CONTENTS BY CHAPTER. Chapter 2: COMPANY EQUIPMENT ON CUSTOMER PREMISES
|
|
|
- Deborah Robyn Dean
- 5 years ago
- Views:
Transcription
1 CONTENTS BY CHAPTER Chapter 1: GENERAL INFORMATION Chapter 2: COMPANY EQUIPMENT ON CUSTOMER PREMISES Chapter 3: SERVICE ENTRANCES Chapter 4: METERING INSTALLATION Chapter 5: CUSTOMER-INSTALLED SERVICE POLE Section : OVERHEAD TEMPORARY SERVICE POLE Section : UNDERGROUND TEMPORARY SERVICE POLE Chapter 6: OVERHEAD SERVICES Chapter 7: UNDERGROUND SERVICES (RESIDENTIAL) Chapter 8: UNDERGROUND SERVICES (GENERAL SERVICE & MULTI-UNIT RESIDENTIAL) Chapter 9: MOBILE HOME SERVICES Chapter 10: SERVICE IMPAIRING EQUIPMENT REGULATIONS Chapter 11: CUSTOMER S STANDBY GENERATION INSTALLATIONS Chapter 12: NETWORK SERVICES See following pages for more content detail. Issue Date: December 19, 2016 CONTENTS PAGE 1
2 TABLE OF CONTENTS SECTION Chapter 1: GENERAL INFORMATION 1.01 PURPOSE 1.02 CONSULT WITH OPPD PHONE NUMBERS 1.03 GENERAL POLICY 1.04 CODES AND RULES 1.05 INSPECTIONS 1.06 CONTINUITY OF SERVICE 1.07 FREQUENCY AND SERVICE OPTIONS AVAILABLE SINGLE PHASE THREE PHASE, WYE THREE PHASE, DELTA, 3W THREE PHASE, DELTA, 4W OTHER SERVICES: PULSE METERING 6W TOTALIZED (NOT FOR NEW CONSTRUCTION) 5W TOTALIZED (SERVICE ELIMINATED; NOT FOR NEW CONSTRUCTION) 1.08 HIGHER VOLTAGES 1.09 LOAD ADDITIONS 1.10 SERVICE CONNECTIONS 1.11 CUSTOMER ATTACHMENTS PROHIBITED 1.12 RESALE OF ENERGY 1.13 SALE OF OPPD PROPERTY 1.14 DIGGERS HOTLINE 1.15 OPENING A NEW SERVICE ACCOUNT 2.01 GENERAL Chapter 2: COMPANY EQUIPMENT ON CUSTOMER PREMISES 2.02 ACCESS TO COMPANY EQUIPMENT Issue Date: December 19, 2016 CONTENTS PAGE 2
3 2.03 TAMPERING WITH METERS 2.04 TEMPORARY METERING ARRANGEMENTS 2.05 COORDINATION OF OPPD WORK WITH THE CUSTOMER Chapter 3: SERVICE ENTRANCES 3.01 POINT OF ENTRANCE GENERAL SERVICE RESIDENTIAL 3.02 OPPD INSTALLATION ACCESSIBLE METER LOCATION DEFINITIONS ONE BUILDING, ONE SERVICE 3.03 CUSTOMER INSTALLATION OVERHEAD RESIDENTIAL OR GENERAL SERVICE UNDERGROUND - RESIDENTIAL UNDERGROUND - GENERAL SERVICE DISCONNECT SEQUENCE 3.04 CAPACITY 3.05 IDENTIFICATION OF CONDUCTORS 3.06 FAULT CURRENT DUTY REQUIREMENT ONE AND TWO FAMILY DWELLINGS MULTI-PHASE AND RESIDENTIAL, OTHER THAN ONE-, TWO- OR THREE-FAMILY DWELLINGS 3.07 PHASE BALANCE REQUIREMENTS 3.08 LIGHTS-ON-POWER SERVICE 3.09 SERVICE IMPAIRMENT 3.10 GROUNDING OF METER ENCLOSURE SINGLE SOCKET METERING MULTIPLE SOCKET, METER CENTERS, AND INSTRUMENT METERING Chapter 4: METERING INSTALLATION 4.01 METERING SPECIFICATIONS METERING EQUIPMENT PICK-UP Issue Date: December 19, 2016 CONTENTS PAGE 3
4 GENERAL SERVICE, THREE PHASE GENERAL SERVICE, SINGLE PHASE RESIDENTIAL 4.02 CUSTOMER INSTALLATION METER SOCKETS SOCKET METERING DRAWINGS & DIMENSIONS 4.03 RESIDENTIAL SERVICE OVERHEAD SINGLE FAMILY, DUPLEX, OR THREE-PLEX DWELLINGS UNDERGROUND SINGLE FAMILY, DUPLEX, OR THREE-PLEX DWELLINGS 4.04 RESIDENTIAL/COMMERCIAL SERVICE - MULTIPLE OCCUPANCY RESIDENTIAL 4 DWELLING UNITS OR MORE COMMERCIAL 2 OR MORE UNITS 4.05 GROUPING OF METERS METER CENTERS 4.06 CUSTOMER INSTALLATION - GENERAL SERVICE METERING INSTRUMENT TRANSFORMERS INSTRUMENT TRANSFORMERS DRAWINGS CT CABINET CABINET MOUNTING MANUFACTURED SWITCHGEAR SIX MAIN RULE WIRING FOR INSTRUMENT TRANSFORMERS 4.07 CONNECTIONS SERVICE RISERS 4.08 METER LOCATIONS 4.09 MOUNTING UNDERGROUND, GENERAL SERVICE & ALL OVERHEAD UNDERGROUND, RESIDENTIAL 4.10 METER SEALS 4.11 CAPACITY 4.12 SEPARATION 4.13 IDENTIFICATION OF METERS BY LOCATION 4.14 METER JUMPERS Issue Date: December 19, 2016 CONTENTS PAGE 4
5 4.15 HIGH VOLTAGE METERING 4.16 BONDING METERING ENCLOSURES 5.01 GENERAL Chapter 5: CUSTOMER-INSTALLED SERVICE POLE SECTION : OVERHEAD TEMPORARY SERVICE POLE 5.02 SERVICE ENTRANCE CONDUCTORS 5.03 ATTACHMENT OF SERVICE DROPS 5.04 CONNECTIONS 5.05 CAPACITY 5.06 INDENTIFICATION OF CONDUCTORS 5.07 SERVICE POLE INSTALLATION 5.51 GENERAL SECTION : UNDERGROUND TEMPORARY SERVICE POLE 5.52 SERVICE ENTRANCE CONDUCTORS AND CONDUIT 5.53 WIRING 5.54 CAPACITY 5.55 SERVICE POLE INSTALLATION Chapter 6: OVERHEAD SERVICES 6.01 GENERAL ATTACHMENT MAINTENANCE OF METER LOOPS CLEARANCES OVER POOLS OTHER CLEARANCES ACCESSIBLE OVERHEAD POINT OF ATTACHMENT 6.02 SERVICE ENTRANCE CONDUCTORS CONDUIT RISER WIRES OUT OF WEATHERHEAD 6.03 ATTACHMENT OF SERVICE DROPS - RESIDENTIAL RESIDENTIAL ATTACHMENT TYPES 1. BOLT THROUGH VERTICAL EXTERIOR WALL Issue Date: December 19, 2016 CONTENTS PAGE 5
6 2. MAST-TYPE RISER REWIRED RESIDENCES METER-DISCONNECT COMBINATION ON AN EXISTING HOME WITH A NEW ADDITION HEIGHT AND STRENGTH OF ATTACHMENT 6.04 CONNECTIONS 6.05 IDENTIFICATION OF CONDUCTORS 6.06 SEPARATION OF METERED AND UNMETERED CONDUCTORS 6.07 MAXIMUM SERVICE DROP LENGTH 6.08 SERVICE MAST INSTALLATION RESIDENTIAL SOCKET AMP 120\240 VOLTS, SINGLE PHASE, 3 WIRE 6.09 WALL INSTALLATION RESIDENTIAL SOCKET FROM 100 TO 320 AMP 120\240 VOLTS SINGLE PHASE, 3 WIRE 6.10 OVERHEAD RESIDENTIAL & GENERAL SERVICE CT INSTALLATION 6.11 FREE-STANDING SUPPORT FOR OVERHEAD SERVICE BY CUSTOMER 6.12 GENERAL SERVICE 100 TO 320 AMP 1 PH SOCKET, MAST OR WALL INSTALLATION 6.13 GENERAL SERVICE AMP 3 PH SOCKET, MAST OR WALL INSTALLATION 6.14 GENERAL SERVICE 320 AMP 3 PH 4W 120/208V OVERHEAD AND UNDERGROUND SOCKET Chapter 7: UNDERGROUND SERVICES (RESIDENTIAL) 7.01 GENERAL METERING ON PADMOUNTED TRANSFORMER METER-DISCONNECT COMBINATION ON AN EXISTING HOME WITH A NEW ADDITION 7.02 SERVICE LATERAL REQUIREMENTS CONDUIT INSTALLATION EASEMENTS GRADE CHANGES RETAINING WALLS 7.03 CONNECTIONS Issue Date: December 19, 2016 CONTENTS PAGE 6
7 7.04 CLEARANCES CANTILEVERS BRICK LEDGE 7.05 UNDERGROUND SERVICE TO SINGLE OR DUPLEX METER SOCKET SINGLE PHASE AMPS, 240 VOLTS & UNDER 7.06 FREE-STANDING UNDERGROUND SERVICE ENTRANCE 100 THRU 200 AMPS, OR 320 AMP VOLTS & UNDER 7.07 UNDERGROUND SERVICE TO CT CABINET SINGLE PHASE, 400 THRU 800 AMP - 120/240 VOLTS 7.08 REQUIREMENTS FOR PRIMARY & SECONDARY CABLES & EQUIPMENT ON LARGE LOT RESIDENTIAL PRIVATE PROPERTY (ACREAGES) EASEMENT GRADE CHANGES RETAINING WALLS Chapter 8: UNDERGROUND SERVICES - GENERAL SERVICE AND MULTI-UNIT RESIDENTIAL 8.01 GENERAL SERVICE RISER PIPES 8.02 CONNECTIONS SECONDARY DIPS PADMOUNTS 8.03 CLEARANCES 8.04 UNDERGROUND SERVICE TO METER SOCKET 8.05 FREE-STANDING SUPPORT FOR UNDERGROUND SERVICE ENTRANCE 8.06 UNDERGROUND SERVICE TO CT CABINET 8.07 UNDERGROUND SECONDARY SERVED FROM OVERHEAD LIMITATIONS DISTANCE LIMITATIONS SIZE 8.08 PADMOUNT TRANSFORMER SERVICE PRIMARY DUCT & CONDUCTORS TRANSFORMER SLAB SINGLE PHASE THREE PHASE, 500KVA & SMALLER THREE PHASE, 750KVA & LARGER Issue Date: December 19, 2016 CONTENTS PAGE 7
8 SLAB INSPECTION SECONDARY CONDUITS & CABLES METERING ON THE TRANSFORMER GENERAL PADMOUNTED TRANSFORMER REQUIREMENTS 8.09 THREE PHASE PADMOUNTED TRANSFORMER WITH SEPARATE SECONDARY COMPARTMENT ADDING ON TO AN EXISTING SLAB SERVICE CONDUCTORS INSTRUMENT TRANSFORMER METERING ON TRANSFORMER 9.01 SCOPE 9.02 GENERAL Chapter 9: MOBILE HOME SERVICES 9.03 SINGLE CUSTOMER INSTALLATION - UNDERGROUND SERVICE 9.04 MOBILE HOME COURTS - UNDERGROUND SERVICE 9.06 MOBILE HOME UNDERGROUND PEDESTALS DEFINITION Chapter 10: SERVICE IMPARING EQUIPMENT REGULATIONS STANDARDS OF PERFORMANCE CUSTOMER RESPONSIBILITY WELDERS AND FURNACES RECTIFICATION PROCESSES Chapter 11: CUSTOMER'S STANDBY GENERATION INSTALLATIONS SCOPE NON-PARALLEL OPERATION (OPEN TRANSITION) SAFETY GENERATOR FREQUENCY AND VOLTAGE CONNECTION EMERGENCY STANDBY GENERATOR INSTALLATION Issue Date: December 19, 2016 CONTENTS PAGE 8
9 11.06 OPPD PROVIDED FARM DISCONNECT OR TRANSFER SERVICE PARALLEL OPERATION GENERAL Chapter 12: NETWORK SERVICES DOWNTOWN OMAHA AREA ONLY SERVICE ENTRANCE CONDUCTORS LUGS TEMPORARY OR UNMETERED SERVICES IDENTIFICATION OF CONDUCTORS SEPARATION OF SERVICE CONDUCTORS FROM OTHER CONDUCTORS REHAB OF EXISTING BUILDINGS Issue Date: December 19, 2016 CONTENTS PAGE 9
10 INDEX OF DRAWINGS: Chapter 1 * indicates NOT FOR NEW CONSTRUCTION SINGLE PHASE SOCKETS SINGLE PHASE INSTRUMENT TRANSFORMERS (CT S & PT S) THREE PHASE, 4 WIRE, WYE SOCKETS & CT S THREE PHASE, 3 WIRE, CLOSED DELTA SOCKETS THREE PHASE, 3 WIRE, CLOSED DELTA (CT S & PT S) THREE PHASE, 4 WIRE, CLOSED DELTA SOCKETS & CT S THREE PHASE, 3 WIRE, OPEN DELTA SOCKETS THREE PHASE, 4 WIRE, OPEN DELTA SOCKETS & CT S * 6 WIRE TOTALIZED SERVICE (NOT FOR NEW CONSTRUCTION) * 5 WIRE TOTALIZED SERVICE (NOT FOR NEW CONSTRUCTION) * 2 CKT TOTALIZED 3PH, 4W WYE (120/208V, 277/480V) * 2 CKT TOTALIZED 3PH, 4W DELTA (240V, 480V) PRIMARY METERING SINGLE PHASE (480V, 2400V) PRIMARY METERING 3 PH, 4W (13,800V) PRIMARY METERING 3 PH, 3W (4160V) Chapter 4 Socket Metering V 1PH 2W (1 KW MAXIMUM.) /240V 1PH 3W 150A OVERHEAD /240V 1PH 3W 200A OVERHEAD /240V 1PH 3W 200A UNDERGROUND /240V 1PH 3W 200A UNDERGROUND /240V 1PH 3W 320A OVERHEAD /240V 1PH 3W 320A UNDERGROUND * 240V 1PH 2W & 120/240V 1PH 3W TOTALIZED /480V 1PH 3W 200A OVERHEAD V 3PH 3W or 480V 3PH 3W 200A OVERHEAD * 480V 3PH 3W 200A OVERHEAD /240V 3PH 4W OVERHEAD /208V 3PH 4W or 277/480V 3PH 4W 200A OVERHEAD /208V 1PH 3W 150A OVERHEAD /208V 3PH 4W 320A OVERHEAD or UNDERGROUND OVERHEAD SERVICE, 2 TO 6 METERS UNDERGROUND SERVICE, 2 TO 6 METERS UNDERGROUND SERVICE, 2 TO 6 METERS Transformer Metering DIAGRAM I, II, & III (6 MAIN RULE) * 120/240V 1PH 3W A -base CT Issue Date: December 19, 2016 CONTENTS PAGE 10
11 /240V 1PH 3W socket CT * 120/240V 1PH 3W & 240V 3PH 3W 6W totalized A -base CT * 120/240V 1PH 3W & 240V 3PH 3W 6W totalized A -base CT kw * 120/240V 1PH 3W & 240V 3PH 3W 6W totalized A -base CT kw, kva * 120/240V 1PH 3W & 240V 3PH 3W 6W totalized A -base CT kw * 240V 3PH 3W delta A -base CT * 3PH 3W delta Metering * 3PH 3W delta A -base CT (240V, 480V, 2400V, or 13,800V) kw, kva * 3PH 3W delta socket CT (240V, 480V, 2400V, or 13,800V) kw, kva * 3PH 3W delta A -base CT (480V, 2400V, or 13,800V) kw, kva * 120/240/240V 3PH 4W A -base CT * 3PH 4W A -base CT (120/208V, 277/480V, 2400/4160V, or 7960/13,800V) PH 4W socket CT (120/208V, 277/480V, 2400/4160V, or 7960/13,800V) * 3PH 4W A -base CT (120/208V, 277/480V, 2400/4160V, or 7960/13,800V) kw, kva * 3PH 4W socket CT (120/208V, 277/480V, 2400/4160V, or 7960/13,800V) kw, kva * 3PH 4W A -base CT (120/208V, 277/480V, 2400/4160V, or 7960/13,800V) kw, kva 2 circuit totalized PH 4W delta CT (120/240/240V) Chapter OVERHEAD TEMPORARY SERVICE POLE OVERHEAD TEMPORARY SERVICE POLE 5.55 UNDERGROUND TEMPORARY SERVICE POST Chapter OVERHEAD RESIDENTIAL SERVICE: MAST INSTALLATION, SOCKET OVERHEAD RESIDENTIAL SERVICE: THREE-PLEX SOCKET-200A OVERHEAD RESIDENTIAL SERVICE: WALL INSTALLATION, SOCKET 6.10 INSTRUMENT TRANSFORMER METERING RESIDENTIAL & GENERAL SERVICE OVERHEAD Chapter CUSTOMER-INSTALLED DUCT UNDER RETAINING WALL DUCTED SERVICE REQUIREMENTS UNDERGROUND RESIDENTIAL SOCKET ON A CANTILEVER UNDERGROUND RESIDENTIAL SOCKET UNDER A CANTILEVER UNDERGROUND RESIDENTIAL SERVICE: 200 AMP SOCKET UNDERGROUND RESIDENTIAL SERVICE: 320 AMP SOCKET UNDERGROUND RESIDENTIAL SERVICE: DUPLEX SOCKET 7.06 UNDERGRD RESIDENTIAL SVCE: FREESTANDING METER SUPPORT 7.07 UNDERGRD RESIDENTIAL SVCE: CURRENT TRANSFORMER (CT) Issue Date: December 19, 2016 CONTENTS PAGE 11
12 Chapter UNDERGROUND SOCKET, GENERAL SERVICE: 200 AMP UNDERGROUND SOCKET, GENERAL SERVICE: 320 AMP 8.05 UNDERGROUND SOCKET, GENERAL SERVICE: FREESTANDING METER SUPPORT 8.06 UNDERGROUND, GENERAL SERVICE: INSTRUMENT TRANSFORMER METER SLAB DETAIL, 1PH PDMT TRANSFORMER. LOW PRO (25 TO 167 kva) SLAB DETAIL, 1PH PDMT TRANSFORMER, CONV. (25 TO 167 kva) SLAB DETAIL, 1PH PDMT TRANSFORMER, CONV. (250 & 333 kva) SLAB DETAIL, 3PH PADMOUNTED TRANSFORMER, (75 TO 500 kva) SLAB DETAIL, 3PH PDMT TRANSFORMER, (750 TO 1000 kva) SLAB DETAIL, 3PH PDMT TRANSFORMER, (1500, 2000, &2500 kva) CUSTOMER S CABLE PULL BOX INSTALLATION METERING EQUIPMENT ON 3PH TRANSFORMER (AEOT) x6 PRECAST MANHOLE TRANSFORMER AND SECONDARY CAB SLAB (750, 1000 kva) TRANSFORMER AND SECONDARY CAB SLAB (1500, 2000, 2500 kva) Chapter MOBILE HOME PARK SERVICE, UNDERGROUND, SINGLE METER MOBILE HOME PARK SERVICE, UNDERGROUND, DOUBLE METER 9.07* MOBILE HOME PARK SERVICE, OVERHEAD POLE. Chapter DETENT METERING Chapter NETWORK CABLE LIMITER INSTALLATION, 208V NETWORK CABLE LIMITER INSTALLATION, 480V. Issue Date: December 19, 2016 CONTENTS PAGE 12
GENERAL INFORMATION 1.01 PURPOSE
GENERAL INFORMATION 1.01 PURPOSE The purpose of this manual is to supply essential information to customers, employees, architects, engineers, contractors, and others concerned with electrical installations
TABLE OF CONTENTS. Important Notices Underground Plant Protection Information. Commercial/Industrial Information Sheet
DRAWING NUMBER INTRODUCTORY INFORMATION Important Notices Underground Plant Protection Information Code Clearances Commercial/Industrial Information Sheet Work Management Customer Projects Engineering
Metering and Service Installation:
Table of Contents 1. Metering Installation Requirements, General... 1 2. Type of Service... 2 3. Definitions... 2 4. Who Provides Metering Equipment?... 2 5. Establishment of Service... 2 6. Meter Access...
STOUGHTON UTILITIES ELECTRIC SERVICE RULES AND INFORMATION
CHAPTER 1 - GENERAL INFORMATION 100. Purpose 101. Codes and rules 102. Continuity of service 103. Frequency, Voltage, and Amperage Limitations 104. High voltages 105. Unusual capacity requirements 106.
Approved Meter Sockets and Cabinets
Single Unit Residential Guide 1 PHASE, 120/240 VOLT SERVICES SERVICE CAPACITY OWNED METERING (Metering sockets and cabinets are supplied by Customer). Outdoor meter mounting height is 1730 mm ( 5 8 ) to
Electric Service Rules
2017 Electric Service Rules GENERAL INFORMATION TEMPORARY SERVICES OVERHEAD SERVICES UNDERGROUND SERVICES DISTRIBUTED GENERATION METERING HUD MANUFACTURED HOMES FARM SERVICES UTILITY/CATV SERVICES PRIMARY
ELECTRIC SERVICE MANUAL
ELECTRIC SERVICE MANUAL Issued: November 2018 For the most current version of the Jo-Carroll Energy electric service manual please visit www.jocarroll.com TABLE OF CONTENTS Chapter 1. General Information...1
Meter Installation. -and- Padmount Transformer Guide
Meter Installation -and- Padmount Transformer Guide Feb. 2016 METERING REQUIREMENTS The following information shall be used as a guide for installing metering equipment. A self-contained meter has all
ELECTRIC SERVICE RULES DISTRIBUTED GENERATION Issued Jan 2016
DISTRIBUTED GENERATION CHAPTER 5 500. SCOPE This chapter includes distributed or customer-owned generation connected in parallel and operating with Alliant Energy s electric distribution system. For all
AMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
Requirements for Secondary Voltage Revenue Metering (750 V and less)
Requirements for Secondary Voltage Revenue Metering (750 V and less) To view the latest revision of this document go to: http://www.bchydro.com/ext/metering/ January 28, 2010 Copyright 2008 by BC Hydro.
7. Residential Single-Family and Duplex Buildings (Dwellings)
Sin g le -F a mily a n d Du p le x Bu ild in g s 2016 Electric Service Requirements, 2 nd Edition Section 7 Section 7 Residential Single-Family and Duplex Buildings (Dwellings) Directory Page 7.1 General
Customer Requirements Meter Socket Configurations
Application Information on meter socket configurations available from Tacoma Power. For enclosed meter pedestals, see standard C-MR-0020 Customer Requirements, Enclosed Meter Pedestal. General Requirements
Clark Public Utilities Commercial Electric Service Handbook. This page left blank intentionally.
This page left blank intentionally. 38 Chapter 4: Commercial Metering / January 2011 APPENDIX Glossary Approval Acceptable to the authority having jurisdiction. Associated equipment As related to metering
AGRICULTURAL UNDERGROUND SERVICE 500 HP OR LESS
Prepared by: ABB1 AGRICULTURAL UNDERGROUND SERVICE 500 HP OR LESS 05619 Asset Type: Electric Metering Function: Design and Construction Issued by: Lisseth Villareal (LDV2) Date: 07-31-15 Rev. #10: This
Associated equipment As related to metering equipment: such as the current transformers, CT wiring and test switches.
APPENDIX Glossary Approval Acceptable to the authority having jurisdiction. Assessor s Parcel Number (APN) Identifying number assigned by the county assessor s office to each taxable building lot in the
Customer Metering and Services Guide Revised: May 2017
Revised: May 2017 This document is an uncontrolled copy and may not be the most current copy. The most current copy is available at atcoelectric.com. This document is the property of ATCO Electric and
Revised: April 2018 ¹ SERVICE TO WIRELESS DEVICE ANTENNA ATTACHMENTS ON CUSTOMER SERVICE POLES (SHEET 1) CUSTOMER: 1. An overcurrent protective device including a disconnect switch shall
PEU reserves the right to determine all meter locations. Only authorized PEU personnel will determine this location.
I N T R O D U C T I O N - M-1 RIGHTS: PEU reserves the right to determine all meter locations. Only authorized PEU personnel will determine this location. NOTIFICATION: Customers planning to install or
7 Single Family Service
7 Single Family Service 7. General The location of the service entrance on the Customer s premises is an important consideration. For clearance and location information see section 5 (Clearances). Consult
Engineering Service Specifications. Commercial Single-Phase Current Transformer Metering Schemes
Engineering Service Specifications Commercial Single-Phase Current Transformer Metering Schemes Specifications for Commercial Underground Current Transformer Metering Requirements for a Single-Phase Customer
Section 6 Electric Metering: Residential
Section 6 Electric Metering: Residential 6.1. Scope This section provides specific information for residential metering that is not covered by the basic requirements in Section 5, Electric Metering: General.
PUBLIC UTILITY DISTRICT NO. 1 OF LEWIS COUNTY METERING SPECIFICATIONS
PUBLIC UTILITY DISTRICT NO. 1 OF LEWIS COUNTY METERING SPECIFICATIONS 1. General Metering Requirements a. Interpretation The District s metering requirements shall not be interpreted to conflict with the
Transmission & Distribution Glossary of Electrical Terms
Transmission & Distribution Glossary of Electrical s Breaker Panel Bushing Circuit Circuit Breaker Conductor Conduit Consumption Current Distribution Electricity (Static vs. Current) Electron Feeder The
CHAPTER 2 TYPES OF SERVICE AND VOLTAGES AVAILABLE 8 Types of Service and Nominal Voltage Furnished
Table of Contents Page CHAPTER 1 3 Purpose of Service Rules Code Compliance and Inspection Service Entrance Equipment Application for Service Increased Loads Continuity and Quality of Service Neutral Voltages
10. METERING General Requirements
10. METERING 10.1 General Requirements A. The Company will not supply service to a Customer whose wiring is designed for resale of electricity through submetering except for recreational campgrounds, marinas,
KIUC Service Installation Manual
KIUC Service Installation Manual Second Edition (November 2016) This manual provides the general requirements for electric service and metering for Kauaʻi Island Utility Cooperative ("KIUC") and is meant
Table of Contents. Electrical Service Requirements. 1. General Requirements
Table of Contents 1. General Requirements 1.1 General Definition.................................................... 1 1 1.2 Booklet Purpose and Organization....................................... 1-1
New Service. From... BARRON. Spooner Office: P.O. Box 261 Spooner, WI Barron Office: P.O. Box 40 Barron, WI
New Service Guidelines and Diagrams From... BARRON www.barronelectric.com email: janderson@barronelectric.com Barron Office: P.O. Box 40 Barron, WI 54812-0040 Spooner Office: P.O. Box 261 Spooner, WI 54801-0261
SECTION 300 OVERHEAD SERVICE
SECTION 300 OVERHEAD SERVICE 300.01 General Company provides, installs, and maintains service drop to point of delivery approved by Company. Customer provides point of attachment which is acceptable to
COMMERCIAL QUICK REFERENCE
COMMERCIAL QUICK REFERENCE PROVO CITY POWER STANDARDS ELECTRICAL ENGINEERING UPDATED: 2016 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTIFICATION. 18" MIN. OF TAIL. (NEUTRAL CONDUCTOR MUST BE WHITE OR
Electric Service Standards
VI - 1 of 17 VI. METERING EQUIPMENT A. Equipment Furnished and Installed by FPL FPL provides and installs, at its expense, adequate metering instruments to measure the electric service used by the Customer.
WPS SERVICE MANUAL. Section Amp and Smaller - Common
Revised 01/2017 Section 2 200 AMP AND SMALLER - COMMON Page 1 of 17 Section 2 200 Amp and Smaller - Common 2-0 General Metering Requirements... 2 2-1 Basic Calculations... 4 2-2 100-200 Amp Single-Phase
Approved Contractor Construction e-guide Residential Commercial
Approved Contractor Construction e-guide Residential Commercial Clark Public Utilities PO Box 8900 Vancouver, WA 98668 (PAGE 2) TABLE OF CONTENTS PAGE Trenching 3 Wire 8 Single-Phase Transformer Set 13
2016 METER SERVICES SPECIFICATION GUIDE
2016 METER SERVICES SPECIFICATION GUIDE 802.01.ST (10-16) CONTENTS Introduction 2 Disclaimers 2 LES contacts 3 Definitions 4 LES Meter Services department requirements for approval of connection to LES
ENTRANCE EQUIPMENT ER D PAGE 1 OF 5
PAGE 1 OF 5 USE: Requirements for entrance equipment. PREVIOUS REVISION 07-01-98 ORIGINATED 03-94 PREVIOUS NUMBER ER 100 (12-01-81) LATEST REVISION: Updated meter socket labeling specification and instrument
34.00 METERING GENERAL LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE
4. METERING GENERAL LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE 4.-4 4. SELF-CONTAINED METERING, SINGE-PHASE INSTALLATION DETAILS /4 VOLT SINGLE-PHASE UNDERGROUND RESIDENTIAL SERVICE AND METER
NEW SERVICE HANDBOOK COMMERCIAL & IRRIGATION SUPPLEMENT
NEW SERVICE HANDBOOK COMMERCIAL & IRRIGATION SUPPLEMENT Meter Installations There are three basic ways to measure electricity consumption: Small and medium services are metered directly using direct connect
RESIDENTIAL UNDERGROUND AND OVERHEAD SERVICE REQUIREMENTS SECTION II RESIDENTIAL UNDERGROUND AND OVERHEAD SERVICE REQUIREMENTS
SECTION II This section discusses the City of Palo Alto's requirements for establishing electric service to new or upgraded residential installations. The same requirements apply to both underground and
Pretest Module 24 Three-phase Service Entrance
Pretest Module 24 Three-phase Service Entrance 1. What is the most widely used three-phase service entrance system? 2. What are the three most common voltage combinations for three-phase, four-wire systems?
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
Electric Service Requirements & Guidelines
Electric Service Requirements & Guidelines Montana Service Area September 2011 NORTHWESTERN ENERGY Montana Service Area ELECTRIC SERVICE REQUIREMENTS AND GUIDELINES CONTENTS I. GENERAL INFORMATION 1.01
2. DEFINITIONS. 2.3 APPROVED Acceptable to the authority enforcing the National Electric Code
2. DEFINITIONS 2.1 ACCEPTABLE Acceptable to the Company. 2.2 ADVANCED METER A meter that is capable of remote reading, and is capable of storing electric consumption data at specified time intervals of
For Conduit Inspections
Underground Conduit Standards - Table of Content 5/8/2017 Section S22 Underground Conduit Standard Index: Description: 00 Table of Content 01 General Notes 02 Definition of Terms 03 Primary Riser Conduit
Installing or Rebuilding Your Electric Service
Installing or Rebuilding Your Electric Service 2 3 Contents Policies for New and Rebuilt Electric Service 2-4 Paperwork and fees...2 Five-year policy...3 Proposed route location and conditions...3 Construction
Pentahead bolts See note 2. Conduit run as specified. Company facility. Refer to drawing SS8.6-2 or SS8.6-3 STANDARD SERVICE INSTALLATION
PULL BOX F SECONDARY SYSTEM Typical grade Pentahead bolts See note 2 Conduit run as specified Plastic or fiberglass for grass areas or Polymer concrete for light duty areas (see notes 2, 3, & 4) Company
Electric Service Requirements
Electric Service Requirements for Residential & Commercial Service Committed to safely and economically provide reliable energy and other services which bring value to its membership. ELECTRIC SERVICE
ELECTRIC DIVISION RULES AND PROCEDURES FOR ELECTRIC SERVICE
Public Works and Utilities 1250 N. Highland St. Mount Dora, FL 32757 352-735-7151 ext. 1805 Fax: 352-735-1539 E-mail: publicworks@cityofmountdora.com ELECTRIC DIVISION RULES AND PROCEDURES FOR ELECTRIC
Volume 2 Charts, Formulas, and Other Useful Information
Volume 2 Charts, Formulas, and Other Useful Information Aluminum Conductor Conductor Terminations 61 Compact Aluminum (Conduit Fill Tables) 68-79 Ampacity Dwelling Services 48 1-phase Loads on a 3-phase
The information found in this document are general guidelines that may be used to aid in the preparation of your service request proposal.
The information found in this document are general guidelines that may be used to aid in the preparation of your service request proposal. Please be advised that depending on the specific needs and actual
D9-3. No. WIRING DIAGRAM CONNECTIONS FOR UNDERGROUND SELF CONTAINED METERS JRH JED krich95 LINE LINE ABCN SOURCE SOURCE GROUND GROUND STUD STUD SOURCE
SOURCE 20V 240V STUD (PER NEC) A customer supplied and installed teaser wire is required from the neutral lug to a 5th terminal mounted on the left side of the meter block between the line and load terminals.
UNDERGROUND SERVICES - SECONDARY
UNDERGROUND SERVICES - SECONDARY Contents - Underground Services... U-1 General Requirements for Underground Service...U-2 Names of Parts for Underground Service... U-3 Service Termination in a Service
RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS SECTION VI RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS
SECTION VI SERVICE REQUIREMENTS This section discusses the requirements for establishing electric service to new residential subdivisions in Palo Alto. Subdivisions are normally constructed on dedicated
Marshfield Utilities Rules for Electric Service Installations. Table of Contents
ELECTRIC SERVICE MANUAL 2018 Marshfield Utilities Rules for Electric Service Installations Table of Contents Section Topic Page Table of Contents... I Mission and Vision Statements... VII Introduction
SECTION 500 METERING AND ASSOCIATED EQUIPMENT
SECTION 500 METERING AND ASSOCIATED EQUIPMENT 500.0 General Meter sockets shall be provided, installed and maintained by Customer. When the ratings of meter sockets are exceeded, transockets shall be used.
SERVICE REQUIREMENTS COMMERCIAL & INDUSTRIAL CUSTOMERS
ENERGY SERVICES ENGINEERING 840 Northgate Drive Telephone (509) 942-7403 Fax (509) 942-7405 P.O. Box 190 Richland, WA 99352 www.ci.richland.wa.us SERVICE REQUIREMENTS COMMERCIAL & INDUSTRIAL CUSTOMERS
ELECTRIC POLICY INTRODUCTION CHAPTER I GENERAL
INTRODUCTION This policy has been adopted by the Board of Public Works as a guide to obtaining electric service and to set forth the services available, conditions for service, and standards for materials
Western Section 101 st Annual Meeting Hot Springs, Arkansas September 21, 2005 Charlie Trout Code Breakfast
Western Section 101 st Annual Meeting Hot Springs, Arkansas September 21, 2005 Charlie Trout Code Breakfast 1.Question: An add on unit for a hydromassage bathtub consists of a small 1-gallon water heater
10 Commercial, Industrial, Agricultural Services
10 Commercial, Industrial, Agricultural Services This section describes the Power Company requirements for commercial, industrial, and agricultural services. This section covers single phase and three
ELECTRICAL METERING RESIDENTIAL
ELECTRICAL METERING RESIDENTIAL 1.0 INDEX 1.0 INDEX 2.0 SCOPE 3.0 GENERAL REQUIREMENTS 4.0 UNDERGROUND FED METER SOCKET (226-320 AMPS) 5.0 METER SOCKET (0-320 AMPS, 120/208V) 6.0 UNDERGROUND SERVICE W/CURRENT
SINGLE PHASE WIRING SPECIFICATIONS
SINGLE PHASE WIRING SPECIFICATIONS 1-866-MEC-ELEC (1-866-632-3532) Office Locations: Hondo Office 237 Hwy 173 N Hondo, TX 78661-0370 Fax 830.426.3335 Dilley Office 1718 W. FM 117 Dilley, TX 78017 Fax 830.965.1425
CHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION Installing new electric service is a joint project between the customer and the power company. The power company is responsible for bringing power to the site, for installing the
THREE PHASE WIRING SPECIFICATIONS
THREE PHASE WIRING SPECIFICATIONS 1-866-MEC-ELEC (1-866-632-3532) Office Locations: Hondo Office 237 Hwy 173 N Hondo, TX 78661-0370 Fax 830.426.3335 Dilley Office 1718 W. FM 117 Dilley, TX 78017 Fax 830.965.1425
Corrections most seen on plan review October 18, 2017 David Rankin Seattle Department of Construction and Inspections
Corrections most seen on plan review October 18, 2017 David Rankin Seattle Department of Construction and Inspections One-Line / Riser Diagrams Drawings are not reviewed prior to submission. Because of
Electric Service Guidelines TSN
Electric Service Guidelines TSN 449260 May 2017 Important Notice Regarding Removal of Oncor Electric Delivery Company LLC Meters to Perform Work on Customer s Premise Effective October 15, 2013, as provided
CHAPTER V RESIDENTIAL WIRING
CHAPTER V RESIDENTIAL WIRING 5.1. THE SERVICE ENTRANCE Buildings and other structures receive the electrical energy through the service entrance. In residential wiring, the electric company supply this
BUSINESS PROCEDURE. January 1, 2015
PURPOSE To provide uniform charges and standard estimating unit charges for electric supply and service to all classes of customers as required and supported by other NB policies. SCOPE This pricing policy
ELECTRIC SERVICE REQUIREMENTS
ELECTRIC SERVICE REQUIREMENTS Single-Family and Duplex Dwelling Connection Checklist A customer building a new single-family or duplex dwelling and connecting to the Power Company s electrical system may
Commercial Electric Service Handbook
Commercial Electric Service Handbook January 2011 CONTACTS Clark Public Utilities: Website........................................... www.clarkpublicutilities.com Construction Services department (To initiate
ELECTRIC SERVICE MANUAL
ELECTRIC SERVICE Revised December 2017 You can access this manual on the www.ameren.com/servicemanual Note: Updates to this manual will be made on a regular basis and posted at the website mentioned above.
90.2 Scope. The installation of electrical conductors, equipment and raceways for:
NEC Generator Primer Rules on the installation of generators and transfer switches 1 90.2 Scope The installation of electrical conductors, equipment and raceways for: public and private premises Conductors
Meter Standards COMMERCIAL. Metering Guidelines for Electric Service. March 28, 2014
Meter Standards COMMERCIAL Metering Guidelines for Electric Service March 28, 2014 13315 Goodnough Drive NW Gig Harbor WA 98332-8640 Phone (253) 857-1547 Fax (253) 857-1557 www.penlight.org Commercial
Standards for Electric Meter Installation and Use
UPDATED MARCH 2016 Align mark to the right with Standards for Electric Meter Installation and Use Contents FOREWORD...1 EXCEPTION/REVISION FORM... 3 SECTION 1: DEFINITIONS... 5 SECTION 2: GENERAL INFORMATION...
9. Non-Residential Services (Commercial, Industrial, and Agricultural)
Section 9 2016 Electric Service Requirements, 3rd Edition Section 9 Non-Residential Services Directory Page 9.1 General Requirements 68 9.2 Direct-Connect Metering, Single Installations 69 9.3 Direct-Connect
SOUTHWEST LOUISIANA ELECTRIC MEMBERSHIP COORPORATION COMMERCIAL SERVICE REQUIREMENTS
SOUTHWEST LOUISIANA ELECTRIC MEMBERSHIP COORPORATION COMMERCIAL SERVICE REQUIREMENTS November 17, 2016 Engineering Service Specifications Table of Contents Commercial Service Requirements SLEMCO Commercial
Service Requirements
Service Requirements General Contact Idaho Power before beginning work on any new service. All meter installations must meet current electrical code requirements and display the proper electrical permit.
Service Requirements
Service Requirements General Contact Idaho Power before beginning work on any new service. All meter installations must meet current electrical code requirements and display the proper electrical permit.
RIVER FALLS MUNICIPAL UTILITIES ELECTRIC SERVICE MANUAL
RIVER FALLS MUNICIPAL UTILITIES ELECTRIC SERVICE MANUAL PURPOSE This Electric Service Manual is published for the convenience of River Falls Municipal Utilities (RFMU) customers, electricians, architects
Published 2018 RULES AND REGULATIONS FOR ELECTRIC SERVICE
Published 2018 RULES AND REGULATIONS FOR ELECTRIC SERVICE TABLE OF CONTENTS Page No. SECTION I INTRODUCTION 1 A. PURPOSE 1 B. SCOPE 1 C. CORPORATION 1 D. CODES 1 E. RESPONSIBILITY 1 F. INSPECTION 2 G.
ROCHESTER PUBLIC UTILITIES
ROCHESTER PUBLIC UTILITIES ELECTRIC SERVICE RULES AND REGULATIONS Revised August 2011 INTRODUCTION Rochester Public Utilities (hereafter referred to as RPU) has assembled this booklet to assist its customers
THE XCEL ENERGY STANDARD FOR ELECTRIC INSTALLATION AND USE
Effective Date: March 1, 2008 THE XCEL ENERGY STANDARD FOR ELECTRIC INSTALLATION AND USE Effective Date: March 1, 2008 Table of Contents Introduction...3 Foreword...4 Exception Form..... 5 Revision Form...6
ELECTRIC SERVICE RULES UTILITY/CATV SERVICES Issued Jan 2016
UTILITY/CATV SERVICES CHAPTER 9 900. GENERAL A. Alliant Energy receives many requests for electric service from other utilities; telephone, telecommunications companies, cable television, the Department
TEMPORARY SERVICE TABLE OF CONTENTS PUD SERVICE TERRITORY AND CONTACTS CHAPTER ONE - INTRODUCTION CHAPTER TWO - TEMPORARY OVERHEAD SERVICE
Electrical Service Requirements TEMPORARY SERVICE TABLE OF CONTENTS PUD SERVICE TERRITORY AND CONTACTS CHAPTER ONE - INTRODUCTION Inspections and codes Underground Utility locates Meter socket requirements
All territory within the incorporated limits of the City and land owned or leased by the City.
A. APPLICABILITY: This schedule applies to all connections, expansions, and upgrades to the City's Electric Distribution System except those that serve street lighting or traffic signals. B. TERRITORY:
RESIDENTIAL. Metering Guidelines for Electric Service. Meter Standards. October 25, 2017
Meter Standards RESIDENTIAL Metering Guidelines for Electric Service October 25, 2017 13315 Goodnough Drive NW Gig Harbor WA 98332-8640 Phone (253) 857-1547 Fax (253) 857-1557 www.penlight.org Residential
Electric & Gas Service Requirements (Greenbook) Overview
INTRODUCTION The Greenbook contents and standard documents are updated regularly to provide users with the most current information possible. In conjunction with this effort, the 2016 Greenbook was reviewed
REQUIREMENTS FOR A RESIDENTIAL STRUCTURE TO BE CONSIDERED A PERMANENT INSTALLATION
REVISIONS (Note: All pages have been renumbered) Section 2.0 DEFINITIONS Removed the reference to the State of Ohio in the definition of COMPANY and also removed the reference to the State of Ohio throughout
Brantford Power Inc. METERING SPECIFICATION Page 1
Brantford Power Inc. METERING SPECIFICATION Page 1 BRANTFORD POWER INC. CONTACT NUMBERS... 1 SCOPE OF METERING SPECIFICATION... 2 GENERAL REQUIREMENTS FOR INSTALLATIONS... 2 METER SOCKET REQUIREMENTS LOAD
Electric Service Guides 2017
Electric Service Guides 2017 Electric Service Guide Residential January 1, 2017 Contact MID s Electric Engineering Department (electric.standards@mid.org) with any questions about this Service Guide.
Electric Service Requirements
Electric Service Requirements Section V Commercial Industrial July 2007 ENGINEERING SPECIFICATION 620 S Street, P.O. Box 5830, Sacramento, CA 95852-830 The Power To Do More ṢM SM A registered service mark
SPECIFICATIONS FOR RESIDENTIAL CONSTRUCTION
Roseville Electric SPECIFICATIONS FOR RESIDENTIAL CONSTRUCTION REVISED 10/03/17 Specifications for Residential Construction Revision List REVISION Date Page No. Description 8/18/09 T.O.C., 8.1-8.1.5 &
ELECTRIC SERVICE HANDBOOK INFORMATION & REQUIREMENTS
ELECTRIC SERVICE HANDBOOK INFORMATION & REQUIREMENTS 2012 EDITION PASCOAG UTILITY DISTRICT ELECTRIC COMPANY 253 Pascoag Main Street Pascoag, RI 02859 PO. BOX 107 TROUBLE AND EMERGENCY ONLY 568-6222 MAIN
3.1 Overview of ATCO Electric s URD System Design
Page: 3-1 3.0 URD DESIGN GUIDELINES 3.1 Overview of ATCO Electric s URD System Design The power supply to all single lot underground residential services is through front lot service. Single phase transformers
Portland General Electric. Electric Service Requirements 2018
Portland General Electric 2018 January 2018 Copyright 2018 by Portland General Electric. All rights reserved. No part of this publication may be reproduced without the written permission of Portland General
Commercial Electric Policy
Commercial Electric Policy 7/19/16 1 Table of Contents General Information..3 Construction.3 Ownership.4 Multi-Unit/Multi-Service Buildings....4 Secondary Termination Enclosures.4 Meter Bases.5 Temporary
Parkland Light & Water Co. ELECTRIC SERVICE REQUEST AND METER STANDARDS
Parkland Light & Water Co. ELECTRIC SERVICE REQUEST AND METER STANDARDS Revised: January, 2017 Contents SERVICE REQUEST FORMS RECEIPT OF ELECTRIC SERVICE REQUEST AND METER STANDARDS ELECTRIC SERVICE REQUEST
TECHNICAL TERMS AND ABBREVIATIONS. Alternating Current An electric current that reverses its direction at regularly recurring intervals.
FOURTH REVISED SHEET NO. 4.010 CANCELS THIRD REVISED SHEET NO. 4.010 TECHNICAL TERMS AND ABBREVIATIONS Alternating Current An electric current that reverses its direction at regularly recurring intervals.
Brantford Power Inc. METERING SPECIFICATION Page 1
Brantford Power Inc. METERING SPECIFICATION Page 1 BRANTFORD POWER INC. CONTACT NUMBERS... 1 SCOPE OF METERING SPECIFICATION... 2 METER SOCKET REQUIREMENTS LOAD METERS... 2 120/240V, single phase loads,
INTERMOUNTAIN RURAL ELECTRIC ASSOCIATION. Builder/Developer Information
INTERMOUNTAIN RURAL ELECTRIC ASSOCIATION Builder/Developer Information Revised October 2015 WELCOME TO INTERMOUNTAIN RURAL ELECTRIC ASSOCIATION We understand that obtaining electrical facilities is only
Commercial & Industrial
The Empire District Electric Company Requirements For Electric Service And Meter Installations Commercial & Industrial (800) 206 2300 The latest revision of this book can be found at www.empiredistrict.com