Specification Approval Sheet

Size: px
Start display at page:

Download "Specification Approval Sheet"

Transcription

1 Specification Approval Sheet Name: Tenergy Lithium-ion Polymer Pack Model: SPECS: 3.7V 250mAh LiPo with PCM and Bare Leads Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A.

2 1. Version Control Amendment Record Revision Date Mark Modified content Approved by A / NEW RELEASE / 2014 Tenergy Corporation. All rights reserved. Page 2 of 9

3 H 2. Scope Tenergy Corporation This specification describes the basic performance, technical requirement, testing method, warning and caution of the Li-ion Polymer rechargeable battery pack, the pack defined in this documentation is an assembly which include battery, PCM and wire, the specification only applies to Tenergy Corproation. 3. Initial Dimension Black Wire:P- Red Wire:P+ PCM Tene + - 流 60 r 水 2 gy 025 号 0.925Wh 250mAh W Unit/mm T Max 5.9 W Max 20.7 H Max 27.5 L 35±3 L1 2±0.5 Wire 3302 AWG28 PCM SP-PCM Tenergy Corporation. All rights reserved. Page 3 of 9 T

4 4. Specification NO. Item Specifications Typical. capacity 250 mah 0.2C Discharge 4.1 Min. capacity 230 mah 0.2C Discharge 4.2 Initial impedance 230m 4.3 Weight Approx:6g 4.4 Nominal voltage Fully charge voltage(fc) Fully discharge voltage(fd) 4.5 Standard charge current 0.5 C Standard charging method 4.7 Charging time 3.7 V 4.2 V Defined in this DOC: FC = 4.2 V 3.0 V Defined in this DOC: FD = 3.0 V 0.5C CC ( constant current ) charge to FC, then CV(constant voltage FC)charge till charge Standard charging Approx 4 hours Standard discharge current Constant current 0.5C,end voltage FD C~15 C 0.2C 4.9 Max. charge current 15 C~25 C 0.5C 25 C~45 C 1.0C Max. discharge current -10 C~15 C 0.2C C~60 C 1C Charge upper limit voltage 4.28±0.025V Discharge lower limit voltage 2.8±0.05V -2 C ~6 C 1 Percentage of recoverable capacity 4.13 Storage -2 C ~4 C 3 no less than 80% of the initial temperature mo capacities -2 C ~2 C 1 year nth 4.14 Recoverable capacity Constant current 0.5C charge to FC, then constant voltage FC charge to current declines to 0.01C, rest for 10min,constant current 0.5C discharge to FD, rest for 10min.Repeat above steps 3 times, recording the maximum capacity 4.15 Storage humidity 75% RH 4.16 Appearance Without distortion and leakage 2014 Tenergy Corporation. All rights reserved. Page 4 of 9

5 4.17 Standard testing condition Temperature: 23±5 C Humidity: 75%RH Atmospheric pressure: Kpa Remark: From 4.1 to 4.12, the testing condition is following 4.17 (standard testing condition) Operating temperature: charging : 0 C ~45 C; Discharging:-10 C ~60 C If the working condition is out of 4.17, the performance will be some shift. 5. General Performance No. Item Test Methods and Condition Criteria C Capacity 1C Capacity 5.3 Cycle Life At standard testing condition, after standard charging, rest battery for 10min, then discharging at 0.2C to voltage FD, recording the discharging time. At standard testing condition, after standard charging, rest battery for 10min, then discharging at 1C to voltage FD, recording the discharging Capacity At standard testing condition, constant current 0.5C charge to FC, then constant voltage charge to current declines to 0.01C, rest 10min, constant current 0.5C discharge to FD, rest 10min. Repeat above steps till continuously discharging capacity Higher than 80% of the Initial Capacities of the Cells 300min 54min 300 times 5.4 Capability of retaining capacity At standard testing condition,after standard charging, no outer loading circuit, rest the pack 28days, discharging at 0.2C to voltage FD, recording the discharging time. 240min 6. Environment Performance No. Item Test Methods and Condition Criteria 2014 Tenergy Corporation. All rights reserved. Page 5 of 9

6 6.1 Discharge at high temperature Step1:at standard testing condition, fully charge the cells with standard charging method. Step2: rest the cells 4h at 60±2, then discharging at 1C to voltag FD at the same temperature, and recording the discharging time. 54min 6.2 Discharge at low temperature Step1:at standard testing condition, fully charge the cells with standard charging method. Step2: rest the cells 16h at -10±2 C, then discharging at 0.2C to voltage FD at the same temp., recording the discharging time. 210min 6.3 Thermal shock Step1:at standard testing condition, fully charge the cells with standard charging method. Step2: put the cells in the oven, the temperature of the oven is to be raised at 5±2 C per minute to a temperature of 130±2 C and remains 10 minutes. No fire, no smoke 7. Safety Characteristic No. Item Test Methods and Condition Criteria 7.1 Overcharge testing (Without PCM) At standard testing condition, charging cell with constant current 3C to voltage 4.6V, then with constant voltage 4.6V till current decline to 0. Stop test till cells temperature 10 lower than max temperature. No fire or smoke 7.2 Over-discharge testing (Without PCM) At standard testing condition, the pack be discharge to cut-off voltage, then connect with external load of 30 ohm for 24 hours. No fire, no smoke, no leakage. Above testing of safe characteristic must be with protective equipment. 8. Battery Protection 8.1 PCM Standard Symbol Name MIN. Typica l. MAX. Uni t 2014 Tenergy Corporation. All rights reserved. Page 6 of 9

7 VDET1 Over-Charge detect voltage V VDET2 ODC Over-discharge detect voltage Over-discharge Current protect V A IDD Current consumption during operation μa RD Internal resistance in normal operation mω 9. Standard test conditions Test should be conducted with new batteries within one week after shipment from our factory and the batteries shall not be cycled more than five times before the test. Unless otherwise defined, test and measurement shall be done under temperature of 20±5 C and relative humidity of 45~85%. If it is judged that the test results are not affected by such conditions, the tests may be conducted at temperature 15~30 C and humidity 25~85%RH. 10. Cautions in use To ensure proper use of the battery please read the manual carefully before using it Handling Do not expose to, dispose of the battery in fire. Do not put the battery in a charger or equipment with wrong terminals connected. Avoid shorting the battery. Avoid excessive physical shock or vibration. Do not disassemble or deform the battery. Do not immerse in water. Do not use the battery mixed with other different make, type, or model batteries. Keep out of the reach of children Charge and discharge 2014 Tenergy Corporation. All rights reserved. Page 7 of 9

8 Battery must be charged in appropriate charger only. Never use a modified or damaged charger. Do not leave battery in charge over 24 hours Storage Store the battery in a cool, dry and well-ventilated area Disposal Tenergy Corporation Regulations vary for different countries, Dispose of in accordance with local regulations. 11. Battery operation instruction 11.1 Charging Charging current: Do not surpass the biggest charging current stipulated in this specification book. Charging voltage: Do not surpass the biggest voltage stipulated in this specification book. Charging temperature: The battery must charge in the ambient temperature scope which this specification stipulated. Use the constant electric current and constant voltage to charge. Do not reverse charge. When the positive electrode and the cathode meet together, damage can be made for the battery Discharging current The discharging current shall not surpass the biggest discharging current stipulated in this specification. The oversized electric current discharge can lower the battery storage capacity and cause battery to generate heat Electric discharge temperature The battery discharge must carry on in the ambient temperature scope which this specification book stipulated Over-discharge Short time of excessively discharge will not affect the usage. But the long time excess discharge can damage the battery performance and cause the function losing. When the battery is not used for a long time, because of its automatic flashover characteristic, it may excessively discharges. To prevent excessively discharge occur, the battery should maintain certain electric quantity Storage of battery 2014 Tenergy Corporation. All rights reserved. Page 8 of 9

9 The battery should be stored within the temperature range which stipulated in the specification book. If the storage time surpasses six months, you should carry on additional charge to the battery. 12. Other chemical reaction Because batteries utilize chemical reactions, battery performance will deteriorate over time even only store there for a long period of time but without being used. In addition, if the using conditions, such as charge, discharge, ambient temperature etc. are not maintained within the specified ranges, the battery life expectancy may be shortened or the device which the battery is applied for could be damaged because of electrolyte leakage. If the battery can not sustain for a relatively long period of time at one charge, even if it is charged correctly, this may indicate it is time to change the battery. 13. Note Any other items which are not covered in this specification shall be agreed by both parties Tenergy Corporation. All rights reserved. Page 9 of 9

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Lithium-Ion Rechargeable Battery Model: 30001-1 SPEC: 14500, 3.7V, 800mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergybattery.com

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Lithium Ion Cylindrical Battery Model: 30036 SPEC: 18500 1400mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel: 510.687.0388

More information

Li-ion Cylindrical Battery Specification. SHIBA Li-ion Battery Typical Capacity: 2000mAh Total Page: 10

Li-ion Cylindrical Battery Specification. SHIBA Li-ion Battery Typical Capacity: 2000mAh Total Page: 10 Li-ion Cylindrical Battery Specification MODEL : SHIBA Li-ion Battery Typical Capacity: 2000mAh Total Page: 10 1 P a g e Table of Content 1. Scope...3 2. Initial Dimension...3 3. Specification...4 4. General

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Li-ion Battery Model: 31001 SPEC: Li-18650 1S2P 3.7V 5200mAh-PCM-(3) File Number: Approved By Checkup Make Shaopeng Yi -- Yingchen 2013-10-26 -- 2013-10-26 Signature

More information

Li-ion Cylindrical Battery Specification. Enercig EC-32600

Li-ion Cylindrical Battery Specification. Enercig EC-32600 Li-ion Cylindrical Battery Specification Enercig EC-32600 Li-ion32600C Nominal Capacity 5500mAh Registered Checked Approved 2015.02.06 2015.02. 06 1. MODIFIED LIST 2.Scope This specification describes

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Nickel-Metal Hydride Battery Model: 10003 SPEC: 8.4V (9V size) 200mAh LSD Cell File Number:/ Project: / Approved By Checkup Make Andy / Haixia Bi 2016-7-13 / 2016-7-13

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Lithium-ion Polymer Battery Model: 30186-1 SPEC: 3.7V 5000mAh 7063135 1S pack Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A.

More information

Li-ion Cylindrical Battery Specification

Li-ion Cylindrical Battery Specification Li-ion Cylindrical Battery Specification MODEL: EC- TN26650HP Nominal Capacity: 3400 mah page 1 of 7 Content 1.MODIFIED LIST... 2 2.Scope... 3 3. Initial Dimension... 3 4.Specification... 4 5 General Performance...

More information

Li-ion Cylindrical Battery Specification

Li-ion Cylindrical Battery Specification Li-ion Cylindrical Battery Specification MODEL: EC- 265HC Nominal Capacity: 5200 mah page 1 of 10 Content 2.Scope... 3 3. Initial Dimension... 3 4.Specification... 4 5 General Performance... 5 6 Environment

More information

Li-ion Cylindrical Battery Specification

Li-ion Cylindrical Battery Specification Li-ion Cylindrical Battery Specification MODEL: Nominal Capacity: Customer: Enercig Total Page 7 EC-14500HP 650mAh Content 1.Product Image... 2 2.Scope... 2 3. Initial Dimension... 3 4.Specification...

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Lithium Ion Battery Model: 30016 SPEC: Li-ion 18650 3.7V 2600(2550)mAh-PCM-Cap File Number:8111018065038 Project: Approved By Checkup Make Huanchun LI Shaopeng Yi Ningzong

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Li-ion Battery Model: 30050 SPEC: Li-18650 3.7V 2600(2550)mAh Tab-B File Number:8111018065054 Approved By Checkup Make Huanchun Li Shaopeng Yi Ningzong Tao 2013-3-30

More information

Li-ion Cylindrical Battery Specification. Nominal Capacity: 2600 mah. page 1 of 7

Li-ion Cylindrical Battery Specification. Nominal Capacity: 2600 mah. page 1 of 7 Li-ion 18650 Cylindrical Battery Specification MODEL: EC- C5 Nominal Capacity: 2600 mah page 1 of 7 Content 1.MODIFIED LIST... 2 2.Scope... 3 3. Initial Dimension... 3 4.Specification... 4 5 General Performance...

More information

Cylindrical Li-ion Battery Specification

Cylindrical Li-ion Battery Specification Cylindrical Li-ion Battery Specification MODEL: Li-ion 18650 2600mAh 3.7V Prepared By/Date Checked By/Date Approved By/Date Feb,27,2014 Signature/Date Customer Approval Company Name Company Stamp Page

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Tenergy Lithium-ion Polymer Battery Model: 30117-1 SPECS: 3.7V 80mAh 401225 Lipo Cell with PCM and Wires Approved By Checkup Make Signature Date Customer Confirmation

More information

SHENZHEN PKCELL BATTERY CO., LTD. Li-Polymer Battery Technology Specification. Model: Li-Polymer mAh 3.7V with PCM

SHENZHEN PKCELL BATTERY CO., LTD. Li-Polymer Battery Technology Specification. Model: Li-Polymer mAh 3.7V with PCM Li-Polymer Battery Technology Specification Model: Li-Polymer 402025 150mh 3.7V with PCM Corporate name Customer confirmation Checked pproved Corporate seal Signed: Drafted by: pproved by: Document No.:

More information

Phosphate-base Lithium-ion Battery Pack Model:LFP V 1350Ah Product Specifications Lithium Energy Solution 1/8

Phosphate-base Lithium-ion Battery Pack Model:LFP V 1350Ah Product Specifications Lithium Energy Solution 1/8 Phosphate-base Lithium-ion Battery Pack Model:LFP1350-48 48V 1350Ah Product Specifications Lithium Energy Solution 1/8 1. Product overview LFP1350-48 Products are mainly for customized development of high

More information

LFP-RCR123A Product Specification. Specification Approval Sheet

LFP-RCR123A Product Specification. Specification Approval Sheet Page 1 of 8 Bao Tong USA dba Tysonic Battery 1032 East Main St., Alhambra, CA 91801 877-897-6648 (P) 626-576-2503 (F) WWW.TYSONICBATTERY.COM Specification Approval Sheet LFP-RCR123A rechargeable LiFePo4

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Cylindrical Lithium Ion Cell Model: 30001-0 SPEC: 14500-800 Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel: 510.687.0388

More information

Li-ion Polymer Battery Specification

Li-ion Polymer Battery Specification Customer: ME1421A Li-ion Polymer Battery Specification Model:HPL402323-2C-190mAh Checked & Approved by Prepared by Date Andy Liu Wang Wei 2015-3-7 History of revisions Edition Prepared by Approved by Date

More information

Li-ion Cylindrical Battery Specification

Li-ion Cylindrical Battery Specification 嘉洋电池 ( 深圳 ) 有限公司 KAYO Battery (ShenZhen) Co., Ltd. 305#, Chaohui Building, Baohua Road, Longhua Town, Shenzhen, China TEL:86-755-28117967 FAX:86-755-28117957 VER:A DATE:08.04.16 Customer: / Li-ion Cylindrical

More information

Li-ion Button Rechargeable Battery Specification

Li-ion Button Rechargeable Battery Specification 7 Customer: Li-ion Button Rechargeable Battery Specification MODEL: LIR2450 Prepared By/Date Checked By/Date Approved By/Date Customer confirmation Date History of revisions Edition Description Prepared

More information

Approval Sheet for. Lithium and Iron Disulfide Battery. Model: LFB-AAA

Approval Sheet for. Lithium and Iron Disulfide Battery. Model: LFB-AAA Approval Sheet for Lithium and Iron Disulfide Battery Model: LFB-AAA AA Portable Power Corp (http://www.batteryspace.com) Address: 2700 Rydin Road, Unit C, Richmond, CA, 94804 Tel: 510-525-2328, Fax: 510-439-2808

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Tenergy 9V 600mAh Li-ion Rechargeable Battery Model: 30593 SPECS: 9V 600mAh Approved By Jay Wang Checkup Make Yezi Dong Signature Date Customer Confirmation Company Name:

More information

P41 Power Bank datasheet. Power Bank Datasheet. Model Name: P41 (4400mAh)

P41 Power Bank datasheet. Power Bank Datasheet. Model Name: P41 (4400mAh) Power Bank Datasheet Model Name: P41 (4400mAh) 1 Contents Power Bank Datasheet... 1 Product Specification... 3 Cell Specification... 4 PCM Specification... 4 Reliability test... 5 Security Testing Standard...

More information

Data Sheet BP v 100Ah LiFePO 4 (Peli TM Case Kit)

Data Sheet BP v 100Ah LiFePO 4 (Peli TM Case Kit) Data Sheet BP2589-12v 100Ah LiFePO 4 (Peli TM Case Kit) Product Name Battery Model Spec File Revision LiFePO4 Battery in Peli TM Case LiFePO4-11198141 4S5P 12.8V 100Ah A2 Amendment Records Revision Description

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Tenergy Lithium-ion Polymer Battery Model: 30107-0 SPECS: LP6050100 3.7V 3000mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A.

More information

Lithium Battery Specification

Lithium Battery Specification Customer: Lithium Battery Specification MODEL: Prepared By/Date Checked By/Date Approved By/Date Signature/Date Customer Approval Company Name Company Stamp Page 1 o f 7 Amendment Records Edition Description

More information

Lithium Battery Specification

Lithium Battery Specification Customer: Lithium Battery Specification MODEL: Prepared By/Date Checked By/Date Approved By/Date Signature/Date Customer Approval Company Name Company Stamp Page 1 o f 7 Amendment Records Edition Description

More information

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power Issued Date > 2017-07-26 Issued Version > V00 1. General Information This specification defines the performance of rechargeable LiFePO4

More information

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power Issued Date > 2017-04-19 Issued Version > V00 1. General Information This specification defines the performance of rechargeable LiFePO4

More information

CTC Battery, Inc. Lithium Iron Phosphate Battery Specification

CTC Battery, Inc. Lithium Iron Phosphate Battery Specification CTC Battery, Inc. Lithium Iron Phosphate Battery Specification Model: 12.8 V 19.8 Ah 10/25/2012 Rev 01 Robert Tan Copyright 2012 CTC Battery, Inc. All Rights Reserved Copyright 2012 CTC Battery, Inc. All

More information

ENGLISH. Datasheet. Polymer Li-ion Rechargeable Battery Pack

ENGLISH. Datasheet. Polymer Li-ion Rechargeable Battery Pack ENGLISH Datasheet Polymer Li-ion Rechargeable Battery Pack 1. Scope This specification shall be applied to polymer Li-ion Rechargeable Battery manufactured by RS Component. 2. Basic Product Characteristics

More information

LITHIUM-ION POLYMER RECHARGEABLE BATTERY

LITHIUM-ION POLYMER RECHARGEABLE BATTERY Model : Description : Lithium-Ion Polymer rechargeable battery (RoHS compliant) Dimension : Max. 14.1 x 34.5 x 51mm Nominal Capacity : 1100mAh (Min. 1045) at 220mA rate discharge to 6V at 25 C Nominal

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Li-Ion 18650 3.6V 2200mAh battery Model: 30023-0 SPECS: 3.6V 2200mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergy.com

More information

Lithium Polymer Rechargeable Battery Pack Tested and approved to UN38.3

Lithium Polymer Rechargeable Battery Pack Tested and approved to UN38.3 ENGLISH Datasheet RS Pro Article: 1449405 Lithium Polymer Rechargeable Battery Pack Tested and approved to UN38.3 1. Scope This specification shall be applied to Lithium polymer rechargeable battery. 2.

More information

Li-ion Cylindrical Battery Specification

Li-ion Cylindrical Battery Specification Customer No.: Li-ion Cylindrical Battery Specification Model: IFR14430 Prepared Auditing Approve Customer Confirm Date History of revisions Edition Description Prepared by Approved by Date A First Edition

More information

Specification Approval Sheet

Specification Approval Sheet Name: Lithium Polymer Battery Model: 053759 SPEC: Number: 3.7V/1100mAh GMB0812310964 Approved By Checkup Make Signature Date Customer Company Name: Confirmation Stamp: Specification Modification Records

More information

Specification Approval Sheet

Specification Approval Sheet Name: Lithium Polymer Battery Model: 384650 SPEC: Number: 11.1V/800mAh YKZ0904010211Y Approved By Checkup Make Signature Date Customer Company Name: Confirmation Stamp: Add: YOKU Industrial Zone Nangjing

More information

Specification Approval Sheet

Specification Approval Sheet Name: Lithium Polymer Battery Model: 505396 SPEC: Number: 3.7V/2300mAh YKZ0809050622Y Approved By Checkup Make Signature Date Customer Company Name: Confirmation Stamp: Add: YOKU Industrial Zone Nangjing

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: LiFePO4 rechargeable battery Model: 26650 SPEC: 3.2V 3300mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergybattery.com

More information

li-ion Polymer Battery Specification

li-ion Polymer Battery Specification . Customer: li-ion Polymer Battery Specification Model: G600 Prepared By/Date Checked By/Date Approved By/Date Note:1.Kindly please sign on the above and send it back to us if the sample is approved. 2.Kindly

More information

The document describes the product specification of the LiFePO4 polymer lithium-ion rechargeable battery cell supplied by Tenergy Corporation.

The document describes the product specification of the LiFePO4 polymer lithium-ion rechargeable battery cell supplied by Tenergy Corporation. Product Name: LiFePO4 polymer lithium-ion rechargeable battery cell Product Number: 30208 Description: Battery Chemistry: 3.2V 15Ah LiFePO4 The document describes the product specification of the LiFePO4

More information

Specification Approval Sheet

Specification Approval Sheet . Specification Approval Sheet FOR LIPO BATTERY Product Name Model SPEC Company Name Document Number Li-ion Polymer Battery 6567100/4000mAh/3.7V GMB POWER GMB1102150902 Sample Number Document Revision

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Li-ion Polymer Battery Model: 30145-1 SPEC: 561540 3.7V 300mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergybattery.com

More information

LiFePO4 Battery Specification

LiFePO4 Battery Specification LiFePO4 Battery Specification Model: TB-BL12100F-M115A TOPBAND NEW ENERGY CO.,LTD Address: Topband Industrial Park,Liyuan Industrial Zone,Shiyan,Bao'an,Shenzhen, China,518108. Web:www.topband.com.cn Registered

More information

Product Specification

Product Specification Product Specification for Polymer Lithium-ion Battery Model Number: PGEB014461 1. Scope This document describes the performance characteristics and testing methods for Polymer Li-ion Batteries produced

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Lithium-ion Cell Model: 30005-0 SPEC: 3.7V 2600mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergybattery.com 1

More information

Specification Approval Sheet

Specification Approval Sheet GUANGZHOU MARKYN BATTERY CO., LTD. Specification Approval Sheet Name: Lithium Polymer Battery Model: 063048 SPEC: 3.7V/850mAh Number: GMB1007090096 Approved By Checkup Make Customer Confirmation Signature

More information

EEMB CO., LTD. Specification

EEMB CO., LTD. Specification ZJQM-RD-SPC-A0370 0.0 2014-11-5 1/7 EEMB CO., LTD Polymer Li-ion Battery Model: Capacity: 1450mAh Prepared Checked Approved Customer: Customer Approval(Customer confirmation): Signature Checked Approved

More information

EEMB CO., LTD. Specification

EEMB CO., LTD. Specification ZJQM-RD-SPC-A0859 0.0 2015/3/20 1/7 EEMB CO., LTD Polymer Li-ion Battery Model: Capacity: 750mAh Prepared Checked Approved Customer: Customer Approval(Customer confirmation): Signature Checked Approved

More information

Product Specification Polymer Li-ion 7.4v 2100 mah

Product Specification Polymer Li-ion 7.4v 2100 mah Polymer Lithium-ion attery Product Specification Polymer Li-ion 7.4v 2100 mah (For high discharge ratio battery) 2700 Rydin Road, Unit C Richmond, CA, 94804, USA Tel: 510-252-2328 Fax:510-439-2808 All

More information

LiFePO4 Battery Specification

LiFePO4 Battery Specification E&J TECHNOLOGY GROUP CO., LTD LiFePO4 Battery Specification Model Number: EJ12110Fe-M Doc No: SPE-LFE-013 Version: 01 Date: 2012-03-16 Prepared Checked Approved Sara Jess John E&J TECHNOLOGY GROUP CO.,

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Tenergy Li-Ion Power Cell Model: 30265 SPECS: 3.2V 130Ah Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergy.com 1.

More information

Li-ion Battery Specification

Li-ion Battery Specification Li-ion Battery Specification Model Number: LP 103450 3.7V 1800mAh Prepared By Verified By Approved By 8-1 Amendment Records Revision Description Issued Date Approved By A0 New release 2012-02-15 8-2 Contents

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Tenergy NiMH Rechargeable Battery Model: 10203-0 SPECS: 1.2V 5000mAh C Size (Flat Top) Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:,

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Lithium-ion Cell Model: 27148134-42Ah SPEC: 3.2V 42Ah Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel: 510.687.0388 Fax:

More information

Specification Approval Sheet

Specification Approval Sheet Page No. 1/11 Specification Approval Sheet Model:IFR14500EC-600mAh Prepared by Approved by R&D Approved by SALES Approved by QA Signature Date Customer Approval Company Name : Company Stamp : O CELL New

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Tenergy LiFePO4 Battery Model: 30245 SPECS: 3.2V 24Ah Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergy.com 1. Scope

More information

Specification Approval Sheet

Specification Approval Sheet Page No. 1/11 Specification Approval Sheet Model:IFR18650EC-1.5Ah Prepared by Approved by R&D Approved by SALES Approved by QA Bing Zeng/2012.4.26 Wu Chen/2012.4.26 SiBiao Jin/2012.4.26 YG liang/2012.4.26

More information

Polymer Lithium-ion Battery Product Specification

Polymer Lithium-ion Battery Product Specification Polymer Lithium-ion Battery Product Specification (LiCoO2 Jump Starter battery) Model:7044126S3 Page 1 of 10 1. Declaration: This product specification describes polymer lithium-ion battery. Please using

More information

Specification Approval Sheet

Specification Approval Sheet ADD: Ropla Elektronik Sp. z o. o. ul. Wyścigowa 53-011 Wrocław Specification Approval Sheet MODEL: AKY582930 (500mAh 3.7V) Prepared y/date Checked y/date Checked y/date Approved y/date Paul/10-16 Signature

More information

li-ion Polymer Battery Specification

li-ion Polymer Battery Specification Customer: li-ion Polymer Battery Specification MODEL: GMB031842 Prepared By/Date Checked By/Date Approved By/Date Note:1.Kindly please sign on the above and send it back to us if the sample is approved.

More information

Specification Approval Sheet

Specification Approval Sheet Product Name Model SPEC Company Name Document Number Li-ion Polymer Battery 103450/1700mAh/3.7V Ropla YKJSXG1012136 Sample Number Document Revision A0 Approved By Checkup Make Signature Date Customer Confirmation

More information

Product Specification

Product Specification Specification No. Polymer Lithium-ion attery Model:PL-4545125-10C AA Portable Power Corp (http://www.batteryspace.com) Address: 860 S, 19 th St, Unit A, Richmond, CA, 94804 Tel: 510-525-2328 Fax: 510-439-2808

More information

EEMB CO., LTD. Specification

EEMB CO., LTD. Specification ZJQM-RD-SPC-A0670 0.0 2015-1-27 1/7 EEMB CO., LTD Polymer Li-ion Battery Model: Capacity: 2200mAh Prepared Checked Approved Customer: Customer Approval(Customer confirmation): Signature Checked Approved

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Model: SPEC: Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel: 510.687.0388 Fax: 510.687-0328 www.tenergybattery.com TABLE

More information

Specification. Li-polymer Rechargeable Battery

Specification. Li-polymer Rechargeable Battery Specification of Li-polymer Rechargeable Battery Model No.: LP-573442-1S-3 Reported by: 陈声宇 Date: Dec,13,2010 Checked by: 侯刚琪 Date: Dec,13,2010 Approved by: 陈军 Date: Dec,14,2010 1. Scope This specification

More information

Specification Approval Sheet

Specification Approval Sheet Name: Lithium Polymer Battery Model: 653453 SPEC: Number: 3.7V/2500mAh YKZ0812260951Y Approved By Checkup Make Signature Date Customer Company Name: Confirmation Stamp: Add: YOKU Industrial Zone Nangjing

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Nickel Metal Hydride Battery Model: 10306 (50AA2000) SPEC: 1.2V 2000mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. Tel:

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Polymer Lithium-Ion Battery Model: 13212223 SPEC: Number: 3.7V/50000mAh YKZ0706200643Y 1.Scope: This Document describes the Product Specification of chargeable Polymer

More information

Specification Approval Sheet

Specification Approval Sheet Name: Lithium Polymer Battery Model: 425068 SPEC: Number: 3.7V/1300mAh YKZ0809290670Y Approved By Checkup Make Signature Date Customer Company Name: Confirmation Stamp: Add: YOKU Industrial Zone Nangjing

More information

EEMB CO., LTD. Specification

EEMB CO., LTD. Specification ZJQM-RD-SPC-A0994 0.0 2015-8-14 1/9 EEMB CO., LTD Li-ion Battery Model: Capacity: 2000mAh Prepared Checked Approved Customer: Customer Approval(Customer confirmation): Signature Checked Approved Address:Room

More information

Lithium iron Phosphate Battery Specification

Lithium iron Phosphate Battery Specification Page No. 1/7 Lithium iron Phosphate Battery Specification MODEL: IFM12-230E2 (12.8V 23Ah) Prepared By/Date Checked By/Date Approved By/Date Signature/Date Customer Company Name Approval Company Stamp www.drypower.com.au

More information

TECHNOLOGY FILE GB CELL. FILE NAME:Specification for 18650C4 Cylindrical. Lithium Ion Rechargeable Battery PREPARED BY REVIEWED BY APPROVED BY

TECHNOLOGY FILE GB CELL. FILE NAME:Specification for 18650C4 Cylindrical. Lithium Ion Rechargeable Battery PREPARED BY REVIEWED BY APPROVED BY TECHNOLOGY :Specification for 18650C4 Cylindrical Lithium Ion Rechargeable Battery File Number Prepared in Department Version Efficient Date Dispensed Number PRO3 A 2006.07.31 PREPARED BY REVIEWED BY APPROVED

More information

Polymer Lithium Ion Battery. Specifications. Model: PL D. Approval Checked Draft

Polymer Lithium Ion Battery. Specifications. Model: PL D. Approval Checked Draft Document NO. Spec. No. SP362D Ver A/1 Date 200/3/20 Polymer Lithium Ion Battery Specifications Model: PL-362D Approval Checked Draft AA Portable Power Corp. Address: 2700 Rydin Rd, Unit C, Richmond, CA

More information

Specification Approval Sheet

Specification Approval Sheet Page No. 1/11 Specification Approval Sheet Model:IFR18650EC-1.5Ah Prepared By/Date(RD) Reviewed by/date Checked By/Date (QA) Approved By/Date Bing Zeng/2012.4.26 Wu Chen/2012.4.26 SiBiao Jin/2012.4.26

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Ni-Cd rechargeable battery Model: 20305 SPEC: SC 2200mAh Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp:, U.S.A. www.tenergybattery.com

More information

Product Specification

Product Specification Polymer ithium-ion attery Product Specification Model: P-9759156-10C Page 1 of 6 1.Scope This product specification describes this polymer lithium-ion battery. Please use the test methods that recommend

More information

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power Issued Date > 2016-04-13 Issued Version > V00 1. General Information This specification defines the performance of rechargeable LiFePO4

More information

L CR MAH

L CR MAH TECHNICAL SPECIFICATION FOR LI-ION L CR18650-2 0 0 0 MAH FILE NO. : DSE - LCR - L CR18650-2000 - V 17 A EDITION : V1 7 A DATE : 20 1 7 / 03 / 08 CYLINDRICAL RECHARGEABLE BATTERY Prepared By Checked By

More information

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power Issued Date > 2016-01-18 Issued Version > V00 1. General Information This specification defines the performance of rechargeable LiFePO4

More information

Checkup. Make. Signature. Date. Company Stamp: com

Checkup. Make. Signature. Date. Company Stamp: com Specification Approval Sheet Name: NICD A size Rechargeable Battery Model: SPEC: 20200 1.2V 1400mAh Approved By Checkup Make Customer Confirmation Signature Company Name: Stamp: Date 436 Kato Terrace,

More information

Li-ion Rechargeable Button Cell. Specification

Li-ion Rechargeable Button Cell. Specification Customer: Specification Model: LIR2032 Prepared By/Date Checked By/Date Approved By/Date Note:1.Kindly please sign on the above and send it back to us if the sample is approved. 2.Kindly please contact

More information

Specifications. Model: LiNiCoMn 3.7V 2000mAh. Prepared Checked Approved. AA Portable Power Corp Address:

Specifications. Model: LiNiCoMn 3.7V 2000mAh. Prepared Checked Approved. AA Portable Power Corp Address: Specifications Model: LiNiCoMn 3.7V 2000mAh Prepared Checked Approved Address: Tel:( 510) http://www.batteryspace.com Revision History VER. Release Date Amendments 1.0 2011/3/8 First release Spec. No.

More information

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power Issued Date > 2016-04-25 Issued Version > V01 1. General Information This specification defines the performance of rechargeable LiFePO4

More information

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power

LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power LITHIUM IRON PHOSPHATE BATTERY Multi-application - LiFePO4 Power Issued Date > 2016-02-24 Issued Version > V01 1. General Information This specification defines the performance of rechargeable LiFePO4

More information

APPROVE SHEET. Customer : Lithium ion polymer rechargeable battery. Cell s model name : Assembly: Date : 2008/01/29.

APPROVE SHEET. Customer : Lithium ion polymer rechargeable battery. Cell s model name : Assembly: Date : 2008/01/29. APPROVE SHEET For Lithium ion polymer rechargeable battery Customer : Cell s model name : Assembly: Date : 2008/01/29 REVISED : 0 Customer approval Comment : Customer s signature/ Date : Approved Checked

More information

Lithium-ion Polymer Battery Specification

Lithium-ion Polymer Battery Specification Version:A/0 Issuance date: 2012-03-12 Lithium-ion Polymer Battery Specification Model: JA-0545135P Draft Examine Approve J & A ELECTRONICS (CHINA) CO., LTD. Tel: +86(752)216 3772 Fax: +86(752)216 3772

More information

SPECIFICATION OF PRODUCT

SPECIFICATION OF PRODUCT PRODUCT SPECIFICATION SPB605060H (Rechargeable Lithium Ion Battery) Page 1 / 12 SPECIFICATION OF PRODUCT Rechargeable Lithium Ion Battery Model : SPB605060H Issued Checked Approved Date ENERTECH INTERNATIONAL,

More information

SHENZHEN PKCELL BATTERY CO., LTD. Polymer Li-ion Battery Technology Specification

SHENZHEN PKCELL BATTERY CO., LTD. Polymer Li-ion Battery Technology Specification Polymer Li-ion Battery Technology Specification Model:ICR18650 6600mAh 3.7V 1S3P Corporate name Customer confirmation Checked Approved Corporate seal Signed: Drafted by: Signed by: Document No.: QA.S.0221

More information

SPECIFICATION OF PRODUCT

SPECIFICATION OF PRODUCT SPECIFICATION OF PRODUCT Lithium-ion Rechargeable Cell Model: NCR18650BE Sep. 2017 Lumimodule Optical Corp. 0 1. Scope This product specification has been prepared to specify the rechargeable lithium-ion

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION PRODUCT SPECIFICATION Lithium-ion Polymer Rechargeable Cell Model: PP031012 19mAh May 13, 2009 Signature Date Customer Approval Company Name: Company Stamp : Prepared By Checked By QA Approved By Gao Yuanchao

More information

Specifications Model:

Specifications Model: Batteryspace.com Spec. No.:SP052025-01 File No.:WI/Q PTD S047 E Ver:A/0 Date:2004/11/ Polymer Lithium Ion Battery Specifications Model: PR-052025 Approval Checked Draft 2700 Rydin Road, Unit C Richmond,

More information

Product Specification

Product Specification 1. SCOPE The product specification describes the requirement of the Cylindrical Lithium-ion Cell to be supplied to the customer by Bao Tong USA Inc. Should there be any additional information required

More information

Product Specification Polymer Li-ion Rechargeable Battery Part# PLH C ( 3.7V 40Ah, 60A rate)

Product Specification Polymer Li-ion Rechargeable Battery Part# PLH C ( 3.7V 40Ah, 60A rate) Product Specification Polymer Li-ion Rechargeable Battery Part# PLH-12211218C ( 3.7V 40Ah, 60A rate) (http://www.batteryspace.com) Address: 2700 Rydin Road, Unit C, Richmond, CA, 94804 Tel: 510-525-2328

More information

2 1.Nominal Voltage 1.2V. 2 6.End Voltage of Discharge 1.0V

2 1.Nominal Voltage 1.2V. 2 6.End Voltage of Discharge 1.0V Product Name: NiMH 1.2V 3800mah 23.0 +0.0-0.7 Product Number: SCP 3800 11.0 À0.1 Battery Size: Battery Chemistry Dimension: Sub-C NiMH 43mm x 23mm 1.BATTERY MODEL SCP3800 10C 2.NOMINAL SPECIFICATION 2

More information

Specification. Li-polymer Rechargeable Battery

Specification. Li-polymer Rechargeable Battery File no.:20120102 Edition: 1.0 Specification of Li-polymer Rechargeable Battery Model No.: LP-523450-1S-3 Reported by: 陈声宇 Date: Jan,02,2012 Checked by: Approved by: Date:Jan,02,2012 Date: Jan,02,2012

More information

Specification Approval Sheet

Specification Approval Sheet Specification Approval Sheet Name: Nickel Metal Hydride Battery Model: 10302 SPEC: AA 1.2V 1800mAh 10C Approved By Checkup Make Signature Date Customer Confirmation Company Name: Stamp: 436 Kato Terrace,

More information

EEMB CO., LTD. Specification

EEMB CO., LTD. Specification ZJQM-RD-SPC-A0994 0.0 2015-8-6 1/8 EEMB CO., LTD Li-ion Battery Model: Capacity: 2200mAh Prepared Checked Approved Customer: Customer Approval(Customer confirmation): Signature Checked Approved Address:Room

More information