Chemical content for LiPo battery

Transcription

1 Chemical content for LiPo battery Date: 8 th May 04 Item Construction Material 1 Anode LiCoO 2 PVDFAl 2 Cathode CCMCSBRCu 3 Separator PP/PE/PP 4 electrolyzing solution LiPF 6 5 Solder Tag Anode: AlPP/PE Cathode: NiPP/PE 6 Housing AlPP/PE Weitere Unterlagen sind hierzu nicht erhältlich bzw. beschaffbar!

2

3

4

5 Title Model Name Page Battery specification sheet GSP Polymer lithium ion battery 1 1. Foreword The foreword of this product specification instruction booklet is aims at polymer lithium ion battery GSP which our company produces to say, this product specification instruction booklet content for this battery technical specification 2. Name and Model 2.1 Name Polymer lithium ion battery 2.2 Model GSP Technical specification 3.1 Capacity 5100mAh 3.2 Charge Voltage 8.40V 3.3 Normal Voltage 7.2V at 0.2CmA 3.4 Charge Charges the voltage by the 0.5CmA constant electric current to achieve 8.4V Then charges the electric current by the constant voltage to be smaller than time 0.01CmA stops 3.5 Electric discharge black-out voltage 6.00V 3.6 Normal discharge Rapid discharge Discharges 6.00V by the 0.2CmA constant electric current Discharges 6.00V by the 1CmA constant electric current 3.7 Biggest discharging current Biggest charging current 1C 1C 3.8Cycle life More than500 times@0.2c charge and discharge 23 C 3.9 Application temperature Charge 0~ 45 Discharge -20~ Storage Temperature -20~ 45 Relative humidity 75% 3.11 Energy density Wh/L ~300 Wh/Kg ~ Weight(about) 220g 3.13 Internal resistancecharge <80mΩ 4.Outward appearance request The battery surface should the non- mechanical damage, the rust eclipse, the surface luminous is smooth, non- electrolyte revelation.

6 Title Model Name Page Battery specification sheet GSP Polymer lithium ion battery 2 5.Test mothod 5.1Test environment Unless additional instruction the production test was made at the temperature 15~25 and the humidity 45~85%RH 5.2Test instrument battery internal resistance test instrumentac1khzscaleprecision0.01gcallipersprecision0.02m 6.experiment method Test item Experiment Juge standard 6.1Battery outward appearance Eyeballing Non-objection and non-leak liquid 6.2 Size Callipers reference outward appearance chart 6.3 Weight(reference weight Scale 220g 6.4 Charge method CCCV CC- 0.2C ma (constant current constant voltage CV--8.4 Up to current is 0.01CmA 6.5 Open-circuit voltage Test within 1 hour after battery full charged >8.3V 6.6 Internal resistance Battery internal resistance test instrument AC 1kHz <80mΩ 6.7 Discharge capacity >5100mAh 6.8 Cycle life Charge:CCCV,CC- 0.2CmA, CV- 8.4V end current0.01cma 6.9The electrolyte divulges 6.10 Temperature characteristic Within 1 hour after battery full charged,constant current discharge at 0.5CmA untile ending voltage Discharged at 0.2CmA to 6.0V,the cycle of charge and discharge could repeat 500 times. After full charged, layed the battery at environment that the temperature is 40±2 and relative humidity is 80±5% 21 days. 1)After the battery full charged at the temperature 20±5,(1)put it to the low temperature box(-20±2) 18 hours,(2) put it to high temperature box(55±2) 2 hours,then discharged at constant current 0.5C untile the voltage is 6.00V. The 500th circulation battery discharge capacity is not smaller than the nominal capacity 80% The eye observation battery not leaks the electrolyte phenomenon The discharge capacity is not smaller 60% than 6.7The battery outward appearance does not have exceptionally

7 Title Model Name Page Battery specification sheet GSP Polymer lithium ion battery 3 Test item Experiment Judgment standard 6.11 Electric charge maintenance After the battery completely charges, under 20±5 the environment puts aside 28 day, then discharges 6.00V by the 0.2C constant electric current The discharge capacity is not smaller 85% than Charge and discharge characteristic Charge:CC/CV 8.4V, 0.2CmA,Up to current 0.01CmA Discharge:0.2CmA Up to voltage6.00v Temperature: Temperature characteristic Charge: CC/CV 8.4V 0.2CmA,Up to current 0.01CmA Discharge:0.2CmA Up to voltage6.00v 7.2 Circulation characteristicy 8. Battery size(bare battery) mm Charge:CC/CV 8.4V, 0.2CmA,cut-off current 0.01CmA Up to current Discharge:0.2CmA, cut-off voltage 6.00V Up to voltage 5

8 Page 1 of 3 MATERIAL SAFETY DATA SHEET Greatpower battery (H.K) Co., Ltd Unit 912, Tower A, Hung Hom Commercial Centre, Ma Tau Wai, Hung Hom, Kowloon, Hong Kong Date of Preparation: 20/05/2004 Telephone No.: , In case of emergency contact: REBECCA at Section I Product Identification Product Name: Model: Lithium Ion Battery Cylindrical and Prismatic Type Cells Chemical System: Lithium Ion Designated for Recharge: X Yes No Section II Composition / Information on Ingredients IMPORTANT NOTE: The battery cell should not be opened or exposed to heat because exposure to the following ingredients contained within could be harmful under some circumstances. Chemical Name CAS No. PEL TL V Lithium Cobaltate (LiCoO 2 ) None Established None Established Graphite (C) mg/m mg/m 3 (as dust) (as dust) Organic Solvent None Established None Established Lithium Salt None Established None Established Polyvynilidene difluoride (PVdF) None Established None Established Weight of lithium per cell: 0g Section III Physical Data Specific Gravity: (H 2 0=1): Melting Point: (ºC): Appearance and Odor: LiC :4.95, Graphite:2.09~2.2 LiC about 1130 C LiC is a black, odorless powder. C is a black, odorless powder. Organic solvent is a colorless or light yellow liquid. Lithium salt is a white, crystalline and odorless powder. The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation. GREATPOWER BATTERY. makes no warranty, expressed or implied, with respect to this information and disclaims all liabilities from reliance on it.

9 Page 2 of 3 Section IV Fire and Explosion Hazard Data Extinguishing Media: Flammable Limits: Special Fire Fighting Procedure: Water Not available In case of fire in an adjacent area, use water, CO 2 or dry chemical extinguishers if cells are packed in their original containers since the fuel of the fire is basically paper products. For bulk quantities of unpackaged cells use LITH-X (Graphite Base). In this case, do not use water. Section V - Reactivity Data Stability: Conditions to Avoid: Hazardous Decomposition or By-products: Hazardous polymerization will not occur. Stable Do not heat, disassemble or overcharge. N/A Section VI - Health Hazard Data Routes of Entry: Inhalation Yes Skin Yes Ingestion Yes Health Hazards (Acute and Chronic): These chemicals are contained in a sealed can. Risk of exposure occurs only if the battery is mechanically or electrically abused. The most likely risk is an acute exposure when the gas release vent works. Organic solvent has slight toxicity and can irritate skin and eyes. Lithium salt is irritating to skin, eyes and mucous membranes and should be avoided. Carcinogenicity: NTP: None IARC Monograph: None OSHA Regulated: None Medical Conditions Generally Aggravated by Exposure: An acute exposure will not generally aggravate any medical condition. Emergency and First Aid Procedures: In case of skin contact with contents of battery, flush immediately with water. For eye contact, flush with copious amounts of water for 15 minutes. Do not inhale leaked material. If irritation persists, get medical help. Section VII - Precautions for Safe Handling and Use Steps to be Taken in Case Material is Released or Spilled: The preferred response is to leave the area and allow the batteries to cool and the vapors to dissipate. Avoid skin and eye contact or inhalation of vapors. Remove spilled liquid with absorbent and incinerate. Waste Disposal Method: Dispose in accordance with appropriate regulations. Open cells should be treated as hazardous waste. The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation. GREATPOWER BATTERY. makes no warranty, expressed or implied, with respect to this information and disclaims all liabilities from reliance on it.

10 Page 3 of 3 Precautions to be Taken in Handling and Storing: Avoid mechanical or electrical abuse. Other Precautions: Batteries may explode or cause burns, if disassembled, crushed or exposed to fire or high temperatures. Do not short or install with incorrect polarity. Section VIII - Control Measure Respiratory Protection (Specify Type): Ventilation: Protective Gloves: Eye Protection: Other Protective Clothing or Equipment: Not necessary under conditions of normal use. Not necessary under conditions of normal use. Not necessary under conditions of normal use. Not necessary under conditions of normal use. Not necessary under conditions of normal use. Section IX - Recycling and Disposal GREATPOWER battery recycling. Lithium ion batteries are safe for disposal in the normal municipal waste stream since they are not defined by the federal government as hazardous waste. However, lithium ion batteries are recyclable. For information contact Kinsbursky Brothers Inc. at (800) or see their website at DO NOT INCINERATE or subject battery cells to temperatures in excess of 212 F. Such treatment can cause cell rupture. Section X - Transportation GREATPOWER sealed Lithium Ion batteries comply with all applicable shipping regulations as prescribed by industry and legal standards which includes compliance with the UN Recommendations on the Transport of Dangerous Goods; IATA Dangerous Goods Regulations, 44th Edition, 2003, Special Provisions A45, and applicable U.S. DOT regulations for the safe transport of Lithium Ion batteries. Each Sanyo cell or battery has been tested under provisions of the UN Manual of Tests and Criteria, Part III, Sub-section More information concerning shipping, testing, marking and packaging can be obtained from Labelmaster at The information and recommendations set forth are made in good faith and believed to be accurate as of the date of preparation. GREATPOWER BATTERY. makes no warranty, expressed or implied, with respect to this information and disclaims all liabilities from reliance on it.