MVF S.r.l. Via San Giovanni Bosco, Alessandria Tel Fax Web:
|
|
- Ethan Merritt
- 6 years ago
- Views:
Transcription
1 MV S.r.l. Via San Giovanni osco, Alessandria Tel ax Web: -mail: info@mvf.it
2 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series TD-SILNT - MOD 16 TO 1 Low profile Mixed-flow fans with soundabsorbent insulation. xtremely quiet. ertified of Approval Noise Abatement Society (TD-35, TD-5, TD-8 and TD-1 models). Manufactured in plastic material, with a specifically designed internal skin to direct the sound waves at the right angle for them to be captured by the sound-absorbent material (1). itted with rubber gaskets on the inlet and outlet to absorb vibrations, a body that can be dismantled. onnection box can be rotated 36º, to facilitate easy connection of the power cable. Motors Speed controlable 23V-5Hz motor, of two speed motors. IP44. Motors are class, with ball bearings and safety thermal overload protection. (1) xcept the TD-16 SILNT, that is fitted with the special floating motor system patented by S&P. Additional information The models offer solutions to ventilation problems, especially in places where people work and low sound level is required. (Models 35, 5, 8 and 1) TD-SILNT-T models TD-SILNT versions fitted with a run-ontimer adjustable within 1 and 3 minutes and onespeed motor not suitable for speed control. TD-SILNT - MOD 13 AND 2 Low profile Mixed-flow fans with soundabsorbent insulation. xtremely quiet. ertified of Approval Noise Abatement Society (TD-2 model). onstructed from sheet steel with epoxy polyester paint, acoustic insulation (MO) glass fibre, within outer shell. Aerodynamic inlet to improve airflow and reduce sound. Detachable fan unit without demounting duct connections. IP44. xternal terminal box IP55. Removeable fan body with 2 speed motor, single phase 23V-5/6Hz speed controlable, lass, external rotor aluminium motor with capacitor and thermal protection. Additional information The models offer solutions to ventilation problems, especially in places where people work and low sound level is required. (Model 2) In-Line duct fans TD-SILNT 757
3 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series MOD 25 TO Low profile The low profile of the TD-SILNT fans makes them the most effective solution for installations where space is very limited, especially in ceiling voids. Low noise level Sound waves produced inside the TD, are directed through the perforated inner skin 1 and absorbed by the layer of sound absorbent material 2 asy maintenance i-material support brackets, which in addition to simplifying installation, serve as joint seals. onnection box rotated 36º onnection box can be rotated 36º, to facilitate easy connection of the power cable. Rubber seals i-material inlet and outlet incorporating a rubber seal to facilitate installation and absorb vibrations. Support bracket Support bracket for installing on a wall or ceiling, incorporating twinmaterial support brackets for the motor section that absorbs vibration. asy to mount Loosen and open clamps on both sides. Remove the fan body. Remove the terminal box lid. onnect electrical supply. Remount the fan body by tightening the clamps. Models with Run-On-Timer Models TD-SILNT-T (from models 25 to 1) are fitted with an adjustable timer between 1 and 3 minutes and are supplied with a one-speed motor not suitable for speed control. MODL 16 Silent-elastic-blocks Model TD-16/1N SILNT offer very low noise level, with a motor mounted on silentelasticblocks which absorb the vibrations. 758 In-Line duct fans TD-SILNT
4 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series MOD 13 AND 2 Low profile - compact Low profile fans TD-13/25 SILNT and TD-2/315 SILNT are ideal for installations where space is very limited, especially in ceiling voids. asy maintenance Detachable fan unit for maintenance, or cleaning, without demounting duct connections Low noise level 1 Acoustic insulation (MO) glass fibre. 2 Outer shell. 3 Aerodynamic inlet to improve air flow and reduce sound. 4 Attenuating perforated skin. Support bracket Suitable for wall or ceiling mounting. ixing brackets to the motor-body included. IP55 remote terminal box asy installation and connection. In-Line duct fans TD-SILNT 759
5 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series Technical characteristics TD-SILNT Speed (rpm) Maximum absorbed power (W) Maximum absorbed current (A) Airflow at free discharge (m 3 /h) Maximum operating temperature (º) Sound pressure level* (d(a)) Ø Duct (mm) Weight (kg) Wiring diagram*** (nº) TD-16/1 N SILNT ,16, / ,4 9, 1 TD-25/1 SILNT ,11, / ,4 9, 1 TD-35/125 SILNT ,13, / , 1 TD-5/15-16 SILNT** ,22, / /16 6 9, 1 TD-8/2 SILNT ,45, / ,7 9, 1 TD-1/2 SILNT ,5, / ,7 9, 1 TD-13/25 SILNT ,83, / , 12, 13 TD-2/315 SILNT ,28, / , 12, 13 * Sound pressure level radiated at 3 m at free air conditions with rigid ducts at the inlet and at the outlet. ** It provides an additional rubber gasket for installation in 16 mm ducts. *** See section of Wiring Diagrams. TD-SILNT T (Models TD-SILNT with run-on timer) Speed (rpm) Maximum absorbed power (W) Maximum absorbed current (A) Airflow at free discharge (m 3 /h) Maximum operating temperature (º) Sound pressure level* (d(a)) TD-25/1 SILNT T 22 24, / ,5 TD-35/125 SILNT T 225 3, / TD-5/15-16 SILNT T 25 5, / /16 6 TD-8/2 SILNT T , / ,5 TD-1/2 SILNT T 25 12,5 11-4/ ,5 * Sound pressure level radiated at 3 m at free air conditions with rigid ducts at the inlet and at the outlet. Ø Duct (mm) Weight (kg) 76 In-Line duct fans TD-SILNT
6 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series Dimensions (mm) TD-16/1 N SILNT Ø 4, ,5 Ø 97 Ø 135,5 TD-SILNT 25 to 1 A Ø ØD G H TD-25/ TD-35/ TD-5/15-16* TD-8/ TD-1/ * It provides an additional rubber gasket for installation in 16 mm ducts. Ø 8,5 A D G H G TD-13/25 SILNT TD-2/315 SILNT H Ø 34 51, , Ø 5,4 Ø G ØD H A TD-SILNT 13 and 2 A D In-Line duct fans TD-SILNT 761
7 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series Performance curves qv: Airflow in m 3 /h and m 3 /s. psf: Static pressure in mmwg and Pa. Dry air at 2º and 76 mmhg. Performance data in accordance with ISO 581 and AMA Standards [mmwg] TD-16/1 SILNT Pabs (W) [mmwg] TD-25/1 SILNT q v [m 3 /h] q v [m 3 /s] Pabs (W) q v [m 3 /h] q v [m 3 /s] [mmwg] TD-35/125 SILNT Pabs (W) q v [m 3 /h] q v [m 3 /s] [mmwg] TD-5/15-16 SILNT Pabs (W) q v [m 3 /h] q v [m 3 /s] [mmwg] TD-8/2 SILNT Pabs (W) [mmwg] TD-1/2 SILNT Pabs (W) D A q v [m 3 /h] q v [m 3 /h] q v [m 3 /s] q v [m 3 /s] 762 In-Line duct fans TD-SILNT
8 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series qv [m 3 /h] qv [m 3 /s] Performance curves qv: Airflow in m 3 /h and m 3 /s. psf: Static pressure in mmwg and Pa. Dry air at 2º and 76 mmhg. Performance data in accordance with ISO 581 and AMA Standards [mmwg] TD-13/25 SILNT Pabs (W) [mmwg] TD-2/315 SILNT Pabs (W) qv [m 3 /h] qv [m 3 /h] qv [m 3 /s] qv [m 3 /s] Acoustic characteristics Sound power spectrum: The sound levels shown in these tables are sound power levels at the discharge, radiated and inlet, in d(a) for frequency ranges at points of the curve: (A or D) free discharge, ( or ) medium pressure, ( or ) maximum pressure. () high speed, () low speed. Performance data in accordance with ISO TD-16/1 SILNT LwA LpA* [mmwg] 8 8 Radiated A Pabs 54 (W) 33 A A TD-25/1 SILNT LwA 4 LpA* A A Radiated A qv [m 3 /h] qv [m 54 3 /s] 33 TD-16/1 SILNT LwA LpA* D D Radiated D TD-25/1 SILNT LwA LpA* D D Radiated D TD-35/125 SILNT LwA LpA* A A Radiated A * Sound pressure level radiated at 3 m. in free field condition, with rigid ducts at the inlet and outlet. TD-35/125 SILNT LwA LpA* D D Radiated D In-Line duct fans TD-SILNT 763
9 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series Acoustic characteristics Sound power spectrum: The sound levels shown in these tables are sound power levels at the discharge, radiated and inlet, in d(a) for frequency ranges at points of the curve: (A or D) free discharge, ( or ) medium pressure, ( or ) maximum pressure. () high speed, () low speed. Performance data in accordance with ISO TD-5/15 SILNT LwA LpA* A A Radiated A TD-5/15 SILNT LwA LpA* D D Radiated D TD-8/2 SILNT LwA LpA* A A Radiated A TD-8/2 SILNT LwA LpA* D D Radiated D TD-1/2 SILNT LwA LpA* A A Radiated A TD-1/2 SILNT LwA LpA* D D Radiated D TD-13/25 SILNT LwA LpA* A A Radiated A TD-13/25 SILNT LwA LpA* D D Radiated D TD-2/315 SILNT LwA LpA* A A Radiated A * Sound pressure level radiated at 3 m. in free field condition, with rigid ducts at the inlet and outlet. TD-2/315 SILNT LwA LpA* D D Radiated D In-Line duct fans TD-SILNT
10 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series Practical examples of installing TD SILNT range TD Silent range offers one of the most versatile fan systems on the market today. Due to its flexibility it can be used in a multitude of small or medium fan installations. specially in places where working people and the ventilation system works for many hours, in these cases the sound level becomes an essential element for comfort. In-Line duct fans TD-SILNT 765
11 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series Mounting accessories MA-S Non-return flaps to be installed at the fan discharge. They prevent heat leakages when the extractor is not operating. D A MA-S TD-SILNT* range MA - 25 S 25/1 MA - 35 S 35/125 MA - 5/15 S 5/15 MA - 5/16 S 5/16 MA S 8/2-1/2 MA-S A Ø Ø D MA - 25 S ,5 94,5 MA - 35 S ,5 119,5 MA - 5/15 S , MA - 5/16 S , MA S 131, ,5 MA TD-SILNT* range MA /25 MA - 2 2/315 MA A Ø Ø D MA , MA (*) TD-13/25 SILNT and TD-2/315 SILNT models use non-return flaps MA (see TD Series accessories). MAR-S Rectangular duct adapters enable connection to rectangular ducting. MAR-S TD-SILNT* range Nominal dimensions of the duct L xh (mm) MAR S 25/1-35/ x 14 MAR - 5 S 5/15 28 x 18 MAR S 8/2-1/2 315 x 2 A ø G MAR-S A Ø G MAR S , MAR - 5 S MAR S MAR TD-SILNT* range Nominal dimensions of the duct L xh (mm) MAR /25 4 x 25 MAR - 2 2/315 5 x 315 MAR A Ø G MAR MAR (*) TD-13/25 SILNT and TD-2/315 SILNT models use rectangular duct adapters MAR (see TD Series accessories). MRJ-S Grilles mounted at the inlet or outlet of the fan, to prevent the entry of any foreign objects that could damage the fan. MRJ-S TD-SILNT* range MRJ S 25/1-35/125 MRJ - 5/15-16 S 5/15-5/16 MRJ S 8/2-1/2 MRJ TD-SILNT* range MRJ /25 MRJ - 2 2/315 (*) TD-13/25 SILNT and TD-2/315 SILNT models use grilles MRJ (see TD Series accessories). 766 In-Line duct fans TD-SILNT
12 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series Mounting accessories MP-S low detectors designed to correctly measure pressures at the inlet of series TD devices with airflow straightner. MP-S TD-SILNT* range MP-25 S 25/1 MP-35 S 35/125 MP-5/15 S 5/15-5/16 MP-5/16 S 5/16 MP-8-1 S 8/2-1/2 MP-S A D G H MP-25 S 18 18,7 94, ,5 36,5 15,5 MP-35 S MP-5/15 S MP-5/16 S MP-8-1 S MP TD-SILNT* range MP-1 13/25 MP-2 2/315 MP A D G H MP MP (*) TD-13/25 SILNT and TD-2/315 SILNT models use flow detectors MP (see TD Series accessories). MR-S langes allowing the coupling of TD-Silent fans in series. MR-S Ø of the conduct MR S 125 MR-5 S 15 MR-8-1 S 2 (*) TD-13/25 SILNT and TD-2/315 SILNT models use flange MR (see TD Series accessories). In-Line duct fans TD-SILNT 767
13 IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series lectrical accessories RGUL 2 2 speed switch. R Single phase electronic speed controller. ONTROL OWATT A/4A ontrol element for demand controlled ventilation systems in public, commercial residential buildings it automatically modifies the fan speed to adapt it to the needs defined in the system, measured with sensors. VAPZ lectronic single phase regulator that controls the fan speed with a simple contact (presence detector) or an analogical input, -1 V or 4-2 ma (from 2 probe or relative sensor). SO2-A Ambient 2 and temperature sensor. SO2-AD Ambient 2 and temperature sensor, with display. SHT-AD Ambient 2, temperature and relative humidity with display. PL-S / PL- Presence detector for ceiling mount, sensitive to infrared radiation by bodies in movement, with a 36º detecting angle. Power supply: 1-23 V. TDP-S / TDP-D Presure sensor. nables you to control the pressure in the fan inlet. Presure range: -25 Pa. Output signal: -1V/4-2 ma. RMP Motorised damper, opens proportionately and is controlled by the AS control module. Power supply: 24 VA or 24 VD, depending on the models. 768 In-Line duct fans TD-SILNT
14 MV S.r.l. Via San Giovanni osco, Alessandria - Tel ax Web: -mail: info@mvf.it
TD-SILENT Series (160 to 1000 models)
IN-LINE MIXED LOW DUT ANS ultra-quiet Series (1 to models) Low profile Mixed-flow fans with sound-absorbent insulation. Extremely quiet. ertified of Approval Noise Abatement Society (TD-3, TD-, TD-8 and
More informationTD-SILENT range, the quietest fans in the world in their class
TD-SILNT IN-LIN MIXD LOW DUT NS ULTR-QUIT TD-SILNT Series NW Low profile Mixed-flow fans with sound-absorbent insulation. xtremely quiet. Manufactured in plastic material, with a specifically designed
More informationTD-SILENT range, the quietest fans in the world in their class
IN-LIN MIXD LOW DUT NS ULTR-QUIT Series NW 44682 314 Low profile Mixed-flow fans with sound-absorbent insulation. xtremely quiet. Manufactured in plastic material, with a specifically designed internal
More informationUltra-quiet circular duct fans TD-SILENT ECOWATT Series
TD-SILENT ECOWATT - MODELS 5 to TD-SILENT ECOWATT - MODELS AND At 5% of full speed fan power consumption is reduced by 7% Low profile Mixed-flow fans with sound-absorbent insulation, extremely quiet, fan
More informationMTD Silent Series MIXED FLOW IN-LINE DUCT FAN
MT Silent Series MIX LOW IN-LIN UT N Mixed low In-Line uct an MT Silent Series MT Silent 100/2~200/2 MT Silent 250~315 Low profile Mixed-flow fans with sound- absorbent insulation. xtreme ly quiet. General
More informationVersatility. Features. By installing the SILENT MV, you will never experience the disturbance of noisy ventilation again. Benefits
Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent insulation and manufactured with an adjustable
More informationSILENT MV Ultra Quiet In-line Fans
Ultra Quiet In-line Fans 5 IP44 2 YEAR GUARANTEE Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent
More informationShhhhhhhhhhh! Here there is silence.
TD SILENT RANGE Shhhhhhhhhhh! Here there is silence. New TD Silent range. The world s most quiet fans in its class. TD SILENT range: A leap in time. S&P, a world leader in ventilation, presents the world
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to
More informationTD-ECOWATT AND DECOR-ECOWATT Series
S&P presents its new ranges of domestic and commercial fans with DC motors TD-ECOWATT AND DECOR-ECOWATT Series Up to 55% savings in energy consumption Reduced CO 2 emissions Improvement of the environment
More informationIN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).
More informationIN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
More informationTD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans
IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester
More informationIN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
More informationCENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
More informationIN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
More informationROOF MOUNTED FANS TH-MIXVENT Series Mixed Flow Fans TH-MIXVENT. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
ROOF MOUNTED FNS Series Mixed Flow Fans P P L I T I O N S Workshops ommercial premises Offices Restaurants and cafes Wine cellars asements Range of roof mounted mixed flow fans supplied as standard for
More informationInline Fans Options Featuring TD-MIXVENT/TD-SILENT
Inline Fans Options Featuring TD-MIXVENT/TD-SILENT Featuring Vent Lights and Premium Grilles The World s Leading Producer of Air Movement Products TD_0116 January 2016 Table of Contents Overview TD-MIXVENT
More informationACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans
Hacer título más resumido ACOUSTIC CABINET FANS Centribox CVB-CVT Series, Forward Curved Centrifugal Fans Construction Casing The fan casings are manufactured from heavy gauge galvanised sheet steel and
More informationROOF MOUNTED AXIAL FLOW FANS HCTB / HCTT Series
asy to install Supports to facilitate installation in the roof. XTRACTION (type B) SUPPLY (type A) High quality steel sleeve nsuring the long life of the fan. Range of axial roof fans with horizontal air
More informationMODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN
MODEL FEATURES Exhaust air up to 2,630 CFM with static pressure capabilities to 1 w.g. Mixed flow impeller for excellent air flow to pressure performance ratio Direct connection, two-speed motor Ideal
More informationInline Fans Options Featuring TD-MIXVENT/TD-SILENT
Inline Fans Options Featuring TD-MIXVENT/TD-SILENT Advancing Ventilation Featuring Vent Lights and Premium Grilles The World s Leading Producer of Air Movement Products TD_0218 February 2018 Table of Contents
More informationBATHROOM EXTRACT FANS DECOR-100 Series
DECOR-1 Series Range of axial extractors with airflow rates of 1 m 3 /h, for connection to 1 mm diameter circular ducting. All the fans are manufactured from injection moulded plastic, fitted with neon
More informationEDM Series EDM-80N EDM-80L EDM-100 EDM-200 AXIAL BATHROOM FANS. Bathroom extract fans EDM
AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 0 015982 603071 Installation examples Ceiling or wall mounting Extract ventilation through short duc extract ventilation Extract ventilation
More informationACOUSTIC CABINET FANS CVAB / CVAT Series
Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models
More informationEDM-80N EDM-80L EDM-100 EDM-200. Installation examples. Extract ventilation through short duc
AXIAL BATHROOM FANS EDM Series EDM-80N EDM-80L EDM-100 EDM-200 Ceiling or wall mounting extract ventilation Extract ventilation through wall or using a shunt duct system All V models incorporate all accessories
More informationACOUSTIC CABINET FANS CVB / CVT Series
Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive
More informationBELT DRIVEN CABINET FANS CVTT Series
Range of forward curved belt drive cabinet fans manufactured from galvanised steel sheet, internally lined with melamine thermo-acoustic insulation. ll models incorporate a double inlet low pressure centrifugal
More informationACOUSTIC CABINET FANS CENTRIBOX CVB/CVT. Acoustic cabinet fans. Circular duct connection flanges. Flame retardant IP55 remote terminal box
ACOUSTIC CABINET FANS CENTRIBOX CVB / CVT Series Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All
More informationMODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN
MODEL TD-MIXVENT INLINE MIXED FLOW DUCT FAN MODEL FEATURES Exhaust air up to 2,630 CFM with static pressure capabilities to 1 w.g. Mixed flow impeller for excellent air flow to pressure performance ratio
More informationROOF MOUNTED FANS MIXVENT-TH Series Mixed Flow Fans MIXVENT-TH. Roof mounted fans. Flame retardant terminal box. Circular spigot coupling
MIXVENT-TH ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured from high strength
More informationVENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
More informationHXBR / HXTR Series PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series 0 017982 603075 A P P L I C A T I O N S Range of plate mounted axial fans manufactured from high grade galvanised steel
More informationShort casing. Long casing (L version) Commercial premises
CYLINDRICAL CASED AXIAL FLOW FANS TGT Series Adjustable Pitch Fans Long casing (L version) Short casing A P P L I C A T I O N S Range of adjustable pitch cased axial flow fans. Casings formed from rolled
More informationMIXVENT-TH Series Mixed Flow Fans
ROOF MOUNTED FNS MIXVENT-TH Series Mixed Flow Fans 0 021682 603075 P P L I T I O N S Range of roof mounted mixed flow fans supplied as standard for extract operation. The models 500 and 800 are manufactured
More informationPractical examples of installation in the TD range
Practical examples of installation in the TD range The TD-MIXVENT system offers the most versatile installation range on the market, as a result of its multiple combinations; it can be used in a large
More informationBACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series
Cabinet fans manufactured from galvanised steel sheet with double thickness side panels lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M0). Circular duct connection flange on the
More informationCHVB / CHVT Series. Cabinet fans designed for smoke extraction in fire condition F BACKWARD CURVED CENTRIFUGAL FANS CHVB / CHVT
BACKWARD CURVED CENTRIFUGAL FANS Series The CHVB-CHVT range is suitable for many general ventilation applications where high system resistances are present; i.e. systems with filters, dampers etc. Range
More informationKAT. DOUBLE INLET CENTRIFUGAL FAN with Forward Wheels
KAT DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels KAT Series DOUBLE INLET ENTRIFUGAL FAN with Forward Wheels Kruger Ventilation Industries certifies that the KAT series : version S and - model 9-7 to
More informationVARYCONTROL VAV Dual Duct Terminal Boxes
5/2/B/3 VARYCONTROL VAV Dual Duct Terminal Boxes for variable volume systems Type TVM Trox (U.K.) Ltd Caxton Way GB-Thetford Norfolk IP24 3SQ Telephone +44 (0)1842 754545 Telefax +44 (0)1842 7051 www.troxuk.co.uk
More informationCENTRIFUGAL DIRECT DRIVE FANS CMT-CMB
CENTRIFUGAL DIRECT DRIVE FANS CMT-CMB Applications The CMT-CMB range of fans are suitable for many general and OEM ventilation applications where the extract of nonhazardous heated air is required. The
More informationCONFIGURABLE HIGH-EFFICIENCY HEAT RECOVERY UNITS CADB/T-HE PRO-REG Series
False-ceiling models CADB/T-HE 4 to 33 Heat Recovery Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised
More informationCVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
More informationCONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
More informationseries RVV Variable flow rate controllers
series RVV Variable flow rate controllers www.koolair.com Series RVV 1 CONTENTS Variable flow rate controllers, type RVV Description 2 Dimensions and product code 3 Selection tables 4 Variable flow rate
More informationplates and with flexible conduit. Ø Outlet (mm)
SELF-ADJUSTING VALVES BAR ALIZE Self-adjusting exhaust valves Wide range of self-adjusting exhaust valves, manufactured from injection moulded white polystyrene. Designed for kitchen, bathrooms and toilet
More informationBSB SINGLE INLET CENTRIFUGAL FAN with Backward Wheels
BSB SINGE INET ENTRIUGA AN with Backward heels BSB Series SINGE INET ENTRIUGA AN with Backward heels Kruger Ventilation Industries certifies that the BSB series shown herein is licensed to bear the AMA
More informationCommercial Fans & Dampers
ommercial Fans & Dampers AX IN-LIN FANS Heavy gauge, drawn steel housing with baked epoxy finish 120V operation, other voltages available asy to install - mounting brackets included May be mounted in any
More informationDIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
More informationNEW Acoustic In-Line Fans (ACQ)
NEW Acoustic In-Line Fans (ACQ) Acoustically treated housing, Class O rated, sandwich construction selected for maximum noise absorption Motors protected to IP44 Motor insulation Class B Maximum operating
More informationINDEX. SUPER VENT By Beta Industrial. pages INTRODUCTION CONSTRUCTION PERFORMANCE CHART ACOUSTIC DATA CHART DIMENSION SHEET - SINGLE CABINET FANS
Cabinet Fan SV-1 INDEX INTRODUCTION CONSTRUCTION PERFORMANCE CHART ACOUSTIC DATA CHART pages 01 02 03 04 DIMENSION SHEET - SINGLE CABINET FANS DIMENSION SHEET - TWIN CABINET FANS PERFORMANCE GRAPH WIRING
More informationAir Flow Solutions. Commercial Fans Offices, retail, leisure, education
Air Flow Solutions ommercial Fans Offices, retail, leisure, education ommercial Fans Why Ventilate? AIRF'S extensive range of extract fans are not just for domestic dwellings. Their outstanding performance,
More informationMegaBox Product-specific information
MegaBox Product-specific information Application Noise-encapsulating centrifugal fans with retractable motor impeller unit and motor located outside the air flow Suitable for rough operating conditions
More informationTHB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser
Halton THB Perforated Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation either directly to ductwork or balancing plenum Detachable front panel enables the cleaning of the diffuser
More informationCBM Small Series LOW PRESSURE CENTRIFUGAL FANS. CBM Small. Low pressure centrifugal fans. Impeller dynamically balanced.
LOW PRESSURE CENTRIFUGAL FANS CBM Small Series Range of single and double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel and protected against corrosion by a
More informationThe Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
More informationCircular Silencer. Rigid and flexible construction Type CA CB CF CS. TROX GmbH Telephone +49/28 45/ Telefax +49/28 45/
6/5/EN/6 Circular Silencer Rigid and flexible construction Type CA CB CF CS TROX GmbH Telephone +49/28 45/2 02-0 Telefax +49/28 45/2 02-2 65 Heinrich-Trox-Platz e-mail trox@trox.de D-47504 Neukirchen-Vluyn
More informationASA. SINGLE INLET CENTRIFUGAL FAN with Airfoil Wheels
ASA SINGE INET ENTRIUGA AN with Airfoil heels ASA Series SINGE INET ENTRIUGA AN with Airfoil heels Kruger Ventilation Industries certifies that the ASA series shown herein is licensed to bear the AMA Seal.
More informationACOUSTIC CABINET FANS FOR SUPPLY AIR APPLICATIONS CAIB/T PRO-REG Series
ACOUSTIC CABINET FANS FOR SULY AIR ALICATIONS CAIB/T RO-REG Series Introduction of fresh air to commercial offices and industrial kitchens. Acoustic cabinet fan in galvanised sheet steel with reinforced
More informationI Fan Powered Terminal Unit
I Fan Powered Terminal Unit VARIABLE VOLUME PARALLEL FLOW Fan Powered Terminal Unit Variable volume parallel flow Product Overview Variable Volume/Parallel Flow Fan Powered Terminal Units Honeywell parallel
More informationROOF MOUNTED FANS MAX-TEMP Series, Centrifugal 400 ºC/2h Rated Fans
ROOF MOUNTD FANS MAX-TMP Series, entrifugal 400 º/2h Rated Fans Description - Applications The MAX-Temp range of roof extract fans are available in horizontal (TH-THT) or vertical (TV-TVT) discharge formats,
More informationCMRT Series BACKWARD CURVED CENTRIFUGAL FANS. Backward curved centrifugal fans CMRT 80 C
BACKWARD CURVED CENTRIFUGAL FANS CMRT Series 80 C Continuous operation Range of single inlet direct drive centrifugal fans designed for continuous extraction of air stream up to 80ºC. Casings are manufactured
More informationTHT/HATCH THT/HATCH. Order code THT/HATCH 40 2T 1 N 1 G
THT/HATCH High-powered ventilators with motorised opening and equipped with a roof fan, for smoke extraction in the event of a fire, 400ºC/2h High-powered ventilators with roof fan and motorised opening.
More informationCBM Series LOW PRESSURE CENTRIFUGAL FANS CBM. Low pressure centrifugal fans. Impeller dynamically balanced. Anti-vibration mounts
LOW PRESSURE CENTRIFUGAL FANS Series Range of double inlet direct driven low pressure centrifugal fans manufactured from galvanised sheet steel. All the models are fitted with forward curved centrifugal
More informationHIGH-POWERED VENTILATORS
HIGH-POWERED VENTILATORS WITH ROOF FANS 400ºC/2h The THT/HATCH series was designed using high-powered ventilator technology for smoke extraction in the event of a fire, and is equipped with THT series
More informationCircular silencers. Type CA. For the reduction of noise in circular ducts, galvanised sheet steel construction. 02/2017 DE/en PD CA 1
X X testregistrierung Circular silencers Type For the reduction of noise in circular ducts, galvanised sheet steel construction Circular silencers Type for the reduction of noise in the circular ducts
More informationsupplied in Form (B) configuration. Airflow over Impeller- Motor.
CYLINDRICAL CASED AXIAL FLOW FANS COMPACT Series TCBB-TCBT (Aluminium impellers) and TCFB-TCFT (Plastic impellers) NEW VERSIONS Description The S&P Cylindrical Cased Axial Fans feature, as the name suggests,
More informationCAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power
CAS CAS: High pressure, single inlet centrifugal fans with sheet steel casing and impeller : High pressure, single inlet centrifugal fans with sheet steel casing and impeller, fitted with acoustic attenuators
More informationNEW Slimpak EC Box Fan (SLPT EC)
NEW Slimpak EC Box Fan (SLPT EC) Compact low profile design Duct Sizes 100 500mm Performance - Airflow 0.01 to 1.2m 3 /s, Pressure up to 650Pa Latest energy saving EC/DC motors Internal mounting IPX2 Manufactured
More informationPlate mounted axial flow fans HXBR / HXTR Series
Plate mounted axial flow fans manufactured from high grade galvanised steel and provided with a Sickle blade impeller, low sound level, protected against corrosion by cataforesis primer and a polyester
More informationEco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors
Eco Mixed Flow (emf) High efficiency Mixed Flow Fan with guide vanes Available in sizes 355 to 710mm dia. IP54 Fan rating (duct mounted) Operating temperatures up to 80 C (see technical specification)
More informationPLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series. Plate mounted axial flow fans HXBR/HXTR. Corrosion resistance
A P P L I C A T I O N S PLATE MOUNTED SICKLE BLADE AXIAL FANS WITH EXTERNAL ROTOR MOTOR HXBR / HXTR Series Range of plate mounted axial fans manufactured from high grade galvanised steel and provided with
More informationVKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.
Application Features Power supply Circular duct fans are used in low-to medium-pressure ducted systems. Fans are suitable for air supply or exhaust of residential buildings, warehouses, bathrooms, lavatories,
More informationFAN POWERED TERMINAL UNITS
Benefits: Fan powered terminals are typically used for heating and cooling of perimeter zones. Operating cost savings can be achieved through the use of waste heat recovery from the ceiling plenum and
More informationMAJOR 2 NCH. Ductable units. High pressure and high capacity ductable units RANGE NCH Y NCH NCH I COADIS COMBI. Motor optional
Y + U I COADIS COMBI High pressure and high ductable units Motor optional is a non independent air conditioning terminal unit for heating and cooling offices and hotels. With reduced dimensions and designed
More informationCircular Duct Fan prioair
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Tunnel Fans Circular Duct Fan prioair More performance. Less energy consumption. The new EC circular duct
More informationRegulation and shut-off damper SPB and SPC
SPB / SP -type multi leaf damper is a robust and reliable regulation and shut-off device to be used for different purposes in air handling systems. SPB SP.01.13 Area of application Multi leaf dampers are
More informationCMB / CMT Series CENTRIFUGAL SINGLE INLET FANS. Centrifugal direct drive fans CMB/CMT 80 C. Impeller dynamically balanced
CENTRIFUGAL SINGLE INLET FANS CMB / CMT Series 80 C CONTINUOUS operation Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC (Series 1) or 150ºC
More informationBPF. Centrifugal Plug Fans
BPF Centrifugal Plug Fans Introduction INTRODUCTION Plug Fans S&P - THE COMPANY Soler & Palau was founded in 1951 in Ripoll (Spain) and since this date has become one of the world s leading companies engaged
More informationCircular silencers. Type CS. For the reduction of noise in circular ducts, aluminium construction PD CS 1. 02/2017 DE/en
X X testregistrierung Circular silencers Type For the reduction of noise in circular ducts, aluminium construction Circular silencers, in rigid aluminium construction, for the reduction of noise in the
More informationTechnical brochure. LTG Fans. Tangential fans Type GA 25 / TA 40. Impeller diameter 25 mm / 40 mm.
Technical brochure LTG Fans Tangential fans Type GA 25 / TA 40 Impeller diameter 25 mm / 40 mm www.ltg.net LTG Process Air Technology LTG Fans LTG Filtration Technology LTG Humidification Technology Content
More informationDFB - Conical Ceiling Diffuser. Halton DFB. Conical Ceiling Diffuser
Halton DFB Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket All sizes
More informationITEC High Efficiency EC Twin Fan for convenient fitting and full control. Casing constructed from 1.6mm Galvanised sheet steel
ITEC High Efficiency EC Twin Fan for convenient fitting and full control Casing constructed from 1.6mm Galvanised sheet steel Circular spigot connection Inline for ease of fitting into duct system Single
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationDFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser
Halton DFA Conical Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation flush to the ceiling, light-weight aluminium design Circular duct connection with rubber gasket Openable
More informationTBV - Terminal Unit. Halton TBV. Terminal Unit
Halton TBV Terminal Unit Horizontal air supply, suitable also for exhaust Integrated rectangular balancing plenum with measurement and adjustment functions Effective sound attenuation Circular duct connection
More informationGigaBox centrifugal fans Product specific information
GigaBox centrifugal fans Product specific information GigaBox and accessories Wall bracket GB-WK (ccessories) Outdoor cover hood GB-WSD (ccessories) Included in delivery: a) Flexible sleeve b) Outlet spigot,
More informationseries Silencers
series SK Silencers www.koolair.com Series SK 1 Silencers CONTENTS ASK-1 and ASK-2 Round Silencers Description 4 ASK-1 Overall Dimensions 5 ASK-2 Overall Dimensions 6 Selection Table and Weights 7 ASK-1
More informationAHN 064 to 304 EHN/CHN 064 to 304
u Horizontal Packaged and Split Air Conditioners AHN 64 to 34 EHN/CHN 64 to 34 6. to 29.2 kw 6.4 to 29.4 kw Engineering Data Manual EDM AECHN-A.1GB Date : June 28 Supersedes : None Technical Description
More informationTechnical documentation
VM-PRO Mechanical volumetric flow control- Table of Contents Areas of application... 2 Useable volumetric flow ranges... 2 Function... 3 Processing... 3 Available sizes / -dimensions... 4 Accessories list
More informationUTA STANDARD. Ductable units. Range. Air handling unit with high available static pressure. NEW Eco-Design Filter. V3000 control Fresh air management
Ductable units NEW Eco-Design Filter Air handling unit with high available static pressure V3000 control Fresh air management The range of air handling units is designed for suspended ceiling heating and
More informationVAV terminal units. Type TVM. For dual duct systems PD TVM 1
X X testregistrierung VAV terminal units Type Variant -S Rectangular connection on the room end For dual duct systems VAV dual duct terminal units for dual duct systems with variable volume flows in buildings
More informationType CS FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, ALUMINIUM CONSTRUCTION
Homepage > Products > Sound attenuators > Circular silencers > Type CS Type CS FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, ALUMINIUM CONSTRUCTION Circular silencers, in rigid aluminium construction,
More informationContent - Silencers. Silencers for spiral systems. Silencers for rectangular systems
Silencer Catalog Content - Silencers General information on noise... 3 General information on sound attenuation... 4 Silencer specification... 7 2 Silencers for spiral systems Silencers for rectangular
More informationTwin and Single Inline Fans. Offers a range of flexible installation and application options, including auto-changeover on the Twin range
Twin and Single Inline Fans Offers a range of flexible installation and application options, including auto-changeover on the Twin range 2 Version 3.1 Breathing Buildings Inline Box Fans Demand Control
More informationAIR VENT T E C H N O L O G Y. infinity. energy efficient - environmentally friendly - economical EC MOTORS - direct drive - CuSTOM built ErP Compliant
infinity AIR VENT T E C H N O L O G Y energy efficient - environmentally friendly - economical EC MOTORS - direct drive - CuSTOM built ErP Compliant INDEX Selection Chart Page 3 Internal & External Acoustic
More information400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet
THT/ROOF ROOF-MOUNTED SMOKE EXTRACTOR FANS THT/ROOF 400ºC/2h and 300ºC/2h roof-mounted helical extractor fans with vertical air outlet Roof-mounted helical extractor fans with vertical air outlet, for
More informationCODE MODEL 1RC9020 REC PRO 90 S RC9021 REC PRO 90 S RC9022 REC PRO 90 S RC9023 REC PRO 90 S
REC PRO 9S High efficiency Heat Recovery Units Non residential applications EFFICIENCY 9% Comply with ErP Directive 125/29/CE and EU Regulation 1253/214. Classification: Non Residential Ventilation Unit
More informationCADENZA. Sound attenuator with tapered acoustic baffles for rectangular ducts QUICK FACTS
Sound attenuator with tapered acoustic baffles for rectangular ducts QUICK FACTS Rectangular sound attenuator with connection to the outer casing, which also enables flange connection Excellent aerodynamic
More informationSquare Mixed Flow Fans (MFQ)
Square Mixed Flow Fans (MFQ) Features and Benefits Motors protected to IP44 Motor insulation Class B Maximum operating temperature +40 C Standard Thermal Overload Protection Sizes 400 to 500 3 phase are
More information