Sturdy steel sheet frame, rubber-mounted engine. Output (as per ISO 9249) Max. torque. Max. inclined position (engine no longer supplied with oil):

Size: px
Start display at page:

Download "Sturdy steel sheet frame, rubber-mounted engine. Output (as per ISO 9249) Max. torque. Max. inclined position (engine no longer supplied with oil):"

Transcription

1 Specifications 6 Specifications 6.1 Models and trade names: overview Wheel loader model Trade name WL WL Frame 6.3 Engine Sturdy steel sheet frame, rubber-mounted engine Engine Wheel loader models / Product Type Design Deutz diesel engine D 2011 L04 W In line No. of cylinders 4 Displacement 3620 cm³ (221.2 cu. in.) Bore and stroke 96 x 125 mm (3.78 x 4.92 ) Compression ratio 1:19 Output (as per ISO 9249) Max. torque 45 kw (61 hp) at 2300 rpm 210 Nm (155 ft. lbs.) at 1700 rpm Minimum idling speed 900 rpm Specific minimum fuel consumption Fuel injection system 220 g/kwh (7.74 oz/kwh) Direct fuel injection Firing order Starting aid Max. inclined position (engine no longer supplied with oil): Oil pressure Exhaust emissions according to EC standard Glow plug 30 in all directions Observe the tilting limit of the machine! (20 laterally) bar (43 64 psi) at 2300 rpm 2004/26 EC BA 34603_04 US Edition 2.1 * 34603_04b610.fm 6-1

2 6.4 Power train Variable displacement pump Variable displacement pump Design Displacement 20 kph (12.4 mph) Displacement 30 kph (18.6 mph) option Max. operating pressure Starting engine speed Droop Wheel loader models / Automotive, infinitely variable hydrostatic axial-piston gearbox 0 45 cm³/rev ( cu. in./rev) 0 56 cm³/rev ( cu. in./rev) 340 bar (4859 psi) rpm at 50 bar (715 psi) HP 2150 ±50 rpm at 250 bar (3573 psi) HP Boost pump Boost pump Wheel loader models / Design Internal gear pump Displacement 11.6 cm³/rev (0.71 cu. in./rev) Charging/boost pressure 30 bar (429 psi) at 1500 rpm Control Speed-sensitive, hydraulic displacement adjustment with pressure cutoff Traveling direction Electrohydraulic control Inching Inching valve Variable displacement motor Wheel loader models / Design Capacity Travel speed forward and reverse 20 kph ( mph) 30 kph ( mph) (option) Axial piston motor (swash plate design) cm³/rev ( cu. in./rev) 1st speed range: 0 6 kph (0 3.7 mph), 2nd speed range: 0 20 kph ( mph), cm³/rev ( cu. in./rev) 1st speed range: 0 7 kph (0 4.3 mph), 2nd speed range: 0 30 kph ( mph), Pushing power 34.5 kn (25,427 ft. lbs.) 39.0 kn (28,743 ft. lbs.) 6-2 BA 34603_04 US Edition 2.1 * 34603_04b610.fm

3 6.5 Axles Front axle Wheel loader models / Design Planetary steering and drive axle, rigid screw connection with frame Differential lock Self-locking differential 45 % King-pin inclination 0 Camber 0 Steering angle 40 Toe-in 0 mm 0 mm (0 in) Track width 1400 mm (55.12 in) Rear axle Wheel loader models / Design Oscillating planetary steering and drive axle Differential lock Self-locking differential 45 % King-pin inclination 0 Camber 0 Total oscillation angle 1 +/- 11 Steering angle 40 Toe-in 0 mm 0 mm (0 in) Track width 1400 mm (55.12 in) 1. Model with tires Model with tires BA 34603_04 US Edition 2.1 * 34603_04b610.fm 6-3

4 6.6 Brakes Service brake Service brake Wheel loader models / Design Foot-operated hydraulic disc brake Location Front axle input Effect On both axles via cardan shaft Brake fluid - see chapter 5 Fluids and lubricants on page 5-37 Parking brake Wheel loader models / Design Manual mechanical disc brake Location Front axle input 6.7 Steering system Description Design Steering mode Assemblies Max. pressure of hydraulic lines Hydraulic pump (gear pump) Wheel loader Wheel loader model model Hydrostatic 4 wheel steering with emergency steering features 4 wheel steering Hydraulic pump, steering unit with priority valve, steering cylinders with automatic synchronisation in left and right final positions bar ( psi) Displacement 22.5 cm³/rev (1.37 cu. in./rev) Maximum steering angle ±40 Displacement 32 cm³/rev (1.96 cu. in./rev) 6-4 BA 34603_04 US Edition 2.1 * 34603_04b610.fm

5 6.8 Work hydraulics Hydraulic pump, control valve, lift and tilt cylinders Description Wheel loader model Wheel loader model Hydraulic pump Displacement Control valve Control lever (joystick) 3rd control circuit control lever Tip switch in control lever (joystick) 3rd control circuit (option) Max. service pressure Secondary protection of tilt cylinder Secondary protection of lift cylinder Filter 22.5 cm³/rev (1.37 cu. in./rev) 50 l/min (13.21 gal/min) at 2300 rpm Gear pump 3 sections (control circuits) 32 cm³/rev (1.96 cu. in./rev) 71 l/min (18.76 gal/min) at 2300 rpm Four-way lever control of lift and tilt cylinders with mechanical lock against unintentional actuation, with electrical control for traveling direction and neutral position Operation quickhitch or hydraulic attachments with mechanical lock against unintentional actuation Operation quickhitch or attachments with hydraulic functions with lock against unintentional actuation, electrical with switch in switch panel 210 bar (3000 psi) Rod side 240 bar (3430 psi) Base side 120 bar (1715 psi) Base side 300 bar (4287 psi) Suction return filter BA 34603_04 US Edition 2.1 * 34603_04b610.fm 6-5

6 6.9 Electrical system Electric units Electrical system Alternator Starter Battery 14 V/95 A 12 V/2.3 kw 12 V/72 Ah Fuse box F7 F6 F5 F4 F3 F2 F1 F16 F15 F14 F13 F12 F11 F10 F9 F8 Fig. 161: Fuse box No. Rated current Protected circuit F1 7.5 High beam (left) F2 7.5 High beam (right) F3 5 Left side marker and rear lights, front socket F4 5 F5 7.5 F6 25 F7 25 All lights F8 7.5 Low beam (left) F9 7.5 Low beam (right) F10 5 F11 15 Switch assignment: front/rear working lights, front attachments (option), rotating beacon (option) Switch lights: lights, heating S5, load stabilizer S8, 3rd control circuit, right side marker and rear lights, front socket (option) High current relay preheating and starting, high current relay, interior light, relays minus compensation, preheating indicator light, hazard warning light 12V power outlet, rotating beacon (option), front/rear working light Switching relay front attachment (option), instrument panel, cutoff solenoid, sensor (coolant level indication) Washer pump, rear wiper, relays wiper, front wiper, horn F Solenoid valve 1st/2nd speed range, load stabilizer F Relays forward/reverse, solenoid valve forward/reverse, backup warning system F14 20 Front attachment (option), heating fan F F16 5 Radio (option) Relay turn indicators, brake lights, solenoid valve (exhaust gas recirculation) 6-6 BA 34603_04 US Edition 2.1 * 34603_04b610.fm

7 Main fuse box with relays F18 The main fuse box with the power relays and the preheating time control unit is located in the engine compartment on the left underneath the battery. F17 F19 K5 K7 K29 Fuse no. Rated current (A) Protected circuit F17 80 A Main fuse (machine) F18 40 A Preheating (air-intake preheating) F19 10 A Minus compensation Fig. 162: Main fuse box Relay no. K5 K7 K29 Protected circuit Preheating: power relay Start: starter relay Minus compensation Switching relays The switching relays are located underneath the switch panel on the right in the side console. (accessed via the maintenance flap on the right on the outside of the cab) K10 Switching relay no. K1 Protected circuit High current relay K3 K4 K3 K4 K10 K16 Reverse driving switching relay Forward driving switching relay Switching relay turn indicators Switching relay front socket (option) K16 K23 Wiper switching relay K23 K1 Fig. 163: Relays BA 34603_04 US Edition 2.1 * 34603_04b610.fm 6-7

8 6.10 Tires Tires for wheel loader model Tire size Tire pressure 1 Front Rear Wheel rim Wheel rims Wheel offset MPT PR 128B 2.3 (33 psi) 2.0 (29 psi) 340/80 R18 XMCL 335/80 R18 XZLS 151 A2 365/70 R18 SPT9 132B 365/70 R18 EM01 132B 2.5 (36 psi) 2.0 (29 psi) 11 x 18 0 mm (0 ) 375/70 R 20 MPT AC70G 11 x 20 Tires for wheel loader model Increase front tire pressure by 0.5 bar (7.15 psi) during pallet forks operation! Tire size Tire pressure 1 Wheel rims Wheel Front Rear Wheel rim offset MPT PR 335/80 R20 SPT9 136B 375/70 R20 MPT AC70G 132B 335/80 R20 MPT81 365/70 R18 EM SPT9 132B 365/70 R18 EM B 2.5 (36 psi) 2.0 (29 psi) 11 x x 18 0 mm (0 ) 405/70 R18 EM01 141B 405/70 R18 EM SPT9 3.0 (43 psi) 2.5 (36 psi) 13 x Increase front tire pressure by 0.5 bar (7 psi) during pallet forks operation! 6.11 Weights Weight Wheel loader model Wheel loader model Curb weight kg (9260 lb) 4500 kg (9920 lb) Gross weight rating 5500 kg (12125 lb) 6000 kg (13228 lb) Front axle weight rating Rear axle weight rating 3600 kg (7937 lb) 4000 kg (8819 lb) Max. authorized load for towing facility None 1. With standard bucket, operator and full fuel reservoir 6-8 BA 34603_04 US Edition 2.1 * 34603_04b610.fm

9 6.12 Noise levels Sound power level, wheel loader models / Important db(a) Measured value 99.8 Guaranteed value 101 Noise level in the cab 78 Measurement of sound power level according to EC Directive 2000/14 EC. Noise level at the operator's ear measured according to EC Directives 84/532/EEC, 89/514/EEC and 95/27/EEC. Measurements performed on asphalted surface Vibration Vibration Effective acceleration value for the upper extremities of the body Effective acceleration value for the body m s 2 < (< 8.2 feet/s²) m s 2 < (< 1.64 feet/s²) 6.14 Coolant compound table Outside temperature Water 1 Antifreeze 2 Up to C ( F) % by volume % by volume 4 C (39 F) C (14 F) C (-4 F) C (-13 F) C (-22 F) C (-43 F) Water quality at 20 C (68 F)= ph/overall hardness 3 20 dgh 2. SeeFluids and lubricants on page 5-37 BA 34603_04 US Edition 2.1 * 34603_04b610.fm 6-9

10 6.15 Tightening torques, conversion tables General tightening torques Specific tightening torques Screw dimensions 8.8 Tightening torques in Nm 1 (ft. lbs.) M4 3 Nm (2.2 ft. lbs.) 4 Nm (2.9 ft. lbs.) 5 Nm (3.7 ft. lbs.) M5 5.5 Nm (4.1 ft. lbs.) 8 Nm (5.9 ft. lbs.) 10 Nm (7.4 ft. lbs.) M6 10 Nm (7.4 ft. lbs.) 14 Nm (10.3 ft. lbs.) 16 Nm (11.8 ft. lbs.) M8 23 Nm (17 ft. lbs.) 34 Nm (25 ft. lbs.) 40 Nm (29.5 ft. lbs.) M10 46 Nm (33.9 ft. lbs.) 67 Nm (49.4 ft. lbs.) 79 Nm (58.2 ft. lbs.) M12 79 Nm (58.2 ft. lbs.) 115 Nm (84.8 ft. lbs.) 135 Nm (99.5 ft. lbs.) M Nm (92.1 ft. lbs.) 185 Nm (136 ft. lbs.) 220 Nm (162 ft. lbs.) M Nm (144 ft. lbs.) 290 Nm (214 ft. lbs.) 340 Nm (250 ft. lbs.) M Nm (206 ft. lbs.) 400 Nm (295 ft. lbs.) 470 Nm (346 ft. lbs.) M Nm (291 ft. lbs.) 560 Nm (413 ft. lbs.) 660 Nm (486 ft. lbs.) M Nm (398 ft. lbs.) 760 Nm (560 ft. lbs.) 890 Nm (656 ft. lbs.) M Nm (501 ft. lbs.) 970 Nm (715 ft. lbs.) 1150 Nm (848 ft. lbs.) M Nm (737 ft. lbs.) 1450 Nm (1069 ft. lbs.) 1700 Nm (1253 ft. lbs.) M Nm (995 ft. lbs.) 1950 Nm (1437 ft. lbs.) 2300 Nm (1695 ft. lbs.) 1. These values are valid for screws with untreated, non-lubricated surfaces Description Wheel nut Track-rod end (steering cylinder) Piston rod (steering cylinder/track rod) Tightening torque 390 ±10 Nm (287.6 ±7 ft. lbs.) 280 ±10 Nm (206.5 ±7 ft. lbs.) 260 ±10 Nm (191.8 ±7 ft. lbs.) 6-10 BA 34603_04 US Edition 2.1 * 34603_04b610.fm

11 Conversion table: DIN standard USA standard All indications made without engagement. Volume 1 litre = 2.1 pts (pints) 1 litre = 1.06 qts (quarts) 1 litre = 0.26 gals (gallons) 1 cm³ (cubic centimeter) = cu. in. (cubic inches) Lengths 1 mm (millimeter) = (inches) 1 m (meter) = feet 1 m (meter) = yards 1 km (kilometer) = miles Masses (weights) 1 kp/cm² (kilopond/cm²) = 2.2 lbs. 1 kg (kilogram) = lbs. (pounds) 1 g (gram) = oz (ounces) Torques 1 Nm (Newton meter) = ft./lbs. (foot-pounds) 1 Nm (Newton meter) = kp/cm² (kilopond/cm²) 1 Nm (Newton meter) = mkg (meter/kilogram) Pressure 1 kp/cm² (kilopond/cm²) = psi 1 bar = psi Force 1 N (Newton) = lbs. (pounds) 1 hp (horse power) = kw (kilowatt) 1 kw (kilowatt) = 1.36 hp (horse power) BA 34603_04 US Edition 2.1 * 34603_04b610.fm 6-11

12 6.16 Payloads Loader unit with bucket Bucket 1, 2 Bucket capacity 1. Model (WL 750) with tires Model (WL 850) with tires Model (WL 750) with standard bucket Model (WL 850) with standard bucket Wheel loader model Wheel loader model m³ (2.46 cu. ft.) according to ISO 0.85 m³ (2.79 cu. ft.) according to ISO Tipping load 3000 kg (6614 lbs.) 3200 kg (7055 lbs.) Payload 1350 kg (2976 lbs.) 1530 kg (3373 lbs.) Breakout force (lift cylinder) 31 kn (22847 ft. lbs.) 40 kn (29480 ft. lbs.) Breakout force (tilt cylinder) 29 kn (21373 ft. lbs.) 35 kn (25795 ft. lbs.) Scraping depth 50 mm (1.97 ) 60 mm (2.36 ) Loader unit with pallet forks 500 mm (19.69 ) load distance Payload, safety factor 1.25 Payload, safety factor 1.67 Transport position: movable payload, safety factor 1.25 Transport position: movable payload, safety factor 1.67 Wheel loader model Wheel loader model kg (4189 lbs.) 2000 kg (4409 lbs.) 1430 kg (3153 lbs.) 1500 kg (3307 lbs.) 2300 kg (5070 lbs.) 2350 kg (5181 lbs.) 1700 kg (3748 lbs.) 1700 kg (3748 lbs.) Lift height 2800 mm (110.2 ) 3000 mm (118.1 ) 6-12 BA 34603_04 US Edition 2.1 * 34603_04b610.fm

13 Loader unit with pallet forks (foldable fork arms option) Loader unit with load hook (option) 500 mm load distance Wheel loader model Wheel loader model Payload, safety 1900 kg (4189 lbs.) 2000 kg (4409 lbs.) factor 1.25 Payload, safety factor kg (3153 lbs.) 1500 kg (3307 lbs.) Transport position: movable payload, 2300 kg (5070 lbs.) 2350 kg (5181 lbs.) safety factor 1.25 Transport position: movable payload, 1700 kg (3748 lbs.) 1700 kg (3748 lbs.) safety factor 1.67 Lift height 2800 mm (110.2 ) 3000 mm (118.1 ) Payload 1 Payload with extended loader unit and quickhitch tilted in Payload with extended loader unit and quickhitch Wheel loader model Wheel loader model kg (4189 lbs.) 1700 kg (3748 lbs.) 1400 kg (3086 lbs.) 1350 kg (2976 lbs.) 1. Payloads apply with lifting gear (chains, cables, suspension devices) BA 34603_04 US Edition 2.1 * 34603_04b610.fm 6-13

14 6.17 Dimensions: wheel loader with bucket, model (WL 750) Fig. 164: Machine dimensions model Dimensions Overall length mm ( ) Overall height 2, mm (97.64 ) Overall height with rotating beacon mm ( ) Overall width without bucket mm (67.72 ) Overall width mm (68.90 ) Ground clearance in transport position of loader unit 200 mm (7.87 ) Ground clearance 2 below rear axle gearbox 300 mm (11.81 ) Pin height 3065 mm ( ) Load-over height 2915 mm ( ) Dump height 2400 mm (94.49 ) Dump reach 750 mm (29.52 ) Dump-in angle 50 Dump-out angle 45 Track width, front/rear 1400 mm (55.11 ) Wheelbase (front/rear axles) 1920 mm (75.59 ) Turning radius mm ( ) 1. With standard bucket order no With tires mm with protective FOPS screen (option) 4. With outside mirrors folded in 5. Measured at outer edge of wheel 6-14 BA 34603_04 US Edition 2.1 * 34603_04b610.fm

15 6.18 Dimensions: wheel loader with bucket, model (WL 850) Fig. 165: Machine dimensions model Dimensions Overall length mm ( ) Overall height 2, mm (98.82 ) Overall height with rotating beacon mm ( ) Overall width without bucket mm (67.72 ) Overall width mm (72.83 ) Ground clearance in transport position of loader unit 200 mm (7.87 ) Ground clearance 2 below rear axle gearbox 300 mm (11.81 ) Pin height 3250 mm ( ) Load-over height 3100 mm ( ) Dump height 2500 mm (98.42 ) Dump reach 660 mm (25.98 ) Dump-in angle 50 Dump-out angle 45 Track width, front/rear 1400 mm (55.11 ) Wheelbase (front/rear axles) 1920 mm (75.59 ) Turning radius mm ( ) 1. With standard bucket order no With tires mm with protective FOPS screen (option) 4. With outside mirrors folded in 5. Measured at outer edge of wheel BA 34603_04 US Edition 2.1 * 34603_04b610.fm 6-15

16 6.19 Dimensions: wheel loader with pallet forks, model / (WL 750/WL 850) d a b c Fig. 166: Machine dimensions with pallet forks Wheel loader model mm mm 2 a Pin height ( ) ( ) 2800 mm mm 2 b Pallet height ( ) ( ) c Dump-in angle in transport position 3 17 d Dump-out angle With tires With tires With pallet forks order no (1000 mm or ) Other dimensions -seedimensions: wheel loader with bucket, model (WL 750) on page seedimensions: wheel loader with bucket, model (WL 850) on page BA 34603_04 US Edition 2.1 * 34603_04b610.fm

17 KRAMER-WERKE GmbH keep abreast of the latest technical developments and constantly improve their products. For this reason, we may from time to time need to make changes to diagrams and descriptions in this documentation which do not reflect products which have already been delivered and which will not be implemented on these machines. Technical data, dimensions and weights are given as an indication only. Responsibility for errors or omissions not accepted. No reproduction or translation of this publication, in whole or part, without the written consent of KRAMER-WERKE GmbH. All rights under the provision of the Copyright Act are reserved. Kramer-Werke GmbH Wacker-Neuson-Str. 1 D Pfullendorf Germany

18 Wacker Neuson Corporation P. O. Box 9007 Menomonee Falls, WI Phone: (262) Fax: (262) Phone: (800) Kramer-Werke GmbH Wacker-Neuson-Str. 1 D Pfullendorf Phone info@kramer.de Order no US

Up to serial number AH From serial number AH00611 Product. Yanmar diesel engine Type Yanmar 3TNV 88-SNS Yanmar 3TNV88-BSNS Design

Up to serial number AH From serial number AH00611 Product. Yanmar diesel engine Type Yanmar 3TNV 88-SNS Yanmar 3TNV88-BSNS Design 6 6.1 Model 2503 Engine Engine Model 2503 Tier II Tier III Up to serial number AH00610 From serial number AH00611 Product Yanmar diesel engine Type Yanmar 3TNV 88-SNS Yanmar 3TNV88-BSNS Design Water-cooled

More information

L45B VOLVO COMPACT WHEEL LOADER

L45B VOLVO COMPACT WHEEL LOADER VOLVO COMPACT WHEEL LOADER L45B Gross Power: SAE J1995 81/110 kw/hp Net Power: SAE J1349 73/99 kw/hp Operating Weight: 8,2-8,4 t Capacities: 1,3-2,5 m 3 High-performance, low environmental impact diesel

More information

US Wheel loaders WL 750 WL 850 OPERATOR'S MANUAL.

US Wheel loaders WL 750 WL 850 OPERATOR'S MANUAL. Wheel loaders WL 750 1000184973 US 2.1 0909 OPERATOR'S MANUAL 1 0 0 0 1 8 4 9 7 3 www.wackerneuson.com 1 1.1 Important information on this Operator's Manual Abbreviations/symbols This Operator's Manual

More information

DL250 TECHNICAL DATA

DL250 TECHNICAL DATA DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

DL250TC TECHNICAL DATA

DL250TC TECHNICAL DATA DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

Doosan Infracore DL220 TECHNICAL DATA

Doosan Infracore DL220 TECHNICAL DATA Doosan Infracore Construction Equipment DL220 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 148 / 2,200 (GROSS)

More information

Doosan Infracore DX55W TECHNICAL DATA

Doosan Infracore DX55W TECHNICAL DATA Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE

More information

ZL302C VOLVO COMPACT WHEEL LOADER

ZL302C VOLVO COMPACT WHEEL LOADER VOLVO COMPACT WHEEL LOADER ZL302C Gross Power: SAE J1995 22,5/31 kw/hp Net Power: SAE J1349 22/30 kw/hp Operating Weight: 2,1 t Bucket Capacities: 0,3-0,5 m 3 High-performance, low environmental impact

More information

DL350 TECHNICAL DATA

DL350 TECHNICAL DATA DL350 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL08 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER (GROSS) hp / rpm 232 / 2,000 (SAE J1995) kw / rpm 172 / 2,000 RATED

More information

igh-performance, low environmental impact diesel engine: quiet, low emissions, economical fuel consumption.

igh-performance, low environmental impact diesel engine: quiet, low emissions, economical fuel consumption. VOLVO WHEEL LOADER L50F ross Power : G SAE J19 = 87 kw/ 117 hp N et Power : SAE J1349 = 85 kw/ 115 hp O perating Weight : 9.4 9.9 t B ucket Capacities : 1.4 2.5 m3 igh-performance, low environmental impact

More information

T550 COMPACT TRACK LOADER SPECIFICATIONS

T550 COMPACT TRACK LOADER SPECIFICATIONS T550 COMPACT TRACK LOADER SPECIFICATIONS Loader Dimensions Dimensions are given for loader equipped with standard tracks and 68 in. Construction and Industrial bucket and may vary with other bucket types.

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

428E Backhoe Loader. Engine Cat 3054C* C4.4** Steering. Brakes. Axles

428E Backhoe Loader. Engine Cat 3054C* C4.4** Steering. Brakes. Axles Engine Cat 3054C* C4.4** Rated power (standard) 2,200 rpm 2,200 rpm Gross SAE J1995 68.5 kw/93 hp 70 kw/95 hp Net ISO 9249 65 kw/89 hp 67 kw/91 hp Net 80/1269/EEC 65 kw/89 hp 67 kw/91 hp Rated power (optional)

More information

ZL502C VOLVO COMPACT WHEEL LOADER. Gross Power: SAE J / 56 kw/ hp Net Power: SAE J / 54 kw/ hp

ZL502C VOLVO COMPACT WHEEL LOADER. Gross Power: SAE J / 56 kw/ hp Net Power: SAE J / 54 kw/ hp VOLVO COMPACT WHEEL LOADER ZL502C Gross Power: SAE J1995 41/ 56 kw/ hp Net Power: SAE J1349 40/ 54 kw/ hp Operating Weight: 4,4-4,5 t Bucket Capacities: 0,7-1,3 m 3 High-performance, low environmental

More information

S530 SKID-STEER LOADER SPECIFICATIONS

S530 SKID-STEER LOADER SPECIFICATIONS Loader Dimensions S530 SKID-STEER LOADER SPECIFICATIONS Dimensions are given for loader equipped with standard tires and 68 inch Construction and Industrial bucket and may vary with other bucket types.

More information

Technical Specifications

Technical Specifications 140 Motor Grader Technical Specifications Engine Engine Model Cat C9.3 Net Power ISO 9249/SAE J1349 186 kw 250 hp Net Power EEC 80/1269 186 kw 250 hp Net Power All-Wheel Drive (AWD) 201 kw 270 hp VHP Plus

More information

Technical description LR 622 Crawler loader

Technical description LR 622 Crawler loader Technical description LR 622 Crawler loader Engine output 97 kw/132 HP Operating weight 15.4 17.0 t /34,000 37,500 lb Bucket capacity 1.54 1.80 m 3 /2.01 2.35 cu.yd. Hydrostatic travel drive with electronic

More information

T B. Telescopics Specifications. Dimensions

T B. Telescopics Specifications. Dimensions Dimensions (A) Overall length (with forks) 7425.0 mm (B) Overall length (with carriage) 6164.0 mm (E) Overall height (with rotating beacon) 2670.0 mm (F) Overall height 2476.0 mm (G) Carriage rotation

More information

SWING LOADER. AS 210e. > Experience of your worksite

SWING LOADER. AS 210e. > Experience of your worksite SWING LOADER AS 210e > Experience of your worksite SWING LOADER AS 210e LET S HAVE A LOOK 129 kw / 175 hp at 2200 rpm Dump height 3.42 m Max. swing range of 180 (2 x 90 ) with all attachments 180 225%

More information

Volvo l60g, L70G, L90G IN DETAIL.

Volvo l60g, L70G, L90G IN DETAIL. Volvo lg,, IN DETAIL. Engine 6-cylinder, 6 liters inline turbocharged diesel engine with an advanced fuel injection system with the common rail. Fuel is distributed under high pressure from a high-pressure

More information

2070LPT. Tele wheel loader. Technical specifications 2070 CX50 LP T 2070 CX80 LP T

2070LPT. Tele wheel loader. Technical specifications 2070 CX50 LP T 2070 CX80 LP T 2070LPT Tele wheel loader Technical specifications 2070 CX50 LP T 2070 CX80 LP T Engine data Manufacturer Perkins Deutz Engine type 404 D-22 TD2011 L04w Cylinders 4 4 Engine performance (max.) kw (hp)

More information

WL32 Articulated Wheel Loaders. WL 32 Articulated Wheel Loader offers power and performance

WL32 Articulated Wheel Loaders. WL 32 Articulated Wheel Loader offers power and performance WL32 Articulated Wheel Loaders WL 32 Articulated Wheel Loader offers power and performance The WL 32 is equipped with a powerful Perkins 4-cylinder, Tier IV Final diesel engine that delivers high performance.

More information

Engine. Engine Torque. Weights. Steering. 924G Wheel Loader specifications

Engine. Engine Torque. Weights. Steering. 924G Wheel Loader specifications Engine Model Caterpillar 3056E DIT ATAAC Rated Net Power @ 2,300 rpm SAE J1349 96 kw 129 hp ISO 9249 97 kw 130 hp EEC 80/1269 97 kw 130 hp Maximum Net Power @ 1,900 rpm SAE J1349 102 kw 137 hp ISO 9249

More information

S P E C I F I C A T I O N S

S P E C I F I C A T I O N S S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m

More information

STABLE. STRONG. STEADY.

STABLE. STRONG. STEADY. 13.8-15.7 t 90 kw (121 HP) 0.7-1.0 m 3 STABLE. STRONG. STEADY. WheelED Excavator 140W www.atlasgmbh.com Technical specification 140W Technical specification ENGINE Power rating... 90 kw (121 HP) Number

More information

SYSTEM 180 AS 90. > The loader specialist. > Swing Shovel Loader m 3

SYSTEM 180 AS 90. > The loader specialist. > Swing Shovel Loader m 3 > The loader specialist > Swing Shovel Loader 0.9 1.4 m 3 Let s have a look Tipping loads with standard bucket Working area with 4-in-1 bucket 53.5 kw / 73 hp at 2500 min -1 3.240 kg 100% 80 100% max.

More information

JCB LOADALL / /

JCB LOADALL / / MAX PAYLOAD: 4,000 lb (1,814 kg) MAX LIFT HEIGHT: 13 ft 3 in (4.0 m) MAX HORSEPOWER: 49 hp (37 kw) B A 520-40 H D E C F G 520-40 STATIC DIMENSIONS 10.00 x 16.5 12 ply Tires 12.00 x 16.5 10 ply Tires A

More information

Wheel loader. Technical specifications. Engine data Standard. Cylinders 4. Abgasnormstufe Abgasnachbehandlung

Wheel loader. Technical specifications. Engine data Standard. Cylinders 4. Abgasnormstufe Abgasnachbehandlung 4080 Wheel loader Technical specifications Engine data Standard Manufacturer Perkins Engine type 854F-E34TA Cylinders 4 Engine performance (max.) / optional 55.4 ( 75 ) kw (hp) at rpm (max.) 2200 rpm Cubic

More information

Cat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.

Cat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading. Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

Wheel loader. Technical specifications. Engine data Standard. Cylinders 4. Abgasnormstufe Abgasnachbehandlung

Wheel loader. Technical specifications. Engine data Standard. Cylinders 4. Abgasnormstufe Abgasnachbehandlung 5080 Technical specifications Engine data Standard Manufacturer Perkins Engine type 854F-E34TA Cylinders 4 Engine performance (max.) 55.4 ( 75 ) kw (hp) at rpm (max.) 2200 rpm Cubic capacity 3400 cm³ Cooling

More information

V80 COMPACT WHEEL LOADER. Operating weight kg Engine power. 45 kw (61 CV) Bucket capacity 0,8 1,2 m 3 Lifting force

V80 COMPACT WHEEL LOADER. Operating weight kg Engine power. 45 kw (61 CV) Bucket capacity 0,8 1,2 m 3 Lifting force COMPACT WHEEL LOADER V80 Operating weight 4 900 kg Engine power 45 kw (61 CV) Bucket capacity 0,8 1,2 m Lifting force 48 kn Breakout force at bucket edge 45,9 kn Absolute reliability STRAIGHT AND RIGID

More information

WHEEL LOADER 938H WHEEL LOADER 938H. Power Generation - Bulk Materials Standards I. GENERAL: DESCRIPTIONS FOR CATERPILLAR MODEL 938H WHEEL LOADER:

WHEEL LOADER 938H WHEEL LOADER 938H. Power Generation - Bulk Materials Standards I. GENERAL: DESCRIPTIONS FOR CATERPILLAR MODEL 938H WHEEL LOADER: Power Generation - Bulk Materials Standards I. GENERAL: This standard is intended to provide specifications for the procurement of Caterpillar Model 938H Wheel Loaders that meet specific area operational

More information

WL70. The powerhouse. Articulated Wheel Loaders. Engine

WL70. The powerhouse. Articulated Wheel Loaders. Engine WL70 Articulated Wheel Loaders The powerhouse Thanks to the latest engine technology pursuant to the latest exhaust emission standard, the WL70 offers an extremely efficient, but also powerful engine that

More information

WHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version

WHEEL LOADER WHEEL LOADER. ZW series Parallel linkage tool carrier version ZW series Parallel linkage tool carrier version WHEEL LOADER WHEEL LOADER Model Code: ZW140PL / ZW150PL / ZW1PL Operating Weight: ZW140PL: 11 950-12 010 ZW150PL: 13 370-13 400 ZW1PL: 15 240-15 430 Bucket

More information

With Tier 4 Interim Engine installed. hyundai heavy industries

With Tier 4 Interim Engine installed. hyundai heavy industries With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3")

9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7) Digging depth, boom extended 5860 mm (19'3) 9.50M BACKHOE LOADER Net Horsepower 70 kw (95 hp) Operating Weight 8900 kg (19,621 lb) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3") Safe ROPS/FOPS operator

More information

t 116 kw (158 HP) m 3. WheelED Excavator 150W 190W.

t 116 kw (158 HP) m 3. WheelED Excavator 150W 190W. 18.9-20.8 t 116 kw (158 HP) 0.76-1.3 m 3 STABLE. STRONG. STEADY. WheelED Excavator 150W 190W www.atlasgmbh.com Technical SPECIFICATION 190W Technical specifications ENGINE Power rating acc. to ISO 9249...116

More information

L35B VOLVO COMPACT WHEEL LOADER

L35B VOLVO COMPACT WHEEL LOADER VOLVO COMPACT WHEEL LOADER L35B Gross Power: SAE J1995 57/77 kw/hp Net Power: SAE J1349 55/75 kw/hp Operating Weight: 5,9-6,0 t - Z-bar linkage 6,1-6,3 t - TP-linkage Bucket Capacities: 1,05-1,6 m 3 -

More information

HITACHI LX290E. engine rated power 228 kw / 306 HP. operating weight kg. bucket capacity m 3

HITACHI LX290E. engine rated power 228 kw / 306 HP. operating weight kg. bucket capacity m 3 HITACHI LX290E engine rated power 228 kw / 306 HP operating weight 21 455-23 075 kg bucket capacity 4.0-4.5 m 3 EQUIPMENT Engine Steering Make............................................. Isuzu Model........................................

More information

121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED

121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED 121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 C*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3

More information

V100 COMPACT WHEEL LOADER. Operating weight kg Engine power. 55,4 kw (74 CV) Bucket capacity 1,0 1,55 m 3 Lifting force (arm)

V100 COMPACT WHEEL LOADER. Operating weight kg Engine power. 55,4 kw (74 CV) Bucket capacity 1,0 1,55 m 3 Lifting force (arm) COMPACT WHEEL LOADER V100 Operating weight 5 800 kg Engine power 55,4 kw (74 CV) Bucket capacity 1,0 1,55 m Lifting force (arm) 61 kn Breakout force at bucket edge 55 kn Multipurpose and economic STRAIGHT

More information

21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED

21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED 21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 B*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3 (3.4

More information

Engine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged,

Engine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged, SK/SK TC Engine SK SK TC Manufacturer and Model John Deere PowerTech TM E HT7 turbocharged, standard John Deere PowerTech E HT6 turbocharged, standard Non-Road Emissions Standard EPA Interim Tier /EU Stage

More information

All-rounder. Wacker Neuson All-Wheel Dumpers

All-rounder. Wacker Neuson All-Wheel Dumpers All-rounder Wacker Neuson All-Wheel Dumpers 3001 4001 5001 6001 B3 B2 F H E G D C L3 L1 L L2 H1 K B1 B 6001s Front-tipping DIMENSIONS 3001 3001 4001 4001 5001 (Front-Tipping) (Swivel-tipping) (Swivel-tipping)

More information

B75W COMPACT WHEELED EXCAVATOR. Operating weight Dig depth Engine power Bucket capacity Lifting force (arm) Breakout force at bucket edge

B75W COMPACT WHEELED EXCAVATOR. Operating weight Dig depth Engine power Bucket capacity Lifting force (arm) Breakout force at bucket edge COMPACT WHEELED EXCAVATOR B75W Operating weight Dig depth Engine power Bucket capacity Lifting force (arm) Breakout force at bucket edge 7 400-8 000 kg 3,5-3,9 m 55,4 kw (75 hp) 87 303 l 38 kn 30 kn Compact

More information

CX210C HYDRAULIC EXCAVATOR HYDRAULIC SYSTEM HYDRAULIC CONTROLS ENGINE MONITOR SYSTEM ELECTRICAL SYSTEM

CX210C HYDRAULIC EXCAVATOR HYDRAULIC SYSTEM HYDRAULIC CONTROLS ENGINE MONITOR SYSTEM ELECTRICAL SYSTEM CX210C HYDRAULIC EXCAVATOR ENGINE Brand Model Type ISUZU GI-4HK1X 4-stroke engine, water-cooled, 4 cylinder common rail injection system, turbocharged with air-cooled intercooler, with tier 3 emission

More information

LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm

LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40

More information

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52.

MATERIAL HANDLER. MHL350 E TIER 4i. Specifications. Features. Operating weight 70,548-78,264 lbs ( t) Reach up to 52. MHL35 E TIER 4i MATERIAL HANDLER Specifications Operating weight 7,548-78,264 lbs (32 35.5 t) Engine output 214 hp (16 kw) Reach up to 52.5 ft (16 m) Features Fuel efficient high output engine with a reduction

More information

Crawler Tractor PR 734-4

Crawler Tractor PR 734-4 Crawler Tractor PR 734-4 litronic` Engine output: 150 kw / 204 HP Operating weight: 17,960 20,000 kg Basic machine Engine Liebherr Diesel engine Rating (ISO 9249) Rating (SAE J1349) Rated speed Displacement

More information

140H. Motor Grader. Global Version. Cat 3176 ETA Engine. Weights. Variable Horsepower Arrangement. Moldboard. Variable Horsepower Plus Arrangement

140H. Motor Grader. Global Version. Cat 3176 ETA Engine. Weights. Variable Horsepower Arrangement. Moldboard. Variable Horsepower Plus Arrangement 140H Motor Grader Global Version Cat 3176 ETA Engine Base Power (all gears) 123 kw Variable Horsepower Arrangement - gears 1-3 123 kw - gears 4-8 138 kw Variable Horsepower Plus Arrangement - gears 1-3

More information

US 1.0. Wheel loaders WL 180 WL 280 OPERATOR S MANUAL

US 1.0. Wheel loaders WL 180 WL 280 OPERATOR S MANUAL Wheel loaders WL 180 WL 280 1000184972 US 1.0 0908 OPERATOR S MANUAL 1 0 0 0 1 8 4 9 7 2 Introduction 1 Introduction 1.1 Important information on this Operator's Manual Abbreviations, marks, symbols This

More information

t 95 kw (130 hp) m 3. WheelED Excavator 150W.

t 95 kw (130 hp) m 3. WheelED Excavator 150W. 15.6-17.3 t 95 kw (130 hp) 0.7-1.1 m 3 STABLE. STRONG. STEADY. WheelED Excavator 150W www.atlasgmbh.com Technical INFORMATION 150W Technical Information ENGINE Power rating...95 kw (130 hp) RPM...1800/min

More information

T5522 Telehandler. Technical specifications. Engine data. Cylinders 4. Cooling system Page: 1 / 9

T5522 Telehandler. Technical specifications. Engine data. Cylinders 4. Cooling system Page: 1 / 9 T5522 Telehandler Technical specifications Engine data Manufacturer Perkins Engine type (optional) 404D-22 (404F-22T) Cylinders 4 Engine performance (max.) /optional 36,3 / 44,7 ( 49 / 61 ) kw (hp) at

More information

Motor Grader. BG 240 T-5 (6x4) / BG 240 TA-5 (6x6)

Motor Grader. BG 240 T-5 (6x4) / BG 240 TA-5 (6x6) Motor Grader BG 240 T-5 (6x4) / BG 240 TA-5 (6x6) BG 240 T-5 (6 x 4) BG 240 TA-5 (6 x 6) Drivers cab tiltable for easy service Hydrostatic front wheel drive as option available The BG 240 is one of the

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

BACKHOE LOADERS. Turbocharged Perkins Engine Power 100 hp / 74,5 kw Operating Weight 8,1-8,2 tons Bucket Capacity 1,1 m 3

BACKHOE LOADERS. Turbocharged Perkins Engine Power 100 hp / 74,5 kw Operating Weight 8,1-8,2 tons Bucket Capacity 1,1 m 3 BACKHOE LOADERS Turbocharged Perkins Engine Power 100 hp / 74,5 kw Operating Weight 8,1-8,2 tons Bucket Capacity 1,1 m 3 SPECIAL FEATURES Improved Performance The new generation CUKUROVA 883-885 model

More information

NET HORSEPOWER 40.3 kw rpm OPERATING WEIGHT 2940 kg 6,480 lb SK820-5 SKID STEER LOADER. Photos may include optional equipment.

NET HORSEPOWER 40.3 kw rpm OPERATING WEIGHT 2940 kg 6,480 lb SK820-5 SKID STEER LOADER. Photos may include optional equipment. NET HORSEPOWER 40.3 kw 54 HP @ 2800 rpm OPERATING WEIGHT 2940 kg 6,480 lb SK820-5 SK 820 SKID STEER LOADER Photos may include optional equipment. SK820-5 S KID S TEER L O ADER WALK-AROUND Maximum Performance

More information

JCB BACKHOE LOADER 2CX 12 FT

JCB BACKHOE LOADER 2CX 12 FT JCB BACKHOE LOADER 1 FT B C F E H D A G STATIC DIMENSIONS JCB 1FT features four wheel drive, four wheel steering, four equal sized tires, a heavy duty one piece mainframe, componentized driveline and fully

More information

Doosan Infracore DX225LL TECHNICAL DATA

Doosan Infracore DX225LL TECHNICAL DATA Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)

More information

JCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS

JCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40, 524-50, 527-55 SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40 MAX. PAYLOAD: MAX. LIFT HEIGHT: MAX. HORSEPOWER: 4000lb 13ft 3in 50hp B A JCB LOADALL 520-40 H D E C F G STATIC DIMENSIONS

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler

More information

A Product of Hard Work ROUGH TERRAIN FORK LIFT

A Product of Hard Work ROUGH TERRAIN FORK LIFT A Product of Hard Work ROUGH TERRAIN FORK LIFT Rough terrain fork lifts Lift capacities of 2.6 to 4 tonnes and lift heights from 3.6 to 6.70m 63kW (84hp) engine delivers powerful performance JCB Synchro

More information

INTO THE FUTURE WITH NEW DRIVE. The 5055e eloader

INTO THE FUTURE WITH NEW DRIVE. The 5055e eloader INTO THE FUTURE WITH NEW DRIVE The 5055e eloader Completely free of emissions at full power Discover the first fully electric wheel loader of its size With the 5055e eloader, CO 2 restrictions, soot-limits,

More information

ROPS and FOPS canopy provides A large comfortable operators area. Machines with a cab get air conditioning as standard

ROPS and FOPS canopy provides A large comfortable operators area. Machines with a cab get air conditioning as standard Fully tilting hood for easy engine access designed to get your job done. Tier 3 94hp (70kw) charge air cooled engine for smooth and economical operation ROPS and FOPS canopy provides A large comfortable

More information

DRIVETRAIN. NOTE: Travel speeds at full engine throttle. ELECTRICAL

DRIVETRAIN. NOTE: Travel speeds at full engine throttle. ELECTRICAL 321D Articulated Wheel Loader ENGINE Model... Perkins 1004-42 Type... 4-stroke, turbocharged Cylinders... 4 Bore/Stroke... 4.06 x 5.00 (105 X 127 mm) Displacement... 258 in 3 (4.23 L) Fuel injection...

More information

MATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m

MATERIAL HANDLER MHL350 E. Specifications. Features. Up to 52.5 ft 16 m MHL35 E MATERIAL HANDLER Specifications Standard Machine Weight Engine output Reach 75, lbs 34 t 215 hp 16 kw Up to 52.5 ft 16 m Features Fuel saving ECO & ECO+ operating modes enhance flexibility while

More information

SPECIFICATIONS. General Specifications. Dimensions

SPECIFICATIONS. General Specifications. Dimensions General s Engine RPM Setting Spark Plug TX 420 22306 Ser #200000100-200000999 / CH20S-64637 Ser #210000100-240000999 / CH20S-64656 Ser #250000100-270000999 / CH20S-64725 Ser #280000100-280000999 / CH20S-64762

More information

STABLE. STRONG. STEADY.

STABLE. STRONG. STEADY. 15.6-17.3 t 95 kw (130 HP) 0.7-1.1 m 3 STABLE. STRONG. STEADY. WHEELED EXCAVATOR 150W WWW.ATLASGMBH.COM TECHNICAL INFORMATION 150W Technical Information ENGINE Power rating... 95 kw (130 HP) Number of

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary

Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Technical Specifications SENNEBOGEN Rubber Tired Material Handler preliminary Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier FInal 13 HP (97 kw), lb

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

WA100M-8. EU Stage IV Engine WHEEL LOADER BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 69,8 kw / 93, rpm.

WA100M-8. EU Stage IV Engine WHEEL LOADER BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 69,8 kw / 93, rpm. WA100M-8 EU Stage IV Engine WHEEL LOADER ENGINE POWER 69,8 kw / 93,6 HP @ 2.000 rpm OPERATING WEIGHT 6.925-7.230 kg BUCKET CAPACITY 1,05-1,8 m³ 2 Walk-Around ENHANCED FUEL EFFICIENCY AND ENVIRONMENTAL

More information

STABLE. STRONG. STEADY.

STABLE. STRONG. STEADY. 14.0-15.9 t 95 kw (130) HP 0.7-1.0 m3 STABLE. STRONG. STEADY. WHEELED EXCAVATOR 140W Bigfoot WWW.ATLASGMBH.COM 140W Bigfoot C M Y CM MY CY CMY K 2 WHEELED EXCAVATOR 140W Bigfoot 140W Bigfoot GREATEST RANGE

More information

MATERIAL HANDLER MHL360 D. Specifications. Features

MATERIAL HANDLER MHL360 D. Specifications. Features MHL360 D MATERIAL HANDLER Specifications Operating Weight Engine Output Reach 97,003 lbs - 101,413 lbs 249 hp Up to 59 ft Features Powerful, fuel efficient 249 hp engine matched with hydraulic functions

More information

TLB840R. Tier 4 final 74hp (55kw) charge air cooled engine for smooth and economical operation designed to get your job done.

TLB840R. Tier 4 final 74hp (55kw) charge air cooled engine for smooth and economical operation designed to get your job done. TLB840R Fully tilting hood for easy engine access Tier 4 final 74hp (55kw) charge air cooled engine for smooth and economical operation designed to get your job done. Solid cast nose provides improved

More information

TH215 Compact Telehandler

TH215 Compact Telehandler TH215 Compact Telehandler Engine Model Gross Power Weights Operating Weight Operating Specifications Rated Load Capacity Maximum Lift Height Cat 3054B-DI 63 kw 84 hp 5500 kg 12,100 lb 2500 kg 5.5 m 5,500

More information

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb) 555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements

More information

Volvo low emission directinjected,

Volvo low emission directinjected, VOLVO ARTICULATED HAULER A25C4X4 Engine output SAE J1349: Net 187 kw (251 hp) Gross 190 kw (255 hp) Body volume: 13,0 m3 (17.0 yd3) Load capacity: 22,5 t (25 sh tn) Volvo low emission directinjected, turbocharged,

More information

MATERIAL HANDLER MHL360 F HD. Features. Specifications

MATERIAL HANDLER MHL360 F HD. Features. Specifications MHL360 F HD MATERIAL HANDLER Features Fuel saving ECO & ECO+ operating modes enhance flexibility while reducing operating costs Powerful, fuel efficient 255 hp 190 kw engine matched with hydraulic functions

More information

Technical Specifications SENNEBOGEN Rubber Tired Material Handler

Technical Specifications SENNEBOGEN Rubber Tired Material Handler Technical Specifications SENNEBOGEN Rubber Tired Material Handler Leading Through Innovation Engine Model Net Power Operating Weight M/rubber tired Cummins QSB., Tier F 13 HP (97 kw),8 lb (3,9 kg) Reach

More information

MATERIAL HANDLER MHL320 D. Specifications. Features

MATERIAL HANDLER MHL320 D. Specifications. Features MHL D MATERIAL HANDLER Specifications Standard Machine Weight Engine Output Reach, lbs 9 t hp kw Up to ft. m Features Fuel efficient and powerful, the hp kw turbo diesel engine enables movement of loads

More information

Volvo High-performance, lowemission

Volvo High-performance, lowemission VOLVO ARTICULATED HAULER A35C6X6 Engine output SAE J1349: Net 262 kw 351 hp Gross 267 kw 358 hp Body volume: 19 m 3 25 yd 3 Load capacity: 32 t 35 sh ton Volvo High-performance, lowemission direct-injected,

More information

534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)

534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb) 534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice

More information

TH210 Compact Telehandler

TH210 Compact Telehandler TH210 Compact Telehandler Engine Model Gross Power Weights Operating Weight Operating Specifications Rated Load Capacity Maximum Lift Height Cat 3054B-DI 63 kw 84 hp 5000 kg 11,000 lb 2200 kg 5.2 m 4,850

More information

TD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R.

TD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R. CRAWLER DOZERS EPA Tier 3/EU Stage IIIA STANDARD, LGP ENGINE Make and model Emissions standard Displacement Bore and stroke Gross horsepower, SAE J1995 Cummins QSB3.3 EPA Tier 3/EU Stage IIIA 3.3 l (199

More information

Engine Gross Power Operating Weight Bucket Capacity 835H

Engine Gross Power Operating Weight Bucket Capacity 835H Engine Perkins 1204F Tier 4 Final Gross Power 131 hp (98 kw) Operating Weight 23,760-24,640 lbs (10,800-11,200 kg) Bucket Capacity 2.5 yd 3 (1.9 m 3 ) 835H 2 3 4 MORE POWER LESS CONSUMPTION The new 835H

More information

M325B MH Wheeled Material Handler

M325B MH Wheeled Material Handler M2B MH Wheeled Material Handler Engine Engine Model 11 TA Net Flywheel Power 12 kw 18 hp Operating Specifications Maximum Reach. m.9 ft Cat Cab Riser 1.9 m.4 ft Weights Operating Weight 7 2 kg 82,4 lb

More information

Doosan Infracore DX700LC TECHNICAL DATA

Doosan Infracore DX700LC TECHNICAL DATA Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)

More information

STABLE. STRONG. STEADY. WheelED Excavator 180Wsr t 115 kw (157 HP) m 3.

STABLE. STRONG. STEADY. WheelED Excavator 180Wsr t 115 kw (157 HP) m 3. STABLE. STRONG. 17.5-21.0 t 115 kw (157 HP) STEADY. 0.82-1.12 m 3 WheelED Excavator 180Wsr www.atlasgmbh.com Technical SPECIFICATION 180Wsr Specification ENGINE Power rating acc. to ISO 9249...115 kw (157

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

A Product of Hard Work COMPACT LOADING SHOVEL 403

A Product of Hard Work COMPACT LOADING SHOVEL 403 A Product of Hard Work Go anywhere, do anything compact performance Compact dimensions allow the 403 to access restricted farm buildings and other sites Hydrostatic transmission makes it easy for anyone

More information

MATERIAL HANDLER MHL340 D. Features. Specifications

MATERIAL HANDLER MHL340 D. Features. Specifications MHL340 D MATERIAL HANDLER Specifications Operating Weight Engine Output Reach 60,627-63,934 lbs 171 hp Up to 44.9 ft Features With its long reach and high lifting capacities, the MHL340 D from Terex Fuchs

More information

Specifications. Overview Press Releases Pricing & Changes Equipment Specifications Dimensions Color & Trim About Audi. Technical Specifications

Specifications. Overview Press Releases Pricing & Changes Equipment Specifications Dimensions Color & Trim About Audi. Technical Specifications Technical Engineering / Performance A7 S7 Engine design Engine type V6 Engine V8 Engine Arrangement Front mounted- longitudinal Front mounted- longitudinal Bore (in) 3.33 (84.5 mm) 3.33 (84.5 mm) Stroke

More information

Volvo High-performance, lowemission

Volvo High-performance, lowemission A406X6 VOLVO ARTICULATED HAULER Engine output SAE J1349: Net 295 kw 395 hp Gross 297 kw 398 hp Body volume: 22 m 3 29.0 yd 3 Load capacity: 36 t 40 sh ton Volvo High-performance, lowemission direct-injected,

More information

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

JCB TRACKED EXCAVATOR JS290LC TIER III

JCB TRACKED EXCAVATOR JS290LC TIER III K I C D L M J F E A B H G STATIC DIMENSIONS Dimensions in ft-in (millimetres) LC A Track length on ground 13-1 (3990) B Undercarriage overall length 15-11 (4860) C Track gauge 8-6 (2600) D Width over tracks

More information

EC380EHR, EC480EHR VOLVO EXCAVATORS

EC380EHR, EC480EHR VOLVO EXCAVATORS , VOLVO EXCAVATORS Volvo, E480EHR in detail. Engine The latest generation, Volvo engine Tier 4f (Stage IV) emissions compliant diesel engine fully meets the demands of the latest, emsissions regulations.

More information

2.63C 2.63C 3.63G WHEEL LOADER EQUIPMENT 2.63C 2.63C 3.63G

2.63C 2.63C 3.63G WHEEL LOADER EQUIPMENT 2.63C 2.63C 3.63G R I G I N A L 3.63G WHEEL LADER 3.63G Acoustic warnings Plugs with keys for fuel and hydraulic tanks Bucket with bolted teeth RPS-FPS cab with heating and pressurization fan, with front and rear windscreen

More information

420E/420E IT Specifications

420E/420E IT Specifications Engine Engine Model (Standard) Gross Power SAE J1995 Gross Power ISO 14396 Net Power SAE J1349 Net Power ISO 9249 Net Power EEC 80/1269 Net Peak Power @ 1,800 rpm SAE J1349 Net Peak Power @ 1,800 rpm ISO

More information