO / AFD / AFD003/HO / AFD004/LO / AFD / AFD004/HO 1.5 m LENGTH Total Output Power / AFD005/LO / AFD / AFD005/HO / AFD006/LO / AFD / AFD006/HO 2.5 m LENGTH Total Output Power / AFD007/LO / AFD / AFD007/HO / AFD008/LO / AFD / AFD008/HO Full RELUX photometric data and BIM files available to download from the relevant product page on the Gamma Illumination website for illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS /08/ of 7

4 PERFORMANCE DATA - LOW GLARE DIFFUSER 850 mm LENGTH Total Output / AFD001/LO/LG / AFD001/LG / AFD001/HO/LG / AFD002/LO/LG / AFD002/LG / AFD002/HO/LG 1.2 m LENGTH Total Output / AFD003/LO/LG / AFD003/LG / AFD003/HO/LG / AFD004/LO/LG / AFD004/LG / AFD004/HO/LG 1.5 m LENGTH Total Output / AFD005/LO/LG / AFD005/LG / AFD005/HO/LG / AFD006/LO/LG / AFD006/LG / AFD006/HO/LG 2.5 m LENGTH Total Output / AFD007/LO/LG / AFD007/LG / AFD007/HO/LG / AFD008/LO/LG / AFD008/LG / AFD008/HO/LG Full RELUX photometric data and BIM files available to download from the relevant product page on the Gamma Illumination website for illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS /08/ of 7

5 LIFE 25 C ambient temperature L90 / F10 L80 / F10 L70 / F10 AFD001/LO - AFD008/LO 37,000 h >60,000 h >60,000 h AFD001 - AFD008 36,000 h >60,000 h >60,000 h AFD001/HO - AFD008/HO 23,000 h 44,000 h >60,000 h AFD001/LO/LG - AFD008/LO/LG 37,000 h >60,000 h >60,000 h AFD001/LG - AFD008/LG 37,000 h >60,000 h >60,000 h AFD001/HO/LG - AFD008/HO/LG 30,000 h 58,000 h >60,000 h L VALUE = % of initial lumens maintained after specified time F VALUE = % of fittings failing to meet operational expectations after specified time EXAMPLE - 60,000 hours L80 / F10 L80 = 80% of initial lumens maintained after 60,000 hours F10 = 10% of fittings will have maintained less than 80% of initial lumens after 60,000 hours OR 90% of fittings will have maintained at least 80% of initial lumens after 60,000 hours Full RELUX photometric data and BIM files available to download from the relevant product page on the Gamma Illumination website for illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS /08/ of 7

6 AFD OPTIONS AND ACCESSORIES SwitchDIM DSI /WH White /BK Black /LG Low glare diffuser /ECO SwitchDIM, DALI or DSI BU.164/180 In-line joining kit BU.164/90 90 joining kit Direct Direct surface mounted / pendant also available See AFC datasheet PT001 Diffuser removal tool End cap colour Specify any RAL finish Reduced / Specific outputs Customised lumen outputs for specific project requirements Plug and socket systems To your specification /EMI EM conversion with integral indicator (not available with 850 mm luminaires) PRODUCT VARIATIONS Body colour Specify any RAL finish Alternative suspension Please contact Sales VARIATION Bespoke engraving Available on body and end caps Product variations Other specifications available on request for illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS /08/ of 7

7 FURTHER INFORMATION SwitchDIM Declaration of Conformity Download at Photometric data Download at BIM files Download at Thornhill Road Business Park Tenter Fields, Dewsbury West Yorkshire WF12 9QT FS for illustrative purposes. Tolerance range of optical and electrical data is +/-10%. We reserve the right to amend or change details without prior notification. E&OE. GDS /08/ of 7