Product Catalogue 2018 V2.5. COCKPIT SMART HOME d.o.o. Tel web.

Transcription

1 Product Catalogue 2018 V2.5 COCKPIT SMART HOME d.o.o. Ulica Klementa Juga Solkan, Slovenia Tel Info@yourcockpit.biz web.

2 PRODUCT CATALOGUE Table of contents Page # Item Page # Item 1 Main Gateway 17 Door/Window Sensor 2 Single On/Off 18 3-IN-1 Sensor 3 Single On/Off D 18 Flood Detector 4 Double On/Off 19 Siren 5 Dimmer 19 Repeater 6 6 Dimmer 0-10V 20 Smart Plug 7 DIN Dimmer 20 Smart Plug 16A 8 RGBW Dimmer 21 Indoor IP Camera 9 Shutter 21 Outdoor IP Camera 10 Shutter DC 22 IKA232-20/230 V 11 Weather Station 22 BIOCOM WM1 12 PMW Thermostat 23 1-Phase Smart Meter 13 On/Off Thermostat 24 3-Phase Smart Meter 14 Heat & Cool Thermostat 25 2M Casing SET 15 Temperature Sensor 25 Wall Mounted Casing 16 Radiator Thermostat 25 Surface door sensor 16 RS Room Sensor 26 Order Form 17 A/C Control 27 Z-wave frequencies & Plug types

3 Main Gateway Ordering Code: CKNOAD1 (Previous Ordering Codes: CK-GW2-EU/ CKNGWD1) COCKPIT main Gateway is used to Configure wireless network, Control switches, dimmers, motion sensors, temperature sensors, and other modules/devices (elements of home automation) & Support creation of scenes, schedules, events and notifications. Through any ios or Android device (PC, tablet, Smartphone) allows: home automation control and supervision, video monitoring (IP cameras) & energy metering. RJ45 Ethernet port FRONT and BACK (hidden) button RGB LED for user interaction Power Supply Adapter (AC/DC): input ~ V, 0.3 A, 50/60 Hz; output DC 5 V, 2 A Micro USB port for power supply only Wireless Wireless network n, 2.4Ghz compatible Z-Wave for EU market Operating temperature Indoor usage only, 40 C max Hardware MIPS 24Kc CPU with 650MHz clock Flash Memory: SPI NAND 128MB Memory: DDR2 64MB Dimensions: 108x108x26.7mm (WxDxH) 1

4 Single On/Off Ordering Code: CKNHAD1 (Old Ordering Code: CK-INW-SW1-EU) On/Off module switches On or Off the electrical device (e.g. light, fan, etc...). It can be controlled either through a wireless network or through the wall switch. The module is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. Module measures power consumption of electrical device and supports connection of digital temperature sensor. Power supply: 110V - 230VAC +/-10%, 50/60Hz, 24-30VDC Rated load current of AC output (resistive load): 1x10A / 230VAC Rated load current of DC output (resistive load): 1x10A / 30VDC Output circuit power of AC output (resistive load): 2300W (230VAC) Output circuit power of DC output (resistive load): 240W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: P=5~50W, ±3W P>50W, ± 3% Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Package dimensions (WxHxD): 79mm x 52mm x 22mm Weight: 28g Brutto weight (package): 34g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay 2

5 Single On/Off D Ordering Code: CKNHND1 (Old Ordering Code: CK-INW-SW1D-EU) On/Off D module switches On or Off the electrical device (e.g. light, fan, etc...). Output contact is voltage free (dry contact), so also loads with different power supply can be connected to the module. The module can be controlled either through a wireless network or through the wall switch. The module is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. Module supports connection of digital temperature sensor. Power supply: 110V - 230VAC +/-10%, 50/60Hz, 24-30VDC Rated load current of AC output (resistive load): 1x10A / 230VAC Rated load current of DC output (resistive load): 1x10A / 30VDC Output circuit power of AC output (resistive load): 2300W (230VAC) Output circuit power of DC output (resistive load): 240W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Package dimensions: 79mm x 52mm x 22mm Weight: 28g Brutto weight (package): 34g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay 3

6 Double On/Off Ordering Code: CKNHBD1 (Old Ordering Code: CK-INW-SW2-EU) Double On/Off switches On or Off two electrical devices (e.g. lights, fans, etc...). It can be controlled either through a wireless network or through the wall switches. The module is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. It measures power consumption of two electrical devices and supports connection of digital temperature sensor. Power supply: VAC ±10% 50/60Hz, 24-30VDC Rated load current of AC output (resistive load): 2x4A / 230VAC Rated load current of DC output (resistive load): 2x4A / 30VDC Output circuit power of AC output (resistive load): 2x920W (230VAC) Output circuit power of DC output (resistive load): 2x96W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: P=0~200W, ±2 W P>200W, ± 3% Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm Package dimensions: 79mm x 52mm x 22mm Weight: 28g Brutto weight (package): 34g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay (2x) 4

7 Dimmer Ordering Code: CKNHDD1 (Old Ordering Code: CK-INW-DIM1-EU) Dimmer is the first MOSFET-switching lights device that also supports control of low-voltage halogen lamps with electronic transformer, dimmable compact fluorescent lights and dimmable LED bulbs. It also measures the power consumption of electrical devices and supports the connection of a digital temperature sensor. Dimmer dims the light. It can be controlled either through a wireless network or through the wall switch. It is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. Power supply: VAC ±10% 50/60Hz, 24-30VDC Rated load current of AC output: 0,6A / 230VAC Rated load current of DC output: 0,85A / 30VDC Output circuit power of AC output (resistive load): 140W (230VAC)* Output circuit power of DC output (resistive load): 21W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: ±2W Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Package dimensions: 79mm x 52mm x 22mm Weight: 28g Brutto weight (package): 34g Electricity consumption: 0,7W For installation in boxes: Ø 60mm or 2M Switching: MOSFET 5

8 Dimmer 0-10V Ordering Code: CKNHVD1 (Old Ordering Code: CK-INW-DIMFLV-EU) Dimmer 0-10V module is used for dimming lights, fan speed regulation and control of any other device with 0-10V input control. Module has a standard 0-10V output and a multi-function input, which may be a push button / switch, a potentiometer or 0-10V signal. Power supply: 12-24VDC Max. sinking control voltage: -20 / +20VDC Max. sourcing control voltage: 0-11VDC Max. sinking current: 2mA Max. sourcing current: 10mA Digital temperature sensor range (sensor must be ordered separately): 50 ~ +125 C Operation temperature: -10 ~ +40 C Distance: up to 30 m indoors (depending on building materials) Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Package dimensions (WxHxD): 79mm x 52mm x 22mm Weight (Brutto with package): 28g (34g) Electricity consumption: 0,5W 6

9 DIN Dimmer Ordering Code: CKNHSD1 (Old Ordering Code: CK-DIN-DIM1-EU) DIN Dimmer is used for dimming bulbs. The module can be controlled either through a Z-Wave network or through the wall switch. The module is designed to be mounted inside an electrical cabinet onto DIN rail. Module measures power consumption of bulb and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network. Power supply: VAC ±10% 50/60Hz, 24-30VDC Rated load current of AC output: 0,85A/ 230VAC Rated load current of DC output: 0,85A / 30VDC Output circuit power of AC output (resistive load): 200W (230VAC) Output circuit power of DC output (resistive load): 21W (24VDC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Distance: up to 30m indoors (depending on building materials) Dimensions (WxHxD): 18x93x58mm Package dimensions (WxHxD): 21x95x64mm Weight: 50g Brutto weight (package): 56g Electricity consumption: 0,7W For installation in boxes: DIN rail 35mm Switching: MOSFET (Trailing edge) 7

10 RGBW Dimmer Ordering Code: CKNHWD1 (Old Ordering Code: CK-INW-RGBW-EU) RGBW Dimmer is designed to control your RGB/RGBW strips and LED strips or bulbs in order to create countless color options and includes 5 special scene effects (Ocean, Lightning, Rainbow, Snow and Sun). The wide range of colors lets you paint your home according to your mood. Highlight your favourite wall by illuminating a picture on it in tones that you choose yourself. The module can work in combination with the other Z-Wave devices in your house. You can control it either remotely through the Z-Wave network or through wall switches. Power supply: 12-24VDC PWM output frequency: 488Hz Rated output power: 8A for single output channel,13a at max.(3,25a for R.G.B.W. single output channel is suggested) Max load (e.g. halogen bulbs): At 12V- 156W combined; At 24V- 312W combined LED Indicator: Red/Green Operation temperature: 0~40 C Distance: up to 30 m indoors (depending on building materials) Dimensions (WxHxD): 40.5 mm x 32 mm x 14.5 mm Package dimensions: 79 mm x 52 mm x 22 mm Weight: 28 g Gross weight (packaging included): 34 g Electricity consumption: 12V: 0.48W; 24V: 0.72W 8

11 Shutter Ordering Code: CKNHCD1 (Old Ordering Code: CK-INW-SH1-EU) Shutter controls the motor of blinds, rollers, shades, venetian blinds, windows, etc It also supports venetian blind slats tilting. The module can be controlled either through a wireless network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end switches. It is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. Module measures power consumption of motor and supports connection of digital temperature sensor. Power supply: VAC ±10% 50/60Hz Rated load current of AC output (resistive load): 2x4A / 230VAC Output circuit power of AC output (resistive load): 2x920W (230VAC) Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: P=0-200W, +/-2W; P>200W, +/-3%; Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm Package dimensions: 79mm x 52mm x 22mm Weight: 28g Brutto weight (package): 34g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay (2x) 9

12 Shutter DC Ordering Code: CKNHOD1 (Old Ordering Code: CK-INW-SH1DC-EU) Shutter DC controls the 12-24VDC motor of blinds, rollers, shades, venetian blinds, windows, etc It also supports venetian blind slats tilting. The module can be controlled either through a wireless network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end switches. The module is designed to be mounted inside a flush mounting box and is hidden behind a traditional wall switch. It measures power consumption of motor and supports connection of digital temperature sensor. Power supply: 12-24VDC +/-10% Rated load current of DC output (resistive load): 2A Overcurrent protection: 6A Output circuit power of DC output (resistive load): 48W Digital temperature sensor range (sensor must be ordered separately): -50 ~ 125 C Operation temperature: -10 ~ 40 C Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: +/-5% Distance: up to 30m Dimensions (WxHxD): 41,8mm x 36,8mm x 15,4mm Package dimensions: 79mm x 52mm x 22mm Weight: 28g Brutto weight (package): 34g Electricity consumption: cca. 0,3W For installation in boxes: Ø 60mm or 2M Switching: H bridge 10

13 Weather Station Ordering Code: CKNHZD1 (Old Ordering Code: CK-WST-EU) Weather Station is used for measuring wind direction, wind velocity, wind gust, temperature, wind chill, rain rate, indoor/outdoor temperature and indoor/ outdoor humidity. The four sensors measures 10 weather properties in total. The Weather Station includes 4 sensors: two Thermo-Hygrometers (with LCD display), Anemometer (Wind Sensor) and Rain Sensor. Dimensions (WxHxD): 460x120x430mm Weight: 2kg USB Key Power supply: USB Power Supply, 5V DC Operation temperature: -10 ~ +40 C Distance to NETIC: up to 30 m indoors (depending on building materials) Distance to 433Mhz Sensors: up to 100 m (depending on building materials) Dimensions (WxHxD): 79x16x24mm Electricity consumption: 0,3 W 433MHz Sensors Batteries: 2 x UM-3 or AA size 1.5 V Operation temperature: -10 ~ +60 C Distance to USB Key: up to 100 m (depending on building materials) Receiving Cycle: Remote Thermo/Hygro -Sensors cca. 45s; Rain Gauge cca. 183s; Wind Sensor cca.33s Temperature Accuracy: +/-1 C or +/-2 F Humidity Accuracy: +/-5% Wind Speed Accuracy: +/- ( 2mph + 5% ) Wind Direction Accuracy: +/

14 PMW Thermostat Ordering Code: CKNHLD1 (Old Ordering Code: CK-INW-TST-EU) PWM Thermostat allows you to control floor heating or radiator. It replaces big room wall thermostat, because the temperature set point is set through a a wireless network. As it is connected directly to either 230VAC or 24VDC, no batteries are required. Power supply: VAC ±10%, 50 / 60 Hz, (24 30 VDC) Rated load current of AC output: 0.85 A / 230 VAC Rated load current of DC output: 0.85 A / 30 VDC Output circuit power of AC output (resistive load): 200 W (230 VAC) Output circuit power of DC output (resistive load): 21 W (24 VDC) Power measurement accuracy: +/-2 W Digital temperature sensor range: -50 ~ +125 C, resolution 0.1 C Digital temperature sensor cable length: 1000 mm Operation temperature: -10 ~ +40 C Distance: up to 30 m indoors (depending on building materials) Dimensions (WxHxD) : 41.8 x 36.8 x 15.4 mm Packaging: 115 x 96 x 22 mm Weight (including packaging): 48 g (64 g) Electricity consumption: 0.7 W For installation in boxes: Ø 60 mm or 2 M Switching: MOSFET 12

15 On/Off Thermostat Ordering Code: CKNHID1 (Old Ordering Code: N/A) On/Off thermostat is ideal for directly controlling electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. You can control it either remotely through the Z-Wave network or through wall switches. It also measures power consumption and supports the connection of a digital temperature sensor. Power supply: VAC ± 10%60 / 50 ת Hz, (24 30 VDC) Rated load current of AC output (resistive load): 1 X 10 A / 230 VAC Rated load current of DC output (resistive load): 1 X 10 A / 30 VDC Output circuit power of AC output (resistive load): 2300 W (230 VAC) Output circuit power of DC output (resistive load): 240 W (24 VDC) Power measurement accuracy: P = 5 50 W, +/- 3 W, P > 50 W, +/-3% Digital temperature sensor range: -50 ~ +125 C, resolution 0.1 C Digital temperature sensor cable length: 1000 mm Operation temperature: -10 ~ +40 C Distance: up to 30 m indoors (depending on building materials) Dimensions (WxHxD) : 41.8 x 36.8 x 15.4 mm Packaging Dimensions: 115 x 96 x 22 mm Weight (including packaging): 48 g (64 g) Electricity consumption: 0.4 W For installation in boxes: Ø 60 mm or 2 M Switching: Relay 13

16 Heat & Cool Thermostat Ordering Code: CKNHKD1 (Previous Ordering Codes: CK-INW-HCTST-E/ CKWHKE1) Heat & Cool Thermostat allows you to control 4 pipes fan coil or cooling beam. It replaces big room wall thermostat, because the temperature set point is set through a a wireless network. As it is connected directly to either 230VAC or 24VDC, no batteries are required. Power supply: VAC ±10% 50/60Hz, 24-30VDC Rated load current of AC output (resistive load): 2x4A / 230VAC Rated load current of DC output (resistive load): 2x4A / 30VDC Output circuit power of AC output (resistive load): 2x920W (230VAC) Output circuit power of DC output (resistive load): 2x96W (24VDC) Monitoring: - Electrical power load in W - Electric energy consumption in kwh Power monitoring accuracy: P=0-200W, +/-2W; P>200W, +/-3%; Operation temperature: -10 ~ 40 C Distance: up to 30 m indoors (depending on building materials) Dimensions (WxHxD): 41,8mm x 36,8mm x 16,9mm Package dimensions: 115mm x 96mm x 22mm Weight: 48g Brutto weight (package): 64g Electricity consumption: 0,4W For installation in boxes: Ø 60mm or 2M Switching: Relay (2x) Digital temperature sensor range: -50 ~ 125 C, resolution 0.1 C Digital temperature sensor cable length: 1000mm 14

17 Temperature Sensor Ordering Code: CKNHEA1 (Previous Ordering Codes: CK-TMPW-EU/ CKNHED1 ) wave Frequency: 868,4MHz Digital Temperature Sensor has 1m cable with connector to connect directly to: Dimmer, Shutter, Shutter DC, On/Off, On/Off D, Double On/Off modules. Digital temperature sensor range is from -50 ~ 125 C. The lenght of the cable is 1000mm

18 Radiator Thermostat Ordering Code: CKNPAD1 (Previous Ordering Codes: CK-STR-EU/ CKNRTD1) RS Room Sensor Ordering Code: CKNPBD1 (Previous Ordering Codes: CK-RSRS-EU/ CKNRSD1) Radiator Thermostat controls radiator heating valves. Power supply: 2x1.5V AA alkaline batteries, class III (SELV) Low battery indication. Operation temperature: 0 ~ 40 C Temperature setpoint range: 4 ~ 28 C Maximum water temperature: 90 C Distance: up to 30m. Dimensions: L: 91mm Ø: 51 (RA) Weight: 177g Protection Class: IP 20 Package includes: module, AA alkaline batteries (x2), adapter RS Room Sensor is a battery operated temperature sensor. When included into Z-Wave wireless network, its buttons can also be used to control the heating system. Battery: Alkaline 2 x AA, 1.5 V Battery lifetime: Up to 4-5 years Backlight: Green LED Ambient temperature: 0 to +40 C Battery monitoring: The sensor has a built-in monitoring circuit, which will detect low or critical battery level. Transmission frequency: MHz Transmission range in normal buildings: Up to 30 m Transmission power: Max. 1 mw IP class: 21 Dimensions: 81 mm x 66 mm x 21 mm 16

19 A/C Control Ordering Code: CKNPCD1 (Previous Ordering Codes: CK-AC-EU/ CKNACD1) Door/Window Sensor Ordering Code: CKNPDD1 (Previous Ordering Codes: CK-DWS-EU/ CKNDWD1) A/C Control translates wireless commands to AC IR control code. It has a built in temperature sensor which allows Base unit to get the current room temperature. Door/Window Sensor module detects the opening or closing of a window or door. Power supply: USB Power DC 5V 100mA or 3xAAA dry batteries Low battery indication. Operation temperature: 0 ~ 40 C RF operating distance: up to 25m IR operating distance: up to 8m line of sight IP learning: max. 23 commands Dimensions: Ø =70mm, T = 18mm (Main unit) Ø =70mm, T = 15.5mm (Battery chassis) Weight: 60 g Protection Class: IP 20 Package includes: module (battery and USB cable not included) Power supply: 2xCR V 620mAh Lithium Battery Low battery indication Operation temperature: -10 ~ 40 C Operation humidity: 85%RH max The device is for indoor use only Distance: up to 30m Dimensions (WxHxD): 31mm x 70mm x 11.5mm Weight: 23,6 g (without batteries) Protection Class: IP 20 Package includes: module, CR2450 batteries (2x), mounting kit

20 3-IN-1 Sensor Ordering Code: CKNPED1 (Previous Ordering Codes: CK-MULTI-EU/ CKNMSD1) Flood Detector Ordering Code: CKNPFD1 ((Previous Ordering Code: CHNFDD1) Multisensor 3in1 is a battery powered allin-one motion sensor, temperature sensor, and lighting sensor. When the sensor detects motion in front of its viewing window, it will send wireless signal to the network. The sensor can report current temperature, and lighting levels in the immediate vicinity. Power supply: CR123A lithium battery Frequency Range: MHz Operation temperature: -10 ~ 40 C Operation humidity: 85%RH max Distance: App. 30m indoor Dimensions (WxHxD): 28mm x 96mm x 23mm Weight: 39g Flood detector module detects flood in residential buildings and send a trigger for alarm purposes. Power supply: 3x1.5V AA batteries Low battery indication Operation temperature: -10 ~ 50 C Operation humidity: 85%RH max The device is for indoor use Distance: up to 30m Dimensions (WxHxD): 85mm x 85mm x 39mm Weight: 250 g (without batteries) Wireless communication 868,42MHz, EIRP: -6.0dBm Protection Class: IP 44 Package includes: module, AA batteries (x3), mounting kit 18

21 Siren Ordering Code: CKNPGD1 (Previous Ordering Codes: CK-SIREN-EU/ CKNSID1) Repeater 6 Ordering Code: CKNOHD1 (Previous Ordering Codes: CK-RPT-EU/ CKNRED1) Siren warns people in the building by a loud sound and a flashing light (strobe) that an alarm has occurred. Power supply: 4xAA batteries Battery life time: 1 year, for safety reason, replace new battery whenever Siren is triggered Operation temperature: -15 ~ 60 C Visible alarm: yes, flashing light (strobe) Sound level: 105dB Tamper alarm: yes Auto stop: Yes (after 30 seconds) The device is for indoor use only Distance: up to 30m Dimensions (WxHxD): 116mm x 77mm x 40mm Weight: 130 g Package includes: module, 4xAA batteries, mounting kit. Repeater extends the wireless communication. It can increase and improve network distance range. Power supply: 230VAC 50Hz Operation temperature: 0 ~ 40 C Operation humidity: 85%RH max The device is for indoor use. Distance: up to 30m Dimensions (WxHxD): 44mm x 44mm x 57mm 18 19

22 Smart Plug Ordering Code: CKNODD1 (Previous Ordering Codes: CK-PMS-EU/ CKNHYD1) Smart Plug 16A Ordering Code: CKNHYD1 (Old Ordering Code: N/A) 20 Smart Plug switches all kinds of loads. Local operation is possible by pressing the button on the module. Module measures power consumption. It has also integrated function Auto shut off (when overloaded) and After black out remember function. Power supply: 230VAC, 50Hz Maximum load: 13A resistive load Operation temperature: 0 ~ 40 C The device is for indoor use only Distance: up to 30m (indoor) Dimensions (WxHxD): 57.7mm x 94.5mm x 76.6mm Weight: 118 g Protection Class: IP 20 The Smart Plug 16A also acts as a Z-Wave repeater to improve the range and stability of the Z-Wave network. It can be used in many different scenes, which can help make your life more comfortable. There are countless of other options for how to use Smart Plug 16A to remotely control devices via your smartphone. Input voltage: 230V +/- 10% / 50Hz Power load: Max.: 16A resistive (Duration: > cycles with resistive load) Overload protection: By STPM32 > 16A Power consumption: < 1 W max Housing dimensions 43 x 52 x 75 mm Housing colour: white Weight (ex. packaging): ~ 80g Operating temperature: C ( F); <80% U.R. non-condensing Storage operation: C ( F); <80% U.R. non-condensing Plug & Socket type: Plug Type F, Socket compatible with type C, E and F

23 Indoor IP Camera Ordering Code: CKNOLIN (Previous Ordering Code: CKNIPCI) Outdoor IP Camera Ordering Code: CKNOPOU (Previous Ordering Code: CKNIPCO) 1.3MP C Series Wi-Fi Network Camera. 125 Degrees veiw angle.. 3MP HD Wi-Fi IR Mini Outdoor Bullet Camera. 1/3 1.3Megapixel progressive CMOS H.264& MJPEG dual-stream encoding 25/30fps@1.3M ( ) 125 horizontal view angle IR Diatance 10m Easy4ip cloud support Wi-Fi Support Micro SD card slot, up to 128GB DC5V1A 1/3 3Megapixel progressive scan CMOS H.264&MJPEG dual-stream encoding Max 20fps@3M( ) & 25/30fps@1080P ( ) DWDR, Day/Night(ICR), 3DNR, AWB, AGC, BLC Multiple network monitoring: Web viewer, CMS(DSS/PSS) & DMSS 3.6mm fixed lens (2.8mm optional) Max. IR LEDs Length 30m IP67 Micro SD card slot, up to 128GB Easy4ip cloud support Wi-Fi support 20 21

24 IKA232-20/230 V Ordering Code: (Old Ordering Code: CK-DIN-2P) BIOCOM WM1 Ordering Code: (Old Ordering Code: CK-DIN-4P) IKA232-20/230V is accessory of Smart Meter. It is used for switching On or Off the electrical load up to 32A. Communication with Smart Meter: over terminals A1 on IKA and 5 on Smart Meter. BICOM WM1 is accessory of Smart Meter. It is used for switching On or Off the electrical load up to 32A. Communication with Smart Meter: optical (IR) communication port. Voltage: 230V ± 10%, 50-60Hz Current: 32A, 2 pole Operation temperature: C Storage temperature: C Dust/water protection: IP20 Weight: 130g Brutto weight (packaging included): 135g Installation: DIN rail 35mm Dimensions (W x H x D): 17,5 x 85 x 60mm Package dimensions (W x H x D): 20 x 95 x 70mm Coil consumption: 1.2W Voltage: 230V ± 10%, 50-60Hz Current: 32A, 4pole Operation temperature: C (>55 70 at max. impulse duration which is 1min) Storage temperature: C Dust/water protection: IP20 Weight: 250g Brutto weight (packaging included): 270g Installation: DIN rail 35mm Dimensions (W x H x D): 35,2 x 90 x 60mm Package dimensions (W x H x D): 40 x 95 x 70mm Coil consumption: 0.5W 22

25 1-Phase Smart Meter Ordering Code: CKNHTD1 (Old Ordering Code: CK-DIN-SM-EU) Smart Meter is used for energy measurements in single-phase electrical power network up to 65A. Meters measure energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals. The module can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network. Main terminals (LI, NI, Lo, No) Contacts capacity: (25) mm2 Connection screws: M5 Max torque: 3.5 Nm (PZ2) Optional terminals (1,2,4,5) Contact capacity: (2.5) mm Screws: M3 Max torque: 0.6 Nm Measuring input Type (connection): single phase (1b) Reference current (Iref): 5A Maximum current (Imax): 65A Minimum current (Imin): 0.25A Starting current: 20 ma Voltage (Un): 230 V (±20 %) Power consumption at Un: < 2W Nominal frequency (fn): 50 and 60 Hz Accuracy Active energy and power Standard EN : class 1 Standard EN : class B Reactive energy Standard EN : Class 2 Optical communication Type: IR - used to control BICOM WM1 Input (1) Rated voltage: 230 V (± 20%) Input resistance: 450 kohm Safety Indoor meter: yes Degree of pollution: 2 Protection class: II AC voltage test: 4 kv Installation Category: 300 Vrms cat. III Standard: EN Ambient conditions and EMC According standards for indoor active energy meters. Temperature and climatic condition according to EN Ambient conditions and Safety: According standards for indoor active energy meters. Temperature and climatic condition according to EN Dust/water protection: IP20 Operation temperature: C Storage temperature: C Enclosure material: self extinguish, complying UL94 V Indoor meter: yes Degree of pollution: 2 AC voltage test: 4 kv Standard: EN Distance: up to 30 m indoors (depending on building materials) Weight: 150g Brutto weight (packaging included): 170g Installation: DIN rail 35mm Dimensions (W x H x D): 36 x 90 x 64mm Package dimensions (W x H x D): 40 x 95 x 80mm Colour: RAL

26 Cockpit 3-Phase Smart Meter Ordering Code: CKNHXD1 (Old Ordering Code: N/A) 3-Phase Smart Meter is used for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications. Meter measure energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals. The module can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network. It is designed to be mounted on DIN rail Main terminals: (L1I, L2I, L3I, NO, L1O, L2O, L3O, NO) Contacts capacity: (25) mm2 Connection screws: M5 Max torque: 3.5 Nm (PZ2) Optional terminals: (DI, DO) Contact capacity: mm2 Screws: M3 Max torque: 1.2 Nm Measuring input: Type (connection): three phase (4u) Basic current (Ib): 5 A Maximum current (Imax): 80 A Minimum current (Imin): 0.25 A Starting current: 20 ma Reference voltage (Un): 3X230V/400V Power consumption at Un: < 8 VA Nominal frequency (fn): 50 and 60 Hz Accuracy: Active energy and power: Standard EN : class 1 Standard EN : class B Reactive energy: Standard EN : class 2 LED: Colour: red Pulse rate: 500 imp/kwh Led on: no load indication Optical communication: Type: IR - used to control BICOM IR Input (16): Rated voltage: 230 V (± 20%) Input resistance: 450 kohm LCD: Display 7+1 digit (100Wh resolution) Safety: Indoor Meter: yes Degree of pollution: 2 Protection class: II AC voltage test: 4 kv Installation Category: 300 Vrms cat. III Standard: EN

27 2M Casing SET Ordering Code: CKNHFA1 (Old Ordering Code: N/A) Temperature sensor can be installed behind this 2M casing SET. It is suitable for mounting on boxes Ø60 with claws. SET consists of: 1 x cover plate1, 2 x 1M perforated blank cover and 1 x mounting frame 2M with claws. 2M casing SET is made of PC/ABS material and comes in 2M dimmenssions. 2M casing set is available in polar white colour. Wall Mounted Casing Ordering Code: CKNHGA1 (Old Ordering Code: N/A) Temperature sensor can be installed inside this Wall mounted casing. The dimmenssions of the Wall mounted casing are 71mm x 71mm x 27mm. This casings are made from ABS material and are available in white colour. Surface Door Sensor Ordering Code: CKDJAA1 (Old Ordering Code: N/A) The sensor comes in three parts. The door mounted part is installed by two screws on the door. The second part, the door frame, is installed on the door frame, this part has 2 connectors for 2 wires. Third part is a cover for connectors. When the door is closed the door mounted part and the door frame should be aligned. 25

28 Order Form Date: Company Name: Billing Address: Shipping Address: Contact Person Name and Phone: PO reference number: Company VAT number: Type Ordering Code Net PPU Quantity Total Net Notes (Plug type, frequency etc )* Main Gateway CKNOAD1 Single On / Off CKNHAD1 Single On/Off D CKNHND1 Double On / Off CKNHBD1 Dimmer CKNHDD1 Dimmer 0-10V CKNHVD1 DIN dimmer CKNHSD1 RGBW Dimmer CKNHWD1 Shutter CKNHCD1 Shutter DC CKNHOD1 Weather Station CKNHZD1 PWM Thermostat CKNHLD1 On/off thermostat CKNHID1 Heat & Cool Thermostat CKNHKD1 Temperature Sensor CKNHEA1 Radiator Thermostat RS Room Sensor A/C control Door/Window Sensor 3-IN-1 Sensor Flood Detector Siren Repeater 6 Smart Plug Indoor IP Camera Outdoor IP Camera CKNPAD1 CKNPBD1 CKNPCD1 CKNPDD1 CKNPED1 CKNPFD1 CKNPGD1 CKNOHD1 CKNODD1 CKNOLIN CKNOPOU IKA232-20/230 V BICOM WM Phase Smart Meter 2M Casing SET Wall Mounted Casing Surface door sensor CKNHTD1 CKNHFA1 CKNHGA1 CKDJAA1 *Shipping SHIP - Will be added and billed saparatly after order delievery Total NET (excluding VAT) - -

29 Z-wave frequencies & Plug types Please note the following regional Z-wave frequencies when ordering outside of the EU: Region Frequency EU AUS US RUS ISR CN HK INDIA JP S. Korea Malesia Saudi Arabia Please note the following regional pluge type: Region EU UK, Cyprus PL, F, CZ, SK Israel Plug Type Type C, F Type G Type E Type H Following devices could be also subject to country specific power supply and frequency DIN dimmer Dimmer PWM Thermostat 1-Phase Smart Meter 3-Phase Smart Meter