AWD18E CORDLESS DRILL AKUTRELL

Size: px
Start display at page:

Download "AWD18E CORDLESS DRILL AKUTRELL"

Transcription

1 AWD18E CORDLESS DRILL AKUTRELL Instruction Manual Kasutusjuhend Original instructions Originaaljuhendi tõlge Please read this handbook carefully before using the tool! Enne tööriista kasutamist loe juhend tähelepanelikult läbi! Isojoen Konehalli Oy, Keskustie 26, Kauhajoki As, Finland Tel (0)

2 Intended use This power tool is intended to be used for drilling holes and tightening or unscrewing screws. This power tool may not be used to do other thing out of the described scope. Explain the symbol: WARNING To reduce the risk of injury, user must read instruction manual In accordance with essential applicable safety standards of European directives General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools 2

3 may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. h) Recommendation for the operator to wear hearing protection. 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 6) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 3

4 Drill Safety Warnings: Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Screwdriver Safety Warning: Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. Only Ni-Cd Battery used in all battery pack Special Safety Instructions for Battery packet and Charger If under extreme conditions any electrolyte should escape from the battery, it's essential to avoid contact with skin. If electrolyte does come into contact with your skin, rinse it off with water. In the event of electrolyte contact with your eyes, it's essential to consult a doctor. a) This appliance is not intended for use by persons(including children)with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their by person responsible for their safety. b) Children should be supervised to ensure that they do not play with the appliance. c) Before the use of the charger and the battery packet, read the instruction manual for it carefully. d) During the charge process, the current used should correspond to the current of the battery charger. e) Never let moisture, rain or splashed water reaches the charging location. f) The ambient temperature must not exceed 40 o C. Never expose the device to direct insulation. g) Only switch off the current when the battery packet has been inserted into the box or has been pulled out of the box. h) Storage-battery packet, which are defective or damaged or can no longer be recharged, must be disposed of as hazardous waste. Hand them over at a special collection point. Never harm our environment. Do not throw unusable storage-battery packet away into the domestic waste, into fire or into water. i) If the electrical cable is damaged, the wire may only be replaced by the supplier or by his repair workshop. Have repairs carried out only by an authorized specialist only. j) Use only storage-battery packet, which have been produced by the original manufacturer. k) Always keep the surface of the charger free from dust and dirt. l) Insert the battery packet into the charger. Follow the guidelines provided concerning polarity. m) Always remove battery packet before working on the machine n) When the battery packet is outside the drill, cover the contacts to avoid short circuits (e.g. from tools) o) Do not throw Ni-Cd batteries into water or fire, risk of explosion! p) Protect the battery packet from impacts, and don't open it. 4

5 q) Never discharge the battery packet completely and recharge occasionally if not used for a prolonged period. Residual risks Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool s construction and design: 1. Damage to lungs if an effective dust mask is not worn. 2. Damage to hearing if effective hearing protection is not worn. 3. Health defects resulting from vibration emission if the power tool is being used over longer period of time or not adequately managed and properly maintained. WARNING! This machine produces an electromagnetic field during operation. This field may under some circumstances interfere with active or passive medical implants. To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their physician and the medical implant manufacturer before operating this machine. Technical Data Model Rated Voltage AWD18E KD LI 18VDC No-load Speed For KD529 Series: 0-350/ min -1 Range of Drill Bit sizes mm Declaration of the noise emission values according to EN (considered uncertainty 3 db) - Sound pressure level 82.3dB(A) - Sound power level 93.3dB(A) Declaration of the vibration emission according to EN (considered uncertainty 1.5 m/s 2 ) Impact drill mode: m/s 2 Drill mode: 4.87m/s 2 Screwdriver without drill mode:0.692m/s 2 Wear hearing protection while operating the power tool. The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another. The declared vibration total value may also be used in a preliminary assessment of exposure. Warning The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used. There is the need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). 5

6 Initial operation For Li-ion Insert battery pack into the bottom of the handle ( until click ) Remove the battery pack by pressing the two release buttons on the battery pack at the same time and by pulling the battery pack out. 1. Cordless drill 2. Battery pack 3. Release button Charging 1) For slowly charging ( S series battery pack and slowly charging charger) Put the battery pack in the charger stand. Make sure it is placed correctly ( + and - ) Insert the connector plug into the charger Plug in the socket-outlet( 230V~ ) When the indicator light starts burning this means the battery pack is now being charged. Normally it will take 3-5 hours to fully charge the battery. The indicator light will keep burning, even after the battery is fully charged! Unplug the plug after charging 2) For quickly charging (Q series battery pack and quickly charging charger) Put the battery pack in the charger. Make sure it is placed correctly ( + and - ) Plug in the socket-outlet( 230V~ ) When the indicator light starts burning this means the battery pack is now being charged. Normally it will take 1 hour to fully charge the battery. When the red indicator light turned off, this means the battery is fully charged. Unplug the plug after charging Caution Fully charge battery before first use. The battery will reach full capacity after being charged and discharged several times Avoid short periods of charging. Only charge battery pack when fully empty. Adaptor, charger and battery pack will be warm when charging. This is normal. Inserting drill bits / screwdriver bits To insert a drill bit / screwdriver bit, hold the back section of the chuck and rotate the front section of the chuck Insert the drill bit / screwdriver bit into the chuck ( as far as possible ) For screwdriver bits use an adaptor Select the correct screwdriver bit to avoid damaging the screw Firmly tighten the chuck by hand and check if the drill bit / screwdriver bit is seated firmly in the chuck 6

7 1. Front section of chuck 2. Back section of chuck On/off switch To switch on the tool, press the on/off switch To switch off the tool, release the on/off switch Left/right switch / shown on the left/righ switch Set the Left/right switch to Set the Left/right switch to Change the direction of rotation only when the machine is not in operation! Caution Operating the machine with a low speed for a long time will increase the risk that the motor will be overheated. To prevent overheating, let the motor cool down regularly ( Stop using the machine for 15 minutes ) Variable speed Applying more pressure to the On/off switch will increase the speed. Applying less pressure to the On/off switch will decrease the speed. Lower/higher Speed selecting: (only for KD518-2 series) Lower speed: switch Speed convert button to position 1. Higher speed: switch Speed convert button to position 2. Torque setting The torque setting will help you regulate the driving power when using a screwdriver bit. This will help to prevent damage to the workpiece and/or screw. For drilling set the torque selector to the position indicated by the drill bit symbol. Advice: Always start with the lowest torque setting ( 1 ) and increase if necessary. Maintenance and Cleaning Attention! Always remove the battery before carrying out any work on the machine. To clean, always use a dry or moist, but not wet, towel. Many cleaning agents contain chemical substances which may cause damage to the plastic parts of the machine. Therefore do not use any strong or inflammable cleaners such as petrol, paint thinner, turpentine or similar cleaning agents. Always keep air ventilation holes free of dust deposits to prevent overheating. 7

8 Kasutusotstarve See elektritööriist on mõeldud aukude puurimiseks ning kruvide kinni- või lahtikeeramiseks. Seda elektriööriista ei tohi kasutada muuks kui eelmainitud otstarbeks. Sümbolite tähendus: Elektriseadmeid ei tohi visata olmeprügi hulka. Vii elektriseade kas jäätmejaama või lähimasse kogumispunkti. Täpsemat infot saad kohalikust omavalitsusest või seadme müüjalt. HOIATUS Kehavigastuste ohu vähendamiseks tuleb läbi lugeda kasutusjuhendi Vastab Euroopa Liidu direktiividega kehtestatud põhilistele ohutusstandarditele Üldised ohutusnõuded elektritööriista kasutamisel HOIATUS! Loe läbi kõik ohutusnõuded ja juhised. Kui ohutusnõudeid ja juhiseid ei järgita, võib tagajärjeks olla elektrilöök, tulekahju ja/või rasked kehavigastused. Hoia kõik ohutusnõuded ja juhised hilisemaks vajaduseks alles. Mõiste elektritööriist kõigis järgnevates hoiatustes tähistab kas vooluvõrgutoitega (juhtmega) elektritööriista või akutoitega (juhtmeta) elektritööriista. 1) Tööpiirkonna ohutus a) Jälgi, et tööpiirkond on korras ja hästi valgustatud. Korratu ja hämar tööpiirkond suurendab õnnetuste ohtu. b) Ära kasuta elektritööriistu plahvatusohtlikus keskkonnas nagu näiteks kergsüttiva vedeliku, gaasi või tolmu läheduses. Elektritööriistad tekitavad sädemeid, mis võivad tolmu või aurud põlema süüdata. c) Elektritööriista kasutamise ajal jälgi, et lapsed ja kõrvalised isikud püsivad eemal. Kui tähelepanu hajub, võid kaotada kontrolli seadme üle. 2) Elektriohutus a) Elektritööriista toitejuhtme pistik peab sobima pistikupessa. Ära kunagi muuda pistiku ehitust. Ära kasuta (maandatud) elektritööriista vooluvõrku ühendamiseks adapterpistikuid. Muutmata kujul toitejuhtme pistik ja sobiv pistikupesa vähendavad elektrilöögiohtu. b) Väldi kokkupuudet maandatud pindadega nagu torud, radiaatorid, pliit ja külmik. Kokkupuude maandatud pinnaga suurendab elektrilöögiohtu. c) Ära jäta elektritööriistu vihma kätte ega märga kohta. Elektritööriista sisemusse pääsenud vesi suurendab elektrilöögiohtu. d) Väldi toitejuhtme vigastamist. Ära kunagi hoia kinni toitejuhtmest, kui kannad või tõmbad elektritööriista või eemaldad selle pistikut pistikupesast. Hoia toitejuhe eemal kuumusest, õlist, teravatest servadest ja seadme liikuvatest osadest. Viga saanud või keerdus toitejuhe suurendab elektrilöögiohtu. e) Kui kasutad elektritööriista õues, siis kasuta ka õues töötamiseks mõeldud pikendusjuhet. Õues kasutamiseks mõeldud pikendusjuhe vähendab elektrilöögiohtu. 8

9 f) Kui ei ole võimalik vältida elektritööriista kasutamist niiskes kohas, siis kasuta pistikupesa, millel on rikkevoolukaitse. Rikkevoolukaitsme kasutamine vähendab elektrilöögiohtu. 3) Kasutaja ohutus a) Ole elektritööriista kasutades tähelepanelik, keskendu ning rakenda tervet mõistust. Ära kasuta elektritööriista siis, kui oled kas väsinud või narkootikumide, alkoholi või ravimite mõju all. Elektritööriistu kasutades võib isegi hetkeline tähelepanematus põhjustada kehavigastusi. b) Kanna isikukaitsevahendeid. Elektritööriista kasutades kanna alati kaitseprille. Sobivas olukorras vähendavad ohutusvahendid nagu tolmumask, libisematud jalanõud, tugev peakate ja kõrvaklapid kehavigastuste ohtu. c) Välista tööriista juhuslik käivitumine. Enne toitepistiku pistikupessa või aku seadmesse ühendamist, samuti enne seadme kättevõtmist või transportimist veendu, et toitelüliti on väljalülitatud asendis. Õnnetusoht suureneb, kui hoiad elektritööriista kandes sõrme toitelülitil või lülitad sisse seadme, mille toitelüliti on sisselülitatud asendis (ON). d) Enne elektritööriista sisse lülitamist eemalda kõik reguleervõtmed ja mutrivõtmed. Elektritööriista pöörleva osa külge jäetud mutri- või reguleervõti võib põhjustada kehavigastusi. e) Ära küünita üle seadme ega selle läheduses. Seisa kindlal pinnal ja hoia kogu aeg tasakaalu. Nii saad elektritööriista ootamatus olukorras paremini kontrollida. f) Kanna sobivaid rõivaid. Ära kanna lohmakaid rõivaid ega ehteid. Hoia juuksed, rõivad ja kindad liikuvatest osadest eemal. Lohmakad rõivad, ehted ja pikad juuksed võivad liikuvate osade külge kinni jääda. g) Kui on olemas tolmueemaldus- ja tolmukogumisseadmed, siis kontrolli, kas need on õigesti ühendatud ja töökorras. Tolmukogumisseadme kasutamine võib vähendada tolmuga seotud ohte ja terviseriske. h) Seadme kasutajal on soovitatav kanda kõrvaklappe. 4) Elektritööriista kasutamine ja hooldus a) Ära rakenda elektritööriistale jõudu. Kasuta käsilolevaks tööks õiget elektritööriista. Õige tööriistaga ja õigel kiirusel sujub töö tõhusamalt ja ohutumalt. b) Ära kasuta elektritööriista, mille toitelüliti ei tööta (ei lülita seadet sisse ega välja). Elektritööriist, mille toitelüliti ei tööta, on ohtlik ja tuleb lasta ära parandada. c) Enne reguleerimist, tarvikute vahetamist või seadme hoiukohta panekut eemalda toitejuhtme pistik pistikupesast või ühenda aku elektritööriista küljest lahti. Nii vähendad elektritööriista juhusliku käivitumise ohtu. d) Elektritööriistu, mida ei kasutata, tuleb hoida väljaspool laste käeulatust. Elektritööriista ei tohi kasutada inimesed, kes pole tutvunud seadme tööpõhimõtte ega kasutusjuhistega. Ebapädeva kasutaja käes on elektritööriistad ohtlikud. e) Hoolda elektriööriistu. Kontrolli, kas liikuvad osad paiknevad õigesti, ega mõni osa pole kinni kiilunud, katki läinud, samuti kontrolli kõike muud, mis võib mõjutada seadme tööd. Kahjustatud osad tuleb enne elektritööriista kasutamist lasta kas ära parandada või välja vahetada. Paljude õnnetuste põhjuseks on halvasti hooldatud elektritööriistad. f) Hoidke lõiketarvikud teravad ja puhtad. Korralikult hooldatud teravate servadega lõiketarvikud ei jää nii kergesti kinni ja neid on lihtsam juhtida. g) Elektritööriista ja selle tarvikuid kasutades järgi kasutusjuhiseid ning võta arvesse töötingimusi ja tehtava töö iseloomu. Elektritööriista kasutamine muuks kui ettenähtud otstarbeks võib põhjustada ohuolukordi. 5) Aku kasutamine ja hooldus a) Lae akut ainult tootja soovitatud laaduriga. Ühte tüüpi akule sobiv laadur võib teist tüüpi akudega kasutatuna põhjustada tulekahjuohu. b) Kasuta ainult sellele elektritööriistale mõeldud akusid. Muud tüüpi akude kasutamine põhjustab vigastus- ja tulekahjuohu. c) Kui akut ei kasutata, hoia see eemal metallesemetest nagu kirjaklambrid, mündid, võtmed, naelad, kruvid jm väikesed metallesemed, mis võivad aku kontaktide vahel ühenduse luua. Aku kontaktide lühistamine võib põhjustada põletushaavu või tulekahju. d) Ebasoodsatel tingimustel võib akudest lekkida vedelikku väldi kokkupuudet akuvedelikuga! Akuvedelikuga kokku puutunud kohta tuleb viivitamatult veega loputada. Kui akuvedelik satub silma, pöördu arsti poole. Lekkinud akuvedelik võib põhjustada nahaärritust või põletushaavu. 9

10 6) Hooldus a) Vii elektritööriist hooldada volitatud hooldustöökotta, kus kasutatakse ainult originaalvaruosi. Nii on elektritööriist ka edaspidi ohutu. Ohutusnõuded trellina kasutamisel: Löökpuurimise ajal kanna kuulmiskaitsmeid. Müra võib põhjustada kuulmiskahjustusi. Kasuta kõiki seadmega kaasasolevaid käepidemeid. Seadme üle kontrolli kaotamine võib põhjustada kehavigastusi. Kui teed tööd, kus on oht, et lõikeriist võib puutuda vastu peidetud juhtmeid või toitejuhet, siis hoia elektritööriista isoleeritud pidemetest. Kokkupuude voolu all oleva juhtmega tähendab, et voolu alla satuvad ka kõik elektritööriista metallosad, mis võivad anda kasutajale elektrilöögi. Ohutusnõuded kruvitsana kasutamisel: - Kui teed tööd, kus on oht, et lõikeriist võib puutuda vastu peidetud juhtmeid, siis hoia elektritööriista isoleeritud pidemetest. Kokkupuude voolu all oleva juhtmega tähendab, et voolu alla satuvad ka kõik elektritööriista metallosad, mis võivad anda kasutajale elektrilöögi. Kõigis tööriistades on kasutusel ainult nikkelkaadmiumakud Eraldi ohutusjuhised aku ja laaduri kasutamisel Kui äärmuslike tingimuste korral peaks akuvedelik akust välja lekkima, on oluline vältida selle sattumist nahale. Kui akuvedelik puutub kokku nahaga, loputa see veega maha. Kui akuvedelik satub silma, on tarvis pöörduda arsti poole. a) Seda seadet ei tohi kasutada isikud (sh lapsed), kellel on füüsiline, sensoorne või vaimne puue ega isikud, kellel pole eelnevaid teadmisi või kogemusi, välja arvatud juhul, kui nad on nende ohutuse eest vastutava isiku järelevalve all või kui see isik on neid õpetanud seadet kasutama. b) Jälgi, et lapsed ei mängiks seadmega. c) Enne laaduri ja aku kasutamist loe tähelepanelikult läbi nende kohta käiv kasutusjuhend. d) Laadimise ajal peaks kasutatav voolutugevus vastama akulaaduri omale. e) Jälgi, et laadimiskohas poleks niiskust, sademeid ega veepritsmeid. f) Laadimiskoha keskkonnatemperatuur ei tohi olla üle 40 o C. Ära lase laaduril kokku puutuda otsese isolatsiooniga. g) Lülita vool välja alles siis, kui aku on karbi sisse pandud või karbist välja võetud. h) Akud, mis on defektsed, viga saanud või mida ei saa enam laadida, tuleb viia ohtlike jäätmete kogumispunkti. Vii need kindlasti ohtlike jäätmete kogumiskohta. Akusid tavaprügi hulka visates kahjustad keskkonda. Ära viska kasutuskõlbmatuid akusid tavaprügi hulka, tulle ega vette. i) Kui elektrijuhe on viga saanud, tohib selle välja vahetada üksnes seadme müüja või volitatud hooldustöökoda. Vii seade parandamiseks üksnes volitatud asjatundjale. j) Kasuta ainult originaalakusid. k) Hoia laaduri pind alati tolmust ja mustusest puhas. l) Aseta aku laadurisse. Järgi polaarsuse kohta käivaid juhiseid. m) Eemalda seadmest aku alati enne seadme hooldamist, parandamist vms tööd. n) Kui hoiad akut trellist väljavõetuna, kata kontaktid kinni, et vältida (nt tööriistade põhjustatud) lühiseid. o) Ära viska nikkelkaadmiumakusid vette ega tulle plahvatusoht! p) Kaitse akut löökide eest ning ära ava aku korpust. 10

11 q) Ära kunagi lase akul täielikult tühjeneda, kui akut pikemat aega ei kasutata, siis lae see aeg-ajalt täis. Jääkohud Isegi kui tööriista kasutatakse juhiseid järgides, ei ole võimalik kõrvaldada kõiki jääkohtusid. Tööriista ülesehituse ja konstruktsiooni tõttu võivad tekkida järgmised ohud: 1. Kopsukahjustused juhul, kui ei kanta tõhusat tolmumaski. 2. Kuulmiskahjustused juhul, kui ei kanta tõhusaid kuulmiskaitsmeid/kõrvaklappe. 3. Vibratsioonist põhjustatud tervisehäired juhul, kui elektritööriista kasutatakse järjest pikka aega, seda ei käsitseta nõuetekohaselt ning seda pole õigesti hooldatud. HOIATUS! Seade tekitab töötamise ajal elektromagnetvälja. See elektromagnetväli võib teatud juhtudel häirida aktiivsete või passiivsete meditsiiniliste implantaatide tööd. Raskete või eluohtlike vigastuste ohu vähendamiseks soovitame, et inimesed, kellel on meditsiiniline implantaat, peaksid enne selle seadme kasutamist nõu arstiga ja oma implantaadi tootjaga. Tehnilised andmed Mudel Nimipinge AWD18E KD LI 18 V DC Kiirus tühikäigul Seeria KD529: 0 350/ min -1 Puuriotste suurused 0,8 10 mm Standardi EN järgi deklareeritud müraemissiooni väärtused (mõõtemääramatus 3 db) - Helirõhutase 82,3 db(a) - Helivõimsustase 93,3 db(a) Standardi EN järgi deklareeritud müraemissiooni väärtused (mõõtemääramatus 1,5 m/s 2 ) Lööktrelli režiimil: 10,229 m/s 2 Trelli režiimil: 4,87 m/s 2 Kruvitsa režiimil (ilma puurita): 0,692 m/s 2 Seadmega töötades kanna kõrvaklappe. Märgitud vibratsiooni koguväärtus on mõõdetud kooskõlas standardse kontrollmeetodiga ning seda väärtust võib kasutada ühe tööriista teisega võrdlemiseks. Märgitud vibratsiooni koguväärtust võib kasutada ka kogetava vibratsioonihulga hindamiseks. Hoiatus Elektritööriista tegelikul kasutamisel tekkiv vibratsioonitase võib olla siinmainitust erinev, olenevalt tööriista kasutamise viisist. Isikukaitsevahendite kasutamise vajalikkuse määramisel tuleb arvesse võtta tegeliku kasutamise asjaolusid (töö kestus, seadme tühikäigul töötamise aeg, käivitumisaeg jms). 11

12 Seadme esmakasutus Liitiumioonakuga Lükka aku käepideme alaosast sisse (kuni kostab klõps). Aku eemaldamiseks vajuta korraga kahele akul olevale vabastusnupule ning tõmba aku välja. 1. Akutrell 2. Aku 3. Vabastusnupp Laadimine 1) Aeglaseks laadimiseks (S-tootesarja aku ja aeglaselt laadiv laadur) Pane aku laaduri alusele. Veendu, et polaarsused paiknevad õigesti (+ ja -). Ühenda toitejuhtme üks ots laaduri pessa. Ühenda toitejuhtme pistik pistikupessa (230 V ~). Kui märgutuli süttib, tähendab see, et akut laetakse. Tavajuhul kulub aku täis laadimiseks 3 5 tundi. Märgutuli põleb edasi ka siis, kui aku on täis laetud! Pärast laadimist eemalda toitejuhtme pistik pistikupesast. 2) Kiireks laadimiseks (Q-tootesarja aku ja kiirlaadur) Pane aku laadurisse. Veendu, et polaarsused paiknevad õigesti (+ ja -). Ühenda toitejuhtme pistik pistikupessa (230 V ~). Kui märgutuli süttib, tähendab see, et akut laetakse. Tavajuhul kulub aku täis laadimiseks 1 tund. Kui punane märgutuli kustub, tähendab see, et aku on täis laetud. Pärast laadimist eemalda toitejuhtme pistik pistikupesast. Ettevaatust! Enne esmakasutust lae aku täis. Aku saavutab täieliku mahutavuse pärast paari laadimis- ja tühjenemiskorda. Väldi lühikesi laadimiskordi. Lae akut ainult siis, kui see on täiesti tühi. Adapter, laadur ja aku soojenevad laadimise ajal. See on normaalne. Puuriotste/kruvitsaotste kinnitamine Puuriotsa/kruvitsaotsa kinnitamiseks hoia padruni tagaosast kinni ning keera padruni esiosa. Lükka puuriots/kruvitsaots padrunisse (nii kaugele kui võimalik). Kruvitsaotste kinnitamiseks kasuta adapterit. Vali õige kruvitsaots, et vältida kruvi kahjustamist. Keera padrun käega tugevalt kinni ning kontrolli, kas puuriots/kruvitsaots on padrunis kindlalt paigal. 12

13 1. Padruni esiosa 2. Padruni tagaosa Toitelüliti Tööriista sisselülitamiseks vajuta toitelülitile. Tööriista väljalülitamiseks vabasta toitelüliti. Pöörlemissuuna lüliti (parem/vasak) / tähis pöörlemissuuna lülitil Sea pöörlemissuuna lüliti asendisse Sea pöörlemissuuna lüliti asendisse Pöörlemissuunda tohib muuta ainult siis, kui seade parajasti ei tööta! Ettevaatust! Kui seade töötab pikka aega väikesel kiirusel, siis on suurem oht, et mootor kuumeneb üle. Ülekuumenemise vältimiseks lase mootoril regulaarselt maha jahtuda (jäta seadme kasutamine 15 minutiks katki). Kiiruse muutmine Kiiruse suurendamiseks vajuta toitelülitile tugevamalt, kiiruse vähendamiseks vähenda survet. Väiksema/suurema kiiruse valimine: Väiksem kiirus: lülita kiirusenupp asendisse 1. Suurem kiirus: lülita kiirusenupp asendisse 2. Väändejõud Väändejõu seadistamist on vaja siis, kui kasutad kruvitsaotsa, et reguleerida selle rakendatavat jõudu. See aitab vältida tooriku ja/või kruvi kahjustamist. Puurimise jaoks sea väändejõu valits asendisse, mis on tähistatud kruvitsaotsa sümboliga. Soovitus: alusta kruvimist alati kõige väiksema väändejõu astmega (1) ning vajaduse korral vali järgmine aste. Hooldamine ja puhastamine Tähelepanu! Enne seadme hooldamist või puhastamist eemalda sellest alati aku. Puhastamiseks kasuta alati kuiva või niisket, kuid mitte märga lappi. Paljud puhastusvahendid sisaldavad keemilisi aineid, mis võivad kahjustada seadme plastosi. Seetõttu ära kasuta tugevatoimelisi ega kergsüttivaid puhastusvahendeid nagu bensiin, värvilahusti, tärpentin vms. Ülekuumenemise vältimiseks hoia seadme ventilatsiooniavad alati tolmust puhtad. 13

14 EU Declaration of Conformity (Translation of the original EU Declaration of Conformity) We Isojoen Konehalli Oy Keskustie Kauhajoki As Tel (0) declare under our sole responsibility that the following product Equipment: Cordless drill Brand name: AWD Model/type: AWD18E (KD LI) is in conformity with the Machinery Directive (MD) 2006/42/EC Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and the following harmonized standards and technical specifications have been applied: MD: EN :2009+A11 ; EN :2010 ; EN :2010 RoHS: IEC :2013 ; IEC :2013 ; IEC :2013 ; IEC :2013 ; IEC :2013 ; IEC :2015 & IEC 62321:2008 ; IEC :2015 Kauhajoki Manufacturer: Isojoen Konehalli Oy Jani Pirttijärvi, Purchase Manager (authorized to compile the Technical File) EL-i vastavusdeklaratsioon (EL-i originaalvastavusdeklaratsiooni tõlge) Meie Isojoen Konehalli Oy Keskustie Kauhajoki As Tel: +358 (0) kinnitame ainuvastutajana, et alljärgnev toode Seade: Akutrell Kaubamärk: AWD Mudel/tüüp: AWD18E (KD LI) on vastavuses masinadirektiiviga (MD) 2006/42/EÜ ohtlike ainete kasutamise piiramise (RoHS) direktiiviga 2011/65/EÜ ning et rakendatud on järgmisi ühtlustatud standardeid ja tehnilisi kirjeldusi: MD: EN :2009+A11; EN :2010; EN :2010 RoHS: IEC :2013; IEC :2013; IEC :2013; IEC :2013; IEC :2013; IEC :2015 ja IEC 62321:2008; IEC :2015 Kauhajoki Tootja: Isojoen Konehalli Oy Jani Pirttijärvi, ostujuht (volitatud koostama tehnilist dokumenti) 14

15 Electrical and electronic equipment must not be disposed of with household waste. Instead, hand it over to a designated collection point for recycling. Contact your local authorities or retailer for further information. Elektri- ja elektroonikaseadmeid ei tohi visata ära koos olmeprügiga. Viige need jäätmejaama. Täiendava teabe saamiseks võtke ühendust kohaliku omavalitsuse või seadme müüjaga. Copyright 2017 Isojoen Konehalli Oy. All rights reserved. Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form without the written permission of Isojoen Konehalli Oy is prohibited. The content of this document is provided "as is". Except as required by applicable law, no express nor implied warranties of any kind, including the warranties of merchantability and suitability for a particular purpose, are made in relation to the accuracy, reliability or content of this document. Pictures in this document are indicative and may differ from the delivered product. Isojoen Konehalli Oy follows a policy of ongoing development and reserves the right to make changes and improvements to the product and this document without prior notice. EU Declaration of Conformity is not anymore valid and the warranty is voided if the technical features or other features of the product are changed without manufacturer s permission. Isojoen Konehalli Oy is not responsible for the direct or indirect damages caused by the use of the product. Autoriõigused 2017 Isojoen Konehalli Oy. Kõik õigused kaitstud. Selle dokumendi kopeerimine, edastamine, jagamine või hoiustamine kas tervikuna või osadena ilma Isojoen Konehalli Oy kirjaliku loata on keelatud. Selle dokumendi sisu on antud on nagu on. Välja arvatud kehtivate seaduste kohaselt, pole käesolevale dokumendile antud ei otsest ega kaudsed garantiid, k.a turustus- või otstarbekohasuse garantiid, mis puudutab dokumendi täpsust, usaldusväärsust või sisu. Käesolevas dokumendis sisalduvad pildid on illustratiivsed ja võivad tarnitud tootest erineda. Isojoen Konehalli Oy järgib pideva arendustöö põhimõtteid ning jätab endale õiguse toodet ja käesolevat dokumenti muuta või täiendada ilma sellest eelnevalt teatamata. EL-i vastavusdeklaratsioon ei ole enam kehtiv ja garantii muutub kehtetuks, kui toote tehnilisi omadusi või muid omadusi muudetakse ilma tootja loata. Isojoen Konehalli Oy ei vastuta toote kasutamisest tingitud otsese ega kaudse kahju eest. 15

Instruction Manual. CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION. Model SROM 1172

Instruction Manual. CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION. Model SROM 1172 Instruction Manual CORDLESS DRILL 18V Li-ion WITH IMPACT FUNCTION Model SROM 1172 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Product Features: 1. Keyless

More information

Instruction Manual CORDLESS DRILL & DRIVER 18V. Model SROM 1170

Instruction Manual CORDLESS DRILL & DRIVER 18V. Model SROM 1170 Instruction Manual CORDLESS DRILL & DRIVER 18V Model SROM 1170 Product Features: Dear Valued Customer, Thank you for purchasing this Samson Power Tool. We are dedicated to providing quality Samson Power

More information

Instruction Manual 4.0V Li-Ion Screwdriver. Part #: ECLIPSE ENTERPRISES, INC Chula Road, Amelia Court House, VA 23002, U.S.

Instruction Manual 4.0V Li-Ion Screwdriver. Part #: ECLIPSE ENTERPRISES, INC Chula Road, Amelia Court House, VA 23002, U.S. Instruction Manual 4.0V Li-Ion Screwdriver Part #: 902-588 ECLIPSE ENTERPRISES, INC. 13302 Chula Road, Amelia Court House, VA 23002, U.S.A 2 3 Intended use Your ECLIPSE ENTERPRISES, INC. 902-588 screwdriver

More information

RMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool

RMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool RMT1201 ORIGINAL INSTRUCTIONS Cordless Multi-Tool Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL

More information

eclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #:

eclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #: eclipse Instruction Manual 4.0V Li-Ion Screwdriver Part #: 902-588 Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com Test Equipment Depot - 800.517.8431-99

More information

SAFETY AND OPERATING MANUAL. Lithium-Ion cordless hammer drill WX372 WX372.1 WX372.9

SAFETY AND OPERATING MANUAL. Lithium-Ion cordless hammer drill WX372 WX372.1 WX372.9 SAFETY AND OPERATING MANUAL 2 Original Instructions General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result

More information

original instructions 18V Torch RFP1801

original instructions 18V Torch RFP1801 original instructions 18V Torch RFP1801 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL POWER

More information

RPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner

RPS1215 ORIGINAL INSTRUCTIONS. Cordless Pruner RPS5 ORIGINAL INSTRUCTIONS Cordless Pruner Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical modification.

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 9 5 8 7 6 A2 A1 1 2 B1 A3 3 2 1 C1 B2 2 3 1 C2 C3 C2 C3 D E F G -- -- -- = 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 8 9 5 7 6 A1 A2 1 2 1 3 2 A3 B1 A3 B1 3 2 1 B2 C1 2 3 1 C2 C3 D E1 1-18 D E1 E2 E3 F 1-18 6 1. CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR

More information

SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS

SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 2 3 4 9 8 5 6 7 A1 A2 1 2 1 3 2 A3 B1 3 2 1 B2 C1 2 3 1 C2 C3 C2 C3 D F E 1. KEYLESS CHUCK 2. TORQUE ADJUSTMENT RING 3. TWO-SPEED GEAR CONTROL 4. FORWARD/REVERSE

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS 1 7 6 2 5 4 2 3 A1 A2 1 2 A3 B A3 B C1 C2 3 C3 D 1. FORWARD/ REVERSE ROTATION CONTROL 2. SOFT GRIP HANDLE 3. BATTERY PACK RELEASE BUTTON 4. BATTERY PACK*

More information

TOOLPRO 18V Li-Ion Brushless Impact wrench

TOOLPRO 18V Li-Ion Brushless Impact wrench TOOLPRO 18V Li-Ion Brushless Impact wrench Instruction Manual CIW180HB.9 After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before

More information

18V CORDLESS DRILL DRIVER CDT16180

18V CORDLESS DRILL DRIVER CDT16180 18V CORDLESS DRILL DRIVER CDT16180 LX400 SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or

More information

SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS

SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS SAFETY AND OPERATING MANUAL ORIGINAL INSTRUCTIONS LITHIUM-ION BRUSHLESS DRILL DRIVER LITHIUM-ION BRUSHLESS HAMMER DRILL WU175 WU175.1 WU309 1 2 3 4 10 5 9 8 6 7 12 11 100% A1 A2 0% 1 2 A3 A4 B1 B2 2 C1

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill MT064 MT065 003947 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MT064 MT065 Steel 0 mm 3 mm Capacities Wood 25 mm 28 mm Wood

More information

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When

More information

12V CORDLESS DRILL DRIVER. Model HY2150. User Manual

12V CORDLESS DRILL DRIVER. Model HY2150. User Manual 12V CORDLESS DRILL DRIVER Model HY2150 User Manual CONTENTS Section Description Page N o /N o s 1. OWNER S MANUAL & SAFETY INSTRUCTIONS 3 2. GENERAL SAFETY 3 5 3. BATTERY PACK 5 6 4. CHARGING 6 5. INSERTING/REMOVING

More information

SSW 18 LTX 600 SSW 18 LTX 400 BL

SSW 18 LTX 600 SSW 18 LTX 400 BL SSW 18 LTX 600 SSW 18 LTX 400 BL en Operating Instructions 5 fr Mode d'emploi 9 es Instrucciones de manejo 13 www.metabo.com SSW 18 LTX 400 BL 1 SSW 18 LTX 600 1 2 3 2 3 4 5 7 4 7 6 6 9 8 9 8 10 2 11.

More information

R18DDBL ORIGINAL INSTRUCTIONS. 18V Brushless Drill Driver

R18DDBL ORIGINAL INSTRUCTIONS. 18V Brushless Drill Driver R18DDBL ORIGINAL INSTRUCTIONS 18V Brushless Drill Driver Important! It is essential that you read the instructions in this manual before assembling, operating and maintaining the product. Subject to technical

More information

PT-1441 Cordless Drill Driver 14.4V User s Manual

PT-1441 Cordless Drill Driver 14.4V User s Manual PT-1441 Cordless Drill Driver 14.4V User s Manual 1 st Edition, 2009 2009 Copy Right by Prokit s Industrial Co., Ltd. Please read this handbook carefully before using the tool General Safety Rules WARNING

More information

TOOLPRO 18V 2 Speed Drill Driver

TOOLPRO 18V 2 Speed Drill Driver TOOLPRO 18V 2 Speed Drill Driver Instruction Manual CDT218G.1 After Sales Support FREE CALL 1300 889 028 EMAIL:salesau@positecgroup.com Important - Please read these instructions fully before operating

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill 607D 637D 6337D 6347D 0089 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 607D 637D 6337D 6347D

More information

SAFETY AND OPERATING MANUAL. Cordless Hedge Trimmer WG259E WG259E.5 WG259E.9

SAFETY AND OPERATING MANUAL. Cordless Hedge Trimmer WG259E WG259E.5 WG259E.9 SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill 670D 680D 6390D R 0056 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 670D 680D 6390D Steel

More information

WR 22SE WR 25SE WR25SE. Handling instructions

WR 22SE WR 25SE WR25SE. Handling instructions WR 22SE WR 25SE WR25SE Handling instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric

More information

3.6V SCREWDRIVER INSTRUCTION MANUAL CSD36F

3.6V SCREWDRIVER INSTRUCTION MANUAL CSD36F 3.6V SCREWDRIVER INSTRUCTION MANUAL CSD36F ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions

More information

SAFETY AND OPERATING MANUAL. Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.4

SAFETY AND OPERATING MANUAL. Cordless rotary hammer WX382 WX382.1 WX382.2 WX382.3 WX382.4 SAFETY AND OPERATING MANUAL Original instructions 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result

More information

C O R D L E S S I M PA C T D R I V E R W I T H 1 2 V LI- I O N B AT T E RY OWNER S MANUAL

C O R D L E S S I M PA C T D R I V E R W I T H 1 2 V LI- I O N B AT T E RY OWNER S MANUAL C O R D L E S S I M PA C T D R I V E R W I T H 1 2 V LI- I O N B AT T E RY OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill FD0 008796 ENGLISH (Original instructions) SPECIFICATIONS Model FD0 Steel 0 mm (3/8") Capacities Wood 2 mm (3/6") Wood screw 5. mm x 63 mm (7/32" X 2-/2") Machine

More information

INSTRUCTION MANUAL. Cordless Angle Drill XAD01

INSTRUCTION MANUAL. Cordless Angle Drill XAD01 INSTRUCTION MANUAL Cordless Angle Drill XAD0 0474 ENGLISH (Original instructions) SPECIFICATIONS Model XAD0 Capacities Steel 0 mm (3/8") Wood 25 mm (") No load speed (RPM) 0 -,800 /min Overall length 34

More information

OPERATOR'S MANUAL. Cat. No. C12 PC. To reduce the risk of injury, user must read and understand operator's manual.

OPERATOR'S MANUAL. Cat. No. C12 PC. To reduce the risk of injury, user must read and understand operator's manual. OPERATOR'S MANUAL Cat. No. C12 PC M12 Cordless Copper Tubing Cutter To reduce the risk of injury, user must read and understand operator's manual. General POWER TOOL SAFETY WARNINGS WARNING Read all safety

More information

1200W CaR PoliSheR en RS4900

1200W CaR PoliSheR en RS4900 1200W Car Polisher RS4900 RS4900 8 1 2 7 3 4 5 6 A B flat nozzle C D E F 1200W Car Polisher RS4900 G H flat nozzle I J K L 4 1200W Car Polisher COMPONT LIST 1 2 3 4 5 6 7 Variable speed control Switch

More information

Cordless Line Trimmer

Cordless Line Trimmer RLT6X RLT6B ORIGINAL INSTRUCTIONS Cordless Line Trimmer Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating this machine. Subject to technical

More information

SFC 18 A SFC 22 A English

SFC 18 A SFC 22 A English SFC 18 A SFC 22 A English en 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a is a prerequisite for safe, trouble-free

More information

Cordless Impact Driver

Cordless Impact Driver ENGLISH: Original instructions INSTRUCTION MANUAL Cordless Impact Driver TD0D Read before use. SPECIFICATIONS Model: TD0D Fastening capacities Machine screw 4 mm - 8 mm Standard bolt High tensile bolt

More information

RD V RECIPRO/PRUNING SAW

RD V RECIPRO/PRUNING SAW RD2865 RD2865 7 1 6 2 3 5 4 8 9 RD2865 1 A B C 2 7 1 2 D E F1 F2 COMPONT LIST 1 2 3 4 5 6 7 8 9 TOOL-FREE BLADE CLAMP LEVER LOCK-OFF BUTTON HANDLE BATTERY PACK * BATTERY PACK RELEASE LATCH ON/OFF SWITCH

More information

Cordless Impact Wrench

Cordless Impact Wrench ENGLISH INSTRUCTION MANUAL Cordless Impact Wrench BTW0 00534 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH SPECIFICATIONS Capacities

More information

WR 16SE. de fr it nl es pt sv da no fi el pl hu cs tr ro sl sk bg sr hr uk ru. Handling instructions

WR 16SE. de fr it nl es pt sv da no fi el pl hu cs tr ro sl sk bg sr hr uk ru. Handling instructions en WR 16SE de fr it nl es pt sv da no fi el pl hu cs tr ro sl sk bg sr hr uk ru Handling instructions GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH: Original instructions INSTRUCTION MANUAL Cordless Driver Drill DF02D Read before use. SPECIFICATIONS Model: DF02D Drilling capacities Steel 5 mm Wood 6 mm Fastening capacities Wood screw ø3.8

More information

24V CORDLESS HAMMER DRILL

24V CORDLESS HAMMER DRILL 24V CORDLESS HAMMER DRILL CDI224MN ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result

More information

ELECTRIC ENGRAVER 15W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS WHAT S IN THE BOX. ozito.com.au. Electric Engraver

ELECTRIC ENGRAVER 15W WARRANTY INSTRUCTION MANUAL SPECIFICATIONS WHAT S IN THE BOX. ozito.com.au. Electric Engraver IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE

More information

Cordless Impact Wrench

Cordless Impact Wrench ENGLISH: Original instructions INSTRUCTION MANUAL Cordless Impact Wrench DTW90 Read before use. SPECIFICATIONS Model: DTW90 Fastening capacities Standard bolt M8 - M6 Square drive High tensile bolt M8

More information

FMC641

FMC641 3 8 4 7 2 1 6 5 www.stanley.eu FMC641 ENGLISH (Original instructions) 5 6 5 10 A 11 B 13 4 13 3 C1 C2 D 1 2 D 2 (Original instructions) ENGLISH Intended use Your Stanley Fat Max FMC641 impact wrench has

More information

ELECTRIC CAR POLISHER

ELECTRIC CAR POLISHER ELECTRIC CAR POLISHER MODEL NO: CP254 PART NO: 6462108 OPERATION & MAINTENANCE INSTRUCTIONS LS0610 INTRODUCTION Thank you for purchasing this CLARKE electric car polisher. Before attempting to use this

More information

Cordless Impact Driver JCB-ID20LIBL

Cordless Impact Driver JCB-ID20LIBL Safety and operating manual Cordless Impact Driver JCB-ID20LIBL ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings

More information

Belt Sander JCB-BS950

Belt Sander JCB-BS950 Safety and operating manual Belt Sander JCB-BS950 ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions

More information

HDE 500-A22. English. Printed: Doc-Nr: PUB / / 000 / 03

HDE 500-A22. English. Printed: Doc-Nr: PUB / / 000 / 03 HDE 500-A22 English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling and

More information

SFC 14 A SFC 22 A English

SFC 14 A SFC 22 A English SFC 14 A SFC 22 A English 1 Information about the documentation 1.1 About this documentation Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free handling

More information

Cordless Impact Driver

Cordless Impact Driver ENGLISH: Original instructions INSTRUCTION MANUAL Cordless Impact Driver DTD5 Read before use. SPECIFICATIONS Model: DTD5 Fastening capacities Machine screw 4 mm - 8 mm Standard bolt High tensile bolt

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill DDF343 DDF453 009075 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DDF343 DDF453 Steel 0 mm

More information

Cordless Impact Wrench

Cordless Impact Wrench ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Impact Wrench DTW50 DTW5 007450 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DTW50 DTW5 Capacities Standard

More information

W6VB3 W8VB2. Handling instructions

W6VB3 W8VB2. Handling instructions Screw Driver Model W 6VM W 6V4 W 6VA4 W 6VB3 W 8VB2 Handling instructions W6VM W6V4 W6VA4 W6VB3 W8VB2 Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to

More information

EVO181B1. English

EVO181B1. English EVO181B1-TW EVO181B1-KR EVO181B1 English 4 10 16 A B 8 C EVO181B1-KR EVO181B1-TW D 2 E 13 8 9 EVO181B1-KR EVO181B1-TW F 3 ENGLISH (Original instructions) EVO181B1 MULTI TOOL Technical data Multi Tool Voltage

More information

GTC650L-XE Australia New Zealand

GTC650L-XE Australia New Zealand www.blackanddecker.com.au GTC650L-XE Australia New Zealand 2 11 D1 D2 D3 D4 3 ENGLISH (Original instructions) Intended use Your Black & Decker hedgetrimmer has been designed for trimming hedges, shrubs

More information

18V CORDLESS DRILL MODEL NO: CON18LiC

18V CORDLESS DRILL MODEL NO: CON18LiC 18V CORDLESS DRILL MODEL NO: CON18LiC PART NO: 6479531 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0817 - ISS 2 INTRODUCTION Thank you for purchasing this CLARKE Cordless Drill. Before

More information

Cat. No. M18 Cordless multi-tool. To reduce The risk of injury, user must read and understand operator's manual.

Cat. No. M18 Cordless multi-tool. To reduce The risk of injury, user must read and understand operator's manual. OPERATOR'S MANUAL Cat. No. M18 Cordless multi-tool To reduce The risk of injury, user must read and understand operator's manual. 2 General POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings and

More information

4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT

4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT SKU 241-1394 4-VOLT LITHIUM-ION AUTO-LOAD SCREWDRIVER w/led WORKLIGHT Operation Manual WARNING! Please read this manual before using this product. Failure to do so can result in serious injury. SAVE THIS

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill 6095D 002032 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Cordless Hedge Trimmer Taille-haies sans fil Cortasetos Inalámbrico EN F ES P05 P12 P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280.

Cordless Hedge Trimmer Taille-haies sans fil Cortasetos Inalámbrico EN F ES P05 P12 P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280. Taille-haies sans fil Cortasetos Inalámbrico F ES P05 P12 P20 WG255 WG255.1 WG255.9 WG275 WG275.9 WG280 WG280.9 2 5 3 6 4 7 1 8 9 A B1 1 2 1 3 B2 C C B2 1 2 D1 D2 D3 E 1. BATTERY PACK* 2. REAR HANDLE

More information

Power Paint Scraper 200W CPS-200. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Power Paint Scraper 200W CPS-200. To view the full range visit:  Instruction Manual 3 Year Replacement Warranty Power Paint Scraper 200W Instruction Manual 3 Year Replacement Warranty CPS-200 WARNING! Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Cordless Angle Drill DA330D DA331D. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Cordless Angle Drill DA330D DA331D. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Angle Drill DA330D DA33D 03258 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DA330D DA33D Capacities Steel

More information

20V Cordless Shrub Shear & Grass Shear P02 P10 P15 WG801 WG801.9

20V Cordless Shrub Shear & Grass Shear P02 P10 P15 WG801 WG801.9 P02 P0 P5 WG80 WG80.9 2 WARNING: Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to the state of California to cause cancer, birth

More information

QUICK CONNECT SYSTEM 18V POWER UNIT & DRILL ATTACHMENT Australia BDCDMT180 New Zealand

QUICK CONNECT SYSTEM 18V POWER UNIT & DRILL ATTACHMENT Australia BDCDMT180 New Zealand QUICK CONNECT SYSTEM 18V POWER UNIT & DRILL ATTACHMENT www.blackanddecker.com.au BDCDMT180 Australia New Zealand 5 A B C D E 2 (Original instructions) ENGLISH Intended use Your Black & Decker MATRIX multi-purpose

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Cordless Nibbler BJN160 BJN161. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Cordless Nibbler BJN160 BJN161. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Nibbler BJN60 BJN6 07 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model BJN60 BJN6 Steel up to 400 N/mm.6 mm

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill XFD0 0360 ENGLISH (Original instructions) SPECIFICATIONS Model XFD0 Steel 3 mm (/") Capacities Wood 38 mm (-/") Wood screw 0 mm x 89 mm (3/8" X 3-/") Machine screw

More information

In-line Cordless Driver Drill

In-line Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL In-line Cordless Driver Drill DF00D 008706 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DF00D Steel 5 mm Capacities

More information

2W COB + 1W LED Rechargeable Inspection Lamp Stock Nos Part Nos. CRIL/COB/BL CRIL/COB/OR CRIL/COB/GR CRIL/COB/YW

2W COB + 1W LED Rechargeable Inspection Lamp Stock Nos Part Nos. CRIL/COB/BL CRIL/COB/OR CRIL/COB/GR CRIL/COB/YW INSTRUCTIONS FOR 2W COB + 1W LED Rechargeable Inspection Lamp Stock Nos.82679 Part Nos. CRIL/COB/BL 82684 CRIL/COB/OR 82685 CRIL/COB/GR 82688 CRIL/COB/YW IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY

More information

WHAT S IN THE BOX METAL CUTTING SHEARS. Metal Cutting Shears 500W INSTRUCTION MANUAL SPECIFICATIONS. Hex Key. Max. Thickness: ozito.com.

WHAT S IN THE BOX METAL CUTTING SHEARS. Metal Cutting Shears 500W INSTRUCTION MANUAL SPECIFICATIONS. Hex Key. Max. Thickness: ozito.com. WHAT S IN THE BOX METAL CUTTING SHEARS 500W INSTRUCTION MANUAL SPECIFICATIONS Motor: No load speed: Max. Thickness: Tool weight: 500W 0 1,600 rpm 1.2mm 2.2kg Metal Cutting Shears Hex Key ozito.com.au MCS-5000

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Cordless Angle Drill DDA340 DDA350. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Cordless Angle Drill DDA340 DDA350. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Angle Drill DDA340 DDA350 008950 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DDA340 DDA350 Capacities

More information

Cordless Impact Wrench

Cordless Impact Wrench ENGLISH: Original instructions INSTRUCTION MANUAL Cordless Impact Wrench DTW84 DTW85 Read before use. SPECIFICATIONS Model: DTW84 DTW85 Fastening Standard bolt M0 - M0 capacities High tensile bolt M0 -

More information

Power Carver 50W CPC-050. To view the full range visit: Instruction Manual 3 Year Replacement Warranty

Power Carver 50W CPC-050. To view the full range visit:   Instruction Manual 3 Year Replacement Warranty Power Carver 50W Instruction Manual 3 Year Replacement Warranty CPC-050 WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,

More information

Screwdriver. 4 Volt. Operator s Manual. Model No

Screwdriver. 4 Volt. Operator s Manual. Model No Operator s Manual 4 Volt Screwdriver Model No. 7.47700 CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this manual before using this product. Sears Brands Management

More information

Cordless Rechargeable Saw Instructions for Use

Cordless Rechargeable Saw Instructions for Use Technical data Voltage: DC 10.8V Weight: 1.25Kg Stroke rate: 0-2100/min Stroke: 15mm Cutting capacity: max diameter in wood 80mm / in soft metal 7mm Charging time: Between 5.0-5.5 Hours Battery: 1.3Ah

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill DF330D 009329 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DF330D Steel 0 mm Capacities Wood

More information

Impact Screwdriver. 8 Volt MAX. Operator s Manual. Model No

Impact Screwdriver. 8 Volt MAX. Operator s Manual. Model No Operator s Manual 8 Volt MAX Impact Screwdriver Model No. 72.47720 CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this manual before using this product. Sears Brands

More information

OPERATOR'S MANUAL M12 FID M12 FUEL 1/4" HEX IMPACT DRIVER WARNING. Cat. No.

OPERATOR'S MANUAL M12 FID M12 FUEL 1/4 HEX IMPACT DRIVER WARNING. Cat. No. OPERATOR'S MANUAL Cat. No. M12 FID M12 FUEL 1/4" HEX IMPACT DRIVER WARNING To reduce the risk of injury, user must read and understand operator's manual. GENERAL POWER TOOL SAFETY WARNINGS WARNING Read

More information

Screwdriver. Cordless 3.6V. Operating Instructions XSD-360. XU1 Power tools

Screwdriver. Cordless 3.6V. Operating Instructions XSD-360. XU1 Power tools Cordless Operating Instructions XSD-360 Screwdriver 3.6V XU1 Power tools 1 23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Website: www.xuone.com.au XSD-360 0816 SAFETY INSTRUCTIONS

More information

CORDLESS COMBI DRILL JCB-CD18Li

CORDLESS COMBI DRILL JCB-CD18Li SAFETY AND OPERATING MANUAL CORDLESS COMBI DRILL JCB-CD18Li Original Instructions General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings

More information

18V CORDLESS COMBI DRILL MODEL NO: CON18NI

18V CORDLESS COMBI DRILL MODEL NO: CON18NI CON18NI.fm Page 1 Tuesday, August 21, 2012 11:53 AM 18V CORDLESS COMBI DRILL MODEL NO: CON18NI PART NO: 6485067 OPERATION & MAINTENANCE INSTRUCTIONS LS0812 CON18NI.fm Page 2 Tuesday, August 21, 2012 11:53

More information

ENGLISH. (Original instructions)

ENGLISH. (Original instructions) FMC675 ENGLISH (Original instructions) A B C 2 (Original instructions) ENGLISH Intended use Your Stanley FatMax reciprocating saw has been designed for sawing wood, plastics and sheet metal. This tool

More information

R18IW7. ORIGINAL INSTRUCTIONS 18V Brushless Impact Wrench

R18IW7. ORIGINAL INSTRUCTIONS 18V Brushless Impact Wrench R18IW7 ORIGINAL INSTRUCTIONS 18V Brushless Impact Wrench Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical

More information

Challenge Xtreme 18V CORDLESS HAMMER DRILL

Challenge Xtreme 18V CORDLESS HAMMER DRILL Challenge Xtreme 18V CORDLESS HAMMER DRILL Assembly Manual-Original Instructions After Sales Support UK/Ireland 0345 640 0800 Web WWW.ARGOS.CO.UK Important - Please read these instructions fully before

More information

CORDLESS GLUE GUN. 7.2V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au GGL-7000 WHAT S IN THE BOX. Cordless Glue Gun.

CORDLESS GLUE GUN. 7.2V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au GGL-7000 WHAT S IN THE BOX. Cordless Glue Gun. WHAT S IN THE BOX CORDLESS GLUE GUN 7.2V Lithium Ion INSTRUCTION MANUAL SPECIFICATIONS Input: 7.2V Glue Stick Diameter: 7.2mm Glue Stick Length: 190mm Heating Time: 15sec Working Time: 45min Battery Power:

More information

CORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414

CORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414 CORDLESS TACKER MODEL NO: CCT48 PART NO: 6485070 OPERATION & MAINTENANCE INSTRUCTIONS LS0414 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read

More information

Drill Driver. Cordless 18V. Operating Instructions XDD-180. XU1 Power tools

Drill Driver. Cordless 18V. Operating Instructions XDD-180. XU1 Power tools Cordless Operating Instructions XDD-180 18V Drill Driver XU1 Power tools 1 23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Website: www.xuone.com.au XDD-180 0916 1 2 3 4 5

More information

SBC12 H Operating instructions Mode d emploi Manual de instrucciones

SBC12 H Operating instructions Mode d emploi Manual de instrucciones *254901* 254901 SBC12 H Operating instructions Mode d emploi Manual de instrucciones Safety Precautions Read all Instructions GENERAL SAFETY RULES FOR ALL BATTERY OPERATED TOOLS WARNING! Read and understand

More information

E-DRIV MD-Series DC Torque Control System Calibration Procedure

E-DRIV MD-Series DC Torque Control System Calibration Procedure Revision: 1.1 July 05, 2017 E-DRIV MD-Series DC Torque Control System Calibration Procedure www.mountztorque.com 1080 N 11 th St - San Jose CA 95112-408.292.2214 1 GENERAL SAFETY RULES WARNING! Read and

More information

OPERATOR'S MANUAL WARNING. Cat. No. M18 FMTIWP12, M18 FMTIWF12 M18 FUEL MID-TORQUE IMPACT WRENCHES

OPERATOR'S MANUAL WARNING. Cat. No. M18 FMTIWP12, M18 FMTIWF12 M18 FUEL MID-TORQUE IMPACT WRENCHES OPERATOR'S MANUAL Cat. No. M18 FMTIWP12, M18 FMTIWF12 M18 FUEL MID-TORQUE IMPACT WRENCHES WARNING To reduce the risk of injury, user must read and understand operator's manual. GENERAL POWER TOOL SAFETY

More information

20V Lithium-Ion Cordless Combi Drill JCB-CD20LIBL

20V Lithium-Ion Cordless Combi Drill JCB-CD20LIBL Safety and operating manual 20V Lithium-Ion Cordless Combi Drill JCB-CD20LIBL ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to

More information

OFF SAFETY AND OPERATING MANUAL 120W CAR BUFFER/POLISHER

OFF SAFETY AND OPERATING MANUAL 120W CAR BUFFER/POLISHER OFF ON SAFETY AND OPERATING MANUAL 120W CAR BUFFER/POLISHER Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from it so this

More information

OPERATOR'S MANUAL M12 FIR38, M12 FIR12 M12 FUEL RATCHETS WARNING. Cat. No.

OPERATOR'S MANUAL M12 FIR38, M12 FIR12 M12 FUEL RATCHETS WARNING. Cat. No. OPERATOR'S MANUAL Cat. No. M12 FIR38, M12 FIR12 M12 FUEL RATCHETS WARNING To reduce the risk of injury, user must read and understand operator's manual. GENERAL POWER TOOL SAFETY WARNINGS WARNING Read

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Cordless Recipro Saw DJR181 DJR182. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Cordless Recipro Saw DJR181 DJR182. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Recipro Saw DJR8 DJR82 006896 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DJR8 DJR82 Length of stroke

More information

Safety instructions ENGLISH. General power tool safety warnings. (Original instructions)

Safety instructions ENGLISH. General power tool safety warnings. (Original instructions) FME500 A B C 2 (Original instructions) ENGLISH Intended use Your Stanley Fat Max rotary hammer drill has been designed for drilling in wood, metal, plastics, and masonry as well as for light chiselling

More information

Screwdriver. CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this manual before using this product.

Screwdriver. CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this manual before using this product. Screwdriver CAUTION: Read, understand and follow all Safety Rules and Operating Instructions in this manual before using this product. Sears Brands Management Corporation, Hoffman Estates, IL 6079 U.S.A.

More information

ATD V CORDLESS LITHIUM ION DRILL & DRIVER COMBO KIT Instruction Manual

ATD V CORDLESS LITHIUM ION DRILL & DRIVER COMBO KIT Instruction Manual ATD 10525 12V CORDLESS LITHIUM ION DRILL & DRIVER COMBO KIT Instruction Manual KNOW YOUR PRODUCT (DRILL) 1. Keyless chuck 2. Torque adjustment collar 3. Speed selector 4. Forward/reverse selector 5. Battery

More information

OWNER S TECHNICAL MANUAL

OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL 18V Cordless Grease Gun 450g 670AN3 Description These model guns are designed to dispense petroleum-based greases (up to NLGI 2) for general lubrication applications. A 36-inch

More information

MULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX MSW Multi-purpose Saw. Blades x 3.

MULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX MSW Multi-purpose Saw. Blades x 3. WHAT S IN THE BOX MULTI PURPOSE SAW 500W INSTRUCTION MANUAL SPECIFICATIONS Input: Voltage: No Load Speed: Stroke Length: Blade Fitment: Cutting Capacity: Weight: ozito.com.au 500W 230-240V ~ 50Hz 500-3000

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill DDF448 DDF458 0694 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DDF448 DDF458 Drilling into

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill DDF448 DDF458 0694 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DDF448 DDF458 Drilling into

More information