Unit 34 Single-Phase Motors
|
|
|
- Ferdinand Robert Fowler
- 5 years ago
- Views:
Transcription
1 Unit 34 Single-Phase Motors
2 Objectives: Unit 34 Single-Phase Motors List the different types of split-phase motors. Discuss the operation of split-phase motors. Reverse the direction of rotation of a splitphase motor. Discuss the operation of a shaded-pole motor.
3 Objectives: Unit 34 Single-Phase Motors Discuss the operation of a repulsion-type motor Discuss the operation of a single-phase synchronous motor. Discuss the operation of a stepping motor. Discuss the operation of universal motors.
4 Split-Phase Motors Split-phase motor classifications: the resistance-start induction-run motor the capacitor-start induction-run motor the capacitor-start capacitor-run motor Split-phase motors use two separate windings to create the necessary rotating magnetic field. These windings are named the start winding and the run winding.
5 Resistance-Start Induction-Run Motor The start winding is more resistive than the run winding which creates a phase shift between the start and run windings. The start winding is removed when the motor reaches 75% of its rated speed. The direction of rotation can be changed by reversing the connection of either the start winding or the run winding.
6 Resistance-Start Induction-Run Motor The start winding has much smaller wire that the run winding.
7 Resistance-Start Induction-Run Motor The start winding is more resistive than the run winding, creating a rotating magnetic field.
8 Resistance-Start Induction-Run Motor Running and starting currents are 35 to 40 out of phase with each other.
9 Capacitor-Start Induction-Run Motor A capacitor in series with the start winding creates a 90 phase shift between the start and run windings. The start winding and capacitor are removed when the motor reaches 75% of its rated speed. The capacitor-start induction-run motor has more starting torque that the resistance-start induction-run motor, but the running characteristics are the same. The direction of rotation may be changed by reversing the connection of either the start or the run winding.
10 Capacitor-Start Induction-Run Motor The start winding has much smaller wire that the run winding.
11 Capacitor-Start Induction-Run Motor An electrolytic capacitor is connected in series with the start winding.
12 Capacitor-Start Induction-Run Motor With the capacitor, the run and start-winding currents are 90 out of phase with each other.
13 Disconnecting the Start Winding When the motor reaches approximately 75% of its rated speed the start winding will be disconnected from the circuit. The following methods may be used to remove the start winding: Centrifugal switch Hot wire relay Current relay Solid-state starting relay
14 A centrifugal switch may be used to disconnect the start winding from the circuit.
15 A hot wire relay may be used to disconnect the start winding from the circuit.
16 A current relay may be used to disconnect the start winding from the circuit.
17 A solid-state starting relay may be used to disconnect the start winding from the circuit.
18 Dual-Voltage Split-Phase Motors Dual-voltage windings for a split-phase motor.
19 Dual-Voltage Split-Phase Motors High-voltage connection for a split-phase motor with two run and two start windings.
20 Dual-Voltage Split-Phase Motors Low-voltage connection for a split-phase motor with two run and two start windings.
21 Dual-Voltage Split-Phase Motors Dual-voltage motor with one start winding labeled T 5 and T 8.
22 Dual-Voltage Split-Phase Motors High-voltage connection with one start winding.
23 Dual-Voltage Split-Phase Motors Low voltage connection with one start winding.
24 Capacitor-Start Capacitor-Run Motor The start winding and run capacitor remain in the circuit after the motor has started. A second capacitor may be used to improve starting torque that will be removed from the circuit when the motor is near its rated speed. The run capacitor is typically an oil filled capacitor. Since the capacitor remains in the circuit the power factor is close to unity.
25 Capacitor-Start Induction-Run Motor The start winding and run winding have the same size wire.
26 Capacitor-Start Capacitor-Run Motor A capacitor-start capacitor-run motor.
27 Capacitor-Start Capacitor-Run Motor A capacitor-start capacitor-run motor with an additional starting capacitor.
28 Shaded-Pole Induction Motor Shaded pole motors are fractional horsepower motors used for low torque applications and generally have a long life. A shaded-pole motor works on the principal of a rotating magnetic field. The rotating magnetic filed is created by a shading coil wound on one side of each pole piece. The direction of rotation is toward the shading coil.
29 Shaded-Pole Induction Motor A shaded pole motor has a shading coil which creates the rotating magnetic field.
30 Shaded-Pole Induction Motor The shading coil opposes a change of flux as current increases.
31 Shaded-Pole Induction Motor There is no opposition to magnetic flux when the current is not changing.
32 Shaded-Pole Induction Motor The shading coil opposes a change of flux when the current decreases.
33 Shaded-Pole Induction Motor Four-pole shaded-pole motor..
34 Repulsion-Type Motor There are three basic repulsion-type motors: Repulsion Motor Repulsion-Start Induction-Run Motor Repulsion-Induction Motor Operates on the principal that like magnetic poles repel each other. Highest starting torque of any single-phase motor.
35 Repulsion Motor Brushes placed at a 90 angle to the poles does not create any starting torque.
36 Repulsion Motor Brushes placed at a 0 angle to the poles does not create any starting torque.
37 Repulsion Motor Shifting the brushes to a 15 angle creates maximum starting torque.
38 Repulsion Motor Shifting the brushes to the other side of the pole piece will change the direction of rotation.
39 Repulsion-Start Induction-Run Motor A short circuiting ring short circuits the armature windings at approximately 75% of the rated speed causing the motor to run as an induction motor. There are two type of repulsion-start induction-run motors: Brush lifting Brush riding
40 Repulsion-Start Induction-Run Motor Short-circuiting ring for brush-riding-type repulsionstart induction-run motor.
41 Repulsion-Start Induction-Run Motor A radial commutator is used with the brush-liftingtype motor.
42 Repulsion-Start Induction-Run Motor Brush-lifting-type repulsion-start induction-run motor.
43 Repulsion Induction Motor Repulsion-induction motors contain both armature and squirrel-cage winding.
44 Single-Phase Synchronous Motors Will operate at the synchronous speed. Use a shaded pole stator to create a rotating magnetic field. Small and develop only fractional horsepower. Use the path of least reluctance to maintain the synchronous speed. Two types of single phase synchronous motors are: Warren (General Electric motor) Holtz (Hysteresis)
45 Single-Phase Synchronous Motor A Warren motor with a two pole stator will run at 3600 RPM.
46 Single-Phase Synchronous Motor A Holtz motor with a two pole stator will run at 1200 RPM.
47 Stepping Motor Rotor is a permanent magnet Convert DC electric impulses into mechanical movement Output shaft moves through a specific angular rotation each time the motor receives a pulse. The rotor can be held in its position by applying DC power. Will operate as a two phase synchronous motor when connected to two phase AC power
48 Stepper Motor The magnet aligns with the average magnetic pole.
49 Universal Motor Referred to as an AC series motor. May be operated on AC or DC. Creates high horsepower for it size and weight because of its high operating speed. Constructed similarly to a DC series motor by having a wound armature and brushes.
50 Universal Motor A compensating winding is used to counteract the inductive reactance of the armature winding. Direction of rotation can be reversed by changing the armature leads with respect to the field leads. Used in many power tools and household appliances.
51 Universal Motor Armature and brushes of a universal motor.
52 Universal Motor Conductively compensated universal motor.
53 Universal Motor Inductively compensated universal motor.
54 Review: 1. There are three types of split phase motors: Resistance-start induction-run Capacitor-start induction-run Capacitor-start capacitor-run 2. Split phase motors use a start and run winding which are out of phase with each other to create a rotating magnetic field.
55 Review: Unit 34 Single-Phase Motors 3. The direction of rotation of a split phase motor is changed by reversing the connection of either the start or the run winding. 4. The rotating magnetic field in a shadedpole motor is created by placing shading coils on one side of the pole pieces.
56 Review: Unit 34 Single-Phase Motors 5. There are three types of repulsion motors: Repulsion Repulsion-start induction-run Repulsion-induction 6. There are two types of single-phase synchronous motors Warren Holtz
57 Review: Unit 34 Single-Phase Motors 7. Stepping motors generally operate on DC and are used to produce angular movement in steps. 8. Universal motors contain a wound armature and brushes. 9. The direction of rotation of a universal motor can be reversed by changing the armature leads with respect to the field.
Most home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use.
Chapter 5 Most home and business appliances operate on single-phase AC power. For this reason, singlephase AC motors are in widespread use. A single-phase induction motor is larger in size, for the same
Pretest Module 21 Unit 4 Single-Phase Motors
Pretest Module 21 Unit 4 Single-Phase Motors 1. What are the four main components of a single-phase motor? Rotor, stator, centrifugal switch, end bells and bearings 2. How is a rotating field created in
APGENCO/APTRANSCO Assistant Engineer Electrical Previous Question Papers Q.1 The two windings of a transformer is conductively linked. inductively linked. not linked at all. electrically linked. Q.2 A
Motor Basics AGSM 325 Motors vs Engines
Motor Basics AGSM 325 Motors vs Engines Motors convert electrical energy to mechanical energy. Engines convert chemical energy to mechanical energy. 1 Motors Advantages Low Initial Cost - $/Hp Simple &
Special-Purpose Electric Machines
Special-Purpose Electric Machines The machines introduced in this lecture are used in many applications requiring fractional horsepower, or the ability to accurately control position, velocity or torque.
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES UNIT OBJECTIVES 3/21/2012
SECTION 4 ELECTRIC MOTORS UNIT 17: TYPES OF ELECTRIC MOTORS UNIT OBJECTIVES After studying this unit, the reader should be able to Describe the different types of open single-phase motors used to drive
AC MOTOR TYPES. DESCRIBE how torque is produced in a single-phase AC motor. EXPLAIN why an AC synchronous motor does not have starting torque.
Various types of AC motors are used for specific applications. By matching the type of motor to the appropriate application, increased equipment performance can be obtained. EO 1.5 EO 1.6 EO 1.7 EO 1.8
Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II. Handout: AC Commutator Motors
Institute of Technology, Nirma University B. Tech. Sem. V: Electrical Engineering 2EE305: ELECTRICAL MACHINES II Handout: AC Commutator Motors Prepared by: Prof. T. H. Panchal Learning Objective: Introduction
9/7/2010. Chapter , The McGraw-Hill Companies, Inc. MOTOR CLASSIFICATION. 2010, The McGraw-Hill Companies, Inc.
Chapter 2 MOTOR CLASSIFICATION 1 In general, motors are classified according to the type of power used (AC or DC) and the motor's principle of operation. AC DC Motor Family Tree 2 DC MOTOR CONNECTIONS
ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors. Lecture 5-1 Electric Motors
ECET 211 Electric Machines & Controls Lecture 5-1 Electric Motors (2 of 4) Text Book: Chapter 5 Electric Motors, Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015.
DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1
It is the mark of an educated mind to be able to entertain a thought without accepting it. DEPARTMENT OF EI ELECTRICAL MACHINE ASSIGNMENT 1 1. Explain the Basic concepts of rotating machine. 2. With help
Part- A Objective Questions (10X1=10 Marks)
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution) CCET 3(2016Regulation) Name of Programme: B.E. (EEE) Course Code&Course Title: 16EET41 & Synchronous & Induction
Single Phase Induction Motors
Single Phase Induction Motors Prof. T. H. Panchal Asst. Professor Department of Electrical Engineering Institute of Technology Nirma University, Ahmedabad Introduction As the name suggests, these motors
Contents. Review of Electric Circuitd. Preface ;
Preface ; Chapter 1 Review of Electric Circuitd 1.1 Introduction, 1 1.2 Direct Circuit Current, 1 1.2.1 Voltage, 3 1.2.2 Power, 3 1.2.3 Ohm's Law, 5 1.2.4 KirchhofTs Laws, 5 1.2.4.1 Kirchhoff s Current
The Wound-Rotor Induction Motor Part I
Experiment 1 The Wound-Rotor Induction Motor Part I OBJECTIVE To examine the construction of the three-phase wound-rotor induction motor. To understand exciting current, synchronous speed and slip in a
PHY 152 (ELECTRICITY AND MAGNETISM)
PHY 152 (ELECTRICITY AND MAGNETISM) ELECTRIC MOTORS (AC & DC) ELECTRIC GENERATORS (AC & DC) AIMS Students should be able to Describe the principle of magnetic induction as it applies to DC and AC generators.
Single Phase Induction Motor. Dr. Sanjay Jain Department Of EE/EX
Single Phase Induction Motor Dr. Sanjay Jain Department Of EE/EX Application :- The single-phase induction machine is the most frequently used motor for refrigerators, washing machines, clocks, drills,
2014 ELECTRICAL TECHNOLOGY
SET - 1 II B. Tech I Semester Regular Examinations, March 2014 ELECTRICAL TECHNOLOGY (Com. to ECE, EIE, BME) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~~
MEBS Utilities services Department of Electrical & Electronic Engineering University of Hong Kong
Brief comparison of induction motors with other types of motors Electric motors exhibit wide variations of speed-torque characteristics. [Adopted from EL-SHARKAWI, Mohamed A., Fundamentals of Electric
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING
DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK 16EET41 SYNCHRONOUS AND INDUCTION MACHINES UNIT I SYNCHRONOUS GENERATOR 1. Why the stator core is laminated? 2. Define voltage regulation
Note 8. Electric Actuators
Note 8 Electric Actuators Department of Mechanical Engineering, University Of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada 1 1. Introduction In a typical closed-loop, or feedback, control
Single-Phase AC Induction Squirrel Cage Motors. Permanent Magnet Series Wound Shunt Wound Compound Wound Squirrel Cage. Induction.
FAN ENGINEERING Information and Recommendations for the Engineer Twin City Fan FE-1100 Single-Phase AC Induction Squirrel Cage Motors Introduction It is with the electric motor where a method of converting
10. Starting Method for Induction Motors
10. Starting Method for Induction Motors A 3-phase induction motor is theoretically self starting. The stator of an induction motor consists of 3-phase windings, which when connected to a 3-phase supply
Types of Electric Motors
Types of Electric Motors Electric Motors DC Motors AC Motors Other Motors Shunt motor Separately Excited motor Induction motor Stepper motor Brushless DC motor Series Motor Permanent Magnet DC (PMDC) Synchronous
Renewable Energy Systems 13
Renewable Energy Systems 13 Buchla, Kissell, Floyd Chapter Outline Generators 13 Buchla, Kissell, Floyd 13-1 MAGNETISM AND ELECTROMAGNETISM 13-2 DC GENERATORS 13-3 AC SYNCHRONOUS GENERATORS 13-4 AC INDUCTION
A Practical Primer On Motor Drives (Part 11): AC And DC Motor Types
A Practical Primer On Motor Drives (Part 11): AC And DC Motor Types by Ken Johnson, Teledyne LeCroy, Chestnut Ridge, N.Y. ISSUE: December 2016 In the previous part in this series, the basic principles
Starting of Induction Motors
1- Star Delta Starter The method achieved low starting current by first connecting the stator winding in star configuration, and then after the motor reaches a certain speed, throw switch changes the winding
SYNCHRONOUS GENERATOR (ALTERNATOR)
i SYLLABUS osmania university UNIT - I SYNCHRONOUS MACHINES Constructional Details, Types of Windings, Winding Factors, EMF Equation, Fractional Pitch and Fractional Slot Windings, Suppression of Harmonics
Unit-IV. 1. Explain the operation, characteristics and application of DC and AC servo motor.
Unit-IV Special Machines - Servo motor DC and AC servomotors; stepper motors variable reluctance and permanent magnet stepper motors; single phase synchronous motor reluctance motor and hysteresis motor
ECEg439:-Electrical Machine II
ECEg439:-Electrical Machine II 2.2 Main Structural Elements of DC Machine Construction of DC Machines A DC machine consists of two main parts 1. Stationary Part (Stator):-It is designed mainly for producing
COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK SUBJECT CODE & NAME : EE 1001 SPECIAL ELECTRICAL MACHINES YEAR / SEM : IV / VII UNIT I SYNCHRONOUS RELUCTANCE
B.E-EEE(Marine) Batch 7. Subject Code EE1704 Subject Name Special Electrical Machines
Course B.E-EEE(Marine) Batch 7 Semester VII Subject Code EE1704 Subject Name Special Electrical Machines Part-A Unit-1 1 List the applications of synchronous reluctance motors. 2 Draw the voltage and torque
ELECTRIC MACHINES OPENLAB 0.2 kw
THIS SYSTEM IS A COMPLETE SET OF COMPONENTS AND MODULES SUITABLE FOR ASSEMBLING THE ROTATING ELECTRIC MACHINES, BOTH FOR DIRECT CURRENT AND FOR ALTERNATING CURRENT. STUDENTS CAN PERFORM A CRITICAL AND
Table of Contents Lesson One Lesson Two Lesson Three Lesson Four Lesson Five Lesson Six Lesson Seven Lesson Eight Lesson Nine Lesson Ten
Table of Contents Lesson One Lesson Two Lesson Three Introduction to Single-Phase Motors...3 Split-Phase Motors...21 Capacitor Motors...37 Lesson Four Lesson Five Lesson Six Repulsion Motors...55 Universal
GENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER
XXXX H02 GENERATION, CONVERSION, OR DISTRIBUTION OF ELECTRIC POWER XXXX CONTROL OR REGULATION OF ELECTRIC MOTORS, GENERATORS, OR DYNAMO-ELECTRIC CONVERTERS; CONTROLLING TRANSFORMERS, REACTORS OR CHOKE
Electrical Machines -II
Objective Type Questions: 1. Basically induction machine was invented by (a) Thomas Alva Edison (b) Fleming (c) Nikola Tesla (d) Michel Faraday Electrical Machines -II 2. What will be the amplitude and
ROTATING MAGNETIC FIELD
Chapter 5 ROTATING MAGNETIC FIELD 1 A rotating magnetic field is the key to the operation of AC motors. The magnetic field of the stator is made to rotate electrically around and around in a circle. Stator
ECE 325 Electric Energy System Components 6 Three Phase Induction Motors. Instructor: Kai Sun Fall 2016
ECE 325 Electric Energy System Components 6 Three Phase Induction Motors Instructor: Kai Sun Fall 2016 1 Content (Materials are from Chapters 13-15) Components and basic principles Selection and application
ESO 210 Introduction to Electrical Engineering
ESO 210 Introduction to Electrical Engineering Lectures-37 Polyphase (3-phase) Induction Motor 2 Determination of Induction Machine Parameters Three tests are needed to determine the parameters in an induction
EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION
EE6351 ELECTRIC DRIVES AND CONTROL UNIT-1 INTRODUTION 1. What is meant by drive and electric drive? Machines employed for motion control are called drives and may employ any one of the prime movers for
SQA Advanced Unit specification: general information
SQA Advanced Unit specification: general information Unit title: Electrical Machine Principles Unit code: HT83 47 Superclass: XJ Publication date: August 2017 Source: Scottish Qualifications Authority
QUESTION BANK SPECIAL ELECTRICAL MACHINES
SEVENTH SEMESTER EEE QUESTION BANK SPECIAL ELECTRICAL MACHINES TWO MARK QUESTIONS 1. What is a synchronous reluctance 2. What are the types of rotor in synchronous reluctance 3. Mention some applications
Chapter 2: AC Gearmotors and Motors
Chapter : AC Gearmotors and Motors Although commutator and brush assemblies may be used in some types of alternating current (AC) gearmotors and motors (series/universal wound), brushless induction-type
Comprehensive Technical Training
Comprehensive Technical Training For Sugar Mills Staff on Operation & Maintenance of Baggase Based HP Cogeneration System Schedule: 10 th July to 13 th July, 2017 A.C. GENERATOR Topics Covered. Introduction.
OUTLINE (MOTORS) STEPPING MOTORS
OUTLINE (MOTORS) OUTLINE (MOTORS) OPL ELETRIS handles motors marked by the motors Induction motors Induction motors make use of the rotation of a basket placed in a rotating magnetic field. Three phase
I.E.S. Cristo Del Socorro de Luanco. Magnetism
Magnetism Magnetism is a force of attraction or repulsion that acts at a distance. It is due to a magnetic field, which is caused by moving electrically charged particles or is inherent in magnetic objects
Sensors & Actuators. Actuators Sensors & Actuators - H.Sarmento
Sensors & Actuators Actuators 014-015 Sensors & Actuators - H.Sarmento Outline Mechanical actuators Electromechanical actuators Electric motors Piezo actuators 014-015 Sensors & Actuators - H.Sarmento
Question Bank ( ODD)
Programme : B.E Question Bank (2016-2017ODD) Subject Semester / Branch : EE 6703 SPECIAL ELECTRICAL MACHINES : VII-EEE UNIT - 1 PART A 1. List the applications of synchronous reluctance motors. 2. Draw
Electrical Machines II. Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit
Electrical Machines II Week 5-6: Induction Motor Construction, theory of operation, rotating magnetic field and equivalent circuit Asynchronous (Induction) Motor: industrial construction Two types of induction
Induction motors advantages of induction motors squirrel cage motor
AC Motors With AC currents, we can reverse field directions without having to use brushes. This is good news, because we can avoid the arcing, the ozone production and the ohmic loss of energy that brushes
Gener. Instructor: Center
PDHonline Course E404 (4 PDH) Alternating Current Gener rators and Motors Instructor: Lee Layton, P.E 2013 PDH Online PDH Center 5272 Meadow Estatess Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088
Lecture 20: Stator Control - Stator Voltage and Frequency Control
Lecture 20: Stator Control - Stator Voltage and Frequency Control Speed Control from Stator Side 1. V / f control or frequency control - Whenever three phase supply is given to three phase induction motor
(d) None of the above.
Dr. Mahalingam College of Engineering and Technology, Pollachi-3 (An Autonomous Institution affiliated to Anna niversity) CCET II (2016 Regulation) Name of Programme: B.E. (EEE) Course Code & Course Title:
INDUCTION MOTOR. There is no physical electrical connection to the secondary winding, its current is induced
INDUCTION MOTOR INTRODUCTION An induction motor is an alternating current motor in which the primary winding on one member (usually the stator) is connected to the power source and a secondary winding
Synchronous Motor Drives
UNIT V SYNCHRONOUS MOTOR DRIVES 5.1 Introduction Synchronous motor is an AC motor which rotates at synchronous speed at all loads. Construction of the stator of synchronous motor is similar to the stator
Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors
Pretest Module 21 Units 1-4 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase motor? Stator and Rotor 2. Which part of a three-phase squirrel-cage induction motor is a
PAC TRAINING PUMP MOTORS
PAC TRAINING PUMP MOTORS 1 Basics Magnet supported from above N S N S Since unlike poles repel each other, the magnet will rotate Stationary Magnet 2 Basics N S Stationary Magnet 3 Basics N N S S Stationary
Chapter 8 Magnetism and Its Uses. Section 1: Magnetism Section 2: Electricity and Magnetism Section 3: Producing Electric Current
Chapter 8 Magnetism and Its Uses Section 1: Magnetism Section 2: Electricity and Magnetism Section 3: Producing Electric Current Section 1: Magnetism Standard 6: Demonstrate an understanding of the nature,
CHAPTER 17 SINGLE-PHASE MOTORS
CHAPTER 17 SINGLE-PHASE MOTORS INTRODUCTION Single-phase AC motors are the most common motors built. Every home, workshop, and vessel has them. Since there is such a wide variety of these motors, it is
Application Note : Comparative Motor Technologies
Application Note : Comparative Motor Technologies Air Motor and Cylinders Air Actuators use compressed air to move a piston for linear motion or turn a turbine for rotary motion. Responsiveness, speed
Synchronous Generators I. Spring 2013
Synchronous Generators I Spring 2013 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is then turned
Starting Systems & Traction Motor Systems. ATASA 5 th. ATASA 5 TH Study Guide Chapter 18 Pages Starting & Traction Motor Systems 62 Points
ATASA 5 TH Study Guide Chapter 18 Pages 537 570 Starting & Traction Motor Systems 62 Points Please Read The Summary 1. Electric are used to start the engine & in hybrids are used to move the vehicle. Motors
Mechatronics Chapter 10 Actuators 10-3
MEMS1049 Mechatronics Chapter 10 Actuators 10-3 Electric Motor DC Motor DC Motor DC Motor DC Motor DC Motor Motor terminology Motor field current interaction Motor commutator It consists of a ring of
14 Single- Phase A.C. Motors I
Lectures 14-15, Page 1 14 Single- Phase A.C. Motors I There exists a very large market for single-phase, fractional horsepower motors (up to about 1 kw) particularly for domestic use. Like many large volume
Basic Motor Theory. Introduction
Basic Motor Theory Introduction It has been said that if the Ancient Romans, with their advanced civilization and knowledge of the sciences, had been able to develop a steam motor, the course of history
Universal motor From Wikipedia, the free encyclopedia
Page 1 of 8 Universal motor From Wikipedia, the free encyclopedia The universal motor is so named because it is a type of electric motor that can operate on AC or DC power. It is a commutated serieswound
AC Motors vs DC Motors. DC Motors. DC Motor Classification ... Prof. Dr. M. Zahurul Haq
AC Motors vs DC Motors DC Motors Prof. Dr. M. Zahurul Haq http://teacher.buet.ac.bd/zahurul/ Department of Mechanical Engineering Bangladesh University of Engineering & Technology ME 6401: Advanced Mechatronics
Electrical Machines and Energy Systems: Overview SYED A RIZVI
Electrical Machines and Energy Systems: Overview SYED A RIZVI Electrical Machines and Energy Systems Deal with the generation, transmission & distribution, and utilization of electric power. This course
Chapter 4 DC Machines
Principles of Electric Machines and Power Electronics Chapter 4 DC Machines Third Edition P. C. Sen Chapter 4 DC machine Electric machine Type: rotating machine Applications: generator (electric source)
Synchronous Generators I. EE 340 Spring 2011
Synchronous Generators I EE 340 Spring 2011 Construction of synchronous machines In a synchronous generator, a DC current is applied to the rotor winding producing a rotor magnetic field. The rotor is
Doubly fed electric machine
Doubly fed electric machine Doubly fed electric machines are electric motors or electric generators that have windings on both stationary and rotating parts, where both windings transfer significant power
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING ASSIGNMENT Name : Electrical and Electronics Engineering Code : A40203 Class : II B. Tech I Semester Branch :
Scheme - I. Sample Question Paper
Program Name Program Code Course Title Sample Question Paper : Diploma in Industrial Electronics : IE : Electrical Machines and Transformers Max. Marks : 70 Time : 3 Hrs. Q1. ATTEMPT ANY FIVE OF THE FOLLOWING.
Horns, Wiper, and Washer System Operation
14 Horns, Wiper, and Washer System Operation LEARNING OBJECTIVES Upon completion and review of this chapter, you should be able to: Explain the operation of an automotive horn. Identify the different types
Electrical Machines and Energy Systems: Operating Principles (Part 3) SYED A RIZVI
Electrical Machines and Energy Systems: Operating Principles (Part 3) SYED A RIZVI Missing piece: The induced voltage in the stator windings, E S. The rotor s rotating magnetic field induces a voltage
LINEAR MOTORS. Technology of linear motors
LINEAR MOTORS Since linear motors do not have any gear unit it is more simple converting motion in electrical drives. Combined with magnet floating technology an absolutely contact-less and so a wear resistant
OUTLINE (MOTORS) STEPPING MOTORS. COPAL ELECTRONICS handles motors marked by the. Induction motors. A C motors. Inductor synchronous motors.
OUTLINE (MOTORS) OPL ELETRIS handles motors marked by the motors Induction motors Induction motors make use of the rotation of a basket placed in a rotating magnetic field. Three phase is used to produce
AC motor An AC motor is an electric motor driven by an alternating current. It commonly consists of two basic parts, an outside stationary stator having coils supplied with alternating current to produce
Copyright Notice. Small Motor, Gearmotor and Control Handbook Copyright Bodine Electric Company. All rights reserved.
Copyright Notice Small Motor, Gearmotor and Control Handbook Copyright 1993-2003 Bodine Electric Company. All rights reserved. Unauthorized duplication, distribution, or modification of this publication,
R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]
![R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]](/thumbs/89/100786446.jpg "R13 SET - 1. b) Describe different braking methods employed for electrical motors. [8M]")
Code No:RT32026 R13 SET - 1 III B. Tech II Semester Regular Examinations, April - 2016 POWER SEMICONDUCTOR DRIVES (Electrical and Electronics Engineering) Time: 3 hours Maximum Marks: 70 Note: 1. Question
Copyright Notice. Small Motor, Gearmotor and Control Handbook Copyright Bodine Electric Company. All rights reserved.
Copyright Notice Small Motor, Gearmotor and Control Handbook Copyright 1993-2003 Bodine Electric Company. All rights reserved. Unauthorized duplication, distribution, or modification of this publication,
Motor Winding Kit. LabVolt Series. Datasheet
Motor Winding Kit LabVolt Series Datasheet Festo Didactic en 220 V - 60 Hz 07/2018 Table of Contents General Description 2 Optional Equipment Required to Operate the Rotating Machines 3 Features & Benefits
CHAPTER 4 HARDWARE DEVELOPMENT OF DUAL ROTOR RADIAL FLUX PERMANENT MAGNET GENERATOR FOR STAND-ALONE WIND ENERGY SYSTEMS
66 CHAPTER 4 HARDWARE DEVELOPMENT OF DUAL ROTOR RADIAL FLUX PERMANENT MAGNET GENERATOR FOR STAND-ALONE WIND ENERGY SYSTEMS 4.1 INTRODUCTION In this chapter, the prototype hardware development of proposed
SYNCHRONOUS MOTOR DESIGN AND ANALYSING THE OUTPUT CHARACTERISTICS MIOR AHMAD FAIZ BIN RIZA
SYNCHRONOUS MOTOR DESIGN AND ANALYSING THE OUTPUT CHARACTERISTICS MIOR AHMAD FAIZ BIN RIZA This thesis is submitted as partial fulfillment of the requirements for the award of the Bachelor of Electrical
Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1
Date: Name: ID: LABORATORY EXPERIMENT NO. 8 INDUCTION MOTOR/GENERATOR 8-1 OBJECT 1. To determine the general performance of a squirrel motors 2. To observe the characteristics of induction generators.
INTRODUCTION TO SENSORS, TRANSDUCERS & ACTUATORS
INTRODUCTION Transducers play a major role in mechatronics engineering & technology. These are the basic elements that convert or transform one form of energy to another form. Let us change the word energy
CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR
100 CHAPTER 6 DESIGN AND DEVELOPMENT OF DOUBLE WINDING INDUCTION GENERATOR 6.1 INTRODUCTION Conventional energy resources are not sufficient to meet the increasing electrical power demand. The usages of
Leeson Single Phase Electric Motor characteristics and applications
1 of 5 19/10/2006 5:49 PM Single-phase Electric Motors Characteristics & Applications by Kevin Heinecke, LEESON Electric Corporation Back to Web Merlin General Information Mechanical Electrical Metric
SPH3U UNIVERSITY PHYSICS
SPH3U UNIVERSITY PHYSICS ELECTRICITY & MAGNETISM L (P.599-604) The large-scale production of electrical energy that we have today is possible because of electromagnetic induction. The electric generator,
SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL ELECTRICAL MACHINES
1 SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL 28-B/7, Jia Sarai, Near IIT, Hauz Khas, New Delhi-110016. Ph. 011-26514888. www.engineersinstitute.com 2 CONTENT 1. : DC MACHINE,
UNIT 2. INTRODUCTION TO DC GENERATOR (Part 1) OBJECTIVES. General Objective
DC GENERATOR (Part 1) E2063/ Unit 2/ 1 UNIT 2 INTRODUCTION TO DC GENERATOR (Part 1) OBJECTIVES General Objective : To apply the basic principle of DC generator, construction principle and types of DC generator.
UNIT-I ALTERNATORS PART-A
UNIT-I ALTERNATORS 1. What principle is used in Alternators? 2. What are the requirements of an alternator? 3. Mention the types of alternator rotor. 4. What is hunting in alternators? 5. What are the
Prepared By: Ahmad Firdaus Bin Ahmad Zaidi
Prepared By: Ahmad Firdaus Bin Ahmad Zaidi A stepper motor is an electromechanical device which converts electrical pulses into discrete mechanical rotational movements. Stepper motor mainly used when
INTRODUCTION Principle
DC Generators INTRODUCTION A generator is a machine that converts mechanical energy into electrical energy by using the principle of magnetic induction. Principle Whenever a conductor is moved within a
Unit 32 Three-Phase Alternators
Unit 32 Three-Phase Alternators Objectives: Discuss the operation of a three-phase alternator. Explain the effect of rotation speed on frequency. Explain the effect of field excitation on output voltage.
Electrical Machines-I (EE-241) For S.E (EE)
PRACTICAL WORK BOOK For Academic Session 2013 Electrical Machines-I (EE-241) For S.E (EE) Name: Roll Number: Class: Batch: Department : Semester/Term: NED University of Engineer ing & Technology Electrical
LIMITED ANGLE TORQUE MOTORS
LIMITED ANGLE TORQUE MOTORS Limited Angle Torque Motors H2W Technologies Limited Angle Torque Motors are ideal for compact, limited angular excursion (
Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors
Pretest Module 21 Units 1-3 AC Generators & Three-Phase Motors 1. What are the two main parts of a three-phase 2. Which part of a three-phase squirrel-cage induction motor is a hollow core? 3. What are
DC Motor and Generator Theory By
DC Principles Study Unit DC Motor and Generator Theory By Robert Cecci iii Preview DC motors and generators are widely used in industrial applications. Both motors and generators are devices that produce
AG. 225 AGRICULTURAL SYSTEMS/ELECTRICITY AND HYDRAULICS
AG. 225 AGRICULTURAL SYSTEMS/ELECTRICITY AND HYDRAULICS COURSE DESCRIPTION: A course designed to develop skills in operation of tools and equipment, wiring, controls, electric motors, and hydraulics. UNITS