LED Value Ceiling Light

Transcription

1 Product Lumen Watt. CCT Size 2W/ mm 2W/ mm 2W/ mm 20W/ mm 20W/ mm 20W/ mm 10W/ mm 10W/ mm 10W/ mm Product Benefit Easy to connect thanks to -PIN terminal block provided. Uniform illumination Direct connection to AC power supply thanks to integrated control gear Class I Luminaire for indoor use. Mercury-free and RoHS compliant Type of protection: IP20 Offers in different colors to fulfill different application needs. (000K/4000K/6500K) Lifetime: up to 15,000 h ( L70/B50) Best in Class color consistency: SDCM 6 Color Rendering: > 80 Beam angle: Typical values. All the technical parameters apply to the entire luminaire. In view of the complex manufacturing process for light emitting diodes, the typical values given above for the technical LED parameters are merely statistical values that do not necessarily correspond to the actual technical parameters of an individual product; individual products may vary from the typical values. 2 The average lifetime of LED Luminaire is defined as the number of hours when the light output of 50% of a large group of identical lamps goes below 70% of its initial luminous flux (L70B50, IEC62612).The lifetime is estimated at room temperature (25 C), free air burning, base up burning position and at rated voltage. 1

2 Product specifications Product description Lumen [lm] 1 Beam Angle Power [W] Color Voltage[V]/ Frequency[Hz] LEDVALUE CEILING 2W/ V5X1 OSRAM Warm-White LEDVALUE CEILING 2W/ V5X1 OSRAM Cool-White LEDVALUE CEILING 2W/ V5X1 OSRAM Daylight LEDVALUE CEILING 20W/ V5X1 OSRAM Warm-White LEDVALUE CEILING 20W/ V5X1 OSRAM Cool-White LEDVALUE CEILING 20W/ V5X1 OSRAM Daylight V 50 / 60 Hz LEDVALUE CEILING 10W/ V5X1 OSRAM Warm-White LEDVALUE CEILING 10W/ V5X1 OSRAM Cool-White LEDVALUE CEILING 10W/ V5X1 OSRAM Daylight Common Characteristics Product Type Average Lifetime Switching Cycles 2 Casing Material Starting Time Warm up time (For 60% light) 2W 20W 10W 15,000 hrs 100,000 PMMA <0.5s <0.5s 15,000 hrs 100,000 PMMA <0.5s <0.5s 15,000 hrs 100,000 PMMA <0.5s <0.5s Product Type Tc Temperature CRI Mercury Max. Lamp Current Inrush Current 2W 20W 10W 76 C > mg 166 ma 7.20 A 76 C > mg 152 ma 6.92 A 76 C > mg 82 ma 6.40 A The value of beam angle is based on C0/C180 average beam angle (50% Imax) The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 6201: ) 2

3 Mechanical & Electrical Specifications 10W 20W 2W The Tc is defined as the highest permissible temperature which may occur on the outer surface of the LED lamp (in the indicated position) under normal operating conditions and at the rated voltage/current/power or the maximum of the rated voltage/current/power range (DIN EN 6201: )

4 Installation Guideline 1. Disconnect mains power before assembly. 2. Remove the cover from fixture, and insert the power supply wires into the fixture pan through flexable rubber cable hole,then fix the pan on ceiling by screws.. Connect the Power supply wires to the Terminal block. 4. Twist the Fixture cover clockwise. 5. Turn the power switch back on to verify that the product is working properly. 4

5 Ordering guide Application: Warnings Product description IC EAN10 EAN40 LEDVALUE CEILING 2W/ V5X1 OSRAM AB M LEDVALUE CEILING 2W/ V5X1 OSRAM AB M LEDVALUE CEILING 2W/ V5X1 OSRAM AB M LEDVALUE CEILING 20W/ V5X1 OSRAM AB M LEDVALUE CEILING 20W/ V5X1 OSRAM AB M LEDVALUE CEILING 20W/ V5X1 OSRAM AB M LEDVALUE CEILING 10W/ V5X1 OSRAM AB M LEDVALUE CEILING 10W/ V5X1 OSRAM AB M LEDVALUE CEILING 10W/ V5X1 OSRAM AB M Home Use (Different Size product for Different room) Corridors Entrances Balcony This product must be installed by a licensed electrical contractor strictly in accordance with local wiring rules. Please avoid touching the LEDs. LED light module is not replaceable. Please contact qualified service personnel to perform the installation and replacement of the ceiling luminaire. Please do not attempt to disassemble or change the construction of the luminiare or replace any of the parts to avoid the possibility of injury or product failure. Please keep this manual for future reference. This product is designed for Indoor use only. It is not intended for installation in wet areas or where the location is exposed to the elements. This luminaire is designed for ceiling installation. Ambient Temperature is -20 C ~ +40 C (on free air). Storage Temperature is -20 C ~ +80 C. Shipping Unit 5

6 Lamp Conformity IEC : Luminaires Part 1: General requirements and tests IEC :Luminaires-Part 2:Particular requirements Section One - Fixed general purpose luminaires IEC :Lamp controlgear Part 1: General and safety requirements IEC :Lamp controlgear-part 2-1:Particular requirements for d.c. or a.c. supplied electronic controgear for LED modules IEC 6201:LED modules for general lighting - Safety specifications IEC 62471:Photobiological safety of lamps and lamp systems - Part 5: Image projectors IEC TR 62778:Application of IEC for the assessment of blue light hazard to light sources and luminaires IEC 6249:Assessment of lighting equipment related to human exposure to electromagnetic fields 6