Demolition Tools TT DEMO CAT TEMP 03 REPRO SPLIT PAGES.indd 1 06/08/ :25

Transcription

1 Demolition Tools

2

3 Demolition Tools Introduction Our manufacturing experience on Demolition Tools covers a period of over thirty years, throughout which we have continued to develop high quality tools for an ever-demanding marketplace. Thomas Turton has one quality - the best. All tools are totally manufactured and processed within our modern factory, utilising the very latest machinery and technology, which ensures that our finished products comply with the high standards of quality expected by our customers worldwide. We operate a Quality Management System which is certified to BS EN ISO9001:2008 standard. Our Demolition Tools are manufactured from specially selected steel specifications which have been evolved from a rigorous research and development programme. We continually investigate refinements to specifications and processes, to ensure that our quality leads the market. Our in-house Heat Treatment Plant is one of the largest of its kind in Europe and enables us to closely control and monitor all aspects of the unique processes we have developed. The result is a range of quality Demolition Tools that have the hardness, impact strength and durability required to combat the most arduous conditions experienced in demolition, trenching, road construction, quarrying and mining applications. Our Demolition Tools are acknowledged by many major OEMs as the best independently produced tools available worldwide. One quality - the best. Contents Page Page Introduction 1 Krupp Warranty 2 Montabert Tools Selection 2 MSB Care and Use 3 NPK Catalogue Numbering System 4 Rammer Chisel Orientation 4 Rotair 53 Machine Index 5 Socomec Hammer Type & Tool Reference Index 6-12 Soosan Atlas Copco Toku Furukawa Toyo Hanwoo Other Manufacturers Reference Index Indeco Warranty Guide Italdem 28-30

4 Warranty Thomas Padley & Turton s Venables tools tools are are guaranteed against against defects defects in raw in raw material material and and manufacture. No other No other warranty is implied or expressed. The company s liability in respect of any warranty claims is limited to replacement and does not extend to any other expenditure incurred or to any consequential damage. Warranty claims are subject to immediate notification of any problems and return of the goods to P&V us under our their returned goods system. See pages & & for for our our full full warranty details. Tools Selection Correct selection of tools is the first step in obtaining maximum life from the product. Conical Point - for general demolition work where penetrative breaking is required. Wide Chisels - for increased productivity in softer materials. Tarmac Cutters - as Wide Chisels but with 90 degree orientation for cuttting/trenching. Pyramid Points - for use where increased breakout forces are required Rail Guard - for driving in rail guards. X Type Point - for use in soft or high dust operations. Blunts - for impact breaking, eg. secondary breaking and also scaling in mines and tunnels, etc. Power Point - tool with hard core for use in very hard and abrasive conditions. Upset Blunt - Blunt with increased diameter at working end to give increased life and wear resistance. Chisels - as for Points but also where a cutting action is required, eg. trenching and benching Rammer Stems & Pads - for compacting loose ground. Note: Chisels give higher wear rates and stress levels in the retainer flat areas of the tool. Grooved Chisel - for use in soft or high dust operations. Driving Tool - for driving in posts, pipes etc. 2

5 Care and Use Working Angle Critical to tool life is using the tool at the correct working angle of 90 to the working surface. Failure to do this will result in high contact pressure between the tool and the bushings and the likelihood of galling between the surfaces. In turn this can lead to premature failure of the tool plus damage and rapid wear to the bushings. Worn bushings can allow the tool to be angled over to a position where the striking face is hit at an angle by the piston. Lubrication Lubrication of the tool/bushing with the correct quality high temperature/high pressure grease at regular intervals is essential. Such greases are best able to cope with the extreme contact pressures generated by an incorrect working angle, leverage and excessive bending etc. USE OF CHEAP SUBSTITUTES (OR NO GREASE AT ALL) IS FALSE ECONOMY AND WILL RESULT IN PREMATURE TOOL FAILURE. Blank Firing Continuing to use the hammer when the tool is not or only partially in contact with the work surface will result in the tool being fired down on to the retainer pin. This will cause heavy wear and damage to the upper retainer flat radius area and the retaining pin itself. Tools should be examined regularly, eg. every 40 hours for damage in this area which should then be ground out. At the same time as the tool is examined the opportunity should be taken to check the tool bushings for wear and damage with a view to replacement or reconditioning as necessary. Overheating Avoid continuous working in one position. Do not strike in one spot for more than seconds before changing the tool to another position. Failure to do this can lead to excessive heat build-up at the working end with mushrooming as a consequence. Leverage/Bending Using the tool as a lever to help break the ground is a common tool breaker. Avoid leverage and excessive bending at all times. Loose running Keep the boom and hammer feed sufficient to ensure that the tool is held against the hammer shoulder stop, at all times when working. Tool Reconditioning Under most normal conditions the tool will not need reconditioning. However, tools that have lost their shape on the working end can cause high stresses throughout the tool and hammer. Reconditioning by milling or turning is recommended. Welding or flame cutting is not recommended as the heat generated could cause structural changes within the material which in turn can lead to premature failure or rapid wear. 3

6 Catalogue Numbering System All catalogue numbers start with the 2 letters, D, followed by a 23 digit number, which is is the our P&V designation for the hammer type, eg. eg. D P. MB35P0410. The second section defines the the tool tool length and and type, type, eg.d p. MB35P0410. The The first last 4 digits 4 digits eg eg represent the tool length in in millimetres, whilst the the working end end configuration is defined is defined by a by letter: a letter: P = = Point (Conical) WC = Wide Chisel, followed by by blade width, width, eg. eg. D WC-120 MB35WC041R120 C = = Chisel TC = Tarmac Cutter (in-line wide chisel) eg. eg. D TC-120 MB35TC041R120 B = = Blunt Blunt PP = Pyramid Point XP = X point XP X point GC = grooved chisel GC grooved chisel BU = blunt upset CT BU = Power blunt upset Point CT = Power Point For correct selection of tool types see page 2 Note: For special tools such as Railguards, Rammer Stem & Pads and Driving Tools, please contact our sales office. Chisel Orientation Transverse (East/West) have the blade of the tool transverse to the axis of the carrier boom when mounted. In-Line (North/South) have the chisel tool blade In-Line (parallel) to the axis of the carrier boom. All standard chisels and wide chisels have the blade in the transverse mode. All in-line chisels and tarmac cutters have the blade in the in-line mode. 4

7 Machine Index Machine Fig. Page Machine. Fig. Page ARDEN 65 ARROWHEAD 46, 65 ATLAS COPCO BERCO 13 BOBCAT 65 CASE CATERPILLAR CHICAGO PNEUMATIC 13, 16-17, DAEMO 65 D&A 65 DEHACO DRAGO EURORAM FURUKAWA GEHL 53 HANWOO HUSKIE/IZUMI 65 IDROMECCANICA 35 INDECO ITALDEM JCB JKHB KRUPP KUBOTA 48 LIFTON 65 MONTABERT MSB NPK OCM O&K OKADA 66 OMAL 35, 53 OMD 35 PEL-JOB 53 PROMOVE RAER ROTAIR 53 SOCOMEC SOOSAN STANLEY 56-58, 66 STAR 28-29, TABE 66 TAKEUCHI TELEDYNE TOKU TOPA 66 TOYO VIBRARAM 66 VOLVO WIER

8 Hammer Type & Tool Reference Index Machine Fig. Page Machine Fig. Ref. Page ARDEN AB AB150/ AB280/ AB AB ARROWHEAD S S S S T T T T T ATLAS COPCO PB PB PB PB PB SB50,SBC SB100,SBC SB150,SBC SB200,SBC SB300,SBC 610,SBC SB300 SCALER SB450,SBC 800/ MB MB700, MB MB MB MB HB HB HB HB HB HBC 1100/ HBC HBC HBC TEX 30H 6 13 TEX 75H/100H 7 14 TEX 110H 8 14 TEX 180H 9 14 TEX 250H TEX 250H SCALER TEX 400H TEX 600H/700H/900H ATLAS COPCO - cont. TEX 1400H TEX 1800H/2000H BERCO BB BB BB BB BB BOBCAT B B B B850/B /2570/ CASE CB CB CB CB CB CB CB CB CB CB CB CATERPILLAR CAT H45FT CAT H50FT CAT H63/H63FT CAT H70/H70FT CAT H90/H90FT CAT H100/H100FT CAT H115s CAT H120s CAT H130s CAT H140As CAT H140Cs/H140Ds CAT H160As CAT H160Cs/H160Ds CAT H180s CAT H180Ds CAT H

9 Hammer Type & Tool Reference Index Machine Fig. Page Machine Fig. Page CHICAGO PNEUMATIC (CP) CP CP CP CP CP CP CP CP CP CP CP CP DAEMO DMB S DMB S DMB S DMB S DMB S DMB S D&A 8V V/20V V/50V V V V DEHACO DHB DHB DHB DHB DHB DHB DHB DHB DHB DHB 1605 (1405) DHB DHB 3205 (4105) DRAGO DRH DRH DRH DRH DRH DRH650S/ DRH1150S/1600S DRH EURORAM RM RM RM RM RM EURORAM - contd. RM RM85/ RM RM RM RM RM RM RM RM RM RM FURUKAWA F F F F F F F F F F F F F F HB1G HB2G HB3G HB5G HB8G HB10G HB15G HB20G HB30G HB40G HANWOO RHB 301-V RHB 302/303-V RHB RHB 305-V RHB 308-2/ RHB 313-V RHB 322-2/ RHB 328-2/ RHB HUSKIE/IZUMI HH HH HH HH HH HH HH

10 Hammer Type & Tool Reference Index Machine Fig. Page Machine Fig. Fig. Page HUSKIE/IZUMI - contd. HH HH IDROMECCANICA IMI IMI IMI IMI INDECO HB HB HB HB HB HP HP HP HP HP HP HP HP HP HP HP HP HP HP HP HP HP HP MES 121/ MES 180/181/ MES 300/301/350/ MES 451/452/462/521/ MES MES 601/621/ MES MES MES 1750/ MES MES MES MES MES MES MES MES UP121/150P UP181/200P UP301/350P/351P UP462/521/550P UP UP621/650P INDECO - contd. UP UP UP UP UP UP UP UP UP UP UP UP ITALDEM GK 85/ GK 160/ GK GK 290/ GK 360/ GK 600/ GK 950/ GK GK1351S GK GK GK 3400/ GK K K K K K K JCB JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JCB HM JKHB JKHB JKHB JKHB JKHB JKHB JKHB JKHB

11 Hammer Type & Tool Reference Index Machine Fig. Fig. Page Machine Fig. Page JKHB - contd. JKHB JKHB JKHB JKHB JKHB KRUPP AT AT AT AT AT HM50/ HM60V HM60/ HM85/90/90V HM130/140V HM185/190V HM HM220/ HM300/301/ HM350/350V HM550/560V HM HM600/ HM HM700/701/702/ HM710/ HM HM950/ HM HM1500MV HM2000MV HM2100/ HM2500MV/ HM HM KUBOTA KXB 300/ KXB 400/BTB KXB KXB KXB LIFTON LH70/ LH LH LH LH LH MONTABERT BRH BRH76/ BRH BRH250/ MONTABERT - contd. BRH501/ BRH BRH BRH /50SMS /70SMS /85SMS/90/90SMS SX /140SMS/150/150SMS /300MS /700SMS /900MS /1200SMS SILVER CLIP 08 (SC08) SILVER CLIP 12 (SC12) SILVER CLIP 16 (SC16) SILVER CLIP 22 (SC22) SILVER CLIP 28 (SC28) V32/V32SMS V V MSB MS MS MS MS MS MS MS600(NEW) MS MS MS SAGA SAGA SAGA NPK E E E E E E E E E E E-208A E E E E E E-240A

12 Hammer Type & Tool Reference Index Machine Fig. Page Machine Fig. Page NPK - contd. GH H-06X H-08XA H-1XA H-2XA/E H-3XA/E H-4X H-6XA H-7XA H-8XA H-10XB/E H-12X/E OCM OCM OCM OCM OCM OCM O&K H H H H H H H H H H H H OKADA OKB/UB OKB/UB 301SL OKB/UB OKB/UB 302A OKB/UB 303A OKB/UB OKB/UB 304B OKB/UB OKB/UB OKB/UB OKB/UB 312B OKB/UB OKB/UB UB UB UB UB UB UB UB17/OKB17A OMAL OMAL OMAL 80S OMAL OMAL OMAL OMD OMD OMD OMD OMD PEL-JOB MH MH MH130/ MH180/ PROMOVE P PMV90/P3SH PMV290/390/P12SH PMV690/P16SH PMV1000/P23SH PMV1390/P27SH RAER S18/PICCOLO S S S S S S S S S S S S S S S E E E E E G G G G G G M M

13 Hammer Type & Tool Reference Index Machine Fig. Page Machine Fig. Page ROTAIR OL OL90 (WITH COLLAR) OL 90/ OL 130/ OL 180/ OL 250/ SOCOMEC DMS DMS DMS DMS DMS DMS DMS MD MD MD MD SOOSAN SB SB SB SB SB SB SB SB SB SB SB SB130/ SB STANLEY MB MB MB 250/256/350/ MB MB MB 656/675/ MB 800/ MB MB 1950/ MB 2950/ MB MB20EX MB30EX MB40EX MB50EX MB70EX MB80EX MB100EX STAR SH SH SH SH SH SH SH SH SH SH SH SH SH TABE AGB 100/175/ AGB 270/275/350/ AGB 400/ AGB 700/701/ AGB 1000/1300/ AGB 1600/ AGB TAKEUCHI TKB TKB TKB TKB TKB TKB TKB TKB TKB TKB TKB TKB TKB TELEDYNE TB TB120/ TB180/ TB220/ TB TB400/425 / TB700/725/750/ TB TB900/925/975/1000/ TB TB1300/ TB TB1825/ TB TB

14 Hammer Type & Tool Reference Index Machine Fig. Page Machine Fig. Page TOKU TNB 08E/1M TNB 1E/2M TNB 2E/3M TNB 3E/4M TNB 4E/5M TNB 6E/7M TNB 7E/10E TNB 14E/16E TNB 22E/23E TNB 30E/31E TNB TNB TNB TNB TNB TNB TOPA TOPA TOPA TOPA TOPA TOPA TOPA TOPA TOPA TOYO THBB THBB THBB THBB THBB THBB THBB THBB THBB THBB THBB THBB THBB VIBRARAM VRH VRH VRH VRH VRH VRH VRH VOLVO HB HB HB HB HB HB HB HB HB HB HB HB HB WIER W W W W W W W ADDENDUM GEHL G50S G95S G160S G260S G330S

15 ATLAS COPCO 1 Atlas Copco PB110 Berco BB42, Chicago Pneumatic CP100, Krupp AT Point 470 D P KR41P Chisel 470 D C KR41C ø42 2 Atlas Copco PB160 Berco BB52, Chicago Pneumatic CP150, Krupp AT Point 600 D P KR42P Chisel 600 D C KR42C ø52 3 Atlas Copco PB210 Berco BB62, Chicago Pneumatic CP200, Krupp AT Point 700 D P KR43P Chisel 700 D C KR43C ø62 4 Atlas Copco PB310 Berco BB70, Chicago Pneumatic CP300, Krupp AT Point 750 D P KR44P Chisel 750 D C KR44C ø70 5 Atlas Copco PB420 Berco BB80, Chicago Pneumatic CP400/550, Krupp AT220, HM220/ Point 900 D P KR34P Chisel 900 D C KR34C ø80 6 Atlas Copco SB50 Atlas Copco SBC60, Tex30H 166 Point 430 D P AC21P Chisel 430 D C AC21C ø48 21 ø32 ø32 13

16 ATLAS COPCO 7 Atlas Copco SB100 Atlas Copco SBC115, TEX75H / 100H ø60 Point 550 D P AC10PO550 5 Chisel 550 D C AC10C ø45 ø45 8 Atlas Copco SB150 Atlas Copco SBC255, TEX110H Point 550 D P AC17PO550 7 Chisel 550 D C AC17C ø50 9 Atlas Copco SB200 Atlas Copco SBC410, TEX180H Point 600 D P AC18P Chisel 600 D C AC18C ø65 10 Atlas Copco SB300 Atlas Copco SBC610, SBC Point 800 D P AC22P Chisel 800 D C AC22C Blunt 800 D B ø80 11 Atlas Copco SB300 Scaler 375 Blunt 800 D B AC23B ø99 57 ø80 ø79 12 Atlas Copco Tex 250H Point 800 D P AC12P Chisel 800 D C AC12C ø80 14

17 ATLAS COPCO 13 Atlas Copco Tex 250H Scaler ø98 Blunt 800 D B AC19B ø80 ø80 14 Atlas Copco SB450 Atlas Copco SBC800/850, Tex 400H Point 840 D P AC20P Chisel 840 D C AC20C Blunt 840 D B ø95 15 Atlas Copco HBC1100/1700 Atlas Copco Tex 600H, 700H, 900H Point 900 D P AC14P Chisel 900 D C AC14C Blunt 900 D B AC14B ø Atlas Copco HBC2500 Atlas Copco Tex 1400H Point 1000 D P AC15P Chisel 1000 D C AC15C Blunt 1000 D B AC15B ø Atlas Copco HBC4000 Atlas Copco Tex 1800H/2000H Point 1100 D P AC16P Chisel 1100 D C AC16C Blunt 1100 D B AC16B ø Atlas Copco HBC Point 1500 D P AC23P Chisel 1500 D C AC23C Blunt 1500 D B AC23B ø170 15

18 ATLAS COPCO 19 Atlas Copco MB500 Krupp HM Point 900 D P KR32P Chisel 900 D C KR32C ø90 20 Atlas Copco MB700/MB800 Krupp HM580, Chicago Pneumatic CP Point 1000 D P KR38P Chisel 1000 D C KR38C Blunt 1000 D B KR38B ø Atlas Copco MB1000 Krupp HM Point 1050 D P AC24P Chisel 1050 D C AC24C Blunt 1050 D B AC24B ø Atlas Copco MB1200 Krupp HM Point 1150 D P KR39P Chisel 1150 D C KR39C Blunt 1150 D B KR39B ø Atlas Copco MB1700 Krupp HM Point 1200 D P KR37P Chisel 1200 D C KR37C Blunt 1200 D B KR37B ø Atlas Copco HB2200 Krupp HM1500, Chicago Pneumatic CP Point 1300 D P KR28P Chisel 1300 D C KR28C Blunt 1300 D B KR28B ø150 16

19 ATLAS COPCO 25 Atlas Copco HB3000 Krupp HM2300, Chicago Pneumatic CP Point 1500 D P KR40P Chisel 1500 D C KR40C Blunt 1500 D B KR40B ø Atlas Copco HB4200 Krupp HM2600, Chicago Pneumatic CP Point 1500 D P KR30P Chisel 1500 D C KR30C Blunt 1500 D B KR30B ø Atlas Copco HB5800 Krupp HM Point 1700 D P KR46P Chisel 1700 D C KR46C Blunt 1700 D B KR46B ø Atlas Copco HB7000 Krupp HM Point 1800 D P KR33P Chisel 1800 D C KR33C Blunt 1800 D B KR33B ø210 17

20 FURUKAWA 29 Furukawa F1/HB1G Point 400 D P FU21P Chisel 400 D C FU21C ø36 30 Furukawa F2/HB2G Point 450 D P FU22P Chisel 450 D C FU22C ø45 31 Furukawa F Point 525 D P FU32P Chisel 525 D C FU32C ø52 32 Furukawa F Point 560 D P FU33P Chisel 560 D C FU33C ø60 33 Furukawa F Point 600 D P FU34P Chisel 600 D C FU34C ø68 34 Furukawa F Point 730 D P FU35P Chisel 730 D C FU35C073H ø75 18

21 FURUKAWA 35 Furukawa F Point 850 D P FU37P Chisel 850 D C FU37C ø90 36 Furukawa F Point 1100 D P FU38P Chisel 1100 D C FU38C Blunt 1100 D B FU38B ø Furukawa F Point 1200 D P FU39P Chisel 1200 D C FU39C Blunt 1200 D B FU39B ø Furukawa F Point 1250 D P FU40P Chisel 1250 D C FU40C Blunt 1250 D B FU40B ø Furukawa F Point 1300 D P FU41P Chisel 1300 D C FU41C Blunt 1300 D B FU41B ø Furukawa F Point 1400 D P FU42P Chisel 1400 D C FU42C Blunt 1400 D B FU42B ø150 19

22 FURUKAWA 41 Furukawa F Point 1500 D P FU43P Chisel 1500 D C FU43C Blunt 1500 D B FU43B ø Furukawa F Point 1600 D P FU44P Chisel 1600 D C FU44C Blunt 1600 D B FU44B ø Furukawa HB1G/ F Point 400 D P FU21P Chisel 400 D C FU21C ø36 44 Furukawa HB2G/F Point 450 D P FU22P Chisel 450 D C FU22C ø45 45 Furukawa HB3G Point 560 D P FU23P Chisel 560 D C FU23C ø60 46 Furukawa HB5G Point 640 D P FU24P Chisel 640 D C FU24C ø75 20

23 FURUKAWA 47 Furukawa HB8G Point 750 D P FU25P Chisel 750 D C FU25C ø90 48 Furukawa HB10G Point 1000 D P FU26P Chisel 1000 D C FU26C ø Furukawa HB15G Point 1100 D P FU27P Chisel 1100 D C FU27C ø Furukawa HB20G Point 1200 D P FU28P Chisel 1200 D C FU28C ø Furukawa HB30G Point 1300 D P FU29P Chisel 1300 D C FU29C ø Furukawa HB40G Point 1400 D P FU30P Chisel 1400 D C FU30C ø160 21

24 HANWOO 53 Hanwoo RHB 301-V Point 480 D P HW11P Chisel 480 D C HW11C ø45 54 Hanwoo RHB 302/303-V Point 490 D P HW12P Chisel 490 D C HW12C ø50 55 Hanwoo RHB Point 500 D P HW13P Chisel 500 D C HW13C ø55 56 Hanwoo RHB 305-V Point 760 D P HW14P Chisel 760 D C HW14C ø68 57 Hanwoo RHB 308-2/ Point 900 D P HW15P Chisel 900 D C HW15C ø85 58 Hanwoo RHB 313-V Point 1050 D P HW16P Chisel 1050 D C HW16C ø105 22

25 HANWOO 59 Hanwoo RHB 322-2/ Point 1200 D P HW17P Chisel 1200 D C HW17C Blunt 1050 D B HW17B ø Hanwoo RHB 328-2/ Point 1450 D P HW18P Chisel 1450 D C HW18C Blunt 1300 D B HW18B ø Hanwoo RHB Point 1450 D P HW23P Chisel 1450 D C HW23C Blunt 1300 D B HW23B ø164 23

26 INDECO 62 Indeco HP150 Indeco UP121/150P, MES121/150, Euroram RM Point 440 D P IN23P Chisel 440 D C IN23C ø45 63 Indeco HP200 Indeco UP181/200P, MES180/181/200, Euroram RM Point 550 D P IN17P Chisel 550 D C IN17C ø48 64 Indeco HP350 Indeco UP301/350P/351P, MES 300/301/350/351, Euroram RM Point 600 D P IN18P Chisel 600 D C IN18C ø56 65 Indeco HP500 Indeco HB5, UP462/521/550P, MES 452/462/521/550, Euroram RM Point 650 D P IN11P Chisel 650 D C IN11C ø65 66 Indeco HP600 Indeco UP553, MES 553, Euroram RM Point 680 D P IN29P Chisel 680 D C IN29C ø65 45 ø73 67 Indeco HB8 Euroram RM Point 700 D P IN12P Chisel 700 D C IN12C ø80 24

27 INDECO 68 Indeco HP700 Indeco UP621/650P, MES 601/621/ Point 650 D P IN19P Chisel 650 D C IN19C ø80 69 Indeco HP900 Indeco UP Point 700 D P IN31P Chisel 700 D C IN31C ø84 61 ø89 70 Indeco HP1200 Indeco HB12, UP1200, MES 1200, Euroram RM85/ Point 800 D P IN13P Chisel 800 D C IN13C ø90 71 Indeco HP1500 Indeco HB19, UP1500, MES 1500, Euroram RM Point 900 D P IN15P Chisel 900 D C IN15C Blunt 800 D B IN15B ø Indeco HP1800 Indeco UP1750, MES 1750/1800, Euroram RM Point 1000 D P IN27P Chisel 1000 D C IN27C Blunt 900 D B IN27B ø Indeco HP2000 Indeco HB27, UP2000, MES 2000, Euroram RM Point 1000 D P IN16P Chisel 1000 D C IN16C Blunt 900 D B IN16B ø119 25

28 INDECO 74 Indeco HP2500 Indeco UP2500, MES 2500, Euroram RM Point 1050 D P IN20P Chisel 1050 D C IN20C Blunt 950 D B IN20B ø Indeco HP3000 Indeco UP3000, MES 3000, Euroram RM Point 1100 D P IN24P Chisel 1100 D C IN24C Blunt 1000 D B IN24B ø Indeco HP3500 Indeco UP3500, MES 3500, Euroram RM Point 1170 D P IN21P Chisel 1170 D C IN21C Blunt 1070 D B IN21B ø Indeco HP4000 Indeco UP4000, MES 4000, Euroram RM Point 1250 D P IN28P Chisel 1250 D C IN28C Blunt 1150 D B IN28B ø150 26

29 INDECO 78 Indeco HP5000 Indeco UP5000, MES 5000, Euroram RM Point 1320 D P IN22P Chisel 1320 D C IN22C Blunt 1170 D B IN22B ø Indeco HP7000 Indeco UP7000, MES 7000, Euroram RM Point 1450 D P IN25P Chisel 1450 D C IN25C Blunt 1300 D B IN25B ø Indeco HP9000 Indeco UP8500, MES 8500, Euroram RM Point 1530 D P IN26P Chisel 1530 D C IN26C Blunt 1380 D B IN26B ø195 27

30 ITALDEM 81 Italdem GK 85/86 Star SH Point 450 D P IT24P Chisel 450 D C IT24C ø46 82 Italdem GK 160/161 Star SH Point 500 D P IT25P Chisel 500 D C IT25C ø56 83 Italdem GK 211 Star SH Point 620 D P IT27P Chisel 620 D C IT27C ø68 84 Italdem GK 290/291 Star SH Point 660 D P IT28P Chisel 660 D C IT28C ø80 85 Italdem GK 360/ Point 700 D P IT29P Chisel 700 D C IT29C ø85 28

31 ITALDEM 86 Italdem GK 600/610 Star SH Point 900 D P IT30P Chisel 900 D C IT30C ø Italdem GK 950/960 Star SH Point 1050 D P IT31P Chisel 1050 D C IT31C Blunt 950 D B IT31B ø Italdem GK Point 1100 D P IT32P Chisel 1100 D C IT32C Blunt 1000 D B IT32B ø Italdem GK 1351S Star SH Point 1150 D P IT36P Chisel 1150 D C IT36C Blunt 1050 D B IT36B ø Italdem GK Point 1200 D P IT33P Chisel 1200 D C IT33C Blunt 1100 D B IT33B ø130 29

32 ITALDEM 91 Italdem GK Point 1350 D P IT34P Chisel 1350 D C IT34C Blunt 1200 D B IT34B ø Italdem GK 3400/ Point 1450 D P IT35P Chisel 1450 D C IT35C Blunt 1300 D B IT35B ø170 ø56 93 Italdem GK Point 1350 D P IT37P Chisel 1350 D C IT37C Blunt 1250 D B IT37B ø185 30

33 KRUPP 94 Krupp HM50/ ø60 Point 580 D P KR11P Chisel 580 D C KR11C ø45 ø45 95 Krupp HM60V Point 500 D P KR35P Chisel 500 D C KR35C ø48 96 Krupp HM60/ ø70 Point 600 D P KR12P Chisel 600 D C KR12C ø55 ø55 97 Krupp HM85/90/90V Point 600 D P KR31P Chisel 600 D C KR31C ø62 98 Krupp HM130/140V Point 780 D P KR14P Chisel 780 D C KR14C ø65 99 Krupp HM185/190V Point 800 D P KR15P Chisel 800 D C KR15C ø75 31

34 ITALDEM KRUPP 100 Krupp HM ø100 Point 835 D P KR16P Chisel 835 D C KR16C ø80 62 ø Krupp HM220/230 Krupp AT220, Chicago Pneumatic CP400/550, Berco BB Point 900 D P KR34P Chisel 900 D C KR34C ø Krupp HM300/301/ Point 900 D P KR17P Chisel 900 D C KR17C ø Krupp HM350/350V Atlas Copco MB Point 900 D P KR32P Chisel 900 D C KR32C ø Krupp HM550/560V Point 1000 D P KR19P Chisel 1000 D C KR19P ø Krupp HM580 Atlas Copco MB800, Chicago Pneumatic CP Point 1000 D P KR38P Chisel 1000 D C KR38P ø100 32

35 KRUPP 106 Krupp HM600/ ø120 Point 1000 D P KR20P Chisel 1000 D C KR20P ø ø Krupp HM700/701/702/ Point 1150 D P KR21P Chisel 1150 D C KR21C Blunt 1050 D B KR21B ø Krupp HM710/720 Chicago Pneumatic CP Point 1080 D P KR22P Chisel 1080 D C KR22C Blunt 1000 D B KR22B ø Krupp HM780 Atlas Copco MB Point 1150 D P KR39P Chisel 1150 D C KR39C Blunt 1050 D B KR39B Blunt 1150 D B KR39B ø Krupp HM950/960 Chicago Pneumatic CP ø135 Point 1080 D P KR25P Point 1350 D P KR25C Chisel 1080 D C KR25C Chisel 1350 D C KR25C Blunt 1080 D B KR25B Krupp HM1000 Atlas Copco MB Point 1200 D P KR37P Chisel 1200 D C KR37C Blunt 1100 D B KR37B ø140 33

36 KRUPP 112 Krupp HM1500MV Atlas Copco HB2200, Chicago Pneumatic CP Point 1300 D P KR28P Chisel 1300 D C KR28C Blunt 1150 D B KR28B ø Krupp HM2000MV Point 1400 D P KR29P Chisel 1400 D C KR29C Blunt 1250 D B KR29B ø Krupp HM2100/2300 Atlas Copco HB3000, Chicago Pneumatic CP Point 1500 D P KR40P Chisel 1500 D C KR40C Blunt 1350 D B KR40B ø Krupp HM2500/2600MV Atlas Copco HB4200, Chicago Pneumatic CP Point 1500 D P KR30P Chisel 1500 D C KR30C Blunt 1350 D B KR30B ø Krupp HM3000 Atlas Copco HB Point 1700 D P KR46P Chisel 1700 D C KR46C Blunt 1500 D B KR46B ø Krupp HM4000 Atlas Copco HB Point 1800 D P KR33P Chisel 1800 D C KR33C Blunt 1600 D B KR33B ø210 34

37 MONTABERT 118 Montabert BRH40 Idromeccanica IMI85, Italdem K80, OCM 8, Omal 80, OMD 8, Promove PMV90/P3SH, Star SH ø46 Point 500 D P MB11P Point 700 D P MB11P Chisel 500 D C MB11C Chisel 700 D C MB11C Montabert BRH76/ Point 550 D P MB12P Chisel 550 D C MB12C ø Montabert BRH125 Idromeccanica IMI260, Italdem K270, OCM 25, Omal 270, OMD 30, Promove PMV290/390/P12SH, Star SH ø80 Point 650 D P MB13P Point 760 D P MB13P Point 950 D P MB13P Chisel 650 D C MB13C Chisel 760 D C MB13C Chisel 950 D C MB13C Montabert BRH250/270 Idromeccanica IMI600, Italdem K550, OCM 55, Omal 500, OMD 50, Promove PMV690/P16SH, Star SH Point 850 D P MB14P Point 1000 D P MB14P Chisel 850 D C MB14C Chisel 1000 D C MB14C ø Montabert BRH501/570 Idromeccanica IMI1000, Indeco MES1750, Italdem K1000, OCM 100, Omal 1000, OMD 100, Promove PMV 1000/P23SH, Star SH Point 1000 D P MB15P Point 1300 D P MB15P Chisel 1000 D C MB15C Chisel 1300 D C MB15C ø114 Blunt 1000 D B MB15B

38 MONTABERT 123 Montabert BRH Point 1000 D P MB16P Chisel 1000 D C MB16P ø Montabert BRH625/900 Italdem K1030, Promove P22, Star SH ø118 Point 1000 D P MB17P Point 1150 D P MB17P Chisel 1000 D C MB17C Chisel 1150 D C MB17C Blunt 1000 D B MB17B Montabert BRH750 Italdem K1300, OCM130, Promove PMV1390/P27SH, Star SH Point 1100 D P MB18P Chisel 1100 D C MB18C Blunt 1000 D B MB18B ø Montabert 30 Bobcat B Point 410 D P MB35P Chisel 410 D C MB35C ø Montabert 50/50SMS Bobcat B Point 430 D P MB33P Point 630 D P MB33P Chisel 430 D C MB33C Chisel 630 D C MB33C ø50 36

39 MONTABERT 128 Montabert 70/70SMS Bobcat B Point 510 D P MB34P Point 710 D P MB34P Chisel 510 D C MB34C Chisel 710 D C MB34C ø Montabert 85/85SMS/90/90SMS Bobcat B850/B Point 620 D P MB37P Chisel 620 D C MB37C ø Montabert 125SX Point 750 D P MB40P Chisel 750 D C MB40C ø Montabert 140/140SMS/150/150SMS Point 740 D P MB36P Point 950 D P MB36P Chisel 740 D C MB36C Chisel 950 D C MB36C ø Montabert 300/300MS Point 850 D P MB39P Chisel 850 D C MB39C ø Montabert 700/700SMS Point 1000 D P MB25P Chisel 1000 D C MB25C ø112 37

40 MONTABERT 134 Montabert 900/900MS/BRH ø118 Point 1000 D P MB17P Point 1150 D P MB17P Chisel 1000 D C MB17C Chisel 1150 D C MB17C Blunt 1000 D B MB17B Montabert V1200/V1200MS/V32/V32MS ø122 Point 1100 D P MB21P Point 1300 D P MB21P Chisel 1100 D C MB21C Chisel 1300 D C MB21C Blunt 1100 D B MB21B Montabert Silver Clip 08 (SC08) ø58 Point 455 D P MB46P Chisel 455 D C MB46C Pyramid Pt 455 D PP MB46PP ø42 ø Montabert Silver Clip 12 (SC12) Bobcat ø63 Point 475 D P MB41P Chisel 475 D C MB41C Pyramid Pt 475 D PP MB41PP ø44 ø Montabert Silver Clip 16 (SC16) Bobcat ø75 Point 550 D P MB43P Chisel 550 D C MB43C Pyramid Pt 550 D PP MB43PP ø54 ø Montabert Silver Clip 22 (SC22) Bobcat ø82 Point 580 D P MB44P Chisel 580 D C MB44C Pyramid Pt 580 D PP MB44PP ø62 ø65 38

41 MONTABERT 140 Montabert Silver Clip 28 (SC28) Bobcat ø90 Point 620 D P MB42P Chisel 620 D C MB42C Pyramid Pt 620 D PP MB42PP ø69 ø Montabert V32/V32MS/V ø122 Point 1100 D P MB21P Point 1300 D P MB21P Chisel 1100 D C MB21C Chisel 1300 D C MB21C Blunt 1100 D B MB21B Montabert V Point 1250 D P MB22P Chisel 1250 D C MB22C Blunt 1100 D B MB22B ø Montabert V Point 1400 D P MB24P Chisel 1400 D C MB24C Blunt 1250 D B MB24B ø170 39

42 MSB 144 MSB MS200 Wimmer W Point 680 D P MS12P Chisel 680 D C MS12C ø MSB MS Point 700 D P MS22P Chisel 700 D C MS22C ø MSB MS300 Wimmer W Point 790 D P MS13P Chisel 790 D C MS13C ø MSB MS400 Wimmer W Point 920 D P MS14P Chisel 920 D C MS14C ø MSB MS Point 920 D P MS23P Chisel 920 D C MS23C ø100 40

43 MSB 149 MSB MS500 Wimmer W Point 1050 D P MS15P Chisel 1050 D C MS15C ø MSB MS600 (New) Point 1200 D P MS20P Chisel 1200 D C MS20C Blunt 1100 D B MS20B ø MSB MS700 Wimmer W Point 1200 D P MS21P Chisel 1200 D C MS21C Blunt 1100 D B MS21B ø MSB MS800 Wimmer W Point 1400 D P MS24P Chisel 1400 D C MS24C Blunt 1250 D B MS24B ø MSB MS900 Wimmer W Point 1450 D P MS19P Chisel 1450 D C MS19C Blunt 1300 D B MS19B ø170 41

44 MSB 154 MSB Saga Point 500 D P MS26P Chisel 500 D C MS26C ø MSB Saga Point 580 D P MS27P Chisel 580 D C MS27C ø MSB Saga Point 630 D P MS28P Chisel 630 D C MS28C ø68 42

45 NPK 157 NPK E Point 390 D P NP58P Chisel 390 D C NP58C ø NPK E Point 410 D P NP59P Chisel 410 D C NP59C ø NPK E Point 500 D P NP43P Chisel 500 D C NP43C ø NPK E Point 550 D P NP44P Chisel 550 D C NP44C ø NPK E Point 650 D P NP45P Chisel 650 D C NP45C ø NPK E Point 700 D P NP46P Chisel 700 D C NP46C ø66 43

46 NPK 163 NPK E Point 750 D P NP47P Chisel 750 D C NP47C ø NPK E Point 850 D P NP48P Chisel 850 D C NP48C ø NPK E Point 940 D P NP49P Chisel 940 D C NP49C ø NPK E Point 950 D P NP53P Chisel 950 D C NP53C ø NPK E-208A Point 1050 D P NP54P Chisel 1050 D C NP54C ø NPK E Point 1100 D P NP26P Chisel 1100 D C NP26C ø126 44

47 NPK 169 NPK E Point 1200 D P NP34P Chisel 1200 D C NP34C Blunt 1100 D B NP34B ø NPK E Point 1300 D P NP37P Chisel 1300 D C NP37C Blunt 1150 D B NP37B ø NPK E Point 1350 D P NP35P Chisel 1350 D C NP35C Blunt 1200 D B NP35B ø NPK E Point 1525 D P NP39P Chisel 1525 D C NP39C Blunt 1350 D B NP39B ø NPK E-240A Point 1700 D P NP56P Chisel 1700 D C NP56C Blunt 1500 D B NP56B ø NPK GH Point 1200 D P NP55P Chisel 1200 D C NP55C Blunt 1100 D B NP55B ø136 45

48 NPK 175 NPK H-06X Point 470 D P NP10PO470 4 Chisel 470 D C NP10C ø NPK H-08XA Arrowhead 2T Point 480 D P NP11P Chisel 480 D C NP11C ø NPK H-1XA Point 580 D P NP13P Chisel 580 D C NP13C ø NPK H-2XA/H-2XE Arrowhead 4T Point 620 D P NP14P Chisel 620 D C NP14C ø NPK H-3XA/H-3XE Arrowhead 6T Point 710 D P NP16P Chisel 710 D C NP16C ø NPK H-4X Point 780 D P NP17P Chisel 780 D C NP17C ø90 46

49 NPK 181 NPK H-6XA Point 920 D P NP18P Chisel 920 D C NP18C ø NPK H-7XA Point 930 D P NP20P Chisel 930 D C NP20C ø NPK H-8XA Point 1015 D P NP22P Chisel 1015 D C NP22C ø NPK H-10XB/H-10XE Point 1100 D P NP27P Chisel 1100 D C NP27P Blunt 1000 D B NP27B ø NPK H-12XE Point 1200 D P NP28P Chisel 1200 D C NP28C Blunt 1100 D B NP28B ø136 47

50 RAER 186 Rammer S18/ Piccolo Kubota KXB300/350, Volvo HB Point 400 D P RM60P Chisel 400 D C RM60C ø Rammer S21 Caterpillar H45FT, Bobcat 1750, Case CB140, JCB HM160, Kubota KXB400/BTB400, O&K H32, Volvo HB ø45 Point 480 D P RM11P Point 560 D P RM11P Chisel 480 D C RM11C Chisel 560 D C RM11C Rammer S22 Caterpillar H50FT, Case CB200, Kubota KXB450, O&K H45, Volvo HB ø50 Point 530 D P RM25P Point 600 D P RM25P Chisel 530 D C RM25C Chisel 600 D C RM25C Rammer S23 Caterpillar H63/H63FT, Case CB370, JCB HM260, Kubota KXB500, O&K H65, Volvo HB Point 680 D P RM12P Point 780 D P RM12P Chisel 680 D C RM12C Chisel 49 ø D C RM12C Rammer S25 Caterpillar H70/H70FT, Case CB620, JCB HM360, Kubota KXB600, O&K H85, Volvo HB Point 730 D P RM14P Point 830 D P RM14P Chisel 730 D C RM14C Chisel 830 D C RM14C ø Rammer S Point 850 D P RM15P Chisel 850 D C RM15C ø90 48

51 RAER 192 Rammer S27 Caterpillar H90/H90FT, Case CB735, JCB HM550, O&K H120, Volvo HB Point 840 D P RM27P Chisel 840 D C RM27C ø Rammer S29 Caterpillar H100/H100FT, Case CB1150, JCB HM850, O&K H150, Volvo HB Point 900 D P RM24P Chisel 900 D C RM24C ø Rammer S Point 900 D P RM16P Chisel 900 D C RM16C ø Rammer S Point 1050 D P RM17P Chisel 1050 D C RM17C ø Rammer S55/E66 Caterpillar H120s, Case CB2850, JCB HM1350, O&K H ø115 Point 1050 D P RM18P Point 1150 D P RM18P Chisel 1050 D C RM18C Chisel 1150 D C RM18C Blunt 950 D B RM18B Rammer S Point 1100 D P RM19P Chisel 1100 D C RM19C Blunt 1000 D B RM19B ø130 49

52 RAER 198 Rammer S Point 1200 D P RM20P Chisel 1200 D C RM20C Blunt 1050 D B RM20B ø Rammer S83 Caterpillar H140As Point 1200 D P RM21P Chisel 1200 D C RM21C Blunt 1050 D B RM21B ø Rammer S84 Caterpillar H160As Point 1350 D P RM22P Chisel 1350 D C RM22C Blunt 1200 D B RM22B ø Rammer S Point 1450 D P RM23P Chisel 1450 D C RM23C Blunt 1300 D B RM23B ø Rammer E63 JCB HM1150, Volvo HB Point 1000 D P RM34P Chisel 1000 D C RM34C ø Rammer E64 Caterpillar H115s, Case CB1450, JCB HM1050, O&K H Point 1050 D P RM30P Point 1150 D P RM30P Chisel 1050 D C RM30C Chisel 1150 D C RM30C ø106 50

53 RAER 204 Rammer E65 JCB HM1450, Volvo HB Point 1050 D P RM33P Chisel 1050 D C RM33C Blunt 850 D B RM33B ø Rammer E66/S55 Caterpillar H120s, Case CB2850, JCB HM1350, O&K H ø115 Point 1050 RM18P1050 D P 80 Point 1150 RM18P1150 D P 88 Chisel 1050 RM18C1050 D C 80 Chisel 1150 RM18C1150 D C 88 Blunt 950 RM18B0950 D B Rammer E68 Caterpillar H130s, Case CB3750, JCB HM1750, O&K H310, Volvo HB ø130 Point 1100 D P RM32P Point 1200 D P RM32P Chisel 1100 D C RM32C Chisel 1200 D C RM32C Blunt 900 D B RM32B Rammer G80 Caterpillar H140Cs/140Ds, Case CB4000, JCB HM2350, O&K H380, Volvo HB Point 1200 D P RM35P Chisel 1200 D C RM35C Blunt 1050 D B RM35B ø Rammer G90 Caterpillar H160Cs/160Ds, Case CB5200, JCB HM2950, O&K H530, Volvo HB Point 1400 D P RM36P Chisel 1400 D C RM36C Blunt 1250 D B RM36B ø Rammer G100 Caterpillar H180s, JCB HM Point 1450 D P RM41P Chisel 1450 D C RM41C Blunt 1300 D B RM41B ø169 51

54 RAER 210 Rammer G110 Caterpillar H180Ds, JCB HM3950, O&K H700, Volvo HB Point 1450 D P RM42P Chisel 1450 D C RM42C Blunt 1300 D B RM42B ø Rammer G120 Caterpillar H Point 1500 D P RM40P Chisel 1500 D C RM40C Blunt 1350 D B RM40B ø Rammer G Point 1550 D P RM43P Chisel 1550 D C RM43C Blunt 1400 D B RM43B ø Rammer M Point 1100 D P RM44P Chisel 1100 D C RM44C ø Rammer M Point 1200 D P RM45P Chisel 1200 D C RM45C Blunt 1100 D B RM45B ø140 52

55 ROTAIR 215 Rotair OL50 Furukawa F1/HB1G, Gehl G50S Point 400 D P FU21P Chisel 400 D C FU21C ø Rotair OL90 (With Collar) Pel-Job MH90, Omal 80S ø64 Point 480 D P PJ11P Chisel 480 D C PJ11C ø48 38 ø Rotair OL90/95 Pel-Job MH95, Gehl G95S Point 480 D P RT11P Chisel 480 D C RT11C ø Rotair OL130/160 Pel-Job MH130/160, Gehl G160S Point 500 D P RT14P Chisel 500 D C RT14C ø Rotair OL180/260 Pel-Job MH180/260, Gehl G260S Point 550 D P RT12P Chisel 550 D C RT12C ø Rotair OL250/330 Gehl G330S Point 600 D P RT13P Chisel 600 D C RT13C ø78 53

56 SOCOMEC 221 Socomec DMS Point 350 D P SO28P Chisel 350 D C SO28C ø Socomec DMS Point 480 D P SO25P Chisel 480 D C SO25C ø Socomec DMS Point 570 D P SO26P Chisel 570 D C SO26C ø Socomec DMS Point 600 D P SO21P Chisel 600 D C SO21C ø Socomec DMS Point 700 D P SO23P Chisel 700 D C SO23C ø Socomec DMS Point 780 D P SO27P Chisel 780 D C SO27C ø85 54

57 SOCOMEC 227 Socomec DMS Point 900 D P SO34P Chisel 900 D C SO34C ø Socomec MDO Point 970 D P SO11P Chisel 970 D C SO11C ø Socomec MDO Point 1050 D P SO12P Chisel 1050 D C SO12C ø Socomec MDO Point 1150 D P SO14P Chisel 1150 D C SO14C Blunt 1050 D B SO14B ø Socomec MDO Point 1250 D P SO20P Chisel 1250 D C SO20C Blunt 1150 D B SO20B ø140 55

58 SOOSAN 232 Soosan SB Point 450 D P SS18P Chisel 450 D C SS18C ø Soosan SB Point 500 D P SS12P Chisel 500 D C SS12C ø Soosan SB Point 570 D P SS10P Chisel 570 D C SS10C ø Soosan SB40 Stanley MB Point 710 D P SS11P Chisel 710 D C SS11C ø Soosan SB Point 800 D P SS22P Chisel 800 D C SS22C ø Soosan SB45 Stanley MB20EX Point 850 D P SS13P Chisel 850 D C SS13C ø85 56

59 SOOSAN 238 Soosan SB50 Stanley MB30EX Point 1000 D P SS14P Chisel 1000 D C SS14C ø Soosan SB60 Stanley MB40EX Point 1050 D P SS16P Chisel 1050 D C SS16C ø Soosan SB81 Stanley MB50EX Point 1200 D P SS20P Chisel 1200 D C SS20C Blunt 1100 D B SS20B ø Soosan SB Point 1300 D P SS23P Chisel 1300 D C SS23C Blunt 1200 D B SS23B ø Soosan SB121 Stanley MB70EX Point 1300 D P SS19P Chisel 1300 D C SS19C Blunt 1200 D B SS19B ø155 57

60 SOOSAN 243 Soosan SB130/140 Stanley MB80EX Point 1400 D P SS24P Chisel 1400 D C SS24C Blunt 1250 D B SS24B ø Soosan SB151 Stanley MB100EX Point 1600 D P SS21P Chisel 1600 D C SS21C Blunt 1450 D B SS21B ø175 58

61 TOKU 245 Toku TNB-08E/1M Teledyne TB Point 470 D P TK29P Chisel 470 D C TK29C ø Toku TNB-1E/2M Drago DRH80, Teledyne TB120/ Point 500 D P TK11P Point 600 D P TK11P Chisel 500 D C TK11C Chisel 600 D C TK11C ø Toku TNB-2E/3M Drago DRH120, Teledyne TB180/ ø58 Point 650 D P TK12P Point 700 D P TK12P Chisel 650 D C TK12C Chisel 700 D C TK12C Toku TNB-3E/4M Drago DRH150, Teledyne TB Point 650 D P TK20P Point 700 D P TK20P Chisel 650 D C TK20C Chisel 700 D C TK20C ø Toku TNB-4E/5M Drago DRH180, Teledyne TB220/ ø75 Point 650 D P TK13P Point 720 D P TK13P Chisel 650 D C TK13C Chisel 720 D C TK13C Toku TNB-6E/7M Drago DRH 280, Teledyne TB400/425/ ø95 Point 760 D P TK14P Point 850 D P TK14P Chisel 760 D C TK14C Chisel 850 D C TK14C

62 TOKU 251 Toku TNB-7E/10E Drago DRH650S/900, Teledyne TB700/725/750/ Point 950 D P TK15P Point 1000 D P TK15P Chisel 950 D C TK15C Chisel 1000 D C TK15C ø Toku TNB-14E/16E Drago DRH1150S/1600S, Teledyne TB900/925/975/1000/ Point 1150 D P TK16P Chisel 1150 D C TK16C Blunt 1050 D B TK16B ø Toku TNB-22E/23E Drago DRH1900, Teledyne TB1300/ Point 1300 D P TK18P Chisel 1300 D C TK18C Blunt 1150 D B TK18B ø Toku TNB-30E/31E Teledyne TB1825/ Point 1500 D P TK27P Chisel 1500 D C TK27C Blunt 1350 D B TK27B ø Toku TNB-100 Teledyne TB Point 1050 D P TK21P Chisel 1050 D C TK21C ø115 60

63 TOKU 256 Toku TNB-150 Teledyne TB ø135 Point 1180 D P TK22P Point 1270 D P TK22P Chisel 1180 D C TK22C Chisel 1270 D C TK22C Blunt 1100 D B TK22B Toku TNB Point 1200 D P TK25P Chisel 1200 D C TK25C Blunt 1100 D B TK25B ø Toku TNB-230 Teledyne TB Point 1220 D P TK23P Chisel 1220 D C TK23C Blunt 1100 D B TK23B ø Toku TNB-310 Teledyne TB Point 1350 D P TK27P Chisel 1350 D C TK27C Blunt 1200 D B TK27B ø Toku TNB-400 Teledyne TB Point 1550 D P TK32P Chisel 1550 D C TK32C Blunt 1400 D B TK32B ø178 61

64 TOYO 261 Toyo THBB31 Dehaco DHB35, JKHB31, Takeuchi TKB Point 350 D P TO18P Chisel 350 D C TO18C ø Toyo THBB51 Dehaco DHB55, JKHB51, Takeuchi TKB Point 400 D P TO19P Chisel 400 D C TO19C ø Toyo THBB71 Dehaco DHB75, JKHB71, Takeuchi TKB Point 450 D P TO11P Chisel 450 D C TO11C ø Toyo THBB101 Dehaco DHB165, JKHB101, Takeuchi TKB Point 550 D P TO12P Chisel 550 D C TO12C ø Toyo THBB201 Takeuchi TKB Point 700 D P TO23P Chisel 700 D C TO23C ø70 62

65 TOYO 266 Toyo THBB301 Dehaco DHB305, JKHB301, Takeuchi TKB Point 750 D P TO13P Chisel 750 D C TO13C ø Toyo THBB401 Dehaco DHB405, JKHB401, Takeuchi TKB Point 900 D P TO14P Chisel 900 D C TO14C ø Toyo THBB801 Dehaco DHB805, JKHB801, Takeuchi TKB Point 960 D P TO15P Chisel 960 D C TO15C ø Toyo THBB1101 Dehaco DHB1250, JKHB1101, Takeuchi TKB Point 1050 D P TO20P Chisel 1050 D C TO20C ø Toyo THBB1401 Dehaco DHB1305, JKHB 1401, Takeuchi TKB Point 1050 D P TO16P Chisel 1050 D C TO16C ø130 63

66 TOYO 271 Toyo THBB1600 Dehaco DHB1605 (1405), JKHB1600, Takeuchi TKB Point 1120 D P TO21P Chisel 1120 D C TO21C Blunt 1020 D B TO21B ø Toyo THBB2000 Dehaco DHB2305, JKHB2000, Takeuchi TKB Point 1250 D P TO17P Chisel 1250 D C TO17C Blunt 1150 D B TO17B ø Toyo THBB3000 Dehaco DHB3205 (4105), JKHB3000, Takeuchi TKB Point 1400 D P TO22P Chisel 1400 D C TO22C Blunt 1250 D B TO22B ø160 64

67 Other Manufacturers Reference Index Fig Hammer Type Cat. Hammer Type Diameter Length Cat. Weight mm mm kgs ARDEN 275 AB D P/C DA10P AB 150/ D P/C DA11P AB 280/ D P/C DA12P AB D P/C DA13P AB D P/C DA16P ARROWHEAD 281 S D P/C AH10P S D P/C AH11P S D P/C AH12P S D P/C AH14P T D P/C AH16P T D P/C AH23P BOBCAT D P/C ST12P D P/C ST14P /2570/ D P/C ST13P D P/C ST15P D P/C ST16P DAEMO 287 DMB S D P/C DM10P DMB S D P/C DM13P DMB S D P/C DM16P DMB S D P/C DM14P DMB S D P/C DMB S D P/C DM11P D&A 275 8V D P/C DA10P V/20V D P/C DA11P V/50V D P/C DA12P V D P/C DA13P V D P/C DA16P V D P/C DA18P HUSKIE/IZUMI 294 HH D P/C HH D P/C JB10P HH D P/C HU1P HH D P/C HH D P/C JB11P HH D P/C JB19P HH D P/C JB15P HH D P/C JB12P HH D P/C 153 LIFTON 303 LH70/ D P/C LF11P LH D P/C LF12P LH D P/C LF13P LH D P/C LF14P LH D P/C LF15P LH D P/C 91 65

68 Other Manufacturers Reference Index Fig Hammer Type Cat. Hammer Type Diameter Length Cat. Weight mm mm kgs OKADA 309 OKB/UB D P/C OK20P OKB/UB 301SL D P/C OK21P OKB/UB D P/C OK22P OKB/UB 302A D P/C OK42P OKB/UB 303A D P/C OK23P OKB/UB D P/C OK24P OKB/UB 304B D P/C OK43P OKB/UB D P/C OK25P OKB/UB D P/C OK28P OKB/UB D P/C OK30P OKB/UB 312B D P/C OK32P OKB/UB D P/C OK36P OKB/UB D P/C OK38P UB D P/C UB D P/C UB D P/C UB D P/C OK13P UB D P/C OK41P UB D P/C OK14P UB17/OKB17A D P/C OK40P STANLEY 329 MB D P/C ST12P MB D P/C ST14P MB 250/256/350/ D P/C ST13P MB D P/C ST15P MB 656/675/ D P/C ST16P MB 800/ D P/C ST17PO MB D P/C ST19P MB 1950/ D P/C ST21P MB 2950/ D P/C MB D P/C 142 TABE 341 AGB 100/175/ D P/C TB16P AGB 270/275/350/ D P/C TB10P AGB 400/ D P/C TB11P AGB 700/701/ D P/C TB12P AGB 1000/1300/ D P/C TB13P AGB 1600/ D P/C AGB D P/C TB15P TOPA 348 TOPA D P/C TP10P TOPA D P/C TP11P TOPA D P/C TP12P TOPA D P/C TP13P TOPA D P/C TP14P TOPA D P/C TP15P TOPA D P/C TOPA D P/C TP16P VIBRARAM 295 VRH D P/C JB10P VRH D P/C HU1P VRH D P/C JB11P VRH D P/C JB19P VRH D P/C JB15P VRH D P/C JB12P VRH D P/C

69 Warranty Guide The purpose of this guide is to provide advice on the correct application of P&V our Demolition Tools and assist in analysing and resolving any complaints immediately they occur. Cause and Effect of Fatigue Failures The continuous cycle of compressive and tensile stresses in a Demolition Tool, even under correct operating conditions, creates fatigue stress in the tool which can lead to fatigue failure of the tool before it is worn out. Anything which interferes with the normal operational cycle of compressive and tensile stresses will increase the level of fatigue stress being applied to the tool, increasing the risk of early fatigue failure. 3) Lubrication Regular lubrication is essential. Any form of damage to the surface of a demolition tool renders it more liable to suffer fatigue failure. Care must be taken to prevent accidental gouging or contact welding ( galling or pickup ) due to contact between the tool and chuck bushings either through lack of lubrication or excessive leverage (see 2). 2 1) Leverage/Bending The main cause of increased fatigue stress in a demolition tool is any form of side pressure during service which creates bending. Utilising the tool as a lever, using the incorrect driving angle or attempting to break ground using the pull of the machine are all detrimental to the life of a demolition tool and should be avoided (see 1). 1 HIGH PRESSURE AND FRICTION CAN DAMAGE SURFACE OF TOOL SHANK LEVERING THE TOOL WORK FACE LEVERAGE USING MACHINE TO PULL INCORRECT DRIVING ANGLE 4) Cold/Corrosion Low temperature causes a Demolition Tool to be more susceptible to fatigue failure. Tools should be kept sheltered from the weather when not in use. A rusty Demolition Tool is more likely to suffer fatigue failure, so tools should be kept well greased. 5) Worn Internal Hammer Parts Worn hammer parts can cause the tool to be held too loosely. This can create surface damage on the tool, which can lead to fatigue failure of the tool. Worn parts can also cause uneven striking on the tool, which may lead to fatigue failure of the tool and damage to the piston. 2) Free Running / Blank Firing This can arise in any situation where the working end is not in proper contact with the material to be broken. This includes jobs where the tool slides off the work and also when break-through of thin concrete slabs or boulders occurs. It is essential that the tool is applied at a right-angle to the working surface at all times. continued on next page 67

70 Warranty Guide - continued 6) Typical Failures (Guide to Warranty Claims) P&V Our Demolition Tools are manufactured from first class materials and then heat-treated to produce tools with optimum fatigue and wear resistance. When a tool has apparently failed to give satisfactory service life, a brief visual inspection can often give a quick indication of the cause. d) Typical fractures caused by blank firing and/or excessive chuck bush wear/damage. Warranty claims rejected. a) Typical fractures caused by excessive bending/leverage of the demolition tool. Warranty claims rejected. e) Typical fractures caused by blank firing and/or twisting of the tool due to worn/damaged retainer pin. Warranty claims rejected. STRESS CONCENTRATION POINT 90 f) Typical fracture caused by lack of lubrication and/or chuck bush wear/damage. Warranty claims rejected. HOLLOW b) Typical of high stress fracture, usually caused by using the tool as an anchor to "pull" the machine. Warranty claims rejected STRESS CONCENTRATION POINT AT TO THE 90 RETAINER PIN FLATS g) Mushrooming: this is caused by driving the chisel or point into hard dense material for too long a period of time without penetration. This generates intense heat, softening the point and causing it to mushroom. This is not a manufacturing fault. Warranty claims rejected. c) Typical fracture caused by levering tool whilst buried in the burden. Warranty claims rejected. h) Note fatigue lines originate from the internal point, not outer diameter. Very rare failure type due to steel defect. 100% warranty accepted. 68

71 2013 THOMAS TURTON Callywhite Lane, Dronfield, Sheffield S18 2XT, England.

72 THOMAS TURTON Callywhite Lane, Dronfield, Sheffield S18 2XT, England. Tel: +44 (0) Fax: +44 (0)