AIR VENT T E C H N O L O G Y. infinity. energy efficient - environmentally friendly - economical EC MOTORS - direct drive - CuSTOM built ErP Compliant
|
|
|
- Doreen Snow
- 5 years ago
- Views:
Transcription
1 infinity AIR VENT T E C H N O L O G Y energy efficient - environmentally friendly - economical EC MOTORS - direct drive - CuSTOM built ErP Compliant
2 INDEX Selection Chart Page 3 Internal & External Acoustic Cabinet & Twin Fans - General Page 6 Performance - QSS-EC/EM-EC/QST-EC/EMT-EC 15s Page 7 Performance - QSS-EC/EM-EC/QST-EC/EMT-EC 2s Page 8 Performance - QSS-EC/EM-EC/QST-EC/EMT-EC 25s Page 9 Performance - QSS-EC/EM-EC/QST-EC/EMT-EC 31s Page 1 Performance - QSS-EC/EM-EC/QST-EC/EMT-EC 35s Page 11 Performance - QSS-EC/EM-EC/QST-EC/EMT-EC 45s Page 12 Performance - QSS-EC/EM-EC/QST-EC/EMT-EC 56s Page 13 Dimensions - QSS-EC/EM-EC - single Page 14 Dimensions - QST-EC/EMT-EC - twin Page 15 Heat Recovery Units - Internal & External: Side by Side & Stacked: EHB or LPH heating coil - General Page 16 Performance - HRP1EC Page 17 Performance - HRP2EC Page 18 Dimensions - HRP1EC & HRP2EC Page 19 Performance - HRP3EC Page 2 Performance - HRP4EC Page 21 Performance - HRP5-1EC Page 22 Performance - HRP5-2EC Page 23 Performance - HRP5-3EC Page 24 Performance - HRP6-1EC Page 25 Performance - HRP6-2EC Page 26 Dimensions - HRP-ECs Internal - Side by side & Stacked Page 27 Dimensions - HRP-ECs External - Side by side & Stacked Page 28 Performance HRP35-1 Page 29 Performance HRP35-2 Page 3 Dimensions - HRP35s Page 31 Compact Air Handling Units - Internal & External: EHB or LPH heating coil - General Page 32 Performance - IME/EME 12/15-ECs Page 33 Performance - IME/EME 2-ECs Page 34 Performance - IME/EME 25-ECs Page 35 Performance - IME/EME 31-ECs Page 36 Dimensions - IME/EME-ECs Page 37 Performance - IM/EM 12/15-ECs Page 38 Performance - IM/EM 2-ECs Page 39 Performance - IM/EM 25-ECs Page 4 Performance - IM/EM 31-ECs Page 41 Dimensions - IM/EM-ECs Page 42 Air Handling Units - Internal & External: EHB or LPH heating coil - General Page 43 Performance - SPE/SRE1-ECs Page 44 Performance - SPE/SRE4-ECs Page 45 Performance - SPE/SRE6-ECs Page 46 Performance - SPE/SRE7-ECs Page 47 Dimensions - SPE/SRE-ECs - Internal & External Page 48 Performance - SP/SR1-ECs Page 49 Performance - SP/SR4-ECs Page 5 Performance - SP/SR6-ECs Page 51 Performance - SP/SR7-ECs Page 52 Dimensions - SP/SR-ECs - Internal & External Page 53 Controller, Grille and Damper Page 54 Ancillaries Page 55 Page 2
3 SELECTION CHART Maximum Air Volume - all models (m 3 /sec) QSS15 QSS2 QSS25 QSS31 QSS355 QSS45 QSS56 IME15 IME2 IME25 IME31 SPE1 SPE4 SPE6 SPE7 IM15 IM2 IM25 IM31 SP1 SP4 SP6 SP7 HRP1 HRP2 HRP3 HRP4 HRP5-1 HRP5-2 HRP5-3 HRP6-1 HRP6-2 HRP35-1 HRP Page 3
4 Air Vent Technology was founded in 1996 in order to provide high quality products to the Heating and Ventilation market. Since that date the Company has established a reputation throughout the UK, undertaking many high profile contracts. The success of the Company has been, and remains, attributable to a firm commitment to quality and customer care. Commitment to quality was reinforced in 21 by the introduction of the ISO91 quality management system. In 27 AVT was brought under the Vectaire Group of Companies and has since benefitted from over thirty years' experience in the air movement industry, together with an innovative approach to product development (with particular regard to energy efficient products which have a high performance/energy ratio). AVT has now developed a range of products specifically intended to ensure the maximum energy saving efficiency by using EC motors - infinity AVT aims to supply ventilation solutions which provide the best in energy efficiency, comfort and design for every segment of the market, and to ensure that its responsibility to the environment is a prime feature in designs for ventilation schemes. AVT solutions to ventilation problems also reflect a proper combination of cost effectiveness and energy efficiency AVT's highly trained field sales force covers the whole of the United Kingdom and can provide quality local support with technical expertise on products. AVT can design ventilation schemes from small to large providing a total, compatible package, thus guaranteeing a quality ventilation solution. All AVT products are designed and produced in the UK to the highest standards. Ventilation/heat recovery/air handling systems can be custom built to solve any specification requirement whilst complying with all the latest building regulations. Page 4
5 The infinity range has been designed to encompass a comprehensive range of energy efficient, environmentally friendly and economical products. infinity fans all have integral trickle and boost controllers to allow them to run continuously at their most effective supply/extract capacity. The user can boost to maximum airflow as and when required by means of a variety of remote switches The infinity range includes cabinet fans, both single and twin fans, direct drive air handling units with airflows from.1 to 1.57 m 3 /sec for EHB or LPH heating, and direct drive heat recovery units - again for EHB or LPH heating delivering up to.93 m 3 /sec. All of these models are available for internal or external installation AVT can supply a complete range of accessories including silencers, attenuators, pressure switches, filters, antivibration mounts etc, as well as step control panels and electric heater batteries. The infinity range allows compliance with all the latest building regulations, and in particular are ErP Directive Compliant. Every unit is built in the UK using the latest technology and with EC motors for the ultimate in energy saving and low specific fan powers All models are super quiet with high performance acoustic linings. To complete the infinity range AVT has developed a series of low profile, direct drive, heat recovery units. These products have all the benefits of others in the infinity range, but have the added advantage of having a maximum profile of only 35mm allowing heat recovery units to be installed in the tightest of spaces. Page 5
6 COMPACT AIR HANDLING UNITS ELECTRIC HEATER BATTERY OR LPH HEATING COIL 4 sizes super quiet - high performance acoustic lining integral trickle and boost, and isolator airflow to.6m 3 /sec internal model cabinets from.9mm to 1.6mm thick galvanised sheet steel lined with 25mm Barafoam"O" class 6mm barrier mat layer. External models with plastisol finish can be mounted horizontally or vertically with access either on bottom or top complete with integral mounting points for either floor or ceiling mounting quick and easy to install external models available with top access via a single remov - able weather lid external unit air inlets protected by weatherproof cowl and bird guard external models in galvanised steel, single skinned with plasti sol exterior in light grey to BS1A5 direct drive single inlet, single width, backward curved centrifugal type fans fan blades statically and dynamically balanced in accordance with ISO 194/1 and balancing quality G6.3 direct drive induction motors with IP54 protection insulation 25mm barafoam 'O' Class with 6mm barrier mat layer a manual reset thermal cut-out is an integral part of heater control circuits. It is recommended that fans should be oper ated via a run-on timer incorporated within the controller LPH batteries from copper tubes mechanically bonded to aluminium fins supplied with standard BSP male connections maximum air temperature 4ºC panel filters fitted into slide-in channels and manufactured from bonded and coated spun glass fibre to EU3 grade, fitted as standard in easily removable housings manufactured in UK to ISO 91 energy efficient, environmentally friendly, economical EC motors - ErP 213 and 215 Compliant IME15 Max Air Volume (m 3 /sec) IM15 Max Air Volume (m 3 /sec) IME2 IM2 IME25 IM25 IME31 IM Page 32
7 COMPACT AIR HANDLING UNITS ELECTRIC HEATER BATTERY Technical Data - IME/EME12/15-ECs SFP - 1.2/L/S 35 SFP - 1./L/S SFP -.8/L/S SFP -.6/L/S SFP -.4 /L/S 25 4% 6% 1% IME/EME 12/ V, 1Ph.4 IME/EME12/15-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db <2 <2 Outlet in duct db Inlet in duct db Outlet in duct db <2 <2 <2 Inlet in duct db % Outlet in duct db <2 <2 <2 <2 4% Inlet in duct db Outlet in duct db <2 <2 <2 <2 Page 33
8 COMPACT AIR HANDLING UNITS ELECTRIC HEATER BATTERY Technical Data - IME/EME2-ECs SFP - 1.2/L/S 35 SFP - 1./L/S SFP -.8/L/S SFP -.6/L/S SFP -.4 /L/S % 6% 1% IME/EME V, 1Ph.55 IME/EME2-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db Inlet in duct db <2 <2 6% Outlet in duct db % Inlet in duct db <2 <2 <2 <2 Outlet in duct db Page 34
9 COMPACT AIR HANDLING UNITS ELECTRIC HEATER BATTERY Technical Data - IME/EME25-ECs SFP - 1.2/L/S SFP -.8/L/S 35 SFP - 1./L/S SFP -.6/L/S SFP -.4 /L/S 25 4% 6% 1% IME/EME V, 1Ph 1.4 IME/EME25-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db <2 <2 Outlet in duct db % Inlet in duct db <2 <2 <2 <2 Outlet in duct db % Inlet in duct db <2 <2 <2 <2 Outlet in duct db Page 35
10 COMPACT AIR HANDLING UNITS ELECTRIC HEATER BATTERY Technical Data - IME/EME31-ECs SFP - 1.2/L/S 4% SFP - 1./L/S SFP -.8/L/S 1% SFP -.6/L/S SFP -.4 /L/S % IME/EME V, 1Ph 3.1 IME/EME31-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db % Inlet in duct db Outlet in duct db % Inlet in duct db <2 <2 <2 Outlet in duct db Page 36
11 COMPACT AIR HANDLING UNITS ELECTRIC HEATER BATTERY Dimensions - IME/EME-ECs IME ECs Model A B C D kg IME12EC IME15EC IME2EC IME25EC IME31EC Model A B C D kg EME12EC EME15EC EME2EC EME25EC EME31EC EME ECs Page 37
12 COMPACT AIR HANDLING UNITS LPH HEATING COIL Technical Data - IM/EM12/15-ECs SFP - 1.2/L/S 35 SFP - 1./L/S SFP -.8/L/S SFP -.6/L/S SFP -.4 /L/S 25 4% 6% 1% IM/EM 12/ V, 1Ph.4 IME/EME12/15-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db <2 <2 Outlet in duct db Inlet in duct db <2 <2 <2 Outlet in duct db Inlet in duct db <2 <2 <2 <2 6% Outlet in duct db % Inlet in duct db <2 <2 <2 <2 Outlet in duct db Page 38
13 COMPACT AIR HANDLING UNITS LPH HEATING COIL Technical Data - IM/EM2-ECs SFP - 1.2/L/S 35 SFP - 1./L/S SFP -.8/L/S SFP -.6/L/S SFP -.4 /L/S % 6% 1% IM/EME2 7 23V, 1Ph.55 IM/EM2-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db % Inlet in duct db <2 <2 Outlet in duct db % Inlet in duct db <2 <2 <2 <2 Outlet in duct db Page 39
14 COMPACT AIR HANDLING UNITS LPH HEATING COIL Technical Data - IM/EM25-ECs SFP - 1.2/L/S SFP - 1./L/S SFP -.8/L/S SFP -.6/L/S SFP -.4 /L/S 25 4% 6% 1% IM/EM V, 1Ph 1.4 IM/EM25-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db <2 <2 Outlet in duct db % Inlet in duct db <2 <2 <2 <2 Outlet in duct db % Inlet in duct db <2 <2 <2 <2 Outlet in duct db Page 4
15 COMPACT AIR HANDLING UNITS LPH HEATING COIL Technical Data - IM/EM31-ECs SFP - 1.2/L/S 45 SFP - 1./L/S SFP -.8/L/S 325 1% SFP -.4 /L/S SFP -.6/L/S % 6% IM/EM V, 1Ph 3.1 IM/EM31-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db % Inlet in duct db Outlet in duct db % Inlet in duct db <2 <2 <2 Outlet in duct db Page 41
16 COMPACT AIR HANDLING UNITS LPH HEATING COIL Dimensions - LPH models IM ECs Model A B C D kg IM12EC IM15EC IM2EC IM25EC IM31EC Model A B C D kg EM12EC EM15EC EM2EC EM25EC EM31EC EM ECs Page 42
17 AIR HANDLING UNITS ELECTRIC HEATER BATTERY OR LPH HEATING COIL 4 sizes super quiet - high performance acoustic lining integral trickle and boost, and isolator airflow to 1.35m 3 /sec double skinned galvanised steel cases with rockwool infill (standard for internal models, available for external) standard external models in galvanised steel, single skinned with plastisol exterior in light grey to BS1A5 access: side for internal models, top for external models complete with integral mounting points for either floor or ceiling mounting inlets and outlets fitted with "mez" type duct connecting flanges external unit air inlets protected by weatherproof cowl and bird guard direct drive single inlet, single width, backward curved centrifugal type fans motors with thermal overload protection fan blades statically and dynamically balanced in accordance with ISO 194/1 and balancing quality G6.3 electric heater batteries for 1ph and 3ph operation are manu factured from sheathed rod elements with an integral, manual reset thermal cut-out for wiring into control unit LPH batteries from copper tubes mechanically bonded to aluminium fins supplied with standard BSP male connections maximum air temperature 4ºC panel filters fitted into slide-in channels and manufactured from bonded and coated spun glass fibre to G3 grade, fitted as standard in easily removable housings manufactured in UK to ISO 91 energy efficient, environmentally friendly, economical EC motors - ErP Compliant SPE1 Max Air Volume (m 3 /sec) SP1 Max Air Volume (m 3 /sec) SPE4 SP4 SPE6 SP6 SPE7 SP
18 AIR HANDLING UNITS ELECTRIC HEATER BATTERY Technical Data - SPE/SRE1-ECs SFP - 1.5/L/S SFP - 1.2/L/S SFP - 1./L/S SFP -.8/L/S SFP -.6/L/S 1% 25 4% 6% SPE/SRE1-ECs 49 23V, 1Ph 3. SPE/SRE1-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db Inlet in duct db % Outlet in duct db % Inlet in duct db <2 Outlet in duct db Page 44
19 AIR HANDLING UNITS ELECTRIC HEATER BATTERY Technical Data - SPE/SRE4-ECs SFP /L/S SFP - 1.1/L/S SFP - 1./L/S SFP -.9/L/S SFP -.8/L/S 1 5 4% 6% 1% SPE/SRE4-ECs 51 23V, 1Ph 3.1 SPE/SRE4-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db Inlet in duct db % Outlet in duct db % Inlet in duct db <2 Outlet in duct db Page 45
20 AIR HANDLING UNITS ELECTRIC HEATER BATTERY Technical Data - SPE/SRE6-ECs 4 SFP - 1.5/L/S SFP -.8/L/S 35 SFP - 1.2/L/S SFP - 1./L/S SFP -.6/L/S 1 5 4% 6% 1% SPE/SRE6-ECs 45 23V, 1Ph 2.9 SPE/SRE6-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db % Inlet in duct db Outlet in duct db % Inlet in duct db <2 <2 Outlet in duct db Page 46
21 AIR HANDLING UNITS ELECTRIC HEATER BATTERY Technical Data - SPE/SRE7-ECs 4 35 SFP - 1.5/L/S SFP - 1.2/L/S SFP -.8/L/S 3 SFP - 1./L/S SFP -.6/L/S % 4% % SPE/SRE7-ECs 64 23V, 1Ph 2.9 SPE/SRE7-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db Inlet in duct db % Outlet in duct db % Inlet in duct db <2 <2 <2 Outlet in duct db Page 47
22 AIR HANDLING UNITS ELECTRIC HEATER BATTERY Dimensions - SPE/SRE-ECs SPE ECs Model A B C D E kg SPE1EC SPE4EC SPE6EC SPE7EC Model A B C D E kg SRE1EC SRE4EC SRE6EC SRE7EC SRE ECs Page 48
23 AIR HANDLING UNITS LPH HEATING COIL Technical Data - SP/SR1-ECs SFP - 1.2/L/S SFP -.6/L/S 35 SFP - 1./L/S SFP -.8/L/S SFP - 1.5/L/S % 6% 1% SP/SR1-ECs 49 23V, 1Ph 3. SP/SR1-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db Inlet in duct db % Outlet in duct db % Inlet in duct db <2 Outlet in duct db Page 49
24 AIR HANDLING UNITS LPH HEATING COIL Technical Data - SP/SR4-ECs SFP /L/S SFP - 1.1/L/S SFP - 1./L/S SFP -.9/L/S 1 SFP -.8/L/S 5 4% 6% 1% SP/SR4-ECs 51 23V, 1Ph 3.1 SP/SR4-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db % Inlet in duct db Outlet in duct db % Inlet in duct db <2 Outlet in duct db Page 5
25 AIR HANDLING UNITS LPH HEATING COIL Technical Data - SP/SR6ECs 4 35 SFP - 1.5/L/S SFP - 1.2/L/S SFP -.8/L/S SFP - 1./L/S SFP -.6/L/S 1 5 4% 6% 1% SP/SR6-ECs 45 23V, 1Ph 2.9 SP/SR6-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db Inlet in duct db % Outlet in duct db % Inlet in duct db <2 <2 Outlet in duct db Page 51
26 AIR HANDLING UNITS LPH HEATING COIL Technical Data - SP/SR7-EC 4 35 SFP - 1.5/L/S SFP - 1.2/L/S SFP -.8/L/S SFP - 1./L/S SFP -.6/L/S 1 5 4% 6% 1% SP/SR7-ECs 64 23V, 1Ph 2.9 SP/SR7-ECs k 2k 4k 8k db db(a) db(a) NR db(a) NR 1% Inlet in duct db Outlet in duct db Inlet in duct db Outlet in duct db % Inlet in duct db Outlet in duct db % Inlet in duct db <2 <2 <2 Outlet in duct db Page 52
27 AIR HANDLING UNITS LPH HEATING COIL Dimensions - LPH models SP ECs Model A B C D E kg SP1EC SP2EC SP3EC SP4EC SP5EC SP6EC SP7EC Model A B C D E kg SR1EC SR2EC SR3EC SR4EC SR5EC SR6EC SR7EC SR ECs Page 53
28 CONTROLLER, GRILLE AND DAMPER -1v Closed Loop Pressure Controller This unit is a PI controller for use with EC fans for maintaining constant pressure control. hen it is used with an appropriate differential pressure sensor, it maintains the pre-programmed pressure in ventilation systems by varying the fan speed in relation to the system pressure. Grilles These grilles can incorporate a wide variety of functions. ith various activation modes such as humidity, PIR, CO2 and VOC, the grilles can automatically adjust the level of ventilation according to the needs of the occupants. The airflow range can be set at installation to adapt to special requirements, or to compensate for lack of pressure. Commissioning is also facilitated by the presence of an integrated pressure plug allowing connection to a manometer. In-Line Damper In-line opposed blade dampers are available in a variety of sizes to suit the application. Dampers come with pre-fitted damper actuators. The damper actuators can be activated through a variety of sensors, including, but not limited to, the ancillaries listed on the next page. These dampers can be used in conjunction with the grilles shown above to create a complete system solution. Page 54
29 ANCILLIARIES - FOR TRICKLE BOOST OPERATION Dynamic Remote Humidistat This unit can be connected to an "Infinity" product so that it will automatically switch on when the percentage of humidity in the room reaches the (adjustable) pre-set level. The unit will continue to operate until the level of humidity falls below the pre-set level. Remote Passive Infra Red This unit can be connected to an "Infinity" product so that it will automatically switch on when the sensor detects the presence of a person in the room. The unit incorporates an over-run timer and will continue operating the fan for a (adjustable) pre-set length of time after the person has moved away from the range of the sensor. Thermostat This unit can be connected to an "Infinity" product so that it will automatically switch on when the temperature reaches the (adjustable) pre-set level. It will then continue to operate until the temperature falls back to that level. Air Quality Sensor This unit can be connected to an "Infinity" product so that it will automatically switch on when the sensor detects that the level of pollution has reached an unacceptable level (pre-set by the user). The product will then continue to operate until the pollution has been cleared and the atmosphere reaches an acceptable level. The AQS incorporates a switch for manual operation. Page 55
30 AIR VENT TECHNOLOGY LTD 56 Reith ay Portway Industrial Estate Andover Hhire SP1 3TY Tel: +44() Fax: +44() Certificate No: GB9455 Part of the Vectaire Group of Companies Air Vent Technology reserves the right to alter specifications as part of its policy of continuous development Mar216/INF1am E & O.E
Uniclass L7534. Manufacture controlled to ISO9001
CABINET & TWIN FANS FOR INDUSTRIAL / COMMERCIAL USE "ACFS" - Quiet Duct Centrifugal - Single Fan "DMTSQ" - Quiet Duct Centrifugal - Twin Fan "RMS" - Roof Centrifugal - Single Fan "RMTS" - Roof Centrifugal
Twin and Single Inline Fans. Offers a range of flexible installation and application options, including auto-changeover on the Twin range
Twin and Single Inline Fans Offers a range of flexible installation and application options, including auto-changeover on the Twin range 2 Version 3.1 Breathing Buildings Inline Box Fans Demand Control
Sentinel D-Box Twin Fan
Sentinel D-Box Twin Fan Duct Sizes mm Performance - Airflow.1 to 1.3m 3 /s, Pressure up to 65Pa Sentinel demand ventilation fan controller with lockable isolator Latest energy saving EC/DC motors Aluzinc
Ultra-quiet circular duct fans TD-SILENT ECOWATT Series
TD-SILENT ECOWATT - MODELS 5 to TD-SILENT ECOWATT - MODELS AND At 5% of full speed fan power consumption is reduced by 7% Low profile Mixed-flow fans with sound-absorbent insulation, extremely quiet, fan
PVHRU Max Quiet. Engineering Solutions. Packaged Void Heat Reclaim Unit. Acoustic Testing Laboratory College of Science & Technology
AIR HANDLERS LTD PVHRU Max Quiet Packaged Void Heat Reclaim Unit 1262 Acoustic Testing Laboratory College of Science & Technology Engineering Solutions The Company Air Handlers has been trading since May
CRH RANGE - TECHNICAL DATA CENTRIFUGAL ROOF FANS
ge 2 CENTRIFUGAL CRH RANGE - TECHNICAL ROOF DATA FANS FOR INDUSTRIAL / COMMERCIAL USE CRH - Horizontal Discharge CRV - Vertical Discharge CRL - Low Profile Uniclass L7534 Tel: +44 ()1494 522333 Fax: Vectaire
Versatility. Features. By installing the SILENT MV, you will never experience the disturbance of noisy ventilation again. Benefits
Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent insulation and manufactured with an adjustable
AHTW Compact. Heat Recovery Air Handling Unit. BIM & REVIT Engineering Solutions. Acoustic Testing Laboratory College of Science & Technology
HANDLERS LTD AHTW Compact Heat Recovery Air Handling Unit 1262 Acoustic Testing Laboratory College of Science & Technology BIM & REVIT Engineering Solutions The Company Air Handlers has been trading since
NEW Slimpak EC Box Fan (SLPT EC)
NEW Slimpak EC Box Fan (SLPT EC) Compact low profile design Duct Sizes 100 500mm Performance - Airflow 0.01 to 1.2m 3 /s, Pressure up to 650Pa Latest energy saving EC/DC motors Internal mounting IPX2 Manufactured
AHPHX Compact. Heat Recovery Air Handling Unit. BIM & REVIT Engineering Solutions. Acoustic Testing Laboratory College of Science & Technology
HANDLERS LTD AHPHX Compact Heat Recovery Air Handling Unit 1262 Acoustic Testing Laboratory College of Science & Technology BIM & REVIT Engineering Solutions The Company Air Handlers has been trading since
SILENT MV Ultra Quiet In-line Fans
Ultra Quiet In-line Fans 5 IP44 2 YEAR GUARANTEE Ultra quiet and low profile helicocentrifugal in-line fans suitable for a wide range of domestic and commercial applications. Fitted with sound absorbent
HRS. Very high efficiency heat recovery units. from 300 to m³/h >90 % WITH HIGH EFFICIENCY HEAT RECOUPERATOR
4 Lmf Clima 6 FERRARO GROUP HRS Very high efficiency heat recovery units WITH HIGH EFFICIENCY HEAT RECOUPERATOR from 3 to 4. m³/h Air-handling unit designed and manufactured for nonresidential applications,
Vent-Axia Roof Units Range Energy Recovery Ventilation (ERV) Range
CI/SfB (57.7) 1st Edition from Vent-Axia Vent-Axia Roof Units Range Energy Recovery Ventilation (ERV) Range Energy Recovery Ventilation (ERV) Range Building on the success of the Sentinel Totus 2 range
Sentinel D-Box Single Fan
Sentinel D-Box Single Fan Duct size to 5mm Performance - Airflow.1 to 1.6m 3 /s Pressure up to 65Pa Sentinel demand ventilation fan controller with lockable isolator Aluzinc contstruction suitable for
HIGH EFFICIENCY ROTARY WHEEL - HELPING TO SAVE ENERGY AND REDUCE CARBON EMISSIONS.
XBOXER THERMAL WHEEL HEAT RECOVERY UNITS HIGH EFFICIENCY ROTARY WHEEL - HELPING TO SAVE ENERGY AND REDUCE CARBON EMISSIONS. 118 029 2085 8200 XBOXER THERMAL WHEEL BENEFITS HIGH EFFICIENCY Up to 85% efficient
HRH. High efficiency heat recovery units. from 300 to m³/h >70 % WITH HIGH EFFICIENCY HEAT RECOUPERATOR
4 Lmf Clima 6 HRH High efficiency heat recovery units WITH HIGH EFFICIENCY HEAT RECOUPERATOR from 3 to 4.3 m³/h The HRH units have been designed for non-residential applications for which a forced and
QUIETSCROLL TWIN FAN RANGE
QUIETSCROLL TWIN FAN RANGE MOST COMPREHENSIVE RANGE OF TWIN FANS WITH INTEGRAL ENERGY- SAVING CONTROLS NUAIRE. FOR THE COMPLETE VENTILATION SOLUTION UK MADE QUIETSCROLL TWIN FANS QUIETSCROLL TWIN FAN RANGE
BRIZA 22 HYBRID HEATING & COOLING
BRIZA 22 HYBRID HEATING & COOLING Built-in Ceiling: BABC/BT BABC/FT Built-in Wall: BABW/BT BABW/BF BABW/FT BABW/FF INFO SHEET BRIZA 22 HYBRID, COMPACT FANCOIL With EC Greentech EBM-PAPST technology Europe
ACOUSTIC CABINET FANS FOR SUPPLY AIR APPLICATIONS CAIB/T PRO-REG Series
ACOUSTIC CABINET FANS FOR SULY AIR ALICATIONS CAIB/T RO-REG Series Introduction of fresh air to commercial offices and industrial kitchens. Acoustic cabinet fan in galvanised sheet steel with reinforced
HPR. Heat recovery units. from 700 to m³/h R410A HIGH EFFICIENCY WITH ENTHALPY EXCHANGER AND BUILT-IN HEAT PUMP SYSTEM
1 Lmf Clima 216 FERRARO GROUP HPR Heat recovery units HIGH EFFICIENCY WITH ENTHALPY EXCHANGER AND BUILT-IN HEAT PUMP SYSTEM from 7 to 23. m³/h Supporting structure in extruded aluminium profiles and curtain
1 AIR HANDLING UNIT TYPE AIR ACCESS 75
SUPPLY 1 AIR HANDLING UNIT TYPE AIR ACCESS 75 Location : EXTERNAL Position : SIDE BY SIDE SLIDING PANELS for COMPLETE ACCESSIBILITY MULTI SERVICE BULKHEAD for HYDRAULIC AND ELECTRICAL CONNECTIONS Self-supporting
Features: Concealed installation. Compact design. Available in electric, LPHW or ambient.
Features: Concealed installation. Compact design. Available in electric, LPHW or ambient. Grille can be supplied in a large range of colours. Energy saving controls option available. Application The Diffusion
Highline 260i EC Waterside Fan Coil Unit
Features: Electronically Commutated (EC) fan motor Specific Fan Power of 0.16 to 0.34 at NR Insignificant fan heat gain Designed to operate below NR at External Static Pressures of up to 50Pa Variable
Ocelot vertical fan coil unit
Ocelot vertical fan coil unit 250mm Deep vertical Waterside control Cased unit DUNHAM BUSH OCELOT VERTICAL CASED FAN COIL UNIT The Dunham Bush Ocelot fan coil unit is a fully cased vertical unit suitable
Modular Air Handling. Up to 3,500 Litres / sec. Low profile & Plant room application. Draft. Version. Second Edition A-. AirDesign 2015 AirDesign 2016
Modular Air Handling U n i t R a n g e Up to 3,500 Litres / sec Low profile & Plant room application AirDesign 2015 AirDesign 2016 Second Edition Draft Version A-. Air Design is a proud Australian based
ACOUSTIC CABINET FANS CVB / CVT Series
Cabinet fans manufactured from heavy gauge galvanised steel sheet and internally lined with melamine foam flame retardant acoustic insulation (M1). All models incorporate double inlet single phase direct-drive
Compact Design BB101 & 93
Acoustic Shield Natural Ventilation Acoustic Roof Vents Compact Design BB101 & 93 Standard / Twin Flow / Mixed Mode natural ventilation roof vents can be finished in any colour to compliment the architectural
INDEX. SUPER VENT By Beta Industrial. pages INTRODUCTION CONSTRUCTION PERFORMANCE CHART ACOUSTIC DATA CHART DIMENSION SHEET - SINGLE CABINET FANS
Cabinet Fan SV-1 INDEX INTRODUCTION CONSTRUCTION PERFORMANCE CHART ACOUSTIC DATA CHART pages 01 02 03 04 DIMENSION SHEET - SINGLE CABINET FANS DIMENSION SHEET - TWIN CABINET FANS PERFORMANCE GRAPH WIRING
IN-LINE CENTRIFUGAL DUCT FANS VT Series
IN-LINE CENTRIFUGAL DUCT FANS VT Series DESCRIPTION The VT series of circular in-line duct centrifugal fans consists of model variations within nominal model sizes of,,,,, and mm respectively. The VT range
IN-LINE CENTRIFUGAL FANS FOR INDUSTRIAL / COMMERCIAL USE
IN-LINE CENTRIFUGAL FANS FOR INDUSTRIAL / COMMERCIAL USE CIL - Centrifugal In-Line Fans SBAF - Slimbox Acoustic Fans ACF - Acoustic Cabinet Fans - Direct Drive ACFS - Super-Silent Acoustic Cabinet Fans
CENTRIFUGAL IN-LINE FANS VENT Series
Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a prewired wiring junction box and a robust mounting foot.
IN-LINE DUCT FANS MIXVENT-TD Fan Systems
IN-LINE DUCT FANS MIXVENT-TD Fan Systems NEW TD-EXTRACTOR KIT (see page 175) MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment
DIRECT-AIR ILB / ILT Series Rectangular duct fans
IN-LINE DUCT FAN Series Rectangular duct fans Range of in-line rectangular duct fan manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/impeller
ULTRA LOW ENERGY. VHR Void Series W/I/s TOTAL SFP Typical. Made in the UK. VHR Void Mounted Heat Recovery Units VHR PERFORMANCE OVERVIEW:
VHR Void Mounted Heat Recovery Units TM.72 W/I/s TOTAL SFP Typical General: Units shall be manufactured from high quality galvanized sheet steel with stainless steel drain trays, acoustic, non-hygroscopic
TD-SILENT Series (160 to 1000 models)
IN-LINE MIXED LOW DUT ANS ultra-quiet Series (1 to models) Low profile Mixed-flow fans with sound-absorbent insulation. Extremely quiet. ertified of Approval Noise Abatement Society (TD-3, TD-, TD-8 and
AC Commercial Fans Edition. ErP ready
AC Commercial Fans 213 Edition ErP ready AC Commercial Fans Axair Fans UK Ltd / 1782 34943 About Axair Fans UK Axair is an independent industrial fan manufacturer and distributor. What we offer : Application
RECTANGULAR EXTRACT FANS
RECTANGULAR EXTRACT FANS Wide duty range 0.05m 3 /sec to 3.2m 3 /sec Horizontal or vertical mounting Quick and easy to install VES EXTRACT FANS part of a complete range of innovative, flexible products
Roof Units. Specification. Construction. Performance. Impellers. Size range. Ancillary Equipment
Roof Extract Units Roof Units Specification The Flaktwoods Colchester range of roof extract units are designed to satisfy the consultants functional requirement for a direct drive fan unit of guaranteed
CODE MODEL 1RC9020 REC PRO 90 S RC9021 REC PRO 90 S RC9022 REC PRO 90 S RC9023 REC PRO 90 S
REC PRO 9S High efficiency Heat Recovery Units Non residential applications EFFICIENCY 9% Comply with ErP Directive 125/29/CE and EU Regulation 1253/214. Classification: Non Residential Ventilation Unit
ACOUSTIC CABINET FANS CVAB / CVAT Series
Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic insulation (M). All models
Features: Available in horizontal and vertical units
Features: Available in horizontal and vertical units Ideal for Shopping Malls, Retail Outlets and Office Receptions Can be supplied in a large range of colours and finishes Numerous mounting bracket arrangements
NEW. Wall controls. YFCN Fan Coil Units. Technical Guide - for internal distribution only
NEW Wall controls Fan Coil Units www.euroventcertification.com www.certiflash.com Technical Guide for internal distribution only CONTENTS Construction Page 4 s Page 5 Dimension, Weight, Water content Page
Shut-off dampers. Type AK-Ex. For low-leakage shut-off of volume flows in potentially. explosive atmospheres (ATEX) PD AK-Ex 1.
X X testregistrierung Shut-off dampers Type ATEX-compliant parts and units For low-leakage shut-off of volume flows in potentially explosive atmospheres (ATEX) Circular shut-off dampers for shutting off
VENT Series CENTRIFUGAL IN-LINE FANS VENT. In-Line duct fans. Mounting foot
CENTRIFUGAL IN-LINE FANS Series Range of in-line duct centrifugal fans, manufactured from high grade corrosion resistant pressed galvanised steel and supplied as standard with a pre-wired wiring junction
IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from to models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from to models).
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems
IN-LINE MIXED FLOW DUCT FANS MIXVENT-TD Fan Systems MIXVENT TD / MIXVENT TD-T MIXVENT TDx2 ACCESSORIES Description Range Construction The MIXVENT system has been designed to compliment the MIXVENT-TD range
Centrifugal performance characteristics with axial flow pattern: RADAX VAR
High pressure in-line mixed-flow fans RADAX VAR Centrifugal performance characteristics with axial flow pattern: RADAX VAR COMPACT PRESSURE-RESISTANT UNIVERSAL In their compact casing, the RADAX VAR impellers
Type AK-Ex FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX)
Homepage > Products > Control units > Shut-off and restriction > Shut-Off Devices > Type AK-Ex Type AK-Ex FOR LOW-LEAKAGE SHUT-OFF OF VOLUME FLOWS IN POTENTIALLY EXPLOSIVE ATMOSPHERES (ATEX) Circular shut-off
Cubic unit cooler. SKB semi-industrial range
Cubic unit cooler SKB semi-industrial range Heatcraft reserves itself the right to make changes at any time without preliminary notice - Photos non-contractual The SKB range is designed for commercial
Guide Specifications. General. Casing. Coil/Drain pan. Fan/Motor
Guide Specifications General CR-A series ducted concealed chilled water fan coil units have an air flow range from 45 to 3060 cubic meters per hour with a capacity range from kw up to 9 kw. The CR-A series
TD-MIXVENT Series IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT. In-Line duct fans
IN-LINE MIXED FLOW DUCT FANS Series Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester
Cubic unit cooler. SKB semi-industrial range
HFC W Glycol READY Cubic unit cooler SKB semi-industrial range Heatcraft reserves itself the right to make changes at any time without preliminary notice - Photos non-contractual The SKB range is designed
Chiller, Close control and Water terminals. Air Conditioning. Light Commercial, Commercial and Industrial
Chiller, Close control and Water terminals Air Conditioning Light Commercial, Commercial and Industrial Water Terminals 133 Water Terminals Fan coils & Cassette Centrifugal fan-coil SYSCOIL Ductable fan-coil
Cert. n 0545 Carisma CRC Fan Coil Unit The Ultra Quiet Fan Coil TECHNICAL GUIDE
Cert. n 0545 www.euroventcertification.com Carisma Fan Coil Unit The Ultra Quiet Fan Coil TECHNCAL GUDE Carisma CONTENTS Construction Page 4 s Page 5 Dimension, Weight, Water content Page 6 EUROENT certification
BRIZA EC 12 HYBRID. World s slimmest fan coil HEATING AND COOLING
World s slimmest fan coil wall and ceiling installation 2-or 4-Pipe system heating and / or cooling with or without enclosure easy installation 24VDC EC motor silent, powerful, economical, sustainable
Carisma The Ultra Quiet Fan Coil
Carisma The Ultra Quiet Fan Coil Air Conditioning Carisma / CRR Fan Coil Units Quality management systems SO 900 Cert. n 0545/4 www.euroventcertification.com www.certiflash.com CONTENTS Construction ()
MVF S.r.l. Via San Giovanni Bosco, Alessandria Tel Fax Web:
MV S.r.l. Via San Giovanni osco, 12-15121 Alessandria Tel. +39 131 68.73 - ax +39 131 56.334 Web: www.mvf.it -mail: info@mvf.it IN-LIN MIXD LOW DUT ANS ultra-quiet TD-SILNT Series TD-SILNT - MOD 16 TO
The Straight Way. Rectangular Cabinet Fan. Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and heating Products Tunnel Fans The Straight Way Rectangular Cabinet Fan Systemair India Pvt. Ltd. certifies that the Rectangular
IN-LINE MIXED FLOW DUCT FANS TD-MIXVENT Series
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 16 to 8 models) or with metal casing steel finished in a tough epoxy-polyester paint coating (from 1 to
VARYCONTROL VAV Dual Duct Terminal Boxes
5/2/B/3 VARYCONTROL VAV Dual Duct Terminal Boxes for variable volume systems Type TVM Trox (U.K.) Ltd Caxton Way GB-Thetford Norfolk IP24 3SQ Telephone +44 (0)1842 754545 Telefax +44 (0)1842 7051 www.troxuk.co.uk
MODULAR AIR HANDLING UNITS GAH SERIES
MODULAR AIR HANDLING UNITS GAH SERIES 15 Models with Air Flows from 2,250 Cu.m/hr upto 77,800 Cu.m/hr Suitable for both Standard and District Cooling Applications GAH-TC-10-13 CONTENTS Design 2 Various
Prepared By : Checked By : Approved By : Page 1 out of 6
Software Name Carrier AHU - Version 1.0, Patch R1.1X UNIT MODEL GENERAL SPECIFICATIONS GENERAL LOCATION / WEIGHT UNIT DIMENSION Configuration : Quick Selection Wizard Unit Orientation : Horizontal Box
product selection data Slim design Acoustic comfort 40% smaller footprint Drycoolers 09VE
product selection data Slim design Acoustic comfort 40% smaller footprint Drycoolers 09VE Translation of the original document N 20033, 03.2015 Drycoolers Use Drycoolers in this range are mainly designed
VAV TERMINAL BOXES TYPE: BA BT
Installation dimensions View inlet side View outlet side C G F E ø D A 65 ø8 B 25 Side view Top view 40 150 150 L1 Application ø D 150 Size operating range q (m 3 /h) Min. Max. Nom. 125 90 150-440 500
ROOFMASTER STEF-HT ROOF FAN
fire safety Air movement Roof Fans ROOFMASTER STEF-HT ROOF FAN» Technical CATALOGuE Contents ROOFMASTER STEF-HT...3 Performance Data...4 Performance Table...5 General description...6 Fan Chart-explanation
ROOF FAN ROOFMASTER STEC
AIR COMFORT AIR MOVEMENT ROOF FANS ROOF FAN ROOFMASTER STEC INSULATED VERSION» TECHNICAL CATALOGUE 2 STEC Roofmaster - Technical Catalogue CONTENTS GENERAL DESCRIPTION Application/specification... 3 Features...
Technical information
6-8 Application Rectangular NK and NL types are pressure-independent VAV and CAV air volume control terminals. The terminals are designed particularly for systems with large air volumes and duct sizes
AIR HANDLING UNITS. Customisable modular air handling unit, designed and built to suit your project requirements
AIR HANDLING UNITS Customisable modular air handling unit, designed and built to suit your project requirements PacAir Modular Air Handling Units by are customisable, designed and built for n, New Zealand
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet CHT 200 4T BS. Installed capacity
400ºC/2h centrifugal roof fans with horizontal or vertical air outlet : 400ºC/2h centrifugal roof fans with horizontal air outlet, hood in aluminium : 400ºC/2h centrifugal roof fans with vertical air outlet,
ErP POWERBOX EC FANS - ESTOC EC FEATURES ELECTRICAL SUPPLY TEMPERATURE RANGE SIZES FEATURES AND CONSTRUCTION PRODUCT CODE IMPELLER MOTOR
13 POWERBOX EC FANS - ESTOC EC FEATURES Sizes from 3 to 3 mm diameter Air flow up to.1 m 3 /s Static pressures up to Pa Controllable EC motors Multiple outlet orientations ELECTRICAL SUPPLY 22-2V/Hz/1f
BATHROOM EXTRACT FANS DECOR-100 Series
DECOR-1 Series Range of axial extractors with airflow rates of 1 m 3 /h, for connection to 1 mm diameter circular ducting. All the fans are manufactured from injection moulded plastic, fitted with neon
Mixed Flow Roof Fans (RMH)
Mixed Flow Roof Fans (RMH) Motors protected to IP44 Motor insulation Class B Maximum operating temperature 4 C Standard Thermal Overload Protection IP65 service isolator Bird guard included as standard
FAN POWERED TERMINAL UNITS
Benefits: Fan powered terminals are typically used for heating and cooling of perimeter zones. Operating cost savings can be achieved through the use of waste heat recovery from the ceiling plenum and
Roots Packaged Blower Units
Roots Packaged Blower Units Standard Blower and Exhaus SRB blower units and SRE exhauster units Each standard packaged blower or exhauster combines a Roots blower unit supplying oil-free air with an electric
CVAB / CVAT Series ACOUSTIC CABINET FANS CVAB / CVAT. Acoustic cabinet fans. Backward curved centrifugal impellers.
ACOUSTIC CABINET FANS Series Range of in-line cabinet fans, manufactured from galvanised steel sheet with double thickness side panels internally lined with 17 mm thickness of fireproof fibreglass acoustic
ITEC High Efficiency EC Twin Fan for convenient fitting and full control. Casing constructed from 1.6mm Galvanised sheet steel
ITEC High Efficiency EC Twin Fan for convenient fitting and full control Casing constructed from 1.6mm Galvanised sheet steel Circular spigot connection Inline for ease of fitting into duct system Single
Inside Front cover White
TUBE FAN Inside Front cover White INDEX INTRODUCTION PERFORMANCE GRAPHS TECHNICAL DATA DIMENSIONS pages - 3 - ACOUSTIC DATA - SOUND PRESSURE LEVEL ELECTRICAL DETAILS 3 4 Index back side white Introduction
42CET/ 42CED Series Chilled Water Fan Coil Unit Furred-in Ceiling Model 300 to 1400 cfm Electric heater option
42CET/ 42CED Series Chilled Water Fan Coil Unit Furred-in Ceiling Model 0 to 10 cfm Electric heater option 42DC/ 42DCD Series Chilled Water Fan Coil Unit Furred-in Ceiling Model 0 to 00 cfm Electric heater
BOX BLB Centrifugal Box Fan
Centrifugal Box Fan Select models available for next day delivery Product Overview 3 sizes from 260mm to 400mm Air volume flow rates up to 0.751m³/s Static pressures up to 733 Pa Suitable for operating
Resolair 64 and 68. Comfort air conditioning unit with highly efficient regenerative heat storage packages. AIR VOLUME FLOW: 3,900 23,100 m³/h
Comfort air conditioning unit with highly efficient regenerative heat storage packages 68 10 01 - simplified illustration Automatically selects the most economical operating mode! 64 and 68 AIR OLUME FLOW:
SLH 1202 to Air-to-Water Reverse Cycle Heat Pumps. With Screw Compressors. 261 to 775 kw. 287 to 853 kw
Air-to-Water Reverse Cycle Heat Pumps SLH 1202 to 3804 With Screw Compressors 261 to 775 kw 287 to 853 kw Technical Brochure TM SLH-A.2GB Date : November 2004 Supersedes : TM SLH-A.1GB/05.04 Design Features
something new in the air Technical Bulletin
something new in the air Technical Bulletin 2 Air Leaf 2 Air Leaf 3 Innova is a company operating in the renewable energy sector and develops advanced climatic comfort systems for every season. The technological
CAV controllers. Type EN-Ex. For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX)
X X testregistrierung CAV controllers Type Adjustment scale For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX) Rectangular, mechanical self-powered
VAV terminal units. Type TVM. For dual duct systems PD TVM 1
X X testregistrierung VAV terminal units Type Variant -S Rectangular connection on the room end For dual duct systems VAV dual duct terminal units for dual duct systems with variable volume flows in buildings
Chassis Access Fans Motors Speed Control Coils The Condensate Tray Insulation Spigots Controls Enclosure Control Valves Filters Rev A
Chassis panelwork is all In House manufactured from nominally 1.2mm Galvanised steel. Where at all possible, flanges are formed inward facing to prevent exposure to bare metal edges. Sufficient forms and
VKAP 100 MD/LD 3.0 Product version Motor power level (M higher power level, L lower power level) Diameter Product name. Guard grille.
Application Features Power supply Circular duct fans are used in low-to medium-pressure ducted systems. Fans are suitable for air supply or exhaust of residential buildings, warehouses, bathrooms, lavatories,
ROOFMASTER STEF-ATEX ROOF FAN
Air Comfort Air movement Roof fans ROOFMASTER STEF-ATEX ROOF FAN» Technical CATALOGuE 2 STEF-ATEX Roofmaster - Technical Catalogue Contents General description Application/specification... 3 Features...
I Fan Powered Terminal Unit
I Fan Powered Terminal Unit VARIABLE VOLUME PARALLEL FLOW Fan Powered Terminal Unit Variable volume parallel flow Product Overview Variable Volume/Parallel Flow Fan Powered Terminal Units Honeywell parallel
Uniclass L7534. Vectaire Ltd is a member of: ; Fan Manufacturers Association; Smoke Control Association; Residential Ventilation Association;
CENTRIFUGAL TWIN FANS FOR INDUSTRIAL / COMMERCIAL USE DMTSQ - Duct Mounted, Slimline, Quiet RMTS - Roof Mounted, Slimline DMT - Duct Mounted RMT - Roof Mounted Belt Driven "DMT" and "RMT" Uniclass L7534
Duct mounted fans. axial flow. Pacific HVAC Engineering Tel. Australia NZ
Duct mounted fans axial flow Pacific HVAC Engineering 215 www.pacifichvac.com Tel. Australia 13 733 833 NZ 8 1 326 6 5 4 3 2 1 5 1 15 2 7 6 5 4 3 2 1 3 2.5 2 1.5 1.5 1 15.5 1 1.5 2 2.5 3 3.5 Volume m 3
Kitchen exhaust fan GLEB
Kitchen exhaust fan GLEB Contents General description...3 Quick selection...5 Design description...5 Material and design...6 Fan impeller...6 Motor...6...6 Quality...6 Specification...6 Technical data
CONTRA ROTATING CASED AXIAL FANS TCBBx2 / TCBTx2 Series
Range of cylindrical cased axial fans fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester
CLASSIC SAX Window / Wall Mounted Axial Fan. Select models available for next day delivery
Window / Wall Mounted Axial Fan Select models available for next day delivery Product Overview 2 standard sizes 230mm and 305mm Air volume flow rates up to 0.53 m³/s Static pressures up to 80 Pa Suitable
KVA POWERHOUSE RANGE 1250 KVA 1700 KVA
KVA POWERHOUSE RANGE 1250 KVA 1700 KVA 50 hz Three phase 380-415 v Model Engine Alternator Manufacturing country of engine & alternator PRP Output ESP Output Kva Kw Kva 380v/400- Kw 415v 46TWG2A PI734B
VLH 504 to Air-to-Water Reverse Cycle Heat Pumps. 126 to 294 kw. 133 to 307 kw
Air-to-Water Reverse Cycle Heat Pumps VLH 504 to 1204 126 to 294 kw 133 to 307 kw Technical Brochure TM VLH-N.3GB Date : June 2005 Supersedes : TM VLH-N.2GB/07.04 Specifications Advantages Range extension
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Water terminals SYSCOIL. Centrifugal fan coil units
Fans Air Handling Units Air Distribution Products Fire Safety Air Curtains and Heating Products Water terminals SYSCOIL Centrifugal fan coil units SYSCOIL Fan coil units Compact, slim fan coil units. Available
UTA STANDARD. Ductable units. Range. Air handling unit with high available static pressure. NEW Eco-Design Filter. V3000 control Fresh air management
Ductable units NEW Eco-Design Filter Air handling unit with high available static pressure V3000 control Fresh air management The range of air handling units is designed for suspended ceiling heating and
Variable Air Volume Dampers
OVAV 2000 SERIES OPTIMA VAV DAMPERS Overview OPTIMA make Variable Air Volume (OVAV) box is a part of an Air Conditioning system. It is located inside the duct work. VAV Dampers are designed to control
NV series. Induction VAV air volume control terminals
NV series Induction VAV Description Table of contents Page Type designation 1 Technical data - General 2 - Specification 3 - Installation instruction 3 Model overview / dimensions 4-5 Sound data NVOAOOB...
Circular Box Fans - DAISHO EC Range DAISHO EC 125. Features. Electrical Supply. Product Code. Sizes 125, 150, 200, 250, 315, 450, 630 and 1000.
Circular Box Fans - DAISHO EC Range Features 125mm to 1mm Air flow 1,25 m 3 /h (3.5m 3 /s) Static pressures up to 125 Pa Maximum temperature range 6ºC Suitable for variable or constant pressure systems