Specification Manual HIGHBAY LED HIGHBAY SL80N4-KE-CRB(DC) SL80N4-KE-CRB(DF) SL80N4-KE-CRB(DW) Pre-Promotion Version_01

Size: px

Start display at page:

Download "Specification Manual HIGHBAY LED HIGHBAY SL80N4-KE-CRB(DC) SL80N4-KE-CRB(DF) SL80N4-KE-CRB(DW) Pre-Promotion Version_01"

Emory Parrish
5 years ago
Views:

LED HIGHBAY HIGHBAY Specification Manual Pre-Promotion

SL80N4-KE-CRB(DW) [Option] Dongbu Lightec Lumidas Lighting

1 LED HIGHBAY HIGHBAY Specification Manual Pre-Promotion Version_01 [Standard] SL80N4-KE-CRB(DC) SL80N4-KE-CRB(DF) SL80N4-KE-CRB(DW) [Option] Dongbu Lightec Lumidas Lighting Fixture 80W 5000K Copyright c 2015 Dongbu Lightec. All rights reserved. Unauthorized use, alteration, or copying of these materials is prohibited. The date presented in this manual is th e product of testing by Dongbu Lightec s testing equipment using the methodo logy Document Number Date of Registration PS-SL-80N4-EN

2 Table of Contents 1. Product Description 3 2. Drawings & Components 4 3. Products Type / Characteristics Naming Convention Electrical Characteristics & Size Photometric Characteristics & etc Illumination Data Polar Diagram Coefficients Of Utilization 9 5. Note in use and installation Warranty 12 LED HIGHBAY Specification Manual (SL80N4) 2

1. Product Description LumiDas 80W is High efficient and Eco-Friendly Luminaire which revolutionary reduce

LumiDas is designed with illumination uniformity and anti glare oriented technology to avoid eye fatigue or unduly

LumiDas meets Electrical safety thanks to integrated Surge Protection Circuit To prevent it from lightening.

72% compared to MH 250W Long life time over 50,000hrs thanks to effective heat dissipation system Revolutionary

integrated Easy to install by extremely light weight/ Ballast integrated Eco-friendly (No Mercury, no lead, no

3 1. Product Description LumiDas 80W is High efficient and Eco-Friendly Luminaire which revolutionary reduce Maintenance cost by saving electricity charge max. 72% compare to conventional luminaires and long life time. LumiDas is designed with illumination uniformity and anti glare oriented technology to avoid eye fatigue or unduly stressing out your eyes. LumiDas meets Electrical safety thanks to integrated Surge Protection Circuit To prevent it from lightening. Key Features High efficiency (130lm/W) Save electricity charge max.72% compared to MH 250W Long life time over 50,000hrs thanks to effective heat dissipation system Revolutionary reduction of glare thanks to differentiated engineering design and wide light distribution Surge protection circuit integrated Easy to install by extremely light weight/ Ballast integrated Eco-friendly (No Mercury, no lead, no cadmium, no UV) HEE certified Application, Big discount store, Ware house, Exhibition center In Door to replace HID luminaire. LED Products of Dongbulightec are contributing to various area in domestic Market and overseas to save energy for years. LED HIGHBAY Specification Manual (SL80N4) 3

4 2. Structural elements / Product components (Accessory) Model Code Name Height (mm) Dia. (Ø, mm) Weight (g) ACC-SL80N4-CPC1 Chain Pendant Bracket 54 Ø g ACC-SL80N4-WBW1 Wall Mount Bracket g ACC-SL80N4-PPC1 Pipe Pendant Bracket g ACC-SL80N4-SWA1 Fall prevention wire Set g ACC-SL80N4-SHP1 Secondary Reflector 77.6 Ø g ACC-SL80N4-DPP1 Pattern Cover 64.8 Ø g Chain Pendant Bracket Pipe Pendant Bracket Wall Mount Bracket Fall prevention wire Set Pattern Cover Secondary Reflector LED HIGHBAY Specification Manual (SL80N4) 4

5 2. Structural elements / Product components Basic Wall Mount Bracket Pipe Pendant Bracket Wall Mount Bracket LED HIGHBAY Specification Manual (SL80N4) 5

6 2. Structural elements / Product components Secondary Reflector Chain Pendant Bracket LED HIGHBAY Specification Manual (SL80N4) 6

7 3. Products Type / Characteristics 3.1. Naming Convention SL 80 N 4 - KE - C R B ( D C ) - K SL 80 N 4 - KE - C R B ( D F ) - K SL 80 N 4 - KE - C R B ( D W ) - K No. Division Description Others 1 Series SL : Super HighBay & Flood Light 2 Wattage 80 : 80W 3 Generation N4 : generation Input Voltage Mounting Type Bracket Type Convertor Type CCT KE : 200~240VAC C : Common Platform F : Fixed Type R : Rotation Type E : External Type B : Builit-in Type C : Compatible Type D : 5000K P : 5700K 9 Beam angle C : Clear Cover 110 F : Frosted Cover 100 W : Wide Flood Lens Option S : Secondary Reflector LED HIGHBAY Specification Manual (SL80N4) 7

8 3. Products Type / Characteristics 3.2. Electrical Characteristics / Size Model Power consumption (W) Input Vol. (Vac) Power Factor (PF) Freque ncy (Hz) Dia. (Ø ) Height (mm) Weight (Kg) IP SL80N4-KE -CRB(DC) SL80N4-KE -CRB(DF) SL80N4-KE -CRB(DW) >0.9 50/ IP >0.9 50/ IP >0.9 50/ IP65 1) Product Characteristics may vary slightly among products within tolerable ranges. These variations do not impact electrical safety Photometric Characteristics Model Beam Angle ( ) CCT (K) CRI (Ra) Luminous Flux (lm) Luminous Efficacy (lm/w) Life time (h) Operation Temperature (Warranted) ( ) Recommended Operation temperature ( ) Operation Humidity (%) SL80N4-KE -CRB(DC) >8 0 10, ,000-25~ ~ 95 SL80N4-KE -CRB(DF) >8 0 9, ,000-25~ ~ 95 SL80N4-KE -CRB(DW) >8 0 10, ,000-25~ ~ 95 2) 5000K : 4745~5311, Color Temperature may differ slightly from actual product performance within tolerable ranges. 3) Recommended operation temperature means the ambient temperature of the environment where the lamp is installed. When a lamp is used at the ambient operation temperature and relative humidity, an average warranted lifetime of the lamp is guaranteed. 4) The electrical and photometric characteristics are measured by Dongbu Lightec s testing equipments and methodologies. The provided test results may differ slightly from actual products performance within tolerable ranges. LED HIGHBAY Specification Manual (SL80N4) 8

4. Illumination Data 4.1. Polar Diagram Zone( ) Lumens Lamp (%) Luminaire (%) 0-30 2,988.00 28.40% 28.30% 0-40 4,942.80 47% 46.80% 0-60 8,812.30 83.70% 83.50% 60-90 1,739.50 16.50% 16.50% 0-90 10,551.

9 4. Illumination Data 4.1. Polar Diagram Zone( ) Lumens Lamp (%) Luminaire (%) , % 28.30% , % 46.80% , % 83.50% , % 16.50% , % 100% SL80N4-KE-CRB(DC) 4.2. Cone Diagram / Coefficients of Utilization Coefficients of Utilization(ZCM ) Effective Floor Cavity Reflectance: 20% RCC %: RW %: Result is measured on Center / Side at every 2m in 10m SL80N4-KE-CRB(DC) 1) Data used in the above IES file was measured at Dongbu Lightec s Photometric Analysis Center LED HIGHBAY Specification Manual (SL80N4) 9

10 5. Note in use and installation For your safety, Install or use after reading below Safety instruction carefully. : Warning : Caution 5.1. Note in installation If you do not follow installation guide strictly, it can cause serious wound or Death. If you do not follow installation guide strictly, it can cause serious wound or loss of Property. The power must be disconnected when installing or making adjustments. Before installing, check installation place for defects. After installation, be sure that luminaire looks sturdy. Make sure the input power is suitable for the luminaire. To prevent damage and / or external shocks, DO NOT allow sharp materials to came in to contact with the lamp surface. DO NOT expose luminaire or installation socket to direct heat. Make sure to have proper ground wiring to prevent unintentional short circuit / electrical leakage. DO NOT use the place which occurs serious corrosion by Gas, salt. DO NOT disassemble products to prevent unintentional electric shock or fire. Make sure not to contact Dimming control equipment, otherwise, it can be the root cause of malfunction and fire. KEEP the operation temperature (ambient temperature-25~50 ), to prevent reduction of life time and unintentional fire. When the lamp is installed in an enclosed space, the temperature of the lamp increases resulting in a shorter lifetime, If you wish to install the lamp in and enclosed space, please consult sales persons / customer service department. DO NOT apply pressure on main cable hardly, it can be the main cause of electric shock or fire. LED HIGHBAY Specification Manual (SL80N4) 10

11 5. Note in use and installation : Warning : Caution If you do not follow installation guide strictly, it can cause serious wound or Death. If you do not follow installation guide strictly, it can cause serious wound or loss of Property Note in use DO NOT disassemble products to prevent unintentional electric shock or fire. If you have problems of turning on lights, please remove the power supply and contact our customer service center. If the product is submerged, please isolate the power and contact the customer service center. This may cause electric shock or fire. If you sense the leakage of gas(public gas and propane gas), immediately power off and ventilate. DO NOT touch the power cord with wet hands, This may cause electric shock or fire. DO NOT insert other metal or foreign objects inside, This may cause personal injury or electric shock and fire. During and immediately after turning off the products will cause burns, if touched. When cleaning the product, turn the power off. When cleaning the product directly using a high-pressure washing liquid will cause the flooding. (LED luminaires IP rating: 65). DO NOT use chemical cleaners on the product DO NOT spray insecticides or flammable sprays, this may cause electric shock or fire and malfunction. If you do not use products for a long time without regular inspection, smoke or fire and electric shock could occur. If the product is damaged, turn the power off and contact our customer service center. LED HIGHBAY Specification Manual (SL80N4) 11

12 6. Warranty Warranty period 3 years from the date of purchase from an authorized retailer Warranty covers: Defects discovered while using the lamps under normal and recommended operating conditions during the warranty period. During the given warranty period, we will repairor exchange defective parts or products at no cost. Warranty does not cover: Defects that are discovered after the warranty period expires Defects that are caused by natural disasters and accidents Defects that are caused by negligent handling by users Negligent handling includes but is not limited to: Any unauthorized disassembly Any accidental impact or shock Negligent handling, moving and installing Installing in an improper place which is unable to sustain the weight of the lamp Installing into an excessive input voltage out of the designated input voltage range Loss of warranty or omission of required information on the warranty LED HIGHBAY Specification Manual (SL80N4) 12

13 Dongbu Lightec Co., Ltd. 14, Saneop-ro 104beon-gil, Oejong-gu Bucheon-si, Gyeonggi-do, Republic of Korea (zip) Tel: (Europe& Asia)/ ~4(USA) Fax: URL : Contents of this technical manual can e changed without notice.

LumiDas-D 6W Dimmable Lamp LED Integral Replacement Lamp Technical Manual

LumiDas-D 6W Dimmable Lamp LED Integral Replacement Lamp Technical Manual No. TM-DDL06-EN-001 Copyright c 2010 Fawoo Technology. All rights reserved. Unauthorized use, alteration, or copying of these materials