Oscillating Tower Fan with Remote Control

Size: px

Start display at page:

Download "Oscillating Tower Fan with Remote Control"

Garry O’Connor’
5 years ago
Views:

1 Product Code: Oscillating Tower Fan with Remote Control INSTRUCTION MANUAL 1 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

2 Please retain for reference 2 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

3 Table of Contents Table of Contents... 2 Safety Information... 3 Parts List 4 Assembly Instructions Location of Controls Operating Instructions 7-8 Remote Control 8-9 Cleaning and Maintenance Instructions. 9 Specification Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

Safety Information 1. Read the instructions. All user guidelines must be read before starting the device. 2. Keep the instructions for future use. 3.

Make sure no liquid is spilled on the device or device openings. 6. Move device carefully, avoid shocks. 7. Do not block the breakdown of the device outputs. 8.

The power cable should be unplugged when the unit is not in use. 11. The unit contains no user serviceable parts. All repairs should be carried out by a qualified engineer.

13. No naked flame sources, such as lighted candles should be placed on or near to the unit. 14.

4 Safety Information 1. Read the instructions. All user guidelines must be read before starting the device. 2. Keep the instructions for future use. 3. Attention, use and security guidelines must be respected. 4. The device must not be used near water or be put in contact with moisture. 5. Make sure no liquid is spilled on the device or device openings. 6. Move device carefully, avoid shocks. 7. Do not block the breakdown of the device outputs. 8. Do not place the device near a heat source (e.g. radiator), or place in direct sunlight. 9. Plug the device as indicated within this instruction manual. 10. The power cable should be unplugged when the unit is not in use. 11. The unit contains no user serviceable parts. All repairs should be carried out by a qualified engineer. Improper repairs may place the user at risk of harm, and will invalidate any guarantee. 12. The unit shall not be exposed to dripping or splashing and no objects filled with liquids (e.g. vases) shall be placed on the unit. 13. No naked flame sources, such as lighted candles should be placed on or near to the unit. 14. This unit is not intended for use by persons (including children) with physical, sensory or mental capabilities or lack of experiences or knowledge. They should be given supervision and instruction in the use of the appliance by a person responsible for their safety. 15. Do not use the unit for any purpose other than that for which it has been designed. 16. This unit is designed for domestic use only. It should not be used for commercial purposes. 17. This unit should not be adjusted or repaired by anyone except qualified service personnel. 18. Avoid contact with moving parts. Never insert any objects through the grill when the fan is in operation. 4 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

5 Parts List A- Front base section B- Rear base section C- Fan assembly D- Remote control 5 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

Assembly Instructions Please ensure that all parts are present prior to assembly.

14. 1. Fix the front (A) and rear (B) base sections together by slotting the two sections together until they clip into place (see figure 1 below).

Then fit the assembled fan base over the fan assembly (C).

6 Assembly Instructions Please ensure that all parts are present prior to assembly. If any parts are missing or damaged, please contact our enquiries line: Fix the front (A) and rear (B) base sections together by slotting the two sections together until they clip into place (see figure 1 below). Figure 1 2. Remove the pre-fitted screws from the fan assembly (C) using a Phillips head screwdriver (not supplied). Then fit the assembled fan base over the fan assembly (C). Finally reattach the screws back into the fan assembly base using a Phillips head screwdriver (see figure 2 below). Affix base to fan assembly (C) using these 4x screws. Figure 2 3. Finally thread the mains power cable through the cutout on the base (see figure 3 below). Thread mains cable through the cutout located here. Figure 3 6 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

7 Location of Controls Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

1 2 3 4 5 Operating Instructions Prior to connecting the product to the mains supply, ensure that the mains voltage supply corresponds with the voltage indicated on the product rating plate. 1.

The high power indicator LED on the main unit (8) will light up to show that the unit is switched on and the high speed setting is currently selected. 2.

8 Operating Instructions Prior to connecting the product to the mains supply, ensure that the mains voltage supply corresponds with the voltage indicated on the product rating plate. 1. Connect the power, and press the on/off/speed button on the main unit (1) or on the remote control (5). The fan will automatically start in high power when you turn the unit on. The high power indicator LED on the main unit (8) will light up to show that the unit is switched on and the high speed setting is currently selected. 2. Press the on/off/speed button again to select the medium speed setting, the medium power indicator LED on the main unit (7) will light up. Press the on/off/speed button again to select the low speed setting. The low power indicator LED on the main unit (6) will light up. 4. Press the on/off/speed button again and the unit will turn off. 5. To activate the oscillation function press the oscillate on/off button on the main unit (3) or on the remote control (3). The oscillate on/off indicator LED will light up to show that the unit is in oscillation mode. To switch off the oscillation function, press the oscillate on/off button again. 6. The unit has a timer function, which can be set to automatically switch off after the following time intervals 1; 2; 3; 4; 5; 6 and 7 hours. Press the timer button on the main unit (4) or (2) on the remote control. The timer indicator LED s (11, 12 and 13) on the main control panel will light up to show which timer setting is activated. Press the timer selector button on the main unit (4) or (2) on the remote control repeatedly until you reach the desired setting. To switch off the timer function, repeatedly press the timer button on the main unit (4) or (2) on the remote control until none of the timer indicator LED s (11, 12 and 13) are lit up. 7. To activate the ionising function, press the ioniser on/off button on the main unit (2) or (4) on the remote control. The ioniser indicator LED (9) on the main control panel will light up to show that the 8 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

9 ionising mode is activated. To switch off the ionising function, press the ioniser on/off button again. The ioniser indicator LED will switch off. 8. To switch the air output type, press the breeze on/off button on the main unit (5) or (1) on the remote control. This will set the fan to emit a natural wind air output. The breeze on/off indicator LED (14) on the main control panel will light up to show that the natural wind setting is activated. To switch off the natural air output, press the breeze on/off button again. The breeze indicator LED will switch off to show that the natural air function is deactivated. 9. Change the tilt function by pushing the handle on the top of the unit gently. The unit has 3x possible positions for air output (see figure 3 below). Figure 3 Remote Control 1. Always purchase the correct size of batteries for this product (2x AAA batteries- not included). 2. Always replace the batteries at the same time. Do not mix old and new batteries. 3. Do not mix alkaline standard (carbon-zinc) and rechargeable (nickel-cadmium) batteries. 4. Clean the battery contacts and also those of the device prior to battery installation. 5. Remove batteries from the device if it is not to be used for an extended period of time. 1. Remove the remote control from the storage recess on the back of the main unit (see figure 4 below). Figure 4 9 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

2. Slide off the battery compartment cover on the back of the remote and install the batteries correctly as marked by the polarity markings (+/-) inside the battery compartment. 3.

10 2. Slide off the battery compartment cover on the back of the remote and install the batteries correctly as marked by the polarity markings (+/-) inside the battery compartment. 3. Refit the battery compartment cover. Cleaning and Maintenance Instructions To clean: 1. Disconnect the power cord from the mains. 2. First use a soft cloth with light soap to clean off oil stains. 3. Then wipe and clean with a dry cloth. 5. Never use polish or any corrosive liquid that will damage the paint, metal or plastic. WARNING: Unplug the product from the electrical supply before cleaning. Specification Model Number : X03AI Power Supply : AC 230V ~ 50Hz Power Consumption : 40W 10 Scotts Ltd. Cotswold House, 1 Crompton Road, Groundwell, Wiltshire. SN25 5AW

RECHARGEABLE PORTABLE EVAPORATIVE COOLER

RECHARGEABLE PORTABLE EVAPORATIVE COOLER Instruction Manual Part No. COMP369 companionleisure.com.au companionleisure.com.au HOURS TIMER COOLER OSCILLATE SPEED HOURS C C CHARGE POWER PARTS LIST 1. Remote